[10:29:19.745] <TB1> INFO: *** Welcome to pxar ***
[10:29:19.745] <TB1> INFO: *** Today: 2016/02/08
[10:29:19.813] <TB1> INFO: *** Version: 9751
[10:29:19.813] <TB1> INFO: readRocDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//000_PixelAlive_p17//dacParameters35_C15.dat
[10:29:19.814] <TB1> INFO: readTbmDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//000_PixelAlive_p17//tbmParameters_C0b.dat
[10:29:19.814] <TB1> INFO: readMaskFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//000_PixelAlive_p17//defaultMaskFile.dat
[10:29:19.814] <TB1> INFO: readTrimFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//000_PixelAlive_p17//trimParameters35_C15.dat
[10:29:19.883] <TB1> INFO: clk: 4
[10:29:19.883] <TB1> INFO: ctr: 4
[10:29:19.883] <TB1> INFO: sda: 19
[10:29:19.883] <TB1> INFO: tin: 9
[10:29:19.883] <TB1> INFO: level: 15
[10:29:19.883] <TB1> INFO: triggerdelay: 0
[10:29:19.883] <TB1> QUIET: Instanciating API for pxar prod-12
[10:29:19.883] <TB1> INFO: Log level: INFO
[10:29:19.896] <TB1> INFO: Found DTB DTB_WWXTQT
[10:29:19.905] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:29:19.908] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:29:19.911] <TB1> INFO: RPC call hashes of host and DTB match: 398089610
[10:29:21.462] <TB1> INFO: DUT info:
[10:29:21.462] <TB1> INFO: The DUT currently contains the following objects:
[10:29:21.462] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:29:21.462] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:29:21.462] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:29:21.462] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:29:21.462] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.462] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:21.863] <TB1> INFO: enter 'restricted' command line mode
[10:29:21.863] <TB1> INFO: enter test to run
[10:29:21.863] <TB1> INFO: test: PixelAlive no parameter change
[10:29:21.863] <TB1> INFO: running: pixelalive
[10:29:21.870] <TB1> INFO: ######################################################################
[10:29:21.870] <TB1> INFO: PixTestAlive::doTest()
[10:29:21.870] <TB1> INFO: ######################################################################
[10:29:21.872] <TB1> INFO: ----------------------------------------------------------------------
[10:29:21.872] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:29:21.872] <TB1> INFO: ----------------------------------------------------------------------
[10:29:22.186] <TB1> INFO: Expecting 41600 events.
[10:29:26.537] <TB1> INFO: 41600 events read in total (3633ms).
[10:29:26.616] <TB1> INFO: Test took 4742ms.
[10:29:26.622] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:29:26.875] <TB1> INFO: PixTestAlive::aliveTest() done
[10:29:26.875] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:29:26.876] <TB1> INFO: ----------------------------------------------------------------------
[10:29:26.876] <TB1> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:29:26.876] <TB1> INFO: ----------------------------------------------------------------------
[10:29:27.175] <TB1> INFO: Expecting 41600 events.
[10:29:30.289] <TB1> INFO: 41600 events read in total (2398ms).
[10:29:30.289] <TB1> INFO: Test took 3411ms.
[10:29:30.289] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:29:30.290] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:29:30.603] <TB1> INFO: PixTestAlive::maskTest() done
[10:29:30.603] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:29:30.604] <TB1> INFO: ----------------------------------------------------------------------
[10:29:30.604] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:29:30.604] <TB1> INFO: ----------------------------------------------------------------------
[10:29:30.911] <TB1> INFO: Expecting 41600 events.
[10:29:35.238] <TB1> INFO: 41600 events read in total (3611ms).
[10:29:35.239] <TB1> INFO: Test took 4633ms.
[10:29:35.245] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:29:35.533] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[10:29:35.533] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:29:35.533] <TB1> INFO: PixTestAlive::doTest() done, duration: 13 seconds
[10:29:35.580] <TB1> INFO: enter test to run
[10:29:35.580] <TB1> INFO: test: no parameter change
[10:29:35.725] <TB1> QUIET: Connection to board 147 closed.
[10:29:35.804] <TB1> INFO: pXar: this is the end, my friend

[10:34:58.358] <TB1> INFO: *** Welcome to pxar ***
[10:34:58.358] <TB1> INFO: *** Today: 2016/02/08
[10:34:58.424] <TB1> INFO: *** Version: 9751
[10:34:58.425] <TB1> INFO: readRocDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//dacParameters35_C15.dat
[10:34:58.426] <TB1> INFO: readTbmDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[10:34:58.426] <TB1> INFO: readMaskFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//defaultMaskFile.dat
[10:34:58.426] <TB1> INFO: readTrimFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C15.dat
[10:34:58.496] <TB1> INFO: clk: 4
[10:34:58.496] <TB1> INFO: ctr: 4
[10:34:58.496] <TB1> INFO: sda: 19
[10:34:58.496] <TB1> INFO: tin: 9
[10:34:58.496] <TB1> INFO: level: 15
[10:34:58.496] <TB1> INFO: triggerdelay: 0
[10:34:58.496] <TB1> QUIET: Instanciating API for pxar prod-12
[10:34:58.496] <TB1> INFO: Log level: INFO
[10:34:58.509] <TB1> INFO: Found DTB DTB_WWXTQT
[10:34:58.517] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:34:58.520] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:34:58.523] <TB1> INFO: RPC call hashes of host and DTB match: 398089610
[10:35:00.075] <TB1> INFO: DUT info:
[10:35:00.075] <TB1> INFO: The DUT currently contains the following objects:
[10:35:00.075] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:35:00.075] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:35:00.075] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:35:00.075] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:35:00.075] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.075] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:00.476] <TB1> INFO: enter 'restricted' command line mode
[10:35:00.476] <TB1> INFO: enter test to run
[10:35:00.476] <TB1> INFO: test: delay setting parameters: ->5<-
[10:35:00.476] <TB1> INFO: delay test by 5 seconds...
[10:35:05.476] <TB1> INFO: enter test to run
[10:35:05.476] <TB1> INFO: test: highrate no parameter change
[10:35:05.476] <TB1> INFO: running: highrate
[10:35:05.477] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[10:35:05.655] <TB1> INFO: ----------------------------------------------------------------------
[10:35:05.655] <TB1> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[10:35:05.655] <TB1> INFO: ----------------------------------------------------------------------
[10:35:05.655] <TB1> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[10:35:05.655] <TB1> INFO: edge/corner pixel THR is adjusted
[10:35:05.655] <TB1> INFO: PixTestHighRate::trimHotPixels: step 0...
[10:35:06.615] <TB1> INFO: Collecting data for 1 seconds...
[10:35:07.616] <TB1> INFO: Done with hot pixel readout
[10:35:16.290] <TB1> INFO: PixTest:: pg_setup set to default.
[10:35:16.291] <TB1> INFO: 0 hot pixels found in step 0
[10:35:16.302] <TB1> INFO: 0 hot pixels could not be trimmed and have been masked.
[10:35:16.347] <TB1> INFO: PixTest::trimHotPixels() done
[10:35:16.347] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C0.dat
[10:35:16.358] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C1.dat
[10:35:16.368] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C2.dat
[10:35:16.378] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C3.dat
[10:35:16.389] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C4.dat
[10:35:16.400] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C5.dat
[10:35:16.410] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C6.dat
[10:35:16.418] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C7.dat
[10:35:16.424] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C8.dat
[10:35:16.431] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C9.dat
[10:35:16.437] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C10.dat
[10:35:16.443] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C11.dat
[10:35:16.450] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C12.dat
[10:35:16.456] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C13.dat
[10:35:16.462] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C14.dat
[10:35:16.468] <TB1> INFO: write trim parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C15.dat
[10:35:16.475] <TB1> INFO: write masked pixels into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//defaultMaskFile.dat
[10:35:16.506] <TB1> INFO: enter test to run
[10:35:16.506] <TB1> INFO: test: no parameter change
[10:35:16.709] <TB1> QUIET: Connection to board 147 closed.
[10:35:16.788] <TB1> INFO: pXar: this is the end, my friend

[10:36:13.504] <TB1> INFO: *** Welcome to pxar ***
[10:36:13.504] <TB1> INFO: *** Today: 2016/02/08
[10:36:13.573] <TB1> INFO: *** Version: 9751
[10:36:13.573] <TB1> INFO: readRocDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//dacParameters35_C15.dat
[10:36:13.574] <TB1> INFO: readTbmDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//tbmParameters_C0b.dat
[10:36:13.574] <TB1> INFO: readMaskFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//defaultMaskFile.dat
[10:36:13.574] <TB1> INFO: readTrimFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//trimParameters35_C15.dat
[10:36:13.663] <TB1> INFO: clk: 4
[10:36:13.663] <TB1> INFO: ctr: 4
[10:36:13.663] <TB1> INFO: sda: 19
[10:36:13.663] <TB1> INFO: tin: 9
[10:36:13.663] <TB1> INFO: level: 15
[10:36:13.663] <TB1> INFO: triggerdelay: 0
[10:36:13.663] <TB1> QUIET: Instanciating API for pxar prod-12
[10:36:13.663] <TB1> INFO: Log level: INFO
[10:36:13.676] <TB1> INFO: Found DTB DTB_WWXTQT
[10:36:13.685] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:36:13.688] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:36:13.690] <TB1> INFO: RPC call hashes of host and DTB match: 398089610
[10:36:15.242] <TB1> INFO: DUT info:
[10:36:15.242] <TB1> INFO: The DUT currently contains the following objects:
[10:36:15.242] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:36:15.242] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:36:15.242] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:36:15.242] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:36:15.242] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.242] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.242] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.242] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.243] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.243] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.243] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.243] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.243] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.243] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.243] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.243] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.243] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.243] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.243] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.243] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:15.644] <TB1> INFO: enter 'restricted' command line mode
[10:36:15.644] <TB1> INFO: enter test to run
[10:36:15.644] <TB1> INFO: test: delay setting parameters: ->5<-
[10:36:15.644] <TB1> INFO: delay test by 5 seconds...
[10:36:20.644] <TB1> INFO: enter test to run
[10:36:20.645] <TB1> INFO: test: Xray no parameter change
[10:36:20.645] <TB1> INFO: running: xray
[10:36:20.645] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//phCalibrationFitErr35_C15.dat
[10:36:20.783] <TB1> INFO: ######################################################################
[10:36:20.783] <TB1> INFO: PixTestXray::doTest()
[10:36:20.783] <TB1> INFO: ######################################################################
[10:36:20.783] <TB1> INFO: ----------------------------------------------------------------------
[10:36:20.783] <TB1> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[10:36:20.783] <TB1> INFO: ----------------------------------------------------------------------
[10:36:21.748] <TB1> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[10:36:28.011] <TB1> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[10:36:58.475] <TB1> INFO: Resuming triggers.
[10:37:04.741] <TB1> INFO: run duration 12 seconds, buffer almost full (81%), pausing triggers.
[10:37:36.298] <TB1> INFO: Resuming triggers.
[10:37:42.561] <TB1> INFO: run duration 18 seconds, buffer almost full (81%), pausing triggers.
[10:38:13.576] <TB1> INFO: Resuming triggers.
[10:38:19.834] <TB1> INFO: run duration 25 seconds, buffer almost full (81%), pausing triggers.
[10:38:51.395] <TB1> INFO: Resuming triggers.
[10:38:57.654] <TB1> INFO: run duration 31 seconds, buffer almost full (81%), pausing triggers.
[10:39:30.375] <TB1> INFO: Resuming triggers.
[10:39:36.635] <TB1> INFO: run duration 37 seconds, buffer almost full (81%), pausing triggers.
[10:40:08.651] <TB1> INFO: Resuming triggers.
[10:40:14.907] <TB1> INFO: run duration 43 seconds, buffer almost full (81%), pausing triggers.
[10:40:46.703] <TB1> INFO: Resuming triggers.
[10:40:52.956] <TB1> INFO: run duration 50 seconds, buffer almost full (81%), pausing triggers.
[10:41:23.928] <TB1> INFO: Resuming triggers.
[10:41:30.187] <TB1> INFO: run duration 56 seconds, buffer almost full (81%), pausing triggers.
[10:42:02.862] <TB1> INFO: Resuming triggers.
[10:42:09.115] <TB1> INFO: run duration 62 seconds, buffer almost full (81%), pausing triggers.
[10:42:42.158] <TB1> INFO: Resuming triggers.
[10:42:48.412] <TB1> INFO: run duration 68 seconds, buffer almost full (81%), pausing triggers.
[10:43:20.253] <TB1> INFO: Resuming triggers.
[10:43:26.505] <TB1> INFO: run duration 75 seconds, buffer almost full (81%), pausing triggers.
[10:43:57.929] <TB1> INFO: Resuming triggers.
[10:44:04.178] <TB1> INFO: run duration 81 seconds, buffer almost full (81%), pausing triggers.
[10:44:35.729] <TB1> INFO: Resuming triggers.
[10:44:41.976] <TB1> INFO: run duration 87 seconds, buffer almost full (81%), pausing triggers.
[10:45:14.875] <TB1> INFO: Resuming triggers.
[10:45:21.122] <TB1> INFO: run duration 93 seconds, buffer almost full (81%), pausing triggers.
[10:45:49.604] <TB1> INFO: Resuming triggers.
[10:45:55.844] <TB1> INFO: run duration 99 seconds, buffer almost full (81%), pausing triggers.
[10:46:18.057] <TB1> INFO: Resuming triggers.
[10:46:18.065] <TB1> INFO: data taking finished, elapsed time: 100 seconds.
[10:46:18.658] <TB1> INFO: PixTest:: pg_setup set to default.
[10:46:18.660] <TB1> INFO: PixTestXray::doPhRun() done
[10:46:18.660] <TB1> INFO: PixTestXray::doTest() done
[10:46:18.831] <TB1> INFO: enter test to run
[10:46:18.831] <TB1> INFO: test: no parameter change
[10:46:19.007] <TB1> QUIET: Connection to board 147 closed.
[10:46:19.087] <TB1> INFO: pXar: this is the end, my friend

[10:46:33.158] <TB1> INFO: *** Welcome to pxar ***
[10:46:33.158] <TB1> INFO: *** Today: 2016/02/08
[10:46:33.228] <TB1> INFO: *** Version: 9751
[10:46:33.228] <TB1> INFO: readRocDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//dacParameters35_C15.dat
[10:46:33.229] <TB1> INFO: readTbmDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//tbmParameters_C0b.dat
[10:46:33.229] <TB1> INFO: readMaskFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//defaultMaskFile.dat
[10:46:33.229] <TB1> INFO: readTrimFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//trimParameters35_C15.dat
[10:46:33.301] <TB1> INFO: clk: 4
[10:46:33.301] <TB1> INFO: ctr: 4
[10:46:33.301] <TB1> INFO: sda: 19
[10:46:33.301] <TB1> INFO: tin: 9
[10:46:33.301] <TB1> INFO: level: 15
[10:46:33.301] <TB1> INFO: triggerdelay: 0
[10:46:33.301] <TB1> QUIET: Instanciating API for pxar prod-12
[10:46:33.301] <TB1> INFO: Log level: INFO
[10:46:33.315] <TB1> INFO: Found DTB DTB_WWXTQT
[10:46:33.325] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:46:33.328] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:46:33.331] <TB1> INFO: RPC call hashes of host and DTB match: 398089610
[10:46:34.891] <TB1> INFO: DUT info:
[10:46:34.891] <TB1> INFO: The DUT currently contains the following objects:
[10:46:34.891] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:46:34.891] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:46:34.892] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:46:34.892] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:46:34.892] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:34.892] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:35.293] <TB1> INFO: enter 'restricted' command line mode
[10:46:35.293] <TB1> INFO: enter test to run
[10:46:35.293] <TB1> INFO: test: delay setting parameters: ->5<-
[10:46:35.293] <TB1> INFO: delay test by 5 seconds...
[10:46:40.293] <TB1> INFO: enter test to run
[10:46:40.293] <TB1> INFO: test: Xray no parameter change
[10:46:40.293] <TB1> INFO: running: xray
[10:46:40.294] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//phCalibrationFitErr35_C15.dat
[10:46:40.445] <TB1> INFO: ######################################################################
[10:46:40.445] <TB1> INFO: PixTestXray::doTest()
[10:46:40.445] <TB1> INFO: ######################################################################
[10:46:40.445] <TB1> INFO: ----------------------------------------------------------------------
[10:46:40.445] <TB1> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[10:46:40.445] <TB1> INFO: ----------------------------------------------------------------------
[10:46:41.411] <TB1> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[10:46:44.727] <TB1> INFO: run duration 3 seconds, buffer almost full (81%), pausing triggers.
[10:47:16.047] <TB1> INFO: Resuming triggers.
[10:47:19.374] <TB1> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[10:47:52.078] <TB1> INFO: Resuming triggers.
[10:47:55.402] <TB1> INFO: run duration 9 seconds, buffer almost full (81%), pausing triggers.
[10:48:27.637] <TB1> INFO: Resuming triggers.
[10:48:30.959] <TB1> INFO: run duration 13 seconds, buffer almost full (81%), pausing triggers.
[10:49:02.832] <TB1> INFO: Resuming triggers.
[10:49:06.155] <TB1> INFO: run duration 16 seconds, buffer almost full (81%), pausing triggers.
[10:49:38.746] <TB1> INFO: Resuming triggers.
[10:49:42.070] <TB1> INFO: run duration 19 seconds, buffer almost full (81%), pausing triggers.
[10:50:15.755] <TB1> INFO: Resuming triggers.
[10:50:19.077] <TB1> INFO: run duration 23 seconds, buffer almost full (81%), pausing triggers.
[10:50:50.737] <TB1> INFO: Resuming triggers.
[10:50:54.054] <TB1> INFO: run duration 26 seconds, buffer almost full (81%), pausing triggers.
[10:51:26.664] <TB1> INFO: Resuming triggers.
[10:51:29.979] <TB1> INFO: run duration 29 seconds, buffer almost full (81%), pausing triggers.
[10:52:03.452] <TB1> INFO: Resuming triggers.
[10:52:06.767] <TB1> INFO: run duration 33 seconds, buffer almost full (81%), pausing triggers.
[10:52:39.795] <TB1> INFO: Resuming triggers.
[10:52:43.111] <TB1> INFO: run duration 36 seconds, buffer almost full (81%), pausing triggers.
[10:53:15.154] <TB1> INFO: Resuming triggers.
[10:53:18.469] <TB1> INFO: run duration 39 seconds, buffer almost full (81%), pausing triggers.
[10:53:52.780] <TB1> INFO: Resuming triggers.
[10:53:56.098] <TB1> INFO: run duration 43 seconds, buffer almost full (81%), pausing triggers.
[10:54:30.209] <TB1> INFO: Resuming triggers.
[10:54:33.525] <TB1> INFO: run duration 46 seconds, buffer almost full (81%), pausing triggers.
[10:55:06.849] <TB1> INFO: Resuming triggers.
[10:55:10.164] <TB1> INFO: run duration 49 seconds, buffer almost full (81%), pausing triggers.
[10:55:43.999] <TB1> INFO: Resuming triggers.
[10:55:47.314] <TB1> INFO: run duration 53 seconds, buffer almost full (81%), pausing triggers.
[10:56:21.433] <TB1> INFO: Resuming triggers.
[10:56:24.744] <TB1> INFO: run duration 56 seconds, buffer almost full (81%), pausing triggers.
[10:56:58.207] <TB1> INFO: Resuming triggers.
[10:57:01.518] <TB1> INFO: run duration 59 seconds, buffer almost full (81%), pausing triggers.
[10:57:35.096] <TB1> INFO: Resuming triggers.
[10:57:38.405] <TB1> INFO: run duration 62 seconds, buffer almost full (81%), pausing triggers.
[10:58:13.379] <TB1> INFO: Resuming triggers.
[10:58:16.687] <TB1> INFO: run duration 66 seconds, buffer almost full (81%), pausing triggers.
[10:58:50.840] <TB1> INFO: Resuming triggers.
[10:58:54.148] <TB1> INFO: run duration 69 seconds, buffer almost full (81%), pausing triggers.
[10:59:26.826] <TB1> INFO: Resuming triggers.
[10:59:30.135] <TB1> INFO: run duration 72 seconds, buffer almost full (81%), pausing triggers.
[11:00:03.520] <TB1> INFO: Resuming triggers.
[11:00:06.826] <TB1> INFO: run duration 76 seconds, buffer almost full (81%), pausing triggers.
[11:00:39.485] <TB1> INFO: Resuming triggers.
[11:00:42.791] <TB1> INFO: run duration 79 seconds, buffer almost full (81%), pausing triggers.
[11:01:16.311] <TB1> INFO: Resuming triggers.
[11:01:19.613] <TB1> INFO: run duration 82 seconds, buffer almost full (81%), pausing triggers.
[11:01:53.312] <TB1> INFO: Resuming triggers.
[11:01:56.617] <TB1> INFO: run duration 86 seconds, buffer almost full (81%), pausing triggers.
[11:02:30.712] <TB1> INFO: Resuming triggers.
[11:02:34.017] <TB1> INFO: run duration 89 seconds, buffer almost full (81%), pausing triggers.
[11:02:56.407] <TB1> INFO: Resuming triggers.
[11:02:59.709] <TB1> INFO: run duration 92 seconds, buffer almost full (81%), pausing triggers.
[11:03:21.889] <TB1> INFO: Resuming triggers.
[11:03:25.194] <TB1> INFO: run duration 96 seconds, buffer almost full (81%), pausing triggers.
[11:03:47.412] <TB1> INFO: Resuming triggers.
[11:03:50.713] <TB1> INFO: run duration 99 seconds, buffer almost full (81%), pausing triggers.
[11:04:12.687] <TB1> INFO: Resuming triggers.
[11:04:13.380] <TB1> INFO: data taking finished, elapsed time: 100 seconds.
[11:04:18.429] <TB1> INFO: PixTest:: pg_setup set to default.
[11:04:18.431] <TB1> INFO: PixTestXray::doPhRun() done
[11:04:18.431] <TB1> INFO: PixTestXray::doTest() done
[11:04:18.611] <TB1> INFO: enter test to run
[11:04:18.611] <TB1> INFO: test: no parameter change
[11:04:18.839] <TB1> QUIET: Connection to board 147 closed.
[11:04:18.919] <TB1> INFO: pXar: this is the end, my friend

[11:04:34.161] <TB1> INFO: *** Welcome to pxar ***
[11:04:34.161] <TB1> INFO: *** Today: 2016/02/08
[11:04:34.228] <TB1> INFO: *** Version: 9751
[11:04:34.228] <TB1> INFO: readRocDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//dacParameters35_C15.dat
[11:04:34.229] <TB1> INFO: readTbmDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//tbmParameters_C0b.dat
[11:04:34.229] <TB1> INFO: readMaskFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//defaultMaskFile.dat
[11:04:34.229] <TB1> INFO: readTrimFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//trimParameters35_C15.dat
[11:04:34.317] <TB1> INFO: clk: 4
[11:04:34.317] <TB1> INFO: ctr: 4
[11:04:34.317] <TB1> INFO: sda: 19
[11:04:34.317] <TB1> INFO: tin: 9
[11:04:34.317] <TB1> INFO: level: 15
[11:04:34.317] <TB1> INFO: triggerdelay: 0
[11:04:34.317] <TB1> QUIET: Instanciating API for pxar prod-12
[11:04:34.317] <TB1> INFO: Log level: INFO
[11:04:34.330] <TB1> INFO: Found DTB DTB_WWXTQT
[11:04:34.338] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:04:34.341] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:04:34.344] <TB1> INFO: RPC call hashes of host and DTB match: 398089610
[11:04:35.899] <TB1> INFO: DUT info:
[11:04:35.899] <TB1> INFO: The DUT currently contains the following objects:
[11:04:35.899] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:04:35.899] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:04:35.899] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:04:35.899] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:04:35.899] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:35.899] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:36.300] <TB1> INFO: enter 'restricted' command line mode
[11:04:36.300] <TB1> INFO: enter test to run
[11:04:36.300] <TB1> INFO: test: Highrate no parameter change
[11:04:36.300] <TB1> INFO: running: highrate
[11:04:36.300] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//phCalibrationFitErr35_C15.dat
[11:04:36.533] <TB1> INFO: ----------------------------------------------------------------------
[11:04:36.533] <TB1> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[11:04:36.533] <TB1> INFO: ----------------------------------------------------------------------
[11:04:36.538] <TB1> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 15 .. 75 (20/-1) hits flags = 896 (plus default)
[11:04:36.549] <TB1> INFO: dacScan step from 15 .. 34
[11:04:36.549] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[11:04:36.549] <TB1> INFO: run 1 of 1
[11:04:37.145] <TB1> INFO: Expecting 4160000 events.
[11:05:12.889] <TB1> INFO: 426500 events read in total (35214ms).
[11:05:47.893] <TB1> INFO: 854900 events read in total (70218ms).
[11:06:23.530] <TB1> INFO: 1283200 events read in total (105855ms).
[11:06:58.780] <TB1> INFO: 1711900 events read in total (141105ms).
[11:07:33.499] <TB1> INFO: 2140350 events read in total (175824ms).
[11:08:08.558] <TB1> INFO: 2568700 events read in total (210883ms).
[11:08:44.380] <TB1> INFO: 2996650 events read in total (246705ms).
[11:09:19.387] <TB1> INFO: 3424650 events read in total (281712ms).
[11:09:53.937] <TB1> INFO: 3852300 events read in total (316262ms).
[11:10:19.014] <TB1> INFO: 4160000 events read in total (341340ms).
[11:10:19.306] <TB1> INFO: Test took 342756ms.
[11:10:23.077] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:10:28.664] <TB1> INFO: dacScan step from 35 .. 54
[11:10:28.664] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[11:10:28.664] <TB1> INFO: run 1 of 1
[11:10:29.260] <TB1> INFO: Expecting 4160000 events.
[11:11:03.750] <TB1> INFO: 362050 events read in total (33963ms).
[11:11:36.034] <TB1> INFO: 724650 events read in total (66247ms).
[11:12:09.974] <TB1> INFO: 1086600 events read in total (100187ms).
[11:12:43.021] <TB1> INFO: 1447750 events read in total (133234ms).
[11:13:16.977] <TB1> INFO: 1807900 events read in total (167190ms).
[11:13:51.141] <TB1> INFO: 2166650 events read in total (201354ms).
[11:14:25.446] <TB1> INFO: 2523400 events read in total (235659ms).
[11:14:59.688] <TB1> INFO: 2877150 events read in total (269901ms).
[11:15:35.439] <TB1> INFO: 3228600 events read in total (305652ms).
[11:16:10.900] <TB1> INFO: 3577750 events read in total (341113ms).
[11:16:47.144] <TB1> INFO: 3926100 events read in total (377357ms).
[11:17:11.606] <TB1> INFO: 4160000 events read in total (401819ms).
[11:17:11.893] <TB1> INFO: Test took 403229ms.
[11:17:14.861] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:17:21.432] <TB1> INFO: dacScan step from 55 .. 74
[11:17:21.432] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[11:17:21.432] <TB1> INFO: run 1 of 1
[11:17:22.029] <TB1> INFO: Expecting 4160000 events.
[11:17:57.693] <TB1> INFO: 321550 events read in total (35115ms).
[11:18:33.508] <TB1> INFO: 643800 events read in total (70930ms).
[11:19:08.689] <TB1> INFO: 966000 events read in total (106111ms).
[11:19:44.476] <TB1> INFO: 1288300 events read in total (141898ms).
[11:20:20.470] <TB1> INFO: 1610550 events read in total (177892ms).
[11:20:56.092] <TB1> INFO: 1932500 events read in total (213514ms).
[11:21:29.420] <TB1> INFO: 2254850 events read in total (246842ms).
[11:22:04.681] <TB1> INFO: 2576950 events read in total (282103ms).
[11:22:40.603] <TB1> INFO: 2898950 events read in total (318025ms).
[11:23:17.067] <TB1> INFO: 3220900 events read in total (354489ms).
[11:23:52.806] <TB1> INFO: 3543100 events read in total (390228ms).
[11:24:27.008] <TB1> INFO: 3865250 events read in total (424430ms).
[11:24:59.655] <TB1> INFO: 4160000 events read in total (457077ms).
[11:24:59.831] <TB1> INFO: Test took 458399ms.
[11:25:01.588] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:25:07.691] <TB1> INFO: dacScan step from 75 .. 75
[11:25:07.691] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[11:25:07.691] <TB1> INFO: run 1 of 1
[11:25:08.286] <TB1> INFO: Expecting 208000 events.
[11:25:32.229] <TB1> INFO: 208000 events read in total (23416ms).
[11:25:32.237] <TB1> INFO: Test took 24545ms.
[11:25:32.322] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:25:32.588] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:33.770] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:34.862] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:35.991] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:37.143] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:38.306] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:39.471] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:40.603] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:41.749] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:42.894] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:44.020] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:45.160] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:46.288] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:47.436] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:48.573] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:49.703] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:25:50.833] <TB1> INFO: PixTest:: pg_setup set to default.
[11:25:50.835] <TB1> INFO: vcal mean: 39.06 38.46 37.75 41.68 41.88 43.50 42.31 43.37 43.42 41.49 43.73 41.43 41.21 38.32 38.57 38.69
[11:25:50.835] <TB1> INFO: vcal RMS: 1.18 1.18 0.91 1.46 1.22 1.53 1.42 1.47 1.59 1.40 1.55 1.48 1.25 1.12 1.02 1.06
[11:25:50.835] <TB1> INFO: number of X-ray hits detected: 223395 214621 196534 346578 371551 455593 401492 455262 448364 373912 444424 351436 326274 187385 203319 215940
[11:25:50.835] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:25:50.835] <TB1> INFO: X-ray hit rate [MHz/cm2]: 65.5 62.9 57.6 101.6 108.9 133.5 117.7 133.4 131.4 109.6 130.3 103.0 95.6 54.9 59.6 63.3
[11:25:50.835] <TB1> INFO: PixTestHighRate::doXNoiseMaps() done
[11:25:50.953] <TB1> INFO: enter test to run
[11:25:50.953] <TB1> INFO: test: no parameter change
[11:25:51.173] <TB1> QUIET: Connection to board 147 closed.
[11:25:51.255] <TB1> INFO: pXar: this is the end, my friend

[11:52:15.456] <TB1> INFO: *** Welcome to pxar ***
[11:52:15.456] <TB1> INFO: *** Today: 2016/02/08
[11:52:15.523] <TB1> INFO: *** Version: 9751
[11:52:15.523] <TB1> INFO: readRocDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[11:52:15.524] <TB1> INFO: readTbmDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[11:52:15.524] <TB1> INFO: readMaskFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[11:52:15.524] <TB1> INFO: readTrimFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[11:52:15.596] <TB1> INFO: clk: 4
[11:52:15.596] <TB1> INFO: ctr: 4
[11:52:15.596] <TB1> INFO: sda: 19
[11:52:15.596] <TB1> INFO: tin: 9
[11:52:15.596] <TB1> INFO: level: 15
[11:52:15.596] <TB1> INFO: triggerdelay: 0
[11:52:15.596] <TB1> QUIET: Instanciating API for pxar prod-12
[11:52:15.596] <TB1> INFO: Log level: INFO
[11:52:15.609] <TB1> INFO: Found DTB DTB_WWXTQT
[11:52:15.617] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:52:15.620] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:52:15.622] <TB1> INFO: RPC call hashes of host and DTB match: 398089610
[11:52:17.166] <TB1> INFO: DUT info:
[11:52:17.166] <TB1> INFO: The DUT currently contains the following objects:
[11:52:17.166] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:52:17.166] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:52:17.166] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:52:17.166] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:52:17.166] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.166] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:17.567] <TB1> INFO: enter 'restricted' command line mode
[11:52:17.567] <TB1> INFO: enter test to run
[11:52:17.567] <TB1> INFO: test: HighRate no parameter change
[11:52:17.568] <TB1> INFO: running: highrate
[11:52:17.568] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[11:52:17.721] <TB1> INFO: ----------------------------------------------------------------------
[11:52:17.721] <TB1> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[11:52:17.721] <TB1> INFO: ----------------------------------------------------------------------
[11:52:17.858] <TB1> INFO: Expecting 768 events.
[11:52:19.094] <TB1> INFO: 768 events read in total (517ms).
[11:52:19.188] <TB1> INFO: Test took 1462ms.
[11:52:19.803] <TB1> INFO: Expecting 41600 events.
[11:52:23.967] <TB1> INFO: 41600 events read in total (3637ms).
[11:52:23.968] <TB1> INFO: Test took 4776ms.
[11:52:24.048] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:52:24.701] <TB1> INFO: Expecting 41600 events.
[11:52:28.817] <TB1> INFO: 41600 events read in total (3589ms).
[11:52:28.820] <TB1> INFO: Test took 4743ms.
[11:52:28.914] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:52:29.571] <TB1> INFO: Expecting 41600 events.
[11:52:33.723] <TB1> INFO: 41600 events read in total (3625ms).
[11:52:33.725] <TB1> INFO: Test took 4767ms.
[11:52:33.804] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:52:34.446] <TB1> INFO: Expecting 41600 events.
[11:52:38.822] <TB1> INFO: 41600 events read in total (3849ms).
[11:52:38.824] <TB1> INFO: Test took 4990ms.
[11:52:38.908] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:52:39.559] <TB1> INFO: Expecting 41600 events.
[11:52:43.665] <TB1> INFO: 41600 events read in total (3579ms).
[11:52:43.667] <TB1> INFO: Test took 4727ms.
[11:52:43.749] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:52:44.391] <TB1> INFO: Expecting 41600 events.
[11:52:48.583] <TB1> INFO: 41600 events read in total (3665ms).
[11:52:48.585] <TB1> INFO: Test took 4806ms.
[11:52:48.665] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:52:49.306] <TB1> INFO: Expecting 41600 events.
[11:52:53.450] <TB1> INFO: 41600 events read in total (3617ms).
[11:52:53.452] <TB1> INFO: Test took 4757ms.
[11:52:53.532] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:52:54.174] <TB1> INFO: Expecting 41600 events.
[11:52:58.325] <TB1> INFO: 41600 events read in total (3624ms).
[11:52:58.327] <TB1> INFO: Test took 4765ms.
[11:52:58.407] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:52:59.049] <TB1> INFO: Expecting 41600 events.
[11:53:02.947] <TB1> INFO: 41600 events read in total (3371ms).
[11:53:02.949] <TB1> INFO: Test took 4511ms.
[11:53:03.032] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:03.675] <TB1> INFO: Expecting 41600 events.
[11:53:07.651] <TB1> INFO: 41600 events read in total (3449ms).
[11:53:07.652] <TB1> INFO: Test took 4589ms.
[11:53:07.742] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:08.406] <TB1> INFO: Expecting 41600 events.
[11:53:12.298] <TB1> INFO: 41600 events read in total (3365ms).
[11:53:12.301] <TB1> INFO: Test took 4521ms.
[11:53:12.393] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:13.054] <TB1> INFO: Expecting 41600 events.
[11:53:17.079] <TB1> INFO: 41600 events read in total (3498ms).
[11:53:17.081] <TB1> INFO: Test took 4651ms.
[11:53:17.173] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:17.816] <TB1> INFO: Expecting 41600 events.
[11:53:21.875] <TB1> INFO: 41600 events read in total (3532ms).
[11:53:21.877] <TB1> INFO: Test took 4672ms.
[11:53:21.970] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:22.618] <TB1> INFO: Expecting 41600 events.
[11:53:26.858] <TB1> INFO: 41600 events read in total (3713ms).
[11:53:26.860] <TB1> INFO: Test took 4853ms.
[11:53:26.943] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:27.585] <TB1> INFO: Expecting 41600 events.
[11:53:31.630] <TB1> INFO: 41600 events read in total (3518ms).
[11:53:31.632] <TB1> INFO: Test took 4658ms.
[11:53:31.716] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:32.367] <TB1> INFO: Expecting 41600 events.
[11:53:36.518] <TB1> INFO: 41600 events read in total (3624ms).
[11:53:36.520] <TB1> INFO: Test took 4770ms.
[11:53:36.603] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:37.246] <TB1> INFO: Expecting 41600 events.
[11:53:41.658] <TB1> INFO: 41600 events read in total (3885ms).
[11:53:41.660] <TB1> INFO: Test took 5025ms.
[11:53:41.742] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:42.384] <TB1> INFO: Expecting 41600 events.
[11:53:46.537] <TB1> INFO: 41600 events read in total (3626ms).
[11:53:46.539] <TB1> INFO: Test took 4766ms.
[11:53:46.622] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:47.263] <TB1> INFO: Expecting 41600 events.
[11:53:51.574] <TB1> INFO: 41600 events read in total (3784ms).
[11:53:51.576] <TB1> INFO: Test took 4924ms.
[11:53:51.657] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:52.300] <TB1> INFO: Expecting 41600 events.
[11:53:55.906] <TB1> INFO: 41600 events read in total (3079ms).
[11:53:55.908] <TB1> INFO: Test took 4220ms.
[11:53:55.990] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:56.300] <TB1> INFO: enter test to run
[11:53:56.300] <TB1> INFO: test: Pretest no parameter change
[11:53:56.300] <TB1> INFO: running: pretest
[11:53:56.301] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[11:53:56.301] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[11:53:56.301] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[11:53:56.301] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[11:53:56.301] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[11:53:56.301] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[11:53:56.301] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[11:53:56.301] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[11:53:56.301] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[11:53:56.301] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[11:53:56.302] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[11:53:56.302] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[11:53:56.302] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[11:53:56.302] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[11:53:56.302] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[11:53:56.302] <TB1> INFO: write dac parameters into /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[11:53:56.302] <TB1> INFO: enter test to run
[11:53:56.302] <TB1> INFO: test: no parameter change
[11:53:56.533] <TB1> QUIET: Connection to board 147 closed.
[11:53:56.613] <TB1> INFO: pXar: this is the end, my friend

[11:54:23.368] <TB1> INFO: *** Welcome to pxar ***
[11:54:23.368] <TB1> INFO: *** Today: 2016/02/08
[11:54:23.432] <TB1> INFO: *** Version: 9751
[11:54:23.432] <TB1> INFO: readRocDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//dacParameters35_C15.dat
[11:54:23.433] <TB1> INFO: readTbmDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//tbmParameters_C0b.dat
[11:54:23.433] <TB1> INFO: readMaskFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//defaultMaskFile.dat
[11:54:23.433] <TB1> INFO: readTrimFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//trimParameters35_C15.dat
[11:54:23.505] <TB1> INFO: clk: 4
[11:54:23.505] <TB1> INFO: ctr: 4
[11:54:23.505] <TB1> INFO: sda: 19
[11:54:23.505] <TB1> INFO: tin: 9
[11:54:23.505] <TB1> INFO: level: 15
[11:54:23.505] <TB1> INFO: triggerdelay: 0
[11:54:23.505] <TB1> QUIET: Instanciating API for pxar prod-12
[11:54:23.505] <TB1> INFO: Log level: INFO
[11:54:23.518] <TB1> INFO: Found DTB DTB_WWXTQT
[11:54:23.526] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:54:23.529] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:54:23.532] <TB1> INFO: RPC call hashes of host and DTB match: 398089610
[11:54:25.092] <TB1> INFO: DUT info:
[11:54:25.092] <TB1> INFO: The DUT currently contains the following objects:
[11:54:25.092] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:54:25.092] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:54:25.092] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:54:25.092] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:54:25.092] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.092] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:25.493] <TB1> INFO: enter 'restricted' command line mode
[11:54:25.493] <TB1> INFO: enter test to run
[11:54:25.493] <TB1> INFO: test: PixelAlive no parameter change
[11:54:25.493] <TB1> INFO: running: pixelalive
[11:54:25.497] <TB1> INFO: ######################################################################
[11:54:25.497] <TB1> INFO: PixTestAlive::doTest()
[11:54:25.497] <TB1> INFO: ######################################################################
[11:54:25.499] <TB1> INFO: ----------------------------------------------------------------------
[11:54:25.499] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:54:25.499] <TB1> INFO: ----------------------------------------------------------------------
[11:54:25.823] <TB1> INFO: Expecting 208000 events.
[11:54:37.883] <TB1> INFO: 208000 events read in total (11341ms).
[11:54:37.895] <TB1> INFO: Test took 12395ms.
[11:54:37.902] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:54:38.156] <TB1> INFO: PixTestAlive::aliveTest() done
[11:54:38.156] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:54:38.158] <TB1> INFO: ----------------------------------------------------------------------
[11:54:38.158] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:54:38.158] <TB1> INFO: ----------------------------------------------------------------------
[11:54:38.461] <TB1> INFO: Expecting 208000 events.
[11:54:46.550] <TB1> INFO: 208000 events read in total (7373ms).
[11:54:46.550] <TB1> INFO: Test took 8391ms.
[11:54:46.550] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:54:46.550] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:54:46.864] <TB1> INFO: PixTestAlive::maskTest() done
[11:54:46.864] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:54:46.866] <TB1> INFO: ----------------------------------------------------------------------
[11:54:46.866] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:54:46.866] <TB1> INFO: ----------------------------------------------------------------------
[11:54:47.170] <TB1> INFO: Expecting 208000 events.
[11:54:58.772] <TB1> INFO: 208000 events read in total (10886ms).
[11:54:58.772] <TB1> INFO: Test took 11905ms.
[11:54:58.779] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:54:58.997] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:54:58.997] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:54:58.997] <TB1> INFO: PixTestAlive::doTest() done, duration: 33 seconds
[11:54:59.034] <TB1> INFO: enter test to run
[11:54:59.034] <TB1> INFO: test: delay setting parameters: ->2<-
[11:54:59.034] <TB1> INFO: delay test by 2 seconds...
[11:55:01.034] <TB1> INFO: enter test to run
[11:55:01.034] <TB1> INFO: test: HighRate no parameter change
[11:55:01.034] <TB1> INFO: running: highrate
[11:55:01.034] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//phCalibrationFitErr35_C15.dat
[11:55:01.211] <TB1> INFO: ----------------------------------------------------------------------
[11:55:01.211] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:55:01.211] <TB1> INFO: ----------------------------------------------------------------------
[11:55:01.835] <TB1> INFO: Expecting 208000 events.
[11:55:15.986] <TB1> INFO: 208000 events read in total (13624ms).
[11:55:15.992] <TB1> INFO: Test took 14777ms.
[11:55:16.291] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:55:16.583] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:55:16.583] <TB1> INFO: number of red-efficiency pixels: 190 114 107 259 271 400 303 367 356 277 394 233 260 116 105 129
[11:55:16.583] <TB1> INFO: number of X-ray hits detected: 111348 105806 95142 173337 186911 231993 201786 231306 226946 183946 226532 172998 163121 90844 99032 106149
[11:55:16.583] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:55:16.583] <TB1> INFO: number of Vcal hits detected: 207805 207884 207890 207726 207712 207568 207669 207612 207626 207712 207573 207751 207732 207880 207895 207870
[11:55:16.583] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 100.0 99.9 99.9 99.8 99.9 99.8 99.8 99.9 99.8 99.9 99.9 100.0 99.9 99.9
[11:55:16.583] <TB1> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.9 99.9 99.8 99.8 99.8 99.8 99.9 99.8 99.9 99.9 99.9 99.9 99.9
[11:55:16.583] <TB1> INFO: X-ray hit rate [MHz/cm2]: 32.6 31.0 27.9 50.8 54.8 68.0 59.1 67.8 66.5 53.9 66.4 50.7 47.8 26.6 29.0 31.1
[11:55:16.583] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:55:16.611] <TB1> INFO: PixTest:: pg_setup set to default.
[11:55:16.620] <TB1> INFO: enter test to run
[11:55:16.620] <TB1> INFO: test: no parameter change
[11:55:16.829] <TB1> QUIET: Connection to board 147 closed.
[11:55:16.910] <TB1> INFO: pXar: this is the end, my friend

[11:55:48.132] <TB1> INFO: *** Welcome to pxar ***
[11:55:48.132] <TB1> INFO: *** Today: 2016/02/08
[11:55:48.198] <TB1> INFO: *** Version: 9751
[11:55:48.199] <TB1> INFO: readRocDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//dacParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//dacParameters35_C15.dat
[11:55:48.199] <TB1> INFO: readTbmDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//tbmParameters_C0a.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//tbmParameters_C0b.dat
[11:55:48.199] <TB1> INFO: readMaskFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//defaultMaskFile.dat
[11:55:48.199] <TB1> INFO: readTrimFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//trimParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//trimParameters35_C15.dat
[11:55:48.272] <TB1> INFO: clk: 4
[11:55:48.272] <TB1> INFO: ctr: 4
[11:55:48.272] <TB1> INFO: sda: 19
[11:55:48.272] <TB1> INFO: tin: 9
[11:55:48.272] <TB1> INFO: level: 15
[11:55:48.272] <TB1> INFO: triggerdelay: 0
[11:55:48.272] <TB1> QUIET: Instanciating API for pxar prod-12
[11:55:48.272] <TB1> INFO: Log level: INFO
[11:55:48.285] <TB1> INFO: Found DTB DTB_WWXTQT
[11:55:48.293] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:55:48.296] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:55:48.299] <TB1> INFO: RPC call hashes of host and DTB match: 398089610
[11:55:49.858] <TB1> INFO: DUT info:
[11:55:49.858] <TB1> INFO: The DUT currently contains the following objects:
[11:55:49.858] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:55:49.858] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:55:49.858] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:55:49.858] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:55:49.858] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:49.858] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:50.259] <TB1> INFO: enter 'restricted' command line mode
[11:55:50.259] <TB1> INFO: enter test to run
[11:55:50.259] <TB1> INFO: test: PixelAlive no parameter change
[11:55:50.259] <TB1> INFO: running: pixelalive
[11:55:50.263] <TB1> INFO: ######################################################################
[11:55:50.263] <TB1> INFO: PixTestAlive::doTest()
[11:55:50.263] <TB1> INFO: ######################################################################
[11:55:50.265] <TB1> INFO: ----------------------------------------------------------------------
[11:55:50.265] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:55:50.265] <TB1> INFO: ----------------------------------------------------------------------
[11:55:50.572] <TB1> INFO: Expecting 208000 events.
[11:56:02.749] <TB1> INFO: 208000 events read in total (11459ms).
[11:56:02.772] <TB1> INFO: Test took 12506ms.
[11:56:02.779] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:56:03.033] <TB1> INFO: PixTestAlive::aliveTest() done
[11:56:03.033] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:56:03.034] <TB1> INFO: ----------------------------------------------------------------------
[11:56:03.034] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:56:03.034] <TB1> INFO: ----------------------------------------------------------------------
[11:56:03.337] <TB1> INFO: Expecting 208000 events.
[11:56:11.739] <TB1> INFO: 208000 events read in total (7686ms).
[11:56:11.740] <TB1> INFO: Test took 8704ms.
[11:56:11.740] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:56:11.740] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:56:12.042] <TB1> INFO: PixTestAlive::maskTest() done
[11:56:12.042] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:56:12.043] <TB1> INFO: ----------------------------------------------------------------------
[11:56:12.043] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:56:12.043] <TB1> INFO: ----------------------------------------------------------------------
[11:56:12.352] <TB1> INFO: Expecting 208000 events.
[11:56:24.015] <TB1> INFO: 208000 events read in total (10948ms).
[11:56:24.015] <TB1> INFO: Test took 11971ms.
[11:56:24.025] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:56:24.250] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:56:24.250] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:56:24.250] <TB1> INFO: PixTestAlive::doTest() done, duration: 33 seconds
[11:56:24.286] <TB1> INFO: enter test to run
[11:56:24.286] <TB1> INFO: test: delay setting parameters: ->2<-
[11:56:24.286] <TB1> INFO: delay test by 2 seconds...
[11:56:26.286] <TB1> INFO: enter test to run
[11:56:26.286] <TB1> INFO: test: HighRate no parameter change
[11:56:26.286] <TB1> INFO: running: highrate
[11:56:26.286] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//phCalibrationFitErr35_C15.dat
[11:56:26.418] <TB1> INFO: ----------------------------------------------------------------------
[11:56:26.418] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:56:26.418] <TB1> INFO: ----------------------------------------------------------------------
[11:56:27.023] <TB1> INFO: Expecting 208000 events.
[11:56:43.582] <TB1> INFO: 208000 events read in total (16032ms).
[11:56:43.590] <TB1> INFO: Test took 17168ms.
[11:56:44.008] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:56:44.383] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:56:44.383] <TB1> INFO: number of red-efficiency pixels: 291 203 223 507 576 839 663 764 830 548 773 519 442 214 186 215
[11:56:44.383] <TB1> INFO: number of X-ray hits detected: 163963 155074 141644 254375 273622 336720 293715 336431 330439 270208 329560 253347 237547 133907 147929 156199
[11:56:44.383] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:56:44.383] <TB1> INFO: number of Vcal hits detected: 207691 207789 207754 207453 207350 206984 207205 207112 207039 207386 207102 207413 207502 207769 207811 207779
[11:56:44.383] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.8 99.7 99.6 99.7 99.6 99.6 99.7 99.6 99.7 99.8 99.9 99.9 99.9
[11:56:44.383] <TB1> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.7 99.7 99.5 99.6 99.6 99.5 99.7 99.6 99.7 99.8 99.9 99.9 99.9
[11:56:44.383] <TB1> INFO: X-ray hit rate [MHz/cm2]: 48.1 45.5 41.5 74.6 80.2 98.7 86.1 98.6 96.9 79.2 96.6 74.3 69.6 39.2 43.4 45.8
[11:56:44.383] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:56:44.412] <TB1> INFO: PixTest:: pg_setup set to default.
[11:56:44.423] <TB1> INFO: enter test to run
[11:56:44.423] <TB1> INFO: test: no parameter change
[11:56:44.649] <TB1> QUIET: Connection to board 147 closed.
[11:56:44.728] <TB1> INFO: pXar: this is the end, my friend

[11:57:13.762] <TB1> INFO: *** Welcome to pxar ***
[11:57:13.762] <TB1> INFO: *** Today: 2016/02/08
[11:57:13.825] <TB1> INFO: *** Version: 9751
[11:57:13.825] <TB1> INFO: readRocDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//dacParameters35_C15.dat
[11:57:13.825] <TB1> INFO: readTbmDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//tbmParameters_C0b.dat
[11:57:13.825] <TB1> INFO: readMaskFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//defaultMaskFile.dat
[11:57:13.825] <TB1> INFO: readTrimFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//trimParameters35_C15.dat
[11:57:13.899] <TB1> INFO: clk: 4
[11:57:13.899] <TB1> INFO: ctr: 4
[11:57:13.899] <TB1> INFO: sda: 19
[11:57:13.899] <TB1> INFO: tin: 9
[11:57:13.899] <TB1> INFO: level: 15
[11:57:13.899] <TB1> INFO: triggerdelay: 0
[11:57:13.900] <TB1> QUIET: Instanciating API for pxar prod-12
[11:57:13.900] <TB1> INFO: Log level: INFO
[11:57:13.912] <TB1> INFO: Found DTB DTB_WWXTQT
[11:57:13.921] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:57:13.924] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:57:13.926] <TB1> INFO: RPC call hashes of host and DTB match: 398089610
[11:57:15.476] <TB1> INFO: DUT info:
[11:57:15.476] <TB1> INFO: The DUT currently contains the following objects:
[11:57:15.476] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:57:15.476] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:57:15.476] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:57:15.476] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:57:15.476] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.476] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:15.877] <TB1> INFO: enter 'restricted' command line mode
[11:57:15.877] <TB1> INFO: enter test to run
[11:57:15.877] <TB1> INFO: test: PixelAlive no parameter change
[11:57:15.877] <TB1> INFO: running: pixelalive
[11:57:15.882] <TB1> INFO: ######################################################################
[11:57:15.883] <TB1> INFO: PixTestAlive::doTest()
[11:57:15.883] <TB1> INFO: ######################################################################
[11:57:15.884] <TB1> INFO: ----------------------------------------------------------------------
[11:57:15.884] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:57:15.884] <TB1> INFO: ----------------------------------------------------------------------
[11:57:16.224] <TB1> INFO: Expecting 208000 events.
[11:57:28.560] <TB1> INFO: 208000 events read in total (11618ms).
[11:57:28.562] <TB1> INFO: Test took 12676ms.
[11:57:28.573] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:57:28.835] <TB1> INFO: PixTestAlive::aliveTest() done
[11:57:28.835] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:57:28.837] <TB1> INFO: ----------------------------------------------------------------------
[11:57:28.837] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:57:28.837] <TB1> INFO: ----------------------------------------------------------------------
[11:57:29.177] <TB1> INFO: Expecting 208000 events.
[11:57:37.402] <TB1> INFO: 208000 events read in total (7509ms).
[11:57:37.404] <TB1> INFO: Test took 8566ms.
[11:57:37.404] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:57:37.404] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:57:37.713] <TB1> INFO: PixTestAlive::maskTest() done
[11:57:37.713] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:57:37.715] <TB1> INFO: ----------------------------------------------------------------------
[11:57:37.715] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:57:37.715] <TB1> INFO: ----------------------------------------------------------------------
[11:57:38.034] <TB1> INFO: Expecting 208000 events.
[11:57:49.829] <TB1> INFO: 208000 events read in total (11079ms).
[11:57:49.830] <TB1> INFO: Test took 12114ms.
[11:57:49.841] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:57:50.067] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:57:50.067] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:57:50.067] <TB1> INFO: PixTestAlive::doTest() done, duration: 34 seconds
[11:57:50.097] <TB1> INFO: enter test to run
[11:57:50.097] <TB1> INFO: test: delay setting parameters: ->2<-
[11:57:50.097] <TB1> INFO: delay test by 2 seconds...
[11:57:52.097] <TB1> INFO: enter test to run
[11:57:52.097] <TB1> INFO: test: HighRate no parameter change
[11:57:52.097] <TB1> INFO: running: highrate
[11:57:52.097] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//phCalibrationFitErr35_C15.dat
[11:57:52.244] <TB1> INFO: ----------------------------------------------------------------------
[11:57:52.244] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:57:52.244] <TB1> INFO: ----------------------------------------------------------------------
[11:57:52.857] <TB1> INFO: Expecting 208000 events.
[11:58:12.235] <TB1> INFO: 208000 events read in total (18851ms).
[11:58:12.247] <TB1> INFO: Test took 20000ms.
[11:58:12.857] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:58:13.236] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:58:13.236] <TB1> INFO: number of red-efficiency pixels: 510 394 388 887 1086 1520 1261 1531 1520 1025 1468 950 821 410 327 392
[11:58:13.236] <TB1> INFO: number of X-ray hits detected: 224556 214455 197104 347076 372634 457499 402042 458281 448455 371969 448739 346574 326631 187888 204865 215558
[11:58:13.236] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:58:13.236] <TB1> INFO: number of Vcal hits detected: 207438 207580 207540 206901 206598 205737 206227 205944 205955 206686 205915 206782 207012 207532 207656 207584
[11:58:13.236] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.7 99.8 99.8 99.5 99.4 99.1 99.3 99.1 99.1 99.4 99.1 99.5 99.6 99.8 99.8 99.8
[11:58:13.236] <TB1> INFO: Vcal hit overall efficiency (%): 99.7 99.8 99.8 99.5 99.3 98.9 99.1 99.0 99.0 99.4 99.0 99.4 99.5 99.8 99.8 99.8
[11:58:13.236] <TB1> INFO: X-ray hit rate [MHz/cm2]: 65.8 62.9 57.8 101.7 109.2 134.1 117.8 134.3 131.4 109.0 131.5 101.6 95.7 55.1 60.0 63.2
[11:58:13.236] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:58:13.265] <TB1> INFO: PixTest:: pg_setup set to default.
[11:58:13.276] <TB1> INFO: enter test to run
[11:58:13.276] <TB1> INFO: test: no parameter change
[11:58:13.512] <TB1> QUIET: Connection to board 147 closed.
[11:58:13.591] <TB1> INFO: pXar: this is the end, my friend

[11:58:41.246] <TB1> INFO: *** Welcome to pxar ***
[11:58:41.246] <TB1> INFO: *** Today: 2016/02/08
[11:58:41.313] <TB1> INFO: *** Version: 9751
[11:58:41.313] <TB1> INFO: readRocDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//dacParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//dacParameters35_C15.dat
[11:58:41.314] <TB1> INFO: readTbmDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//tbmParameters_C0a.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//tbmParameters_C0b.dat
[11:58:41.314] <TB1> INFO: readMaskFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//defaultMaskFile.dat
[11:58:41.314] <TB1> INFO: readTrimFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//trimParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//trimParameters35_C15.dat
[11:58:41.389] <TB1> INFO: clk: 4
[11:58:41.389] <TB1> INFO: ctr: 4
[11:58:41.389] <TB1> INFO: sda: 19
[11:58:41.389] <TB1> INFO: tin: 9
[11:58:41.389] <TB1> INFO: level: 15
[11:58:41.389] <TB1> INFO: triggerdelay: 0
[11:58:41.389] <TB1> QUIET: Instanciating API for pxar prod-12
[11:58:41.389] <TB1> INFO: Log level: INFO
[11:58:41.404] <TB1> INFO: Found DTB DTB_WWXTQT
[11:58:41.412] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:58:41.415] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:58:41.418] <TB1> INFO: RPC call hashes of host and DTB match: 398089610
[11:58:42.964] <TB1> INFO: DUT info:
[11:58:42.964] <TB1> INFO: The DUT currently contains the following objects:
[11:58:42.964] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:58:42.964] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:58:42.964] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:58:42.964] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:58:42.964] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.964] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.964] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.964] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.964] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.964] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.964] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.964] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.964] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.965] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.965] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.965] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.965] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.965] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.965] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:42.965] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:43.365] <TB1> INFO: enter 'restricted' command line mode
[11:58:43.365] <TB1> INFO: enter test to run
[11:58:43.365] <TB1> INFO: test: PixelAlive no parameter change
[11:58:43.365] <TB1> INFO: running: pixelalive
[11:58:43.371] <TB1> INFO: ######################################################################
[11:58:43.371] <TB1> INFO: PixTestAlive::doTest()
[11:58:43.371] <TB1> INFO: ######################################################################
[11:58:43.372] <TB1> INFO: ----------------------------------------------------------------------
[11:58:43.372] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:58:43.372] <TB1> INFO: ----------------------------------------------------------------------
[11:58:43.708] <TB1> INFO: Expecting 208000 events.
[11:58:56.241] <TB1> INFO: 208000 events read in total (11816ms).
[11:58:56.244] <TB1> INFO: Test took 12871ms.
[11:58:56.254] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:58:56.515] <TB1> INFO: PixTestAlive::aliveTest() done
[11:58:56.515] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:58:56.517] <TB1> INFO: ----------------------------------------------------------------------
[11:58:56.517] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:58:56.517] <TB1> INFO: ----------------------------------------------------------------------
[11:58:56.820] <TB1> INFO: Expecting 208000 events.
[11:59:05.046] <TB1> INFO: 208000 events read in total (7510ms).
[11:59:05.047] <TB1> INFO: Test took 8529ms.
[11:59:05.047] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:59:05.047] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:59:05.355] <TB1> INFO: PixTestAlive::maskTest() done
[11:59:05.355] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:59:05.357] <TB1> INFO: ----------------------------------------------------------------------
[11:59:05.357] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:59:05.357] <TB1> INFO: ----------------------------------------------------------------------
[11:59:05.664] <TB1> INFO: Expecting 208000 events.
[11:59:17.494] <TB1> INFO: 208000 events read in total (11115ms).
[11:59:17.495] <TB1> INFO: Test took 12137ms.
[11:59:17.504] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:59:17.736] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:59:17.736] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:59:17.736] <TB1> INFO: PixTestAlive::doTest() done, duration: 34 seconds
[11:59:17.769] <TB1> INFO: enter test to run
[11:59:17.769] <TB1> INFO: test: delay setting parameters: ->2<-
[11:59:17.769] <TB1> INFO: delay test by 2 seconds...
[11:59:19.769] <TB1> INFO: enter test to run
[11:59:19.769] <TB1> INFO: test: HighRate no parameter change
[11:59:19.769] <TB1> INFO: running: highrate
[11:59:19.770] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//phCalibrationFitErr35_C15.dat
[11:59:19.966] <TB1> INFO: ----------------------------------------------------------------------
[11:59:19.966] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:59:19.966] <TB1> INFO: ----------------------------------------------------------------------
[11:59:20.564] <TB1> INFO: Expecting 208000 events.
[11:59:42.278] <TB1> INFO: 208000 events read in total (21187ms).
[11:59:42.298] <TB1> INFO: Test took 22329ms.
[11:59:43.064] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:59:43.523] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:59:43.523] <TB1> INFO: number of red-efficiency pixels: 760 584 535 1314 1551 2178 1756 2242 2140 1547 2059 1397 1262 547 444 559
[11:59:43.523] <TB1> INFO: number of X-ray hits detected: 272949 261904 240875 421517 452407 552916 487677 551237 545866 450311 542963 420710 396665 229772 250267 261747
[11:59:43.523] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:59:43.523] <TB1> INFO: number of Vcal hits detected: 207117 207360 207250 206163 205617 203989 205012 204307 204531 205704 204401 205961 206312 207253 207525 207376
[11:59:43.523] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.6 99.7 99.7 99.2 99.0 98.4 98.8 98.4 98.5 99.0 98.5 99.2 99.3 99.7 99.8 99.7
[11:59:43.523] <TB1> INFO: Vcal hit overall efficiency (%): 99.6 99.7 99.6 99.1 98.9 98.1 98.6 98.2 98.3 98.9 98.3 99.0 99.2 99.6 99.8 99.7
[11:59:43.523] <TB1> INFO: X-ray hit rate [MHz/cm2]: 80.0 76.8 70.6 123.5 132.6 162.1 142.9 161.6 160.0 132.0 159.1 123.3 116.3 67.3 73.4 76.7
[11:59:43.523] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:59:43.552] <TB1> INFO: PixTest:: pg_setup set to default.
[11:59:43.563] <TB1> INFO: enter test to run
[11:59:43.563] <TB1> INFO: test: no parameter change
[11:59:43.775] <TB1> QUIET: Connection to board 147 closed.
[11:59:43.855] <TB1> INFO: pXar: this is the end, my friend

[12:00:13.920] <TB1> INFO: *** Welcome to pxar ***
[12:00:13.920] <TB1> INFO: *** Today: 2016/02/08
[12:00:13.985] <TB1> INFO: *** Version: 9751
[12:00:13.985] <TB1> INFO: readRocDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//dacParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//dacParameters35_C15.dat
[12:00:13.986] <TB1> INFO: readTbmDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//tbmParameters_C0a.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//tbmParameters_C0b.dat
[12:00:13.986] <TB1> INFO: readMaskFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//defaultMaskFile.dat
[12:00:13.986] <TB1> INFO: readTrimFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//trimParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//trimParameters35_C15.dat
[12:00:14.076] <TB1> INFO: clk: 4
[12:00:14.076] <TB1> INFO: ctr: 4
[12:00:14.076] <TB1> INFO: sda: 19
[12:00:14.076] <TB1> INFO: tin: 9
[12:00:14.076] <TB1> INFO: level: 15
[12:00:14.076] <TB1> INFO: triggerdelay: 0
[12:00:14.076] <TB1> QUIET: Instanciating API for pxar prod-12
[12:00:14.076] <TB1> INFO: Log level: INFO
[12:00:14.088] <TB1> INFO: Found DTB DTB_WWXTQT
[12:00:14.097] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[12:00:14.100] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[12:00:14.102] <TB1> INFO: RPC call hashes of host and DTB match: 398089610
[12:00:15.644] <TB1> INFO: DUT info:
[12:00:15.644] <TB1> INFO: The DUT currently contains the following objects:
[12:00:15.644] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[12:00:15.644] <TB1> INFO: TBM Core alpha (0): 7 registers set
[12:00:15.644] <TB1> INFO: TBM Core beta (1): 7 registers set
[12:00:15.644] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:00:15.644] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:15.644] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:16.045] <TB1> INFO: enter 'restricted' command line mode
[12:00:16.045] <TB1> INFO: enter test to run
[12:00:16.045] <TB1> INFO: test: PixelAlive no parameter change
[12:00:16.045] <TB1> INFO: running: pixelalive
[12:00:16.049] <TB1> INFO: ######################################################################
[12:00:16.049] <TB1> INFO: PixTestAlive::doTest()
[12:00:16.049] <TB1> INFO: ######################################################################
[12:00:16.051] <TB1> INFO: ----------------------------------------------------------------------
[12:00:16.051] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:00:16.051] <TB1> INFO: ----------------------------------------------------------------------
[12:00:16.356] <TB1> INFO: Expecting 208000 events.
[12:00:28.887] <TB1> INFO: 208000 events read in total (11813ms).
[12:00:28.889] <TB1> INFO: Test took 12837ms.
[12:00:28.898] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:00:29.156] <TB1> INFO: PixTestAlive::aliveTest() done
[12:00:29.156] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:00:29.158] <TB1> INFO: ----------------------------------------------------------------------
[12:00:29.158] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:00:29.158] <TB1> INFO: ----------------------------------------------------------------------
[12:00:29.503] <TB1> INFO: Expecting 208000 events.
[12:00:38.046] <TB1> INFO: 208000 events read in total (7828ms).
[12:00:38.047] <TB1> INFO: Test took 8887ms.
[12:00:38.047] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:00:38.047] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[12:00:38.353] <TB1> INFO: PixTestAlive::maskTest() done
[12:00:38.353] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:00:38.355] <TB1> INFO: ----------------------------------------------------------------------
[12:00:38.355] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:00:38.355] <TB1> INFO: ----------------------------------------------------------------------
[12:00:38.678] <TB1> INFO: Expecting 208000 events.
[12:00:50.289] <TB1> INFO: 208000 events read in total (10895ms).
[12:00:50.289] <TB1> INFO: Test took 11933ms.
[12:00:50.299] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:00:50.524] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[12:00:50.524] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:00:50.524] <TB1> INFO: PixTestAlive::doTest() done, duration: 34 seconds
[12:00:50.563] <TB1> INFO: enter test to run
[12:00:50.563] <TB1> INFO: test: delay setting parameters: ->2<-
[12:00:50.563] <TB1> INFO: delay test by 2 seconds...
[12:00:52.563] <TB1> INFO: enter test to run
[12:00:52.563] <TB1> INFO: test: HighRate no parameter change
[12:00:52.563] <TB1> INFO: running: highrate
[12:00:52.563] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//phCalibrationFitErr35_C15.dat
[12:00:52.698] <TB1> INFO: ----------------------------------------------------------------------
[12:00:52.698] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[12:00:52.698] <TB1> INFO: ----------------------------------------------------------------------
[12:00:53.299] <TB1> INFO: Expecting 208000 events.
[12:01:18.291] <TB1> INFO: 208000 events read in total (24465ms).
[12:01:18.306] <TB1> INFO: Test took 25604ms.
[12:01:19.110] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:01:19.573] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:01:19.573] <TB1> INFO: number of red-efficiency pixels: 1136 794 750 1829 2174 2905 2375 2967 2877 2147 2855 1909 1748 747 661 809
[12:01:19.573] <TB1> INFO: number of X-ray hits detected: 324729 313560 287644 499818 536693 654965 579973 655679 647043 539317 643361 499016 473550 276615 299140 314698
[12:01:19.573] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[12:01:19.573] <TB1> INFO: number of Vcal hits detected: 206590 207091 206815 205042 203987 201234 203048 201768 202207 204229 201956 204751 205194 206783 207253 207042
[12:01:19.573] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.4 99.6 99.5 98.8 98.3 97.2 98.0 97.3 97.5 98.4 97.4 98.7 98.8 99.5 99.7 99.6
[12:01:19.573] <TB1> INFO: Vcal hit overall efficiency (%): 99.3 99.6 99.4 98.6 98.1 96.7 97.6 97.0 97.2 98.2 97.1 98.4 98.7 99.4 99.6 99.5
[12:01:19.573] <TB1> INFO: X-ray hit rate [MHz/cm2]: 95.2 91.9 84.3 146.5 157.3 192.0 170.0 192.2 189.7 158.1 188.6 146.3 138.8 81.1 87.7 92.2
[12:01:19.573] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[12:01:19.599] <TB1> INFO: PixTest:: pg_setup set to default.
[12:01:19.611] <TB1> INFO: enter test to run
[12:01:19.611] <TB1> INFO: test: no parameter change
[12:01:19.871] <TB1> QUIET: Connection to board 147 closed.
[12:01:19.953] <TB1> INFO: pXar: this is the end, my friend

[12:01:47.284] <TB1> INFO: *** Welcome to pxar ***
[12:01:47.284] <TB1> INFO: *** Today: 2016/02/08
[12:01:47.349] <TB1> INFO: *** Version: 9751
[12:01:47.349] <TB1> INFO: readRocDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//dacParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//dacParameters35_C15.dat
[12:01:47.350] <TB1> INFO: readTbmDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//tbmParameters_C0a.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//tbmParameters_C0b.dat
[12:01:47.350] <TB1> INFO: readMaskFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//defaultMaskFile.dat
[12:01:47.350] <TB1> INFO: readTrimFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//trimParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//trimParameters35_C15.dat
[12:01:47.423] <TB1> INFO: clk: 4
[12:01:47.423] <TB1> INFO: ctr: 4
[12:01:47.423] <TB1> INFO: sda: 19
[12:01:47.423] <TB1> INFO: tin: 9
[12:01:47.423] <TB1> INFO: level: 15
[12:01:47.423] <TB1> INFO: triggerdelay: 0
[12:01:47.423] <TB1> QUIET: Instanciating API for pxar prod-12
[12:01:47.423] <TB1> INFO: Log level: INFO
[12:01:47.435] <TB1> INFO: Found DTB DTB_WWXTQT
[12:01:47.444] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[12:01:47.447] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[12:01:47.449] <TB1> INFO: RPC call hashes of host and DTB match: 398089610
[12:01:49.006] <TB1> INFO: DUT info:
[12:01:49.006] <TB1> INFO: The DUT currently contains the following objects:
[12:01:49.006] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[12:01:49.006] <TB1> INFO: TBM Core alpha (0): 7 registers set
[12:01:49.006] <TB1> INFO: TBM Core beta (1): 7 registers set
[12:01:49.006] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:01:49.006] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.006] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:49.407] <TB1> INFO: enter 'restricted' command line mode
[12:01:49.407] <TB1> INFO: enter test to run
[12:01:49.407] <TB1> INFO: test: PixelAlive no parameter change
[12:01:49.407] <TB1> INFO: running: pixelalive
[12:01:49.411] <TB1> INFO: ######################################################################
[12:01:49.411] <TB1> INFO: PixTestAlive::doTest()
[12:01:49.411] <TB1> INFO: ######################################################################
[12:01:49.412] <TB1> INFO: ----------------------------------------------------------------------
[12:01:49.412] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:01:49.412] <TB1> INFO: ----------------------------------------------------------------------
[12:01:49.729] <TB1> INFO: Expecting 208000 events.
[12:02:02.014] <TB1> INFO: 208000 events read in total (11567ms).
[12:02:02.030] <TB1> INFO: Test took 12616ms.
[12:02:02.039] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:02:02.288] <TB1> INFO: PixTestAlive::aliveTest() done
[12:02:02.288] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:02:02.289] <TB1> INFO: ----------------------------------------------------------------------
[12:02:02.289] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:02:02.290] <TB1> INFO: ----------------------------------------------------------------------
[12:02:02.624] <TB1> INFO: Expecting 208000 events.
[12:02:11.036] <TB1> INFO: 208000 events read in total (7697ms).
[12:02:11.037] <TB1> INFO: Test took 8746ms.
[12:02:11.037] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:02:11.038] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[12:02:11.344] <TB1> INFO: PixTestAlive::maskTest() done
[12:02:11.344] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:02:11.346] <TB1> INFO: ----------------------------------------------------------------------
[12:02:11.346] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:02:11.346] <TB1> INFO: ----------------------------------------------------------------------
[12:02:11.654] <TB1> INFO: Expecting 208000 events.
[12:02:23.510] <TB1> INFO: 208000 events read in total (11140ms).
[12:02:23.510] <TB1> INFO: Test took 12163ms.
[12:02:23.522] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:02:23.753] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[12:02:23.753] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:02:23.754] <TB1> INFO: PixTestAlive::doTest() done, duration: 34 seconds
[12:02:23.783] <TB1> INFO: enter test to run
[12:02:23.783] <TB1> INFO: test: delay setting parameters: ->2<-
[12:02:23.783] <TB1> INFO: delay test by 2 seconds...
[12:02:25.783] <TB1> INFO: enter test to run
[12:02:25.783] <TB1> INFO: test: HighRate no parameter change
[12:02:25.783] <TB1> INFO: running: highrate
[12:02:25.783] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//phCalibrationFitErr35_C15.dat
[12:02:25.923] <TB1> INFO: ----------------------------------------------------------------------
[12:02:25.923] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[12:02:25.923] <TB1> INFO: ----------------------------------------------------------------------
[12:02:26.537] <TB1> INFO: Expecting 208000 events.
[12:02:58.108] <TB1> INFO: 208000 events read in total (31044ms).
[12:02:58.130] <TB1> INFO: Test took 32203ms.
[12:02:59.192] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:02:59.745] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:02:59.745] <TB1> INFO: number of red-efficiency pixels: 1976 1571 1255 2942 3291 3874 3474 3920 3866 3276 3821 3040 2836 1270 1231 1529
[12:02:59.745] <TB1> INFO: number of X-ray hits detected: 439502 427894 392840 671480 718624 876394 780003 875530 867385 727078 863866 675009 635400 378578 406982 425169
[12:02:59.745] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[12:02:59.745] <TB1> INFO: number of Vcal hits detected: 204908 205841 205099 200960 198665 192103 196239 192819 193539 198541 193424 200122 201485 205114 206415 205868
[12:02:59.745] <TB1> INFO: Vcal hit fiducial efficiency (%): 98.7 99.1 98.9 97.0 96.0 93.3 95.1 93.3 93.7 96.0 93.8 96.7 97.3 98.9 99.3 99.1
[12:02:59.745] <TB1> INFO: Vcal hit overall efficiency (%): 98.5 99.0 98.6 96.6 95.5 92.4 94.3 92.7 93.0 95.5 93.0 96.2 96.9 98.6 99.2 99.0
[12:02:59.745] <TB1> INFO: X-ray hit rate [MHz/cm2]: 128.8 125.4 115.1 196.8 210.6 256.9 228.6 256.6 254.2 213.1 253.2 197.9 186.2 111.0 119.3 124.6
[12:02:59.745] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[12:02:59.772] <TB1> INFO: PixTest:: pg_setup set to default.
[12:02:59.784] <TB1> INFO: enter test to run
[12:02:59.784] <TB1> INFO: test: no parameter change
[12:03:00.079] <TB1> QUIET: Connection to board 147 closed.
[12:03:00.159] <TB1> INFO: pXar: this is the end, my friend

[12:03:24.051] <TB1> INFO: *** Welcome to pxar ***
[12:03:24.051] <TB1> INFO: *** Today: 2016/02/08
[12:03:24.121] <TB1> INFO: *** Version: 9751
[12:03:24.121] <TB1> INFO: readRocDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//dacParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//dacParameters35_C15.dat
[12:03:24.122] <TB1> INFO: readTbmDacs: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//tbmParameters_C0a.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//tbmParameters_C0b.dat
[12:03:24.122] <TB1> INFO: readMaskFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//defaultMaskFile.dat
[12:03:24.122] <TB1> INFO: readTrimFile: /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//trimParameters35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//trimParameters35_C15.dat
[12:03:24.197] <TB1> INFO: clk: 4
[12:03:24.197] <TB1> INFO: ctr: 4
[12:03:24.197] <TB1> INFO: sda: 19
[12:03:24.197] <TB1> INFO: tin: 9
[12:03:24.197] <TB1> INFO: level: 15
[12:03:24.197] <TB1> INFO: triggerdelay: 0
[12:03:24.197] <TB1> QUIET: Instanciating API for pxar prod-12
[12:03:24.197] <TB1> INFO: Log level: INFO
[12:03:24.211] <TB1> INFO: Found DTB DTB_WWXTQT
[12:03:24.219] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[12:03:24.222] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[12:03:24.224] <TB1> INFO: RPC call hashes of host and DTB match: 398089610
[12:03:25.775] <TB1> INFO: DUT info:
[12:03:25.775] <TB1> INFO: The DUT currently contains the following objects:
[12:03:25.775] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[12:03:25.775] <TB1> INFO: TBM Core alpha (0): 7 registers set
[12:03:25.775] <TB1> INFO: TBM Core beta (1): 7 registers set
[12:03:25.775] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:03:25.775] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:25.775] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:26.176] <TB1> INFO: enter 'restricted' command line mode
[12:03:26.176] <TB1> INFO: enter test to run
[12:03:26.176] <TB1> INFO: test: PixelAlive no parameter change
[12:03:26.176] <TB1> INFO: running: pixelalive
[12:03:26.181] <TB1> INFO: ######################################################################
[12:03:26.181] <TB1> INFO: PixTestAlive::doTest()
[12:03:26.181] <TB1> INFO: ######################################################################
[12:03:26.182] <TB1> INFO: ----------------------------------------------------------------------
[12:03:26.182] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:03:26.182] <TB1> INFO: ----------------------------------------------------------------------
[12:03:26.521] <TB1> INFO: Expecting 208000 events.
[12:03:38.627] <TB1> INFO: 208000 events read in total (11388ms).
[12:03:38.629] <TB1> INFO: Test took 12445ms.
[12:03:38.638] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:03:38.899] <TB1> INFO: PixTestAlive::aliveTest() done
[12:03:38.899] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:03:38.901] <TB1> INFO: ----------------------------------------------------------------------
[12:03:38.901] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:03:38.901] <TB1> INFO: ----------------------------------------------------------------------
[12:03:39.244] <TB1> INFO: Expecting 208000 events.
[12:03:47.650] <TB1> INFO: 208000 events read in total (7690ms).
[12:03:47.650] <TB1> INFO: Test took 8747ms.
[12:03:47.650] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:03:47.651] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[12:03:47.952] <TB1> INFO: PixTestAlive::maskTest() done
[12:03:47.952] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:03:47.954] <TB1> INFO: ----------------------------------------------------------------------
[12:03:47.954] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:03:47.954] <TB1> INFO: ----------------------------------------------------------------------
[12:03:48.267] <TB1> INFO: Expecting 208000 events.
[12:03:59.714] <TB1> INFO: 208000 events read in total (10731ms).
[12:03:59.715] <TB1> INFO: Test took 11760ms.
[12:03:59.724] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:03:59.956] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[12:03:59.956] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:03:59.956] <TB1> INFO: PixTestAlive::doTest() done, duration: 33 seconds
[12:03:59.987] <TB1> INFO: enter test to run
[12:03:59.987] <TB1> INFO: test: delay setting parameters: ->2<-
[12:03:59.987] <TB1> INFO: delay test by 2 seconds...
[12:04:01.988] <TB1> INFO: enter test to run
[12:04:01.988] <TB1> INFO: test: HighRate no parameter change
[12:04:01.988] <TB1> INFO: running: highrate
[12:04:01.988] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2145_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//phCalibrationFitErr35_C15.dat
[12:04:02.172] <TB1> INFO: ----------------------------------------------------------------------
[12:04:02.172] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[12:04:02.172] <TB1> INFO: ----------------------------------------------------------------------
[12:04:02.779] <TB1> INFO: Expecting 208000 events.
[12:04:40.431] <TB1> INFO: 190800 events read in total (37125ms).
[12:04:43.483] <TB1> INFO: 208000 events read in total (40177ms).
[12:04:43.502] <TB1> INFO: Test took 41326ms.
[12:04:44.775] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:04:45.386] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:04:45.386] <TB1> INFO: number of red-efficiency pixels: 2787 2215 1705 3687 3867 4113 3979 4140 4105 3899 4113 3771 3674 1706 1879 2228
[12:04:45.386] <TB1> INFO: number of X-ray hits detected: 543515 532464 487273 825936 884289 1074565 959520 1072082 1066126 897064 1059002 844251 784911 469929 504188 524910
[12:04:45.386] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[12:04:45.386] <TB1> INFO: number of Vcal hits detected: 202266 204253 202839 194539 190873 179404 186476 180152 181331 190182 181346 192385 195644 202629 205231 204146
[12:04:45.386] <TB1> INFO: Vcal hit fiducial efficiency (%): 97.5 98.4 98.0 94.3 92.6 87.6 90.9 87.6 88.2 92.4 88.4 93.4 94.8 97.9 98.8 98.4
[12:04:45.386] <TB1> INFO: Vcal hit overall efficiency (%): 97.2 98.2 97.5 93.5 91.8 86.3 89.7 86.6 87.2 91.4 87.2 92.5 94.1 97.4 98.7 98.1
[12:04:45.386] <TB1> INFO: X-ray hit rate [MHz/cm2]: 159.3 156.1 142.8 242.1 259.2 315.0 281.2 314.2 312.5 262.9 310.4 247.5 230.1 137.7 147.8 153.9
[12:04:45.386] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[12:04:45.416] <TB1> INFO: PixTest:: pg_setup set to default.
[12:04:45.428] <TB1> INFO: enter test to run
[12:04:45.428] <TB1> INFO: test: no parameter change
[12:04:45.664] <TB1> QUIET: Connection to board 147 closed.
[12:04:45.743] <TB1> INFO: pXar: this is the end, my friend