[15:10:24.128] <TB2> INFO: *** Welcome to pxar ***
[15:10:24.128] <TB2> INFO: *** Today: 2016/02/08
[15:10:24.191] <TB2> INFO: *** Version: 9751
[15:10:24.191] <TB2> INFO: readRocDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//000_PixelAlive_p17//dacParameters35_C15.dat
[15:10:24.192] <TB2> INFO: readTbmDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//000_PixelAlive_p17//tbmParameters_C0b.dat
[15:10:24.192] <TB2> INFO: readMaskFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//000_PixelAlive_p17//defaultMaskFile.dat
[15:10:24.192] <TB2> INFO: readTrimFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//000_PixelAlive_p17//trimParameters35_C15.dat
[15:10:24.258] <TB2> INFO: clk: 4
[15:10:24.258] <TB2> INFO: ctr: 4
[15:10:24.258] <TB2> INFO: sda: 19
[15:10:24.258] <TB2> INFO: tin: 9
[15:10:24.258] <TB2> INFO: level: 15
[15:10:24.258] <TB2> INFO: triggerdelay: 0
[15:10:24.258] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[15:10:24.258] <TB2> INFO: Log level: INFO
[15:10:24.271] <TB2> INFO: Found DTB DTB_WXENWR
[15:10:24.283] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[15:10:24.285] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[15:10:24.287] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[15:10:25.846] <TB2> INFO: DUT info:
[15:10:25.846] <TB2> INFO: The DUT currently contains the following objects:
[15:10:25.846] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[15:10:25.846] <TB2> INFO: TBM Core alpha (0): 7 registers set
[15:10:25.846] <TB2> INFO: TBM Core beta (1): 7 registers set
[15:10:25.846] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[15:10:25.846] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:25.846] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[15:10:26.247] <TB2> INFO: enter 'restricted' command line mode
[15:10:26.247] <TB2> INFO: enter test to run
[15:10:26.248] <TB2> INFO: test: PixelAlive no parameter change
[15:10:26.248] <TB2> INFO: running: pixelalive
[15:10:26.251] <TB2> INFO: ######################################################################
[15:10:26.251] <TB2> INFO: PixTestAlive::doTest()
[15:10:26.251] <TB2> INFO: ######################################################################
[15:10:26.253] <TB2> INFO: ----------------------------------------------------------------------
[15:10:26.253] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[15:10:26.253] <TB2> INFO: ----------------------------------------------------------------------
[15:10:26.515] <TB2> INFO: Expecting 41600 events.
[15:10:30.332] <TB2> INFO: 41600 events read in total (3258ms).
[15:10:30.381] <TB2> INFO: Test took 4126ms.
[15:10:30.618] <TB2> INFO: PixTestAlive::aliveTest() done
[15:10:30.618] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 1 0 0 0 0 0 0 0 0 0 0 1 9
[15:10:30.619] <TB2> INFO: ----------------------------------------------------------------------
[15:10:30.619] <TB2> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[15:10:30.619] <TB2> INFO: ----------------------------------------------------------------------
[15:10:30.879] <TB2> INFO: Expecting 41600 events.
[15:10:33.815] <TB2> INFO: 41600 events read in total (2379ms).
[15:10:33.815] <TB2> INFO: Test took 3194ms.
[15:10:33.815] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[15:10:34.077] <TB2> INFO: PixTestAlive::maskTest() done
[15:10:34.077] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[15:10:34.078] <TB2> INFO: ----------------------------------------------------------------------
[15:10:34.078] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[15:10:34.078] <TB2> INFO: ----------------------------------------------------------------------
[15:10:34.350] <TB2> INFO: Expecting 41600 events.
[15:10:38.140] <TB2> INFO: 41600 events read in total (3232ms).
[15:10:38.140] <TB2> INFO: Test took 4059ms.
[15:10:38.387] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[15:10:38.388] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[15:10:38.388] <TB2> INFO: PixTestAlive::doTest() done, duration: 12 seconds
[15:10:38.420] <TB2> INFO: enter test to run
[15:10:38.420] <TB2> INFO: test: no parameter change
[15:10:38.581] <TB2> QUIET: Connection to board 162 closed.
[15:10:38.660] <TB2> INFO: pXar: this is the end, my friend

[15:15:29.725] <TB2> INFO: *** Welcome to pxar ***
[15:15:29.725] <TB2> INFO: *** Today: 2016/02/08
[15:15:29.790] <TB2> INFO: *** Version: 9751
[15:15:29.790] <TB2> INFO: readRocDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//dacParameters35_C15.dat
[15:15:29.791] <TB2> INFO: readTbmDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[15:15:29.791] <TB2> INFO: readMaskFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//defaultMaskFile.dat
[15:15:29.791] <TB2> INFO: readTrimFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C15.dat
[15:15:29.862] <TB2> INFO: clk: 4
[15:15:29.862] <TB2> INFO: ctr: 4
[15:15:29.862] <TB2> INFO: sda: 19
[15:15:29.862] <TB2> INFO: tin: 9
[15:15:29.862] <TB2> INFO: level: 15
[15:15:29.862] <TB2> INFO: triggerdelay: 0
[15:15:29.862] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[15:15:29.862] <TB2> INFO: Log level: INFO
[15:15:29.874] <TB2> INFO: Found DTB DTB_WXENWR
[15:15:29.886] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[15:15:29.888] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[15:15:29.890] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[15:15:31.457] <TB2> INFO: DUT info:
[15:15:31.457] <TB2> INFO: The DUT currently contains the following objects:
[15:15:31.457] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[15:15:31.458] <TB2> INFO: TBM Core alpha (0): 7 registers set
[15:15:31.458] <TB2> INFO: TBM Core beta (1): 7 registers set
[15:15:31.458] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[15:15:31.458] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.458] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[15:15:31.858] <TB2> INFO: enter 'restricted' command line mode
[15:15:31.858] <TB2> INFO: enter test to run
[15:15:31.858] <TB2> INFO: test: delay setting parameters: ->5<-
[15:15:31.858] <TB2> INFO: delay test by 5 seconds...
[15:15:36.859] <TB2> INFO: enter test to run
[15:15:36.859] <TB2> INFO: test: highrate no parameter change
[15:15:36.859] <TB2> INFO: running: highrate
[15:15:36.859] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[15:15:37.051] <TB2> INFO: ----------------------------------------------------------------------
[15:15:37.051] <TB2> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[15:15:37.051] <TB2> INFO: ----------------------------------------------------------------------
[15:15:37.051] <TB2> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[15:15:37.051] <TB2> INFO: edge/corner pixel THR is adjusted
[15:15:37.051] <TB2> INFO: PixTestHighRate::trimHotPixels: step 0...
[15:15:37.772] <TB2> INFO: Collecting data for 1 seconds...
[15:15:38.773] <TB2> INFO: Done with hot pixel readout
[15:15:46.181] <TB2> INFO: PixTest:: pg_setup set to default.
[15:15:46.182] <TB2> INFO: 10 hot pixels found in step 0
[15:15:46.909] <TB2> INFO: Collecting data for 1 seconds...
[15:15:47.910] <TB2> INFO: Done with hot pixel readout
[15:15:55.046] <TB2> INFO: PixTest:: pg_setup set to default.
[15:15:55.047] <TB2> INFO: 7 hot pixels found in step 1
[15:15:55.772] <TB2> INFO: Collecting data for 1 seconds...
[15:15:56.773] <TB2> INFO: Done with hot pixel readout
[15:16:03.984] <TB2> INFO: PixTest:: pg_setup set to default.
[15:16:03.984] <TB2> INFO: 1 hot pixels found in step 2
[15:16:04.709] <TB2> INFO: Collecting data for 1 seconds...
[15:16:05.710] <TB2> INFO: Done with hot pixel readout
[15:16:13.461] <TB2> INFO: PixTest:: pg_setup set to default.
[15:16:13.462] <TB2> INFO: 0 hot pixels found in step 3
[15:16:13.475] <TB2> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[15:16:13.520] <TB2> INFO: PixTest::trimHotPixels() done
[15:16:13.520] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C0.dat
[15:16:13.529] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C1.dat
[15:16:13.540] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C2.dat
[15:16:13.548] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C3.dat
[15:16:13.554] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C4.dat
[15:16:13.560] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C5.dat
[15:16:13.566] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C6.dat
[15:16:13.573] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C7.dat
[15:16:13.579] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C8.dat
[15:16:13.585] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C9.dat
[15:16:13.591] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C10.dat
[15:16:13.604] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C11.dat
[15:16:13.617] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C12.dat
[15:16:13.630] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C13.dat
[15:16:13.643] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C14.dat
[15:16:13.656] <TB2> INFO: write trim parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//trimParameters35_C15.dat
[15:16:13.669] <TB2> INFO: write masked pixels into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//002_RetrimHotPixels_150//defaultMaskFile.dat
[15:16:13.721] <TB2> INFO: enter test to run
[15:16:13.721] <TB2> INFO: test: no parameter change
[15:16:13.915] <TB2> QUIET: Connection to board 162 closed.
[15:16:13.994] <TB2> INFO: pXar: this is the end, my friend

[15:16:35.865] <TB2> INFO: *** Welcome to pxar ***
[15:16:35.865] <TB2> INFO: *** Today: 2016/02/08
[15:16:35.968] <TB2> INFO: *** Version: 9751
[15:16:35.968] <TB2> INFO: readRocDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//003_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//003_HRData_50//dacParameters35_C15.dat
[15:16:35.968] <TB2> INFO: readTbmDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//003_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//003_HRData_50//tbmParameters_C0b.dat
[15:16:35.969] <TB2> INFO: readMaskFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//003_HRData_50//defaultMaskFile.dat
[15:16:35.969] <TB2> INFO: readTrimFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//003_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//003_HRData_50//trimParameters35_C15.dat
[15:16:36.041] <TB2> INFO: clk: 4
[15:16:36.041] <TB2> INFO: ctr: 4
[15:16:36.041] <TB2> INFO: sda: 19
[15:16:36.041] <TB2> INFO: tin: 9
[15:16:36.041] <TB2> INFO: level: 15
[15:16:36.041] <TB2> INFO: triggerdelay: 0
[15:16:36.041] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[15:16:36.041] <TB2> INFO: Log level: INFO
[15:16:36.054] <TB2> INFO: Found DTB DTB_WXENWR
[15:16:36.066] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[15:16:36.068] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[15:16:36.070] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[15:16:37.623] <TB2> INFO: DUT info:
[15:16:37.623] <TB2> INFO: The DUT currently contains the following objects:
[15:16:37.623] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[15:16:37.623] <TB2> INFO: TBM Core alpha (0): 7 registers set
[15:16:37.623] <TB2> INFO: TBM Core beta (1): 7 registers set
[15:16:37.623] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[15:16:37.623] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:37.623] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:38.024] <TB2> INFO: enter 'restricted' command line mode
[15:16:38.025] <TB2> INFO: enter test to run
[15:16:38.025] <TB2> INFO: test: delay setting parameters: ->5<-
[15:16:38.025] <TB2> INFO: delay test by 5 seconds...
[15:16:43.025] <TB2> INFO: enter test to run
[15:16:43.025] <TB2> INFO: test: Xray no parameter change
[15:16:43.025] <TB2> INFO: running: xray
[15:16:43.025] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//003_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//003_HRData_50//phCalibrationFitErr35_C15.dat
[15:16:43.199] <TB2> INFO: ######################################################################
[15:16:43.200] <TB2> INFO: PixTestXray::doTest()
[15:16:43.200] <TB2> INFO: ######################################################################
[15:16:43.200] <TB2> INFO: ----------------------------------------------------------------------
[15:16:43.200] <TB2> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[15:16:43.200] <TB2> INFO: ----------------------------------------------------------------------
[15:16:43.929] <TB2> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[15:16:50.147] <TB2> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[15:17:18.173] <TB2> INFO: Resuming triggers.
[15:17:24.404] <TB2> INFO: run duration 12 seconds, buffer almost full (81%), pausing triggers.
[15:17:51.881] <TB2> INFO: Resuming triggers.
[15:17:58.114] <TB2> INFO: run duration 18 seconds, buffer almost full (81%), pausing triggers.
[15:18:25.901] <TB2> INFO: Resuming triggers.
[15:18:32.134] <TB2> INFO: run duration 24 seconds, buffer almost full (81%), pausing triggers.
[15:18:59.740] <TB2> INFO: Resuming triggers.
[15:19:05.969] <TB2> INFO: run duration 31 seconds, buffer almost full (81%), pausing triggers.
[15:19:33.649] <TB2> INFO: Resuming triggers.
[15:19:39.879] <TB2> INFO: run duration 37 seconds, buffer almost full (81%), pausing triggers.
[15:20:07.345] <TB2> INFO: Resuming triggers.
[15:20:13.575] <TB2> INFO: run duration 43 seconds, buffer almost full (81%), pausing triggers.
[15:20:41.018] <TB2> INFO: Resuming triggers.
[15:20:47.244] <TB2> INFO: run duration 49 seconds, buffer almost full (81%), pausing triggers.
[15:21:14.551] <TB2> INFO: Resuming triggers.
[15:21:20.771] <TB2> INFO: run duration 56 seconds, buffer almost full (81%), pausing triggers.
[15:21:48.265] <TB2> INFO: Resuming triggers.
[15:21:54.486] <TB2> INFO: run duration 62 seconds, buffer almost full (81%), pausing triggers.
[15:22:22.110] <TB2> INFO: Resuming triggers.
[15:22:28.331] <TB2> INFO: run duration 68 seconds, buffer almost full (81%), pausing triggers.
[15:22:56.311] <TB2> INFO: Resuming triggers.
[15:23:02.538] <TB2> INFO: run duration 74 seconds, buffer almost full (81%), pausing triggers.
[15:23:29.779] <TB2> INFO: Resuming triggers.
[15:23:36.001] <TB2> INFO: run duration 80 seconds, buffer almost full (81%), pausing triggers.
[15:24:03.990] <TB2> INFO: Resuming triggers.
[15:24:10.213] <TB2> INFO: run duration 87 seconds, buffer almost full (81%), pausing triggers.
[15:24:37.862] <TB2> INFO: Resuming triggers.
[15:24:44.083] <TB2> INFO: run duration 93 seconds, buffer almost full (81%), pausing triggers.
[15:25:12.379] <TB2> INFO: Resuming triggers.
[15:25:18.601] <TB2> INFO: run duration 99 seconds, buffer almost full (81%), pausing triggers.
[15:25:47.503] <TB2> INFO: Resuming triggers.
[15:25:47.945] <TB2> INFO: data taking finished, elapsed time: 100 seconds.
[15:25:50.572] <TB2> INFO: PixTest:: pg_setup set to default.
[15:25:50.573] <TB2> INFO: PixTestXray::doPhRun() done
[15:25:50.573] <TB2> INFO: PixTestXray::doTest() done
[15:25:50.754] <TB2> INFO: enter test to run
[15:25:50.754] <TB2> INFO: test: no parameter change
[15:25:50.969] <TB2> QUIET: Connection to board 162 closed.
[15:25:51.048] <TB2> INFO: pXar: this is the end, my friend

[15:26:09.738] <TB2> INFO: *** Welcome to pxar ***
[15:26:09.738] <TB2> INFO: *** Today: 2016/02/08
[15:26:09.806] <TB2> INFO: *** Version: 9751
[15:26:09.806] <TB2> INFO: readRocDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//004_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//004_HRData_150//dacParameters35_C15.dat
[15:26:09.807] <TB2> INFO: readTbmDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//004_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//004_HRData_150//tbmParameters_C0b.dat
[15:26:09.807] <TB2> INFO: readMaskFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//004_HRData_150//defaultMaskFile.dat
[15:26:09.807] <TB2> INFO: readTrimFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//004_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//004_HRData_150//trimParameters35_C15.dat
[15:26:09.885] <TB2> INFO: clk: 4
[15:26:09.885] <TB2> INFO: ctr: 4
[15:26:09.885] <TB2> INFO: sda: 19
[15:26:09.885] <TB2> INFO: tin: 9
[15:26:09.885] <TB2> INFO: level: 15
[15:26:09.885] <TB2> INFO: triggerdelay: 0
[15:26:09.885] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[15:26:09.885] <TB2> INFO: Log level: INFO
[15:26:09.899] <TB2> INFO: Found DTB DTB_WXENWR
[15:26:09.910] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[15:26:09.912] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[15:26:09.914] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[15:26:11.492] <TB2> INFO: DUT info:
[15:26:11.492] <TB2> INFO: The DUT currently contains the following objects:
[15:26:11.492] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[15:26:11.492] <TB2> INFO: TBM Core alpha (0): 7 registers set
[15:26:11.493] <TB2> INFO: TBM Core beta (1): 7 registers set
[15:26:11.493] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[15:26:11.493] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.493] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:11.893] <TB2> INFO: enter 'restricted' command line mode
[15:26:11.893] <TB2> INFO: enter test to run
[15:26:11.893] <TB2> INFO: test: delay setting parameters: ->5<-
[15:26:11.893] <TB2> INFO: delay test by 5 seconds...
[15:26:16.894] <TB2> INFO: enter test to run
[15:26:16.894] <TB2> INFO: test: Xray no parameter change
[15:26:16.894] <TB2> INFO: running: xray
[15:26:16.894] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//004_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//004_HRData_150//phCalibrationFitErr35_C15.dat
[15:26:17.028] <TB2> INFO: ######################################################################
[15:26:17.028] <TB2> INFO: PixTestXray::doTest()
[15:26:17.028] <TB2> INFO: ######################################################################
[15:26:17.028] <TB2> INFO: ----------------------------------------------------------------------
[15:26:17.028] <TB2> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[15:26:17.028] <TB2> INFO: ----------------------------------------------------------------------
[15:26:17.755] <TB2> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[15:26:21.058] <TB2> INFO: run duration 3 seconds, buffer almost full (81%), pausing triggers.
[15:26:49.955] <TB2> INFO: Resuming triggers.
[15:26:53.281] <TB2> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[15:27:22.700] <TB2> INFO: Resuming triggers.
[15:27:26.021] <TB2> INFO: run duration 9 seconds, buffer almost full (81%), pausing triggers.
[15:27:54.710] <TB2> INFO: Resuming triggers.
[15:27:58.032] <TB2> INFO: run duration 13 seconds, buffer almost full (81%), pausing triggers.
[15:28:26.559] <TB2> INFO: Resuming triggers.
[15:28:29.880] <TB2> INFO: run duration 16 seconds, buffer almost full (81%), pausing triggers.
[15:28:58.544] <TB2> INFO: Resuming triggers.
[15:29:01.865] <TB2> INFO: run duration 19 seconds, buffer almost full (81%), pausing triggers.
[15:29:30.110] <TB2> INFO: Resuming triggers.
[15:29:33.428] <TB2> INFO: run duration 23 seconds, buffer almost full (81%), pausing triggers.
[15:30:02.334] <TB2> INFO: Resuming triggers.
[15:30:05.649] <TB2> INFO: run duration 26 seconds, buffer almost full (81%), pausing triggers.
[15:30:33.419] <TB2> INFO: Resuming triggers.
[15:30:36.735] <TB2> INFO: run duration 29 seconds, buffer almost full (81%), pausing triggers.
[15:31:04.992] <TB2> INFO: Resuming triggers.
[15:31:08.321] <TB2> INFO: run duration 33 seconds, buffer almost full (81%), pausing triggers.
[15:31:36.784] <TB2> INFO: Resuming triggers.
[15:31:40.097] <TB2> INFO: run duration 36 seconds, buffer almost full (81%), pausing triggers.
[15:32:08.399] <TB2> INFO: Resuming triggers.
[15:32:11.711] <TB2> INFO: run duration 39 seconds, buffer almost full (81%), pausing triggers.
[15:32:40.320] <TB2> INFO: Resuming triggers.
[15:32:43.634] <TB2> INFO: run duration 43 seconds, buffer almost full (81%), pausing triggers.
[15:33:12.180] <TB2> INFO: Resuming triggers.
[15:33:15.491] <TB2> INFO: run duration 46 seconds, buffer almost full (81%), pausing triggers.
[15:33:44.004] <TB2> INFO: Resuming triggers.
[15:33:47.314] <TB2> INFO: run duration 49 seconds, buffer almost full (81%), pausing triggers.
[15:34:15.638] <TB2> INFO: Resuming triggers.
[15:34:18.947] <TB2> INFO: run duration 53 seconds, buffer almost full (81%), pausing triggers.
[15:34:47.771] <TB2> INFO: Resuming triggers.
[15:34:51.078] <TB2> INFO: run duration 56 seconds, buffer almost full (81%), pausing triggers.
[15:35:19.819] <TB2> INFO: Resuming triggers.
[15:35:23.129] <TB2> INFO: run duration 59 seconds, buffer almost full (81%), pausing triggers.
[15:35:51.435] <TB2> INFO: Resuming triggers.
[15:35:54.738] <TB2> INFO: run duration 62 seconds, buffer almost full (81%), pausing triggers.
[15:36:23.106] <TB2> INFO: Resuming triggers.
[15:36:26.412] <TB2> INFO: run duration 66 seconds, buffer almost full (81%), pausing triggers.
[15:36:54.883] <TB2> INFO: Resuming triggers.
[15:36:58.188] <TB2> INFO: run duration 69 seconds, buffer almost full (81%), pausing triggers.
[15:37:26.880] <TB2> INFO: Resuming triggers.
[15:37:30.184] <TB2> INFO: run duration 72 seconds, buffer almost full (81%), pausing triggers.
[15:37:59.172] <TB2> INFO: Resuming triggers.
[15:38:02.477] <TB2> INFO: run duration 76 seconds, buffer almost full (81%), pausing triggers.
[15:38:30.881] <TB2> INFO: Resuming triggers.
[15:38:34.184] <TB2> INFO: run duration 79 seconds, buffer almost full (81%), pausing triggers.
[15:39:02.958] <TB2> INFO: Resuming triggers.
[15:39:06.263] <TB2> INFO: run duration 82 seconds, buffer almost full (81%), pausing triggers.
[15:39:34.688] <TB2> INFO: Resuming triggers.
[15:39:37.993] <TB2> INFO: run duration 86 seconds, buffer almost full (81%), pausing triggers.
[15:40:06.943] <TB2> INFO: Resuming triggers.
[15:40:10.246] <TB2> INFO: run duration 89 seconds, buffer almost full (81%), pausing triggers.
[15:40:40.505] <TB2> INFO: Resuming triggers.
[15:40:43.807] <TB2> INFO: run duration 92 seconds, buffer almost full (81%), pausing triggers.
[15:41:13.737] <TB2> INFO: Resuming triggers.
[15:41:17.040] <TB2> INFO: run duration 95 seconds, buffer almost full (81%), pausing triggers.
[15:41:46.941] <TB2> INFO: Resuming triggers.
[15:41:50.242] <TB2> INFO: run duration 99 seconds, buffer almost full (81%), pausing triggers.
[15:42:21.685] <TB2> INFO: Resuming triggers.
[15:42:22.416] <TB2> INFO: data taking finished, elapsed time: 100 seconds.
[15:42:28.985] <TB2> INFO: PixTest:: pg_setup set to default.
[15:42:28.986] <TB2> INFO: PixTestXray::doPhRun() done
[15:42:28.986] <TB2> INFO: PixTestXray::doTest() done
[15:42:29.174] <TB2> INFO: enter test to run
[15:42:29.174] <TB2> INFO: test: no parameter change
[15:42:29.370] <TB2> QUIET: Connection to board 162 closed.
[15:42:29.450] <TB2> INFO: pXar: this is the end, my friend

[15:43:13.981] <TB2> INFO: *** Welcome to pxar ***
[15:43:13.981] <TB2> INFO: *** Today: 2016/02/08
[15:43:14.048] <TB2> INFO: *** Version: 9751
[15:43:14.048] <TB2> INFO: readRocDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//005_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//005_HRSCurves_100//dacParameters35_C15.dat
[15:43:14.048] <TB2> INFO: readTbmDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//005_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//005_HRSCurves_100//tbmParameters_C0b.dat
[15:43:14.048] <TB2> INFO: readMaskFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//005_HRSCurves_100//defaultMaskFile.dat
[15:43:14.048] <TB2> INFO: readTrimFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//005_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//005_HRSCurves_100//trimParameters35_C15.dat
[15:43:14.118] <TB2> INFO: clk: 4
[15:43:14.119] <TB2> INFO: ctr: 4
[15:43:14.119] <TB2> INFO: sda: 19
[15:43:14.119] <TB2> INFO: tin: 9
[15:43:14.119] <TB2> INFO: level: 15
[15:43:14.119] <TB2> INFO: triggerdelay: 0
[15:43:14.119] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[15:43:14.119] <TB2> INFO: Log level: INFO
[15:43:14.132] <TB2> INFO: Found DTB DTB_WXENWR
[15:43:14.143] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[15:43:14.145] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[15:43:14.147] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[15:43:15.696] <TB2> INFO: DUT info:
[15:43:15.697] <TB2> INFO: The DUT currently contains the following objects:
[15:43:15.697] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[15:43:15.697] <TB2> INFO: TBM Core alpha (0): 7 registers set
[15:43:15.697] <TB2> INFO: TBM Core beta (1): 7 registers set
[15:43:15.697] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[15:43:15.697] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:15.697] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:16.098] <TB2> INFO: enter 'restricted' command line mode
[15:43:16.098] <TB2> INFO: enter test to run
[15:43:16.099] <TB2> INFO: test: Highrate no parameter change
[15:43:16.099] <TB2> INFO: running: highrate
[15:43:16.099] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//005_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//005_HRSCurves_100//phCalibrationFitErr35_C15.dat
[15:43:16.268] <TB2> INFO: ----------------------------------------------------------------------
[15:43:16.268] <TB2> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[15:43:16.268] <TB2> INFO: ----------------------------------------------------------------------
[15:43:16.275] <TB2> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 15 .. 75 (20/-1) hits flags = 896 (plus default)
[15:43:16.286] <TB2> INFO: dacScan step from 15 .. 34
[15:43:16.286] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[15:43:16.286] <TB2> INFO: run 1 of 1
[15:43:16.772] <TB2> INFO: Expecting 4160000 events.
[15:43:50.978] <TB2> INFO: 421300 events read in total (33803ms).
[15:44:24.682] <TB2> INFO: 845450 events read in total (67506ms).
[15:44:57.666] <TB2> INFO: 1269600 events read in total (100490ms).
[15:45:31.003] <TB2> INFO: 1693700 events read in total (133827ms).
[15:46:04.048] <TB2> INFO: 2118050 events read in total (166872ms).
[15:46:37.310] <TB2> INFO: 2542250 events read in total (200134ms).
[15:47:10.526] <TB2> INFO: 2966300 events read in total (233350ms).
[15:47:43.944] <TB2> INFO: 3390100 events read in total (266768ms).
[15:48:17.167] <TB2> INFO: 3813450 events read in total (299991ms).
[15:48:44.742] <TB2> INFO: 4160000 events read in total (327566ms).
[15:48:45.058] <TB2> INFO: Test took 328772ms.
[15:48:57.214] <TB2> INFO: dacScan step from 35 .. 54
[15:48:57.214] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[15:48:57.214] <TB2> INFO: run 1 of 1
[15:48:57.734] <TB2> INFO: Expecting 4160000 events.
[15:49:29.979] <TB2> INFO: 360950 events read in total (31836ms).
[15:50:02.193] <TB2> INFO: 722950 events read in total (64050ms).
[15:50:35.135] <TB2> INFO: 1084000 events read in total (96992ms).
[15:51:07.427] <TB2> INFO: 1444250 events read in total (129284ms).
[15:51:39.562] <TB2> INFO: 1803400 events read in total (161419ms).
[15:52:11.377] <TB2> INFO: 2161050 events read in total (193234ms).
[15:52:43.044] <TB2> INFO: 2516100 events read in total (224901ms).
[15:53:15.098] <TB2> INFO: 2868850 events read in total (256955ms).
[15:53:47.146] <TB2> INFO: 3218950 events read in total (289003ms).
[15:54:19.331] <TB2> INFO: 3566500 events read in total (321188ms).
[15:54:51.586] <TB2> INFO: 3912900 events read in total (353443ms).
[15:55:14.071] <TB2> INFO: 4160000 events read in total (375928ms).
[15:55:14.354] <TB2> INFO: Test took 377140ms.
[15:55:23.969] <TB2> INFO: dacScan step from 55 .. 74
[15:55:23.970] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[15:55:23.970] <TB2> INFO: run 1 of 1
[15:55:24.453] <TB2> INFO: Expecting 4160000 events.
[15:55:55.816] <TB2> INFO: 319400 events read in total (30960ms).
[15:56:27.220] <TB2> INFO: 639650 events read in total (62364ms).
[15:56:58.090] <TB2> INFO: 959950 events read in total (93234ms).
[15:57:29.424] <TB2> INFO: 1280300 events read in total (124568ms).
[15:58:00.726] <TB2> INFO: 1600500 events read in total (155870ms).
[15:58:31.767] <TB2> INFO: 1920750 events read in total (186911ms).
[15:59:02.345] <TB2> INFO: 2241050 events read in total (217489ms).
[15:59:33.106] <TB2> INFO: 2561250 events read in total (248250ms).
[16:00:04.243] <TB2> INFO: 2881550 events read in total (279387ms).
[16:00:36.167] <TB2> INFO: 3201850 events read in total (311311ms).
[16:01:07.854] <TB2> INFO: 3522400 events read in total (342998ms).
[16:01:39.537] <TB2> INFO: 3842600 events read in total (374681ms).
[16:02:10.948] <TB2> INFO: 4160000 events read in total (406092ms).
[16:02:11.173] <TB2> INFO: Test took 407203ms.
[16:02:19.952] <TB2> INFO: dacScan step from 75 .. 75
[16:02:19.952] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[16:02:19.952] <TB2> INFO: run 1 of 1
[16:02:20.434] <TB2> INFO: Expecting 208000 events.
[16:02:42.581] <TB2> INFO: 208000 events read in total (21745ms).
[16:02:42.589] <TB2> INFO: Test took 22637ms.
[16:02:42.970] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:44.148] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:45.214] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:46.294] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:47.365] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:48.443] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:49.541] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:50.627] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:51.728] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:52.817] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:53.928] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:55.013] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:56.095] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:57.153] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:58.174] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:59.191] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[16:03:00.219] <TB2> INFO: PixTest:: pg_setup set to default.
[16:03:00.221] <TB2> INFO: vcal mean: 38.31 38.99 38.23 41.69 41.64 43.30 43.20 44.25 44.07 42.66 43.10 41.99 42.08 38.95 40.04 39.21
[16:03:00.221] <TB2> INFO: vcal RMS: 1.07 1.12 0.91 1.44 1.17 1.36 1.45 1.49 1.64 1.58 1.52 1.56 1.37 1.26 1.25 1.77
[16:03:00.221] <TB2> INFO: number of X-ray hits detected: 187172 204576 194160 347256 331295 410425 416864 457541 487359 436283 424097 354447 360504 206150 235333 219438
[16:03:00.221] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:03:00.221] <TB2> INFO: X-ray hit rate [MHz/cm2]: 54.9 60.0 56.9 101.8 97.1 120.3 122.2 134.1 142.8 127.9 124.3 103.9 105.7 60.4 69.0 64.3
[16:03:00.221] <TB2> INFO: PixTestHighRate::doXNoiseMaps() done
[16:03:00.318] <TB2> INFO: enter test to run
[16:03:00.318] <TB2> INFO: test: no parameter change
[16:03:00.511] <TB2> QUIET: Connection to board 162 closed.
[16:03:00.590] <TB2> INFO: pXar: this is the end, my friend

[16:21:49.076] <TB2> INFO: *** Welcome to pxar ***
[16:21:49.076] <TB2> INFO: *** Today: 2016/02/08
[16:21:49.142] <TB2> INFO: *** Version: 9751
[16:21:49.142] <TB2> INFO: readRocDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[16:21:49.143] <TB2> INFO: readTbmDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[16:21:49.143] <TB2> INFO: readMaskFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[16:21:49.143] <TB2> INFO: readTrimFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[16:21:49.217] <TB2> INFO: clk: 4
[16:21:49.217] <TB2> INFO: ctr: 4
[16:21:49.217] <TB2> INFO: sda: 19
[16:21:49.217] <TB2> INFO: tin: 9
[16:21:49.217] <TB2> INFO: level: 15
[16:21:49.217] <TB2> INFO: triggerdelay: 0
[16:21:49.217] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[16:21:49.217] <TB2> INFO: Log level: INFO
[16:21:49.230] <TB2> INFO: Found DTB DTB_WXENWR
[16:21:49.242] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[16:21:49.244] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[16:21:49.246] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[16:21:50.799] <TB2> INFO: DUT info:
[16:21:50.799] <TB2> INFO: The DUT currently contains the following objects:
[16:21:50.799] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[16:21:50.799] <TB2> INFO: TBM Core alpha (0): 7 registers set
[16:21:50.799] <TB2> INFO: TBM Core beta (1): 7 registers set
[16:21:50.799] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:21:50.799] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:50.799] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:51.200] <TB2> INFO: enter 'restricted' command line mode
[16:21:51.200] <TB2> INFO: enter test to run
[16:21:51.200] <TB2> INFO: test: HighRate no parameter change
[16:21:51.200] <TB2> INFO: running: highrate
[16:21:51.200] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[16:21:51.393] <TB2> INFO: ----------------------------------------------------------------------
[16:21:51.393] <TB2> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[16:21:51.393] <TB2> INFO: ----------------------------------------------------------------------
[16:21:51.489] <TB2> INFO: Expecting 768 events.
[16:21:52.488] <TB2> INFO: 768 events read in total (440ms).
[16:21:52.552] <TB2> INFO: Test took 1154ms.
[16:21:53.041] <TB2> INFO: Expecting 41600 events.
[16:21:56.739] <TB2> INFO: 41600 events read in total (3296ms).
[16:21:56.740] <TB2> INFO: Test took 4182ms.
[16:21:57.369] <TB2> INFO: Expecting 41600 events.
[16:22:01.167] <TB2> INFO: 41600 events read in total (3396ms).
[16:22:01.169] <TB2> INFO: Test took 4301ms.
[16:22:01.768] <TB2> INFO: Expecting 41600 events.
[16:22:05.610] <TB2> INFO: 41600 events read in total (3439ms).
[16:22:05.648] <TB2> INFO: Test took 4364ms.
[16:22:06.250] <TB2> INFO: Expecting 41600 events.
[16:22:10.179] <TB2> INFO: 41600 events read in total (3527ms).
[16:22:10.180] <TB2> INFO: Test took 4416ms.
[16:22:10.782] <TB2> INFO: Expecting 41600 events.
[16:22:14.557] <TB2> INFO: 41600 events read in total (3372ms).
[16:22:14.559] <TB2> INFO: Test took 4258ms.
[16:22:15.154] <TB2> INFO: Expecting 41600 events.
[16:22:18.935] <TB2> INFO: 41600 events read in total (3379ms).
[16:22:18.937] <TB2> INFO: Test took 4265ms.
[16:22:19.530] <TB2> INFO: Expecting 41600 events.
[16:22:23.318] <TB2> INFO: 41600 events read in total (3386ms).
[16:22:23.319] <TB2> INFO: Test took 4271ms.
[16:22:23.929] <TB2> INFO: Expecting 41600 events.
[16:22:27.748] <TB2> INFO: 41600 events read in total (3416ms).
[16:22:27.750] <TB2> INFO: Test took 4317ms.
[16:22:28.346] <TB2> INFO: Expecting 41600 events.
[16:22:32.266] <TB2> INFO: 41600 events read in total (3517ms).
[16:22:32.268] <TB2> INFO: Test took 4407ms.
[16:22:32.920] <TB2> INFO: Expecting 41600 events.
[16:22:36.845] <TB2> INFO: 41600 events read in total (3522ms).
[16:22:36.846] <TB2> INFO: Test took 4443ms.
[16:22:37.486] <TB2> INFO: Expecting 41600 events.
[16:22:41.503] <TB2> INFO: 41600 events read in total (3615ms).
[16:22:41.505] <TB2> INFO: Test took 4522ms.
[16:22:42.113] <TB2> INFO: Expecting 41600 events.
[16:22:46.004] <TB2> INFO: 41600 events read in total (3489ms).
[16:22:46.007] <TB2> INFO: Test took 4376ms.
[16:22:46.627] <TB2> INFO: Expecting 41600 events.
[16:22:50.459] <TB2> INFO: 41600 events read in total (3430ms).
[16:22:50.461] <TB2> INFO: Test took 4343ms.
[16:22:51.055] <TB2> INFO: Expecting 41600 events.
[16:22:54.920] <TB2> INFO: 41600 events read in total (3462ms).
[16:22:54.922] <TB2> INFO: Test took 4349ms.
[16:22:55.563] <TB2> INFO: Expecting 41600 events.
[16:22:59.411] <TB2> INFO: 41600 events read in total (3446ms).
[16:22:59.413] <TB2> INFO: Test took 4367ms.
[16:23:00.046] <TB2> INFO: Expecting 41600 events.
[16:23:03.900] <TB2> INFO: 41600 events read in total (3452ms).
[16:23:03.901] <TB2> INFO: Test took 4360ms.
[16:23:04.499] <TB2> INFO: Expecting 41600 events.
[16:23:08.377] <TB2> INFO: 41600 events read in total (3476ms).
[16:23:08.379] <TB2> INFO: Test took 4364ms.
[16:23:08.973] <TB2> INFO: Expecting 41600 events.
[16:23:12.806] <TB2> INFO: 41600 events read in total (3430ms).
[16:23:12.807] <TB2> INFO: Test took 4316ms.
[16:23:13.405] <TB2> INFO: Expecting 41600 events.
[16:23:17.414] <TB2> INFO: 41600 events read in total (3607ms).
[16:23:17.416] <TB2> INFO: Test took 4493ms.
[16:23:18.004] <TB2> INFO: Expecting 41600 events.
[16:23:21.672] <TB2> INFO: 41600 events read in total (3265ms).
[16:23:21.674] <TB2> INFO: Test took 4149ms.
[16:23:22.044] <TB2> INFO: enter test to run
[16:23:22.044] <TB2> INFO: test: Pretest no parameter change
[16:23:22.044] <TB2> INFO: running: pretest
[16:23:22.044] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[16:23:22.044] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[16:23:22.044] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[16:23:22.044] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[16:23:22.044] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[16:23:22.045] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[16:23:22.045] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[16:23:22.045] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[16:23:22.045] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[16:23:22.045] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[16:23:22.045] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[16:23:22.045] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[16:23:22.045] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[16:23:22.045] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[16:23:22.045] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[16:23:22.045] <TB2> INFO: write dac parameters into /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[16:23:22.046] <TB2> INFO: enter test to run
[16:23:22.046] <TB2> INFO: test: no parameter change
[16:23:22.258] <TB2> QUIET: Connection to board 162 closed.
[16:23:22.337] <TB2> INFO: pXar: this is the end, my friend

[16:23:40.236] <TB2> INFO: *** Welcome to pxar ***
[16:23:40.236] <TB2> INFO: *** Today: 2016/02/08
[16:23:40.301] <TB2> INFO: *** Version: 9751
[16:23:40.301] <TB2> INFO: readRocDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//011_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//011_HREfficiency_50//dacParameters35_C15.dat
[16:23:40.302] <TB2> INFO: readTbmDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//011_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//011_HREfficiency_50//tbmParameters_C0b.dat
[16:23:40.302] <TB2> INFO: readMaskFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//011_HREfficiency_50//defaultMaskFile.dat
[16:23:40.302] <TB2> INFO: readTrimFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//011_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//011_HREfficiency_50//trimParameters35_C15.dat
[16:23:40.390] <TB2> INFO: clk: 4
[16:23:40.390] <TB2> INFO: ctr: 4
[16:23:40.390] <TB2> INFO: sda: 19
[16:23:40.390] <TB2> INFO: tin: 9
[16:23:40.390] <TB2> INFO: level: 15
[16:23:40.390] <TB2> INFO: triggerdelay: 0
[16:23:40.391] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[16:23:40.391] <TB2> INFO: Log level: INFO
[16:23:40.404] <TB2> INFO: Found DTB DTB_WXENWR
[16:23:40.415] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[16:23:40.417] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[16:23:40.419] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[16:23:41.970] <TB2> INFO: DUT info:
[16:23:41.970] <TB2> INFO: The DUT currently contains the following objects:
[16:23:41.970] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[16:23:41.970] <TB2> INFO: TBM Core alpha (0): 7 registers set
[16:23:41.970] <TB2> INFO: TBM Core beta (1): 7 registers set
[16:23:41.970] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:23:41.970] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.970] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.970] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.970] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.971] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.971] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.971] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.971] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.971] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.971] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.971] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.971] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.971] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.971] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.971] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:41.971] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:42.371] <TB2> INFO: enter 'restricted' command line mode
[16:23:42.371] <TB2> INFO: enter test to run
[16:23:42.371] <TB2> INFO: test: PixelAlive no parameter change
[16:23:42.372] <TB2> INFO: running: pixelalive
[16:23:42.377] <TB2> INFO: ######################################################################
[16:23:42.377] <TB2> INFO: PixTestAlive::doTest()
[16:23:42.377] <TB2> INFO: ######################################################################
[16:23:42.378] <TB2> INFO: ----------------------------------------------------------------------
[16:23:42.378] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:23:42.378] <TB2> INFO: ----------------------------------------------------------------------
[16:23:42.659] <TB2> INFO: Expecting 208000 events.
[16:23:54.210] <TB2> INFO: 208000 events read in total (10992ms).
[16:23:54.212] <TB2> INFO: Test took 11831ms.
[16:23:54.455] <TB2> INFO: PixTestAlive::aliveTest() done
[16:23:54.455] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4
[16:23:54.457] <TB2> INFO: ----------------------------------------------------------------------
[16:23:54.457] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:23:54.457] <TB2> INFO: ----------------------------------------------------------------------
[16:23:54.717] <TB2> INFO: Expecting 208000 events.
[16:24:02.040] <TB2> INFO: 208000 events read in total (6765ms).
[16:24:02.041] <TB2> INFO: Test took 7582ms.
[16:24:02.041] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[16:24:02.298] <TB2> INFO: PixTestAlive::maskTest() done
[16:24:02.298] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[16:24:02.299] <TB2> INFO: ----------------------------------------------------------------------
[16:24:02.299] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:24:02.299] <TB2> INFO: ----------------------------------------------------------------------
[16:24:02.571] <TB2> INFO: Expecting 208000 events.
[16:24:13.828] <TB2> INFO: 208000 events read in total (10700ms).
[16:24:13.829] <TB2> INFO: Test took 11527ms.
[16:24:14.045] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[16:24:14.045] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[16:24:14.045] <TB2> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[16:24:14.074] <TB2> INFO: enter test to run
[16:24:14.074] <TB2> INFO: test: delay setting parameters: ->2<-
[16:24:14.074] <TB2> INFO: delay test by 2 seconds...
[16:24:16.075] <TB2> INFO: enter test to run
[16:24:16.075] <TB2> INFO: test: HighRate no parameter change
[16:24:16.075] <TB2> INFO: running: highrate
[16:24:16.075] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//011_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//011_HREfficiency_50//phCalibrationFitErr35_C15.dat
[16:24:16.238] <TB2> INFO: ----------------------------------------------------------------------
[16:24:16.238] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:24:16.238] <TB2> INFO: ----------------------------------------------------------------------
[16:24:16.733] <TB2> INFO: Expecting 208000 events.
[16:24:32.894] <TB2> INFO: 208000 events read in total (15759ms).
[16:24:32.900] <TB2> INFO: Test took 16658ms.
[16:24:33.462] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5
[16:24:33.462] <TB2> INFO: number of red-efficiency pixels: 115 136 121 279 243 358 334 396 413 358 360 283 319 156 158 125
[16:24:33.462] <TB2> INFO: number of X-ray hits detected: 91469 100263 93781 174471 164298 208205 210872 231752 245759 218898 214134 176007 180911 100203 116674 109818
[16:24:33.462] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:24:33.462] <TB2> INFO: number of Vcal hits detected: 207883 207863 207878 207711 207742 207626 207640 207579 207568 207626 207622 207704 207665 207837 207841 207629
[16:24:33.462] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 100.0 99.9 99.9 99.8 99.8 99.8 99.8 99.8 99.8 99.9 99.8 99.9 99.9 99.9
[16:24:33.462] <TB2> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.9 99.9 99.8 99.8 99.8 99.8 99.8 99.8 99.9 99.8 99.9 99.9 99.8
[16:24:33.462] <TB2> INFO: X-ray hit rate [MHz/cm2]: 26.8 29.4 27.5 51.1 48.2 61.0 61.8 67.9 72.0 64.2 62.8 51.6 53.0 29.4 34.2 32.2
[16:24:33.462] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[16:24:33.507] <TB2> INFO: PixTest:: pg_setup set to default.
[16:24:33.516] <TB2> INFO: enter test to run
[16:24:33.516] <TB2> INFO: test: no parameter change
[16:24:33.718] <TB2> QUIET: Connection to board 162 closed.
[16:24:33.798] <TB2> INFO: pXar: this is the end, my friend

[16:24:54.869] <TB2> INFO: *** Welcome to pxar ***
[16:24:54.869] <TB2> INFO: *** Today: 2016/02/08
[16:24:54.932] <TB2> INFO: *** Version: 9751
[16:24:54.932] <TB2> INFO: readRocDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//012_HREfficiency_75//dacParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//012_HREfficiency_75//dacParameters35_C15.dat
[16:24:54.933] <TB2> INFO: readTbmDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//012_HREfficiency_75//tbmParameters_C0a.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//012_HREfficiency_75//tbmParameters_C0b.dat
[16:24:54.933] <TB2> INFO: readMaskFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//012_HREfficiency_75//defaultMaskFile.dat
[16:24:54.933] <TB2> INFO: readTrimFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//012_HREfficiency_75//trimParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//012_HREfficiency_75//trimParameters35_C15.dat
[16:24:55.015] <TB2> INFO: clk: 4
[16:24:55.015] <TB2> INFO: ctr: 4
[16:24:55.015] <TB2> INFO: sda: 19
[16:24:55.015] <TB2> INFO: tin: 9
[16:24:55.015] <TB2> INFO: level: 15
[16:24:55.016] <TB2> INFO: triggerdelay: 0
[16:24:55.016] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[16:24:55.016] <TB2> INFO: Log level: INFO
[16:24:55.028] <TB2> INFO: Found DTB DTB_WXENWR
[16:24:55.039] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[16:24:55.042] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[16:24:55.043] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[16:24:56.581] <TB2> INFO: DUT info:
[16:24:56.581] <TB2> INFO: The DUT currently contains the following objects:
[16:24:56.581] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[16:24:56.581] <TB2> INFO: TBM Core alpha (0): 7 registers set
[16:24:56.581] <TB2> INFO: TBM Core beta (1): 7 registers set
[16:24:56.581] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:24:56.581] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.581] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.581] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.581] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.581] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.581] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.581] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.582] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.582] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.582] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.582] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.582] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.582] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.582] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.582] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.582] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.983] <TB2> INFO: enter 'restricted' command line mode
[16:24:56.983] <TB2> INFO: enter test to run
[16:24:56.983] <TB2> INFO: test: PixelAlive no parameter change
[16:24:56.983] <TB2> INFO: running: pixelalive
[16:24:56.988] <TB2> INFO: ######################################################################
[16:24:56.988] <TB2> INFO: PixTestAlive::doTest()
[16:24:56.989] <TB2> INFO: ######################################################################
[16:24:56.990] <TB2> INFO: ----------------------------------------------------------------------
[16:24:56.990] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:24:56.990] <TB2> INFO: ----------------------------------------------------------------------
[16:24:57.289] <TB2> INFO: Expecting 208000 events.
[16:25:08.955] <TB2> INFO: 208000 events read in total (11106ms).
[16:25:08.957] <TB2> INFO: Test took 11965ms.
[16:25:09.199] <TB2> INFO: PixTestAlive::aliveTest() done
[16:25:09.199] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5
[16:25:09.200] <TB2> INFO: ----------------------------------------------------------------------
[16:25:09.200] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:25:09.201] <TB2> INFO: ----------------------------------------------------------------------
[16:25:09.473] <TB2> INFO: Expecting 208000 events.
[16:25:16.975] <TB2> INFO: 208000 events read in total (6944ms).
[16:25:16.976] <TB2> INFO: Test took 7773ms.
[16:25:16.977] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[16:25:17.235] <TB2> INFO: PixTestAlive::maskTest() done
[16:25:17.235] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[16:25:17.237] <TB2> INFO: ----------------------------------------------------------------------
[16:25:17.237] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:25:17.237] <TB2> INFO: ----------------------------------------------------------------------
[16:25:17.520] <TB2> INFO: Expecting 208000 events.
[16:25:28.906] <TB2> INFO: 208000 events read in total (10829ms).
[16:25:28.906] <TB2> INFO: Test took 11667ms.
[16:25:29.122] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[16:25:29.122] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[16:25:29.122] <TB2> INFO: PixTestAlive::doTest() done, duration: 32 seconds
[16:25:29.158] <TB2> INFO: enter test to run
[16:25:29.158] <TB2> INFO: test: delay setting parameters: ->2<-
[16:25:29.158] <TB2> INFO: delay test by 2 seconds...
[16:25:31.158] <TB2> INFO: enter test to run
[16:25:31.158] <TB2> INFO: test: HighRate no parameter change
[16:25:31.158] <TB2> INFO: running: highrate
[16:25:31.158] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//012_HREfficiency_75//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//012_HREfficiency_75//phCalibrationFitErr35_C15.dat
[16:25:31.324] <TB2> INFO: ----------------------------------------------------------------------
[16:25:31.324] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:25:31.324] <TB2> INFO: ----------------------------------------------------------------------
[16:25:31.841] <TB2> INFO: Expecting 208000 events.
[16:25:50.619] <TB2> INFO: 208000 events read in total (18376ms).
[16:25:50.627] <TB2> INFO: Test took 19298ms.
[16:25:51.367] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5
[16:25:51.367] <TB2> INFO: number of red-efficiency pixels: 243 175 248 565 435 726 709 829 891 763 709 535 607 247 287 225
[16:25:51.367] <TB2> INFO: number of X-ray hits detected: 135617 147099 140013 255976 241004 303078 307013 337135 356557 318980 311596 258322 265497 147850 171512 160720
[16:25:51.367] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:25:51.367] <TB2> INFO: number of Vcal hits detected: 207749 207821 207732 207367 207517 207145 207154 207058 206952 207098 207184 207388 207317 207725 207706 207521
[16:25:51.367] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.7 99.8 99.7 99.6 99.6 99.5 99.6 99.7 99.7 99.7 99.9 99.9 99.9
[16:25:51.368] <TB2> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.7 99.8 99.6 99.6 99.5 99.5 99.6 99.6 99.7 99.7 99.9 99.9 99.8
[16:25:51.368] <TB2> INFO: X-ray hit rate [MHz/cm2]: 39.8 43.1 41.0 75.0 70.6 88.8 90.0 98.8 104.5 93.5 91.3 75.7 77.8 43.3 50.3 47.1
[16:25:51.368] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[16:25:51.414] <TB2> INFO: PixTest:: pg_setup set to default.
[16:25:51.423] <TB2> INFO: enter test to run
[16:25:51.423] <TB2> INFO: test: no parameter change
[16:25:51.613] <TB2> QUIET: Connection to board 162 closed.
[16:25:51.692] <TB2> INFO: pXar: this is the end, my friend

[16:26:15.313] <TB2> INFO: *** Welcome to pxar ***
[16:26:15.313] <TB2> INFO: *** Today: 2016/02/08
[16:26:15.385] <TB2> INFO: *** Version: 9751
[16:26:15.385] <TB2> INFO: readRocDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//013_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//013_HREfficiency_100//dacParameters35_C15.dat
[16:26:15.385] <TB2> INFO: readTbmDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//013_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//013_HREfficiency_100//tbmParameters_C0b.dat
[16:26:15.385] <TB2> INFO: readMaskFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//013_HREfficiency_100//defaultMaskFile.dat
[16:26:15.385] <TB2> INFO: readTrimFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//013_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//013_HREfficiency_100//trimParameters35_C15.dat
[16:26:15.453] <TB2> INFO: clk: 4
[16:26:15.453] <TB2> INFO: ctr: 4
[16:26:15.453] <TB2> INFO: sda: 19
[16:26:15.453] <TB2> INFO: tin: 9
[16:26:15.453] <TB2> INFO: level: 15
[16:26:15.453] <TB2> INFO: triggerdelay: 0
[16:26:15.453] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[16:26:15.453] <TB2> INFO: Log level: INFO
[16:26:15.466] <TB2> INFO: Found DTB DTB_WXENWR
[16:26:15.477] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[16:26:15.479] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[16:26:15.481] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[16:26:17.030] <TB2> INFO: DUT info:
[16:26:17.031] <TB2> INFO: The DUT currently contains the following objects:
[16:26:17.031] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[16:26:17.031] <TB2> INFO: TBM Core alpha (0): 7 registers set
[16:26:17.031] <TB2> INFO: TBM Core beta (1): 7 registers set
[16:26:17.031] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:26:17.031] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.031] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:26:17.431] <TB2> INFO: enter 'restricted' command line mode
[16:26:17.431] <TB2> INFO: enter test to run
[16:26:17.431] <TB2> INFO: test: PixelAlive no parameter change
[16:26:17.431] <TB2> INFO: running: pixelalive
[16:26:17.436] <TB2> INFO: ######################################################################
[16:26:17.436] <TB2> INFO: PixTestAlive::doTest()
[16:26:17.436] <TB2> INFO: ######################################################################
[16:26:17.437] <TB2> INFO: ----------------------------------------------------------------------
[16:26:17.437] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:26:17.437] <TB2> INFO: ----------------------------------------------------------------------
[16:26:17.744] <TB2> INFO: Expecting 208000 events.
[16:26:29.652] <TB2> INFO: 208000 events read in total (11349ms).
[16:26:29.654] <TB2> INFO: Test took 12214ms.
[16:26:29.907] <TB2> INFO: PixTestAlive::aliveTest() done
[16:26:29.907] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5
[16:26:29.909] <TB2> INFO: ----------------------------------------------------------------------
[16:26:29.909] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:26:29.909] <TB2> INFO: ----------------------------------------------------------------------
[16:26:30.170] <TB2> INFO: Expecting 208000 events.
[16:26:37.525] <TB2> INFO: 208000 events read in total (6797ms).
[16:26:37.525] <TB2> INFO: Test took 7614ms.
[16:26:37.526] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[16:26:37.785] <TB2> INFO: PixTestAlive::maskTest() done
[16:26:37.785] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[16:26:37.786] <TB2> INFO: ----------------------------------------------------------------------
[16:26:37.786] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:26:37.786] <TB2> INFO: ----------------------------------------------------------------------
[16:26:38.073] <TB2> INFO: Expecting 208000 events.
[16:26:49.347] <TB2> INFO: 208000 events read in total (10717ms).
[16:26:49.348] <TB2> INFO: Test took 11559ms.
[16:26:49.563] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[16:26:49.563] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[16:26:49.563] <TB2> INFO: PixTestAlive::doTest() done, duration: 32 seconds
[16:26:49.593] <TB2> INFO: enter test to run
[16:26:49.593] <TB2> INFO: test: delay setting parameters: ->2<-
[16:26:49.593] <TB2> INFO: delay test by 2 seconds...
[16:26:51.593] <TB2> INFO: enter test to run
[16:26:51.593] <TB2> INFO: test: HighRate no parameter change
[16:26:51.593] <TB2> INFO: running: highrate
[16:26:51.593] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//013_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//013_HREfficiency_100//phCalibrationFitErr35_C15.dat
[16:26:51.724] <TB2> INFO: ----------------------------------------------------------------------
[16:26:51.724] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:26:51.724] <TB2> INFO: ----------------------------------------------------------------------
[16:26:52.211] <TB2> INFO: Expecting 208000 events.
[16:27:12.913] <TB2> INFO: 208000 events read in total (20300ms).
[16:27:12.923] <TB2> INFO: Test took 21194ms.
[16:27:13.866] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4
[16:27:13.866] <TB2> INFO: number of red-efficiency pixels: 342 329 396 1041 847 1381 1307 1584 1757 1385 1338 1015 1174 463 556 425
[16:27:13.866] <TB2> INFO: number of X-ray hits detected: 186637 203907 192969 347550 331755 411107 416966 457118 485770 435079 422608 356013 363582 205565 235904 220662
[16:27:13.866] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:27:13.866] <TB2> INFO: number of Vcal hits detected: 207633 207653 207500 206705 206955 206066 206196 205860 205524 205935 206162 206717 206463 207414 207398 207294
[16:27:13.866] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.8 99.8 99.8 99.5 99.6 99.2 99.3 99.1 98.9 99.2 99.2 99.5 99.3 99.8 99.7 99.8
[16:27:13.866] <TB2> INFO: Vcal hit overall efficiency (%): 99.8 99.8 99.8 99.4 99.5 99.1 99.1 99.0 98.8 99.0 99.1 99.4 99.3 99.7 99.7 99.7
[16:27:13.866] <TB2> INFO: X-ray hit rate [MHz/cm2]: 54.7 59.8 56.6 101.9 97.2 120.5 122.2 134.0 142.4 127.5 123.9 104.4 106.6 60.3 69.1 64.7
[16:27:13.866] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[16:27:13.910] <TB2> INFO: PixTest:: pg_setup set to default.
[16:27:13.921] <TB2> INFO: enter test to run
[16:27:13.921] <TB2> INFO: test: no parameter change
[16:27:14.141] <TB2> QUIET: Connection to board 162 closed.
[16:27:14.220] <TB2> INFO: pXar: this is the end, my friend

[16:27:35.908] <TB2> INFO: *** Welcome to pxar ***
[16:27:35.908] <TB2> INFO: *** Today: 2016/02/08
[16:27:35.978] <TB2> INFO: *** Version: 9751
[16:27:35.978] <TB2> INFO: readRocDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//014_HREfficiency_125//dacParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//014_HREfficiency_125//dacParameters35_C15.dat
[16:27:35.979] <TB2> INFO: readTbmDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//014_HREfficiency_125//tbmParameters_C0a.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//014_HREfficiency_125//tbmParameters_C0b.dat
[16:27:35.979] <TB2> INFO: readMaskFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//014_HREfficiency_125//defaultMaskFile.dat
[16:27:35.979] <TB2> INFO: readTrimFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//014_HREfficiency_125//trimParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//014_HREfficiency_125//trimParameters35_C15.dat
[16:27:36.047] <TB2> INFO: clk: 4
[16:27:36.047] <TB2> INFO: ctr: 4
[16:27:36.047] <TB2> INFO: sda: 19
[16:27:36.047] <TB2> INFO: tin: 9
[16:27:36.047] <TB2> INFO: level: 15
[16:27:36.047] <TB2> INFO: triggerdelay: 0
[16:27:36.047] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[16:27:36.047] <TB2> INFO: Log level: INFO
[16:27:36.060] <TB2> INFO: Found DTB DTB_WXENWR
[16:27:36.071] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[16:27:36.073] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[16:27:36.075] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[16:27:37.638] <TB2> INFO: DUT info:
[16:27:37.638] <TB2> INFO: The DUT currently contains the following objects:
[16:27:37.638] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[16:27:37.638] <TB2> INFO: TBM Core alpha (0): 7 registers set
[16:27:37.638] <TB2> INFO: TBM Core beta (1): 7 registers set
[16:27:37.638] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:27:37.638] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:37.638] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:38.039] <TB2> INFO: enter 'restricted' command line mode
[16:27:38.039] <TB2> INFO: enter test to run
[16:27:38.039] <TB2> INFO: test: PixelAlive no parameter change
[16:27:38.039] <TB2> INFO: running: pixelalive
[16:27:38.043] <TB2> INFO: ######################################################################
[16:27:38.043] <TB2> INFO: PixTestAlive::doTest()
[16:27:38.043] <TB2> INFO: ######################################################################
[16:27:38.044] <TB2> INFO: ----------------------------------------------------------------------
[16:27:38.045] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:27:38.045] <TB2> INFO: ----------------------------------------------------------------------
[16:27:38.351] <TB2> INFO: Expecting 208000 events.
[16:27:49.866] <TB2> INFO: 208000 events read in total (10956ms).
[16:27:49.868] <TB2> INFO: Test took 11821ms.
[16:27:50.108] <TB2> INFO: PixTestAlive::aliveTest() done
[16:27:50.108] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5
[16:27:50.109] <TB2> INFO: ----------------------------------------------------------------------
[16:27:50.109] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:27:50.109] <TB2> INFO: ----------------------------------------------------------------------
[16:27:50.392] <TB2> INFO: Expecting 208000 events.
[16:27:57.708] <TB2> INFO: 208000 events read in total (6758ms).
[16:27:57.708] <TB2> INFO: Test took 7596ms.
[16:27:57.709] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[16:27:57.968] <TB2> INFO: PixTestAlive::maskTest() done
[16:27:57.968] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[16:27:57.970] <TB2> INFO: ----------------------------------------------------------------------
[16:27:57.970] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:27:57.970] <TB2> INFO: ----------------------------------------------------------------------
[16:27:58.233] <TB2> INFO: Expecting 208000 events.
[16:28:09.628] <TB2> INFO: 208000 events read in total (10838ms).
[16:28:09.628] <TB2> INFO: Test took 11656ms.
[16:28:09.843] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[16:28:09.843] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[16:28:09.843] <TB2> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[16:28:09.872] <TB2> INFO: enter test to run
[16:28:09.873] <TB2> INFO: test: delay setting parameters: ->2<-
[16:28:09.873] <TB2> INFO: delay test by 2 seconds...
[16:28:11.873] <TB2> INFO: enter test to run
[16:28:11.873] <TB2> INFO: test: HighRate no parameter change
[16:28:11.873] <TB2> INFO: running: highrate
[16:28:11.873] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//014_HREfficiency_125//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//014_HREfficiency_125//phCalibrationFitErr35_C15.dat
[16:28:12.033] <TB2> INFO: ----------------------------------------------------------------------
[16:28:12.033] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:28:12.033] <TB2> INFO: ----------------------------------------------------------------------
[16:28:12.521] <TB2> INFO: Expecting 208000 events.
[16:28:35.474] <TB2> INFO: 208000 events read in total (22550ms).
[16:28:35.489] <TB2> INFO: Test took 23452ms.
[16:28:36.585] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4
[16:28:36.585] <TB2> INFO: number of red-efficiency pixels: 571 439 565 1515 1231 1937 1854 2358 2419 1992 1935 1517 1715 623 831 583
[16:28:36.585] <TB2> INFO: number of X-ray hits detected: 229201 248482 236059 420980 402179 495492 503153 553026 585617 527415 512685 430174 438963 250312 287345 267929
[16:28:36.585] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:28:36.585] <TB2> INFO: number of Vcal hits detected: 207375 207530 207172 205770 206325 204894 204819 204123 203884 204531 204899 205773 205464 207145 207031 207103
[16:28:36.585] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.7 99.8 99.7 99.1 99.3 98.7 98.7 98.3 98.2 98.6 98.7 99.1 98.9 99.7 99.6 99.7
[16:28:36.585] <TB2> INFO: Vcal hit overall efficiency (%): 99.7 99.8 99.6 98.9 99.2 98.5 98.5 98.1 98.0 98.3 98.5 98.9 98.8 99.6 99.5 99.6
[16:28:36.585] <TB2> INFO: X-ray hit rate [MHz/cm2]: 67.2 72.8 69.2 123.4 117.9 145.2 147.5 162.1 171.6 154.6 150.3 126.1 128.7 73.4 84.2 78.5
[16:28:36.585] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[16:28:36.630] <TB2> INFO: PixTest:: pg_setup set to default.
[16:28:36.645] <TB2> INFO: enter test to run
[16:28:36.645] <TB2> INFO: test: no parameter change
[16:28:36.878] <TB2> QUIET: Connection to board 162 closed.
[16:28:36.958] <TB2> INFO: pXar: this is the end, my friend

[16:28:57.596] <TB2> INFO: *** Welcome to pxar ***
[16:28:57.596] <TB2> INFO: *** Today: 2016/02/08
[16:28:57.660] <TB2> INFO: *** Version: 9751
[16:28:57.660] <TB2> INFO: readRocDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//015_HREfficiency_150//dacParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//015_HREfficiency_150//dacParameters35_C15.dat
[16:28:57.660] <TB2> INFO: readTbmDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//015_HREfficiency_150//tbmParameters_C0a.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//015_HREfficiency_150//tbmParameters_C0b.dat
[16:28:57.661] <TB2> INFO: readMaskFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//015_HREfficiency_150//defaultMaskFile.dat
[16:28:57.661] <TB2> INFO: readTrimFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//015_HREfficiency_150//trimParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//015_HREfficiency_150//trimParameters35_C15.dat
[16:28:57.735] <TB2> INFO: clk: 4
[16:28:57.735] <TB2> INFO: ctr: 4
[16:28:57.735] <TB2> INFO: sda: 19
[16:28:57.735] <TB2> INFO: tin: 9
[16:28:57.735] <TB2> INFO: level: 15
[16:28:57.735] <TB2> INFO: triggerdelay: 0
[16:28:57.735] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[16:28:57.735] <TB2> INFO: Log level: INFO
[16:28:57.749] <TB2> INFO: Found DTB DTB_WXENWR
[16:28:57.761] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[16:28:57.763] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[16:28:57.765] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[16:28:59.335] <TB2> INFO: DUT info:
[16:28:59.335] <TB2> INFO: The DUT currently contains the following objects:
[16:28:59.335] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[16:28:59.335] <TB2> INFO: TBM Core alpha (0): 7 registers set
[16:28:59.335] <TB2> INFO: TBM Core beta (1): 7 registers set
[16:28:59.335] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:28:59.335] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.335] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:28:59.736] <TB2> INFO: enter 'restricted' command line mode
[16:28:59.736] <TB2> INFO: enter test to run
[16:28:59.736] <TB2> INFO: test: PixelAlive no parameter change
[16:28:59.736] <TB2> INFO: running: pixelalive
[16:28:59.739] <TB2> INFO: ######################################################################
[16:28:59.739] <TB2> INFO: PixTestAlive::doTest()
[16:28:59.739] <TB2> INFO: ######################################################################
[16:28:59.740] <TB2> INFO: ----------------------------------------------------------------------
[16:28:59.741] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:28:59.741] <TB2> INFO: ----------------------------------------------------------------------
[16:29:00.006] <TB2> INFO: Expecting 208000 events.
[16:29:11.411] <TB2> INFO: 208000 events read in total (10846ms).
[16:29:11.413] <TB2> INFO: Test took 11670ms.
[16:29:11.652] <TB2> INFO: PixTestAlive::aliveTest() done
[16:29:11.652] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5
[16:29:11.653] <TB2> INFO: ----------------------------------------------------------------------
[16:29:11.653] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:29:11.653] <TB2> INFO: ----------------------------------------------------------------------
[16:29:11.915] <TB2> INFO: Expecting 208000 events.
[16:29:19.238] <TB2> INFO: 208000 events read in total (6766ms).
[16:29:19.239] <TB2> INFO: Test took 7583ms.
[16:29:19.239] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[16:29:19.497] <TB2> INFO: PixTestAlive::maskTest() done
[16:29:19.497] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[16:29:19.499] <TB2> INFO: ----------------------------------------------------------------------
[16:29:19.499] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:29:19.499] <TB2> INFO: ----------------------------------------------------------------------
[16:29:19.762] <TB2> INFO: Expecting 208000 events.
[16:29:30.659] <TB2> INFO: 208000 events read in total (10341ms).
[16:29:30.660] <TB2> INFO: Test took 11159ms.
[16:29:30.875] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[16:29:30.875] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[16:29:30.876] <TB2> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[16:29:30.907] <TB2> INFO: enter test to run
[16:29:30.907] <TB2> INFO: test: delay setting parameters: ->2<-
[16:29:30.907] <TB2> INFO: delay test by 2 seconds...
[16:29:32.907] <TB2> INFO: enter test to run
[16:29:32.907] <TB2> INFO: test: HighRate no parameter change
[16:29:32.907] <TB2> INFO: running: highrate
[16:29:32.907] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//015_HREfficiency_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//015_HREfficiency_150//phCalibrationFitErr35_C15.dat
[16:29:33.067] <TB2> INFO: ----------------------------------------------------------------------
[16:29:33.067] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:29:33.067] <TB2> INFO: ----------------------------------------------------------------------
[16:29:33.576] <TB2> INFO: Expecting 208000 events.
[16:29:59.103] <TB2> INFO: 208000 events read in total (25124ms).
[16:29:59.119] <TB2> INFO: Test took 26048ms.
[16:30:00.548] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5
[16:30:00.548] <TB2> INFO: number of red-efficiency pixels: 791 680 772 2024 1728 2572 2516 3036 3138 2656 2581 2112 2278 875 1175 816
[16:30:00.548] <TB2> INFO: number of X-ray hits detected: 271843 297732 281673 499538 476994 588197 597308 654113 693139 623652 608489 510163 521337 298019 342561 320663
[16:30:00.548] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:30:00.548] <TB2> INFO: number of Vcal hits detected: 207105 207237 206677 204489 205264 202790 202674 201651 200948 202177 202810 204247 203983 206532 206540 206763
[16:30:00.548] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.6 99.7 99.5 98.5 98.9 97.9 97.8 97.2 96.9 97.6 97.8 98.5 98.3 99.4 99.4 99.6
[16:30:00.548] <TB2> INFO: Vcal hit overall efficiency (%): 99.6 99.6 99.4 98.3 98.7 97.5 97.4 96.9 96.6 97.2 97.5 98.2 98.1 99.3 99.3 99.4
[16:30:00.548] <TB2> INFO: X-ray hit rate [MHz/cm2]: 79.7 87.3 82.6 146.4 139.8 172.4 175.1 191.7 203.2 182.8 178.4 149.5 152.8 87.4 100.4 94.0
[16:30:00.548] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[16:30:00.593] <TB2> INFO: PixTest:: pg_setup set to default.
[16:30:00.606] <TB2> INFO: enter test to run
[16:30:00.606] <TB2> INFO: test: no parameter change
[16:30:00.817] <TB2> QUIET: Connection to board 162 closed.
[16:30:00.897] <TB2> INFO: pXar: this is the end, my friend

[16:30:20.433] <TB2> INFO: *** Welcome to pxar ***
[16:30:20.433] <TB2> INFO: *** Today: 2016/02/08
[16:30:20.496] <TB2> INFO: *** Version: 9751
[16:30:20.496] <TB2> INFO: readRocDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//016_HREfficiency_200//dacParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//016_HREfficiency_200//dacParameters35_C15.dat
[16:30:20.497] <TB2> INFO: readTbmDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//016_HREfficiency_200//tbmParameters_C0a.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//016_HREfficiency_200//tbmParameters_C0b.dat
[16:30:20.497] <TB2> INFO: readMaskFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//016_HREfficiency_200//defaultMaskFile.dat
[16:30:20.497] <TB2> INFO: readTrimFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//016_HREfficiency_200//trimParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//016_HREfficiency_200//trimParameters35_C15.dat
[16:30:20.578] <TB2> INFO: clk: 4
[16:30:20.578] <TB2> INFO: ctr: 4
[16:30:20.578] <TB2> INFO: sda: 19
[16:30:20.578] <TB2> INFO: tin: 9
[16:30:20.578] <TB2> INFO: level: 15
[16:30:20.578] <TB2> INFO: triggerdelay: 0
[16:30:20.578] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[16:30:20.578] <TB2> INFO: Log level: INFO
[16:30:20.591] <TB2> INFO: Found DTB DTB_WXENWR
[16:30:20.603] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[16:30:20.605] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[16:30:20.607] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[16:30:22.150] <TB2> INFO: DUT info:
[16:30:22.151] <TB2> INFO: The DUT currently contains the following objects:
[16:30:22.151] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[16:30:22.151] <TB2> INFO: TBM Core alpha (0): 7 registers set
[16:30:22.151] <TB2> INFO: TBM Core beta (1): 7 registers set
[16:30:22.151] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:30:22.151] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.151] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:30:22.552] <TB2> INFO: enter 'restricted' command line mode
[16:30:22.552] <TB2> INFO: enter test to run
[16:30:22.552] <TB2> INFO: test: PixelAlive no parameter change
[16:30:22.552] <TB2> INFO: running: pixelalive
[16:30:22.557] <TB2> INFO: ######################################################################
[16:30:22.557] <TB2> INFO: PixTestAlive::doTest()
[16:30:22.557] <TB2> INFO: ######################################################################
[16:30:22.558] <TB2> INFO: ----------------------------------------------------------------------
[16:30:22.558] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:30:22.558] <TB2> INFO: ----------------------------------------------------------------------
[16:30:22.830] <TB2> INFO: Expecting 208000 events.
[16:30:34.257] <TB2> INFO: 208000 events read in total (10868ms).
[16:30:34.259] <TB2> INFO: Test took 11698ms.
[16:30:34.499] <TB2> INFO: PixTestAlive::aliveTest() done
[16:30:34.499] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3
[16:30:34.501] <TB2> INFO: ----------------------------------------------------------------------
[16:30:34.501] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:30:34.501] <TB2> INFO: ----------------------------------------------------------------------
[16:30:34.771] <TB2> INFO: Expecting 208000 events.
[16:30:42.095] <TB2> INFO: 208000 events read in total (6767ms).
[16:30:42.096] <TB2> INFO: Test took 7593ms.
[16:30:42.096] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[16:30:42.354] <TB2> INFO: PixTestAlive::maskTest() done
[16:30:42.354] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[16:30:42.356] <TB2> INFO: ----------------------------------------------------------------------
[16:30:42.356] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:30:42.356] <TB2> INFO: ----------------------------------------------------------------------
[16:30:42.618] <TB2> INFO: Expecting 208000 events.
[16:30:53.717] <TB2> INFO: 208000 events read in total (10542ms).
[16:30:53.718] <TB2> INFO: Test took 11360ms.
[16:30:53.936] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[16:30:53.936] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[16:30:53.936] <TB2> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[16:30:53.967] <TB2> INFO: enter test to run
[16:30:53.967] <TB2> INFO: test: delay setting parameters: ->2<-
[16:30:53.967] <TB2> INFO: delay test by 2 seconds...
[16:30:55.967] <TB2> INFO: enter test to run
[16:30:55.967] <TB2> INFO: test: HighRate no parameter change
[16:30:55.968] <TB2> INFO: running: highrate
[16:30:55.968] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//016_HREfficiency_200//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//016_HREfficiency_200//phCalibrationFitErr35_C15.dat
[16:30:56.133] <TB2> INFO: ----------------------------------------------------------------------
[16:30:56.133] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:30:56.133] <TB2> INFO: ----------------------------------------------------------------------
[16:30:56.656] <TB2> INFO: Expecting 208000 events.
[16:31:29.161] <TB2> INFO: 208000 events read in total (32103ms).
[16:31:29.180] <TB2> INFO: Test took 33043ms.
[16:31:30.771] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4
[16:31:30.771] <TB2> INFO: number of red-efficiency pixels: 1395 1254 1290 3226 2953 3682 3609 3945 4006 3752 3776 3224 3379 1418 2228 1607
[16:31:30.771] <TB2> INFO: number of X-ray hits detected: 371940 404787 384981 670781 647046 788312 801288 876414 930895 838331 817102 689192 702189 407631 464111 434089
[16:31:30.771] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:31:30.771] <TB2> INFO: number of Vcal hits detected: 206130 206472 204935 199603 201055 195590 195003 192488 190516 193617 195039 199205 198796 204694 204535 205371
[16:31:30.771] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.2 99.3 98.8 96.5 97.1 94.7 94.6 93.2 92.3 93.9 94.5 96.3 96.1 98.7 98.5 99.0
[16:31:30.771] <TB2> INFO: Vcal hit overall efficiency (%): 99.1 99.3 98.5 96.0 96.7 94.0 93.8 92.5 91.6 93.1 93.8 95.8 95.6 98.4 98.3 98.7
[16:31:30.771] <TB2> INFO: X-ray hit rate [MHz/cm2]: 109.0 118.6 112.8 196.6 189.7 231.1 234.9 256.9 272.9 245.7 239.5 202.0 205.8 119.5 136.0 127.2
[16:31:30.771] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[16:31:30.816] <TB2> INFO: PixTest:: pg_setup set to default.
[16:31:30.833] <TB2> INFO: enter test to run
[16:31:30.833] <TB2> INFO: test: no parameter change
[16:31:31.033] <TB2> QUIET: Connection to board 162 closed.
[16:31:31.113] <TB2> INFO: pXar: this is the end, my friend

[16:31:50.082] <TB2> INFO: *** Welcome to pxar ***
[16:31:50.082] <TB2> INFO: *** Today: 2016/02/08
[16:31:50.146] <TB2> INFO: *** Version: 9751
[16:31:50.146] <TB2> INFO: readRocDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//017_HREfficiency_250//dacParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//017_HREfficiency_250//dacParameters35_C15.dat
[16:31:50.147] <TB2> INFO: readTbmDacs: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//017_HREfficiency_250//tbmParameters_C0a.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//017_HREfficiency_250//tbmParameters_C0b.dat
[16:31:50.147] <TB2> INFO: readMaskFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//017_HREfficiency_250//defaultMaskFile.dat
[16:31:50.147] <TB2> INFO: readTrimFile: /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//017_HREfficiency_250//trimParameters35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//017_HREfficiency_250//trimParameters35_C15.dat
[16:31:50.214] <TB2> INFO: clk: 4
[16:31:50.214] <TB2> INFO: ctr: 4
[16:31:50.214] <TB2> INFO: sda: 19
[16:31:50.214] <TB2> INFO: tin: 9
[16:31:50.214] <TB2> INFO: level: 15
[16:31:50.214] <TB2> INFO: triggerdelay: 0
[16:31:50.214] <TB2> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[16:31:50.214] <TB2> INFO: Log level: INFO
[16:31:50.227] <TB2> INFO: Found DTB DTB_WXENWR
[16:31:50.238] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[16:31:50.240] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[16:31:50.242] <TB2> INFO: RPC call hashes of host and DTB match: 484264910
[16:31:51.791] <TB2> INFO: DUT info:
[16:31:51.791] <TB2> INFO: The DUT currently contains the following objects:
[16:31:51.791] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[16:31:51.791] <TB2> INFO: TBM Core alpha (0): 7 registers set
[16:31:51.791] <TB2> INFO: TBM Core beta (1): 7 registers set
[16:31:51.791] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:31:51.791] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:51.791] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:31:52.192] <TB2> INFO: enter 'restricted' command line mode
[16:31:52.192] <TB2> INFO: enter test to run
[16:31:52.192] <TB2> INFO: test: PixelAlive no parameter change
[16:31:52.192] <TB2> INFO: running: pixelalive
[16:31:52.196] <TB2> INFO: ######################################################################
[16:31:52.196] <TB2> INFO: PixTestAlive::doTest()
[16:31:52.196] <TB2> INFO: ######################################################################
[16:31:52.198] <TB2> INFO: ----------------------------------------------------------------------
[16:31:52.198] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:31:52.198] <TB2> INFO: ----------------------------------------------------------------------
[16:31:52.476] <TB2> INFO: Expecting 208000 events.
[16:32:03.678] <TB2> INFO: 208000 events read in total (10642ms).
[16:32:03.679] <TB2> INFO: Test took 11479ms.
[16:32:03.920] <TB2> INFO: PixTestAlive::aliveTest() done
[16:32:03.920] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3
[16:32:03.921] <TB2> INFO: ----------------------------------------------------------------------
[16:32:03.921] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:32:03.921] <TB2> INFO: ----------------------------------------------------------------------
[16:32:04.216] <TB2> INFO: Expecting 208000 events.
[16:32:11.660] <TB2> INFO: 208000 events read in total (6887ms).
[16:32:11.661] <TB2> INFO: Test took 7737ms.
[16:32:11.661] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[16:32:11.919] <TB2> INFO: PixTestAlive::maskTest() done
[16:32:11.919] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[16:32:11.921] <TB2> INFO: ----------------------------------------------------------------------
[16:32:11.921] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[16:32:11.921] <TB2> INFO: ----------------------------------------------------------------------
[16:32:12.214] <TB2> INFO: Expecting 208000 events.
[16:32:23.448] <TB2> INFO: 208000 events read in total (10677ms).
[16:32:23.449] <TB2> INFO: Test took 11526ms.
[16:32:23.666] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[16:32:23.666] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[16:32:23.666] <TB2> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[16:32:23.697] <TB2> INFO: enter test to run
[16:32:23.698] <TB2> INFO: test: delay setting parameters: ->2<-
[16:32:23.698] <TB2> INFO: delay test by 2 seconds...
[16:32:25.698] <TB2> INFO: enter test to run
[16:32:25.698] <TB2> INFO: test: HighRate no parameter change
[16:32:25.698] <TB2> INFO: running: highrate
[16:32:25.698] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//017_HREfficiency_250//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2150_XrayQualification_2016-02-08_16h09m_1454944192//017_HREfficiency_250//phCalibrationFitErr35_C15.dat
[16:32:25.853] <TB2> INFO: ----------------------------------------------------------------------
[16:32:25.853] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:32:25.853] <TB2> INFO: ----------------------------------------------------------------------
[16:32:26.342] <TB2> INFO: Expecting 208000 events.
[16:33:01.322] <TB2> INFO: 188950 events read in total (34578ms).
[16:33:05.017] <TB2> INFO: 208000 events read in total (38273ms).
[16:33:05.037] <TB2> INFO: Test took 39180ms.
[16:33:06.963] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5
[16:33:06.964] <TB2> INFO: number of red-efficiency pixels: 2101 1906 1746 3850 3654 4057 4056 4142 4138 4084 4105 3869 3925 1810 3088 2287
[16:33:06.964] <TB2> INFO: number of X-ray hits detected: 458230 500885 475826 824446 796602 966464 984219 1074872 1143576 1031686 1006641 852838 862586 505347 571118 539383
[16:33:06.964] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:33:06.964] <TB2> INFO: number of Vcal hits detected: 204613 205206 202547 193157 195311 185101 184753 180349 175798 182191 184575 191631 191240 201889 201611 203533
[16:33:06.964] <TB2> INFO: Vcal hit fiducial efficiency (%): 98.6 98.8 97.9 93.7 94.5 90.1 90.1 87.7 85.5 88.8 89.9 93.1 92.8 97.6 97.1 98.2
[16:33:06.964] <TB2> INFO: Vcal hit overall efficiency (%): 98.4 98.7 97.4 92.9 93.9 89.0 88.8 86.7 84.5 87.6 88.7 92.1 91.9 97.1 96.9 97.9
[16:33:06.964] <TB2> INFO: X-ray hit rate [MHz/cm2]: 134.3 146.8 139.5 241.7 233.5 283.3 288.5 315.1 335.2 302.4 295.1 250.0 252.8 148.1 167.4 158.1
[16:33:06.964] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[16:33:07.008] <TB2> INFO: PixTest:: pg_setup set to default.
[16:33:07.022] <TB2> INFO: enter test to run
[16:33:07.022] <TB2> INFO: test: no parameter change
[16:33:07.272] <TB2> QUIET: Connection to board 162 closed.
[16:33:07.352] <TB2> INFO: pXar: this is the end, my friend