Test Date: 2016-10-10 09:55
Analysis date: 2016-10-10 11:31
Logfile
commander_PixelAlive.log
[07:57:14.753] <TB2> INFO: *** Welcome to pxar ***
[07:57:14.754] <TB2> INFO: *** Today: 2016/10/10
[07:57:15.089] <TB2> INFO: *** Version: f5d3-dirty
[07:57:15.089] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//000_PixelAlive_p17//dacParameters35_C15.dat
[07:57:15.089] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//000_PixelAlive_p17//tbmParameters_C0b.dat
[07:57:15.089] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//000_PixelAlive_p17//defaultMaskFile.dat
[07:57:15.089] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//000_PixelAlive_p17//trimParameters35_C15.dat
[07:57:15.164] <TB2> INFO: clk: 4
[07:57:15.164] <TB2> INFO: ctr: 4
[07:57:15.164] <TB2> INFO: sda: 19
[07:57:15.164] <TB2> INFO: tin: 9
[07:57:15.164] <TB2> INFO: level: 15
[07:57:15.164] <TB2> INFO: triggerdelay: 0
[07:57:15.164] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[07:57:15.164] <TB2> INFO: Log level: INFO
[07:57:15.177] <TB2> INFO: Found DTB DTB_WXENWR
[07:57:15.188] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[07:57:15.190] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[07:57:15.191] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[07:57:16.733] <TB2> INFO: DUT info:
[07:57:16.733] <TB2> INFO: The DUT currently contains the following objects:
[07:57:16.733] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[07:57:16.733] <TB2> INFO: TBM Core alpha (0): 7 registers set
[07:57:16.733] <TB2> INFO: TBM Core beta (1): 7 registers set
[07:57:16.733] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[07:57:16.733] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:16.733] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[07:57:17.134] <TB2> INFO: enter 'restricted' command line mode
[07:57:17.134] <TB2> INFO: enter test to run
[07:57:17.134] <TB2> INFO: test: PixelAlive no parameter change
[07:57:17.134] <TB2> INFO: running: pixelalive
[07:57:17.139] <TB2> INFO: ######################################################################
[07:57:17.139] <TB2> INFO: PixTestAlive::doTest()
[07:57:17.139] <TB2> INFO: ######################################################################
[07:57:17.140] <TB2> INFO: ----------------------------------------------------------------------
[07:57:17.140] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[07:57:17.140] <TB2> INFO: ----------------------------------------------------------------------
[07:57:17.405] <TB2> INFO: Expecting 41600 events.
[07:57:20.612] <TB2> INFO: 41600 events read in total (2649ms).
[07:57:20.651] <TB2> INFO: Test took 3509ms.
[07:57:20.868] <TB2> INFO: PixTestAlive::aliveTest() done
[07:57:20.868] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[07:57:20.869] <TB2> INFO: ----------------------------------------------------------------------
[07:57:20.869] <TB2> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[07:57:20.869] <TB2> INFO: ----------------------------------------------------------------------
[07:57:21.128] <TB2> INFO: Expecting 41600 events.
[07:57:23.759] <TB2> INFO: 41600 events read in total (2075ms).
[07:57:23.761] <TB2> INFO: Test took 2890ms.
[07:57:23.761] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[07:57:23.996] <TB2> INFO: PixTestAlive::maskTest() done
[07:57:23.996] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[07:57:23.997] <TB2> INFO: ----------------------------------------------------------------------
[07:57:23.997] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[07:57:23.997] <TB2> INFO: ----------------------------------------------------------------------
[07:57:24.254] <TB2> INFO: Expecting 41600 events.
[07:57:27.648] <TB2> INFO: 41600 events read in total (2838ms).
[07:57:27.648] <TB2> INFO: Test took 3650ms.
[07:57:27.868] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[07:57:27.868] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[07:57:27.868] <TB2> INFO: PixTestAlive::doTest() done, duration: 10 seconds
[07:57:27.898] <TB2> INFO: enter test to run
[07:57:27.898] <TB2> INFO: test: no parameter change
[07:57:28.069] <TB2> QUIET: Connection to board 162 closed.
[07:57:28.149] <TB2> INFO: pXar: this is the end, my friend
commander_RetrimHotPixels.log
[08:02:53.004] <TB2> INFO: *** Welcome to pxar ***
[08:02:53.004] <TB2> INFO: *** Today: 2016/10/10
[08:02:53.071] <TB2> INFO: *** Version: f5d3-dirty
[08:02:53.072] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//dacParameters35_C15.dat
[08:02:53.072] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[08:02:53.072] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//defaultMaskFile.dat
[08:02:53.072] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C15.dat
[08:02:53.180] <TB2> INFO: clk: 4
[08:02:53.180] <TB2> INFO: ctr: 4
[08:02:53.180] <TB2> INFO: sda: 19
[08:02:53.180] <TB2> INFO: tin: 9
[08:02:53.180] <TB2> INFO: level: 15
[08:02:53.180] <TB2> INFO: triggerdelay: 0
[08:02:53.180] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[08:02:53.180] <TB2> INFO: Log level: INFO
[08:02:53.193] <TB2> INFO: Found DTB DTB_WXENWR
[08:02:53.204] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[08:02:53.206] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[08:02:53.208] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[08:02:54.773] <TB2> INFO: DUT info:
[08:02:54.773] <TB2> INFO: The DUT currently contains the following objects:
[08:02:54.774] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[08:02:54.774] <TB2> INFO: TBM Core alpha (0): 7 registers set
[08:02:54.774] <TB2> INFO: TBM Core beta (1): 7 registers set
[08:02:54.774] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[08:02:54.774] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:55.175] <TB2> INFO: enter 'restricted' command line mode
[08:02:55.175] <TB2> INFO: enter test to run
[08:02:55.175] <TB2> INFO: test: delay setting parameters: ->5<-
[08:02:55.175] <TB2> INFO: delay test by 5 seconds...
[08:03:00.175] <TB2> INFO: enter test to run
[08:03:00.175] <TB2> INFO: test: highrate no parameter change
[08:03:00.175] <TB2> INFO: running: highrate
[08:03:00.176] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[08:03:00.304] <TB2> INFO: ----------------------------------------------------------------------
[08:03:00.304] <TB2> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[08:03:00.304] <TB2> INFO: ----------------------------------------------------------------------
[08:03:00.304] <TB2> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[08:03:00.304] <TB2> INFO: edge/corner pixel THR is adjusted
[08:03:00.304] <TB2> INFO: PixTestHighRate::trimHotPixels: step 0...
[08:03:01.021] <TB2> INFO: Collecting data for 1 seconds...
[08:03:02.022] <TB2> INFO: Done with hot pixel readout
[08:03:06.696] <TB2> INFO: PixTest:: pg_setup set to default.
[08:03:06.698] <TB2> INFO: 0 hot pixels found in step 0
[08:03:06.731] <TB2> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[08:03:06.759] <TB2> INFO: PixTest::trimHotPixels() done
[08:03:06.759] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C0.dat
[08:03:06.765] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C1.dat
[08:03:06.771] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C2.dat
[08:03:06.778] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C3.dat
[08:03:06.784] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C4.dat
[08:03:06.790] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C5.dat
[08:03:06.796] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C6.dat
[08:03:06.803] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C7.dat
[08:03:06.809] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C8.dat
[08:03:06.815] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C9.dat
[08:03:06.821] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C10.dat
[08:03:06.828] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C11.dat
[08:03:06.834] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C12.dat
[08:03:06.840] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C13.dat
[08:03:06.846] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C14.dat
[08:03:06.853] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C15.dat
[08:03:06.859] <TB2> INFO: write masked pixels into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//defaultMaskFile.dat
[08:03:06.891] <TB2> INFO: enter test to run
[08:03:06.891] <TB2> INFO: test: no parameter change
[08:03:07.091] <TB2> QUIET: Connection to board 162 closed.
[08:03:07.171] <TB2> INFO: pXar: this is the end, my friend
commander_RetrimHotPixels.log
[08:02:53.004] <TB2> INFO: *** Welcome to pxar ***
[08:02:53.004] <TB2> INFO: *** Today: 2016/10/10
[08:02:53.071] <TB2> INFO: *** Version: f5d3-dirty
[08:02:53.072] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//dacParameters35_C15.dat
[08:02:53.072] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[08:02:53.072] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//defaultMaskFile.dat
[08:02:53.072] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C15.dat
[08:02:53.180] <TB2> INFO: clk: 4
[08:02:53.180] <TB2> INFO: ctr: 4
[08:02:53.180] <TB2> INFO: sda: 19
[08:02:53.180] <TB2> INFO: tin: 9
[08:02:53.180] <TB2> INFO: level: 15
[08:02:53.180] <TB2> INFO: triggerdelay: 0
[08:02:53.180] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[08:02:53.180] <TB2> INFO: Log level: INFO
[08:02:53.193] <TB2> INFO: Found DTB DTB_WXENWR
[08:02:53.204] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[08:02:53.206] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[08:02:53.208] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[08:02:54.773] <TB2> INFO: DUT info:
[08:02:54.773] <TB2> INFO: The DUT currently contains the following objects:
[08:02:54.774] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[08:02:54.774] <TB2> INFO: TBM Core alpha (0): 7 registers set
[08:02:54.774] <TB2> INFO: TBM Core beta (1): 7 registers set
[08:02:54.774] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[08:02:54.774] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:54.774] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[08:02:55.175] <TB2> INFO: enter 'restricted' command line mode
[08:02:55.175] <TB2> INFO: enter test to run
[08:02:55.175] <TB2> INFO: test: delay setting parameters: ->5<-
[08:02:55.175] <TB2> INFO: delay test by 5 seconds...
[08:03:00.175] <TB2> INFO: enter test to run
[08:03:00.175] <TB2> INFO: test: highrate no parameter change
[08:03:00.175] <TB2> INFO: running: highrate
[08:03:00.176] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[08:03:00.304] <TB2> INFO: ----------------------------------------------------------------------
[08:03:00.304] <TB2> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[08:03:00.304] <TB2> INFO: ----------------------------------------------------------------------
[08:03:00.304] <TB2> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[08:03:00.304] <TB2> INFO: edge/corner pixel THR is adjusted
[08:03:00.304] <TB2> INFO: PixTestHighRate::trimHotPixels: step 0...
[08:03:01.021] <TB2> INFO: Collecting data for 1 seconds...
[08:03:02.022] <TB2> INFO: Done with hot pixel readout
[08:03:06.696] <TB2> INFO: PixTest:: pg_setup set to default.
[08:03:06.698] <TB2> INFO: 0 hot pixels found in step 0
[08:03:06.731] <TB2> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[08:03:06.759] <TB2> INFO: PixTest::trimHotPixels() done
[08:03:06.759] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C0.dat
[08:03:06.765] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C1.dat
[08:03:06.771] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C2.dat
[08:03:06.778] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C3.dat
[08:03:06.784] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C4.dat
[08:03:06.790] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C5.dat
[08:03:06.796] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C6.dat
[08:03:06.803] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C7.dat
[08:03:06.809] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C8.dat
[08:03:06.815] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C9.dat
[08:03:06.821] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C10.dat
[08:03:06.828] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C11.dat
[08:03:06.834] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C12.dat
[08:03:06.840] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C13.dat
[08:03:06.846] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C14.dat
[08:03:06.853] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//trimParameters35_C15.dat
[08:03:06.859] <TB2> INFO: write masked pixels into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//002_RetrimHotPixels_150//defaultMaskFile.dat
[08:03:06.891] <TB2> INFO: enter test to run
[08:03:06.891] <TB2> INFO: test: no parameter change
[08:03:07.091] <TB2> QUIET: Connection to board 162 closed.
[08:03:07.171] <TB2> INFO: pXar: this is the end, my friend
[08:03:57.994] <TB2> INFO: *** Welcome to pxar ***
[08:03:57.994] <TB2> INFO: *** Today: 2016/10/10
[08:03:58.062] <TB2> INFO: *** Version: f5d3-dirty
[08:03:58.062] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//dacParameters35_C15.dat
[08:03:58.063] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//tbmParameters_C0b.dat
[08:03:58.063] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//defaultMaskFile.dat
[08:03:58.063] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C15.dat
[08:03:58.139] <TB2> INFO: clk: 4
[08:03:58.139] <TB2> INFO: ctr: 4
[08:03:58.139] <TB2> INFO: sda: 19
[08:03:58.139] <TB2> INFO: tin: 9
[08:03:58.139] <TB2> INFO: level: 15
[08:03:58.139] <TB2> INFO: triggerdelay: 0
[08:03:58.139] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[08:03:58.139] <TB2> INFO: Log level: INFO
[08:03:58.152] <TB2> INFO: Found DTB DTB_WXENWR
[08:03:58.164] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[08:03:58.166] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[08:03:58.167] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[08:03:59.704] <TB2> INFO: DUT info:
[08:03:59.704] <TB2> INFO: The DUT currently contains the following objects:
[08:03:59.704] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[08:03:59.704] <TB2> INFO: TBM Core alpha (0): 7 registers set
[08:03:59.704] <TB2> INFO: TBM Core beta (1): 7 registers set
[08:03:59.704] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[08:03:59.704] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[08:03:59.704] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[08:04:00.105] <TB2> INFO: enter 'restricted' command line mode
[08:04:00.105] <TB2> INFO: enter test to run
[08:04:00.105] <TB2> INFO: test: delay setting parameters: ->5<-
[08:04:00.105] <TB2> INFO: delay test by 5 seconds...
[08:04:05.105] <TB2> INFO: enter test to run
[08:04:05.105] <TB2> INFO: test: highrate no parameter change
[08:04:05.105] <TB2> INFO: running: highrate
[08:04:05.105] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//phCalibrationFitErr35_C15.dat
[08:04:05.235] <TB2> INFO: ----------------------------------------------------------------------
[08:04:05.235] <TB2> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[08:04:05.235] <TB2> INFO: ----------------------------------------------------------------------
[08:04:05.235] <TB2> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[08:04:05.235] <TB2> INFO: edge/corner pixel THR is adjusted
[08:04:05.235] <TB2> INFO: PixTestHighRate::trimHotPixels: step 0...
[08:04:05.952] <TB2> INFO: Collecting data for 1 seconds...
[08:04:06.954] <TB2> INFO: Done with hot pixel readout
[08:04:09.966] <TB2> INFO: PixTest:: pg_setup set to default.
[08:04:09.967] <TB2> INFO: 0 hot pixels found in step 0
[08:04:09.974] <TB2> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[08:04:10.022] <TB2> INFO: PixTest::trimHotPixels() done
[08:04:10.022] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C0.dat
[08:04:10.028] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C1.dat
[08:04:10.034] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C2.dat
[08:04:10.040] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C3.dat
[08:04:10.046] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C4.dat
[08:04:10.052] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C5.dat
[08:04:10.058] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C6.dat
[08:04:10.064] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C7.dat
[08:04:10.070] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C8.dat
[08:04:10.076] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C9.dat
[08:04:10.082] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C10.dat
[08:04:10.089] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C11.dat
[08:04:10.095] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C12.dat
[08:04:10.101] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C13.dat
[08:04:10.107] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C14.dat
[08:04:10.113] <TB2> INFO: write trim parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//trimParameters35_C15.dat
[08:04:10.119] <TB2> INFO: write masked pixels into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//003_RetrimHotPixels_50//defaultMaskFile.dat
[08:04:10.151] <TB2> INFO: enter test to run
[08:04:10.151] <TB2> INFO: test: no parameter change
[08:04:10.420] <TB2> QUIET: Connection to board 162 closed.
[08:04:10.500] <TB2> INFO: pXar: this is the end, my friend
commander_HRData.log
[08:05:02.918] <TB2> INFO: *** Welcome to pxar ***
[08:05:02.918] <TB2> INFO: *** Today: 2016/10/10
[08:05:02.986] <TB2> INFO: *** Version: f5d3-dirty
[08:05:02.986] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//004_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//004_HRData_50//dacParameters35_C15.dat
[08:05:02.987] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//004_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//004_HRData_50//tbmParameters_C0b.dat
[08:05:02.987] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//004_HRData_50//defaultMaskFile.dat
[08:05:02.987] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//004_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//004_HRData_50//trimParameters35_C15.dat
[08:05:03.079] <TB2> INFO: clk: 4
[08:05:03.079] <TB2> INFO: ctr: 4
[08:05:03.079] <TB2> INFO: sda: 19
[08:05:03.079] <TB2> INFO: tin: 9
[08:05:03.079] <TB2> INFO: level: 15
[08:05:03.079] <TB2> INFO: triggerdelay: 0
[08:05:03.079] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[08:05:03.079] <TB2> INFO: Log level: INFO
[08:05:03.093] <TB2> INFO: Found DTB DTB_WXENWR
[08:05:03.104] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[08:05:03.106] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[08:05:03.108] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[08:05:04.645] <TB2> INFO: DUT info:
[08:05:04.645] <TB2> INFO: The DUT currently contains the following objects:
[08:05:04.645] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[08:05:04.645] <TB2> INFO: TBM Core alpha (0): 7 registers set
[08:05:04.645] <TB2> INFO: TBM Core beta (1): 7 registers set
[08:05:04.645] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[08:05:04.645] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:04.645] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[08:05:05.046] <TB2> INFO: enter 'restricted' command line mode
[08:05:05.046] <TB2> INFO: enter test to run
[08:05:05.046] <TB2> INFO: test: delay setting parameters: ->5<-
[08:05:05.046] <TB2> INFO: delay test by 5 seconds...
[08:05:10.046] <TB2> INFO: enter test to run
[08:05:10.046] <TB2> INFO: test: Xray no parameter change
[08:05:10.046] <TB2> INFO: running: xray
[08:05:10.046] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//004_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//004_HRData_50//phCalibrationFitErr35_C15.dat
[08:05:10.254] <TB2> INFO: ######################################################################
[08:05:10.254] <TB2> INFO: PixTestXray::doTest()
[08:05:10.254] <TB2> INFO: ######################################################################
[08:05:10.254] <TB2> INFO: ----------------------------------------------------------------------
[08:05:10.254] <TB2> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[08:05:10.254] <TB2> INFO: ----------------------------------------------------------------------
[08:05:10.977] <TB2> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[08:05:18.279] <TB2> INFO: run duration 7 seconds, buffer almost full (81%), pausing triggers.
[08:05:42.729] <TB2> INFO: Resuming triggers.
[08:05:50.034] <TB2> INFO: run duration 14 seconds, buffer almost full (81%), pausing triggers.
[08:06:15.226] <TB2> INFO: Resuming triggers.
[08:06:22.532] <TB2> INFO: run duration 21 seconds, buffer almost full (81%), pausing triggers.
[08:06:46.731] <TB2> INFO: Resuming triggers.
[08:06:54.188] <TB2> INFO: run duration 29 seconds, buffer almost full (81%), pausing triggers.
[08:07:19.980] <TB2> INFO: Resuming triggers.
[08:07:27.284] <TB2> INFO: run duration 36 seconds, buffer almost full (81%), pausing triggers.
[08:07:52.023] <TB2> INFO: Resuming triggers.
[08:07:59.327] <TB2> INFO: run duration 43 seconds, buffer almost full (81%), pausing triggers.
[08:08:24.509] <TB2> INFO: Resuming triggers.
[08:08:31.815] <TB2> INFO: run duration 51 seconds, buffer almost full (81%), pausing triggers.
[08:08:56.890] <TB2> INFO: Resuming triggers.
[08:09:04.190] <TB2> INFO: run duration 58 seconds, buffer almost full (81%), pausing triggers.
[08:09:29.584] <TB2> INFO: Resuming triggers.
[08:09:36.886] <TB2> INFO: run duration 65 seconds, buffer almost full (81%), pausing triggers.
[08:10:02.256] <TB2> INFO: Resuming triggers.
[08:10:09.555] <TB2> INFO: run duration 72 seconds, buffer almost full (81%), pausing triggers.
[08:10:35.930] <TB2> INFO: Resuming triggers.
[08:10:43.230] <TB2> INFO: run duration 80 seconds, buffer almost full (81%), pausing triggers.
[08:11:08.960] <TB2> INFO: Resuming triggers.
[08:11:16.256] <TB2> INFO: run duration 87 seconds, buffer almost full (81%), pausing triggers.
[08:11:42.418] <TB2> INFO: Resuming triggers.
[08:11:49.718] <TB2> INFO: run duration 94 seconds, buffer almost full (81%), pausing triggers.
[08:12:14.241] <TB2> INFO: Resuming triggers.
[08:12:19.397] <TB2> INFO: data taking finished, elapsed time: 100 seconds.
[08:12:36.022] <TB2> INFO: PixTest:: pg_setup set to default.
[08:12:36.023] <TB2> INFO: PixTestXray::doPhRun() done
[08:12:36.023] <TB2> INFO: PixTestXray::doTest() done
[08:12:36.194] <TB2> INFO: enter test to run
[08:12:36.194] <TB2> INFO: test: no parameter change
[08:12:36.442] <TB2> QUIET: Connection to board 162 closed.
[08:12:36.525] <TB2> INFO: pXar: this is the end, my friend
commander_HRData.log
[08:13:16.393] <TB2> INFO: *** Welcome to pxar ***
[08:13:16.393] <TB2> INFO: *** Today: 2016/10/10
[08:13:16.473] <TB2> INFO: *** Version: f5d3-dirty
[08:13:16.473] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//005_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//005_HRData_150//dacParameters35_C15.dat
[08:13:16.473] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//005_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//005_HRData_150//tbmParameters_C0b.dat
[08:13:16.473] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//005_HRData_150//defaultMaskFile.dat
[08:13:16.473] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//005_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//005_HRData_150//trimParameters35_C15.dat
[08:13:16.549] <TB2> INFO: clk: 4
[08:13:16.549] <TB2> INFO: ctr: 4
[08:13:16.549] <TB2> INFO: sda: 19
[08:13:16.549] <TB2> INFO: tin: 9
[08:13:16.549] <TB2> INFO: level: 15
[08:13:16.549] <TB2> INFO: triggerdelay: 0
[08:13:16.549] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[08:13:16.550] <TB2> INFO: Log level: INFO
[08:13:16.563] <TB2> INFO: Found DTB DTB_WXENWR
[08:13:16.574] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[08:13:16.576] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[08:13:16.578] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[08:13:18.116] <TB2> INFO: DUT info:
[08:13:18.116] <TB2> INFO: The DUT currently contains the following objects:
[08:13:18.116] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[08:13:18.116] <TB2> INFO: TBM Core alpha (0): 7 registers set
[08:13:18.116] <TB2> INFO: TBM Core beta (1): 7 registers set
[08:13:18.116] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[08:13:18.116] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.116] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.116] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.116] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.116] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.116] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.116] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.116] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.116] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.116] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.117] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.117] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.117] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.117] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.117] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.117] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[08:13:18.518] <TB2> INFO: enter 'restricted' command line mode
[08:13:18.518] <TB2> INFO: enter test to run
[08:13:18.518] <TB2> INFO: test: delay setting parameters: ->5<-
[08:13:18.518] <TB2> INFO: delay test by 5 seconds...
[08:13:23.518] <TB2> INFO: enter test to run
[08:13:23.518] <TB2> INFO: test: Xray no parameter change
[08:13:23.518] <TB2> INFO: running: xray
[08:13:23.518] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//005_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//005_HRData_150//phCalibrationFitErr35_C15.dat
[08:13:23.662] <TB2> INFO: ######################################################################
[08:13:23.662] <TB2> INFO: PixTestXray::doTest()
[08:13:23.662] <TB2> INFO: ######################################################################
[08:13:23.662] <TB2> INFO: ----------------------------------------------------------------------
[08:13:23.662] <TB2> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[08:13:23.662] <TB2> INFO: ----------------------------------------------------------------------
[08:13:24.386] <TB2> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[08:13:28.356] <TB2> INFO: run duration 3 seconds, buffer almost full (81%), pausing triggers.
[08:13:53.759] <TB2> INFO: Resuming triggers.
[08:13:57.737] <TB2> INFO: run duration 7 seconds, buffer almost full (81%), pausing triggers.
[08:14:23.373] <TB2> INFO: Resuming triggers.
[08:14:27.353] <TB2> INFO: run duration 11 seconds, buffer almost full (81%), pausing triggers.
[08:14:53.386] <TB2> INFO: Resuming triggers.
[08:14:57.362] <TB2> INFO: run duration 15 seconds, buffer almost full (81%), pausing triggers.
[08:15:23.714] <TB2> INFO: Resuming triggers.
[08:15:27.690] <TB2> INFO: run duration 19 seconds, buffer almost full (81%), pausing triggers.
[08:15:53.367] <TB2> INFO: Resuming triggers.
[08:15:57.341] <TB2> INFO: run duration 23 seconds, buffer almost full (81%), pausing triggers.
[08:16:24.053] <TB2> INFO: Resuming triggers.
[08:16:28.030] <TB2> INFO: run duration 27 seconds, buffer almost full (81%), pausing triggers.
[08:16:53.673] <TB2> INFO: Resuming triggers.
[08:16:57.646] <TB2> INFO: run duration 31 seconds, buffer almost full (81%), pausing triggers.
[08:17:24.667] <TB2> INFO: Resuming triggers.
[08:17:28.642] <TB2> INFO: run duration 35 seconds, buffer almost full (81%), pausing triggers.
[08:17:56.037] <TB2> INFO: Resuming triggers.
[08:18:00.013] <TB2> INFO: run duration 39 seconds, buffer almost full (81%), pausing triggers.
[08:18:26.305] <TB2> INFO: Resuming triggers.
[08:18:30.275] <TB2> INFO: run duration 43 seconds, buffer almost full (81%), pausing triggers.
[08:18:56.627] <TB2> INFO: Resuming triggers.
[08:19:00.601] <TB2> INFO: run duration 47 seconds, buffer almost full (81%), pausing triggers.
[08:19:27.021] <TB2> INFO: Resuming triggers.
[08:19:30.994] <TB2> INFO: run duration 51 seconds, buffer almost full (81%), pausing triggers.
[08:19:58.111] <TB2> INFO: Resuming triggers.
[08:20:02.080] <TB2> INFO: run duration 55 seconds, buffer almost full (81%), pausing triggers.
[08:20:29.651] <TB2> INFO: Resuming triggers.
[08:20:33.623] <TB2> INFO: run duration 59 seconds, buffer almost full (81%), pausing triggers.
[08:21:02.096] <TB2> INFO: Resuming triggers.
[08:21:06.069] <TB2> INFO: run duration 63 seconds, buffer almost full (81%), pausing triggers.
[08:21:20.178] <TB2> ERROR: <datapipe.cc/CheckEventValidity:L523> Channel 1 Number of ROCs (5) != Token Chain Length (4)

[08:21:20.178] <TB2> ERROR: <datapipe.cc/Read:L170> Dumping the flawed event +- 3 events:

[08:21:20.178] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a1a1 80c0 4381 413 2a4c 4d3 2482 609 2040 603 206d 4301 5c 2860 24c 246c 60d 2269 620 2649 642 2a2f 802 2a40 81c 2665 861 226c 4301 415 2449 490 244c 859 2049 4301 361 2069 343 208d 45a 2449 540 2649 e000 c000

[08:21:20.178] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a19b 8040 4300 111 2861 158 2041 352 204c 4300 503 2a61 504 2240 4380 45c 2460 71d 2a65 760 2a42 4300 800 2865 e000 c000

[08:21:20.178] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a19c 80b0 4300 11 2047 4300 4300 75a 226a 4300 4a0 2265 e000 c000

[08:21:20.178] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a19d 80c0 4300 28d 2080 34b 2060 402 2247 4300 1 224c d4 2a2d 344 2642 4300 852 242d 84c 2244 4300 12 2841 91 2267 e000 c000

[08:21:20.178] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a19e 8000 4300 110 2240 160 2647 2c9 2a4d 652 2648 751 2483 4380 550 2049 654 2249 4300 4302 100 2b4c 9a2 214c c62 2948 9a2 284c ca2 2b64 c2c 23a8 9ae 2c48 4301 11 2a64 249 204c 290 2a4d 508 2229 699 2081 e000 c000

[08:21:20.178] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a19f 8040 4302 20c 2044 49a 2849 552 284c 808 2626 4302 6c9 2426 6c9 264f 4302 714 2649 860 2649 4300 159 2a45 49d 226b e000 c000

[08:21:20.178] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a1a0 80b0 4300 541 2668 4300 4300 93 2069 4301 52 246d 45 2069 402 2069 448 284c 540 2846 649 2845 849 204f 840 2427 e000 c000

[08:21:33.153] <TB2> INFO: Resuming triggers.
[08:21:37.120] <TB2> INFO: run duration 67 seconds, buffer almost full (81%), pausing triggers.
[08:22:03.573] <TB2> INFO: Resuming triggers.
[08:22:07.540] <TB2> INFO: run duration 71 seconds, buffer almost full (81%), pausing triggers.
[08:22:34.551] <TB2> INFO: Resuming triggers.
[08:22:38.518] <TB2> INFO: run duration 75 seconds, buffer almost full (81%), pausing triggers.
[08:23:05.217] <TB2> INFO: Resuming triggers.
[08:23:09.184] <TB2> INFO: run duration 79 seconds, buffer almost full (81%), pausing triggers.
[08:23:35.039] <TB2> INFO: Resuming triggers.
[08:23:39.009] <TB2> INFO: run duration 83 seconds, buffer almost full (81%), pausing triggers.
[08:24:06.639] <TB2> INFO: Resuming triggers.
[08:24:10.607] <TB2> INFO: run duration 87 seconds, buffer almost full (81%), pausing triggers.
[08:24:35.694] <TB2> INFO: Resuming triggers.
[08:24:39.658] <TB2> INFO: run duration 91 seconds, buffer almost full (81%), pausing triggers.
[08:25:05.115] <TB2> INFO: Resuming triggers.
[08:25:09.078] <TB2> INFO: run duration 95 seconds, buffer almost full (81%), pausing triggers.
[08:25:34.245] <TB2> INFO: Resuming triggers.
[08:25:38.208] <TB2> INFO: run duration 99 seconds, buffer almost full (81%), pausing triggers.
[08:26:04.085] <TB2> INFO: Resuming triggers.
[08:26:04.895] <TB2> INFO: data taking finished, elapsed time: 100 seconds.
[08:26:09.860] <TB2> INFO: PixTest:: pg_setup set to default.
[08:26:09.861] <TB2> INFO: PixTestXray::doPhRun() done
[08:26:09.861] <TB2> INFO: PixTestXray::doTest() done
[08:26:10.040] <TB2> INFO: enter test to run
[08:26:10.040] <TB2> INFO: test: no parameter change
[08:26:10.304] <TB2> QUIET: Connection to board 162 closed.
[08:26:10.389] <TB2> INFO: pXar: this is the end, my friend
commander_HRSCurves.log
[08:26:48.305] <TB2> INFO: *** Welcome to pxar ***
[08:26:48.305] <TB2> INFO: *** Today: 2016/10/10
[08:26:48.373] <TB2> INFO: *** Version: f5d3-dirty
[08:26:48.373] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//006_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//006_HRSCurves_100//dacParameters35_C15.dat
[08:26:48.374] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//006_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//006_HRSCurves_100//tbmParameters_C0b.dat
[08:26:48.374] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//006_HRSCurves_100//defaultMaskFile.dat
[08:26:48.374] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//006_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//006_HRSCurves_100//trimParameters35_C15.dat
[08:26:48.445] <TB2> INFO: clk: 4
[08:26:48.445] <TB2> INFO: ctr: 4
[08:26:48.445] <TB2> INFO: sda: 19
[08:26:48.445] <TB2> INFO: tin: 9
[08:26:48.445] <TB2> INFO: level: 15
[08:26:48.445] <TB2> INFO: triggerdelay: 0
[08:26:48.445] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[08:26:48.445] <TB2> INFO: Log level: INFO
[08:26:48.459] <TB2> INFO: Found DTB DTB_WXENWR
[08:26:48.470] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[08:26:48.472] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[08:26:48.473] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[08:26:50.007] <TB2> INFO: DUT info:
[08:26:50.007] <TB2> INFO: The DUT currently contains the following objects:
[08:26:50.007] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[08:26:50.007] <TB2> INFO: TBM Core alpha (0): 7 registers set
[08:26:50.007] <TB2> INFO: TBM Core beta (1): 7 registers set
[08:26:50.007] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[08:26:50.007] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.008] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[08:26:50.408] <TB2> INFO: enter 'restricted' command line mode
[08:26:50.408] <TB2> INFO: enter test to run
[08:26:50.408] <TB2> INFO: test: Highrate no parameter change
[08:26:50.408] <TB2> INFO: running: highrate
[08:26:50.409] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//006_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//006_HRSCurves_100//phCalibrationFitErr35_C15.dat
[08:26:50.560] <TB2> INFO: ----------------------------------------------------------------------
[08:26:50.560] <TB2> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[08:26:50.560] <TB2> INFO: ----------------------------------------------------------------------
[08:26:50.566] <TB2> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 15 .. 75 (20/-1) hits flags = 896 (plus default)
[08:26:50.579] <TB2> INFO: dacScan step from 15 .. 34
[08:26:50.579] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[08:26:50.579] <TB2> INFO: run 1 of 1
[08:26:51.069] <TB2> INFO: Expecting 4160000 events.
[08:27:17.324] <TB2> INFO: 444900 events read in total (25851ms).
[08:27:42.910] <TB2> INFO: 891700 events read in total (51437ms).
[08:28:09.038] <TB2> INFO: 1338250 events read in total (77565ms).
[08:28:35.399] <TB2> INFO: 1784550 events read in total (103926ms).
[08:29:00.936] <TB2> INFO: 2230850 events read in total (129463ms).
[08:29:27.800] <TB2> INFO: 2677400 events read in total (156327ms).
[08:29:54.850] <TB2> INFO: 3123700 events read in total (183377ms).
[08:30:21.601] <TB2> INFO: 3569850 events read in total (210128ms).
[08:30:47.914] <TB2> INFO: 4015750 events read in total (236441ms).
[08:30:57.085] <TB2> INFO: 4160000 events read in total (245612ms).
[08:30:57.438] <TB2> INFO: Test took 246858ms.
[08:31:04.640] <TB2> INFO: dacScan step from 35 .. 54
[08:31:04.640] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[08:31:04.640] <TB2> INFO: run 1 of 1
[08:31:05.122] <TB2> INFO: Expecting 4160000 events.
[08:31:30.547] <TB2> INFO: 380150 events read in total (25007ms).
[08:31:46.736] <TB2> ERROR: <datapipe.cc/CheckEventValidity:L523> Channel 1 Number of ROCs (5) != Token Chain Length (4)

[08:31:46.736] <TB2> ERROR: <datapipe.cc/Read:L170> Dumping the flawed event +- 3 events:

[08:31:46.736] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a1a9 80c0 4300 122 2842 543 284f 600 284a 802 2844 844 2a44 4300 122 2844 481 2649 51a 266b 6d4 2463 803 2044 4300 4301 6c4 220f e002 c000

[08:31:46.736] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a1a3 8040 4300 122 284f 859 2247 4301 614 282f 4300 122 2861 153 2048 449 204f 4300 c4 2a4b 122 284a 459 2a6c 519 2465 e002 c000

[08:31:46.736] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a1a4 80b0 4300 122 2846 618 286d 4300 295 2267 348 222c 448 2a48 4300 10c 2a29 2c8 224f 4d2 2a61 4dd 2661 4300 298 2069 690 2a49 e002 c000

[08:31:46.736] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a1a5 80c0 4300 122 284f 102 2241 4d8 284a 4300 14a 2849 4300 850 2a42 4300 513 204f 858 2647 e002 c000

[08:31:46.736] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a1a6 8000 4300 50 222e 122 2864 85a 202f 4300 4300 4301 ac6 2c96 4f8 262a 4300 122 2840 120 284d 551 224f 855 244a 859 224d e002 c000

[08:31:46.736] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a1a7 8040 4300 94 2060 122 2845 354 204c 4300 122 284c 105 262d 4d0 222f 4300 122 284f 851 222f 4300 811 2a6d e002 c000

[08:31:46.736] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a1a8 80b0 4300 d2 282d 243 2449 4300 6ca 244f 4380 848 2243 4300 141 264f 308 2043 e002 c000

[08:31:55.858] <TB2> INFO: 760750 events read in total (50318ms).
[08:32:20.942] <TB2> INFO: 1140250 events read in total (75402ms).
[08:32:45.789] <TB2> INFO: 1518700 events read in total (100249ms).
[08:33:11.060] <TB2> INFO: 1895700 events read in total (125520ms).
[08:33:35.758] <TB2> INFO: 2270300 events read in total (150218ms).
[08:34:00.861] <TB2> INFO: 2642200 events read in total (175321ms).
[08:34:26.072] <TB2> INFO: 3011000 events read in total (200532ms).
[08:34:50.986] <TB2> INFO: 3376650 events read in total (225446ms).
[08:35:16.114] <TB2> INFO: 3740000 events read in total (250574ms).
[08:35:40.951] <TB2> INFO: 4102800 events read in total (275411ms).
[08:35:45.330] <TB2> INFO: 4160000 events read in total (279790ms).
[08:35:45.623] <TB2> INFO: Test took 280983ms.
[08:35:54.805] <TB2> INFO: dacScan step from 55 .. 74
[08:35:54.805] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[08:35:54.805] <TB2> INFO: run 1 of 1
[08:35:55.284] <TB2> INFO: Expecting 4160000 events.
[08:36:19.378] <TB2> INFO: 331950 events read in total (23692ms).
[08:36:43.875] <TB2> INFO: 664400 events read in total (48189ms).
[08:37:08.441] <TB2> INFO: 996850 events read in total (72755ms).
[08:37:32.241] <TB2> INFO: 1329450 events read in total (96556ms).
[08:37:56.516] <TB2> INFO: 1662050 events read in total (120830ms).
[08:38:20.512] <TB2> INFO: 1994600 events read in total (144826ms).
[08:38:44.471] <TB2> INFO: 2327150 events read in total (168785ms).
[08:39:08.149] <TB2> INFO: 2659850 events read in total (192463ms).
[08:39:32.073] <TB2> INFO: 2992150 events read in total (216387ms).
[08:39:55.228] <TB2> INFO: 3324600 events read in total (239542ms).
[08:40:18.511] <TB2> INFO: 3657200 events read in total (262825ms).
[08:40:41.778] <TB2> INFO: 3989700 events read in total (286092ms).
[08:40:54.741] <TB2> INFO: 4160000 events read in total (299055ms).
[08:40:55.004] <TB2> INFO: Test took 300199ms.
[08:41:03.483] <TB2> INFO: dacScan step from 75 .. 75
[08:41:03.483] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[08:41:03.483] <TB2> INFO: run 1 of 1
[08:41:03.960] <TB2> INFO: Expecting 208000 events.
[08:41:21.162] <TB2> INFO: 208000 events read in total (16800ms).
[08:41:21.171] <TB2> INFO: Test took 17688ms.
[08:41:21.531] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:22.640] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:23.717] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:24.864] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:25.925] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:26.987] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:28.067] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:29.172] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:30.260] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:31.418] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:32.600] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:33.726] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:34.889] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:35.973] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:37.121] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:38.192] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[08:41:39.384] <TB2> INFO: PixTest:: pg_setup set to default.
[08:41:39.386] <TB2> INFO: vcal mean: 38.45 38.65 38.55 42.14 41.04 41.61 41.92 42.27 42.96 42.11 42.94 42.28 41.67 39.31 39.77 39.62
[08:41:39.386] <TB2> INFO: vcal RMS: 1.17 1.23 0.92 1.49 1.18 1.33 1.36 1.43 1.50 1.38 1.45 1.53 1.30 1.16 1.05 1.12
[08:41:39.386] <TB2> INFO: number of X-ray hits detected: 216042 218786 199901 365021 336179 384997 373623 408461 426769 414241 437743 373677 346007 218178 240931 245623
[08:41:39.386] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[08:41:39.386] <TB2> INFO: X-ray hit rate [MHz/cm2]: 63.3 64.1 58.6 107.0 98.5 112.8 109.5 119.7 125.1 121.4 128.3 109.5 101.4 63.9 70.6 72.0
[08:41:39.386] <TB2> INFO: PixTestHighRate::doXNoiseMaps() done
[08:41:39.513] <TB2> INFO: enter test to run
[08:41:39.513] <TB2> INFO: test: no parameter change
[08:41:39.749] <TB2> QUIET: Connection to board 162 closed.
[08:41:39.829] <TB2> INFO: pXar: this is the end, my friend
commander_CalDelScanAndSaveDacs.log
[09:00:45.855] <TB2> INFO: *** Welcome to pxar ***
[09:00:45.855] <TB2> INFO: *** Today: 2016/10/10
[09:00:45.924] <TB2> INFO: *** Version: f5d3-dirty
[09:00:45.924] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[09:00:45.924] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[09:00:45.925] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[09:00:45.925] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[09:00:45.999] <TB2> INFO: clk: 4
[09:00:45.999] <TB2> INFO: ctr: 4
[09:00:45.999] <TB2> INFO: sda: 19
[09:00:45.999] <TB2> INFO: tin: 9
[09:00:45.999] <TB2> INFO: level: 15
[09:00:45.999] <TB2> INFO: triggerdelay: 0
[09:00:45.999] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[09:00:45.999] <TB2> INFO: Log level: INFO
[09:00:46.013] <TB2> INFO: Found DTB DTB_WXENWR
[09:00:46.024] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[09:00:46.026] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[09:00:46.028] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[09:00:47.561] <TB2> INFO: DUT info:
[09:00:47.561] <TB2> INFO: The DUT currently contains the following objects:
[09:00:47.561] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[09:00:47.561] <TB2> INFO: TBM Core alpha (0): 7 registers set
[09:00:47.561] <TB2> INFO: TBM Core beta (1): 7 registers set
[09:00:47.561] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:00:47.561] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.561] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:00:47.962] <TB2> INFO: enter 'restricted' command line mode
[09:00:47.962] <TB2> INFO: enter test to run
[09:00:47.962] <TB2> INFO: test: HighRate no parameter change
[09:00:47.962] <TB2> INFO: running: highrate
[09:00:47.963] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[09:00:48.134] <TB2> INFO: ----------------------------------------------------------------------
[09:00:48.134] <TB2> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[09:00:48.134] <TB2> INFO: ----------------------------------------------------------------------
[09:00:48.229] <TB2> INFO: Expecting 768 events.
[09:00:49.216] <TB2> INFO: 768 events read in total (429ms).
[09:00:49.280] <TB2> INFO: Test took 1140ms.
[09:00:49.773] <TB2> INFO: Expecting 41600 events.
[09:00:52.632] <TB2> INFO: 41600 events read in total (2457ms).
[09:00:52.634] <TB2> INFO: Test took 3351ms.
[09:00:53.262] <TB2> INFO: Expecting 41600 events.
[09:00:56.225] <TB2> INFO: 41600 events read in total (2561ms).
[09:00:56.226] <TB2> INFO: Test took 3467ms.
[09:00:56.840] <TB2> INFO: Expecting 41600 events.
[09:00:59.949] <TB2> INFO: 41600 events read in total (2708ms).
[09:00:59.951] <TB2> INFO: Test took 3614ms.
[09:01:00.560] <TB2> INFO: Expecting 41600 events.
[09:01:03.713] <TB2> INFO: 41600 events read in total (2752ms).
[09:01:03.715] <TB2> INFO: Test took 3649ms.
[09:01:04.334] <TB2> INFO: Expecting 41600 events.
[09:01:07.359] <TB2> INFO: 41600 events read in total (2623ms).
[09:01:07.361] <TB2> INFO: Test took 3520ms.
[09:01:07.956] <TB2> INFO: Expecting 41600 events.
[09:01:10.986] <TB2> INFO: 41600 events read in total (2628ms).
[09:01:10.988] <TB2> INFO: Test took 3515ms.
[09:01:11.588] <TB2> INFO: Expecting 41600 events.
[09:01:14.617] <TB2> INFO: 41600 events read in total (2627ms).
[09:01:14.619] <TB2> INFO: Test took 3517ms.
[09:01:15.220] <TB2> INFO: Expecting 41600 events.
[09:01:18.278] <TB2> INFO: 41600 events read in total (2656ms).
[09:01:18.280] <TB2> INFO: Test took 3546ms.
[09:01:18.883] <TB2> INFO: Expecting 41600 events.
[09:01:21.873] <TB2> INFO: 41600 events read in total (2588ms).
[09:01:21.874] <TB2> INFO: Test took 3481ms.
[09:01:22.464] <TB2> INFO: Expecting 41600 events.
[09:01:25.406] <TB2> INFO: 41600 events read in total (2541ms).
[09:01:25.407] <TB2> INFO: Test took 3423ms.
[09:01:26.011] <TB2> INFO: Expecting 41600 events.
[09:01:29.015] <TB2> INFO: 41600 events read in total (2602ms).
[09:01:29.016] <TB2> INFO: Test took 3499ms.
[09:01:29.628] <TB2> INFO: Expecting 41600 events.
[09:01:32.562] <TB2> INFO: 41600 events read in total (2532ms).
[09:01:32.564] <TB2> INFO: Test took 3428ms.
[09:01:33.181] <TB2> INFO: Expecting 41600 events.
[09:01:36.181] <TB2> INFO: 41600 events read in total (2598ms).
[09:01:36.182] <TB2> INFO: Test took 3501ms.
[09:01:36.808] <TB2> INFO: Expecting 41600 events.
[09:01:39.746] <TB2> INFO: 41600 events read in total (2536ms).
[09:01:39.747] <TB2> INFO: Test took 3443ms.
[09:01:40.336] <TB2> INFO: Expecting 41600 events.
[09:01:43.276] <TB2> INFO: 41600 events read in total (2539ms).
[09:01:43.278] <TB2> INFO: Test took 3422ms.
[09:01:43.866] <TB2> INFO: Expecting 41600 events.
[09:01:46.791] <TB2> INFO: 41600 events read in total (2523ms).
[09:01:46.792] <TB2> INFO: Test took 3405ms.
[09:01:47.380] <TB2> INFO: Expecting 41600 events.
[09:01:50.282] <TB2> INFO: 41600 events read in total (2501ms).
[09:01:50.284] <TB2> INFO: Test took 3383ms.
[09:01:50.871] <TB2> INFO: Expecting 41600 events.
[09:01:53.833] <TB2> INFO: 41600 events read in total (2561ms).
[09:01:53.835] <TB2> INFO: Test took 3443ms.
[09:01:54.463] <TB2> INFO: Expecting 41600 events.
[09:01:57.574] <TB2> INFO: 41600 events read in total (2709ms).
[09:01:57.576] <TB2> INFO: Test took 3621ms.
[09:01:58.164] <TB2> INFO: Expecting 41600 events.
[09:02:01.185] <TB2> INFO: 41600 events read in total (2619ms).
[09:02:01.186] <TB2> INFO: Test took 3501ms.
[09:02:01.558] <TB2> INFO: enter test to run
[09:02:01.558] <TB2> INFO: test: Pretest no parameter change
[09:02:01.558] <TB2> INFO: running: pretest
[09:02:01.558] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[09:02:01.558] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[09:02:01.558] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[09:02:01.558] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[09:02:01.558] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[09:02:01.558] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[09:02:01.559] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[09:02:01.559] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[09:02:01.559] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[09:02:01.559] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[09:02:01.559] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[09:02:01.559] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[09:02:01.559] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[09:02:01.559] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[09:02:01.559] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[09:02:01.559] <TB2> INFO: write dac parameters into /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[09:02:01.560] <TB2> INFO: enter test to run
[09:02:01.560] <TB2> INFO: test: no parameter change
[09:02:01.817] <TB2> QUIET: Connection to board 162 closed.
[09:02:01.896] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[09:02:47.535] <TB2> INFO: *** Welcome to pxar ***
[09:02:47.535] <TB2> INFO: *** Today: 2016/10/10
[09:02:47.604] <TB2> INFO: *** Version: f5d3-dirty
[09:02:47.604] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//012_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//012_HREfficiency_50//dacParameters35_C15.dat
[09:02:47.605] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//012_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//012_HREfficiency_50//tbmParameters_C0b.dat
[09:02:47.605] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//012_HREfficiency_50//defaultMaskFile.dat
[09:02:47.605] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//012_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//012_HREfficiency_50//trimParameters35_C15.dat
[09:02:47.677] <TB2> INFO: clk: 4
[09:02:47.677] <TB2> INFO: ctr: 4
[09:02:47.677] <TB2> INFO: sda: 19
[09:02:47.677] <TB2> INFO: tin: 9
[09:02:47.677] <TB2> INFO: level: 15
[09:02:47.677] <TB2> INFO: triggerdelay: 0
[09:02:47.677] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[09:02:47.677] <TB2> INFO: Log level: INFO
[09:02:47.690] <TB2> INFO: Found DTB DTB_WXENWR
[09:02:47.701] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[09:02:47.703] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[09:02:47.704] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[09:02:49.243] <TB2> INFO: DUT info:
[09:02:49.243] <TB2> INFO: The DUT currently contains the following objects:
[09:02:49.243] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[09:02:49.243] <TB2> INFO: TBM Core alpha (0): 7 registers set
[09:02:49.243] <TB2> INFO: TBM Core beta (1): 7 registers set
[09:02:49.243] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:02:49.243] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.243] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:02:49.644] <TB2> INFO: enter 'restricted' command line mode
[09:02:49.644] <TB2> INFO: enter test to run
[09:02:49.644] <TB2> INFO: test: PixelAlive no parameter change
[09:02:49.644] <TB2> INFO: running: pixelalive
[09:02:49.648] <TB2> INFO: ######################################################################
[09:02:49.648] <TB2> INFO: PixTestAlive::doTest()
[09:02:49.648] <TB2> INFO: ######################################################################
[09:02:49.649] <TB2> INFO: ----------------------------------------------------------------------
[09:02:49.649] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:02:49.649] <TB2> INFO: ----------------------------------------------------------------------
[09:02:49.913] <TB2> INFO: Expecting 208000 events.
[09:02:59.307] <TB2> INFO: 208000 events read in total (8836ms).
[09:02:59.308] <TB2> INFO: Test took 9658ms.
[09:02:59.535] <TB2> INFO: PixTestAlive::aliveTest() done
[09:02:59.535] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:02:59.537] <TB2> INFO: ----------------------------------------------------------------------
[09:02:59.537] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:02:59.537] <TB2> INFO: ----------------------------------------------------------------------
[09:02:59.840] <TB2> INFO: Expecting 208000 events.
[09:03:06.418] <TB2> INFO: 208000 events read in total (6022ms).
[09:03:06.420] <TB2> INFO: Test took 6882ms.
[09:03:06.420] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[09:03:06.626] <TB2> INFO: PixTestAlive::maskTest() done
[09:03:06.626] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:03:06.627] <TB2> INFO: ----------------------------------------------------------------------
[09:03:06.627] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:03:06.627] <TB2> INFO: ----------------------------------------------------------------------
[09:03:06.895] <TB2> INFO: Expecting 208000 events.
[09:03:16.134] <TB2> INFO: 208000 events read in total (8683ms).
[09:03:16.135] <TB2> INFO: Test took 9507ms.
[09:03:16.330] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[09:03:16.330] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:03:16.330] <TB2> INFO: PixTestAlive::doTest() done, duration: 26 seconds
[09:03:16.359] <TB2> INFO: enter test to run
[09:03:16.359] <TB2> INFO: test: delay setting parameters: ->2<-
[09:03:16.359] <TB2> INFO: delay test by 2 seconds...
[09:03:18.359] <TB2> INFO: enter test to run
[09:03:18.360] <TB2> INFO: test: HighRate no parameter change
[09:03:18.360] <TB2> INFO: running: highrate
[09:03:18.360] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//012_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//012_HREfficiency_50//phCalibrationFitErr35_C15.dat
[09:03:18.508] <TB2> INFO: ----------------------------------------------------------------------
[09:03:18.508] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[09:03:18.508] <TB2> INFO: ----------------------------------------------------------------------
[09:03:18.989] <TB2> INFO: Expecting 208000 events.
[09:03:31.437] <TB2> INFO: 208000 events read in total (12047ms).
[09:03:31.443] <TB2> INFO: Test took 12932ms.
[09:03:31.989] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:03:31.989] <TB2> INFO: number of red-efficiency pixels: 128 143 169 308 248 336 338 409 398 387 460 288 242 165 151 150
[09:03:31.989] <TB2> INFO: number of X-ray hits detected: 106761 107762 97362 182207 166968 193643 186156 203817 211676 204933 220901 185550 172076 106200 118170 122509
[09:03:31.989] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[09:03:31.989] <TB2> INFO: number of Vcal hits detected: 207869 207848 207826 207676 207741 207645 207629 207573 207576 207587 207509 207697 207748 207828 207843 207847
[09:03:31.989] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.9 99.9 99.8 99.8 99.8 99.8 99.8 99.8 99.9 99.9 99.9 99.9 99.9
[09:03:31.989] <TB2> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.8 99.9 99.8 99.8 99.8 99.8 99.8 99.8 99.9 99.9 99.9 99.9 99.9
[09:03:31.989] <TB2> INFO: X-ray hit rate [MHz/cm2]: 31.3 31.6 28.5 53.4 48.9 56.8 54.6 59.7 62.0 60.1 64.7 54.4 50.4 31.1 34.6 35.9
[09:03:31.989] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[09:03:32.015] <TB2> INFO: PixTest:: pg_setup set to default.
[09:03:32.024] <TB2> INFO: enter test to run
[09:03:32.024] <TB2> INFO: test: no parameter change
[09:03:32.353] <TB2> QUIET: Connection to board 162 closed.
[09:03:32.433] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[09:04:16.852] <TB2> INFO: *** Welcome to pxar ***
[09:04:16.852] <TB2> INFO: *** Today: 2016/10/10
[09:04:16.923] <TB2> INFO: *** Version: f5d3-dirty
[09:04:16.923] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//013_HREfficiency_75//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//013_HREfficiency_75//dacParameters35_C15.dat
[09:04:16.924] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//013_HREfficiency_75//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//013_HREfficiency_75//tbmParameters_C0b.dat
[09:04:16.924] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//013_HREfficiency_75//defaultMaskFile.dat
[09:04:16.924] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//013_HREfficiency_75//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//013_HREfficiency_75//trimParameters35_C15.dat
[09:04:17.020] <TB2> INFO: clk: 4
[09:04:17.020] <TB2> INFO: ctr: 4
[09:04:17.020] <TB2> INFO: sda: 19
[09:04:17.020] <TB2> INFO: tin: 9
[09:04:17.020] <TB2> INFO: level: 15
[09:04:17.020] <TB2> INFO: triggerdelay: 0
[09:04:17.021] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[09:04:17.021] <TB2> INFO: Log level: INFO
[09:04:17.035] <TB2> INFO: Found DTB DTB_WXENWR
[09:04:17.046] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[09:04:17.048] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[09:04:17.050] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[09:04:18.582] <TB2> INFO: DUT info:
[09:04:18.582] <TB2> INFO: The DUT currently contains the following objects:
[09:04:18.582] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[09:04:18.582] <TB2> INFO: TBM Core alpha (0): 7 registers set
[09:04:18.582] <TB2> INFO: TBM Core beta (1): 7 registers set
[09:04:18.582] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:04:18.582] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.582] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:04:18.983] <TB2> INFO: enter 'restricted' command line mode
[09:04:18.983] <TB2> INFO: enter test to run
[09:04:18.983] <TB2> INFO: test: PixelAlive no parameter change
[09:04:18.983] <TB2> INFO: running: pixelalive
[09:04:18.987] <TB2> INFO: ######################################################################
[09:04:18.987] <TB2> INFO: PixTestAlive::doTest()
[09:04:18.987] <TB2> INFO: ######################################################################
[09:04:18.988] <TB2> INFO: ----------------------------------------------------------------------
[09:04:18.988] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:04:18.988] <TB2> INFO: ----------------------------------------------------------------------
[09:04:19.249] <TB2> INFO: Expecting 208000 events.
[09:04:28.781] <TB2> INFO: 208000 events read in total (8974ms).
[09:04:28.782] <TB2> INFO: Test took 9793ms.
[09:04:28.999] <TB2> INFO: PixTestAlive::aliveTest() done
[09:04:28.999] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:04:29.000] <TB2> INFO: ----------------------------------------------------------------------
[09:04:29.000] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:04:29.000] <TB2> INFO: ----------------------------------------------------------------------
[09:04:29.320] <TB2> INFO: Expecting 208000 events.
[09:04:35.997] <TB2> INFO: 208000 events read in total (6121ms).
[09:04:35.999] <TB2> INFO: Test took 6998ms.
[09:04:35.999] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[09:04:36.203] <TB2> INFO: PixTestAlive::maskTest() done
[09:04:36.203] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:04:36.204] <TB2> INFO: ----------------------------------------------------------------------
[09:04:36.204] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:04:36.205] <TB2> INFO: ----------------------------------------------------------------------
[09:04:36.467] <TB2> INFO: Expecting 208000 events.
[09:04:45.788] <TB2> INFO: 208000 events read in total (8765ms).
[09:04:45.788] <TB2> INFO: Test took 9582ms.
[09:04:45.986] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[09:04:45.986] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:04:45.986] <TB2> INFO: PixTestAlive::doTest() done, duration: 27 seconds
[09:04:46.016] <TB2> INFO: enter test to run
[09:04:46.016] <TB2> INFO: test: delay setting parameters: ->2<-
[09:04:46.016] <TB2> INFO: delay test by 2 seconds...
[09:04:48.016] <TB2> INFO: enter test to run
[09:04:48.016] <TB2> INFO: test: HighRate no parameter change
[09:04:48.016] <TB2> INFO: running: highrate
[09:04:48.016] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//013_HREfficiency_75//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//013_HREfficiency_75//phCalibrationFitErr35_C15.dat
[09:04:48.154] <TB2> INFO: ----------------------------------------------------------------------
[09:04:48.154] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[09:04:48.154] <TB2> INFO: ----------------------------------------------------------------------
[09:04:48.638] <TB2> INFO: Expecting 208000 events.
[09:05:01.672] <TB2> INFO: 208000 events read in total (12632ms).
[09:05:01.681] <TB2> INFO: Test took 13524ms.
[09:05:02.411] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:05:02.411] <TB2> INFO: number of red-efficiency pixels: 279 253 341 585 522 662 666 879 756 749 909 556 531 376 265 308
[09:05:02.411] <TB2> INFO: number of X-ray hits detected: 157072 158435 143181 266764 244802 280706 272449 297955 310402 300486 320388 271522 252222 158277 174753 178508
[09:05:02.411] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[09:05:02.411] <TB2> INFO: number of Vcal hits detected: 207702 207739 207600 207340 207413 207250 207217 206987 207123 207115 206902 207357 207431 207580 207721 207673
[09:05:02.411] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.8 99.7 99.8 99.7 99.7 99.5 99.6 99.6 99.5 99.7 99.8 99.8 99.9 99.9
[09:05:02.411] <TB2> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.8 99.7 99.7 99.6 99.6 99.5 99.6 99.6 99.5 99.7 99.7 99.8 99.9 99.8
[09:05:02.411] <TB2> INFO: X-ray hit rate [MHz/cm2]: 46.0 46.4 42.0 78.2 71.8 82.3 79.9 87.3 91.0 88.1 93.9 79.6 73.9 46.4 51.2 52.3
[09:05:02.411] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[09:05:02.438] <TB2> INFO: PixTest:: pg_setup set to default.
[09:05:02.447] <TB2> INFO: enter test to run
[09:05:02.449] <TB2> INFO: test: no parameter change
[09:05:02.732] <TB2> QUIET: Connection to board 162 closed.
[09:05:02.812] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[09:05:51.193] <TB2> INFO: *** Welcome to pxar ***
[09:05:51.193] <TB2> INFO: *** Today: 2016/10/10
[09:05:51.259] <TB2> INFO: *** Version: f5d3-dirty
[09:05:51.259] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//014_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//014_HREfficiency_100//dacParameters35_C15.dat
[09:05:51.260] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//014_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//014_HREfficiency_100//tbmParameters_C0b.dat
[09:05:51.260] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//014_HREfficiency_100//defaultMaskFile.dat
[09:05:51.260] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//014_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//014_HREfficiency_100//trimParameters35_C15.dat
[09:05:51.336] <TB2> INFO: clk: 4
[09:05:51.336] <TB2> INFO: ctr: 4
[09:05:51.336] <TB2> INFO: sda: 19
[09:05:51.336] <TB2> INFO: tin: 9
[09:05:51.336] <TB2> INFO: level: 15
[09:05:51.336] <TB2> INFO: triggerdelay: 0
[09:05:51.336] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[09:05:51.336] <TB2> INFO: Log level: INFO
[09:05:51.350] <TB2> INFO: Found DTB DTB_WXENWR
[09:05:51.361] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[09:05:51.363] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[09:05:51.364] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[09:05:52.899] <TB2> INFO: DUT info:
[09:05:52.899] <TB2> INFO: The DUT currently contains the following objects:
[09:05:52.899] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[09:05:52.899] <TB2> INFO: TBM Core alpha (0): 7 registers set
[09:05:52.899] <TB2> INFO: TBM Core beta (1): 7 registers set
[09:05:52.899] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:05:52.899] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.899] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.899] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.899] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.899] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.899] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.899] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.899] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.899] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.899] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.899] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.899] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.899] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.899] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.899] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:52.900] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:05:53.300] <TB2> INFO: enter 'restricted' command line mode
[09:05:53.300] <TB2> INFO: enter test to run
[09:05:53.300] <TB2> INFO: test: PixelAlive no parameter change
[09:05:53.300] <TB2> INFO: running: pixelalive
[09:05:53.306] <TB2> INFO: ######################################################################
[09:05:53.306] <TB2> INFO: PixTestAlive::doTest()
[09:05:53.306] <TB2> INFO: ######################################################################
[09:05:53.307] <TB2> INFO: ----------------------------------------------------------------------
[09:05:53.307] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:05:53.307] <TB2> INFO: ----------------------------------------------------------------------
[09:05:53.574] <TB2> INFO: Expecting 208000 events.
[09:06:02.568] <TB2> INFO: 208000 events read in total (8436ms).
[09:06:02.570] <TB2> INFO: Test took 9261ms.
[09:06:02.795] <TB2> INFO: PixTestAlive::aliveTest() done
[09:06:02.796] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:06:02.797] <TB2> INFO: ----------------------------------------------------------------------
[09:06:02.797] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:06:02.797] <TB2> INFO: ----------------------------------------------------------------------
[09:06:03.089] <TB2> INFO: Expecting 208000 events.
[09:06:09.757] <TB2> INFO: 208000 events read in total (6112ms).
[09:06:09.760] <TB2> INFO: Test took 6961ms.
[09:06:09.760] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[09:06:09.953] <TB2> INFO: PixTestAlive::maskTest() done
[09:06:09.953] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:06:09.955] <TB2> INFO: ----------------------------------------------------------------------
[09:06:09.955] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:06:09.955] <TB2> INFO: ----------------------------------------------------------------------
[09:06:10.229] <TB2> INFO: Expecting 208000 events.
[09:06:19.384] <TB2> INFO: 208000 events read in total (8599ms).
[09:06:19.384] <TB2> INFO: Test took 9428ms.
[09:06:19.585] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[09:06:19.585] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:06:19.585] <TB2> INFO: PixTestAlive::doTest() done, duration: 26 seconds
[09:06:19.633] <TB2> INFO: enter test to run
[09:06:19.633] <TB2> INFO: test: delay setting parameters: ->2<-
[09:06:19.633] <TB2> INFO: delay test by 2 seconds...
[09:06:21.633] <TB2> INFO: enter test to run
[09:06:21.633] <TB2> INFO: test: HighRate no parameter change
[09:06:21.633] <TB2> INFO: running: highrate
[09:06:21.634] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//014_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//014_HREfficiency_100//phCalibrationFitErr35_C15.dat
[09:06:21.768] <TB2> INFO: ----------------------------------------------------------------------
[09:06:21.768] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[09:06:21.768] <TB2> INFO: ----------------------------------------------------------------------
[09:06:22.252] <TB2> INFO: Expecting 208000 events.
[09:06:37.179] <TB2> INFO: 208000 events read in total (14526ms).
[09:06:37.189] <TB2> INFO: Test took 15418ms.
[09:06:38.105] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:06:38.105] <TB2> INFO: number of red-efficiency pixels: 508 527 578 1145 944 1184 1245 1646 1499 1431 1579 1170 1001 640 449 492
[09:06:38.105] <TB2> INFO: number of X-ray hits detected: 216177 220687 199353 365230 335376 386181 373503 409380 426838 412157 437294 373832 345566 218071 239691 246454
[09:06:38.105] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[09:06:38.105] <TB2> INFO: number of Vcal hits detected: 207445 207423 207217 206531 206795 206386 206316 205772 205994 206043 205645 206406 206797 207138 207500 207457
[09:06:38.105] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.8 99.7 99.7 99.4 99.5 99.3 99.3 99.0 99.1 99.2 99.0 99.4 99.5 99.7 99.8 99.8
[09:06:38.105] <TB2> INFO: Vcal hit overall efficiency (%): 99.7 99.7 99.6 99.3 99.4 99.2 99.2 98.9 99.0 99.1 98.9 99.2 99.4 99.6 99.8 99.7
[09:06:38.105] <TB2> INFO: X-ray hit rate [MHz/cm2]: 63.4 64.7 58.4 107.1 98.3 113.2 109.5 120.0 125.1 120.8 128.2 109.6 101.3 63.9 70.3 72.2
[09:06:38.105] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[09:06:38.131] <TB2> INFO: PixTest:: pg_setup set to default.
[09:06:38.144] <TB2> INFO: enter test to run
[09:06:38.144] <TB2> INFO: test: no parameter change
[09:06:38.466] <TB2> QUIET: Connection to board 162 closed.
[09:06:38.546] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[09:07:26.650] <TB2> INFO: *** Welcome to pxar ***
[09:07:26.650] <TB2> INFO: *** Today: 2016/10/10
[09:07:26.720] <TB2> INFO: *** Version: f5d3-dirty
[09:07:26.720] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//015_HREfficiency_125//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//015_HREfficiency_125//dacParameters35_C15.dat
[09:07:26.720] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//015_HREfficiency_125//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//015_HREfficiency_125//tbmParameters_C0b.dat
[09:07:26.720] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//015_HREfficiency_125//defaultMaskFile.dat
[09:07:26.720] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//015_HREfficiency_125//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//015_HREfficiency_125//trimParameters35_C15.dat
[09:07:26.796] <TB2> INFO: clk: 4
[09:07:26.796] <TB2> INFO: ctr: 4
[09:07:26.796] <TB2> INFO: sda: 19
[09:07:26.796] <TB2> INFO: tin: 9
[09:07:26.796] <TB2> INFO: level: 15
[09:07:26.796] <TB2> INFO: triggerdelay: 0
[09:07:26.796] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[09:07:26.796] <TB2> INFO: Log level: INFO
[09:07:26.809] <TB2> INFO: Found DTB DTB_WXENWR
[09:07:26.820] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[09:07:26.822] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[09:07:26.823] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[09:07:28.357] <TB2> INFO: DUT info:
[09:07:28.357] <TB2> INFO: The DUT currently contains the following objects:
[09:07:28.357] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[09:07:28.357] <TB2> INFO: TBM Core alpha (0): 7 registers set
[09:07:28.357] <TB2> INFO: TBM Core beta (1): 7 registers set
[09:07:28.357] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:07:28.357] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.357] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:07:28.758] <TB2> INFO: enter 'restricted' command line mode
[09:07:28.758] <TB2> INFO: enter test to run
[09:07:28.758] <TB2> INFO: test: PixelAlive no parameter change
[09:07:28.758] <TB2> INFO: running: pixelalive
[09:07:28.761] <TB2> INFO: ######################################################################
[09:07:28.761] <TB2> INFO: PixTestAlive::doTest()
[09:07:28.761] <TB2> INFO: ######################################################################
[09:07:28.762] <TB2> INFO: ----------------------------------------------------------------------
[09:07:28.762] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:07:28.762] <TB2> INFO: ----------------------------------------------------------------------
[09:07:29.033] <TB2> INFO: Expecting 208000 events.
[09:07:38.120] <TB2> INFO: 208000 events read in total (8530ms).
[09:07:38.122] <TB2> INFO: Test took 9358ms.
[09:07:38.349] <TB2> INFO: PixTestAlive::aliveTest() done
[09:07:38.349] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:07:38.350] <TB2> INFO: ----------------------------------------------------------------------
[09:07:38.350] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:07:38.350] <TB2> INFO: ----------------------------------------------------------------------
[09:07:38.622] <TB2> INFO: Expecting 208000 events.
[09:07:45.229] <TB2> INFO: 208000 events read in total (6051ms).
[09:07:45.231] <TB2> INFO: Test took 6879ms.
[09:07:45.231] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[09:07:45.427] <TB2> INFO: PixTestAlive::maskTest() done
[09:07:45.427] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:07:45.428] <TB2> INFO: ----------------------------------------------------------------------
[09:07:45.428] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:07:45.428] <TB2> INFO: ----------------------------------------------------------------------
[09:07:45.713] <TB2> INFO: Expecting 208000 events.
[09:07:54.765] <TB2> INFO: 208000 events read in total (8496ms).
[09:07:54.766] <TB2> INFO: Test took 9337ms.
[09:07:54.961] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[09:07:54.961] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:07:54.962] <TB2> INFO: PixTestAlive::doTest() done, duration: 26 seconds
[09:07:55.002] <TB2> INFO: enter test to run
[09:07:55.002] <TB2> INFO: test: delay setting parameters: ->2<-
[09:07:55.002] <TB2> INFO: delay test by 2 seconds...
[09:07:57.002] <TB2> INFO: enter test to run
[09:07:57.002] <TB2> INFO: test: HighRate no parameter change
[09:07:57.002] <TB2> INFO: running: highrate
[09:07:57.002] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//015_HREfficiency_125//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//015_HREfficiency_125//phCalibrationFitErr35_C15.dat
[09:07:57.147] <TB2> INFO: ----------------------------------------------------------------------
[09:07:57.147] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[09:07:57.147] <TB2> INFO: ----------------------------------------------------------------------
[09:07:57.639] <TB2> INFO: Expecting 208000 events.
[09:08:14.560] <TB2> INFO: 208000 events read in total (16519ms).
[09:08:14.571] <TB2> INFO: Test took 17421ms.
[09:08:15.644] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:08:15.644] <TB2> INFO: number of red-efficiency pixels: 753 764 804 1619 1349 1791 1781 2333 2196 2046 2288 1646 1377 878 686 758
[09:08:15.644] <TB2> INFO: number of X-ray hits detected: 264812 268114 244092 443415 410171 468809 454256 496019 519307 501951 531029 452821 421245 267006 292895 298852
[09:08:15.644] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[09:08:15.644] <TB2> INFO: number of Vcal hits detected: 207132 207130 206701 205606 206009 205209 204974 204110 204490 204639 203818 205421 206071 206570 207227 207120
[09:08:15.644] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.6 99.6 99.5 99.0 99.2 98.8 98.8 98.3 98.5 98.6 98.2 98.9 99.2 99.4 99.6 99.6
[09:08:15.644] <TB2> INFO: Vcal hit overall efficiency (%): 99.6 99.6 99.4 98.8 99.0 98.7 98.5 98.1 98.3 98.4 98.0 98.8 99.1 99.3 99.6 99.6
[09:08:15.644] <TB2> INFO: X-ray hit rate [MHz/cm2]: 77.6 78.6 71.5 130.0 120.2 137.4 133.1 145.4 152.2 147.1 155.6 132.7 123.5 78.3 85.8 87.6
[09:08:15.644] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[09:08:15.665] <TB2> INFO: PixTest:: pg_setup set to default.
[09:08:15.676] <TB2> INFO: enter test to run
[09:08:15.676] <TB2> INFO: test: no parameter change
[09:08:15.991] <TB2> QUIET: Connection to board 162 closed.
[09:08:16.071] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[09:09:02.739] <TB2> INFO: *** Welcome to pxar ***
[09:09:02.739] <TB2> INFO: *** Today: 2016/10/10
[09:09:02.812] <TB2> INFO: *** Version: f5d3-dirty
[09:09:02.812] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//016_HREfficiency_150//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//016_HREfficiency_150//dacParameters35_C15.dat
[09:09:02.814] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//016_HREfficiency_150//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//016_HREfficiency_150//tbmParameters_C0b.dat
[09:09:02.814] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//016_HREfficiency_150//defaultMaskFile.dat
[09:09:02.814] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//016_HREfficiency_150//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//016_HREfficiency_150//trimParameters35_C15.dat
[09:09:02.891] <TB2> INFO: clk: 4
[09:09:02.891] <TB2> INFO: ctr: 4
[09:09:02.891] <TB2> INFO: sda: 19
[09:09:02.891] <TB2> INFO: tin: 9
[09:09:02.891] <TB2> INFO: level: 15
[09:09:02.891] <TB2> INFO: triggerdelay: 0
[09:09:02.891] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[09:09:02.891] <TB2> INFO: Log level: INFO
[09:09:02.904] <TB2> INFO: Found DTB DTB_WXENWR
[09:09:02.915] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[09:09:02.917] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[09:09:02.919] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[09:09:04.463] <TB2> INFO: DUT info:
[09:09:04.463] <TB2> INFO: The DUT currently contains the following objects:
[09:09:04.463] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[09:09:04.463] <TB2> INFO: TBM Core alpha (0): 7 registers set
[09:09:04.463] <TB2> INFO: TBM Core beta (1): 7 registers set
[09:09:04.463] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:09:04.463] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.463] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:09:04.864] <TB2> INFO: enter 'restricted' command line mode
[09:09:04.864] <TB2> INFO: enter test to run
[09:09:04.864] <TB2> INFO: test: PixelAlive no parameter change
[09:09:04.864] <TB2> INFO: running: pixelalive
[09:09:04.867] <TB2> INFO: ######################################################################
[09:09:04.867] <TB2> INFO: PixTestAlive::doTest()
[09:09:04.867] <TB2> INFO: ######################################################################
[09:09:04.868] <TB2> INFO: ----------------------------------------------------------------------
[09:09:04.868] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:09:04.868] <TB2> INFO: ----------------------------------------------------------------------
[09:09:05.129] <TB2> INFO: Expecting 208000 events.
[09:09:14.413] <TB2> INFO: 208000 events read in total (8726ms).
[09:09:14.414] <TB2> INFO: Test took 9545ms.
[09:09:14.636] <TB2> INFO: PixTestAlive::aliveTest() done
[09:09:14.636] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:09:14.638] <TB2> INFO: ----------------------------------------------------------------------
[09:09:14.638] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:09:14.638] <TB2> INFO: ----------------------------------------------------------------------
[09:09:14.903] <TB2> INFO: Expecting 208000 events.
[09:09:21.332] <TB2> INFO: 208000 events read in total (5873ms).
[09:09:21.333] <TB2> INFO: Test took 6694ms.
[09:09:21.334] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[09:09:21.534] <TB2> INFO: PixTestAlive::maskTest() done
[09:09:21.534] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:09:21.535] <TB2> INFO: ----------------------------------------------------------------------
[09:09:21.535] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:09:21.535] <TB2> INFO: ----------------------------------------------------------------------
[09:09:21.800] <TB2> INFO: Expecting 208000 events.
[09:09:31.373] <TB2> INFO: 208000 events read in total (9017ms).
[09:09:31.373] <TB2> INFO: Test took 9836ms.
[09:09:31.570] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[09:09:31.570] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:09:31.570] <TB2> INFO: PixTestAlive::doTest() done, duration: 26 seconds
[09:09:31.599] <TB2> INFO: enter test to run
[09:09:31.599] <TB2> INFO: test: delay setting parameters: ->2<-
[09:09:31.599] <TB2> INFO: delay test by 2 seconds...
[09:09:33.599] <TB2> INFO: enter test to run
[09:09:33.599] <TB2> INFO: test: HighRate no parameter change
[09:09:33.599] <TB2> INFO: running: highrate
[09:09:33.599] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//016_HREfficiency_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//016_HREfficiency_150//phCalibrationFitErr35_C15.dat
[09:09:33.737] <TB2> INFO: ----------------------------------------------------------------------
[09:09:33.737] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[09:09:33.737] <TB2> INFO: ----------------------------------------------------------------------
[09:09:34.219] <TB2> INFO: Expecting 208000 events.
[09:09:53.847] <TB2> INFO: 208000 events read in total (19226ms).
[09:09:53.858] <TB2> INFO: Test took 20118ms.
[09:09:55.346] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:09:55.346] <TB2> INFO: number of red-efficiency pixels: 1038 1122 1066 2229 1907 2353 2366 3047 2950 2768 2902 2295 2034 1173 969 1123
[09:09:55.346] <TB2> INFO: number of X-ray hits detected: 315407 320871 292442 526550 488708 557493 542711 593009 618317 596103 633267 541626 500959 319742 349916 356896
[09:09:55.346] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[09:09:55.346] <TB2> INFO: number of Vcal hits detected: 206726 206619 205908 203900 204638 203494 203176 201553 201961 202065 201250 203460 204698 205662 206817 206561
[09:09:55.346] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.5 99.4 99.2 98.3 98.6 98.1 98.0 97.2 97.4 97.5 97.1 98.1 98.6 99.1 99.5 99.4
[09:09:55.346] <TB2> INFO: Vcal hit overall efficiency (%): 99.4 99.3 99.0 98.0 98.4 97.8 97.7 96.9 97.1 97.1 96.8 97.8 98.4 98.9 99.4 99.3
[09:09:55.346] <TB2> INFO: X-ray hit rate [MHz/cm2]: 92.4 94.0 85.7 154.3 143.2 163.4 159.1 173.8 181.2 174.7 185.6 158.8 146.8 93.7 102.6 104.6
[09:09:55.346] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[09:09:55.370] <TB2> INFO: PixTest:: pg_setup set to default.
[09:09:55.381] <TB2> INFO: enter test to run
[09:09:55.381] <TB2> INFO: test: no parameter change
[09:09:55.707] <TB2> QUIET: Connection to board 162 closed.
[09:09:55.786] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[09:10:39.363] <TB2> INFO: *** Welcome to pxar ***
[09:10:39.363] <TB2> INFO: *** Today: 2016/10/10
[09:10:39.432] <TB2> INFO: *** Version: f5d3-dirty
[09:10:39.432] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//017_HREfficiency_200//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//017_HREfficiency_200//dacParameters35_C15.dat
[09:10:39.433] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//017_HREfficiency_200//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//017_HREfficiency_200//tbmParameters_C0b.dat
[09:10:39.433] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//017_HREfficiency_200//defaultMaskFile.dat
[09:10:39.433] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//017_HREfficiency_200//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//017_HREfficiency_200//trimParameters35_C15.dat
[09:10:39.510] <TB2> INFO: clk: 4
[09:10:39.510] <TB2> INFO: ctr: 4
[09:10:39.510] <TB2> INFO: sda: 19
[09:10:39.510] <TB2> INFO: tin: 9
[09:10:39.510] <TB2> INFO: level: 15
[09:10:39.510] <TB2> INFO: triggerdelay: 0
[09:10:39.510] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[09:10:39.510] <TB2> INFO: Log level: INFO
[09:10:39.523] <TB2> INFO: Found DTB DTB_WXENWR
[09:10:39.534] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[09:10:39.535] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[09:10:39.537] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[09:10:41.078] <TB2> INFO: DUT info:
[09:10:41.078] <TB2> INFO: The DUT currently contains the following objects:
[09:10:41.078] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[09:10:41.078] <TB2> INFO: TBM Core alpha (0): 7 registers set
[09:10:41.078] <TB2> INFO: TBM Core beta (1): 7 registers set
[09:10:41.078] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:10:41.078] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.078] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:10:41.479] <TB2> INFO: enter 'restricted' command line mode
[09:10:41.479] <TB2> INFO: enter test to run
[09:10:41.479] <TB2> INFO: test: PixelAlive no parameter change
[09:10:41.479] <TB2> INFO: running: pixelalive
[09:10:41.482] <TB2> INFO: ######################################################################
[09:10:41.482] <TB2> INFO: PixTestAlive::doTest()
[09:10:41.482] <TB2> INFO: ######################################################################
[09:10:41.483] <TB2> INFO: ----------------------------------------------------------------------
[09:10:41.483] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:10:41.483] <TB2> INFO: ----------------------------------------------------------------------
[09:10:41.751] <TB2> INFO: Expecting 208000 events.
[09:10:51.174] <TB2> INFO: 208000 events read in total (8865ms).
[09:10:51.176] <TB2> INFO: Test took 9692ms.
[09:10:51.404] <TB2> INFO: PixTestAlive::aliveTest() done
[09:10:51.404] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:10:51.405] <TB2> INFO: ----------------------------------------------------------------------
[09:10:51.405] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:10:51.405] <TB2> INFO: ----------------------------------------------------------------------
[09:10:51.676] <TB2> INFO: Expecting 208000 events.
[09:10:58.125] <TB2> INFO: 208000 events read in total (5893ms).
[09:10:58.126] <TB2> INFO: Test took 6719ms.
[09:10:58.126] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[09:10:58.330] <TB2> INFO: PixTestAlive::maskTest() done
[09:10:58.330] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:10:58.332] <TB2> INFO: ----------------------------------------------------------------------
[09:10:58.332] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:10:58.332] <TB2> INFO: ----------------------------------------------------------------------
[09:10:58.602] <TB2> INFO: Expecting 208000 events.
[09:11:07.619] <TB2> INFO: 208000 events read in total (8461ms).
[09:11:07.619] <TB2> INFO: Test took 9286ms.
[09:11:07.816] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[09:11:07.816] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:11:07.816] <TB2> INFO: PixTestAlive::doTest() done, duration: 26 seconds
[09:11:07.846] <TB2> INFO: enter test to run
[09:11:07.846] <TB2> INFO: test: delay setting parameters: ->2<-
[09:11:07.846] <TB2> INFO: delay test by 2 seconds...
[09:11:09.846] <TB2> INFO: enter test to run
[09:11:09.846] <TB2> INFO: test: HighRate no parameter change
[09:11:09.846] <TB2> INFO: running: highrate
[09:11:09.846] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//017_HREfficiency_200//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//017_HREfficiency_200//phCalibrationFitErr35_C15.dat
[09:11:09.984] <TB2> INFO: ----------------------------------------------------------------------
[09:11:09.984] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[09:11:09.984] <TB2> INFO: ----------------------------------------------------------------------
[09:11:10.470] <TB2> INFO: Expecting 208000 events.
[09:11:22.208] <TB2> WARNING: Channel 1 ROC 3: Readback start marker after 2 readouts!

[09:11:22.208] <TB2> ERROR: <datapipe.cc/CheckEventValidity:L523> Channel 1 Number of ROCs (5) != Token Chain Length (4)

[09:11:22.208] <TB2> ERROR: <datapipe.cc/Read:L170> Dumping the flawed event +- 3 events:

[09:11:22.208] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a174 80b0 4300 50d 22c1 853 2a81 4300 291 286f 305 222d 4d9 2061 50d 22a2 694 262c 851 2a2c 4300 281 2040 50d 2289 4300 15b 2a81 15c 2240 411 2485 403 2880 405 2a65 e002 c000

[09:11:22.208] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a16e 8000 4300 160 2662 24c 244d 50d 22ad 4300 401 2849 50d 22a3 685 244c 854 2649 4300 41c 2448 483 2081 4c4 264e 50d 2284 651 2a65 4300 411 2065 50d 22ad 544 266a 560 226b 560 264f 845 2a41 e002 c000

[09:11:22.208] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a16f 8040 4302 4d 2269 153 2066 50d 22a0 645 2460 742 2867 742 2a85 4302 404 2461 50d 22a5 4302 4a 242d 41 244d 50d 2285 744 2849 4302 21a 2665 21b 2269 495 228b 50d 22c0 611 224d 614 264f 75a 2a2c 843 2062 844 2a29 e002 c000

[09:11:22.208] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a170 80b0 4300 48c 2a44 50d 22c0 603 2686 4300 11 286d 44b 2669 50d 22ac 512 2265 4300 42 2829 282 204c 2cb 266d 494 2063 50d 228c 4300 d8 226f 118 244f 50d 228b e002 c000

[09:11:22.208] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a171 80c0 4301 14d 204f 498 2842 50d 22ad 70d 244e 4301 50d 228a 662 2847 809 264c 4301 4302 c00 2824 92c 2902 f51 2284 150 2d28 f50 2d68 171 2804 d85 2304 4301 e1 2885 359 2a65 494 284f 50d 22a5 e002 c000

[09:11:22.208] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a172 8000 4300 2cc 2a40 44b 2281 4c3 2249 50d 22ad 853 224d 862 2665 4300 310 204f 318 2645 50d 2289 692 264d 4301 3 2440 cc 2a6c 30b 2867 343 2461 50d 2287 4301 504 2a4d 50d 228d 549 206c 811 2669 e002 c000

[09:11:22.208] <TB2> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a173 8040 4300 308 2662 348 2447 50d 228f 4301 259 2066 258 2865 2d1 2864 2c5 2247 2ca 2a60 34c 2a4f 50d 228e 4300 82 2869 50d 22ae 680 2a4d 4301 e2 2865 215 2685 50d 22a1 510 2245 6c1 2029 6cd 2a2d e002 c000

[09:11:34.090] <TB2> INFO: 208000 events read in total (23220ms).
[09:11:34.107] <TB2> INFO: Test took 24120ms.
[09:11:35.758] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:11:35.758] <TB2> INFO: number of red-efficiency pixels: 1972 2102 1698 3378 3079 3553 3496 3981 3910 3751 3886 3446 3166 1750 1878 1998
[09:11:35.758] <TB2> INFO: number of X-ray hits detected: 431442 439600 399566 714656 660043 753156 737732 803753 839980 809962 853742 735645 679672 434825 476633 484431
[09:11:35.758] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[09:11:35.758] <TB2> INFO: number of Vcal hits detected: 204897 204794 203214 198434 199749 196970 196257 192323 193018 193968 191252 197351 200057 202843 205215 204778
[09:11:35.758] <TB2> INFO: Vcal hit fiducial efficiency (%): 98.7 98.6 98.1 95.9 96.6 95.4 95.1 93.1 93.4 94.0 92.8 95.5 96.7 98.0 98.8 98.7
[09:11:35.758] <TB2> INFO: Vcal hit overall efficiency (%): 98.5 98.5 97.7 95.4 96.0 94.7 94.4 92.5 92.8 93.3 91.9 94.9 96.2 97.5 98.7 98.5
[09:11:35.758] <TB2> INFO: X-ray hit rate [MHz/cm2]: 126.5 128.8 117.1 209.5 193.5 220.8 216.2 235.6 246.2 237.4 250.2 215.6 199.2 127.5 139.7 142.0
[09:11:35.758] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[09:11:35.784] <TB2> INFO: PixTest:: pg_setup set to default.
[09:11:35.796] <TB2> INFO: enter test to run
[09:11:35.796] <TB2> INFO: test: no parameter change
[09:11:36.082] <TB2> QUIET: Connection to board 162 closed.
[09:11:36.162] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[09:12:17.835] <TB2> INFO: *** Welcome to pxar ***
[09:12:17.835] <TB2> INFO: *** Today: 2016/10/10
[09:12:17.904] <TB2> INFO: *** Version: f5d3-dirty
[09:12:17.904] <TB2> INFO: readRocDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//018_HREfficiency_250//dacParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//018_HREfficiency_250//dacParameters35_C15.dat
[09:12:17.905] <TB2> INFO: readTbmDacs: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//018_HREfficiency_250//tbmParameters_C0a.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//018_HREfficiency_250//tbmParameters_C0b.dat
[09:12:17.905] <TB2> INFO: readMaskFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//018_HREfficiency_250//defaultMaskFile.dat
[09:12:17.905] <TB2> INFO: readTrimFile: /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//018_HREfficiency_250//trimParameters35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//018_HREfficiency_250//trimParameters35_C15.dat
[09:12:17.983] <TB2> INFO: clk: 4
[09:12:17.983] <TB2> INFO: ctr: 4
[09:12:17.983] <TB2> INFO: sda: 19
[09:12:17.983] <TB2> INFO: tin: 9
[09:12:17.983] <TB2> INFO: level: 15
[09:12:17.983] <TB2> INFO: triggerdelay: 0
[09:12:17.983] <TB2> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[09:12:17.983] <TB2> INFO: Log level: INFO
[09:12:17.996] <TB2> INFO: Found DTB DTB_WXENWR
[09:12:18.007] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[09:12:18.009] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[09:12:18.011] <TB2> INFO: RPC call hashes of host and DTB match: 486171790
[09:12:19.564] <TB2> INFO: DUT info:
[09:12:19.564] <TB2> INFO: The DUT currently contains the following objects:
[09:12:19.564] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[09:12:19.565] <TB2> INFO: TBM Core alpha (0): 7 registers set
[09:12:19.565] <TB2> INFO: TBM Core beta (1): 7 registers set
[09:12:19.565] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:12:19.565] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.565] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:12:19.965] <TB2> INFO: enter 'restricted' command line mode
[09:12:19.965] <TB2> INFO: enter test to run
[09:12:19.965] <TB2> INFO: test: PixelAlive no parameter change
[09:12:19.965] <TB2> INFO: running: pixelalive
[09:12:19.969] <TB2> INFO: ######################################################################
[09:12:19.969] <TB2> INFO: PixTestAlive::doTest()
[09:12:19.969] <TB2> INFO: ######################################################################
[09:12:19.970] <TB2> INFO: ----------------------------------------------------------------------
[09:12:19.970] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:12:19.970] <TB2> INFO: ----------------------------------------------------------------------
[09:12:20.247] <TB2> INFO: Expecting 208000 events.
[09:12:29.249] <TB2> INFO: 208000 events read in total (8444ms).
[09:12:29.251] <TB2> INFO: Test took 9280ms.
[09:12:29.474] <TB2> INFO: PixTestAlive::aliveTest() done
[09:12:29.474] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:12:29.475] <TB2> INFO: ----------------------------------------------------------------------
[09:12:29.475] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:12:29.475] <TB2> INFO: ----------------------------------------------------------------------
[09:12:29.736] <TB2> INFO: Expecting 208000 events.
[09:12:36.346] <TB2> INFO: 208000 events read in total (6054ms).
[09:12:36.348] <TB2> INFO: Test took 6872ms.
[09:12:36.348] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[09:12:36.552] <TB2> INFO: PixTestAlive::maskTest() done
[09:12:36.552] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:12:36.553] <TB2> INFO: ----------------------------------------------------------------------
[09:12:36.553] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:12:36.553] <TB2> INFO: ----------------------------------------------------------------------
[09:12:36.844] <TB2> INFO: Expecting 208000 events.
[09:12:46.161] <TB2> INFO: 208000 events read in total (8761ms).
[09:12:46.161] <TB2> INFO: Test took 9607ms.
[09:12:46.365] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[09:12:46.365] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:12:46.365] <TB2> INFO: PixTestAlive::doTest() done, duration: 26 seconds
[09:12:46.410] <TB2> INFO: enter test to run
[09:12:46.410] <TB2> INFO: test: delay setting parameters: ->2<-
[09:12:46.410] <TB2> INFO: delay test by 2 seconds...
[09:12:48.410] <TB2> INFO: enter test to run
[09:12:48.410] <TB2> INFO: test: HighRate no parameter change
[09:12:48.410] <TB2> INFO: running: highrate
[09:12:48.411] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//018_HREfficiency_250//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2354_XrayQualification_2016-10-10_09h55m_1476086146//018_HREfficiency_250//phCalibrationFitErr35_C15.dat
[09:12:48.562] <TB2> INFO: ----------------------------------------------------------------------
[09:12:48.562] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[09:12:48.562] <TB2> INFO: ----------------------------------------------------------------------
[09:12:49.048] <TB2> INFO: Expecting 208000 events.
[09:13:16.763] <TB2> INFO: 193250 events read in total (27314ms).
[09:13:19.009] <TB2> INFO: 208000 events read in total (29560ms).
[09:13:19.027] <TB2> INFO: Test took 30462ms.
[09:13:21.020] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:13:21.020] <TB2> INFO: number of red-efficiency pixels: 2793 2984 2164 3936 3712 4014 3981 4148 4122 4087 4131 3954 3868 2232 2778 2782
[09:13:21.020] <TB2> INFO: number of X-ray hits detected: 537432 543828 495144 885764 814753 934917 910378 995644 1040574 1002273 1058271 907787 837441 537193 593541 600212
[09:13:21.020] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[09:13:21.020] <TB2> INFO: number of Vcal hits detected: 202214 201904 199704 189720 192852 187400 186792 179247 180186 182514 177538 188070 192738 198874 202628 202079
[09:13:21.020] <TB2> INFO: Vcal hit fiducial efficiency (%): 97.5 97.3 96.7 92.1 93.6 91.2 91.0 87.1 87.6 88.9 86.6 91.5 93.4 96.3 97.6 97.5
[09:13:21.020] <TB2> INFO: Vcal hit overall efficiency (%): 97.2 97.1 96.0 91.2 92.7 90.1 89.8 86.2 86.6 87.7 85.4 90.4 92.7 95.6 97.4 97.2
[09:13:21.020] <TB2> INFO: X-ray hit rate [MHz/cm2]: 157.5 159.4 145.1 259.6 238.8 274.0 266.8 291.8 305.0 293.8 310.2 266.1 245.5 157.5 174.0 175.9
[09:13:21.020] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[09:13:21.048] <TB2> INFO: PixTest:: pg_setup set to default.
[09:13:21.067] <TB2> INFO: enter test to run
[09:13:21.067] <TB2> INFO: test: no parameter change
[09:13:21.333] <TB2> QUIET: Connection to board 162 closed.
[09:13:21.414] <TB2> INFO: pXar: this is the end, my friend
MoReWeb-v1.0.4-4-g297680c on branch psi46master