[10:36:31.842] <TB2> INFO: *** Welcome to pxar ***
[10:36:31.842] <TB2> INFO: *** Today: 2016/02/09
[10:36:31.964] <TB2> INFO: *** Version: 9751
[10:36:31.964] <TB2> INFO: readRocDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//000_PixelAlive_p17//dacParameters35_C15.dat
[10:36:31.965] <TB2> INFO: readTbmDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//000_PixelAlive_p17//tbmParameters_C0b.dat
[10:36:31.965] <TB2> INFO: readMaskFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//000_PixelAlive_p17//defaultMaskFile.dat
[10:36:31.965] <TB2> INFO: readTrimFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//000_PixelAlive_p17//trimParameters35_C15.dat
[10:36:32.039] <TB2> INFO: clk: 4
[10:36:32.039] <TB2> INFO: ctr: 4
[10:36:32.039] <TB2> INFO: sda: 19
[10:36:32.040] <TB2> INFO: tin: 9
[10:36:32.040] <TB2> INFO: level: 15
[10:36:32.040] <TB2> INFO: triggerdelay: 0
[10:36:32.040] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:36:32.040] <TB2> INFO: Log level: INFO
[10:36:32.051] <TB2> INFO: Found DTB DTB_WXENWR
[10:36:32.063] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:36:32.065] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:36:32.067] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[10:36:33.611] <TB2> INFO: DUT info:
[10:36:33.611] <TB2> INFO: The DUT currently contains the following objects:
[10:36:33.611] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:36:33.611] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:36:33.611] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:36:33.611] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:36:33.611] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.611] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.611] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.612] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.612] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.612] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.612] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.612] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.612] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.612] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.612] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.612] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.612] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.612] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.612] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:33.612] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:34.013] <TB2> INFO: enter 'restricted' command line mode
[10:36:34.013] <TB2> INFO: enter test to run
[10:36:34.013] <TB2> INFO: test: PixelAlive no parameter change
[10:36:34.013] <TB2> INFO: running: pixelalive
[10:36:34.019] <TB2> INFO: ######################################################################
[10:36:34.019] <TB2> INFO: PixTestAlive::doTest()
[10:36:34.019] <TB2> INFO: ######################################################################
[10:36:34.020] <TB2> INFO: ----------------------------------------------------------------------
[10:36:34.020] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:36:34.020] <TB2> INFO: ----------------------------------------------------------------------
[10:36:34.301] <TB2> INFO: Expecting 41600 events.
[10:36:38.036] <TB2> INFO: 41600 events read in total (3176ms).
[10:36:38.085] <TB2> INFO: Test took 4061ms.
[10:36:38.321] <TB2> INFO: PixTestAlive::aliveTest() done
[10:36:38.321] <TB2> INFO: number of dead pixels (per ROC): 3 0 0 1 0 0 0 0 0 1 0 1 0 0 0 1
[10:36:38.323] <TB2> INFO: ----------------------------------------------------------------------
[10:36:38.323] <TB2> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:36:38.323] <TB2> INFO: ----------------------------------------------------------------------
[10:36:38.581] <TB2> INFO: Expecting 41600 events.
[10:36:41.511] <TB2> INFO: 41600 events read in total (2373ms).
[10:36:41.512] <TB2> INFO: Test took 3187ms.
[10:36:41.518] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:36:41.774] <TB2> INFO: PixTestAlive::maskTest() done
[10:36:41.774] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:36:41.776] <TB2> INFO: ----------------------------------------------------------------------
[10:36:41.776] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:36:41.776] <TB2> INFO: ----------------------------------------------------------------------
[10:36:42.050] <TB2> INFO: Expecting 41600 events.
[10:36:45.792] <TB2> INFO: 41600 events read in total (3185ms).
[10:36:45.793] <TB2> INFO: Test took 4015ms.
[10:36:46.039] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[10:36:46.039] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:36:46.039] <TB2> INFO: PixTestAlive::doTest() done, duration: 12 seconds
[10:36:46.097] <TB2> INFO: enter test to run
[10:36:46.097] <TB2> INFO: test: no parameter change
[10:36:46.223] <TB2> QUIET: Connection to board 162 closed.
[10:36:46.303] <TB2> INFO: pXar: this is the end, my friend

[10:41:56.034] <TB2> INFO: *** Welcome to pxar ***
[10:41:56.034] <TB2> INFO: *** Today: 2016/02/09
[10:41:56.108] <TB2> INFO: *** Version: 9751
[10:41:56.108] <TB2> INFO: readRocDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//dacParameters35_C15.dat
[10:41:56.109] <TB2> INFO: readTbmDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[10:41:56.109] <TB2> INFO: readMaskFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//defaultMaskFile.dat
[10:41:56.109] <TB2> INFO: readTrimFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C15.dat
[10:41:56.178] <TB2> INFO: clk: 4
[10:41:56.178] <TB2> INFO: ctr: 4
[10:41:56.178] <TB2> INFO: sda: 19
[10:41:56.178] <TB2> INFO: tin: 9
[10:41:56.178] <TB2> INFO: level: 15
[10:41:56.178] <TB2> INFO: triggerdelay: 0
[10:41:56.178] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:41:56.178] <TB2> INFO: Log level: INFO
[10:41:56.192] <TB2> INFO: Found DTB DTB_WXENWR
[10:41:56.206] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:41:56.208] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:41:56.210] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[10:41:57.753] <TB2> INFO: DUT info:
[10:41:57.753] <TB2> INFO: The DUT currently contains the following objects:
[10:41:57.753] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:41:57.753] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:41:57.753] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:41:57.753] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:41:57.753] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:57.753] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:58.154] <TB2> INFO: enter 'restricted' command line mode
[10:41:58.154] <TB2> INFO: enter test to run
[10:41:58.154] <TB2> INFO: test: delay setting parameters: ->5<-
[10:41:58.154] <TB2> INFO: delay test by 5 seconds...
[10:42:03.154] <TB2> INFO: enter test to run
[10:42:03.154] <TB2> INFO: test: highrate no parameter change
[10:42:03.154] <TB2> INFO: running: highrate
[10:42:03.154] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[10:42:03.300] <TB2> INFO: ----------------------------------------------------------------------
[10:42:03.300] <TB2> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[10:42:03.300] <TB2> INFO: ----------------------------------------------------------------------
[10:42:03.300] <TB2> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[10:42:03.300] <TB2> INFO: edge/corner pixel THR is adjusted
[10:42:03.300] <TB2> INFO: PixTestHighRate::trimHotPixels: step 0...
[10:42:04.021] <TB2> INFO: Collecting data for 1 seconds...
[10:42:05.022] <TB2> INFO: Done with hot pixel readout
[10:42:12.479] <TB2> INFO: PixTest:: pg_setup set to default.
[10:42:12.480] <TB2> INFO: 3 hot pixels found in step 0
[10:42:13.205] <TB2> INFO: Collecting data for 1 seconds...
[10:42:14.206] <TB2> INFO: Done with hot pixel readout
[10:42:21.754] <TB2> INFO: PixTest:: pg_setup set to default.
[10:42:21.754] <TB2> INFO: 3 hot pixels found in step 1
[10:42:22.483] <TB2> INFO: Collecting data for 1 seconds...
[10:42:23.484] <TB2> INFO: Done with hot pixel readout
[10:42:30.885] <TB2> INFO: PixTest:: pg_setup set to default.
[10:42:30.886] <TB2> INFO: 2 hot pixels found in step 2
[10:42:31.611] <TB2> INFO: Collecting data for 1 seconds...
[10:42:32.612] <TB2> INFO: Done with hot pixel readout
[10:42:40.237] <TB2> INFO: PixTest:: pg_setup set to default.
[10:42:40.238] <TB2> INFO: 0 hot pixels found in step 3
[10:42:40.247] <TB2> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[10:42:40.274] <TB2> INFO: PixTest::trimHotPixels() done
[10:42:40.274] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C0.dat
[10:42:40.280] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C1.dat
[10:42:40.287] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C2.dat
[10:42:40.293] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C3.dat
[10:42:40.299] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C4.dat
[10:42:40.305] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C5.dat
[10:42:40.312] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C6.dat
[10:42:40.318] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C7.dat
[10:42:40.324] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C8.dat
[10:42:40.331] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C9.dat
[10:42:40.337] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C10.dat
[10:42:40.343] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C11.dat
[10:42:40.349] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C12.dat
[10:42:40.356] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C13.dat
[10:42:40.362] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C14.dat
[10:42:40.368] <TB2> INFO: write trim parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C15.dat
[10:42:40.374] <TB2> INFO: write masked pixels into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//defaultMaskFile.dat
[10:42:40.407] <TB2> INFO: enter test to run
[10:42:40.407] <TB2> INFO: test: no parameter change
[10:42:40.573] <TB2> QUIET: Connection to board 162 closed.
[10:42:40.653] <TB2> INFO: pXar: this is the end, my friend

[10:43:14.274] <TB2> INFO: *** Welcome to pxar ***
[10:43:14.274] <TB2> INFO: *** Today: 2016/02/09
[10:43:14.337] <TB2> INFO: *** Version: 9751
[10:43:14.337] <TB2> INFO: readRocDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//dacParameters35_C15.dat
[10:43:14.338] <TB2> INFO: readTbmDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//tbmParameters_C0b.dat
[10:43:14.338] <TB2> INFO: readMaskFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//defaultMaskFile.dat
[10:43:14.338] <TB2> INFO: readTrimFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//trimParameters35_C15.dat
[10:43:14.431] <TB2> INFO: clk: 4
[10:43:14.431] <TB2> INFO: ctr: 4
[10:43:14.431] <TB2> INFO: sda: 19
[10:43:14.431] <TB2> INFO: tin: 9
[10:43:14.431] <TB2> INFO: level: 15
[10:43:14.431] <TB2> INFO: triggerdelay: 0
[10:43:14.431] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:43:14.431] <TB2> INFO: Log level: INFO
[10:43:14.444] <TB2> INFO: Found DTB DTB_WXENWR
[10:43:14.457] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:43:14.459] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:43:14.461] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[10:43:16.011] <TB2> INFO: DUT info:
[10:43:16.011] <TB2> INFO: The DUT currently contains the following objects:
[10:43:16.011] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:43:16.011] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:43:16.011] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:43:16.011] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:43:16.011] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.011] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.011] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.012] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.012] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.012] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.012] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.012] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.012] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.012] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.012] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.012] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.012] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.012] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.012] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.012] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:16.413] <TB2> INFO: enter 'restricted' command line mode
[10:43:16.413] <TB2> INFO: enter test to run
[10:43:16.413] <TB2> INFO: test: delay setting parameters: ->5<-
[10:43:16.413] <TB2> INFO: delay test by 5 seconds...
[10:43:21.413] <TB2> INFO: enter test to run
[10:43:21.413] <TB2> INFO: test: Xray no parameter change
[10:43:21.413] <TB2> INFO: running: xray
[10:43:21.413] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//phCalibrationFitErr35_C15.dat
[10:43:21.602] <TB2> INFO: ######################################################################
[10:43:21.602] <TB2> INFO: PixTestXray::doTest()
[10:43:21.602] <TB2> INFO: ######################################################################
[10:43:21.602] <TB2> INFO: ----------------------------------------------------------------------
[10:43:21.602] <TB2> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[10:43:21.602] <TB2> INFO: ----------------------------------------------------------------------
[10:43:22.330] <TB2> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[10:43:28.516] <TB2> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[10:43:57.388] <TB2> INFO: Resuming triggers.
[10:44:03.593] <TB2> INFO: run duration 12 seconds, buffer almost full (81%), pausing triggers.
[10:44:32.044] <TB2> INFO: Resuming triggers.
[10:44:38.252] <TB2> INFO: run duration 18 seconds, buffer almost full (81%), pausing triggers.
[10:45:06.917] <TB2> INFO: Resuming triggers.
[10:45:13.124] <TB2> INFO: run duration 24 seconds, buffer almost full (81%), pausing triggers.
[10:45:41.467] <TB2> INFO: Resuming triggers.
[10:45:47.671] <TB2> INFO: run duration 30 seconds, buffer almost full (81%), pausing triggers.
[10:46:16.116] <TB2> INFO: Resuming triggers.
[10:46:22.321] <TB2> INFO: run duration 37 seconds, buffer almost full (81%), pausing triggers.
[10:46:50.223] <TB2> INFO: Resuming triggers.
[10:46:56.423] <TB2> INFO: run duration 43 seconds, buffer almost full (81%), pausing triggers.
[10:47:24.957] <TB2> INFO: Resuming triggers.
[10:47:31.156] <TB2> INFO: run duration 49 seconds, buffer almost full (81%), pausing triggers.
[10:47:59.292] <TB2> INFO: Resuming triggers.
[10:48:05.494] <TB2> INFO: run duration 55 seconds, buffer almost full (81%), pausing triggers.
[10:48:34.294] <TB2> INFO: Resuming triggers.
[10:48:40.490] <TB2> INFO: run duration 61 seconds, buffer almost full (81%), pausing triggers.
[10:49:09.177] <TB2> INFO: Resuming triggers.
[10:49:15.377] <TB2> INFO: run duration 68 seconds, buffer almost full (81%), pausing triggers.
[10:49:43.810] <TB2> INFO: Resuming triggers.
[10:49:50.003] <TB2> INFO: run duration 74 seconds, buffer almost full (81%), pausing triggers.
[10:50:18.088] <TB2> INFO: Resuming triggers.
[10:50:24.287] <TB2> INFO: run duration 80 seconds, buffer almost full (81%), pausing triggers.
[10:50:53.175] <TB2> INFO: Resuming triggers.
[10:50:59.366] <TB2> INFO: run duration 86 seconds, buffer almost full (81%), pausing triggers.
[10:51:29.026] <TB2> INFO: Resuming triggers.
[10:51:35.212] <TB2> INFO: run duration 92 seconds, buffer almost full (81%), pausing triggers.
[10:52:03.199] <TB2> INFO: Resuming triggers.
[10:52:09.389] <TB2> INFO: run duration 99 seconds, buffer almost full (81%), pausing triggers.
[10:52:39.084] <TB2> INFO: Resuming triggers.
[10:52:39.968] <TB2> INFO: data taking finished, elapsed time: 100 seconds.
[10:52:44.359] <TB2> INFO: PixTest:: pg_setup set to default.
[10:52:44.360] <TB2> INFO: PixTestXray::doPhRun() done
[10:52:44.369] <TB2> INFO: PixTestXray::doTest() done
[10:52:44.545] <TB2> INFO: enter test to run
[10:52:44.545] <TB2> INFO: test: no parameter change
[10:52:44.751] <TB2> QUIET: Connection to board 162 closed.
[10:52:44.831] <TB2> INFO: pXar: this is the end, my friend

[10:53:23.521] <TB2> INFO: *** Welcome to pxar ***
[10:53:23.521] <TB2> INFO: *** Today: 2016/02/09
[10:53:23.595] <TB2> INFO: *** Version: 9751
[10:53:23.595] <TB2> INFO: readRocDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//dacParameters35_C15.dat
[10:53:23.596] <TB2> INFO: readTbmDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//tbmParameters_C0b.dat
[10:53:23.596] <TB2> INFO: readMaskFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//defaultMaskFile.dat
[10:53:23.596] <TB2> INFO: readTrimFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//trimParameters35_C15.dat
[10:53:23.682] <TB2> INFO: clk: 4
[10:53:23.682] <TB2> INFO: ctr: 4
[10:53:23.682] <TB2> INFO: sda: 19
[10:53:23.682] <TB2> INFO: tin: 9
[10:53:23.682] <TB2> INFO: level: 15
[10:53:23.682] <TB2> INFO: triggerdelay: 0
[10:53:23.682] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:53:23.682] <TB2> INFO: Log level: INFO
[10:53:23.694] <TB2> INFO: Found DTB DTB_WXENWR
[10:53:23.705] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:53:23.707] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:53:23.709] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[10:53:25.249] <TB2> INFO: DUT info:
[10:53:25.249] <TB2> INFO: The DUT currently contains the following objects:
[10:53:25.249] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:53:25.249] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:53:25.249] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:53:25.249] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:53:25.249] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.249] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:25.650] <TB2> INFO: enter 'restricted' command line mode
[10:53:25.650] <TB2> INFO: enter test to run
[10:53:25.650] <TB2> INFO: test: delay setting parameters: ->5<-
[10:53:25.650] <TB2> INFO: delay test by 5 seconds...
[10:53:30.650] <TB2> INFO: enter test to run
[10:53:30.650] <TB2> INFO: test: Xray no parameter change
[10:53:30.651] <TB2> INFO: running: xray
[10:53:30.651] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//phCalibrationFitErr35_C15.dat
[10:53:30.817] <TB2> INFO: ######################################################################
[10:53:30.817] <TB2> INFO: PixTestXray::doTest()
[10:53:30.817] <TB2> INFO: ######################################################################
[10:53:30.817] <TB2> INFO: ----------------------------------------------------------------------
[10:53:30.817] <TB2> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[10:53:30.817] <TB2> INFO: ----------------------------------------------------------------------
[10:53:31.547] <TB2> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[10:53:34.832] <TB2> INFO: run duration 3 seconds, buffer almost full (81%), pausing triggers.
[10:54:05.060] <TB2> INFO: Resuming triggers.
[10:54:08.372] <TB2> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[10:54:37.594] <TB2> INFO: Resuming triggers.
[10:54:40.897] <TB2> INFO: run duration 9 seconds, buffer almost full (81%), pausing triggers.
[10:55:10.515] <TB2> INFO: Resuming triggers.
[10:55:13.822] <TB2> INFO: run duration 13 seconds, buffer almost full (81%), pausing triggers.
[10:55:43.121] <TB2> INFO: Resuming triggers.
[10:55:46.424] <TB2> INFO: run duration 16 seconds, buffer almost full (81%), pausing triggers.
[10:56:15.876] <TB2> INFO: Resuming triggers.
[10:56:19.178] <TB2> INFO: run duration 19 seconds, buffer almost full (81%), pausing triggers.
[10:56:48.504] <TB2> INFO: Resuming triggers.
[10:56:51.807] <TB2> INFO: run duration 23 seconds, buffer almost full (81%), pausing triggers.
[10:57:21.133] <TB2> INFO: Resuming triggers.
[10:57:24.435] <TB2> INFO: run duration 26 seconds, buffer almost full (81%), pausing triggers.
[10:57:54.169] <TB2> INFO: Resuming triggers.
[10:57:57.469] <TB2> INFO: run duration 29 seconds, buffer almost full (81%), pausing triggers.
[10:58:26.894] <TB2> INFO: Resuming triggers.
[10:58:30.196] <TB2> INFO: run duration 32 seconds, buffer almost full (81%), pausing triggers.
[10:58:59.025] <TB2> INFO: Resuming triggers.
[10:59:02.326] <TB2> INFO: run duration 36 seconds, buffer almost full (81%), pausing triggers.
[10:59:31.412] <TB2> INFO: Resuming triggers.
[10:59:34.711] <TB2> INFO: run duration 39 seconds, buffer almost full (81%), pausing triggers.
[11:00:03.589] <TB2> INFO: Resuming triggers.
[11:00:06.887] <TB2> INFO: run duration 42 seconds, buffer almost full (81%), pausing triggers.
[11:00:35.842] <TB2> INFO: Resuming triggers.
[11:00:39.139] <TB2> INFO: run duration 46 seconds, buffer almost full (81%), pausing triggers.
[11:01:08.464] <TB2> INFO: Resuming triggers.
[11:01:11.761] <TB2> INFO: run duration 49 seconds, buffer almost full (81%), pausing triggers.
[11:01:41.020] <TB2> INFO: Resuming triggers.
[11:01:44.318] <TB2> INFO: run duration 52 seconds, buffer almost full (81%), pausing triggers.
[11:02:13.555] <TB2> INFO: Resuming triggers.
[11:02:16.851] <TB2> INFO: run duration 56 seconds, buffer almost full (81%), pausing triggers.
[11:02:46.921] <TB2> INFO: Resuming triggers.
[11:02:50.214] <TB2> INFO: run duration 59 seconds, buffer almost full (81%), pausing triggers.
[11:03:19.151] <TB2> INFO: Resuming triggers.
[11:03:22.443] <TB2> INFO: run duration 62 seconds, buffer almost full (81%), pausing triggers.
[11:03:51.585] <TB2> INFO: Resuming triggers.
[11:03:54.881] <TB2> INFO: run duration 65 seconds, buffer almost full (81%), pausing triggers.
[11:04:24.127] <TB2> INFO: Resuming triggers.
[11:04:27.420] <TB2> INFO: run duration 69 seconds, buffer almost full (81%), pausing triggers.
[11:04:56.512] <TB2> INFO: Resuming triggers.
[11:04:59.804] <TB2> INFO: run duration 72 seconds, buffer almost full (81%), pausing triggers.
[11:05:29.261] <TB2> INFO: Resuming triggers.
[11:05:32.556] <TB2> INFO: run duration 75 seconds, buffer almost full (81%), pausing triggers.
[11:06:01.364] <TB2> INFO: Resuming triggers.
[11:06:04.661] <TB2> INFO: run duration 79 seconds, buffer almost full (81%), pausing triggers.
[11:06:33.327] <TB2> INFO: Resuming triggers.
[11:06:36.619] <TB2> INFO: run duration 82 seconds, buffer almost full (81%), pausing triggers.
[11:07:04.664] <TB2> INFO: Resuming triggers.
[11:07:07.958] <TB2> INFO: run duration 85 seconds, buffer almost full (81%), pausing triggers.
[11:07:36.573] <TB2> INFO: Resuming triggers.
[11:07:39.865] <TB2> INFO: run duration 88 seconds, buffer almost full (81%), pausing triggers.
[11:08:07.429] <TB2> INFO: Resuming triggers.
[11:08:10.718] <TB2> INFO: run duration 92 seconds, buffer almost full (81%), pausing triggers.
[11:08:38.595] <TB2> INFO: Resuming triggers.
[11:08:41.887] <TB2> INFO: run duration 95 seconds, buffer almost full (81%), pausing triggers.
[11:09:11.092] <TB2> INFO: Resuming triggers.
[11:09:14.382] <TB2> INFO: run duration 98 seconds, buffer almost full (81%), pausing triggers.
[11:09:43.416] <TB2> INFO: Resuming triggers.
[11:09:44.564] <TB2> INFO: data taking finished, elapsed time: 100 seconds.
[11:09:54.990] <TB2> INFO: PixTest:: pg_setup set to default.
[11:09:54.992] <TB2> INFO: PixTestXray::doPhRun() done
[11:09:54.992] <TB2> INFO: PixTestXray::doTest() done
[11:09:55.175] <TB2> INFO: enter test to run
[11:09:55.175] <TB2> INFO: test: no parameter change
[11:09:55.428] <TB2> QUIET: Connection to board 162 closed.
[11:09:55.508] <TB2> INFO: pXar: this is the end, my friend

[11:10:46.293] <TB2> INFO: *** Welcome to pxar ***
[11:10:46.293] <TB2> INFO: *** Today: 2016/02/09
[11:10:46.355] <TB2> INFO: *** Version: 9751
[11:10:46.355] <TB2> INFO: readRocDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//dacParameters35_C15.dat
[11:10:46.356] <TB2> INFO: readTbmDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//tbmParameters_C0b.dat
[11:10:46.356] <TB2> INFO: readMaskFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//defaultMaskFile.dat
[11:10:46.356] <TB2> INFO: readTrimFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//trimParameters35_C15.dat
[11:10:46.426] <TB2> INFO: clk: 4
[11:10:46.426] <TB2> INFO: ctr: 4
[11:10:46.426] <TB2> INFO: sda: 19
[11:10:46.426] <TB2> INFO: tin: 9
[11:10:46.426] <TB2> INFO: level: 15
[11:10:46.426] <TB2> INFO: triggerdelay: 0
[11:10:46.426] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[11:10:46.426] <TB2> INFO: Log level: INFO
[11:10:46.439] <TB2> INFO: Found DTB DTB_WXENWR
[11:10:46.451] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[11:10:46.453] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[11:10:46.455] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[11:10:48.016] <TB2> INFO: DUT info:
[11:10:48.016] <TB2> INFO: The DUT currently contains the following objects:
[11:10:48.016] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[11:10:48.016] <TB2> INFO: TBM Core alpha (0): 7 registers set
[11:10:48.016] <TB2> INFO: TBM Core beta (1): 7 registers set
[11:10:48.016] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:10:48.016] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.016] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.016] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.016] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.016] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.016] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.016] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.016] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.016] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.016] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.016] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.017] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.017] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.017] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.017] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.017] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:48.418] <TB2> INFO: enter 'restricted' command line mode
[11:10:48.418] <TB2> INFO: enter test to run
[11:10:48.418] <TB2> INFO: test: Highrate no parameter change
[11:10:48.418] <TB2> INFO: running: highrate
[11:10:48.418] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//phCalibrationFitErr35_C15.dat
[11:10:48.591] <TB2> INFO: ----------------------------------------------------------------------
[11:10:48.591] <TB2> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[11:10:48.591] <TB2> INFO: ----------------------------------------------------------------------
[11:10:48.597] <TB2> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 15 .. 75 (20/-1) hits flags = 896 (plus default)
[11:10:48.608] <TB2> INFO: dacScan step from 15 .. 34
[11:10:48.608] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[11:10:48.608] <TB2> INFO: run 1 of 1
[11:10:49.100] <TB2> INFO: Expecting 4160000 events.
[11:11:22.594] <TB2> INFO: 414600 events read in total (33090ms).
[11:11:55.508] <TB2> INFO: 831700 events read in total (66004ms).
[11:12:28.523] <TB2> INFO: 1248950 events read in total (99019ms).
[11:13:01.646] <TB2> INFO: 1666250 events read in total (132142ms).
[11:13:34.792] <TB2> INFO: 2083250 events read in total (165288ms).
[11:14:08.055] <TB2> INFO: 2500300 events read in total (198551ms).
[11:14:41.311] <TB2> INFO: 2917400 events read in total (231807ms).
[11:15:14.174] <TB2> INFO: 3334100 events read in total (264670ms).
[11:15:47.323] <TB2> INFO: 3750100 events read in total (297819ms).
[11:16:20.141] <TB2> INFO: 4160000 events read in total (330637ms).
[11:16:20.464] <TB2> INFO: Test took 331855ms.
[11:16:29.235] <TB2> INFO: dacScan step from 35 .. 54
[11:16:29.235] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[11:16:29.235] <TB2> INFO: run 1 of 1
[11:16:29.723] <TB2> INFO: Expecting 4160000 events.
[11:17:02.151] <TB2> INFO: 358350 events read in total (32025ms).
[11:17:34.433] <TB2> INFO: 717700 events read in total (64307ms).
[11:18:06.982] <TB2> INFO: 1075950 events read in total (96856ms).
[11:18:38.666] <TB2> INFO: 1433350 events read in total (128540ms).
[11:19:10.921] <TB2> INFO: 1789800 events read in total (160795ms).
[11:19:42.733] <TB2> INFO: 2144700 events read in total (192607ms).
[11:20:14.631] <TB2> INFO: 2497500 events read in total (224505ms).
[11:20:46.280] <TB2> INFO: 2847700 events read in total (256154ms).
[11:21:19.196] <TB2> INFO: 3194850 events read in total (289070ms).
[11:21:52.289] <TB2> INFO: 3540250 events read in total (322173ms).
[11:22:24.274] <TB2> INFO: 3884350 events read in total (354148ms).
[11:22:49.748] <TB2> INFO: 4160000 events read in total (379622ms).
[11:22:50.033] <TB2> INFO: Test took 380797ms.
[11:23:00.035] <TB2> INFO: dacScan step from 55 .. 74
[11:23:00.035] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[11:23:00.059] <TB2> INFO: run 1 of 1
[11:23:00.584] <TB2> INFO: Expecting 4160000 events.
[11:23:32.229] <TB2> INFO: 315300 events read in total (31242ms).
[11:24:03.332] <TB2> INFO: 631550 events read in total (62345ms).
[11:24:33.794] <TB2> INFO: 948050 events read in total (92807ms).
[11:25:04.897] <TB2> INFO: 1264450 events read in total (123910ms).
[11:25:36.063] <TB2> INFO: 1580700 events read in total (155076ms).
[11:26:07.108] <TB2> INFO: 1896950 events read in total (186121ms).
[11:26:38.163] <TB2> INFO: 2213150 events read in total (217176ms).
[11:27:09.140] <TB2> INFO: 2529350 events read in total (248153ms).
[11:27:39.677] <TB2> INFO: 2845650 events read in total (278690ms).
[11:28:10.691] <TB2> INFO: 3161500 events read in total (309704ms).
[11:28:42.129] <TB2> INFO: 3477600 events read in total (341142ms).
[11:29:12.887] <TB2> INFO: 3794050 events read in total (371900ms).
[11:29:43.878] <TB2> INFO: 4110050 events read in total (402892ms).
[11:29:49.192] <TB2> INFO: 4160000 events read in total (408205ms).
[11:29:49.436] <TB2> INFO: Test took 409346ms.
[11:29:57.527] <TB2> INFO: dacScan step from 75 .. 75
[11:29:57.527] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[11:29:57.527] <TB2> INFO: run 1 of 1
[11:29:58.049] <TB2> INFO: Expecting 208000 events.
[11:30:20.014] <TB2> INFO: 208000 events read in total (21563ms).
[11:30:20.023] <TB2> INFO: Test took 22495ms.
[11:30:20.501] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:21.722] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:22.753] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:23.782] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:24.837] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:25.888] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:26.988] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:28.071] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:29.137] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:30.206] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:31.280] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:32.371] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:33.424] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:34.482] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:35.507] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:36.543] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:37.567] <TB2> INFO: PixTest:: pg_setup set to default.
[11:30:37.569] <TB2> INFO: vcal mean: 39.35 38.81 37.68 41.29 41.33 43.81 43.34 42.85 44.30 43.88 43.57 42.43 42.05 39.08 39.52 39.57
[11:30:37.569] <TB2> INFO: vcal RMS: 2.04 1.13 0.91 1.46 1.20 1.44 1.48 1.42 1.55 1.48 1.48 1.65 1.40 1.20 1.14 1.33
[11:30:37.569] <TB2> INFO: number of X-ray hits detected: 222983 206506 177576 324441 337301 432022 398968 416826 473154 467151 447417 370744 341544 201467 225382 226361
[11:30:37.569] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:30:37.569] <TB2> INFO: X-ray hit rate [MHz/cm2]: 65.4 60.5 52.0 95.1 98.9 126.6 116.9 122.2 138.7 136.9 131.1 108.7 100.1 59.1 66.1 66.3
[11:30:37.569] <TB2> INFO: PixTestHighRate::doXNoiseMaps() done
[11:30:37.696] <TB2> INFO: enter test to run
[11:30:37.696] <TB2> INFO: test: no parameter change
[11:30:37.885] <TB2> QUIET: Connection to board 162 closed.
[11:30:37.965] <TB2> INFO: pXar: this is the end, my friend

[11:50:45.307] <TB2> INFO: *** Welcome to pxar ***
[11:50:45.307] <TB2> INFO: *** Today: 2016/02/09
[11:50:45.362] <TB2> INFO: *** Version: 9751
[11:50:45.362] <TB2> INFO: readRocDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[11:50:45.363] <TB2> INFO: readTbmDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[11:50:45.363] <TB2> INFO: readMaskFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[11:50:45.363] <TB2> INFO: readTrimFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[11:50:45.433] <TB2> INFO: clk: 4
[11:50:45.433] <TB2> INFO: ctr: 4
[11:50:45.433] <TB2> INFO: sda: 19
[11:50:45.433] <TB2> INFO: tin: 9
[11:50:45.433] <TB2> INFO: level: 15
[11:50:45.433] <TB2> INFO: triggerdelay: 0
[11:50:45.433] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[11:50:45.433] <TB2> INFO: Log level: INFO
[11:50:45.447] <TB2> INFO: Found DTB DTB_WXENWR
[11:50:45.460] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[11:50:45.462] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[11:50:45.464] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[11:50:47.003] <TB2> INFO: DUT info:
[11:50:47.003] <TB2> INFO: The DUT currently contains the following objects:
[11:50:47.003] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[11:50:47.003] <TB2> INFO: TBM Core alpha (0): 7 registers set
[11:50:47.003] <TB2> INFO: TBM Core beta (1): 7 registers set
[11:50:47.003] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:50:47.003] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.003] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.004] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.004] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.004] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.004] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.004] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.004] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.004] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.004] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.004] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.004] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.004] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.004] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.004] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.004] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:47.404] <TB2> INFO: enter 'restricted' command line mode
[11:50:47.405] <TB2> INFO: enter test to run
[11:50:47.405] <TB2> INFO: test: HighRate no parameter change
[11:50:47.405] <TB2> INFO: running: highrate
[11:50:47.405] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[11:50:47.628] <TB2> INFO: ----------------------------------------------------------------------
[11:50:47.628] <TB2> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[11:50:47.628] <TB2> INFO: ----------------------------------------------------------------------
[11:50:47.724] <TB2> INFO: Expecting 768 events.
[11:50:48.715] <TB2> INFO: 768 events read in total (432ms).
[11:50:48.779] <TB2> INFO: Test took 1145ms.
[11:50:49.267] <TB2> INFO: Expecting 41600 events.
[11:50:53.033] <TB2> INFO: 41600 events read in total (3363ms).
[11:50:53.035] <TB2> INFO: Test took 4250ms.
[11:50:53.674] <TB2> INFO: Expecting 41600 events.
[11:50:57.517] <TB2> INFO: 41600 events read in total (3440ms).
[11:50:57.520] <TB2> INFO: Test took 4355ms.
[11:50:58.139] <TB2> INFO: Expecting 41600 events.
[11:51:01.937] <TB2> INFO: 41600 events read in total (3396ms).
[11:51:01.939] <TB2> INFO: Test took 4290ms.
[11:51:02.537] <TB2> INFO: Expecting 41600 events.
[11:51:06.357] <TB2> INFO: 41600 events read in total (3418ms).
[11:51:06.360] <TB2> INFO: Test took 4305ms.
[11:51:06.974] <TB2> INFO: Expecting 41600 events.
[11:51:10.846] <TB2> INFO: 41600 events read in total (3470ms).
[11:51:10.849] <TB2> INFO: Test took 4365ms.
[11:51:11.448] <TB2> INFO: Expecting 41600 events.
[11:51:15.326] <TB2> INFO: 41600 events read in total (3476ms).
[11:51:15.328] <TB2> INFO: Test took 4362ms.
[11:51:15.956] <TB2> INFO: Expecting 41600 events.
[11:51:19.781] <TB2> INFO: 41600 events read in total (3423ms).
[11:51:19.783] <TB2> INFO: Test took 4335ms.
[11:51:20.392] <TB2> INFO: Expecting 41600 events.
[11:51:24.200] <TB2> INFO: 41600 events read in total (3406ms).
[11:51:24.202] <TB2> INFO: Test took 4299ms.
[11:51:24.836] <TB2> INFO: Expecting 41600 events.
[11:51:28.669] <TB2> INFO: 41600 events read in total (3431ms).
[11:51:28.671] <TB2> INFO: Test took 4340ms.
[11:51:29.270] <TB2> INFO: Expecting 41600 events.
[11:51:33.248] <TB2> INFO: 41600 events read in total (3576ms).
[11:51:33.250] <TB2> INFO: Test took 4464ms.
[11:51:33.866] <TB2> INFO: Expecting 41600 events.
[11:51:37.722] <TB2> INFO: 41600 events read in total (3453ms).
[11:51:37.725] <TB2> INFO: Test took 4351ms.
[11:51:38.330] <TB2> INFO: Expecting 41600 events.
[11:51:42.218] <TB2> INFO: 41600 events read in total (3486ms).
[11:51:42.221] <TB2> INFO: Test took 4378ms.
[11:51:42.817] <TB2> INFO: Expecting 41600 events.
[11:51:46.710] <TB2> INFO: 41600 events read in total (3490ms).
[11:51:46.712] <TB2> INFO: Test took 4378ms.
[11:51:47.322] <TB2> INFO: Expecting 41600 events.
[11:51:51.211] <TB2> INFO: 41600 events read in total (3486ms).
[11:51:51.213] <TB2> INFO: Test took 4373ms.
[11:51:51.828] <TB2> INFO: Expecting 41600 events.
[11:51:55.703] <TB2> INFO: 41600 events read in total (3472ms).
[11:51:55.705] <TB2> INFO: Test took 4364ms.
[11:51:56.321] <TB2> INFO: Expecting 41600 events.
[11:52:00.116] <TB2> INFO: 41600 events read in total (3392ms).
[11:52:00.118] <TB2> INFO: Test took 4296ms.
[11:52:00.719] <TB2> INFO: Expecting 41600 events.
[11:52:04.630] <TB2> INFO: 41600 events read in total (3508ms).
[11:52:04.632] <TB2> INFO: Test took 4397ms.
[11:52:05.257] <TB2> INFO: Expecting 41600 events.
[11:52:09.052] <TB2> INFO: 41600 events read in total (3392ms).
[11:52:09.055] <TB2> INFO: Test took 4281ms.
[11:52:09.651] <TB2> INFO: Expecting 41600 events.
[11:52:13.719] <TB2> INFO: 41600 events read in total (3666ms).
[11:52:13.721] <TB2> INFO: Test took 4551ms.
[11:52:14.359] <TB2> INFO: Expecting 41600 events.
[11:52:18.262] <TB2> INFO: 41600 events read in total (3501ms).
[11:52:18.264] <TB2> INFO: Test took 4393ms.
[11:52:18.648] <TB2> INFO: enter test to run
[11:52:18.648] <TB2> INFO: test: Pretest no parameter change
[11:52:18.648] <TB2> INFO: running: pretest
[11:52:18.649] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[11:52:18.649] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[11:52:18.649] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[11:52:18.649] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[11:52:18.649] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[11:52:18.649] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[11:52:18.649] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[11:52:18.649] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[11:52:18.649] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[11:52:18.649] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[11:52:18.649] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[11:52:18.650] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[11:52:18.650] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[11:52:18.650] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[11:52:18.650] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[11:52:18.650] <TB2> INFO: write dac parameters into /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[11:52:18.650] <TB2> INFO: enter test to run
[11:52:18.650] <TB2> INFO: test: no parameter change
[11:52:18.834] <TB2> QUIET: Connection to board 162 closed.
[11:52:18.914] <TB2> INFO: pXar: this is the end, my friend

[11:52:51.259] <TB2> INFO: *** Welcome to pxar ***
[11:52:51.259] <TB2> INFO: *** Today: 2016/02/09
[11:52:51.317] <TB2> INFO: *** Version: 9751
[11:52:51.317] <TB2> INFO: readRocDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//dacParameters35_C15.dat
[11:52:51.318] <TB2> INFO: readTbmDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//tbmParameters_C0b.dat
[11:52:51.318] <TB2> INFO: readMaskFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//defaultMaskFile.dat
[11:52:51.318] <TB2> INFO: readTrimFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//trimParameters35_C15.dat
[11:52:51.388] <TB2> INFO: clk: 4
[11:52:51.388] <TB2> INFO: ctr: 4
[11:52:51.388] <TB2> INFO: sda: 19
[11:52:51.388] <TB2> INFO: tin: 9
[11:52:51.388] <TB2> INFO: level: 15
[11:52:51.388] <TB2> INFO: triggerdelay: 0
[11:52:51.388] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[11:52:51.388] <TB2> INFO: Log level: INFO
[11:52:51.400] <TB2> INFO: Found DTB DTB_WXENWR
[11:52:51.412] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[11:52:51.414] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[11:52:51.416] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[11:52:52.957] <TB2> INFO: DUT info:
[11:52:52.957] <TB2> INFO: The DUT currently contains the following objects:
[11:52:52.957] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[11:52:52.957] <TB2> INFO: TBM Core alpha (0): 7 registers set
[11:52:52.957] <TB2> INFO: TBM Core beta (1): 7 registers set
[11:52:52.957] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:52:52.957] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:52.957] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:53.358] <TB2> INFO: enter 'restricted' command line mode
[11:52:53.358] <TB2> INFO: enter test to run
[11:52:53.358] <TB2> INFO: test: PixelAlive no parameter change
[11:52:53.358] <TB2> INFO: running: pixelalive
[11:52:53.362] <TB2> INFO: ######################################################################
[11:52:53.362] <TB2> INFO: PixTestAlive::doTest()
[11:52:53.362] <TB2> INFO: ######################################################################
[11:52:53.363] <TB2> INFO: ----------------------------------------------------------------------
[11:52:53.363] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:52:53.363] <TB2> INFO: ----------------------------------------------------------------------
[11:52:53.630] <TB2> INFO: Expecting 208000 events.
[11:53:04.876] <TB2> INFO: 208000 events read in total (10686ms).
[11:53:04.878] <TB2> INFO: Test took 11512ms.
[11:53:05.133] <TB2> INFO: PixTestAlive::aliveTest() done
[11:53:05.133] <TB2> INFO: number of dead pixels (per ROC): 2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1
[11:53:05.134] <TB2> INFO: ----------------------------------------------------------------------
[11:53:05.134] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:53:05.134] <TB2> INFO: ----------------------------------------------------------------------
[11:53:05.408] <TB2> INFO: Expecting 208000 events.
[11:53:12.903] <TB2> INFO: 208000 events read in total (6938ms).
[11:53:12.903] <TB2> INFO: Test took 7766ms.
[11:53:12.904] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:53:13.162] <TB2> INFO: PixTestAlive::maskTest() done
[11:53:13.162] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:53:13.163] <TB2> INFO: ----------------------------------------------------------------------
[11:53:13.163] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:53:13.163] <TB2> INFO: ----------------------------------------------------------------------
[11:53:13.432] <TB2> INFO: Expecting 208000 events.
[11:53:24.604] <TB2> INFO: 208000 events read in total (10615ms).
[11:53:24.604] <TB2> INFO: Test took 11439ms.
[11:53:24.819] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[11:53:24.819] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:53:24.819] <TB2> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[11:53:24.852] <TB2> INFO: enter test to run
[11:53:24.852] <TB2> INFO: test: delay setting parameters: ->2<-
[11:53:24.852] <TB2> INFO: delay test by 2 seconds...
[11:53:26.852] <TB2> INFO: enter test to run
[11:53:26.852] <TB2> INFO: test: HighRate no parameter change
[11:53:26.852] <TB2> INFO: running: highrate
[11:53:26.853] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//phCalibrationFitErr35_C15.dat
[11:53:27.015] <TB2> INFO: ----------------------------------------------------------------------
[11:53:27.015] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:53:27.015] <TB2> INFO: ----------------------------------------------------------------------
[11:53:27.513] <TB2> INFO: Expecting 208000 events.
[11:53:43.545] <TB2> INFO: 208000 events read in total (15630ms).
[11:53:43.551] <TB2> INFO: Test took 16531ms.
[11:53:44.114] <TB2> INFO: number of dead pixels (per ROC): 2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1
[11:53:44.114] <TB2> INFO: number of red-efficiency pixels: 162 116 133 243 233 358 322 336 389 404 406 306 241 146 162 125
[11:53:44.114] <TB2> INFO: number of X-ray hits detected: 111585 101714 85830 162085 168000 222041 200723 208620 238167 237082 227738 187024 169328 98828 111049 113174
[11:53:44.114] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:53:44.114] <TB2> INFO: number of Vcal hits detected: 207736 207883 207861 207745 207750 207614 207645 207646 207583 207538 207567 207635 207746 207848 207837 207823
[11:53:44.114] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.9 99.9 99.8 99.8 99.8 99.8 99.8 99.8 99.9 99.9 99.9 99.9 99.9
[11:53:44.114] <TB2> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.9 99.9 99.8 99.8 99.8 99.8 99.8 99.8 99.8 99.9 99.9 99.9 99.9
[11:53:44.114] <TB2> INFO: X-ray hit rate [MHz/cm2]: 32.7 29.8 25.2 47.5 49.2 65.1 58.8 61.1 69.8 69.5 66.8 54.8 49.6 29.0 32.5 33.2
[11:53:44.114] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[11:53:44.159] <TB2> INFO: PixTest:: pg_setup set to default.
[11:53:44.168] <TB2> INFO: enter test to run
[11:53:44.168] <TB2> INFO: test: no parameter change
[11:53:44.443] <TB2> QUIET: Connection to board 162 closed.
[11:53:44.523] <TB2> INFO: pXar: this is the end, my friend

[11:54:17.172] <TB2> INFO: *** Welcome to pxar ***
[11:54:17.172] <TB2> INFO: *** Today: 2016/02/09
[11:54:17.229] <TB2> INFO: *** Version: 9751
[11:54:17.229] <TB2> INFO: readRocDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//dacParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//dacParameters35_C15.dat
[11:54:17.229] <TB2> INFO: readTbmDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//tbmParameters_C0a.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//tbmParameters_C0b.dat
[11:54:17.230] <TB2> INFO: readMaskFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//defaultMaskFile.dat
[11:54:17.230] <TB2> INFO: readTrimFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//trimParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//trimParameters35_C15.dat
[11:54:17.315] <TB2> INFO: clk: 4
[11:54:17.315] <TB2> INFO: ctr: 4
[11:54:17.315] <TB2> INFO: sda: 19
[11:54:17.315] <TB2> INFO: tin: 9
[11:54:17.315] <TB2> INFO: level: 15
[11:54:17.315] <TB2> INFO: triggerdelay: 0
[11:54:17.315] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[11:54:17.315] <TB2> INFO: Log level: INFO
[11:54:17.328] <TB2> INFO: Found DTB DTB_WXENWR
[11:54:17.340] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[11:54:17.342] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[11:54:17.344] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[11:54:18.908] <TB2> INFO: DUT info:
[11:54:18.908] <TB2> INFO: The DUT currently contains the following objects:
[11:54:18.908] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[11:54:18.908] <TB2> INFO: TBM Core alpha (0): 7 registers set
[11:54:18.908] <TB2> INFO: TBM Core beta (1): 7 registers set
[11:54:18.908] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:54:18.908] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:18.908] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:19.309] <TB2> INFO: enter 'restricted' command line mode
[11:54:19.309] <TB2> INFO: enter test to run
[11:54:19.309] <TB2> INFO: test: PixelAlive no parameter change
[11:54:19.309] <TB2> INFO: running: pixelalive
[11:54:19.313] <TB2> INFO: ######################################################################
[11:54:19.313] <TB2> INFO: PixTestAlive::doTest()
[11:54:19.313] <TB2> INFO: ######################################################################
[11:54:19.314] <TB2> INFO: ----------------------------------------------------------------------
[11:54:19.315] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:54:19.315] <TB2> INFO: ----------------------------------------------------------------------
[11:54:19.605] <TB2> INFO: Expecting 208000 events.
[11:54:30.956] <TB2> INFO: 208000 events read in total (10792ms).
[11:54:30.958] <TB2> INFO: Test took 11641ms.
[11:54:31.201] <TB2> INFO: PixTestAlive::aliveTest() done
[11:54:31.201] <TB2> INFO: number of dead pixels (per ROC): 2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1
[11:54:31.202] <TB2> INFO: ----------------------------------------------------------------------
[11:54:31.202] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:54:31.202] <TB2> INFO: ----------------------------------------------------------------------
[11:54:31.473] <TB2> INFO: Expecting 208000 events.
[11:54:38.933] <TB2> INFO: 208000 events read in total (6903ms).
[11:54:38.933] <TB2> INFO: Test took 7728ms.
[11:54:38.933] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:54:39.193] <TB2> INFO: PixTestAlive::maskTest() done
[11:54:39.193] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:54:39.194] <TB2> INFO: ----------------------------------------------------------------------
[11:54:39.194] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:54:39.194] <TB2> INFO: ----------------------------------------------------------------------
[11:54:39.488] <TB2> INFO: Expecting 208000 events.
[11:54:50.678] <TB2> INFO: 208000 events read in total (10634ms).
[11:54:50.678] <TB2> INFO: Test took 11482ms.
[11:54:50.894] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[11:54:50.894] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:54:50.894] <TB2> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[11:54:50.924] <TB2> INFO: enter test to run
[11:54:50.924] <TB2> INFO: test: delay setting parameters: ->2<-
[11:54:50.924] <TB2> INFO: delay test by 2 seconds...
[11:54:52.924] <TB2> INFO: enter test to run
[11:54:52.924] <TB2> INFO: test: HighRate no parameter change
[11:54:52.924] <TB2> INFO: running: highrate
[11:54:52.924] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//phCalibrationFitErr35_C15.dat
[11:54:53.055] <TB2> INFO: ----------------------------------------------------------------------
[11:54:53.055] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:54:53.055] <TB2> INFO: ----------------------------------------------------------------------
[11:54:53.541] <TB2> INFO: Expecting 208000 events.
[11:55:11.519] <TB2> INFO: 208000 events read in total (17575ms).
[11:55:11.528] <TB2> INFO: Test took 18469ms.
[11:55:12.258] <TB2> INFO: number of dead pixels (per ROC): 2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1
[11:55:12.258] <TB2> INFO: number of red-efficiency pixels: 290 205 231 424 442 791 642 712 827 885 841 582 474 242 271 241
[11:55:12.258] <TB2> INFO: number of X-ray hits detected: 163290 149735 127329 237170 246907 321594 293213 305125 347709 342876 329920 272872 247877 145692 163300 165500
[11:55:12.258] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:55:12.258] <TB2> INFO: number of Vcal hits detected: 207601 207789 207748 207545 207500 207086 207218 207203 207033 206893 206988 207310 207487 207736 207715 207706
[11:55:12.258] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.8 99.8 99.6 99.7 99.6 99.6 99.5 99.6 99.7 99.8 99.9 99.9 99.9
[11:55:12.258] <TB2> INFO: Vcal hit overall efficiency (%): 99.8 99.9 99.9 99.8 99.8 99.6 99.6 99.6 99.5 99.5 99.5 99.7 99.8 99.9 99.9 99.9
[11:55:12.258] <TB2> INFO: X-ray hit rate [MHz/cm2]: 47.9 43.9 37.3 69.5 72.4 94.3 85.9 89.4 101.9 100.5 96.7 80.0 72.7 42.7 47.9 48.5
[11:55:12.258] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[11:55:12.302] <TB2> INFO: PixTest:: pg_setup set to default.
[11:55:12.313] <TB2> INFO: enter test to run
[11:55:12.313] <TB2> INFO: test: no parameter change
[11:55:12.527] <TB2> QUIET: Connection to board 162 closed.
[11:55:12.607] <TB2> INFO: pXar: this is the end, my friend

[11:55:48.274] <TB2> INFO: *** Welcome to pxar ***
[11:55:48.274] <TB2> INFO: *** Today: 2016/02/09
[11:55:48.332] <TB2> INFO: *** Version: 9751
[11:55:48.332] <TB2> INFO: readRocDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//dacParameters35_C15.dat
[11:55:48.333] <TB2> INFO: readTbmDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//tbmParameters_C0b.dat
[11:55:48.333] <TB2> INFO: readMaskFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//defaultMaskFile.dat
[11:55:48.333] <TB2> INFO: readTrimFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//trimParameters35_C15.dat
[11:55:48.424] <TB2> INFO: clk: 4
[11:55:48.424] <TB2> INFO: ctr: 4
[11:55:48.424] <TB2> INFO: sda: 19
[11:55:48.424] <TB2> INFO: tin: 9
[11:55:48.424] <TB2> INFO: level: 15
[11:55:48.424] <TB2> INFO: triggerdelay: 0
[11:55:48.424] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[11:55:48.424] <TB2> INFO: Log level: INFO
[11:55:48.437] <TB2> INFO: Found DTB DTB_WXENWR
[11:55:48.450] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[11:55:48.452] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[11:55:48.455] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[11:55:50.026] <TB2> INFO: DUT info:
[11:55:50.026] <TB2> INFO: The DUT currently contains the following objects:
[11:55:50.027] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[11:55:50.027] <TB2> INFO: TBM Core alpha (0): 7 registers set
[11:55:50.027] <TB2> INFO: TBM Core beta (1): 7 registers set
[11:55:50.027] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:55:50.027] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.027] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.428] <TB2> INFO: enter 'restricted' command line mode
[11:55:50.428] <TB2> INFO: enter test to run
[11:55:50.428] <TB2> INFO: test: PixelAlive no parameter change
[11:55:50.428] <TB2> INFO: running: pixelalive
[11:55:50.433] <TB2> INFO: ######################################################################
[11:55:50.433] <TB2> INFO: PixTestAlive::doTest()
[11:55:50.433] <TB2> INFO: ######################################################################
[11:55:50.434] <TB2> INFO: ----------------------------------------------------------------------
[11:55:50.434] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:55:50.434] <TB2> INFO: ----------------------------------------------------------------------
[11:55:50.728] <TB2> INFO: Expecting 208000 events.
[11:56:01.942] <TB2> INFO: 208000 events read in total (10655ms).
[11:56:01.944] <TB2> INFO: Test took 11507ms.
[11:56:02.189] <TB2> INFO: PixTestAlive::aliveTest() done
[11:56:02.189] <TB2> INFO: number of dead pixels (per ROC): 1 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1
[11:56:02.191] <TB2> INFO: ----------------------------------------------------------------------
[11:56:02.191] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:56:02.191] <TB2> INFO: ----------------------------------------------------------------------
[11:56:02.475] <TB2> INFO: Expecting 208000 events.
[11:56:09.921] <TB2> INFO: 208000 events read in total (6889ms).
[11:56:09.922] <TB2> INFO: Test took 7728ms.
[11:56:09.923] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:56:10.180] <TB2> INFO: PixTestAlive::maskTest() done
[11:56:10.180] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:56:10.181] <TB2> INFO: ----------------------------------------------------------------------
[11:56:10.181] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:56:10.181] <TB2> INFO: ----------------------------------------------------------------------
[11:56:10.470] <TB2> INFO: Expecting 208000 events.
[11:56:21.585] <TB2> INFO: 208000 events read in total (10558ms).
[11:56:21.586] <TB2> INFO: Test took 11402ms.
[11:56:21.798] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[11:56:21.798] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:56:21.799] <TB2> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[11:56:21.834] <TB2> INFO: enter test to run
[11:56:21.834] <TB2> INFO: test: delay setting parameters: ->2<-
[11:56:21.834] <TB2> INFO: delay test by 2 seconds...
[11:56:23.834] <TB2> INFO: enter test to run
[11:56:23.834] <TB2> INFO: test: HighRate no parameter change
[11:56:23.834] <TB2> INFO: running: highrate
[11:56:23.834] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//phCalibrationFitErr35_C15.dat
[11:56:24.011] <TB2> INFO: ----------------------------------------------------------------------
[11:56:24.011] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:56:24.011] <TB2> INFO: ----------------------------------------------------------------------
[11:56:24.523] <TB2> INFO: Expecting 208000 events.
[11:56:45.685] <TB2> INFO: 208000 events read in total (20760ms).
[11:56:45.696] <TB2> INFO: Test took 21680ms.
[11:56:46.629] <TB2> INFO: number of dead pixels (per ROC): 2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1
[11:56:46.629] <TB2> INFO: number of red-efficiency pixels: 479 327 415 770 920 1453 1242 1334 1596 1635 1539 1071 822 419 541 401
[11:56:46.629] <TB2> INFO: number of X-ray hits detected: 223529 207717 178933 323024 337222 431081 399554 415826 472271 468540 447859 370974 338530 202543 226681 226899
[11:56:46.629] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:56:46.629] <TB2> INFO: number of Vcal hits detected: 207383 207652 207486 207070 206829 206013 206311 206274 205758 205503 205778 206607 207033 207510 207419 207520
[11:56:46.629] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.8 99.8 99.8 99.6 99.5 99.2 99.3 99.2 99.0 98.9 99.1 99.4 99.6 99.8 99.7 99.8
[11:56:46.629] <TB2> INFO: Vcal hit overall efficiency (%): 99.7 99.8 99.8 99.6 99.4 99.0 99.2 99.2 98.9 98.8 98.9 99.3 99.5 99.8 99.7 99.8
[11:56:46.629] <TB2> INFO: X-ray hit rate [MHz/cm2]: 65.5 60.9 52.4 94.7 98.8 126.4 117.1 121.9 138.4 137.3 131.3 108.7 99.2 59.4 66.4 66.5
[11:56:46.629] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[11:56:46.674] <TB2> INFO: PixTest:: pg_setup set to default.
[11:56:46.685] <TB2> INFO: enter test to run
[11:56:46.685] <TB2> INFO: test: no parameter change
[11:56:46.890] <TB2> QUIET: Connection to board 162 closed.
[11:56:46.971] <TB2> INFO: pXar: this is the end, my friend

[11:57:21.315] <TB2> INFO: *** Welcome to pxar ***
[11:57:21.315] <TB2> INFO: *** Today: 2016/02/09
[11:57:21.376] <TB2> INFO: *** Version: 9751
[11:57:21.376] <TB2> INFO: readRocDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//dacParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//dacParameters35_C15.dat
[11:57:21.377] <TB2> INFO: readTbmDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//tbmParameters_C0a.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//tbmParameters_C0b.dat
[11:57:21.377] <TB2> INFO: readMaskFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//defaultMaskFile.dat
[11:57:21.377] <TB2> INFO: readTrimFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//trimParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//trimParameters35_C15.dat
[11:57:21.457] <TB2> INFO: clk: 4
[11:57:21.457] <TB2> INFO: ctr: 4
[11:57:21.457] <TB2> INFO: sda: 19
[11:57:21.457] <TB2> INFO: tin: 9
[11:57:21.457] <TB2> INFO: level: 15
[11:57:21.457] <TB2> INFO: triggerdelay: 0
[11:57:21.458] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[11:57:21.458] <TB2> INFO: Log level: INFO
[11:57:21.471] <TB2> INFO: Found DTB DTB_WXENWR
[11:57:21.485] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[11:57:21.486] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[11:57:21.489] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[11:57:23.060] <TB2> INFO: DUT info:
[11:57:23.060] <TB2> INFO: The DUT currently contains the following objects:
[11:57:23.060] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[11:57:23.060] <TB2> INFO: TBM Core alpha (0): 7 registers set
[11:57:23.060] <TB2> INFO: TBM Core beta (1): 7 registers set
[11:57:23.060] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:57:23.060] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.060] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:23.461] <TB2> INFO: enter 'restricted' command line mode
[11:57:23.461] <TB2> INFO: enter test to run
[11:57:23.461] <TB2> INFO: test: PixelAlive no parameter change
[11:57:23.461] <TB2> INFO: running: pixelalive
[11:57:23.466] <TB2> INFO: ######################################################################
[11:57:23.466] <TB2> INFO: PixTestAlive::doTest()
[11:57:23.466] <TB2> INFO: ######################################################################
[11:57:23.467] <TB2> INFO: ----------------------------------------------------------------------
[11:57:23.467] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:57:23.467] <TB2> INFO: ----------------------------------------------------------------------
[11:57:23.770] <TB2> INFO: Expecting 208000 events.
[11:57:35.155] <TB2> INFO: 208000 events read in total (10826ms).
[11:57:35.157] <TB2> INFO: Test took 11687ms.
[11:57:35.399] <TB2> INFO: PixTestAlive::aliveTest() done
[11:57:35.399] <TB2> INFO: number of dead pixels (per ROC): 2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1
[11:57:35.400] <TB2> INFO: ----------------------------------------------------------------------
[11:57:35.400] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:57:35.401] <TB2> INFO: ----------------------------------------------------------------------
[11:57:35.673] <TB2> INFO: Expecting 208000 events.
[11:57:43.070] <TB2> INFO: 208000 events read in total (6841ms).
[11:57:43.072] <TB2> INFO: Test took 7668ms.
[11:57:43.072] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:57:43.333] <TB2> INFO: PixTestAlive::maskTest() done
[11:57:43.333] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:57:43.334] <TB2> INFO: ----------------------------------------------------------------------
[11:57:43.334] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:57:43.334] <TB2> INFO: ----------------------------------------------------------------------
[11:57:43.631] <TB2> INFO: Expecting 208000 events.
[11:57:54.886] <TB2> INFO: 208000 events read in total (10698ms).
[11:57:54.886] <TB2> INFO: Test took 11549ms.
[11:57:55.103] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[11:57:55.103] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:57:55.103] <TB2> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[11:57:55.143] <TB2> INFO: enter test to run
[11:57:55.143] <TB2> INFO: test: delay setting parameters: ->2<-
[11:57:55.143] <TB2> INFO: delay test by 2 seconds...
[11:57:57.144] <TB2> INFO: enter test to run
[11:57:57.144] <TB2> INFO: test: HighRate no parameter change
[11:57:57.144] <TB2> INFO: running: highrate
[11:57:57.144] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//phCalibrationFitErr35_C15.dat
[11:57:57.311] <TB2> INFO: ----------------------------------------------------------------------
[11:57:57.311] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:57:57.311] <TB2> INFO: ----------------------------------------------------------------------
[11:57:57.818] <TB2> INFO: Expecting 208000 events.
[11:58:21.259] <TB2> INFO: 208000 events read in total (23039ms).
[11:58:21.271] <TB2> INFO: Test took 23956ms.
[11:58:22.355] <TB2> INFO: number of dead pixels (per ROC): 2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1
[11:58:22.355] <TB2> INFO: number of red-efficiency pixels: 764 454 622 1195 1324 1965 1741 1913 2337 2376 2204 1603 1199 579 786 628
[11:58:22.355] <TB2> INFO: number of X-ray hits detected: 271314 252721 217805 392156 409251 522754 484347 503698 572317 564277 538660 449951 408898 246425 274553 274592
[11:58:22.355] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:58:22.355] <TB2> INFO: number of Vcal hits detected: 207032 207509 207152 206414 206100 204667 205188 205087 204081 203421 204180 205591 206429 207253 207114 207246
[11:58:22.355] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.6 99.8 99.7 99.3 99.2 98.6 98.8 98.7 98.3 98.1 98.4 99.0 99.3 99.7 99.6 99.7
[11:58:22.355] <TB2> INFO: Vcal hit overall efficiency (%): 99.5 99.8 99.6 99.2 99.1 98.4 98.6 98.6 98.1 97.8 98.2 98.8 99.2 99.6 99.6 99.6
[11:58:22.355] <TB2> INFO: X-ray hit rate [MHz/cm2]: 79.5 74.1 63.8 114.9 120.0 153.2 142.0 147.6 167.8 165.4 157.9 131.9 119.9 72.2 80.5 80.5
[11:58:22.355] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[11:58:22.400] <TB2> INFO: PixTest:: pg_setup set to default.
[11:58:22.415] <TB2> INFO: enter test to run
[11:58:22.415] <TB2> INFO: test: no parameter change
[11:58:22.654] <TB2> QUIET: Connection to board 162 closed.
[11:58:22.735] <TB2> INFO: pXar: this is the end, my friend

[11:58:55.009] <TB2> INFO: *** Welcome to pxar ***
[11:58:55.009] <TB2> INFO: *** Today: 2016/02/09
[11:58:55.072] <TB2> INFO: *** Version: 9751
[11:58:55.072] <TB2> INFO: readRocDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//dacParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//dacParameters35_C15.dat
[11:58:55.073] <TB2> INFO: readTbmDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//tbmParameters_C0a.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//tbmParameters_C0b.dat
[11:58:55.073] <TB2> INFO: readMaskFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//defaultMaskFile.dat
[11:58:55.073] <TB2> INFO: readTrimFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//trimParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//trimParameters35_C15.dat
[11:58:55.160] <TB2> INFO: clk: 4
[11:58:55.160] <TB2> INFO: ctr: 4
[11:58:55.160] <TB2> INFO: sda: 19
[11:58:55.160] <TB2> INFO: tin: 9
[11:58:55.160] <TB2> INFO: level: 15
[11:58:55.160] <TB2> INFO: triggerdelay: 0
[11:58:55.160] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[11:58:55.160] <TB2> INFO: Log level: INFO
[11:58:55.173] <TB2> INFO: Found DTB DTB_WXENWR
[11:58:55.186] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[11:58:55.188] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[11:58:55.190] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[11:58:56.736] <TB2> INFO: DUT info:
[11:58:56.736] <TB2> INFO: The DUT currently contains the following objects:
[11:58:56.736] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[11:58:56.736] <TB2> INFO: TBM Core alpha (0): 7 registers set
[11:58:56.736] <TB2> INFO: TBM Core beta (1): 7 registers set
[11:58:56.736] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:58:56.736] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:56.736] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:57.137] <TB2> INFO: enter 'restricted' command line mode
[11:58:57.137] <TB2> INFO: enter test to run
[11:58:57.137] <TB2> INFO: test: PixelAlive no parameter change
[11:58:57.137] <TB2> INFO: running: pixelalive
[11:58:57.140] <TB2> INFO: ######################################################################
[11:58:57.140] <TB2> INFO: PixTestAlive::doTest()
[11:58:57.140] <TB2> INFO: ######################################################################
[11:58:57.142] <TB2> INFO: ----------------------------------------------------------------------
[11:58:57.142] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:58:57.142] <TB2> INFO: ----------------------------------------------------------------------
[11:58:57.416] <TB2> INFO: Expecting 208000 events.
[11:59:08.667] <TB2> INFO: 208000 events read in total (10691ms).
[11:59:08.669] <TB2> INFO: Test took 11525ms.
[11:59:08.908] <TB2> INFO: PixTestAlive::aliveTest() done
[11:59:08.908] <TB2> INFO: number of dead pixels (per ROC): 2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1
[11:59:08.909] <TB2> INFO: ----------------------------------------------------------------------
[11:59:08.909] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:59:08.909] <TB2> INFO: ----------------------------------------------------------------------
[11:59:09.176] <TB2> INFO: Expecting 208000 events.
[11:59:16.710] <TB2> INFO: 208000 events read in total (6977ms).
[11:59:16.712] <TB2> INFO: Test took 7800ms.
[11:59:16.713] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:59:16.969] <TB2> INFO: PixTestAlive::maskTest() done
[11:59:16.969] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:59:16.970] <TB2> INFO: ----------------------------------------------------------------------
[11:59:16.970] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:59:16.970] <TB2> INFO: ----------------------------------------------------------------------
[11:59:17.234] <TB2> INFO: Expecting 208000 events.
[11:59:28.380] <TB2> INFO: 208000 events read in total (10590ms).
[11:59:28.381] <TB2> INFO: Test took 11408ms.
[11:59:28.597] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[11:59:28.597] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:59:28.597] <TB2> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[11:59:28.630] <TB2> INFO: enter test to run
[11:59:28.630] <TB2> INFO: test: delay setting parameters: ->2<-
[11:59:28.630] <TB2> INFO: delay test by 2 seconds...
[11:59:30.630] <TB2> INFO: enter test to run
[11:59:30.630] <TB2> INFO: test: HighRate no parameter change
[11:59:30.630] <TB2> INFO: running: highrate
[11:59:30.631] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//phCalibrationFitErr35_C15.dat
[11:59:30.794] <TB2> INFO: ----------------------------------------------------------------------
[11:59:30.794] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:59:30.794] <TB2> INFO: ----------------------------------------------------------------------
[11:59:31.313] <TB2> INFO: Expecting 208000 events.
[11:59:56.700] <TB2> INFO: 208000 events read in total (24985ms).
[11:59:56.715] <TB2> INFO: Test took 25916ms.
[11:59:58.040] <TB2> INFO: number of dead pixels (per ROC): 1 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1
[11:59:58.040] <TB2> INFO: number of red-efficiency pixels: 1089 705 793 1642 1823 2617 2296 2678 3006 2985 2875 2213 1754 791 1161 847
[11:59:58.040] <TB2> INFO: number of X-ray hits detected: 323481 302929 261675 465262 486056 613856 575682 597707 677048 670492 634647 532885 486125 293984 328256 327722
[11:59:58.041] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:59:58.041] <TB2> INFO: number of Vcal hits detected: 206570 207214 206662 205545 204991 202616 203453 203124 201657 200699 201634 204159 205359 206793 206584 206937
[11:59:58.041] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.4 99.6 99.5 99.0 98.7 97.7 98.1 97.9 97.2 96.9 97.3 98.4 98.9 99.5 99.4 99.6
[11:59:58.041] <TB2> INFO: Vcal hit overall efficiency (%): 99.3 99.6 99.4 98.8 98.6 97.4 97.8 97.7 97.0 96.5 96.9 98.2 98.7 99.4 99.3 99.5
[11:59:58.041] <TB2> INFO: X-ray hit rate [MHz/cm2]: 94.8 88.8 76.7 136.4 142.5 179.9 168.7 175.2 198.4 196.5 186.0 156.2 142.5 86.2 96.2 96.1
[11:59:58.041] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[11:59:58.085] <TB2> INFO: PixTest:: pg_setup set to default.
[11:59:58.100] <TB2> INFO: enter test to run
[11:59:58.100] <TB2> INFO: test: no parameter change
[11:59:58.315] <TB2> QUIET: Connection to board 162 closed.
[11:59:58.395] <TB2> INFO: pXar: this is the end, my friend

[12:00:29.450] <TB2> INFO: *** Welcome to pxar ***
[12:00:29.450] <TB2> INFO: *** Today: 2016/02/09
[12:00:29.514] <TB2> INFO: *** Version: 9751
[12:00:29.514] <TB2> INFO: readRocDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//dacParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//dacParameters35_C15.dat
[12:00:29.515] <TB2> INFO: readTbmDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//tbmParameters_C0a.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//tbmParameters_C0b.dat
[12:00:29.515] <TB2> INFO: readMaskFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//defaultMaskFile.dat
[12:00:29.515] <TB2> INFO: readTrimFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//trimParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//trimParameters35_C15.dat
[12:00:29.601] <TB2> INFO: clk: 4
[12:00:29.601] <TB2> INFO: ctr: 4
[12:00:29.601] <TB2> INFO: sda: 19
[12:00:29.601] <TB2> INFO: tin: 9
[12:00:29.601] <TB2> INFO: level: 15
[12:00:29.601] <TB2> INFO: triggerdelay: 0
[12:00:29.601] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[12:00:29.601] <TB2> INFO: Log level: INFO
[12:00:29.614] <TB2> INFO: Found DTB DTB_WXENWR
[12:00:29.626] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[12:00:29.628] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[12:00:29.630] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[12:00:31.196] <TB2> INFO: DUT info:
[12:00:31.197] <TB2> INFO: The DUT currently contains the following objects:
[12:00:31.197] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[12:00:31.197] <TB2> INFO: TBM Core alpha (0): 7 registers set
[12:00:31.197] <TB2> INFO: TBM Core beta (1): 7 registers set
[12:00:31.197] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:00:31.197] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.197] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:31.598] <TB2> INFO: enter 'restricted' command line mode
[12:00:31.598] <TB2> INFO: enter test to run
[12:00:31.598] <TB2> INFO: test: PixelAlive no parameter change
[12:00:31.598] <TB2> INFO: running: pixelalive
[12:00:31.601] <TB2> INFO: ######################################################################
[12:00:31.601] <TB2> INFO: PixTestAlive::doTest()
[12:00:31.601] <TB2> INFO: ######################################################################
[12:00:31.602] <TB2> INFO: ----------------------------------------------------------------------
[12:00:31.602] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:00:31.602] <TB2> INFO: ----------------------------------------------------------------------
[12:00:31.877] <TB2> INFO: Expecting 208000 events.
[12:00:43.468] <TB2> INFO: 208000 events read in total (11032ms).
[12:00:43.470] <TB2> INFO: Test took 11865ms.
[12:00:43.710] <TB2> INFO: PixTestAlive::aliveTest() done
[12:00:43.710] <TB2> INFO: number of dead pixels (per ROC): 2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1
[12:00:43.712] <TB2> INFO: ----------------------------------------------------------------------
[12:00:43.712] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:00:43.712] <TB2> INFO: ----------------------------------------------------------------------
[12:00:43.976] <TB2> INFO: Expecting 208000 events.
[12:00:51.437] <TB2> INFO: 208000 events read in total (6904ms).
[12:00:51.437] <TB2> INFO: Test took 7723ms.
[12:00:51.438] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[12:00:51.698] <TB2> INFO: PixTestAlive::maskTest() done
[12:00:51.698] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:00:51.699] <TB2> INFO: ----------------------------------------------------------------------
[12:00:51.699] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:00:51.699] <TB2> INFO: ----------------------------------------------------------------------
[12:00:51.987] <TB2> INFO: Expecting 208000 events.
[12:01:03.294] <TB2> INFO: 208000 events read in total (10750ms).
[12:01:03.295] <TB2> INFO: Test took 11594ms.
[12:01:03.509] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[12:01:03.509] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:01:03.509] <TB2> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[12:01:03.540] <TB2> INFO: enter test to run
[12:01:03.540] <TB2> INFO: test: delay setting parameters: ->2<-
[12:01:03.540] <TB2> INFO: delay test by 2 seconds...
[12:01:05.540] <TB2> INFO: enter test to run
[12:01:05.540] <TB2> INFO: test: HighRate no parameter change
[12:01:05.540] <TB2> INFO: running: highrate
[12:01:05.541] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//phCalibrationFitErr35_C15.dat
[12:01:05.680] <TB2> INFO: ----------------------------------------------------------------------
[12:01:05.680] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[12:01:05.680] <TB2> INFO: ----------------------------------------------------------------------
[12:01:06.184] <TB2> INFO: Expecting 208000 events.
[12:01:38.153] <TB2> INFO: 208000 events read in total (31567ms).
[12:01:38.172] <TB2> INFO: Test took 32488ms.
[12:01:39.779] <TB2> INFO: number of dead pixels (per ROC): 2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1
[12:01:39.779] <TB2> INFO: number of red-efficiency pixels: 1906 1273 1401 2718 2980 3748 3464 3773 3990 3962 3869 3435 2991 1259 2145 1609
[12:01:39.779] <TB2> INFO: number of X-ray hits detected: 434514 412429 357973 631238 655528 825960 769390 798894 910427 900570 849226 713825 654252 400684 446987 441659
[12:01:39.779] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[12:01:39.779] <TB2> INFO: number of Vcal hits detected: 205016 206399 204882 202088 200479 194799 196641 196031 191826 189720 192870 198713 201521 205311 204791 205630
[12:01:39.779] <TB2> INFO: Vcal hit fiducial efficiency (%): 98.8 99.3 98.8 97.5 96.8 94.4 95.3 94.8 92.9 92.0 93.5 96.1 97.2 99.0 98.6 99.0
[12:01:39.779] <TB2> INFO: Vcal hit overall efficiency (%): 98.6 99.2 98.5 97.2 96.4 93.7 94.5 94.2 92.2 91.2 92.7 95.5 96.9 98.7 98.5 98.9
[12:01:39.779] <TB2> INFO: X-ray hit rate [MHz/cm2]: 127.4 120.9 104.9 185.0 192.1 242.1 225.5 234.2 266.9 264.0 248.9 209.2 191.8 117.4 131.0 129.5
[12:01:39.779] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[12:01:39.824] <TB2> INFO: PixTest:: pg_setup set to default.
[12:01:39.836] <TB2> INFO: enter test to run
[12:01:39.836] <TB2> INFO: test: no parameter change
[12:01:40.043] <TB2> QUIET: Connection to board 162 closed.
[12:01:40.124] <TB2> INFO: pXar: this is the end, my friend

[12:02:12.346] <TB2> INFO: *** Welcome to pxar ***
[12:02:12.346] <TB2> INFO: *** Today: 2016/02/09
[12:02:12.416] <TB2> INFO: *** Version: 9751
[12:02:12.417] <TB2> INFO: readRocDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//dacParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//dacParameters35_C15.dat
[12:02:12.417] <TB2> INFO: readTbmDacs: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//tbmParameters_C0a.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//tbmParameters_C0b.dat
[12:02:12.417] <TB2> INFO: readMaskFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//defaultMaskFile.dat
[12:02:12.418] <TB2> INFO: readTrimFile: /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//trimParameters35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//trimParameters35_C15.dat
[12:02:12.494] <TB2> INFO: clk: 4
[12:02:12.494] <TB2> INFO: ctr: 4
[12:02:12.494] <TB2> INFO: sda: 19
[12:02:12.494] <TB2> INFO: tin: 9
[12:02:12.494] <TB2> INFO: level: 15
[12:02:12.494] <TB2> INFO: triggerdelay: 0
[12:02:12.494] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[12:02:12.494] <TB2> INFO: Log level: INFO
[12:02:12.508] <TB2> INFO: Found DTB DTB_WXENWR
[12:02:12.520] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[12:02:12.522] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[12:02:12.524] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[12:02:14.062] <TB2> INFO: DUT info:
[12:02:14.062] <TB2> INFO: The DUT currently contains the following objects:
[12:02:14.062] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[12:02:14.062] <TB2> INFO: TBM Core alpha (0): 7 registers set
[12:02:14.062] <TB2> INFO: TBM Core beta (1): 7 registers set
[12:02:14.062] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:02:14.062] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.062] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.062] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.062] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.063] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.063] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.063] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.063] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.063] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.063] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.063] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.063] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.063] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.063] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.063] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.063] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:14.463] <TB2> INFO: enter 'restricted' command line mode
[12:02:14.463] <TB2> INFO: enter test to run
[12:02:14.464] <TB2> INFO: test: PixelAlive no parameter change
[12:02:14.464] <TB2> INFO: running: pixelalive
[12:02:14.467] <TB2> INFO: ######################################################################
[12:02:14.467] <TB2> INFO: PixTestAlive::doTest()
[12:02:14.467] <TB2> INFO: ######################################################################
[12:02:14.469] <TB2> INFO: ----------------------------------------------------------------------
[12:02:14.469] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:02:14.469] <TB2> INFO: ----------------------------------------------------------------------
[12:02:14.733] <TB2> INFO: Expecting 208000 events.
[12:02:25.964] <TB2> INFO: 208000 events read in total (10672ms).
[12:02:25.966] <TB2> INFO: Test took 11495ms.
[12:02:26.205] <TB2> INFO: PixTestAlive::aliveTest() done
[12:02:26.205] <TB2> INFO: number of dead pixels (per ROC): 2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1
[12:02:26.206] <TB2> INFO: ----------------------------------------------------------------------
[12:02:26.206] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:02:26.206] <TB2> INFO: ----------------------------------------------------------------------
[12:02:26.471] <TB2> INFO: Expecting 208000 events.
[12:02:33.837] <TB2> INFO: 208000 events read in total (6809ms).
[12:02:33.838] <TB2> INFO: Test took 7629ms.
[12:02:33.838] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[12:02:34.097] <TB2> INFO: PixTestAlive::maskTest() done
[12:02:34.097] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:02:34.098] <TB2> INFO: ----------------------------------------------------------------------
[12:02:34.098] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:02:34.098] <TB2> INFO: ----------------------------------------------------------------------
[12:02:34.388] <TB2> INFO: Expecting 208000 events.
[12:02:45.791] <TB2> INFO: 208000 events read in total (10846ms).
[12:02:45.792] <TB2> INFO: Test took 11691ms.
[12:02:46.005] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[12:02:46.005] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:02:46.005] <TB2> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[12:02:46.034] <TB2> INFO: enter test to run
[12:02:46.034] <TB2> INFO: test: delay setting parameters: ->2<-
[12:02:46.034] <TB2> INFO: delay test by 2 seconds...
[12:02:48.034] <TB2> INFO: enter test to run
[12:02:48.035] <TB2> INFO: test: HighRate no parameter change
[12:02:48.035] <TB2> INFO: running: highrate
[12:02:48.035] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2153_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//phCalibrationFitErr35_C15.dat
[12:02:48.174] <TB2> INFO: ----------------------------------------------------------------------
[12:02:48.174] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[12:02:48.174] <TB2> INFO: ----------------------------------------------------------------------
[12:02:48.666] <TB2> INFO: Expecting 208000 events.
[12:03:22.731] <TB2> INFO: 186350 events read in total (33662ms).
[12:03:26.839] <TB2> INFO: 208000 events read in total (37770ms).
[12:03:26.858] <TB2> INFO: Test took 38680ms.
[12:03:28.904] <TB2> INFO: number of dead pixels (per ROC): 2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1
[12:03:28.904] <TB2> INFO: number of red-efficiency pixels: 2715 1974 1900 3537 3726 4087 3975 4119 4142 4139 4129 3943 3698 1711 2979 2357
[12:03:28.904] <TB2> INFO: number of X-ray hits detected: 535681 510069 440386 768617 802836 1004477 942690 977709 1118397 1101561 1040786 877163 807914 494126 552139 545530
[12:03:28.904] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[12:03:28.904] <TB2> INFO: number of Vcal hits detected: 202380 205036 202514 196992 193736 183972 187823 185909 178306 175666 180524 191105 195591 202897 201945 203763
[12:03:28.904] <TB2> INFO: Vcal hit fiducial efficiency (%): 97.7 98.7 97.8 95.4 93.9 89.6 91.4 90.2 86.7 85.7 88.0 92.7 94.7 98.0 97.3 98.2
[12:03:28.904] <TB2> INFO: Vcal hit overall efficiency (%): 97.3 98.6 97.4 94.7 93.1 88.4 90.3 89.4 85.7 84.5 86.8 91.9 94.0 97.5 97.1 98.0
[12:03:28.904] <TB2> INFO: X-ray hit rate [MHz/cm2]: 157.0 149.5 129.1 225.3 235.3 294.4 276.3 286.6 327.8 322.9 305.1 257.1 236.8 144.8 161.8 159.9
[12:03:28.904] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[12:03:28.948] <TB2> INFO: PixTest:: pg_setup set to default.
[12:03:28.961] <TB2> INFO: enter test to run
[12:03:28.961] <TB2> INFO: test: no parameter change
[12:03:29.196] <TB2> QUIET: Connection to board 162 closed.
[12:03:29.277] <TB2> INFO: pXar: this is the end, my friend