[11:58:07.791] <TB3> INFO: *** Welcome to pxar ***
[11:58:07.791] <TB3> INFO: *** Today: 2016/01/12
[11:58:07.853] <TB3> INFO: *** Version: b2d3
[11:58:07.853] <TB3> INFO: readRocDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//000_PixelAlive_p17//dacParameters35_C15.dat
[11:58:07.854] <TB3> INFO: readTbmDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//000_PixelAlive_p17//tbmParameters_C0b.dat
[11:58:07.854] <TB3> INFO: readMaskFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//000_PixelAlive_p17//defaultMaskFile.dat
[11:58:07.854] <TB3> INFO: readTrimFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//000_PixelAlive_p17//trimParameters35_C15.dat
[11:58:07.923] <TB3> INFO: clk: 4
[11:58:07.923] <TB3> INFO: ctr: 4
[11:58:07.923] <TB3> INFO: sda: 19
[11:58:07.923] <TB3> INFO: tin: 9
[11:58:07.923] <TB3> INFO: level: 15
[11:58:07.923] <TB3> INFO: triggerdelay: 0
[11:58:07.923] <TB3> QUIET: Instanciating API for pxar prod-12
[11:58:07.923] <TB3> INFO: Log level: INFO
[11:58:07.937] <TB3> INFO: Found DTB DTB_WWV6Z5
[11:58:07.950] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[11:58:07.953] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[11:58:07.955] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[11:58:09.508] <TB3> INFO: DUT info:
[11:58:09.508] <TB3> INFO: The DUT currently contains the following objects:
[11:58:09.508] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[11:58:09.508] <TB3> INFO: TBM Core alpha (0): 7 registers set
[11:58:09.508] <TB3> INFO: TBM Core beta (1): 7 registers set
[11:58:09.508] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:58:09.508] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.508] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.508] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.508] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.508] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.508] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.508] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.508] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.508] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.508] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.508] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.508] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.508] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.508] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.508] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.509] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:09.910] <TB3> INFO: enter 'restricted' command line mode
[11:58:09.910] <TB3> INFO: enter test to run
[11:58:09.910] <TB3> INFO: test: PixelAlive no parameter change
[11:58:09.910] <TB3> INFO: running: pixelalive
[11:58:09.914] <TB3> INFO: ######################################################################
[11:58:09.914] <TB3> INFO: PixTestAlive::doTest()
[11:58:09.914] <TB3> INFO: ######################################################################
[11:58:09.915] <TB3> INFO: ----------------------------------------------------------------------
[11:58:09.915] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:58:09.915] <TB3> INFO: ----------------------------------------------------------------------
[11:58:10.217] <TB3> INFO: Expecting 41600 events.
[11:58:14.490] <TB3> INFO: 41600 events read in total (3554ms).
[11:58:14.570] <TB3> INFO: Test took 4653ms.
[11:58:14.576] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:58:14.822] <TB3> INFO: PixTestAlive::aliveTest() done
[11:58:14.822] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0
[11:58:14.824] <TB3> INFO: ----------------------------------------------------------------------
[11:58:14.824] <TB3> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:58:14.824] <TB3> INFO: ----------------------------------------------------------------------
[11:58:15.121] <TB3> INFO: Expecting 41600 events.
[11:58:18.281] <TB3> INFO: 41600 events read in total (2444ms).
[11:58:18.281] <TB3> INFO: Test took 3456ms.
[11:58:18.281] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:58:18.281] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:58:18.590] <TB3> INFO: PixTestAlive::maskTest() done
[11:58:18.590] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:58:18.592] <TB3> INFO: ----------------------------------------------------------------------
[11:58:18.592] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:58:18.592] <TB3> INFO: ----------------------------------------------------------------------
[11:58:18.889] <TB3> INFO: Expecting 41600 events.
[11:58:23.073] <TB3> INFO: 41600 events read in total (3468ms).
[11:58:23.073] <TB3> INFO: Test took 4480ms.
[11:58:23.079] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:58:23.367] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[11:58:23.367] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:58:23.368] <TB3> INFO: PixTestAlive::doTest() done, duration: 13 seconds
[11:58:23.398] <TB3> INFO: enter test to run
[11:58:23.398] <TB3> INFO: test: no parameter change
[11:58:23.560] <TB3> QUIET: Connection to board 121 closed.
[11:58:23.640] <TB3> INFO: pXar: this is the end, my friend

[12:03:40.111] <TB3> INFO: *** Welcome to pxar ***
[12:03:40.111] <TB3> INFO: *** Today: 2016/01/12
[12:03:40.171] <TB3> INFO: *** Version: b2d3
[12:03:40.171] <TB3> INFO: readRocDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//dacParameters35_C15.dat
[12:03:40.172] <TB3> INFO: readTbmDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[12:03:40.172] <TB3> INFO: readMaskFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//defaultMaskFile.dat
[12:03:40.172] <TB3> INFO: readTrimFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C15.dat
[12:03:40.256] <TB3> INFO: clk: 4
[12:03:40.256] <TB3> INFO: ctr: 4
[12:03:40.256] <TB3> INFO: sda: 19
[12:03:40.256] <TB3> INFO: tin: 9
[12:03:40.256] <TB3> INFO: level: 15
[12:03:40.256] <TB3> INFO: triggerdelay: 0
[12:03:40.256] <TB3> QUIET: Instanciating API for pxar prod-12
[12:03:40.256] <TB3> INFO: Log level: INFO
[12:03:40.269] <TB3> INFO: Found DTB DTB_WWV6Z5
[12:03:40.282] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[12:03:40.285] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[12:03:40.287] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[12:03:41.823] <TB3> INFO: DUT info:
[12:03:41.823] <TB3> INFO: The DUT currently contains the following objects:
[12:03:41.823] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[12:03:41.823] <TB3> INFO: TBM Core alpha (0): 7 registers set
[12:03:41.823] <TB3> INFO: TBM Core beta (1): 7 registers set
[12:03:41.823] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:03:41.823] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.823] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.823] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.823] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.823] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.823] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.823] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.823] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.823] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.823] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.823] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.824] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.824] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.824] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.824] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:41.824] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:42.224] <TB3> INFO: enter 'restricted' command line mode
[12:03:42.224] <TB3> INFO: enter test to run
[12:03:42.224] <TB3> INFO: test: delay setting parameters: ->5<-
[12:03:42.224] <TB3> INFO: delay test by 5 seconds...
[12:03:47.224] <TB3> INFO: enter test to run
[12:03:47.224] <TB3> INFO: test: highrate no parameter change
[12:03:47.224] <TB3> INFO: running: highrate
[12:03:47.225] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[12:03:47.384] <TB3> INFO: ----------------------------------------------------------------------
[12:03:47.384] <TB3> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[12:03:47.384] <TB3> INFO: ----------------------------------------------------------------------
[12:03:47.384] <TB3> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[12:03:47.384] <TB3> INFO: edge/corner pixel THR is adjusted
[12:03:47.384] <TB3> INFO: PixTestHighRate::trimHotPixels: step 0...
[12:03:48.343] <TB3> INFO: Collecting data for 1 seconds...
[12:03:49.344] <TB3> INFO: Done with hot pixel readout
[12:03:55.498] <TB3> INFO: PixTest:: pg_setup set to default.
[12:03:55.499] <TB3> INFO: 2 hot pixels found in step 0
[12:03:56.460] <TB3> INFO: Collecting data for 1 seconds...
[12:03:57.460] <TB3> INFO: Done with hot pixel readout
[12:04:03.473] <TB3> INFO: PixTest:: pg_setup set to default.
[12:04:03.474] <TB3> INFO: 2 hot pixels found in step 1
[12:04:04.436] <TB3> INFO: Collecting data for 1 seconds...
[12:04:05.436] <TB3> INFO: Done with hot pixel readout
[12:04:11.502] <TB3> INFO: PixTest:: pg_setup set to default.
[12:04:11.502] <TB3> INFO: 3 hot pixels found in step 2
[12:04:12.462] <TB3> INFO: Collecting data for 1 seconds...
[12:04:13.463] <TB3> INFO: Done with hot pixel readout
[12:04:19.333] <TB3> INFO: PixTest:: pg_setup set to default.
[12:04:19.334] <TB3> INFO: 0 hot pixels found in step 3
[12:04:19.341] <TB3> INFO: 0 hot pixels could not be trimmed and have been masked.
[12:04:19.369] <TB3> INFO: PixTest::trimHotPixels() done
[12:04:19.369] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C0.dat
[12:04:19.375] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C1.dat
[12:04:19.381] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C2.dat
[12:04:19.387] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C3.dat
[12:04:19.394] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C4.dat
[12:04:19.399] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C5.dat
[12:04:19.406] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C6.dat
[12:04:19.412] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C7.dat
[12:04:19.417] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C8.dat
[12:04:19.423] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C9.dat
[12:04:19.430] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C10.dat
[12:04:19.436] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C11.dat
[12:04:19.442] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C12.dat
[12:04:19.448] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C13.dat
[12:04:19.454] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C14.dat
[12:04:19.461] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//trimParameters35_C15.dat
[12:04:19.467] <TB3> INFO: write masked pixels into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//002_RetrimHotPixels_150//defaultMaskFile.dat
[12:04:19.498] <TB3> INFO: enter test to run
[12:04:19.498] <TB3> INFO: test: no parameter change
[12:04:19.639] <TB3> QUIET: Connection to board 121 closed.
[12:04:19.719] <TB3> INFO: pXar: this is the end, my friend

[12:04:56.833] <TB3> INFO: *** Welcome to pxar ***
[12:04:56.833] <TB3> INFO: *** Today: 2016/01/12
[12:04:56.896] <TB3> INFO: *** Version: b2d3
[12:04:56.896] <TB3> INFO: readRocDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//dacParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//dacParameters35_C15.dat
[12:04:56.897] <TB3> INFO: readTbmDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//tbmParameters_C0a.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//tbmParameters_C0b.dat
[12:04:56.897] <TB3> INFO: readMaskFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//defaultMaskFile.dat
[12:04:56.897] <TB3> INFO: readTrimFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C15.dat
[12:04:56.989] <TB3> INFO: clk: 4
[12:04:56.989] <TB3> INFO: ctr: 4
[12:04:56.989] <TB3> INFO: sda: 19
[12:04:56.989] <TB3> INFO: tin: 9
[12:04:56.989] <TB3> INFO: level: 15
[12:04:56.989] <TB3> INFO: triggerdelay: 0
[12:04:56.990] <TB3> QUIET: Instanciating API for pxar prod-12
[12:04:56.990] <TB3> INFO: Log level: INFO
[12:04:57.004] <TB3> INFO: Found DTB DTB_WWV6Z5
[12:04:57.017] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[12:04:57.020] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[12:04:57.022] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[12:04:58.538] <TB3> INFO: DUT info:
[12:04:58.538] <TB3> INFO: The DUT currently contains the following objects:
[12:04:58.538] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[12:04:58.538] <TB3> INFO: TBM Core alpha (0): 7 registers set
[12:04:58.538] <TB3> INFO: TBM Core beta (1): 7 registers set
[12:04:58.538] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:04:58.538] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.538] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.538] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.538] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.538] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.538] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.538] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.538] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.538] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.539] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.539] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.539] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.539] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.539] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.539] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.539] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:04:58.939] <TB3> INFO: enter 'restricted' command line mode
[12:04:58.939] <TB3> INFO: enter test to run
[12:04:58.939] <TB3> INFO: test: delay setting parameters: ->5<-
[12:04:58.939] <TB3> INFO: delay test by 5 seconds...
[12:05:03.939] <TB3> INFO: enter test to run
[12:05:03.939] <TB3> INFO: test: highrate no parameter change
[12:05:03.939] <TB3> INFO: running: highrate
[12:05:03.940] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//phCalibrationFitErr35_C15.dat
[12:05:04.092] <TB3> INFO: ----------------------------------------------------------------------
[12:05:04.092] <TB3> INFO: PixTest::trimHotPixels() running for 5 seconds with 100 kHz trigger rate
[12:05:04.092] <TB3> INFO: ----------------------------------------------------------------------
[12:05:04.092] <TB3> INFO: THR = 10, corresponding to ~ 5.33333 MHz/cm2
[12:05:04.092] <TB3> INFO: edge/corner pixel THR is adjusted
[12:05:04.092] <TB3> INFO: PixTestHighRate::trimHotPixels: step 0...
[12:05:05.051] <TB3> INFO: Collecting data for 5 seconds...
[12:05:10.054] <TB3> INFO: Done with hot pixel readout
[12:05:19.013] <TB3> INFO: PixTest:: pg_setup set to default.
[12:05:19.014] <TB3> INFO: 2 hot pixels found in step 0
[12:05:20.055] <TB3> INFO: Collecting data for 5 seconds...
[12:05:25.059] <TB3> INFO: Done with hot pixel readout
[12:05:34.150] <TB3> INFO: PixTest:: pg_setup set to default.
[12:05:34.151] <TB3> INFO: 1 hot pixels found in step 1
[12:05:35.190] <TB3> INFO: Collecting data for 5 seconds...
[12:05:40.193] <TB3> INFO: Done with hot pixel readout
[12:05:49.025] <TB3> INFO: PixTest:: pg_setup set to default.
[12:05:49.026] <TB3> INFO: 0 hot pixels found in step 2
[12:05:49.028] <TB3> INFO: 0 hot pixels could not be trimmed and have been masked.
[12:05:49.112] <TB3> INFO: PixTest::trimHotPixels() done
[12:05:49.112] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C0.dat
[12:05:49.119] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C1.dat
[12:05:49.125] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C2.dat
[12:05:49.131] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C3.dat
[12:05:49.137] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C4.dat
[12:05:49.142] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C5.dat
[12:05:49.148] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C6.dat
[12:05:49.154] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C7.dat
[12:05:49.160] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C8.dat
[12:05:49.167] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C9.dat
[12:05:49.173] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C10.dat
[12:05:49.179] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C11.dat
[12:05:49.185] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C12.dat
[12:05:49.191] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C13.dat
[12:05:49.197] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C14.dat
[12:05:49.203] <TB3> INFO: write trim parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//trimParameters35_C15.dat
[12:05:49.209] <TB3> INFO: write masked pixels into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//003_RetrimHotPixelsNoRate_p17//defaultMaskFile.dat
[12:05:49.238] <TB3> INFO: enter test to run
[12:05:49.238] <TB3> INFO: test: no parameter change
[12:05:49.395] <TB3> QUIET: Connection to board 121 closed.
[12:05:49.474] <TB3> INFO: pXar: this is the end, my friend

[12:06:24.966] <TB3> INFO: *** Welcome to pxar ***
[12:06:24.966] <TB3> INFO: *** Today: 2016/01/12
[12:06:25.025] <TB3> INFO: *** Version: b2d3
[12:06:25.026] <TB3> INFO: readRocDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//004_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//004_HRData_50//dacParameters35_C15.dat
[12:06:25.026] <TB3> INFO: readTbmDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//004_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//004_HRData_50//tbmParameters_C0b.dat
[12:06:25.026] <TB3> INFO: readMaskFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//004_HRData_50//defaultMaskFile.dat
[12:06:25.026] <TB3> INFO: readTrimFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//004_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//004_HRData_50//trimParameters35_C15.dat
[12:06:25.113] <TB3> INFO: clk: 4
[12:06:25.113] <TB3> INFO: ctr: 4
[12:06:25.113] <TB3> INFO: sda: 19
[12:06:25.113] <TB3> INFO: tin: 9
[12:06:25.113] <TB3> INFO: level: 15
[12:06:25.114] <TB3> INFO: triggerdelay: 0
[12:06:25.114] <TB3> QUIET: Instanciating API for pxar prod-12
[12:06:25.114] <TB3> INFO: Log level: INFO
[12:06:25.127] <TB3> INFO: Found DTB DTB_WWV6Z5
[12:06:25.140] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[12:06:25.143] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[12:06:25.145] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[12:06:26.668] <TB3> INFO: DUT info:
[12:06:26.668] <TB3> INFO: The DUT currently contains the following objects:
[12:06:26.668] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[12:06:26.668] <TB3> INFO: TBM Core alpha (0): 7 registers set
[12:06:26.668] <TB3> INFO: TBM Core beta (1): 7 registers set
[12:06:26.668] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:06:26.668] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:26.668] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:06:27.069] <TB3> INFO: enter 'restricted' command line mode
[12:06:27.069] <TB3> INFO: enter test to run
[12:06:27.069] <TB3> INFO: test: delay setting parameters: ->5<-
[12:06:27.069] <TB3> INFO: delay test by 5 seconds...
[12:06:32.069] <TB3> INFO: enter test to run
[12:06:32.069] <TB3> INFO: test: Xray no parameter change
[12:06:32.069] <TB3> INFO: running: xray
[12:06:32.070] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//004_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//004_HRData_50//phCalibrationFitErr35_C15.dat
[12:06:32.207] <TB3> INFO: ######################################################################
[12:06:32.207] <TB3> INFO: PixTestXray::doTest()
[12:06:32.207] <TB3> INFO: ######################################################################
[12:06:32.207] <TB3> INFO: ----------------------------------------------------------------------
[12:06:32.207] <TB3> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[12:06:32.207] <TB3> INFO: ----------------------------------------------------------------------
[12:06:33.173] <TB3> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[12:06:39.956] <TB3> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[12:07:06.708] <TB3> INFO: Resuming triggers.
[12:07:13.497] <TB3> INFO: run duration 13 seconds, buffer almost full (81%), pausing triggers.
[12:07:39.726] <TB3> INFO: Resuming triggers.
[12:07:46.516] <TB3> INFO: run duration 20 seconds, buffer almost full (81%), pausing triggers.
[12:08:12.545] <TB3> INFO: Resuming triggers.
[12:08:19.335] <TB3> INFO: run duration 27 seconds, buffer almost full (81%), pausing triggers.
[12:08:47.371] <TB3> INFO: Resuming triggers.
[12:08:54.159] <TB3> INFO: run duration 33 seconds, buffer almost full (81%), pausing triggers.
[12:09:20.947] <TB3> INFO: Resuming triggers.
[12:09:27.739] <TB3> INFO: run duration 40 seconds, buffer almost full (81%), pausing triggers.
[12:09:55.079] <TB3> INFO: Resuming triggers.
[12:10:01.867] <TB3> INFO: run duration 47 seconds, buffer almost full (81%), pausing triggers.
[12:10:28.445] <TB3> INFO: Resuming triggers.
[12:10:35.233] <TB3> INFO: run duration 54 seconds, buffer almost full (81%), pausing triggers.
[12:11:01.380] <TB3> INFO: Resuming triggers.
[12:11:08.163] <TB3> INFO: run duration 61 seconds, buffer almost full (81%), pausing triggers.
[12:11:35.788] <TB3> INFO: Resuming triggers.
[12:11:42.579] <TB3> INFO: run duration 67 seconds, buffer almost full (81%), pausing triggers.
[12:12:08.329] <TB3> INFO: Resuming triggers.
[12:12:15.117] <TB3> INFO: run duration 74 seconds, buffer almost full (81%), pausing triggers.
[12:12:41.876] <TB3> INFO: Resuming triggers.
[12:12:48.661] <TB3> INFO: run duration 81 seconds, buffer almost full (81%), pausing triggers.
[12:13:15.646] <TB3> INFO: Resuming triggers.
[12:13:22.431] <TB3> INFO: run duration 88 seconds, buffer almost full (81%), pausing triggers.
[12:13:49.309] <TB3> INFO: Resuming triggers.
[12:13:56.091] <TB3> INFO: run duration 94 seconds, buffer almost full (81%), pausing triggers.
[12:14:22.739] <TB3> INFO: Resuming triggers.
[12:14:27.799] <TB3> INFO: data taking finished, elapsed time: 100 seconds.
[12:14:48.138] <TB3> INFO: PixTest:: pg_setup set to default.
[12:14:48.139] <TB3> INFO: PixTestXray::doPhRun() done
[12:14:48.139] <TB3> INFO: PixTestXray::doTest() done
[12:14:48.319] <TB3> INFO: enter test to run
[12:14:48.319] <TB3> INFO: test: no parameter change
[12:14:48.515] <TB3> QUIET: Connection to board 121 closed.
[12:14:48.595] <TB3> INFO: pXar: this is the end, my friend

[12:16:41.808] <TB3> INFO: *** Welcome to pxar ***
[12:16:41.808] <TB3> INFO: *** Today: 2016/01/12
[12:16:41.865] <TB3> INFO: *** Version: b2d3
[12:16:41.865] <TB3> INFO: readRocDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//005_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//005_HRData_150//dacParameters35_C15.dat
[12:16:41.866] <TB3> INFO: readTbmDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//005_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//005_HRData_150//tbmParameters_C0b.dat
[12:16:41.866] <TB3> INFO: readMaskFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//005_HRData_150//defaultMaskFile.dat
[12:16:41.866] <TB3> INFO: readTrimFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//005_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//005_HRData_150//trimParameters35_C15.dat
[12:16:41.947] <TB3> INFO: clk: 4
[12:16:41.947] <TB3> INFO: ctr: 4
[12:16:41.947] <TB3> INFO: sda: 19
[12:16:41.947] <TB3> INFO: tin: 9
[12:16:41.947] <TB3> INFO: level: 15
[12:16:41.947] <TB3> INFO: triggerdelay: 0
[12:16:41.947] <TB3> QUIET: Instanciating API for pxar prod-12
[12:16:41.947] <TB3> INFO: Log level: INFO
[12:16:41.959] <TB3> INFO: Found DTB DTB_WWV6Z5
[12:16:41.972] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[12:16:41.975] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[12:16:41.977] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[12:16:43.492] <TB3> INFO: DUT info:
[12:16:43.492] <TB3> INFO: The DUT currently contains the following objects:
[12:16:43.492] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[12:16:43.492] <TB3> INFO: TBM Core alpha (0): 7 registers set
[12:16:43.492] <TB3> INFO: TBM Core beta (1): 7 registers set
[12:16:43.492] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:16:43.492] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.492] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:16:43.893] <TB3> INFO: enter 'restricted' command line mode
[12:16:43.893] <TB3> INFO: enter test to run
[12:16:43.893] <TB3> INFO: test: delay setting parameters: ->5<-
[12:16:43.893] <TB3> INFO: delay test by 5 seconds...
[12:16:48.893] <TB3> INFO: enter test to run
[12:16:48.893] <TB3> INFO: test: Xray no parameter change
[12:16:48.893] <TB3> INFO: running: xray
[12:16:48.894] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//005_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//005_HRData_150//phCalibrationFitErr35_C15.dat
[12:16:49.057] <TB3> INFO: ######################################################################
[12:16:49.057] <TB3> INFO: PixTestXray::doTest()
[12:16:49.057] <TB3> INFO: ######################################################################
[12:16:49.057] <TB3> INFO: ----------------------------------------------------------------------
[12:16:49.057] <TB3> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[12:16:49.057] <TB3> INFO: ----------------------------------------------------------------------
[12:16:50.024] <TB3> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[12:16:53.773] <TB3> INFO: run duration 3 seconds, buffer almost full (81%), pausing triggers.
[12:17:20.971] <TB3> INFO: Resuming triggers.
[12:17:24.731] <TB3> INFO: run duration 7 seconds, buffer almost full (81%), pausing triggers.
[12:17:51.828] <TB3> INFO: Resuming triggers.
[12:17:55.584] <TB3> INFO: run duration 11 seconds, buffer almost full (81%), pausing triggers.
[12:18:23.130] <TB3> INFO: Resuming triggers.
[12:18:26.885] <TB3> INFO: run duration 15 seconds, buffer almost full (81%), pausing triggers.
[12:18:55.576] <TB3> INFO: Resuming triggers.
[12:18:59.332] <TB3> INFO: run duration 18 seconds, buffer almost full (81%), pausing triggers.
[12:19:28.907] <TB3> INFO: Resuming triggers.
[12:19:32.663] <TB3> INFO: run duration 22 seconds, buffer almost full (81%), pausing triggers.
[12:20:00.539] <TB3> INFO: Resuming triggers.
[12:20:04.290] <TB3> INFO: run duration 26 seconds, buffer almost full (81%), pausing triggers.
[12:20:32.714] <TB3> INFO: Resuming triggers.
[12:20:36.467] <TB3> INFO: run duration 30 seconds, buffer almost full (81%), pausing triggers.
[12:21:05.262] <TB3> INFO: Resuming triggers.
[12:21:09.011] <TB3> INFO: run duration 33 seconds, buffer almost full (81%), pausing triggers.
[12:21:37.680] <TB3> INFO: Resuming triggers.
[12:21:41.430] <TB3> INFO: run duration 37 seconds, buffer almost full (81%), pausing triggers.
[12:22:09.340] <TB3> INFO: Resuming triggers.
[12:22:13.087] <TB3> INFO: run duration 41 seconds, buffer almost full (81%), pausing triggers.
[12:22:39.263] <TB3> INFO: Resuming triggers.
[12:22:43.011] <TB3> INFO: run duration 44 seconds, buffer almost full (81%), pausing triggers.
[12:23:09.492] <TB3> INFO: Resuming triggers.
[12:23:13.238] <TB3> INFO: run duration 48 seconds, buffer almost full (81%), pausing triggers.
[12:23:41.916] <TB3> INFO: Resuming triggers.
[12:23:45.666] <TB3> INFO: run duration 52 seconds, buffer almost full (81%), pausing triggers.
[12:24:13.924] <TB3> INFO: Resuming triggers.
[12:24:17.674] <TB3> INFO: run duration 56 seconds, buffer almost full (81%), pausing triggers.
[12:24:45.194] <TB3> INFO: Resuming triggers.
[12:24:48.942] <TB3> INFO: run duration 59 seconds, buffer almost full (81%), pausing triggers.
[12:25:16.138] <TB3> INFO: Resuming triggers.
[12:25:19.886] <TB3> INFO: run duration 63 seconds, buffer almost full (81%), pausing triggers.
[12:25:47.824] <TB3> INFO: Resuming triggers.
[12:25:51.571] <TB3> INFO: run duration 67 seconds, buffer almost full (81%), pausing triggers.
[12:26:20.328] <TB3> INFO: Resuming triggers.
[12:26:24.072] <TB3> INFO: run duration 71 seconds, buffer almost full (81%), pausing triggers.
[12:26:52.230] <TB3> INFO: Resuming triggers.
[12:26:55.973] <TB3> INFO: run duration 74 seconds, buffer almost full (81%), pausing triggers.
[12:27:24.239] <TB3> INFO: Resuming triggers.
[12:27:27.979] <TB3> INFO: run duration 78 seconds, buffer almost full (81%), pausing triggers.
[12:27:56.296] <TB3> INFO: Resuming triggers.
[12:28:00.039] <TB3> INFO: run duration 82 seconds, buffer almost full (81%), pausing triggers.
[12:28:27.774] <TB3> INFO: Resuming triggers.
[12:28:31.516] <TB3> INFO: run duration 86 seconds, buffer almost full (81%), pausing triggers.
[12:28:59.050] <TB3> INFO: Resuming triggers.
[12:29:02.792] <TB3> INFO: run duration 89 seconds, buffer almost full (81%), pausing triggers.
[12:29:30.928] <TB3> INFO: Resuming triggers.
[12:29:34.670] <TB3> INFO: run duration 93 seconds, buffer almost full (81%), pausing triggers.
[12:30:03.095] <TB3> INFO: Resuming triggers.
[12:30:06.836] <TB3> INFO: run duration 97 seconds, buffer almost full (81%), pausing triggers.
[12:30:34.316] <TB3> INFO: Resuming triggers.
[12:30:36.938] <TB3> INFO: data taking finished, elapsed time: 100 seconds.
[12:30:56.988] <TB3> INFO: PixTest:: pg_setup set to default.
[12:30:56.989] <TB3> INFO: PixTestXray::doPhRun() done
[12:30:56.989] <TB3> INFO: PixTestXray::doTest() done
[12:30:57.177] <TB3> INFO: enter test to run
[12:30:57.177] <TB3> INFO: test: no parameter change
[12:30:57.356] <TB3> QUIET: Connection to board 121 closed.
[12:30:57.445] <TB3> INFO: pXar: this is the end, my friend

[12:34:09.749] <TB3> INFO: *** Welcome to pxar ***
[12:34:09.749] <TB3> INFO: *** Today: 2016/01/12
[12:34:09.808] <TB3> INFO: *** Version: b2d3
[12:34:09.808] <TB3> INFO: readRocDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//006_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//006_HRSCurves_100//dacParameters35_C15.dat
[12:34:09.809] <TB3> INFO: readTbmDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//006_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//006_HRSCurves_100//tbmParameters_C0b.dat
[12:34:09.809] <TB3> INFO: readMaskFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//006_HRSCurves_100//defaultMaskFile.dat
[12:34:09.809] <TB3> INFO: readTrimFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//006_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//006_HRSCurves_100//trimParameters35_C15.dat
[12:34:09.898] <TB3> INFO: clk: 4
[12:34:09.899] <TB3> INFO: ctr: 4
[12:34:09.899] <TB3> INFO: sda: 19
[12:34:09.899] <TB3> INFO: tin: 9
[12:34:09.899] <TB3> INFO: level: 15
[12:34:09.899] <TB3> INFO: triggerdelay: 0
[12:34:09.899] <TB3> QUIET: Instanciating API for pxar prod-12
[12:34:09.899] <TB3> INFO: Log level: INFO
[12:34:09.912] <TB3> INFO: Found DTB DTB_WWV6Z5
[12:34:09.924] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[12:34:09.927] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[12:34:09.930] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[12:34:11.447] <TB3> INFO: DUT info:
[12:34:11.447] <TB3> INFO: The DUT currently contains the following objects:
[12:34:11.447] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[12:34:11.447] <TB3> INFO: TBM Core alpha (0): 7 registers set
[12:34:11.447] <TB3> INFO: TBM Core beta (1): 7 registers set
[12:34:11.447] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:34:11.448] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.448] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:34:11.848] <TB3> INFO: enter 'restricted' command line mode
[12:34:11.848] <TB3> INFO: enter test to run
[12:34:11.849] <TB3> INFO: test: Highrate no parameter change
[12:34:11.849] <TB3> INFO: running: highrate
[12:34:11.849] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//006_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//006_HRSCurves_100//phCalibrationFitErr35_C15.dat
[12:34:12.014] <TB3> INFO: ----------------------------------------------------------------------
[12:34:12.014] <TB3> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[12:34:12.014] <TB3> INFO: ----------------------------------------------------------------------
[12:34:12.020] <TB3> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 15 .. 75 (20/-1) hits flags = 896 (plus default)
[12:34:12.033] <TB3> INFO: dacScan step from 15 .. 34
[12:34:12.033] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[12:34:12.033] <TB3> INFO: run 1 of 1
[12:34:12.652] <TB3> INFO: Expecting 4160000 events.
[12:34:44.054] <TB3> INFO: 466200 events read in total (30873ms).
[12:35:15.138] <TB3> INFO: 934050 events read in total (61957ms).
[12:35:47.558] <TB3> INFO: 1402250 events read in total (94377ms).
[12:36:18.290] <TB3> INFO: 1870750 events read in total (125109ms).
[12:36:49.468] <TB3> INFO: 2338900 events read in total (156287ms).
[12:37:20.531] <TB3> INFO: 2807050 events read in total (187350ms).
[12:37:51.618] <TB3> INFO: 3274850 events read in total (218437ms).
[12:38:22.032] <TB3> INFO: 3741850 events read in total (248851ms).
[12:38:49.475] <TB3> INFO: 4160000 events read in total (276294ms).
[12:38:49.730] <TB3> INFO: Test took 277697ms.
[12:38:52.144] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:38:57.172] <TB3> INFO: dacScan step from 35 .. 54
[12:38:57.172] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[12:38:57.172] <TB3> INFO: run 1 of 1
[12:38:57.783] <TB3> INFO: Expecting 4160000 events.
[12:39:28.757] <TB3> INFO: 385350 events read in total (30440ms).
[12:39:58.437] <TB3> INFO: 771500 events read in total (60120ms).
[12:40:27.688] <TB3> INFO: 1156950 events read in total (89371ms).
[12:40:56.787] <TB3> INFO: 1541250 events read in total (118470ms).
[12:41:26.203] <TB3> INFO: 1924300 events read in total (147886ms).
[12:41:55.168] <TB3> INFO: 2305300 events read in total (176851ms).
[12:42:24.159] <TB3> INFO: 2683850 events read in total (205842ms).
[12:42:53.789] <TB3> INFO: 3059500 events read in total (235472ms).
[12:43:23.114] <TB3> INFO: 3432400 events read in total (264797ms).
[12:43:52.240] <TB3> INFO: 3803400 events read in total (293923ms).
[12:44:20.562] <TB3> INFO: 4160000 events read in total (322245ms).
[12:44:20.804] <TB3> INFO: Test took 323631ms.
[12:44:23.035] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:44:27.945] <TB3> INFO: dacScan step from 55 .. 74
[12:44:27.945] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[12:44:27.945] <TB3> INFO: run 1 of 1
[12:44:28.552] <TB3> INFO: Expecting 4160000 events.
[12:44:56.744] <TB3> INFO: 344500 events read in total (27657ms).
[12:45:26.129] <TB3> INFO: 689500 events read in total (57042ms).
[12:45:54.324] <TB3> INFO: 1034600 events read in total (85237ms).
[12:46:23.760] <TB3> INFO: 1379800 events read in total (114673ms).
[12:46:51.875] <TB3> INFO: 1724850 events read in total (142788ms).
[12:47:20.657] <TB3> INFO: 2069850 events read in total (171570ms).
[12:47:49.301] <TB3> INFO: 2414900 events read in total (200214ms).
[12:48:17.516] <TB3> INFO: 2759850 events read in total (228429ms).
[12:48:46.546] <TB3> INFO: 3104650 events read in total (257459ms).
[12:49:14.985] <TB3> INFO: 3449800 events read in total (285898ms).
[12:49:43.804] <TB3> INFO: 3794850 events read in total (314717ms).
[12:50:12.388] <TB3> INFO: 4139600 events read in total (343301ms).
[12:50:14.538] <TB3> INFO: 4160000 events read in total (345451ms).
[12:50:14.711] <TB3> INFO: Test took 346766ms.
[12:50:16.290] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:50:21.462] <TB3> INFO: dacScan step from 75 .. 75
[12:50:21.462] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[12:50:21.462] <TB3> INFO: run 1 of 1
[12:50:22.083] <TB3> INFO: Expecting 208000 events.
[12:50:40.576] <TB3> INFO: 208000 events read in total (17966ms).
[12:50:40.583] <TB3> INFO: Test took 19121ms.
[12:50:40.660] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:50:40.955] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:42.870] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:44.022] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:45.102] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:46.271] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:47.426] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:48.550] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:49.664] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:50.976] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:52.128] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:53.298] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:54.570] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:55.744] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:56.901] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:58.051] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:50:59.160] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[12:51:00.311] <TB3> INFO: PixTest:: pg_setup set to default.
[12:51:00.313] <TB3> INFO: vcal mean: 37.64 38.01 37.30 40.12 40.33 41.91 41.16 42.27 41.89 41.91 41.73 41.49 40.56 38.35 38.66 38.41
[12:51:00.313] <TB3> INFO: vcal RMS: 1.00 0.96 0.85 1.26 1.14 1.32 1.41 1.37 1.35 1.37 1.58 1.58 1.31 1.13 1.10 1.04
[12:51:00.313] <TB3> INFO: number of X-ray hits detected: 153125 166185 143909 262605 289962 330004 328867 342327 356358 358496 397261 346408 297591 174179 195391 179238
[12:51:00.313] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[12:51:00.313] <TB3> INFO: X-ray hit rate [MHz/cm2]: 44.9 48.7 42.2 77.0 85.0 96.7 96.4 100.3 104.5 105.1 116.4 101.5 87.2 51.1 57.3 52.5
[12:51:00.313] <TB3> INFO: PixTestHighRate::doXNoiseMaps() done
[12:51:00.526] <TB3> INFO: enter test to run
[12:51:00.541] <TB3> INFO: test: no parameter change
[12:51:00.779] <TB3> QUIET: Connection to board 121 closed.
[12:51:00.872] <TB3> INFO: pXar: this is the end, my friend

[13:15:21.048] <TB3> INFO: *** Welcome to pxar ***
[13:15:21.048] <TB3> INFO: *** Today: 2016/01/12
[13:15:21.101] <TB3> INFO: *** Version: b2d3
[13:15:21.102] <TB3> INFO: readRocDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[13:15:21.102] <TB3> INFO: readTbmDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[13:15:21.102] <TB3> INFO: readMaskFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[13:15:21.102] <TB3> INFO: readTrimFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[13:15:21.176] <TB3> INFO: clk: 4
[13:15:21.176] <TB3> INFO: ctr: 4
[13:15:21.176] <TB3> INFO: sda: 19
[13:15:21.176] <TB3> INFO: tin: 9
[13:15:21.176] <TB3> INFO: level: 15
[13:15:21.176] <TB3> INFO: triggerdelay: 0
[13:15:21.176] <TB3> QUIET: Instanciating API for pxar prod-12
[13:15:21.176] <TB3> INFO: Log level: INFO
[13:15:21.188] <TB3> INFO: Found DTB DTB_WWV6Z5
[13:15:21.201] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[13:15:21.204] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[13:15:21.207] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[13:15:22.725] <TB3> INFO: DUT info:
[13:15:22.725] <TB3> INFO: The DUT currently contains the following objects:
[13:15:22.725] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[13:15:22.725] <TB3> INFO: TBM Core alpha (0): 7 registers set
[13:15:22.725] <TB3> INFO: TBM Core beta (1): 7 registers set
[13:15:22.725] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:15:22.725] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:22.725] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:15:23.126] <TB3> INFO: enter 'restricted' command line mode
[13:15:23.126] <TB3> INFO: enter test to run
[13:15:23.126] <TB3> INFO: test: HighRate no parameter change
[13:15:23.126] <TB3> INFO: running: highrate
[13:15:23.126] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[13:15:23.283] <TB3> INFO: ----------------------------------------------------------------------
[13:15:23.283] <TB3> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[13:15:23.283] <TB3> INFO: ----------------------------------------------------------------------
[13:15:23.420] <TB3> INFO: Expecting 768 events.
[13:15:24.649] <TB3> INFO: 768 events read in total (511ms).
[13:15:24.744] <TB3> INFO: Test took 1456ms.
[13:15:25.359] <TB3> INFO: Expecting 41600 events.
[13:15:29.165] <TB3> INFO: 41600 events read in total (3279ms).
[13:15:29.167] <TB3> INFO: Test took 4418ms.
[13:15:29.241] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:15:29.880] <TB3> INFO: Expecting 41600 events.
[13:15:33.767] <TB3> INFO: 41600 events read in total (3360ms).
[13:15:33.769] <TB3> INFO: Test took 4501ms.
[13:15:33.848] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:15:34.504] <TB3> INFO: Expecting 41600 events.
[13:15:38.325] <TB3> INFO: 41600 events read in total (3295ms).
[13:15:38.326] <TB3> INFO: Test took 4446ms.
[13:15:38.399] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:15:39.038] <TB3> INFO: Expecting 41600 events.
[13:15:42.912] <TB3> INFO: 41600 events read in total (3347ms).
[13:15:42.914] <TB3> INFO: Test took 4487ms.
[13:15:42.989] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:15:43.644] <TB3> INFO: Expecting 41600 events.
[13:15:47.343] <TB3> INFO: 41600 events read in total (3172ms).
[13:15:47.345] <TB3> INFO: Test took 4323ms.
[13:15:47.418] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:15:48.057] <TB3> INFO: Expecting 41600 events.
[13:15:51.820] <TB3> INFO: 41600 events read in total (3236ms).
[13:15:51.821] <TB3> INFO: Test took 4376ms.
[13:15:51.896] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:15:52.533] <TB3> INFO: Expecting 41600 events.
[13:15:56.415] <TB3> INFO: 41600 events read in total (3355ms).
[13:15:56.416] <TB3> INFO: Test took 4495ms.
[13:15:56.489] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:15:57.127] <TB3> INFO: Expecting 41600 events.
[13:16:01.056] <TB3> INFO: 41600 events read in total (3402ms).
[13:16:01.058] <TB3> INFO: Test took 4542ms.
[13:16:01.129] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:16:01.767] <TB3> INFO: Expecting 41600 events.
[13:16:05.592] <TB3> INFO: 41600 events read in total (3298ms).
[13:16:05.593] <TB3> INFO: Test took 4437ms.
[13:16:05.669] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:16:06.321] <TB3> INFO: Expecting 41600 events.
[13:16:10.322] <TB3> INFO: 41600 events read in total (3474ms).
[13:16:10.324] <TB3> INFO: Test took 4623ms.
[13:16:10.403] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:16:11.047] <TB3> INFO: Expecting 41600 events.
[13:16:14.925] <TB3> INFO: 41600 events read in total (3351ms).
[13:16:14.927] <TB3> INFO: Test took 4492ms.
[13:16:15.000] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:16:15.653] <TB3> INFO: Expecting 41600 events.
[13:16:19.553] <TB3> INFO: 41600 events read in total (3373ms).
[13:16:19.555] <TB3> INFO: Test took 4526ms.
[13:16:19.630] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:16:20.273] <TB3> INFO: Expecting 41600 events.
[13:16:24.010] <TB3> INFO: 41600 events read in total (3210ms).
[13:16:24.011] <TB3> INFO: Test took 4350ms.
[13:16:24.078] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:16:24.716] <TB3> INFO: Expecting 41600 events.
[13:16:28.599] <TB3> INFO: 41600 events read in total (3356ms).
[13:16:28.601] <TB3> INFO: Test took 4497ms.
[13:16:28.676] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:16:29.316] <TB3> INFO: Expecting 41600 events.
[13:16:33.082] <TB3> INFO: 41600 events read in total (3239ms).
[13:16:33.084] <TB3> INFO: Test took 4380ms.
[13:16:33.152] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:16:33.793] <TB3> INFO: Expecting 41600 events.
[13:16:37.606] <TB3> INFO: 41600 events read in total (3286ms).
[13:16:37.607] <TB3> INFO: Test took 4428ms.
[13:16:37.675] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:16:38.313] <TB3> INFO: Expecting 41600 events.
[13:16:42.112] <TB3> INFO: 41600 events read in total (3272ms).
[13:16:42.113] <TB3> INFO: Test took 4412ms.
[13:16:42.187] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:16:42.833] <TB3> INFO: Expecting 41600 events.
[13:16:46.569] <TB3> INFO: 41600 events read in total (3209ms).
[13:16:46.571] <TB3> INFO: Test took 4351ms.
[13:16:46.636] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:16:47.273] <TB3> INFO: Expecting 41600 events.
[13:16:50.992] <TB3> INFO: 41600 events read in total (3191ms).
[13:16:50.994] <TB3> INFO: Test took 4332ms.
[13:16:51.060] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:16:51.697] <TB3> INFO: Expecting 41600 events.
[13:16:55.270] <TB3> INFO: 41600 events read in total (3047ms).
[13:16:55.271] <TB3> INFO: Test took 4186ms.
[13:16:55.335] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:16:55.631] <TB3> INFO: enter test to run
[13:16:55.631] <TB3> INFO: test: Pretest no parameter change
[13:16:55.631] <TB3> INFO: running: pretest
[13:16:55.631] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[13:16:55.631] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[13:16:55.631] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[13:16:55.631] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[13:16:55.631] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[13:16:55.631] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[13:16:55.631] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[13:16:55.632] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[13:16:55.632] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[13:16:55.632] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[13:16:55.632] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[13:16:55.632] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[13:16:55.632] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[13:16:55.632] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[13:16:55.632] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[13:16:55.632] <TB3> INFO: write dac parameters into /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[13:16:55.632] <TB3> INFO: enter test to run
[13:16:55.632] <TB3> INFO: test: no parameter change
[13:16:55.777] <TB3> QUIET: Connection to board 121 closed.
[13:16:55.857] <TB3> INFO: pXar: this is the end, my friend

[13:17:30.739] <TB3> INFO: *** Welcome to pxar ***
[13:17:30.739] <TB3> INFO: *** Today: 2016/01/12
[13:17:30.800] <TB3> INFO: *** Version: b2d3
[13:17:30.800] <TB3> INFO: readRocDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//012_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//012_HREfficiency_50//dacParameters35_C15.dat
[13:17:30.800] <TB3> INFO: readTbmDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//012_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//012_HREfficiency_50//tbmParameters_C0b.dat
[13:17:30.800] <TB3> INFO: readMaskFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//012_HREfficiency_50//defaultMaskFile.dat
[13:17:30.800] <TB3> INFO: readTrimFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//012_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//012_HREfficiency_50//trimParameters35_C15.dat
[13:17:30.880] <TB3> INFO: clk: 4
[13:17:30.880] <TB3> INFO: ctr: 4
[13:17:30.880] <TB3> INFO: sda: 19
[13:17:30.880] <TB3> INFO: tin: 9
[13:17:30.880] <TB3> INFO: level: 15
[13:17:30.880] <TB3> INFO: triggerdelay: 0
[13:17:30.880] <TB3> QUIET: Instanciating API for pxar prod-12
[13:17:30.880] <TB3> INFO: Log level: INFO
[13:17:30.893] <TB3> INFO: Found DTB DTB_WWV6Z5
[13:17:30.906] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[13:17:30.909] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[13:17:30.911] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[13:17:32.451] <TB3> INFO: DUT info:
[13:17:32.452] <TB3> INFO: The DUT currently contains the following objects:
[13:17:32.452] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[13:17:32.452] <TB3> INFO: TBM Core alpha (0): 7 registers set
[13:17:32.452] <TB3> INFO: TBM Core beta (1): 7 registers set
[13:17:32.452] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:17:32.452] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.452] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:32.852] <TB3> INFO: enter 'restricted' command line mode
[13:17:32.852] <TB3> INFO: enter test to run
[13:17:32.853] <TB3> INFO: test: PixelAlive no parameter change
[13:17:32.853] <TB3> INFO: running: pixelalive
[13:17:32.857] <TB3> INFO: ######################################################################
[13:17:32.857] <TB3> INFO: PixTestAlive::doTest()
[13:17:32.857] <TB3> INFO: ######################################################################
[13:17:32.858] <TB3> INFO: ----------------------------------------------------------------------
[13:17:32.858] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:17:32.858] <TB3> INFO: ----------------------------------------------------------------------
[13:17:33.168] <TB3> INFO: Expecting 208000 events.
[13:17:44.284] <TB3> INFO: 208000 events read in total (10398ms).
[13:17:44.303] <TB3> INFO: Test took 11443ms.
[13:17:44.315] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:17:44.564] <TB3> INFO: PixTestAlive::aliveTest() done
[13:17:44.564] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:17:44.565] <TB3> INFO: ----------------------------------------------------------------------
[13:17:44.565] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:17:44.565] <TB3> INFO: ----------------------------------------------------------------------
[13:17:44.873] <TB3> INFO: Expecting 208000 events.
[13:17:52.148] <TB3> INFO: 208000 events read in total (6560ms).
[13:17:52.149] <TB3> INFO: Test took 7582ms.
[13:17:52.149] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:17:52.149] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[13:17:52.459] <TB3> INFO: PixTestAlive::maskTest() done
[13:17:52.459] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:17:52.461] <TB3> INFO: ----------------------------------------------------------------------
[13:17:52.461] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:17:52.461] <TB3> INFO: ----------------------------------------------------------------------
[13:17:52.794] <TB3> INFO: Expecting 208000 events.
[13:18:04.063] <TB3> INFO: 208000 events read in total (10553ms).
[13:18:04.064] <TB3> INFO: Test took 11602ms.
[13:18:04.074] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:18:04.302] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[13:18:04.302] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:18:04.302] <TB3> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[13:18:04.332] <TB3> INFO: enter test to run
[13:18:04.332] <TB3> INFO: test: delay setting parameters: ->2<-
[13:18:04.332] <TB3> INFO: delay test by 2 seconds...
[13:18:06.332] <TB3> INFO: enter test to run
[13:18:06.332] <TB3> INFO: test: HighRate no parameter change
[13:18:06.332] <TB3> INFO: running: highrate
[13:18:06.332] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//012_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//012_HREfficiency_50//phCalibrationFitErr35_C15.dat
[13:18:06.467] <TB3> INFO: ----------------------------------------------------------------------
[13:18:06.467] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[13:18:06.467] <TB3> INFO: ----------------------------------------------------------------------
[13:18:07.069] <TB3> INFO: Expecting 208000 events.
[13:18:21.039] <TB3> INFO: 208000 events read in total (13443ms).
[13:18:21.044] <TB3> INFO: Test took 14574ms.
[13:18:21.281] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:18:21.555] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:18:21.555] <TB3> INFO: number of red-efficiency pixels: 91 109 94 175 226 221 189 243 298 242 379 267 227 137 123 92
[13:18:21.555] <TB3> INFO: number of X-ray hits detected: 76058 81997 70314 131122 144847 167780 165453 172424 178590 179857 202443 172682 150236 85233 97279 89391
[13:18:21.555] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[13:18:21.555] <TB3> INFO: number of Vcal hits detected: 207909 207888 207903 207820 207758 207768 207802 207746 207687 207741 207592 207725 207763 207858 207875 207907
[13:18:21.555] <TB3> INFO: Vcal hit fiducial efficiency (%): 100.0 99.9 100.0 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.8 99.9 99.9 99.9 99.9 100.0
[13:18:21.555] <TB3> INFO: Vcal hit overall efficiency (%): 100.0 99.9 100.0 99.9 99.9 99.9 99.9 99.9 99.8 99.9 99.8 99.9 99.9 99.9 99.9 100.0
[13:18:21.555] <TB3> INFO: X-ray hit rate [MHz/cm2]: 22.3 24.0 20.6 38.4 42.5 49.2 48.5 50.5 52.3 52.7 59.3 50.6 44.0 25.0 28.5 26.2
[13:18:21.555] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[13:18:21.581] <TB3> INFO: PixTest:: pg_setup set to default.
[13:18:21.589] <TB3> INFO: enter test to run
[13:18:21.589] <TB3> INFO: test: no parameter change
[13:18:21.822] <TB3> QUIET: Connection to board 121 closed.
[13:18:21.902] <TB3> INFO: pXar: this is the end, my friend

[13:18:56.380] <TB3> INFO: *** Welcome to pxar ***
[13:18:56.380] <TB3> INFO: *** Today: 2016/01/12
[13:18:56.440] <TB3> INFO: *** Version: b2d3
[13:18:56.440] <TB3> INFO: readRocDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//013_HREfficiency_75//dacParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//013_HREfficiency_75//dacParameters35_C15.dat
[13:18:56.441] <TB3> INFO: readTbmDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//013_HREfficiency_75//tbmParameters_C0a.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//013_HREfficiency_75//tbmParameters_C0b.dat
[13:18:56.441] <TB3> INFO: readMaskFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//013_HREfficiency_75//defaultMaskFile.dat
[13:18:56.442] <TB3> INFO: readTrimFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//013_HREfficiency_75//trimParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//013_HREfficiency_75//trimParameters35_C15.dat
[13:18:56.528] <TB3> INFO: clk: 4
[13:18:56.528] <TB3> INFO: ctr: 4
[13:18:56.528] <TB3> INFO: sda: 19
[13:18:56.528] <TB3> INFO: tin: 9
[13:18:56.528] <TB3> INFO: level: 15
[13:18:56.528] <TB3> INFO: triggerdelay: 0
[13:18:56.528] <TB3> QUIET: Instanciating API for pxar prod-12
[13:18:56.528] <TB3> INFO: Log level: INFO
[13:18:56.542] <TB3> INFO: Found DTB DTB_WWV6Z5
[13:18:56.554] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[13:18:56.558] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[13:18:56.564] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[13:18:58.114] <TB3> INFO: DUT info:
[13:18:58.114] <TB3> INFO: The DUT currently contains the following objects:
[13:18:58.114] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[13:18:58.114] <TB3> INFO: TBM Core alpha (0): 7 registers set
[13:18:58.114] <TB3> INFO: TBM Core beta (1): 7 registers set
[13:18:58.114] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:18:58.114] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.114] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.115] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.115] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.115] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.115] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.115] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.115] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.115] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.115] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.115] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.115] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.115] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.115] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.115] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.115] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:18:58.515] <TB3> INFO: enter 'restricted' command line mode
[13:18:58.515] <TB3> INFO: enter test to run
[13:18:58.515] <TB3> INFO: test: PixelAlive no parameter change
[13:18:58.515] <TB3> INFO: running: pixelalive
[13:18:58.519] <TB3> INFO: ######################################################################
[13:18:58.519] <TB3> INFO: PixTestAlive::doTest()
[13:18:58.519] <TB3> INFO: ######################################################################
[13:18:58.521] <TB3> INFO: ----------------------------------------------------------------------
[13:18:58.521] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:18:58.521] <TB3> INFO: ----------------------------------------------------------------------
[13:18:58.837] <TB3> INFO: Expecting 208000 events.
[13:19:09.840] <TB3> INFO: 208000 events read in total (10285ms).
[13:19:09.863] <TB3> INFO: Test took 11341ms.
[13:19:09.869] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:19:10.121] <TB3> INFO: PixTestAlive::aliveTest() done
[13:19:10.121] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:19:10.123] <TB3> INFO: ----------------------------------------------------------------------
[13:19:10.123] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:19:10.123] <TB3> INFO: ----------------------------------------------------------------------
[13:19:10.449] <TB3> INFO: Expecting 208000 events.
[13:19:17.484] <TB3> INFO: 208000 events read in total (6319ms).
[13:19:17.485] <TB3> INFO: Test took 7361ms.
[13:19:17.485] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:19:17.485] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[13:19:17.790] <TB3> INFO: PixTestAlive::maskTest() done
[13:19:17.790] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:19:17.792] <TB3> INFO: ----------------------------------------------------------------------
[13:19:17.792] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:19:17.792] <TB3> INFO: ----------------------------------------------------------------------
[13:19:18.111] <TB3> INFO: Expecting 208000 events.
[13:19:28.858] <TB3> INFO: 208000 events read in total (10033ms).
[13:19:28.859] <TB3> INFO: Test took 11066ms.
[13:19:28.869] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:19:29.092] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[13:19:29.092] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:19:29.092] <TB3> INFO: PixTestAlive::doTest() done, duration: 30 seconds
[13:19:29.127] <TB3> INFO: enter test to run
[13:19:29.127] <TB3> INFO: test: delay setting parameters: ->2<-
[13:19:29.127] <TB3> INFO: delay test by 2 seconds...
[13:19:31.127] <TB3> INFO: enter test to run
[13:19:31.127] <TB3> INFO: test: HighRate no parameter change
[13:19:31.127] <TB3> INFO: running: highrate
[13:19:31.128] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//013_HREfficiency_75//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//013_HREfficiency_75//phCalibrationFitErr35_C15.dat
[13:19:31.298] <TB3> INFO: ----------------------------------------------------------------------
[13:19:31.298] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[13:19:31.298] <TB3> INFO: ----------------------------------------------------------------------
[13:19:31.925] <TB3> INFO: Expecting 208000 events.
[13:19:47.370] <TB3> INFO: 208000 events read in total (14918ms).
[13:19:47.375] <TB3> INFO: Test took 16074ms.
[13:19:47.720] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:19:48.027] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:19:48.027] <TB3> INFO: number of red-efficiency pixels: 151 179 142 316 435 453 442 437 563 495 744 467 442 255 220 150
[13:19:48.027] <TB3> INFO: number of X-ray hits detected: 112003 120776 104003 192833 212781 242844 241459 252356 261425 261995 292970 251856 218469 125883 143168 129885
[13:19:48.027] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[13:19:48.027] <TB3> INFO: number of Vcal hits detected: 207849 207816 207852 207665 207519 207505 207532 207534 207380 207457 207163 207493 207530 207724 207769 207842
[13:19:48.027] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.9 99.8 99.8 99.8 99.8 99.7 99.8 99.6 99.8 99.8 99.9 99.9 99.9
[13:19:48.027] <TB3> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.8 99.8 99.8 99.8 99.8 99.7 99.7 99.6 99.8 99.8 99.9 99.9 99.9
[13:19:48.027] <TB3> INFO: X-ray hit rate [MHz/cm2]: 32.8 35.4 30.5 56.5 62.4 71.2 70.8 74.0 76.6 76.8 85.9 73.8 64.0 36.9 42.0 38.1
[13:19:48.027] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[13:19:48.052] <TB3> INFO: PixTest:: pg_setup set to default.
[13:19:48.061] <TB3> INFO: enter test to run
[13:19:48.061] <TB3> INFO: test: no parameter change
[13:19:48.275] <TB3> QUIET: Connection to board 121 closed.
[13:19:48.355] <TB3> INFO: pXar: this is the end, my friend

[13:20:23.377] <TB3> INFO: *** Welcome to pxar ***
[13:20:23.377] <TB3> INFO: *** Today: 2016/01/12
[13:20:23.436] <TB3> INFO: *** Version: b2d3
[13:20:23.436] <TB3> INFO: readRocDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//014_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//014_HREfficiency_100//dacParameters35_C15.dat
[13:20:23.437] <TB3> INFO: readTbmDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//014_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//014_HREfficiency_100//tbmParameters_C0b.dat
[13:20:23.437] <TB3> INFO: readMaskFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//014_HREfficiency_100//defaultMaskFile.dat
[13:20:23.437] <TB3> INFO: readTrimFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//014_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//014_HREfficiency_100//trimParameters35_C15.dat
[13:20:23.508] <TB3> INFO: clk: 4
[13:20:23.508] <TB3> INFO: ctr: 4
[13:20:23.508] <TB3> INFO: sda: 19
[13:20:23.508] <TB3> INFO: tin: 9
[13:20:23.508] <TB3> INFO: level: 15
[13:20:23.508] <TB3> INFO: triggerdelay: 0
[13:20:23.508] <TB3> QUIET: Instanciating API for pxar prod-12
[13:20:23.508] <TB3> INFO: Log level: INFO
[13:20:23.521] <TB3> INFO: Found DTB DTB_WWV6Z5
[13:20:23.534] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[13:20:23.537] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[13:20:23.539] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[13:20:25.079] <TB3> INFO: DUT info:
[13:20:25.079] <TB3> INFO: The DUT currently contains the following objects:
[13:20:25.079] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[13:20:25.079] <TB3> INFO: TBM Core alpha (0): 7 registers set
[13:20:25.079] <TB3> INFO: TBM Core beta (1): 7 registers set
[13:20:25.079] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:20:25.079] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.079] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:25.480] <TB3> INFO: enter 'restricted' command line mode
[13:20:25.480] <TB3> INFO: enter test to run
[13:20:25.480] <TB3> INFO: test: PixelAlive no parameter change
[13:20:25.480] <TB3> INFO: running: pixelalive
[13:20:25.484] <TB3> INFO: ######################################################################
[13:20:25.484] <TB3> INFO: PixTestAlive::doTest()
[13:20:25.484] <TB3> INFO: ######################################################################
[13:20:25.486] <TB3> INFO: ----------------------------------------------------------------------
[13:20:25.486] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:20:25.486] <TB3> INFO: ----------------------------------------------------------------------
[13:20:25.823] <TB3> INFO: Expecting 208000 events.
[13:20:37.063] <TB3> INFO: 208000 events read in total (10522ms).
[13:20:37.087] <TB3> INFO: Test took 11600ms.
[13:20:37.093] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:20:37.340] <TB3> INFO: PixTestAlive::aliveTest() done
[13:20:37.340] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:20:37.341] <TB3> INFO: ----------------------------------------------------------------------
[13:20:37.341] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:20:37.341] <TB3> INFO: ----------------------------------------------------------------------
[13:20:37.644] <TB3> INFO: Expecting 208000 events.
[13:20:44.720] <TB3> INFO: 208000 events read in total (6360ms).
[13:20:44.720] <TB3> INFO: Test took 7377ms.
[13:20:44.720] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:20:44.721] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[13:20:45.022] <TB3> INFO: PixTestAlive::maskTest() done
[13:20:45.022] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:20:45.023] <TB3> INFO: ----------------------------------------------------------------------
[13:20:45.023] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:20:45.023] <TB3> INFO: ----------------------------------------------------------------------
[13:20:45.326] <TB3> INFO: Expecting 208000 events.
[13:20:56.762] <TB3> INFO: 208000 events read in total (10721ms).
[13:20:56.763] <TB3> INFO: Test took 11739ms.
[13:20:56.769] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:20:57.000] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[13:20:57.000] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:20:57.000] <TB3> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[13:20:57.032] <TB3> INFO: enter test to run
[13:20:57.032] <TB3> INFO: test: delay setting parameters: ->2<-
[13:20:57.032] <TB3> INFO: delay test by 2 seconds...
[13:20:59.032] <TB3> INFO: enter test to run
[13:20:59.032] <TB3> INFO: test: HighRate no parameter change
[13:20:59.032] <TB3> INFO: running: highrate
[13:20:59.032] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//014_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//014_HREfficiency_100//phCalibrationFitErr35_C15.dat
[13:20:59.170] <TB3> INFO: ----------------------------------------------------------------------
[13:20:59.170] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[13:20:59.170] <TB3> INFO: ----------------------------------------------------------------------
[13:20:59.771] <TB3> INFO: Expecting 208000 events.
[13:21:17.435] <TB3> INFO: 208000 events read in total (17137ms).
[13:21:17.443] <TB3> INFO: Test took 18270ms.
[13:21:17.898] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:21:18.243] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:21:18.243] <TB3> INFO: number of red-efficiency pixels: 263 292 236 573 901 802 771 913 1041 1047 1423 884 839 430 366 284
[13:21:18.243] <TB3> INFO: number of X-ray hits detected: 154590 166865 144341 264771 292093 332977 328695 345379 357285 358763 400243 344871 300730 174753 197429 178097
[13:21:18.243] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[13:21:18.243] <TB3> INFO: number of Vcal hits detected: 207729 207701 207749 207365 206950 207056 207082 206947 206737 206704 206119 206938 207014 207505 207615 207705
[13:21:18.243] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.7 99.5 99.6 99.6 99.5 99.4 99.5 99.2 99.5 99.6 99.8 99.8 99.9
[13:21:18.243] <TB3> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.7 99.5 99.5 99.6 99.5 99.4 99.4 99.1 99.5 99.5 99.8 99.8 99.9
[13:21:18.243] <TB3> INFO: X-ray hit rate [MHz/cm2]: 45.3 48.9 42.3 77.6 85.6 97.6 96.3 101.2 104.7 105.2 117.3 101.1 88.1 51.2 57.9 52.2
[13:21:18.243] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[13:21:18.268] <TB3> INFO: PixTest:: pg_setup set to default.
[13:21:18.278] <TB3> INFO: enter test to run
[13:21:18.278] <TB3> INFO: test: no parameter change
[13:21:18.451] <TB3> QUIET: Connection to board 121 closed.
[13:21:18.532] <TB3> INFO: pXar: this is the end, my friend

[13:21:54.354] <TB3> INFO: *** Welcome to pxar ***
[13:21:54.354] <TB3> INFO: *** Today: 2016/01/12
[13:21:54.412] <TB3> INFO: *** Version: b2d3
[13:21:54.412] <TB3> INFO: readRocDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//015_HREfficiency_125//dacParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//015_HREfficiency_125//dacParameters35_C15.dat
[13:21:54.413] <TB3> INFO: readTbmDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//015_HREfficiency_125//tbmParameters_C0a.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//015_HREfficiency_125//tbmParameters_C0b.dat
[13:21:54.413] <TB3> INFO: readMaskFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//015_HREfficiency_125//defaultMaskFile.dat
[13:21:54.413] <TB3> INFO: readTrimFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//015_HREfficiency_125//trimParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//015_HREfficiency_125//trimParameters35_C15.dat
[13:21:54.502] <TB3> INFO: clk: 4
[13:21:54.502] <TB3> INFO: ctr: 4
[13:21:54.502] <TB3> INFO: sda: 19
[13:21:54.502] <TB3> INFO: tin: 9
[13:21:54.502] <TB3> INFO: level: 15
[13:21:54.502] <TB3> INFO: triggerdelay: 0
[13:21:54.502] <TB3> QUIET: Instanciating API for pxar prod-12
[13:21:54.502] <TB3> INFO: Log level: INFO
[13:21:54.514] <TB3> INFO: Found DTB DTB_WWV6Z5
[13:21:54.527] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[13:21:54.530] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[13:21:54.532] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[13:21:56.067] <TB3> INFO: DUT info:
[13:21:56.067] <TB3> INFO: The DUT currently contains the following objects:
[13:21:56.067] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[13:21:56.067] <TB3> INFO: TBM Core alpha (0): 7 registers set
[13:21:56.067] <TB3> INFO: TBM Core beta (1): 7 registers set
[13:21:56.067] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:21:56.067] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.067] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:21:56.468] <TB3> INFO: enter 'restricted' command line mode
[13:21:56.468] <TB3> INFO: enter test to run
[13:21:56.468] <TB3> INFO: test: PixelAlive no parameter change
[13:21:56.468] <TB3> INFO: running: pixelalive
[13:21:56.473] <TB3> INFO: ######################################################################
[13:21:56.473] <TB3> INFO: PixTestAlive::doTest()
[13:21:56.473] <TB3> INFO: ######################################################################
[13:21:56.474] <TB3> INFO: ----------------------------------------------------------------------
[13:21:56.474] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:21:56.474] <TB3> INFO: ----------------------------------------------------------------------
[13:21:56.806] <TB3> INFO: Expecting 208000 events.
[13:22:07.513] <TB3> INFO: 208000 events read in total (9989ms).
[13:22:07.518] <TB3> INFO: Test took 11042ms.
[13:22:07.527] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:22:07.782] <TB3> INFO: PixTestAlive::aliveTest() done
[13:22:07.782] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:22:07.783] <TB3> INFO: ----------------------------------------------------------------------
[13:22:07.783] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:22:07.783] <TB3> INFO: ----------------------------------------------------------------------
[13:22:08.106] <TB3> INFO: Expecting 208000 events.
[13:22:15.173] <TB3> INFO: 208000 events read in total (6351ms).
[13:22:15.173] <TB3> INFO: Test took 7388ms.
[13:22:15.173] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:22:15.174] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[13:22:15.480] <TB3> INFO: PixTestAlive::maskTest() done
[13:22:15.480] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:22:15.481] <TB3> INFO: ----------------------------------------------------------------------
[13:22:15.481] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:22:15.481] <TB3> INFO: ----------------------------------------------------------------------
[13:22:15.785] <TB3> INFO: Expecting 208000 events.
[13:22:26.871] <TB3> INFO: 208000 events read in total (10371ms).
[13:22:26.871] <TB3> INFO: Test took 11389ms.
[13:22:26.877] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:22:27.109] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[13:22:27.109] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:22:27.109] <TB3> INFO: PixTestAlive::doTest() done, duration: 30 seconds
[13:22:27.140] <TB3> INFO: enter test to run
[13:22:27.140] <TB3> INFO: test: delay setting parameters: ->2<-
[13:22:27.140] <TB3> INFO: delay test by 2 seconds...
[13:22:29.140] <TB3> INFO: enter test to run
[13:22:29.140] <TB3> INFO: test: HighRate no parameter change
[13:22:29.140] <TB3> INFO: running: highrate
[13:22:29.140] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//015_HREfficiency_125//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//015_HREfficiency_125//phCalibrationFitErr35_C15.dat
[13:22:29.307] <TB3> INFO: ----------------------------------------------------------------------
[13:22:29.307] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[13:22:29.307] <TB3> INFO: ----------------------------------------------------------------------
[13:22:29.910] <TB3> INFO: Expecting 208000 events.
[13:22:49.035] <TB3> INFO: 208000 events read in total (18598ms).
[13:22:49.047] <TB3> INFO: Test took 19737ms.
[13:22:49.607] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:22:49.985] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:22:49.985] <TB3> INFO: number of red-efficiency pixels: 328 464 372 847 1305 1216 1167 1334 1553 1441 2000 1340 1266 638 601 356
[13:22:49.985] <TB3> INFO: number of X-ray hits detected: 188104 203354 176104 319843 354235 403895 398083 418102 432533 433600 481343 417800 363027 212904 240230 216835
[13:22:49.985] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[13:22:49.985] <TB3> INFO: number of Vcal hits detected: 207652 207504 207590 207022 206261 206412 206451 206352 205940 206007 204782 206187 206377 207188 207343 207630
[13:22:49.985] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.8 99.8 99.8 99.6 99.2 99.3 99.4 99.3 99.1 99.2 98.6 99.2 99.3 99.7 99.7 99.8
[13:22:49.985] <TB3> INFO: Vcal hit overall efficiency (%): 99.8 99.8 99.8 99.5 99.2 99.2 99.3 99.2 99.0 99.0 98.5 99.1 99.2 99.6 99.7 99.8
[13:22:49.985] <TB3> INFO: X-ray hit rate [MHz/cm2]: 55.1 59.6 51.6 93.7 103.8 118.4 116.7 122.5 126.8 127.1 141.1 122.5 106.4 62.4 70.4 63.6
[13:22:49.985] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[13:22:50.010] <TB3> INFO: PixTest:: pg_setup set to default.
[13:22:50.020] <TB3> INFO: enter test to run
[13:22:50.020] <TB3> INFO: test: no parameter change
[13:22:50.227] <TB3> QUIET: Connection to board 121 closed.
[13:22:50.306] <TB3> INFO: pXar: this is the end, my friend

[13:23:26.277] <TB3> INFO: *** Welcome to pxar ***
[13:23:26.277] <TB3> INFO: *** Today: 2016/01/12
[13:23:26.335] <TB3> INFO: *** Version: b2d3
[13:23:26.335] <TB3> INFO: readRocDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//016_HREfficiency_150//dacParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//016_HREfficiency_150//dacParameters35_C15.dat
[13:23:26.335] <TB3> INFO: readTbmDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//016_HREfficiency_150//tbmParameters_C0a.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//016_HREfficiency_150//tbmParameters_C0b.dat
[13:23:26.336] <TB3> INFO: readMaskFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//016_HREfficiency_150//defaultMaskFile.dat
[13:23:26.336] <TB3> INFO: readTrimFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//016_HREfficiency_150//trimParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//016_HREfficiency_150//trimParameters35_C15.dat
[13:23:26.419] <TB3> INFO: clk: 4
[13:23:26.419] <TB3> INFO: ctr: 4
[13:23:26.419] <TB3> INFO: sda: 19
[13:23:26.419] <TB3> INFO: tin: 9
[13:23:26.419] <TB3> INFO: level: 15
[13:23:26.419] <TB3> INFO: triggerdelay: 0
[13:23:26.419] <TB3> QUIET: Instanciating API for pxar prod-12
[13:23:26.419] <TB3> INFO: Log level: INFO
[13:23:26.433] <TB3> INFO: Found DTB DTB_WWV6Z5
[13:23:26.446] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[13:23:26.449] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[13:23:26.451] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[13:23:27.971] <TB3> INFO: DUT info:
[13:23:27.971] <TB3> INFO: The DUT currently contains the following objects:
[13:23:27.971] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[13:23:27.971] <TB3> INFO: TBM Core alpha (0): 7 registers set
[13:23:27.971] <TB3> INFO: TBM Core beta (1): 7 registers set
[13:23:27.971] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:23:27.971] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:27.971] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:23:28.372] <TB3> INFO: enter 'restricted' command line mode
[13:23:28.372] <TB3> INFO: enter test to run
[13:23:28.372] <TB3> INFO: test: PixelAlive no parameter change
[13:23:28.372] <TB3> INFO: running: pixelalive
[13:23:28.376] <TB3> INFO: ######################################################################
[13:23:28.376] <TB3> INFO: PixTestAlive::doTest()
[13:23:28.376] <TB3> INFO: ######################################################################
[13:23:28.377] <TB3> INFO: ----------------------------------------------------------------------
[13:23:28.377] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:23:28.377] <TB3> INFO: ----------------------------------------------------------------------
[13:23:28.682] <TB3> INFO: Expecting 208000 events.
[13:23:39.645] <TB3> INFO: 208000 events read in total (10245ms).
[13:23:39.662] <TB3> INFO: Test took 11284ms.
[13:23:39.670] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:23:39.917] <TB3> INFO: PixTestAlive::aliveTest() done
[13:23:39.917] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:23:39.918] <TB3> INFO: ----------------------------------------------------------------------
[13:23:39.918] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:23:39.918] <TB3> INFO: ----------------------------------------------------------------------
[13:23:40.238] <TB3> INFO: Expecting 208000 events.
[13:23:47.601] <TB3> INFO: 208000 events read in total (6647ms).
[13:23:47.602] <TB3> INFO: Test took 7683ms.
[13:23:47.602] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:23:47.602] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[13:23:47.907] <TB3> INFO: PixTestAlive::maskTest() done
[13:23:47.907] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:23:47.909] <TB3> INFO: ----------------------------------------------------------------------
[13:23:47.909] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:23:47.909] <TB3> INFO: ----------------------------------------------------------------------
[13:23:48.221] <TB3> INFO: Expecting 208000 events.
[13:23:59.627] <TB3> INFO: 208000 events read in total (10690ms).
[13:23:59.628] <TB3> INFO: Test took 11718ms.
[13:23:59.635] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:23:59.865] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[13:23:59.865] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:23:59.865] <TB3> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[13:23:59.903] <TB3> INFO: enter test to run
[13:23:59.903] <TB3> INFO: test: delay setting parameters: ->2<-
[13:23:59.903] <TB3> INFO: delay test by 2 seconds...
[13:24:01.903] <TB3> INFO: enter test to run
[13:24:01.903] <TB3> INFO: test: HighRate no parameter change
[13:24:01.903] <TB3> INFO: running: highrate
[13:24:01.903] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//016_HREfficiency_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//016_HREfficiency_150//phCalibrationFitErr35_C15.dat
[13:24:02.053] <TB3> INFO: ----------------------------------------------------------------------
[13:24:02.053] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[13:24:02.053] <TB3> INFO: ----------------------------------------------------------------------
[13:24:02.677] <TB3> INFO: Expecting 208000 events.
[13:24:24.705] <TB3> INFO: 208000 events read in total (21501ms).
[13:24:24.714] <TB3> INFO: Test took 22657ms.
[13:24:25.380] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:24:25.792] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:24:25.792] <TB3> INFO: number of red-efficiency pixels: 485 592 470 1216 1845 1752 1642 1888 2142 2013 2641 1832 1763 912 817 494
[13:24:25.792] <TB3> INFO: number of X-ray hits detected: 224764 242723 210543 380312 420485 478655 473170 496348 512781 514702 572493 496825 431052 255532 286929 259173
[13:24:25.792] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[13:24:25.792] <TB3> INFO: number of Vcal hits detected: 207479 207363 207427 206421 205192 205414 205487 205320 204574 204697 202695 205074 205407 206695 207058 207467
[13:24:25.792] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.8 99.7 99.8 99.3 98.8 98.9 99.0 98.8 98.5 98.6 97.7 98.8 98.9 99.4 99.6 99.8
[13:24:25.792] <TB3> INFO: Vcal hit overall efficiency (%): 99.7 99.7 99.7 99.2 98.7 98.8 98.8 98.7 98.4 98.4 97.4 98.6 98.8 99.4 99.5 99.7
[13:24:25.792] <TB3> INFO: X-ray hit rate [MHz/cm2]: 65.9 71.1 61.7 111.5 123.2 140.3 138.7 145.5 150.3 150.9 167.8 145.6 126.3 74.9 84.1 76.0
[13:24:25.792] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[13:24:25.817] <TB3> INFO: PixTest:: pg_setup set to default.
[13:24:25.828] <TB3> INFO: enter test to run
[13:24:25.828] <TB3> INFO: test: no parameter change
[13:24:26.007] <TB3> QUIET: Connection to board 121 closed.
[13:24:26.087] <TB3> INFO: pXar: this is the end, my friend

[13:25:02.554] <TB3> INFO: *** Welcome to pxar ***
[13:25:02.554] <TB3> INFO: *** Today: 2016/01/12
[13:25:02.612] <TB3> INFO: *** Version: b2d3
[13:25:02.612] <TB3> INFO: readRocDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//017_HREfficiency_200//dacParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//017_HREfficiency_200//dacParameters35_C15.dat
[13:25:02.613] <TB3> INFO: readTbmDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//017_HREfficiency_200//tbmParameters_C0a.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//017_HREfficiency_200//tbmParameters_C0b.dat
[13:25:02.613] <TB3> INFO: readMaskFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//017_HREfficiency_200//defaultMaskFile.dat
[13:25:02.613] <TB3> INFO: readTrimFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//017_HREfficiency_200//trimParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//017_HREfficiency_200//trimParameters35_C15.dat
[13:25:02.689] <TB3> INFO: clk: 4
[13:25:02.689] <TB3> INFO: ctr: 4
[13:25:02.689] <TB3> INFO: sda: 19
[13:25:02.689] <TB3> INFO: tin: 9
[13:25:02.689] <TB3> INFO: level: 15
[13:25:02.689] <TB3> INFO: triggerdelay: 0
[13:25:02.689] <TB3> QUIET: Instanciating API for pxar prod-12
[13:25:02.689] <TB3> INFO: Log level: INFO
[13:25:02.701] <TB3> INFO: Found DTB DTB_WWV6Z5
[13:25:02.714] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[13:25:02.717] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[13:25:02.720] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[13:25:04.262] <TB3> INFO: DUT info:
[13:25:04.262] <TB3> INFO: The DUT currently contains the following objects:
[13:25:04.262] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[13:25:04.262] <TB3> INFO: TBM Core alpha (0): 7 registers set
[13:25:04.262] <TB3> INFO: TBM Core beta (1): 7 registers set
[13:25:04.262] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:25:04.262] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.262] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:25:04.663] <TB3> INFO: enter 'restricted' command line mode
[13:25:04.663] <TB3> INFO: enter test to run
[13:25:04.663] <TB3> INFO: test: PixelAlive no parameter change
[13:25:04.663] <TB3> INFO: running: pixelalive
[13:25:04.667] <TB3> INFO: ######################################################################
[13:25:04.667] <TB3> INFO: PixTestAlive::doTest()
[13:25:04.667] <TB3> INFO: ######################################################################
[13:25:04.668] <TB3> INFO: ----------------------------------------------------------------------
[13:25:04.668] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:25:04.668] <TB3> INFO: ----------------------------------------------------------------------
[13:25:04.972] <TB3> INFO: Expecting 208000 events.
[13:25:15.994] <TB3> INFO: 208000 events read in total (10304ms).
[13:25:16.003] <TB3> INFO: Test took 11333ms.
[13:25:16.009] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:25:16.265] <TB3> INFO: PixTestAlive::aliveTest() done
[13:25:16.265] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:25:16.266] <TB3> INFO: ----------------------------------------------------------------------
[13:25:16.266] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:25:16.266] <TB3> INFO: ----------------------------------------------------------------------
[13:25:16.569] <TB3> INFO: Expecting 208000 events.
[13:25:23.663] <TB3> INFO: 208000 events read in total (6379ms).
[13:25:23.663] <TB3> INFO: Test took 7396ms.
[13:25:23.663] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:25:23.664] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[13:25:23.966] <TB3> INFO: PixTestAlive::maskTest() done
[13:25:23.966] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:25:23.968] <TB3> INFO: ----------------------------------------------------------------------
[13:25:23.968] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:25:23.968] <TB3> INFO: ----------------------------------------------------------------------
[13:25:24.272] <TB3> INFO: Expecting 208000 events.
[13:25:35.278] <TB3> INFO: 208000 events read in total (10290ms).
[13:25:35.279] <TB3> INFO: Test took 11310ms.
[13:25:35.287] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:25:35.511] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[13:25:35.511] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:25:35.511] <TB3> INFO: PixTestAlive::doTest() done, duration: 30 seconds
[13:25:35.544] <TB3> INFO: enter test to run
[13:25:35.544] <TB3> INFO: test: delay setting parameters: ->2<-
[13:25:35.544] <TB3> INFO: delay test by 2 seconds...
[13:25:37.544] <TB3> INFO: enter test to run
[13:25:37.544] <TB3> INFO: test: HighRate no parameter change
[13:25:37.544] <TB3> INFO: running: highrate
[13:25:37.544] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//017_HREfficiency_200//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//017_HREfficiency_200//phCalibrationFitErr35_C15.dat
[13:25:37.678] <TB3> INFO: ----------------------------------------------------------------------
[13:25:37.678] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[13:25:37.678] <TB3> INFO: ----------------------------------------------------------------------
[13:25:38.276] <TB3> INFO: Expecting 208000 events.
[13:26:04.666] <TB3> INFO: 208000 events read in total (25863ms).
[13:26:04.681] <TB3> INFO: Test took 26999ms.
[13:26:05.528] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:26:06.004] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:26:06.004] <TB3> INFO: number of red-efficiency pixels: 926 1096 803 2208 2996 2885 2784 3067 3371 3199 3716 3045 2844 1375 1597 921
[13:26:06.004] <TB3> INFO: number of X-ray hits detected: 306756 331492 288714 512728 568234 643817 640567 670329 690741 693111 769563 671904 581928 346752 392774 350499
[13:26:06.004] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[13:26:06.004] <TB3> INFO: number of Vcal hits detected: 206923 206644 206793 204310 201359 201772 201925 201569 199703 199732 195543 200902 201645 205170 205880 206911
[13:26:06.004] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.5 99.4 99.5 98.4 97.1 97.4 97.5 97.2 96.3 96.5 94.7 97.0 97.3 98.8 99.0 99.5
[13:26:06.004] <TB3> INFO: Vcal hit overall efficiency (%): 99.5 99.3 99.4 98.2 96.8 97.0 97.1 96.9 96.0 96.0 94.0 96.6 96.9 98.6 99.0 99.5
[13:26:06.004] <TB3> INFO: X-ray hit rate [MHz/cm2]: 89.9 97.2 84.6 150.3 166.6 188.7 187.8 196.5 202.5 203.2 225.6 196.9 170.6 101.6 115.1 102.7
[13:26:06.004] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[13:26:06.031] <TB3> INFO: PixTest:: pg_setup set to default.
[13:26:06.042] <TB3> INFO: enter test to run
[13:26:06.042] <TB3> INFO: test: no parameter change
[13:26:06.216] <TB3> QUIET: Connection to board 121 closed.
[13:26:06.295] <TB3> INFO: pXar: this is the end, my friend

[13:26:42.819] <TB3> INFO: *** Welcome to pxar ***
[13:26:42.819] <TB3> INFO: *** Today: 2016/01/12
[13:26:42.881] <TB3> INFO: *** Version: b2d3
[13:26:42.881] <TB3> INFO: readRocDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//018_HREfficiency_250//dacParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//018_HREfficiency_250//dacParameters35_C15.dat
[13:26:42.882] <TB3> INFO: readTbmDacs: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//018_HREfficiency_250//tbmParameters_C0a.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//018_HREfficiency_250//tbmParameters_C0b.dat
[13:26:42.883] <TB3> INFO: readMaskFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//018_HREfficiency_250//defaultMaskFile.dat
[13:26:42.883] <TB3> INFO: readTrimFile: /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//018_HREfficiency_250//trimParameters35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//018_HREfficiency_250//trimParameters35_C15.dat
[13:26:42.969] <TB3> INFO: clk: 4
[13:26:42.969] <TB3> INFO: ctr: 4
[13:26:42.969] <TB3> INFO: sda: 19
[13:26:42.969] <TB3> INFO: tin: 9
[13:26:42.969] <TB3> INFO: level: 15
[13:26:42.969] <TB3> INFO: triggerdelay: 0
[13:26:42.969] <TB3> QUIET: Instanciating API for pxar prod-12
[13:26:42.969] <TB3> INFO: Log level: INFO
[13:26:42.982] <TB3> INFO: Found DTB DTB_WWV6Z5
[13:26:42.995] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[13:26:42.998] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[13:26:43.001] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[13:26:44.551] <TB3> INFO: DUT info:
[13:26:44.551] <TB3> INFO: The DUT currently contains the following objects:
[13:26:44.551] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[13:26:44.551] <TB3> INFO: TBM Core alpha (0): 7 registers set
[13:26:44.551] <TB3> INFO: TBM Core beta (1): 7 registers set
[13:26:44.551] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:26:44.551] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.551] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.551] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.551] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.551] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.551] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.551] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.551] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.551] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.551] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.551] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.551] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.551] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.551] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.551] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.552] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:26:44.952] <TB3> INFO: enter 'restricted' command line mode
[13:26:44.952] <TB3> INFO: enter test to run
[13:26:44.952] <TB3> INFO: test: PixelAlive no parameter change
[13:26:44.952] <TB3> INFO: running: pixelalive
[13:26:44.956] <TB3> INFO: ######################################################################
[13:26:44.956] <TB3> INFO: PixTestAlive::doTest()
[13:26:44.956] <TB3> INFO: ######################################################################
[13:26:44.958] <TB3> INFO: ----------------------------------------------------------------------
[13:26:44.958] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:26:44.958] <TB3> INFO: ----------------------------------------------------------------------
[13:26:45.267] <TB3> INFO: Expecting 208000 events.
[13:26:56.333] <TB3> INFO: 208000 events read in total (10348ms).
[13:26:56.343] <TB3> INFO: Test took 11384ms.
[13:26:56.350] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:26:56.603] <TB3> INFO: PixTestAlive::aliveTest() done
[13:26:56.603] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:26:56.604] <TB3> INFO: ----------------------------------------------------------------------
[13:26:56.604] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:26:56.604] <TB3> INFO: ----------------------------------------------------------------------
[13:26:56.928] <TB3> INFO: Expecting 208000 events.
[13:27:04.444] <TB3> INFO: 208000 events read in total (6801ms).
[13:27:04.444] <TB3> INFO: Test took 7839ms.
[13:27:04.444] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:27:04.444] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[13:27:04.752] <TB3> INFO: PixTestAlive::maskTest() done
[13:27:04.752] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:27:04.754] <TB3> INFO: ----------------------------------------------------------------------
[13:27:04.754] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:27:04.754] <TB3> INFO: ----------------------------------------------------------------------
[13:27:05.091] <TB3> INFO: Expecting 208000 events.
[13:27:16.009] <TB3> INFO: 208000 events read in total (10203ms).
[13:27:16.010] <TB3> INFO: Test took 11254ms.
[13:27:16.017] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:27:16.238] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[13:27:16.238] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:27:16.238] <TB3> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[13:27:16.269] <TB3> INFO: enter test to run
[13:27:16.270] <TB3> INFO: test: delay setting parameters: ->2<-
[13:27:16.270] <TB3> INFO: delay test by 2 seconds...
[13:27:18.270] <TB3> INFO: enter test to run
[13:27:18.270] <TB3> INFO: test: HighRate no parameter change
[13:27:18.270] <TB3> INFO: running: highrate
[13:27:18.270] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//018_HREfficiency_250//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2142_XrayQualification_2016-01-12_12h57m_1452599828//018_HREfficiency_250//phCalibrationFitErr35_C15.dat
[13:27:18.401] <TB3> INFO: ----------------------------------------------------------------------
[13:27:18.401] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[13:27:18.401] <TB3> INFO: ----------------------------------------------------------------------
[13:27:18.999] <TB3> INFO: Expecting 208000 events.
[13:27:50.357] <TB3> INFO: 208000 events read in total (30832ms).
[13:27:50.376] <TB3> INFO: Test took 31972ms.
[13:27:51.506] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:27:52.070] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:27:52.070] <TB3> INFO: number of red-efficiency pixels: 1387 1719 1161 3020 3688 3663 3564 3852 3963 3824 4080 3706 3582 1822 2368 1464
[13:27:52.070] <TB3> INFO: number of X-ray hits detected: 378390 409258 356114 627988 699782 784211 787149 825672 853215 853819 942063 829761 719317 429410 484670 435224
[13:27:52.070] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[13:27:52.070] <TB3> INFO: number of Vcal hits detected: 206247 205588 205839 200930 195843 196690 196360 195407 192532 192951 185575 194409 196739 202743 204089 206087
[13:27:52.070] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.2 98.9 99.1 97.0 94.7 95.2 95.1 94.4 93.1 93.6 90.2 94.1 95.2 97.8 98.2 99.2
[13:27:52.070] <TB3> INFO: Vcal hit overall efficiency (%): 99.2 98.8 99.0 96.6 94.2 94.6 94.4 93.9 92.6 92.8 89.2 93.5 94.6 97.5 98.1 99.1
[13:27:52.070] <TB3> INFO: X-ray hit rate [MHz/cm2]: 110.9 120.0 104.4 184.1 205.1 229.9 230.7 242.0 250.1 250.3 276.1 243.2 210.8 125.9 142.1 127.6
[13:27:52.070] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[13:27:52.098] <TB3> INFO: PixTest:: pg_setup set to default.
[13:27:52.111] <TB3> INFO: enter test to run
[13:27:52.111] <TB3> INFO: test: no parameter change
[13:27:52.303] <TB3> QUIET: Connection to board 121 closed.
[13:27:52.382] <TB3> INFO: pXar: this is the end, my friend