[08:44:23.642] <TB3> INFO: *** Welcome to pxar ***
[08:44:23.642] <TB3> INFO: *** Today: 2016/03/29
[08:44:23.705] <TB3> INFO: *** Version: 9751
[08:44:23.705] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//000_PixelAlive_p17//dacParameters35_C15.dat
[08:44:23.705] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//000_PixelAlive_p17//tbmParameters_C0b.dat
[08:44:23.705] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//000_PixelAlive_p17//defaultMaskFile.dat
[08:44:23.705] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//000_PixelAlive_p17//trimParameters35_C15.dat
[08:44:23.774] <TB3> INFO: clk: 4
[08:44:23.774] <TB3> INFO: ctr: 4
[08:44:23.774] <TB3> INFO: sda: 19
[08:44:23.774] <TB3> INFO: tin: 9
[08:44:23.774] <TB3> INFO: level: 15
[08:44:23.774] <TB3> INFO: triggerdelay: 0
[08:44:23.774] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[08:44:23.774] <TB3> INFO: Log level: INFO
[08:44:23.786] <TB3> INFO: Found DTB DTB_WWV6Z5
[08:44:23.799] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[08:44:23.801] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[08:44:23.803] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[08:44:25.345] <TB3> INFO: DUT info:
[08:44:25.345] <TB3> INFO: The DUT currently contains the following objects:
[08:44:25.345] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[08:44:25.345] <TB3> INFO: TBM Core alpha (0): 7 registers set
[08:44:25.345] <TB3> INFO: TBM Core beta (1): 7 registers set
[08:44:25.345] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[08:44:25.345] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.345] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.345] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.346] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.346] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.346] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.346] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.346] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.346] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.346] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.346] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.346] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.346] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.346] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.346] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.346] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[08:44:25.747] <TB3> INFO: enter 'restricted' command line mode
[08:44:25.747] <TB3> INFO: enter test to run
[08:44:25.747] <TB3> INFO: test: PixelAlive no parameter change
[08:44:25.747] <TB3> INFO: running: pixelalive
[08:44:25.753] <TB3> INFO: ######################################################################
[08:44:25.753] <TB3> INFO: PixTestAlive::doTest()
[08:44:25.753] <TB3> INFO: ######################################################################
[08:44:25.754] <TB3> INFO: ----------------------------------------------------------------------
[08:44:25.754] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[08:44:25.754] <TB3> INFO: ----------------------------------------------------------------------
[08:44:26.023] <TB3> INFO: Expecting 41600 events.
[08:44:29.728] <TB3> INFO: 41600 events read in total (3147ms).
[08:44:29.776] <TB3> INFO: Test took 4020ms.
[08:44:29.993] <TB3> INFO: PixTestAlive::aliveTest() done
[08:44:29.993] <TB3> INFO: number of dead pixels (per ROC): 0 0 1 0 0 0 1 0 0 0 0 0 0 1 0 0
[08:44:29.994] <TB3> INFO: ----------------------------------------------------------------------
[08:44:29.994] <TB3> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[08:44:29.994] <TB3> INFO: ----------------------------------------------------------------------
[08:44:30.248] <TB3> INFO: Expecting 41600 events.
[08:44:33.163] <TB3> INFO: 41600 events read in total (2358ms).
[08:44:33.163] <TB3> INFO: Test took 3167ms.
[08:44:33.163] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[08:44:33.406] <TB3> INFO: PixTestAlive::maskTest() done
[08:44:33.406] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[08:44:33.407] <TB3> INFO: ----------------------------------------------------------------------
[08:44:33.407] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[08:44:33.407] <TB3> INFO: ----------------------------------------------------------------------
[08:44:33.662] <TB3> INFO: Expecting 41600 events.
[08:44:37.353] <TB3> INFO: 41600 events read in total (3134ms).
[08:44:37.354] <TB3> INFO: Test took 3946ms.
[08:44:37.582] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[08:44:37.582] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[08:44:37.582] <TB3> INFO: PixTestAlive::doTest() done, duration: 11 seconds
[08:44:37.612] <TB3> INFO: enter test to run
[08:44:37.612] <TB3> INFO: test: no parameter change
[08:44:37.823] <TB3> QUIET: Connection to board 121 closed.
[08:44:37.903] <TB3> INFO: pXar: this is the end, my friend
commander_RetrimHotPixels.log
[08:49:47.010] <TB3> INFO: *** Welcome to pxar ***
[08:49:47.010] <TB3> INFO: *** Today: 2016/03/29
[08:49:47.075] <TB3> INFO: *** Version: 9751
[08:49:47.075] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//dacParameters35_C15.dat
[08:49:47.075] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[08:49:47.075] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//defaultMaskFile.dat
[08:49:47.075] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C15.dat
[08:49:47.166] <TB3> INFO: clk: 4
[08:49:47.166] <TB3> INFO: ctr: 4
[08:49:47.166] <TB3> INFO: sda: 19
[08:49:47.166] <TB3> INFO: tin: 9
[08:49:47.166] <TB3> INFO: level: 15
[08:49:47.166] <TB3> INFO: triggerdelay: 0
[08:49:47.166] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[08:49:47.166] <TB3> INFO: Log level: INFO
[08:49:47.179] <TB3> INFO: Found DTB DTB_WWV6Z5
[08:49:47.191] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[08:49:47.193] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[08:49:47.195] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[08:49:48.751] <TB3> INFO: DUT info:
[08:49:48.751] <TB3> INFO: The DUT currently contains the following objects:
[08:49:48.751] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[08:49:48.751] <TB3> INFO: TBM Core alpha (0): 7 registers set
[08:49:48.751] <TB3> INFO: TBM Core beta (1): 7 registers set
[08:49:48.751] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[08:49:48.751] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:49.152] <TB3> INFO: enter 'restricted' command line mode
[08:49:49.152] <TB3> INFO: enter test to run
[08:49:49.152] <TB3> INFO: test: delay setting parameters: ->5<-
[08:49:49.152] <TB3> INFO: delay test by 5 seconds...
[08:49:54.152] <TB3> INFO: enter test to run
[08:49:54.152] <TB3> INFO: test: highrate no parameter change
[08:49:54.152] <TB3> INFO: running: highrate
[08:49:54.152] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[08:49:54.321] <TB3> INFO: ----------------------------------------------------------------------
[08:49:54.321] <TB3> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[08:49:54.321] <TB3> INFO: ----------------------------------------------------------------------
[08:49:54.321] <TB3> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[08:49:54.321] <TB3> INFO: edge/corner pixel THR is adjusted
[08:49:54.321] <TB3> INFO: PixTestHighRate::trimHotPixels: step 0...
[08:49:55.042] <TB3> INFO: Collecting data for 1 seconds...
[08:49:56.043] <TB3> INFO: Done with hot pixel readout
[08:50:02.179] <TB3> INFO: PixTest:: pg_setup set to default.
[08:50:02.179] <TB3> INFO: 1 hot pixels found in step 0
[08:50:02.900] <TB3> INFO: Collecting data for 1 seconds...
[08:50:03.901] <TB3> INFO: Done with hot pixel readout
[08:50:09.960] <TB3> INFO: PixTest:: pg_setup set to default.
[08:50:09.961] <TB3> INFO: 0 hot pixels found in step 1
[08:50:09.968] <TB3> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[08:50:09.998] <TB3> INFO: PixTest::trimHotPixels() done
[08:50:09.998] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C0.dat
[08:50:10.004] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C1.dat
[08:50:10.010] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C2.dat
[08:50:10.016] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C3.dat
[08:50:10.022] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C4.dat
[08:50:10.028] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C5.dat
[08:50:10.034] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C6.dat
[08:50:10.040] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C7.dat
[08:50:10.047] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C8.dat
[08:50:10.053] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C9.dat
[08:50:10.059] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C10.dat
[08:50:10.065] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C11.dat
[08:50:10.071] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C12.dat
[08:50:10.077] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C13.dat
[08:50:10.083] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C14.dat
[08:50:10.089] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C15.dat
[08:50:10.095] <TB3> INFO: write masked pixels into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//defaultMaskFile.dat
[08:50:10.128] <TB3> INFO: enter test to run
[08:50:10.128] <TB3> INFO: test: no parameter change
[08:50:10.331] <TB3> QUIET: Connection to board 121 closed.
[08:50:10.411] <TB3> INFO: pXar: this is the end, my friend
commander_RetrimHotPixels.log
[08:49:47.010] <TB3> INFO: *** Welcome to pxar ***
[08:49:47.010] <TB3> INFO: *** Today: 2016/03/29
[08:49:47.075] <TB3> INFO: *** Version: 9751
[08:49:47.075] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//dacParameters35_C15.dat
[08:49:47.075] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[08:49:47.075] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//defaultMaskFile.dat
[08:49:47.075] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C15.dat
[08:49:47.166] <TB3> INFO: clk: 4
[08:49:47.166] <TB3> INFO: ctr: 4
[08:49:47.166] <TB3> INFO: sda: 19
[08:49:47.166] <TB3> INFO: tin: 9
[08:49:47.166] <TB3> INFO: level: 15
[08:49:47.166] <TB3> INFO: triggerdelay: 0
[08:49:47.166] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[08:49:47.166] <TB3> INFO: Log level: INFO
[08:49:47.179] <TB3> INFO: Found DTB DTB_WWV6Z5
[08:49:47.191] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[08:49:47.193] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[08:49:47.195] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[08:49:48.751] <TB3> INFO: DUT info:
[08:49:48.751] <TB3> INFO: The DUT currently contains the following objects:
[08:49:48.751] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[08:49:48.751] <TB3> INFO: TBM Core alpha (0): 7 registers set
[08:49:48.751] <TB3> INFO: TBM Core beta (1): 7 registers set
[08:49:48.751] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[08:49:48.751] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:48.751] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[08:49:49.152] <TB3> INFO: enter 'restricted' command line mode
[08:49:49.152] <TB3> INFO: enter test to run
[08:49:49.152] <TB3> INFO: test: delay setting parameters: ->5<-
[08:49:49.152] <TB3> INFO: delay test by 5 seconds...
[08:49:54.152] <TB3> INFO: enter test to run
[08:49:54.152] <TB3> INFO: test: highrate no parameter change
[08:49:54.152] <TB3> INFO: running: highrate
[08:49:54.152] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[08:49:54.321] <TB3> INFO: ----------------------------------------------------------------------
[08:49:54.321] <TB3> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[08:49:54.321] <TB3> INFO: ----------------------------------------------------------------------
[08:49:54.321] <TB3> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[08:49:54.321] <TB3> INFO: edge/corner pixel THR is adjusted
[08:49:54.321] <TB3> INFO: PixTestHighRate::trimHotPixels: step 0...
[08:49:55.042] <TB3> INFO: Collecting data for 1 seconds...
[08:49:56.043] <TB3> INFO: Done with hot pixel readout
[08:50:02.179] <TB3> INFO: PixTest:: pg_setup set to default.
[08:50:02.179] <TB3> INFO: 1 hot pixels found in step 0
[08:50:02.900] <TB3> INFO: Collecting data for 1 seconds...
[08:50:03.901] <TB3> INFO: Done with hot pixel readout
[08:50:09.960] <TB3> INFO: PixTest:: pg_setup set to default.
[08:50:09.961] <TB3> INFO: 0 hot pixels found in step 1
[08:50:09.968] <TB3> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[08:50:09.998] <TB3> INFO: PixTest::trimHotPixels() done
[08:50:09.998] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C0.dat
[08:50:10.004] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C1.dat
[08:50:10.010] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C2.dat
[08:50:10.016] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C3.dat
[08:50:10.022] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C4.dat
[08:50:10.028] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C5.dat
[08:50:10.034] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C6.dat
[08:50:10.040] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C7.dat
[08:50:10.047] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C8.dat
[08:50:10.053] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C9.dat
[08:50:10.059] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C10.dat
[08:50:10.065] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C11.dat
[08:50:10.071] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C12.dat
[08:50:10.077] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C13.dat
[08:50:10.083] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C14.dat
[08:50:10.089] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//trimParameters35_C15.dat
[08:50:10.095] <TB3> INFO: write masked pixels into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//002_RetrimHotPixels_150//defaultMaskFile.dat
[08:50:10.128] <TB3> INFO: enter test to run
[08:50:10.128] <TB3> INFO: test: no parameter change
[08:50:10.331] <TB3> QUIET: Connection to board 121 closed.
[08:50:10.411] <TB3> INFO: pXar: this is the end, my friend
[08:50:46.766] <TB3> INFO: *** Welcome to pxar ***
[08:50:46.766] <TB3> INFO: *** Today: 2016/03/29
[08:50:46.832] <TB3> INFO: *** Version: 9751
[08:50:46.832] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//dacParameters35_C15.dat
[08:50:46.833] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//tbmParameters_C0b.dat
[08:50:46.833] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//defaultMaskFile.dat
[08:50:46.833] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C15.dat
[08:50:46.902] <TB3> INFO: clk: 4
[08:50:46.902] <TB3> INFO: ctr: 4
[08:50:46.902] <TB3> INFO: sda: 19
[08:50:46.902] <TB3> INFO: tin: 9
[08:50:46.902] <TB3> INFO: level: 15
[08:50:46.902] <TB3> INFO: triggerdelay: 0
[08:50:46.902] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[08:50:46.902] <TB3> INFO: Log level: INFO
[08:50:47.914] <TB3> INFO: Found DTB DTB_WWV6Z5
[08:50:50.933] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[08:50:50.935] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[08:50:50.937] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[08:50:52.469] <TB3> INFO: DUT info:
[08:50:52.469] <TB3> INFO: The DUT currently contains the following objects:
[08:50:52.469] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[08:50:52.469] <TB3> INFO: TBM Core alpha (0): 7 registers set
[08:50:52.469] <TB3> INFO: TBM Core beta (1): 7 registers set
[08:50:52.469] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[08:50:52.469] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.469] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[08:50:52.869] <TB3> INFO: enter 'restricted' command line mode
[08:50:52.869] <TB3> INFO: enter test to run
[08:50:52.870] <TB3> INFO: test: delay setting parameters: ->5<-
[08:50:52.870] <TB3> INFO: delay test by 5 seconds...
[08:50:57.870] <TB3> INFO: enter test to run
[08:50:57.870] <TB3> INFO: test: highrate no parameter change
[08:50:57.870] <TB3> INFO: running: highrate
[08:50:57.870] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//phCalibrationFitErr35_C15.dat
[08:50:58.000] <TB3> INFO: ----------------------------------------------------------------------
[08:50:58.000] <TB3> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[08:50:58.000] <TB3> INFO: ----------------------------------------------------------------------
[08:50:58.000] <TB3> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[08:50:58.000] <TB3> INFO: edge/corner pixel THR is adjusted
[08:50:58.000] <TB3> INFO: PixTestHighRate::trimHotPixels: step 0...
[08:50:58.718] <TB3> INFO: Collecting data for 1 seconds...
[08:50:59.718] <TB3> INFO: Done with hot pixel readout
[08:51:03.401] <TB3> INFO: PixTest:: pg_setup set to default.
[08:51:03.402] <TB3> INFO: 0 hot pixels found in step 0
[08:51:03.405] <TB3> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[08:51:03.442] <TB3> INFO: PixTest::trimHotPixels() done
[08:51:03.442] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C0.dat
[08:51:03.448] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C1.dat
[08:51:03.454] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C2.dat
[08:51:03.460] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C3.dat
[08:51:03.466] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C4.dat
[08:51:03.472] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C5.dat
[08:51:03.478] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C6.dat
[08:51:03.484] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C7.dat
[08:51:03.490] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C8.dat
[08:51:03.496] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C9.dat
[08:51:03.502] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C10.dat
[08:51:03.508] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C11.dat
[08:51:03.514] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C12.dat
[08:51:03.520] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C13.dat
[08:51:03.526] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C14.dat
[08:51:03.532] <TB3> INFO: write trim parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//trimParameters35_C15.dat
[08:51:03.538] <TB3> INFO: write masked pixels into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//003_RetrimHotPixels_50//defaultMaskFile.dat
[08:51:03.568] <TB3> INFO: enter test to run
[08:51:03.568] <TB3> INFO: test: no parameter change
[08:51:03.815] <TB3> QUIET: Connection to board 121 closed.
[08:51:03.895] <TB3> INFO: pXar: this is the end, my friend
[08:51:39.362] <TB3> INFO: *** Welcome to pxar ***
[08:51:39.362] <TB3> INFO: *** Today: 2016/03/29
[08:51:39.428] <TB3> INFO: *** Version: 9751
[08:51:39.428] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//004_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//004_HRData_50//dacParameters35_C15.dat
[08:51:39.429] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//004_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//004_HRData_50//tbmParameters_C0b.dat
[08:51:39.429] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//004_HRData_50//defaultMaskFile.dat
[08:51:39.429] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//004_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//004_HRData_50//trimParameters35_C15.dat
[08:51:39.499] <TB3> INFO: clk: 4
[08:51:39.499] <TB3> INFO: ctr: 4
[08:51:39.499] <TB3> INFO: sda: 19
[08:51:39.499] <TB3> INFO: tin: 9
[08:51:39.499] <TB3> INFO: level: 15
[08:51:39.499] <TB3> INFO: triggerdelay: 0
[08:51:39.499] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[08:51:39.499] <TB3> INFO: Log level: INFO
[08:51:40.511] <TB3> INFO: Found DTB DTB_WWV6Z5
[08:51:43.529] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[08:51:43.531] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[08:51:43.533] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[08:51:45.069] <TB3> INFO: DUT info:
[08:51:45.069] <TB3> INFO: The DUT currently contains the following objects:
[08:51:45.069] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[08:51:45.069] <TB3> INFO: TBM Core alpha (0): 7 registers set
[08:51:45.069] <TB3> INFO: TBM Core beta (1): 7 registers set
[08:51:45.069] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[08:51:45.069] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.069] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[08:51:45.470] <TB3> INFO: enter 'restricted' command line mode
[08:51:45.470] <TB3> INFO: enter test to run
[08:51:45.470] <TB3> INFO: test: delay setting parameters: ->5<-
[08:51:45.470] <TB3> INFO: delay test by 5 seconds...
[08:51:50.470] <TB3> INFO: enter test to run
[08:51:50.470] <TB3> INFO: test: Xray no parameter change
[08:51:50.470] <TB3> INFO: running: xray
[08:51:50.470] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//004_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//004_HRData_50//phCalibrationFitErr35_C15.dat
[08:51:50.640] <TB3> INFO: ######################################################################
[08:51:50.640] <TB3> INFO: PixTestXray::doTest()
[08:51:50.640] <TB3> INFO: ######################################################################
[08:51:50.640] <TB3> INFO: ----------------------------------------------------------------------
[08:51:50.640] <TB3> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[08:51:50.640] <TB3> INFO: ----------------------------------------------------------------------
[08:51:51.365] <TB3> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[08:51:58.375] <TB3> INFO: run duration 7 seconds, buffer almost full (81%), pausing triggers.
[08:52:26.475] <TB3> INFO: Resuming triggers.
[08:52:33.495] <TB3> INFO: run duration 14 seconds, buffer almost full (81%), pausing triggers.
[08:53:01.790] <TB3> INFO: Resuming triggers.
[08:53:08.809] <TB3> INFO: run duration 21 seconds, buffer almost full (81%), pausing triggers.
[08:53:36.810] <TB3> INFO: Resuming triggers.
[08:53:43.828] <TB3> INFO: run duration 28 seconds, buffer almost full (81%), pausing triggers.
[08:54:11.863] <TB3> INFO: Resuming triggers.
[08:54:18.883] <TB3> INFO: run duration 35 seconds, buffer almost full (81%), pausing triggers.
[08:54:46.668] <TB3> INFO: Resuming triggers.
[08:54:53.688] <TB3> INFO: run duration 42 seconds, buffer almost full (81%), pausing triggers.
[08:55:21.603] <TB3> INFO: Resuming triggers.
[08:55:28.621] <TB3> INFO: run duration 49 seconds, buffer almost full (81%), pausing triggers.
[08:55:57.086] <TB3> INFO: Resuming triggers.
[08:56:04.102] <TB3> INFO: run duration 56 seconds, buffer almost full (81%), pausing triggers.
[08:56:31.903] <TB3> INFO: Resuming triggers.
[08:56:38.915] <TB3> INFO: run duration 63 seconds, buffer almost full (81%), pausing triggers.
[08:57:07.027] <TB3> INFO: Resuming triggers.
[08:57:14.041] <TB3> INFO: run duration 70 seconds, buffer almost full (81%), pausing triggers.
[08:57:42.068] <TB3> INFO: Resuming triggers.
[08:57:49.082] <TB3> INFO: run duration 77 seconds, buffer almost full (81%), pausing triggers.
[08:58:17.283] <TB3> INFO: Resuming triggers.
[08:58:24.300] <TB3> INFO: run duration 84 seconds, buffer almost full (81%), pausing triggers.
[08:58:52.319] <TB3> INFO: Resuming triggers.
[08:58:59.330] <TB3> INFO: run duration 91 seconds, buffer almost full (81%), pausing triggers.
[08:59:27.525] <TB3> INFO: Resuming triggers.
[08:59:34.539] <TB3> INFO: run duration 98 seconds, buffer almost full (81%), pausing triggers.
[09:00:02.379] <TB3> INFO: Resuming triggers.
[09:00:04.247] <TB3> INFO: data taking finished, elapsed time: 100 seconds.
[09:00:11.864] <TB3> INFO: PixTest:: pg_setup set to default.
[09:00:11.865] <TB3> INFO: PixTestXray::doPhRun() done
[09:00:11.865] <TB3> INFO: PixTestXray::doTest() done
[09:00:12.041] <TB3> INFO: enter test to run
[09:00:12.041] <TB3> INFO: test: no parameter change
[09:00:12.343] <TB3> QUIET: Connection to board 121 closed.
[09:00:12.422] <TB3> INFO: pXar: this is the end, my friend
[09:01:12.202] <TB3> INFO: *** Welcome to pxar ***
[09:01:12.202] <TB3> INFO: *** Today: 2016/03/29
[09:01:12.269] <TB3> INFO: *** Version: 9751
[09:01:12.269] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//005_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//005_HRData_150//dacParameters35_C15.dat
[09:01:12.270] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//005_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//005_HRData_150//tbmParameters_C0b.dat
[09:01:12.270] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//005_HRData_150//defaultMaskFile.dat
[09:01:12.270] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//005_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//005_HRData_150//trimParameters35_C15.dat
[09:01:12.340] <TB3> INFO: clk: 4
[09:01:12.340] <TB3> INFO: ctr: 4
[09:01:12.341] <TB3> INFO: sda: 19
[09:01:12.341] <TB3> INFO: tin: 9
[09:01:12.341] <TB3> INFO: level: 15
[09:01:12.341] <TB3> INFO: triggerdelay: 0
[09:01:12.341] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[09:01:12.341] <TB3> INFO: Log level: INFO
[09:01:13.353] <TB3> INFO: Found DTB DTB_WWV6Z5
[09:01:16.371] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[09:01:16.373] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[09:01:16.375] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[09:01:17.910] <TB3> INFO: DUT info:
[09:01:17.910] <TB3> INFO: The DUT currently contains the following objects:
[09:01:17.910] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[09:01:17.910] <TB3> INFO: TBM Core alpha (0): 7 registers set
[09:01:17.910] <TB3> INFO: TBM Core beta (1): 7 registers set
[09:01:17.910] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:01:17.910] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:17.910] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:01:18.311] <TB3> INFO: enter 'restricted' command line mode
[09:01:18.311] <TB3> INFO: enter test to run
[09:01:18.311] <TB3> INFO: test: delay setting parameters: ->5<-
[09:01:18.311] <TB3> INFO: delay test by 5 seconds...
[09:01:23.311] <TB3> INFO: enter test to run
[09:01:23.311] <TB3> INFO: test: Xray no parameter change
[09:01:23.311] <TB3> INFO: running: xray
[09:01:23.311] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//005_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//005_HRData_150//phCalibrationFitErr35_C15.dat
[09:01:23.461] <TB3> INFO: ######################################################################
[09:01:23.461] <TB3> INFO: PixTestXray::doTest()
[09:01:23.461] <TB3> INFO: ######################################################################
[09:01:23.461] <TB3> INFO: ----------------------------------------------------------------------
[09:01:23.461] <TB3> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[09:01:23.461] <TB3> INFO: ----------------------------------------------------------------------
[09:01:24.184] <TB3> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[09:01:28.139] <TB3> INFO: run duration 3 seconds, buffer almost full (81%), pausing triggers.
[09:01:56.374] <TB3> INFO: Resuming triggers.
[09:02:00.338] <TB3> INFO: run duration 7 seconds, buffer almost full (81%), pausing triggers.
[09:02:28.529] <TB3> INFO: Resuming triggers.
[09:02:32.489] <TB3> INFO: run duration 11 seconds, buffer almost full (81%), pausing triggers.
[09:03:00.817] <TB3> INFO: Resuming triggers.
[09:03:04.778] <TB3> INFO: run duration 15 seconds, buffer almost full (81%), pausing triggers.
[09:03:32.639] <TB3> INFO: Resuming triggers.
[09:03:36.603] <TB3> INFO: run duration 19 seconds, buffer almost full (81%), pausing triggers.
[09:04:04.093] <TB3> INFO: Resuming triggers.
[09:04:08.051] <TB3> INFO: run duration 23 seconds, buffer almost full (81%), pausing triggers.
[09:04:35.458] <TB3> INFO: Resuming triggers.
[09:04:39.418] <TB3> INFO: run duration 27 seconds, buffer almost full (81%), pausing triggers.
[09:05:07.214] <TB3> INFO: Resuming triggers.
[09:05:11.174] <TB3> INFO: run duration 31 seconds, buffer almost full (81%), pausing triggers.
[09:05:38.911] <TB3> INFO: Resuming triggers.
[09:05:42.872] <TB3> INFO: run duration 35 seconds, buffer almost full (81%), pausing triggers.
[09:06:10.450] <TB3> INFO: Resuming triggers.
[09:06:14.410] <TB3> INFO: run duration 39 seconds, buffer almost full (81%), pausing triggers.
[09:06:42.239] <TB3> INFO: Resuming triggers.
[09:06:46.197] <TB3> INFO: run duration 43 seconds, buffer almost full (81%), pausing triggers.
[09:07:13.529] <TB3> INFO: Resuming triggers.
[09:07:17.487] <TB3> INFO: run duration 47 seconds, buffer almost full (81%), pausing triggers.
[09:07:45.108] <TB3> INFO: Resuming triggers.
[09:07:49.065] <TB3> INFO: run duration 51 seconds, buffer almost full (81%), pausing triggers.
[09:08:17.069] <TB3> INFO: Resuming triggers.
[09:08:21.030] <TB3> INFO: run duration 55 seconds, buffer almost full (81%), pausing triggers.
[09:08:48.886] <TB3> INFO: Resuming triggers.
[09:08:52.843] <TB3> INFO: run duration 59 seconds, buffer almost full (81%), pausing triggers.
[09:09:20.705] <TB3> INFO: Resuming triggers.
[09:09:24.660] <TB3> INFO: run duration 63 seconds, buffer almost full (81%), pausing triggers.
[09:09:52.388] <TB3> INFO: Resuming triggers.
[09:09:56.345] <TB3> INFO: run duration 67 seconds, buffer almost full (81%), pausing triggers.
[09:10:24.105] <TB3> INFO: Resuming triggers.
[09:10:28.065] <TB3> INFO: run duration 71 seconds, buffer almost full (81%), pausing triggers.
[09:10:55.695] <TB3> INFO: Resuming triggers.
[09:10:59.650] <TB3> INFO: run duration 75 seconds, buffer almost full (81%), pausing triggers.
[09:11:27.173] <TB3> INFO: Resuming triggers.
[09:11:31.128] <TB3> INFO: run duration 79 seconds, buffer almost full (81%), pausing triggers.
[09:11:58.794] <TB3> INFO: Resuming triggers.
[09:12:02.750] <TB3> INFO: run duration 83 seconds, buffer almost full (81%), pausing triggers.
[09:12:30.679] <TB3> INFO: Resuming triggers.
[09:12:34.634] <TB3> INFO: run duration 87 seconds, buffer almost full (81%), pausing triggers.
[09:13:02.497] <TB3> INFO: Resuming triggers.
[09:13:06.449] <TB3> INFO: run duration 90 seconds, buffer almost full (81%), pausing triggers.
[09:13:34.613] <TB3> INFO: Resuming triggers.
[09:13:38.566] <TB3> INFO: run duration 94 seconds, buffer almost full (81%), pausing triggers.
[09:14:06.354] <TB3> INFO: Resuming triggers.
[09:14:10.307] <TB3> INFO: run duration 98 seconds, buffer almost full (81%), pausing triggers.
[09:14:39.126] <TB3> INFO: Resuming triggers.
[09:14:40.266] <TB3> INFO: data taking finished, elapsed time: 100 seconds.
[09:14:48.373] <TB3> INFO: PixTest:: pg_setup set to default.
[09:14:48.374] <TB3> INFO: PixTestXray::doPhRun() done
[09:14:48.374] <TB3> INFO: PixTestXray::doTest() done
[09:14:48.555] <TB3> INFO: enter test to run
[09:14:48.555] <TB3> INFO: test: no parameter change
[09:14:48.821] <TB3> QUIET: Connection to board 121 closed.
[09:14:48.900] <TB3> INFO: pXar: this is the end, my friend
[09:17:08.512] <TB3> INFO: *** Welcome to pxar ***
[09:17:08.512] <TB3> INFO: *** Today: 2016/03/29
[09:17:08.586] <TB3> INFO: *** Version: 9751
[09:17:08.586] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//006_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//006_HRSCurves_100//dacParameters35_C15.dat
[09:17:08.586] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//006_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//006_HRSCurves_100//tbmParameters_C0b.dat
[09:17:08.587] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//006_HRSCurves_100//defaultMaskFile.dat
[09:17:08.587] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//006_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//006_HRSCurves_100//trimParameters35_C15.dat
[09:17:08.656] <TB3> INFO: clk: 4
[09:17:08.656] <TB3> INFO: ctr: 4
[09:17:08.656] <TB3> INFO: sda: 19
[09:17:08.656] <TB3> INFO: tin: 9
[09:17:08.656] <TB3> INFO: level: 15
[09:17:08.656] <TB3> INFO: triggerdelay: 0
[09:17:08.656] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[09:17:08.656] <TB3> INFO: Log level: INFO
[09:17:09.669] <TB3> INFO: Found DTB DTB_WWV6Z5
[09:17:12.687] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[09:17:12.689] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[09:17:12.691] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[09:17:14.239] <TB3> INFO: DUT info:
[09:17:14.239] <TB3> INFO: The DUT currently contains the following objects:
[09:17:14.239] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[09:17:14.239] <TB3> INFO: TBM Core alpha (0): 7 registers set
[09:17:14.239] <TB3> INFO: TBM Core beta (1): 7 registers set
[09:17:14.239] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:17:14.239] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.239] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:14.640] <TB3> INFO: enter 'restricted' command line mode
[09:17:14.640] <TB3> INFO: enter test to run
[09:17:14.640] <TB3> INFO: test: Highrate no parameter change
[09:17:14.640] <TB3> INFO: running: highrate
[09:17:14.640] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//006_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//006_HRSCurves_100//phCalibrationFitErr35_C15.dat
[09:17:14.772] <TB3> INFO: ----------------------------------------------------------------------
[09:17:14.772] <TB3> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[09:17:14.772] <TB3> INFO: ----------------------------------------------------------------------
[09:17:14.777] <TB3> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 15 .. 75 (20/-1) hits flags = 896 (plus default)
[09:17:14.788] <TB3> INFO: dacScan step from 15 .. 34
[09:17:14.788] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[09:17:14.788] <TB3> INFO: run 1 of 1
[09:17:15.269] <TB3> INFO: Expecting 4160000 events.
[09:17:48.850] <TB3> INFO: 504200 events read in total (33178ms).
[09:18:22.239] <TB3> INFO: 1009500 events read in total (66567ms).
[09:18:55.413] <TB3> INFO: 1514950 events read in total (99741ms).
[09:19:28.602] <TB3> INFO: 2020350 events read in total (132930ms).
[09:20:01.673] <TB3> INFO: 2525300 events read in total (166001ms).
[09:20:35.273] <TB3> INFO: 3030050 events read in total (199601ms).
[09:21:08.632] <TB3> INFO: 3534800 events read in total (232960ms).
[09:21:42.067] <TB3> INFO: 4039050 events read in total (266395ms).
[09:21:50.265] <TB3> INFO: 4160000 events read in total (274593ms).
[09:21:50.517] <TB3> INFO: Test took 275728ms.
[09:21:56.316] <TB3> INFO: dacScan step from 35 .. 54
[09:21:56.316] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[09:21:56.316] <TB3> INFO: run 1 of 1
[09:21:56.806] <TB3> INFO: Expecting 4160000 events.
[09:22:28.283] <TB3> INFO: 405600 events read in total (31069ms).
[09:22:59.473] <TB3> INFO: 811300 events read in total (62259ms).
[09:23:30.886] <TB3> INFO: 1216300 events read in total (93672ms).
[09:24:02.352] <TB3> INFO: 1620200 events read in total (125138ms).
[09:24:33.558] <TB3> INFO: 2022900 events read in total (156344ms).
[09:25:04.616] <TB3> INFO: 2423550 events read in total (187402ms).
[09:25:35.482] <TB3> INFO: 2820900 events read in total (218268ms).
[09:26:06.766] <TB3> INFO: 3215500 events read in total (249552ms).
[09:26:37.940] <TB3> INFO: 3607650 events read in total (280726ms).
[09:27:08.943] <TB3> INFO: 3998750 events read in total (311729ms).
[09:27:21.793] <TB3> INFO: 4160000 events read in total (324579ms).
[09:27:22.060] <TB3> INFO: Test took 325743ms.
[09:27:27.767] <TB3> INFO: dacScan step from 55 .. 74
[09:27:27.767] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[09:27:27.767] <TB3> INFO: run 1 of 1
[09:27:28.247] <TB3> INFO: Expecting 4160000 events.
[09:27:58.655] <TB3> INFO: 363850 events read in total (30006ms).
[09:28:28.959] <TB3> INFO: 728400 events read in total (60310ms).
[09:28:59.248] <TB3> INFO: 1093150 events read in total (90599ms).
[09:29:29.519] <TB3> INFO: 1458100 events read in total (120870ms).
[09:29:59.928] <TB3> INFO: 1822900 events read in total (151279ms).
[09:30:30.651] <TB3> INFO: 2187900 events read in total (182002ms).
[09:31:00.735] <TB3> INFO: 2552800 events read in total (212086ms).
[09:31:31.024] <TB3> INFO: 2917650 events read in total (242375ms).
[09:32:01.564] <TB3> INFO: 3282750 events read in total (272915ms).
[09:32:31.997] <TB3> INFO: 3647700 events read in total (303348ms).
[09:33:02.289] <TB3> INFO: 4012450 events read in total (333640ms).
[09:33:14.727] <TB3> INFO: 4160000 events read in total (346078ms).
[09:33:14.870] <TB3> INFO: Test took 347102ms.
[09:33:20.634] <TB3> INFO: dacScan step from 75 .. 75
[09:33:20.634] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[09:33:20.634] <TB3> INFO: run 1 of 1
[09:33:21.115] <TB3> INFO: Expecting 208000 events.
[09:33:39.662] <TB3> INFO: 208000 events read in total (18146ms).
[09:33:39.668] <TB3> INFO: Test took 19033ms.
[09:33:39.951] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:41.009] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:42.028] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:43.048] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:44.124] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:45.166] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:46.224] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:47.301] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:48.404] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:49.468] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:50.512] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:51.571] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:52.621] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:53.689] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:54.715] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:55.743] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:33:56.774] <TB3> INFO: PixTest:: pg_setup set to default.
[09:33:56.776] <TB3> INFO: vcal mean: 37.82 37.87 37.26 40.01 39.27 40.88 41.28 40.86 41.26 41.02 41.46 40.74 40.14 37.55 38.29 38.12
[09:33:56.776] <TB3> INFO: vcal RMS: 1.09 1.00 1.13 1.25 1.24 1.31 1.57 1.38 1.30 1.25 1.40 1.45 1.17 1.16 0.99 1.06
[09:33:56.776] <TB3> INFO: number of X-ray hits detected: 161595 159264 148364 253558 277565 331060 326881 313732 329774 318219 338522 295789 263016 142730 178133 171937
[09:33:56.776] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[09:33:56.776] <TB3> INFO: X-ray hit rate [MHz/cm2]: 47.4 46.7 43.5 74.3 81.4 97.0 95.8 92.0 96.7 93.3 99.2 86.7 77.1 41.8 52.2 50.4
[09:33:56.776] <TB3> INFO: PixTestHighRate::doXNoiseMaps() done
[09:33:56.920] <TB3> INFO: enter test to run
[09:33:56.920] <TB3> INFO: test: no parameter change
[09:33:57.219] <TB3> QUIET: Connection to board 121 closed.
[09:33:57.302] <TB3> INFO: pXar: this is the end, my friend
commander_CalDelScanAndSaveDacs.log
[09:55:27.900] <TB3> INFO: *** Welcome to pxar ***
[09:55:27.900] <TB3> INFO: *** Today: 2016/03/29
[09:55:27.964] <TB3> INFO: *** Version: 9751
[09:55:27.964] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[09:55:27.965] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[09:55:27.965] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[09:55:27.965] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[09:55:28.050] <TB3> INFO: clk: 4
[09:55:28.050] <TB3> INFO: ctr: 4
[09:55:28.050] <TB3> INFO: sda: 19
[09:55:28.050] <TB3> INFO: tin: 9
[09:55:28.050] <TB3> INFO: level: 15
[09:55:28.050] <TB3> INFO: triggerdelay: 0
[09:55:28.050] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[09:55:28.050] <TB3> INFO: Log level: INFO
[09:55:29.064] <TB3> INFO: Found DTB DTB_WWV6Z5
[09:55:32.082] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[09:55:32.084] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[09:55:32.086] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[09:55:33.622] <TB3> INFO: DUT info:
[09:55:33.622] <TB3> INFO: The DUT currently contains the following objects:
[09:55:33.622] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[09:55:33.622] <TB3> INFO: TBM Core alpha (0): 7 registers set
[09:55:33.622] <TB3> INFO: TBM Core beta (1): 7 registers set
[09:55:33.622] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:55:33.622] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:33.622] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:55:34.022] <TB3> INFO: enter 'restricted' command line mode
[09:55:34.022] <TB3> INFO: enter test to run
[09:55:34.023] <TB3> INFO: test: HighRate no parameter change
[09:55:34.023] <TB3> INFO: running: highrate
[09:55:34.023] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[09:55:34.155] <TB3> INFO: ----------------------------------------------------------------------
[09:55:34.155] <TB3> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[09:55:34.155] <TB3> INFO: ----------------------------------------------------------------------
[09:55:34.248] <TB3> INFO: Expecting 768 events.
[09:55:35.238] <TB3> INFO: 768 events read in total (432ms).
[09:55:35.301] <TB3> INFO: Test took 1141ms.
[09:55:35.820] <TB3> INFO: Expecting 41600 events.
[09:55:39.264] <TB3> INFO: 41600 events read in total (3043ms).
[09:55:39.265] <TB3> INFO: Test took 3959ms.
[09:55:39.828] <TB3> INFO: Expecting 41600 events.
[09:55:43.367] <TB3> INFO: 41600 events read in total (3138ms).
[09:55:43.368] <TB3> INFO: Test took 4015ms.
[09:55:43.932] <TB3> INFO: Expecting 41600 events.
[09:55:47.565] <TB3> INFO: 41600 events read in total (3231ms).
[09:55:47.567] <TB3> INFO: Test took 4110ms.
[09:55:48.145] <TB3> INFO: Expecting 41600 events.
[09:55:51.706] <TB3> INFO: 41600 events read in total (3160ms).
[09:55:51.707] <TB3> INFO: Test took 4051ms.
[09:55:52.281] <TB3> INFO: Expecting 41600 events.
[09:55:55.800] <TB3> INFO: 41600 events read in total (3117ms).
[09:55:55.802] <TB3> INFO: Test took 4003ms.
[09:55:56.371] <TB3> INFO: Expecting 41600 events.
[09:56:00.030] <TB3> INFO: 41600 events read in total (3257ms).
[09:56:00.032] <TB3> INFO: Test took 4140ms.
[09:56:00.606] <TB3> INFO: Expecting 41600 events.
[09:56:04.277] <TB3> INFO: 41600 events read in total (3269ms).
[09:56:04.279] <TB3> INFO: Test took 4153ms.
[09:56:04.902] <TB3> INFO: Expecting 41600 events.
[09:56:08.486] <TB3> INFO: 41600 events read in total (3182ms).
[09:56:08.488] <TB3> INFO: Test took 4101ms.
[09:56:09.063] <TB3> INFO: Expecting 41600 events.
[09:56:12.601] <TB3> INFO: 41600 events read in total (3137ms).
[09:56:12.603] <TB3> INFO: Test took 4019ms.
[09:56:13.176] <TB3> INFO: Expecting 41600 events.
[09:56:16.747] <TB3> INFO: 41600 events read in total (3169ms).
[09:56:16.749] <TB3> INFO: Test took 4056ms.
[09:56:17.322] <TB3> INFO: Expecting 41600 events.
[09:56:20.933] <TB3> INFO: 41600 events read in total (3209ms).
[09:56:20.934] <TB3> INFO: Test took 4092ms.
[09:56:21.505] <TB3> INFO: Expecting 41600 events.
[09:56:25.069] <TB3> INFO: 41600 events read in total (3163ms).
[09:56:25.071] <TB3> INFO: Test took 4046ms.
[09:56:25.660] <TB3> INFO: Expecting 41600 events.
[09:56:29.283] <TB3> INFO: 41600 events read in total (3221ms).
[09:56:29.284] <TB3> INFO: Test took 4122ms.
[09:56:29.883] <TB3> INFO: Expecting 41600 events.
[09:56:33.673] <TB3> INFO: 41600 events read in total (3388ms).
[09:56:33.675] <TB3> INFO: Test took 4286ms.
[09:56:34.261] <TB3> INFO: Expecting 41600 events.
[09:56:38.047] <TB3> INFO: 41600 events read in total (3385ms).
[09:56:38.049] <TB3> INFO: Test took 4280ms.
[09:56:38.659] <TB3> INFO: Expecting 41600 events.
[09:56:42.429] <TB3> INFO: 41600 events read in total (3368ms).
[09:56:42.431] <TB3> INFO: Test took 4265ms.
[09:56:43.012] <TB3> INFO: Expecting 41600 events.
[09:56:46.784] <TB3> INFO: 41600 events read in total (3371ms).
[09:56:46.785] <TB3> INFO: Test took 4256ms.
[09:56:47.357] <TB3> INFO: Expecting 41600 events.
[09:56:51.165] <TB3> INFO: 41600 events read in total (3406ms).
[09:56:51.167] <TB3> INFO: Test took 4289ms.
[09:56:51.779] <TB3> INFO: Expecting 41600 events.
[09:56:55.376] <TB3> INFO: 41600 events read in total (3196ms).
[09:56:55.377] <TB3> INFO: Test took 4106ms.
[09:56:55.944] <TB3> INFO: Expecting 41600 events.
[09:56:59.298] <TB3> INFO: 41600 events read in total (2953ms).
[09:56:59.299] <TB3> INFO: Test took 3832ms.
[09:56:59.627] <TB3> INFO: enter test to run
[09:56:59.627] <TB3> INFO: test: Pretest no parameter change
[09:56:59.627] <TB3> INFO: running: pretest
[09:56:59.628] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[09:56:59.628] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[09:56:59.628] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[09:56:59.628] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[09:56:59.628] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[09:56:59.628] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[09:56:59.628] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[09:56:59.628] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[09:56:59.628] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[09:56:59.629] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[09:56:59.629] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[09:56:59.629] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[09:56:59.629] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[09:56:59.629] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[09:56:59.629] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[09:56:59.629] <TB3> INFO: write dac parameters into /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[09:56:59.629] <TB3> INFO: enter test to run
[09:56:59.629] <TB3> INFO: test: no parameter change
[09:56:59.872] <TB3> QUIET: Connection to board 121 closed.
[09:56:59.952] <TB3> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[09:57:38.109] <TB3> INFO: *** Welcome to pxar ***
[09:57:38.109] <TB3> INFO: *** Today: 2016/03/29
[09:57:38.176] <TB3> INFO: *** Version: 9751
[09:57:38.176] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//012_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//012_HREfficiency_50//dacParameters35_C15.dat
[09:57:38.177] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//012_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//012_HREfficiency_50//tbmParameters_C0b.dat
[09:57:38.177] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//012_HREfficiency_50//defaultMaskFile.dat
[09:57:38.177] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//012_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//012_HREfficiency_50//trimParameters35_C15.dat
[09:57:38.251] <TB3> INFO: clk: 4
[09:57:38.251] <TB3> INFO: ctr: 4
[09:57:38.251] <TB3> INFO: sda: 19
[09:57:38.251] <TB3> INFO: tin: 9
[09:57:38.251] <TB3> INFO: level: 15
[09:57:38.251] <TB3> INFO: triggerdelay: 0
[09:57:38.251] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[09:57:38.251] <TB3> INFO: Log level: INFO
[09:57:39.263] <TB3> INFO: Found DTB DTB_WWV6Z5
[09:57:42.281] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[09:57:42.283] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[09:57:42.285] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[09:57:43.850] <TB3> INFO: DUT info:
[09:57:43.851] <TB3> INFO: The DUT currently contains the following objects:
[09:57:43.851] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[09:57:43.851] <TB3> INFO: TBM Core alpha (0): 7 registers set
[09:57:43.851] <TB3> INFO: TBM Core beta (1): 7 registers set
[09:57:43.851] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:57:43.851] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:43.851] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:57:44.258] <TB3> INFO: enter 'restricted' command line mode
[09:57:44.258] <TB3> INFO: enter test to run
[09:57:44.258] <TB3> INFO: test: PixelAlive no parameter change
[09:57:44.258] <TB3> INFO: running: pixelalive
[09:57:44.262] <TB3> INFO: ######################################################################
[09:57:44.262] <TB3> INFO: PixTestAlive::doTest()
[09:57:44.262] <TB3> INFO: ######################################################################
[09:57:44.263] <TB3> INFO: ----------------------------------------------------------------------
[09:57:44.263] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:57:44.263] <TB3> INFO: ----------------------------------------------------------------------
[09:57:44.550] <TB3> INFO: Expecting 208000 events.
[09:57:55.681] <TB3> INFO: 208000 events read in total (10573ms).
[09:57:55.683] <TB3> INFO: Test took 11419ms.
[09:57:55.914] <TB3> INFO: PixTestAlive::aliveTest() done
[09:57:55.914] <TB3> INFO: number of dead pixels (per ROC): 0 0 1 0 0 0 1 0 0 0 0 0 0 1 0 0
[09:57:55.915] <TB3> INFO: ----------------------------------------------------------------------
[09:57:55.915] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:57:55.915] <TB3> INFO: ----------------------------------------------------------------------
[09:57:56.220] <TB3> INFO: Expecting 208000 events.
[09:58:03.580] <TB3> INFO: 208000 events read in total (6803ms).
[09:58:03.581] <TB3> INFO: Test took 7664ms.
[09:58:03.581] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[09:58:03.819] <TB3> INFO: PixTestAlive::maskTest() done
[09:58:03.819] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:58:03.820] <TB3> INFO: ----------------------------------------------------------------------
[09:58:03.820] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:58:03.820] <TB3> INFO: ----------------------------------------------------------------------
[09:58:04.083] <TB3> INFO: Expecting 208000 events.
[09:58:15.155] <TB3> INFO: 208000 events read in total (10516ms).
[09:58:15.156] <TB3> INFO: Test took 11335ms.
[09:58:15.352] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[09:58:15.352] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:58:15.352] <TB3> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[09:58:15.382] <TB3> INFO: enter test to run
[09:58:15.382] <TB3> INFO: test: delay setting parameters: ->2<-
[09:58:15.382] <TB3> INFO: delay test by 2 seconds...
[09:58:17.382] <TB3> INFO: enter test to run
[09:58:17.382] <TB3> INFO: test: HighRate no parameter change
[09:58:17.382] <TB3> INFO: running: highrate
[09:58:17.382] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//012_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//012_HREfficiency_50//phCalibrationFitErr35_C15.dat
[09:58:17.515] <TB3> INFO: ----------------------------------------------------------------------
[09:58:17.515] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[09:58:17.515] <TB3> INFO: ----------------------------------------------------------------------
[09:58:17.997] <TB3> INFO: Expecting 208000 events.
[09:58:32.291] <TB3> INFO: 208000 events read in total (13893ms).
[09:58:32.296] <TB3> INFO: Test took 14778ms.
[09:58:32.749] <TB3> INFO: number of dead pixels (per ROC): 0 0 1 0 0 0 1 0 0 0 0 0 0 1 0 0
[09:58:32.749] <TB3> INFO: number of red-efficiency pixels: 84 106 90 174 201 235 235 255 222 223 224 185 177 94 106 113
[09:58:32.749] <TB3> INFO: number of X-ray hits detected: 79561 77537 71323 126533 137885 166601 163026 158248 165375 157583 169428 147549 130364 68441 86156 84185
[09:58:32.749] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[09:58:32.749] <TB3> INFO: number of Vcal hits detected: 207915 207892 207859 207816 207795 207758 207709 207739 207767 207770 207768 207810 207822 207852 207891 207884
[09:58:32.750] <TB3> INFO: Vcal hit fiducial efficiency (%): 100.0 100.0 100.0 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 100.0 100.0 99.9
[09:58:32.750] <TB3> INFO: Vcal hit overall efficiency (%): 100.0 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9
[09:58:32.750] <TB3> INFO: X-ray hit rate [MHz/cm2]: 23.3 22.7 20.9 37.1 40.4 48.8 47.8 46.4 48.5 46.2 49.7 43.2 38.2 20.1 25.3 24.7
[09:58:32.750] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[09:58:32.775] <TB3> INFO: PixTest:: pg_setup set to default.
[09:58:32.783] <TB3> INFO: enter test to run
[09:58:32.783] <TB3> INFO: test: no parameter change
[09:58:33.060] <TB3> QUIET: Connection to board 121 closed.
[09:58:33.140] <TB3> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[09:59:08.575] <TB3> INFO: *** Welcome to pxar ***
[09:59:08.575] <TB3> INFO: *** Today: 2016/03/29
[09:59:08.638] <TB3> INFO: *** Version: 9751
[09:59:08.638] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//013_HREfficiency_75//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//013_HREfficiency_75//dacParameters35_C15.dat
[09:59:08.639] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//013_HREfficiency_75//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//013_HREfficiency_75//tbmParameters_C0b.dat
[09:59:08.639] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//013_HREfficiency_75//defaultMaskFile.dat
[09:59:08.639] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//013_HREfficiency_75//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//013_HREfficiency_75//trimParameters35_C15.dat
[09:59:08.741] <TB3> INFO: clk: 4
[09:59:08.741] <TB3> INFO: ctr: 4
[09:59:08.741] <TB3> INFO: sda: 19
[09:59:08.741] <TB3> INFO: tin: 9
[09:59:08.741] <TB3> INFO: level: 15
[09:59:08.741] <TB3> INFO: triggerdelay: 0
[09:59:08.741] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[09:59:08.741] <TB3> INFO: Log level: INFO
[09:59:09.752] <TB3> INFO: Found DTB DTB_WWV6Z5
[09:59:12.770] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[09:59:12.771] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[09:59:12.773] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[09:59:14.315] <TB3> INFO: DUT info:
[09:59:14.315] <TB3> INFO: The DUT currently contains the following objects:
[09:59:14.315] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[09:59:14.315] <TB3> INFO: TBM Core alpha (0): 7 registers set
[09:59:14.315] <TB3> INFO: TBM Core beta (1): 7 registers set
[09:59:14.315] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:59:14.315] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.315] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:59:14.716] <TB3> INFO: enter 'restricted' command line mode
[09:59:14.716] <TB3> INFO: enter test to run
[09:59:14.716] <TB3> INFO: test: PixelAlive no parameter change
[09:59:14.716] <TB3> INFO: running: pixelalive
[09:59:14.719] <TB3> INFO: ######################################################################
[09:59:14.719] <TB3> INFO: PixTestAlive::doTest()
[09:59:14.719] <TB3> INFO: ######################################################################
[09:59:14.720] <TB3> INFO: ----------------------------------------------------------------------
[09:59:14.720] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:59:14.720] <TB3> INFO: ----------------------------------------------------------------------
[09:59:14.984] <TB3> INFO: Expecting 208000 events.
[09:59:26.159] <TB3> INFO: 208000 events read in total (10617ms).
[09:59:26.160] <TB3> INFO: Test took 11439ms.
[09:59:26.382] <TB3> INFO: PixTestAlive::aliveTest() done
[09:59:26.382] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0
[09:59:26.383] <TB3> INFO: ----------------------------------------------------------------------
[09:59:26.383] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:59:26.383] <TB3> INFO: ----------------------------------------------------------------------
[09:59:26.648] <TB3> INFO: Expecting 208000 events.
[09:59:33.987] <TB3> INFO: 208000 events read in total (6782ms).
[09:59:33.987] <TB3> INFO: Test took 7602ms.
[09:59:33.987] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[09:59:34.224] <TB3> INFO: PixTestAlive::maskTest() done
[09:59:34.224] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:59:34.225] <TB3> INFO: ----------------------------------------------------------------------
[09:59:34.225] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:59:34.225] <TB3> INFO: ----------------------------------------------------------------------
[09:59:34.488] <TB3> INFO: Expecting 208000 events.
[09:59:45.866] <TB3> INFO: 208000 events read in total (10822ms).
[09:59:45.867] <TB3> INFO: Test took 11640ms.
[09:59:46.063] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[09:59:46.063] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:59:46.063] <TB3> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[09:59:46.095] <TB3> INFO: enter test to run
[09:59:46.095] <TB3> INFO: test: delay setting parameters: ->2<-
[09:59:46.095] <TB3> INFO: delay test by 2 seconds...
[09:59:48.095] <TB3> INFO: enter test to run
[09:59:48.095] <TB3> INFO: test: HighRate no parameter change
[09:59:48.096] <TB3> INFO: running: highrate
[09:59:48.096] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//013_HREfficiency_75//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//013_HREfficiency_75//phCalibrationFitErr35_C15.dat
[09:59:48.228] <TB3> INFO: ----------------------------------------------------------------------
[09:59:48.228] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[09:59:48.228] <TB3> INFO: ----------------------------------------------------------------------
[09:59:48.743] <TB3> INFO: Expecting 208000 events.
[10:00:05.145] <TB3> INFO: 208000 events read in total (16001ms).
[10:00:05.151] <TB3> INFO: Test took 16920ms.
[10:00:05.738] <TB3> INFO: number of dead pixels (per ROC): 0 0 1 0 0 0 1 0 0 0 0 0 0 1 0 0
[10:00:05.738] <TB3> INFO: number of red-efficiency pixels: 138 155 147 348 305 528 462 424 436 431 435 356 293 188 170 203
[10:00:05.738] <TB3> INFO: number of X-ray hits detected: 116606 115888 106743 185605 202953 243269 239548 230096 240941 230409 247284 215165 191741 102975 127841 124182
[10:00:05.738] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:00:05.738] <TB3> INFO: number of Vcal hits detected: 207860 207840 207797 207624 207674 207422 207452 207551 207531 207529 207522 207618 207694 207757 207825 207796
[10:00:05.738] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.8 99.9 99.7 99.8 99.8 99.8 99.8 99.8 99.8 99.9 99.9 99.9 99.9
[10:00:05.738] <TB3> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.8 99.8 99.7 99.7 99.8 99.8 99.8 99.8 99.8 99.9 99.9 99.9 99.9
[10:00:05.738] <TB3> INFO: X-ray hit rate [MHz/cm2]: 34.2 34.0 31.3 54.4 59.5 71.3 70.2 67.4 70.6 67.5 72.5 63.1 56.2 30.2 37.5 36.4
[10:00:05.738] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[10:00:05.763] <TB3> INFO: PixTest:: pg_setup set to default.
[10:00:05.772] <TB3> INFO: enter test to run
[10:00:05.772] <TB3> INFO: test: no parameter change
[10:00:06.048] <TB3> QUIET: Connection to board 121 closed.
[10:00:06.127] <TB3> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[10:00:44.689] <TB3> INFO: *** Welcome to pxar ***
[10:00:44.689] <TB3> INFO: *** Today: 2016/03/29
[10:00:44.757] <TB3> INFO: *** Version: 9751
[10:00:44.757] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//014_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//014_HREfficiency_100//dacParameters35_C15.dat
[10:00:44.757] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//014_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//014_HREfficiency_100//tbmParameters_C0b.dat
[10:00:44.757] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//014_HREfficiency_100//defaultMaskFile.dat
[10:00:44.757] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//014_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//014_HREfficiency_100//trimParameters35_C15.dat
[10:00:44.831] <TB3> INFO: clk: 4
[10:00:44.831] <TB3> INFO: ctr: 4
[10:00:44.831] <TB3> INFO: sda: 19
[10:00:44.831] <TB3> INFO: tin: 9
[10:00:44.831] <TB3> INFO: level: 15
[10:00:44.831] <TB3> INFO: triggerdelay: 0
[10:00:44.831] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:00:44.831] <TB3> INFO: Log level: INFO
[10:00:45.843] <TB3> INFO: Found DTB DTB_WWV6Z5
[10:00:48.863] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[10:00:48.865] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[10:00:48.866] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[10:00:50.410] <TB3> INFO: DUT info:
[10:00:50.410] <TB3> INFO: The DUT currently contains the following objects:
[10:00:50.410] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[10:00:50.410] <TB3> INFO: TBM Core alpha (0): 7 registers set
[10:00:50.410] <TB3> INFO: TBM Core beta (1): 7 registers set
[10:00:50.410] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:00:50.410] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.410] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.410] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.410] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.410] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.410] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.410] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.410] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.410] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.410] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.410] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.410] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.410] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.411] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.411] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.411] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:00:50.811] <TB3> INFO: enter 'restricted' command line mode
[10:00:50.811] <TB3> INFO: enter test to run
[10:00:50.811] <TB3> INFO: test: PixelAlive no parameter change
[10:00:50.811] <TB3> INFO: running: pixelalive
[10:00:50.814] <TB3> INFO: ######################################################################
[10:00:50.814] <TB3> INFO: PixTestAlive::doTest()
[10:00:50.815] <TB3> INFO: ######################################################################
[10:00:50.816] <TB3> INFO: ----------------------------------------------------------------------
[10:00:50.816] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:00:50.816] <TB3> INFO: ----------------------------------------------------------------------
[10:00:51.077] <TB3> INFO: Expecting 208000 events.
[10:01:02.200] <TB3> INFO: 208000 events read in total (10565ms).
[10:01:02.202] <TB3> INFO: Test took 11385ms.
[10:01:02.427] <TB3> INFO: PixTestAlive::aliveTest() done
[10:01:02.427] <TB3> INFO: number of dead pixels (per ROC): 0 0 1 0 0 0 1 0 0 0 0 0 0 1 0 0
[10:01:02.428] <TB3> INFO: ----------------------------------------------------------------------
[10:01:02.428] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:01:02.428] <TB3> INFO: ----------------------------------------------------------------------
[10:01:02.721] <TB3> INFO: Expecting 208000 events.
[10:01:09.946] <TB3> INFO: 208000 events read in total (6669ms).
[10:01:09.946] <TB3> INFO: Test took 7516ms.
[10:01:09.946] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:01:10.188] <TB3> INFO: PixTestAlive::maskTest() done
[10:01:10.188] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:01:10.189] <TB3> INFO: ----------------------------------------------------------------------
[10:01:10.189] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:01:10.189] <TB3> INFO: ----------------------------------------------------------------------
[10:01:10.450] <TB3> INFO: Expecting 208000 events.
[10:01:21.334] <TB3> INFO: 208000 events read in total (10328ms).
[10:01:21.334] <TB3> INFO: Test took 11143ms.
[10:01:21.527] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[10:01:21.527] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:01:21.528] <TB3> INFO: PixTestAlive::doTest() done, duration: 30 seconds
[10:01:21.559] <TB3> INFO: enter test to run
[10:01:21.559] <TB3> INFO: test: delay setting parameters: ->2<-
[10:01:21.559] <TB3> INFO: delay test by 2 seconds...
[10:01:23.559] <TB3> INFO: enter test to run
[10:01:23.559] <TB3> INFO: test: HighRate no parameter change
[10:01:23.559] <TB3> INFO: running: highrate
[10:01:23.560] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//014_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//014_HREfficiency_100//phCalibrationFitErr35_C15.dat
[10:01:23.695] <TB3> INFO: ----------------------------------------------------------------------
[10:01:23.695] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:01:23.695] <TB3> INFO: ----------------------------------------------------------------------
[10:01:24.176] <TB3> INFO: Expecting 208000 events.
[10:01:41.979] <TB3> INFO: 208000 events read in total (17401ms).
[10:01:41.986] <TB3> INFO: Test took 18289ms.
[10:01:42.719] <TB3> INFO: number of dead pixels (per ROC): 0 0 1 0 0 0 1 0 0 0 0 0 0 1 0 0
[10:01:42.719] <TB3> INFO: number of red-efficiency pixels: 208 243 284 647 567 893 895 796 819 793 792 691 535 359 329 302
[10:01:42.719] <TB3> INFO: number of X-ray hits detected: 161049 160397 148937 255898 278551 332367 328583 316470 330383 317455 338812 295604 263739 143368 177390 172885
[10:01:42.719] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:01:42.719] <TB3> INFO: number of Vcal hits detected: 207783 207747 207633 207268 207352 206917 206848 207072 207064 207062 207042 207192 207399 207536 207659 207680
[10:01:42.719] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.7 99.7 99.5 99.5 99.6 99.6 99.6 99.6 99.7 99.7 99.8 99.8 99.9
[10:01:42.719] <TB3> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.8 99.6 99.7 99.5 99.4 99.6 99.6 99.5 99.5 99.6 99.7 99.8 99.8 99.8
[10:01:42.719] <TB3> INFO: X-ray hit rate [MHz/cm2]: 47.2 47.0 43.7 75.0 81.6 97.4 96.3 92.8 96.8 93.0 99.3 86.6 77.3 42.0 52.0 50.7
[10:01:42.719] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[10:01:42.745] <TB3> INFO: PixTest:: pg_setup set to default.
[10:01:42.754] <TB3> INFO: enter test to run
[10:01:42.754] <TB3> INFO: test: no parameter change
[10:01:43.037] <TB3> QUIET: Connection to board 121 closed.
[10:01:43.117] <TB3> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[10:02:21.130] <TB3> INFO: *** Welcome to pxar ***
[10:02:21.130] <TB3> INFO: *** Today: 2016/03/29
[10:02:21.195] <TB3> INFO: *** Version: 9751
[10:02:21.195] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//015_HREfficiency_125//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//015_HREfficiency_125//dacParameters35_C15.dat
[10:02:21.196] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//015_HREfficiency_125//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//015_HREfficiency_125//tbmParameters_C0b.dat
[10:02:21.196] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//015_HREfficiency_125//defaultMaskFile.dat
[10:02:21.196] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//015_HREfficiency_125//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//015_HREfficiency_125//trimParameters35_C15.dat
[10:02:21.266] <TB3> INFO: clk: 4
[10:02:21.266] <TB3> INFO: ctr: 4
[10:02:21.266] <TB3> INFO: sda: 19
[10:02:21.266] <TB3> INFO: tin: 9
[10:02:21.266] <TB3> INFO: level: 15
[10:02:21.266] <TB3> INFO: triggerdelay: 0
[10:02:21.266] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:02:21.266] <TB3> INFO: Log level: INFO
[10:02:22.278] <TB3> INFO: Found DTB DTB_WWV6Z5
[10:02:25.296] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[10:02:25.298] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[10:02:25.300] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[10:02:26.858] <TB3> INFO: DUT info:
[10:02:26.858] <TB3> INFO: The DUT currently contains the following objects:
[10:02:26.858] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[10:02:26.858] <TB3> INFO: TBM Core alpha (0): 7 registers set
[10:02:26.858] <TB3> INFO: TBM Core beta (1): 7 registers set
[10:02:26.858] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:02:26.858] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.858] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.858] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.858] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.858] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.858] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.858] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.858] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.858] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.858] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.858] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.858] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.858] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.859] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.859] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:26.859] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:02:27.306] <TB3> INFO: enter 'restricted' command line mode
[10:02:27.306] <TB3> INFO: enter test to run
[10:02:27.306] <TB3> INFO: test: PixelAlive no parameter change
[10:02:27.306] <TB3> INFO: running: pixelalive
[10:02:27.311] <TB3> INFO: ######################################################################
[10:02:27.311] <TB3> INFO: PixTestAlive::doTest()
[10:02:27.311] <TB3> INFO: ######################################################################
[10:02:27.312] <TB3> INFO: ----------------------------------------------------------------------
[10:02:27.312] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:02:27.312] <TB3> INFO: ----------------------------------------------------------------------
[10:02:27.581] <TB3> INFO: Expecting 208000 events.
[10:02:38.574] <TB3> INFO: 208000 events read in total (10435ms).
[10:02:38.576] <TB3> INFO: Test took 11263ms.
[10:02:38.793] <TB3> INFO: PixTestAlive::aliveTest() done
[10:02:38.793] <TB3> INFO: number of dead pixels (per ROC): 0 0 1 0 0 0 1 0 0 0 0 0 0 1 0 0
[10:02:38.794] <TB3> INFO: ----------------------------------------------------------------------
[10:02:38.794] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:02:38.794] <TB3> INFO: ----------------------------------------------------------------------
[10:02:39.057] <TB3> INFO: Expecting 208000 events.
[10:02:46.468] <TB3> INFO: 208000 events read in total (6854ms).
[10:02:46.468] <TB3> INFO: Test took 7673ms.
[10:02:46.469] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:02:46.710] <TB3> INFO: PixTestAlive::maskTest() done
[10:02:46.710] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:02:46.711] <TB3> INFO: ----------------------------------------------------------------------
[10:02:46.711] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:02:46.711] <TB3> INFO: ----------------------------------------------------------------------
[10:02:46.972] <TB3> INFO: Expecting 208000 events.
[10:02:58.192] <TB3> INFO: 208000 events read in total (10664ms).
[10:02:58.193] <TB3> INFO: Test took 11480ms.
[10:02:58.388] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[10:02:58.388] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:02:58.388] <TB3> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[10:02:58.431] <TB3> INFO: enter test to run
[10:02:58.431] <TB3> INFO: test: delay setting parameters: ->2<-
[10:02:58.431] <TB3> INFO: delay test by 2 seconds...
[10:03:00.431] <TB3> INFO: enter test to run
[10:03:00.431] <TB3> INFO: test: HighRate no parameter change
[10:03:00.431] <TB3> INFO: running: highrate
[10:03:00.431] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//015_HREfficiency_125//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//015_HREfficiency_125//phCalibrationFitErr35_C15.dat
[10:03:00.578] <TB3> INFO: ----------------------------------------------------------------------
[10:03:00.578] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:03:00.578] <TB3> INFO: ----------------------------------------------------------------------
[10:03:01.060] <TB3> INFO: Expecting 208000 events.
[10:03:21.150] <TB3> INFO: 208000 events read in total (19688ms).
[10:03:21.159] <TB3> INFO: Test took 20578ms.
[10:03:22.002] <TB3> INFO: number of dead pixels (per ROC): 0 0 1 0 0 0 1 0 0 0 0 0 0 1 0 0
[10:03:22.002] <TB3> INFO: number of red-efficiency pixels: 300 373 376 969 863 1242 1287 1209 1203 1191 1236 1003 802 446 437 459
[10:03:22.002] <TB3> INFO: number of X-ray hits detected: 196465 196177 181315 311657 337796 400684 398668 382850 400031 386392 409962 359652 320165 176378 216120 211397
[10:03:22.002] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:03:22.002] <TB3> INFO: number of Vcal hits detected: 207688 207610 207504 206814 206925 206344 206185 206470 206507 206399 206375 206696 207038 207403 207530 207501
[10:03:22.002] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.9 99.8 99.8 99.5 99.6 99.3 99.3 99.3 99.4 99.3 99.3 99.4 99.6 99.8 99.8 99.8
[10:03:22.002] <TB3> INFO: Vcal hit overall efficiency (%): 99.9 99.8 99.8 99.4 99.5 99.2 99.1 99.3 99.3 99.2 99.2 99.4 99.5 99.7 99.8 99.8
[10:03:22.002] <TB3> INFO: X-ray hit rate [MHz/cm2]: 57.6 57.5 53.1 91.3 99.0 117.4 116.9 112.2 117.3 113.3 120.2 105.4 93.8 51.7 63.3 62.0
[10:03:22.002] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[10:03:22.028] <TB3> INFO: PixTest:: pg_setup set to default.
[10:03:22.038] <TB3> INFO: enter test to run
[10:03:22.038] <TB3> INFO: test: no parameter change
[10:03:22.337] <TB3> QUIET: Connection to board 121 closed.
[10:03:22.416] <TB3> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[10:03:57.829] <TB3> INFO: *** Welcome to pxar ***
[10:03:57.829] <TB3> INFO: *** Today: 2016/03/29
[10:03:57.892] <TB3> INFO: *** Version: 9751
[10:03:57.892] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//016_HREfficiency_150//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//016_HREfficiency_150//dacParameters35_C15.dat
[10:03:57.893] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//016_HREfficiency_150//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//016_HREfficiency_150//tbmParameters_C0b.dat
[10:03:57.893] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//016_HREfficiency_150//defaultMaskFile.dat
[10:03:57.893] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//016_HREfficiency_150//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//016_HREfficiency_150//trimParameters35_C15.dat
[10:03:57.966] <TB3> INFO: clk: 4
[10:03:57.966] <TB3> INFO: ctr: 4
[10:03:57.966] <TB3> INFO: sda: 19
[10:03:57.966] <TB3> INFO: tin: 9
[10:03:57.966] <TB3> INFO: level: 15
[10:03:57.966] <TB3> INFO: triggerdelay: 0
[10:03:57.966] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:03:57.966] <TB3> INFO: Log level: INFO
[10:03:58.980] <TB3> INFO: Found DTB DTB_WWV6Z5
[10:04:01.998] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[10:04:01.999] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[10:04:02.001] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[10:04:03.545] <TB3> INFO: DUT info:
[10:04:03.545] <TB3> INFO: The DUT currently contains the following objects:
[10:04:03.545] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[10:04:03.545] <TB3> INFO: TBM Core alpha (0): 7 registers set
[10:04:03.545] <TB3> INFO: TBM Core beta (1): 7 registers set
[10:04:03.545] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:04:03.545] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.545] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:04:03.946] <TB3> INFO: enter 'restricted' command line mode
[10:04:03.946] <TB3> INFO: enter test to run
[10:04:03.946] <TB3> INFO: test: PixelAlive no parameter change
[10:04:03.946] <TB3> INFO: running: pixelalive
[10:04:03.950] <TB3> INFO: ######################################################################
[10:04:03.950] <TB3> INFO: PixTestAlive::doTest()
[10:04:03.950] <TB3> INFO: ######################################################################
[10:04:03.951] <TB3> INFO: ----------------------------------------------------------------------
[10:04:03.951] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:04:03.951] <TB3> INFO: ----------------------------------------------------------------------
[10:04:04.214] <TB3> INFO: Expecting 208000 events.
[10:04:15.273] <TB3> INFO: 208000 events read in total (10502ms).
[10:04:15.274] <TB3> INFO: Test took 11322ms.
[10:04:15.494] <TB3> INFO: PixTestAlive::aliveTest() done
[10:04:15.494] <TB3> INFO: number of dead pixels (per ROC): 0 0 1 0 0 0 1 0 0 0 0 0 0 1 0 0
[10:04:15.496] <TB3> INFO: ----------------------------------------------------------------------
[10:04:15.496] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:04:15.496] <TB3> INFO: ----------------------------------------------------------------------
[10:04:15.756] <TB3> INFO: Expecting 208000 events.
[10:04:23.130] <TB3> INFO: 208000 events read in total (6818ms).
[10:04:23.131] <TB3> INFO: Test took 7634ms.
[10:04:23.132] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:04:23.372] <TB3> INFO: PixTestAlive::maskTest() done
[10:04:23.372] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:04:23.373] <TB3> INFO: ----------------------------------------------------------------------
[10:04:23.373] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:04:23.373] <TB3> INFO: ----------------------------------------------------------------------
[10:04:23.634] <TB3> INFO: Expecting 208000 events.
[10:04:34.780] <TB3> INFO: 208000 events read in total (10589ms).
[10:04:34.780] <TB3> INFO: Test took 11405ms.
[10:04:34.977] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[10:04:34.977] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:04:34.977] <TB3> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[10:04:35.008] <TB3> INFO: enter test to run
[10:04:35.009] <TB3> INFO: test: delay setting parameters: ->2<-
[10:04:35.009] <TB3> INFO: delay test by 2 seconds...
[10:04:37.009] <TB3> INFO: enter test to run
[10:04:37.009] <TB3> INFO: test: HighRate no parameter change
[10:04:37.009] <TB3> INFO: running: highrate
[10:04:37.009] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//016_HREfficiency_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//016_HREfficiency_150//phCalibrationFitErr35_C15.dat
[10:04:37.148] <TB3> INFO: ----------------------------------------------------------------------
[10:04:37.148] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:04:37.148] <TB3> INFO: ----------------------------------------------------------------------
[10:04:37.631] <TB3> INFO: Expecting 208000 events.
[10:04:58.760] <TB3> INFO: 208000 events read in total (20727ms).
[10:04:58.770] <TB3> INFO: Test took 21619ms.
[10:04:59.737] <TB3> INFO: number of dead pixels (per ROC): 0 0 1 0 0 0 1 0 0 0 0 0 0 1 0 0
[10:04:59.737] <TB3> INFO: number of red-efficiency pixels: 394 542 468 1434 1277 1813 1750 1769 1689 1664 1676 1438 1182 622 673 615
[10:04:59.737] <TB3> INFO: number of X-ray hits detected: 234718 234211 217764 369103 401761 474218 473101 455474 476689 459488 485984 427675 380505 211683 258389 251265
[10:04:59.737] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:04:59.737] <TB3> INFO: number of Vcal hits detected: 207587 207398 207318 206030 206234 205157 205166 205542 205606 205446 205449 205868 206461 207138 207251 207314
[10:04:59.737] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.8 99.7 99.8 99.2 99.3 98.8 98.9 98.9 98.9 98.9 99.0 99.1 99.3 99.7 99.7 99.7
[10:04:59.737] <TB3> INFO: Vcal hit overall efficiency (%): 99.8 99.7 99.7 99.1 99.2 98.6 98.6 98.8 98.8 98.8 98.8 99.0 99.3 99.6 99.6 99.7
[10:04:59.737] <TB3> INFO: X-ray hit rate [MHz/cm2]: 68.8 68.6 63.8 108.2 117.8 139.0 138.7 133.5 139.7 134.7 142.4 125.4 111.5 62.0 75.7 73.6
[10:04:59.737] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[10:04:59.762] <TB3> INFO: PixTest:: pg_setup set to default.
[10:04:59.772] <TB3> INFO: enter test to run
[10:04:59.772] <TB3> INFO: test: no parameter change
[10:05:00.103] <TB3> QUIET: Connection to board 121 closed.
[10:05:00.183] <TB3> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[10:05:34.806] <TB3> INFO: *** Welcome to pxar ***
[10:05:34.806] <TB3> INFO: *** Today: 2016/03/29
[10:05:34.871] <TB3> INFO: *** Version: 9751
[10:05:34.871] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//017_HREfficiency_200//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//017_HREfficiency_200//dacParameters35_C15.dat
[10:05:34.872] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//017_HREfficiency_200//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//017_HREfficiency_200//tbmParameters_C0b.dat
[10:05:34.872] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//017_HREfficiency_200//defaultMaskFile.dat
[10:05:34.872] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//017_HREfficiency_200//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//017_HREfficiency_200//trimParameters35_C15.dat
[10:05:34.944] <TB3> INFO: clk: 4
[10:05:34.944] <TB3> INFO: ctr: 4
[10:05:34.944] <TB3> INFO: sda: 19
[10:05:34.944] <TB3> INFO: tin: 9
[10:05:34.944] <TB3> INFO: level: 15
[10:05:34.944] <TB3> INFO: triggerdelay: 0
[10:05:34.944] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:05:34.944] <TB3> INFO: Log level: INFO
[10:05:35.957] <TB3> INFO: Found DTB DTB_WWV6Z5
[10:05:38.974] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[10:05:38.976] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[10:05:38.978] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[10:05:40.540] <TB3> INFO: DUT info:
[10:05:40.540] <TB3> INFO: The DUT currently contains the following objects:
[10:05:40.540] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[10:05:40.540] <TB3> INFO: TBM Core alpha (0): 7 registers set
[10:05:40.540] <TB3> INFO: TBM Core beta (1): 7 registers set
[10:05:40.540] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:05:40.540] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.540] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.540] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.540] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.540] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.540] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.540] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.540] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.540] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.540] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.540] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.540] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.541] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.541] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.541] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.541] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:05:40.942] <TB3> INFO: enter 'restricted' command line mode
[10:05:40.942] <TB3> INFO: enter test to run
[10:05:40.942] <TB3> INFO: test: PixelAlive no parameter change
[10:05:40.942] <TB3> INFO: running: pixelalive
[10:05:40.946] <TB3> INFO: ######################################################################
[10:05:40.946] <TB3> INFO: PixTestAlive::doTest()
[10:05:40.946] <TB3> INFO: ######################################################################
[10:05:40.947] <TB3> INFO: ----------------------------------------------------------------------
[10:05:40.947] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:05:40.947] <TB3> INFO: ----------------------------------------------------------------------
[10:05:41.243] <TB3> INFO: Expecting 208000 events.
[10:05:52.460] <TB3> INFO: 208000 events read in total (10659ms).
[10:05:52.462] <TB3> INFO: Test took 11514ms.
[10:05:52.682] <TB3> INFO: PixTestAlive::aliveTest() done
[10:05:52.682] <TB3> INFO: number of dead pixels (per ROC): 0 0 1 0 0 0 1 0 0 0 0 0 0 1 0 0
[10:05:52.683] <TB3> INFO: ----------------------------------------------------------------------
[10:05:52.683] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:05:52.683] <TB3> INFO: ----------------------------------------------------------------------
[10:05:52.942] <TB3> INFO: Expecting 208000 events.
[10:06:00.258] <TB3> INFO: 208000 events read in total (6759ms).
[10:06:00.259] <TB3> INFO: Test took 7575ms.
[10:06:00.259] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:06:00.499] <TB3> INFO: PixTestAlive::maskTest() done
[10:06:00.499] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:06:00.500] <TB3> INFO: ----------------------------------------------------------------------
[10:06:00.500] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:06:00.500] <TB3> INFO: ----------------------------------------------------------------------
[10:06:00.761] <TB3> INFO: Expecting 208000 events.
[10:06:11.652] <TB3> INFO: 208000 events read in total (10335ms).
[10:06:11.653] <TB3> INFO: Test took 11151ms.
[10:06:11.850] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[10:06:11.850] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:06:11.850] <TB3> INFO: PixTestAlive::doTest() done, duration: 30 seconds
[10:06:11.883] <TB3> INFO: enter test to run
[10:06:11.883] <TB3> INFO: test: delay setting parameters: ->2<-
[10:06:11.883] <TB3> INFO: delay test by 2 seconds...
[10:06:13.883] <TB3> INFO: enter test to run
[10:06:13.883] <TB3> INFO: test: HighRate no parameter change
[10:06:13.883] <TB3> INFO: running: highrate
[10:06:13.883] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//017_HREfficiency_200//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//017_HREfficiency_200//phCalibrationFitErr35_C15.dat
[10:06:14.017] <TB3> INFO: ----------------------------------------------------------------------
[10:06:14.017] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:06:14.017] <TB3> INFO: ----------------------------------------------------------------------
[10:06:14.501] <TB3> INFO: Expecting 208000 events.
[10:06:40.649] <TB3> INFO: 208000 events read in total (25747ms).
[10:06:40.664] <TB3> INFO: Test took 26644ms.
[10:06:41.920] <TB3> INFO: number of dead pixels (per ROC): 0 0 1 0 0 0 1 0 0 0 0 0 0 1 0 0
[10:06:41.920] <TB3> INFO: number of red-efficiency pixels: 789 995 853 2373 2198 2903 2847 2876 2930 2732 2829 2406 2051 1066 1324 1228
[10:06:41.920] <TB3> INFO: number of X-ray hits detected: 320763 319005 297656 499870 543039 640172 639941 616315 642887 618020 654609 575464 516601 291815 352391 341036
[10:06:41.920] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:06:41.920] <TB3> INFO: number of Vcal hits detected: 207096 206808 206513 203611 203931 201341 201067 202283 202084 201998 201612 203216 204579 206052 206320 206471
[10:06:41.920] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.6 99.5 99.5 98.1 98.3 97.2 97.2 97.5 97.4 97.5 97.3 98.0 98.6 99.3 99.2 99.3
[10:06:41.920] <TB3> INFO: Vcal hit overall efficiency (%): 99.6 99.4 99.3 97.9 98.0 96.8 96.7 97.3 97.2 97.1 96.9 97.7 98.4 99.1 99.2 99.3
[10:06:41.920] <TB3> INFO: X-ray hit rate [MHz/cm2]: 94.0 93.5 87.2 146.5 159.2 187.6 187.6 180.6 188.4 181.1 191.9 168.7 151.4 85.5 103.3 100.0
[10:06:41.920] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[10:06:41.946] <TB3> INFO: PixTest:: pg_setup set to default.
[10:06:41.957] <TB3> INFO: enter test to run
[10:06:41.957] <TB3> INFO: test: no parameter change
[10:06:42.235] <TB3> QUIET: Connection to board 121 closed.
[10:06:42.314] <TB3> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[10:07:18.239] <TB3> INFO: *** Welcome to pxar ***
[10:07:18.239] <TB3> INFO: *** Today: 2016/03/29
[10:07:18.301] <TB3> INFO: *** Version: 9751
[10:07:18.301] <TB3> INFO: readRocDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//018_HREfficiency_250//dacParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//018_HREfficiency_250//dacParameters35_C15.dat
[10:07:18.302] <TB3> INFO: readTbmDacs: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//018_HREfficiency_250//tbmParameters_C0a.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//018_HREfficiency_250//tbmParameters_C0b.dat
[10:07:18.302] <TB3> INFO: readMaskFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//018_HREfficiency_250//defaultMaskFile.dat
[10:07:18.302] <TB3> INFO: readTrimFile: /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//018_HREfficiency_250//trimParameters35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//018_HREfficiency_250//trimParameters35_C15.dat
[10:07:18.404] <TB3> INFO: clk: 4
[10:07:18.404] <TB3> INFO: ctr: 4
[10:07:18.404] <TB3> INFO: sda: 19
[10:07:18.404] <TB3> INFO: tin: 9
[10:07:18.404] <TB3> INFO: level: 15
[10:07:18.404] <TB3> INFO: triggerdelay: 0
[10:07:18.404] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:07:18.404] <TB3> INFO: Log level: INFO
[10:07:19.416] <TB3> INFO: Found DTB DTB_WWV6Z5
[10:07:22.434] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[10:07:22.436] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[10:07:22.438] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[10:07:23.972] <TB3> INFO: DUT info:
[10:07:23.972] <TB3> INFO: The DUT currently contains the following objects:
[10:07:23.972] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[10:07:23.972] <TB3> INFO: TBM Core alpha (0): 7 registers set
[10:07:23.972] <TB3> INFO: TBM Core beta (1): 7 registers set
[10:07:23.972] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:07:23.972] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.972] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.972] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.972] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.972] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.972] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.973] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.973] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.973] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.973] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.973] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.973] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.973] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.973] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.973] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:23.973] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:07:24.373] <TB3> INFO: enter 'restricted' command line mode
[10:07:24.373] <TB3> INFO: enter test to run
[10:07:24.373] <TB3> INFO: test: PixelAlive no parameter change
[10:07:24.373] <TB3> INFO: running: pixelalive
[10:07:24.376] <TB3> INFO: ######################################################################
[10:07:24.376] <TB3> INFO: PixTestAlive::doTest()
[10:07:24.377] <TB3> INFO: ######################################################################
[10:07:24.378] <TB3> INFO: ----------------------------------------------------------------------
[10:07:24.378] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:07:24.378] <TB3> INFO: ----------------------------------------------------------------------
[10:07:24.641] <TB3> INFO: Expecting 208000 events.
[10:07:35.670] <TB3> INFO: 208000 events read in total (10471ms).
[10:07:35.671] <TB3> INFO: Test took 11292ms.
[10:07:35.894] <TB3> INFO: PixTestAlive::aliveTest() done
[10:07:35.894] <TB3> INFO: number of dead pixels (per ROC): 0 0 1 0 0 0 1 0 0 0 0 0 0 1 0 0
[10:07:35.895] <TB3> INFO: ----------------------------------------------------------------------
[10:07:35.895] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:07:35.895] <TB3> INFO: ----------------------------------------------------------------------
[10:07:36.161] <TB3> INFO: Expecting 208000 events.
[10:07:43.628] <TB3> INFO: 208000 events read in total (6911ms).
[10:07:43.628] <TB3> INFO: Test took 7731ms.
[10:07:43.629] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:07:43.869] <TB3> INFO: PixTestAlive::maskTest() done
[10:07:43.869] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:07:43.870] <TB3> INFO: ----------------------------------------------------------------------
[10:07:43.870] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:07:43.870] <TB3> INFO: ----------------------------------------------------------------------
[10:07:44.139] <TB3> INFO: Expecting 208000 events.
[10:07:55.332] <TB3> INFO: 208000 events read in total (10637ms).
[10:07:55.332] <TB3> INFO: Test took 11460ms.
[10:07:55.528] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[10:07:55.528] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:07:55.528] <TB3> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[10:07:55.558] <TB3> INFO: enter test to run
[10:07:55.558] <TB3> INFO: test: delay setting parameters: ->2<-
[10:07:55.558] <TB3> INFO: delay test by 2 seconds...
[10:07:57.558] <TB3> INFO: enter test to run
[10:07:57.558] <TB3> INFO: test: HighRate no parameter change
[10:07:57.558] <TB3> INFO: running: highrate
[10:07:57.559] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//018_HREfficiency_250//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2190_XrayQualification_2016-03-29_10h42m_1459240967//018_HREfficiency_250//phCalibrationFitErr35_C15.dat
[10:07:57.719] <TB3> INFO: ----------------------------------------------------------------------
[10:07:57.719] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:07:57.719] <TB3> INFO: ----------------------------------------------------------------------
[10:07:58.219] <TB3> INFO: Expecting 208000 events.
[10:08:29.328] <TB3> INFO: 208000 events read in total (30708ms).
[10:08:29.346] <TB3> INFO: Test took 31625ms.
[10:08:30.834] <TB3> INFO: number of dead pixels (per ROC): 0 0 1 0 0 0 1 0 0 0 0 0 0 1 0 0
[10:08:30.834] <TB3> INFO: number of red-efficiency pixels: 1191 1513 1174 3186 2926 3628 3618 3649 3639 3470 3660 3200 2954 1437 1957 1828
[10:08:30.834] <TB3> INFO: number of X-ray hits detected: 396602 393914 369590 617049 664792 782885 788998 754641 784867 761020 803712 707310 636984 359173 437328 421765
[10:08:30.834] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:08:30.834] <TB3> INFO: number of Vcal hits detected: 206538 205990 205328 199852 200676 196032 195194 197507 197217 196751 196041 199084 201291 204669 205066 205307
[10:08:30.834] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.4 99.1 99.0 96.6 97.0 95.0 94.7 95.5 95.3 95.3 95.0 96.3 97.2 98.7 98.7 98.8
[10:08:30.834] <TB3> INFO: Vcal hit overall efficiency (%): 99.3 99.0 98.7 96.1 96.5 94.2 93.8 95.0 94.8 94.6 94.3 95.7 96.8 98.4 98.6 98.7
[10:08:30.834] <TB3> INFO: X-ray hit rate [MHz/cm2]: 116.2 115.5 108.3 180.9 194.9 229.5 231.3 221.2 230.1 223.1 235.6 207.3 186.7 105.3 128.2 123.6
[10:08:30.834] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[10:08:30.859] <TB3> INFO: PixTest:: pg_setup set to default.
[10:08:30.871] <TB3> INFO: enter test to run
[10:08:30.871] <TB3> INFO: test: no parameter change
[10:08:31.168] <TB3> QUIET: Connection to board 121 closed.
[10:08:31.248] <TB3> INFO: pXar: this is the end, my friend