Test Date: 2016-01-19 10:15
Analysis date: 2016-05-26 08:14
Logfile
commander_PixelAlive.log
[09:17:45.768] <TB2> INFO: *** Welcome to pxar ***
[09:17:45.768] <TB2> INFO: *** Today: 2016/01/19
[09:17:45.834] <TB2> INFO: *** Version: b2d3
[09:17:45.834] <TB2> INFO: readRocDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//000_PixelAlive_p17//dacParameters35_C15.dat
[09:17:45.835] <TB2> INFO: readTbmDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//000_PixelAlive_p17//tbmParameters_C0b.dat
[09:17:45.835] <TB2> INFO: readMaskFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//000_PixelAlive_p17//defaultMaskFile.dat
[09:17:45.835] <TB2> INFO: readTrimFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//000_PixelAlive_p17//trimParameters35_C15.dat
[09:17:45.914] <TB2> INFO: clk: 4
[09:17:45.915] <TB2> INFO: ctr: 4
[09:17:45.915] <TB2> INFO: sda: 19
[09:17:45.915] <TB2> INFO: tin: 9
[09:17:45.915] <TB2> INFO: level: 15
[09:17:45.915] <TB2> INFO: triggerdelay: 0
[09:17:45.915] <TB2> QUIET: Instanciating API for pxar prod-12
[09:17:45.915] <TB2> INFO: Log level: INFO
[09:17:45.929] <TB2> INFO: Found DTB DTB_WXENWR
[09:17:45.937] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[09:17:45.941] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[09:17:45.943] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[09:17:47.483] <TB2> INFO: DUT info:
[09:17:47.483] <TB2> INFO: The DUT currently contains the following objects:
[09:17:47.483] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[09:17:47.483] <TB2> INFO: TBM Core alpha (0): 7 registers set
[09:17:47.483] <TB2> INFO: TBM Core beta (1): 7 registers set
[09:17:47.483] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:17:47.483] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.483] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.483] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.483] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.483] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.483] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.483] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.483] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.483] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.483] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.483] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.483] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.483] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.483] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.483] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.484] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:17:47.884] <TB2> INFO: enter 'restricted' command line mode
[09:17:47.884] <TB2> INFO: enter test to run
[09:17:47.884] <TB2> INFO: test: PixelAlive no parameter change
[09:17:47.884] <TB2> INFO: running: pixelalive
[09:17:47.888] <TB2> INFO: ######################################################################
[09:17:47.888] <TB2> INFO: PixTestAlive::doTest()
[09:17:47.889] <TB2> INFO: ######################################################################
[09:17:47.890] <TB2> INFO: ----------------------------------------------------------------------
[09:17:47.890] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:17:47.890] <TB2> INFO: ----------------------------------------------------------------------
[09:17:48.196] <TB2> INFO: Expecting 41600 events.
[09:17:52.388] <TB2> INFO: 41600 events read in total (3473ms).
[09:17:52.468] <TB2> INFO: Test took 4576ms.
[09:17:52.475] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[09:17:52.741] <TB2> INFO: PixTestAlive::aliveTest() done
[09:17:52.741] <TB2> INFO: number of dead pixels (per ROC): 0 1 2 10 4 1 12 1 0 0 0 1 0 2 0 1
[09:17:52.743] <TB2> INFO: ----------------------------------------------------------------------
[09:17:52.743] <TB2> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:17:52.743] <TB2> INFO: ----------------------------------------------------------------------
[09:17:53.041] <TB2> INFO: Expecting 41600 events.
[09:17:56.164] <TB2> INFO: 41600 events read in total (2407ms).
[09:17:56.165] <TB2> INFO: Test took 3420ms.
[09:17:56.165] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[09:17:56.166] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[09:17:56.493] <TB2> INFO: PixTestAlive::maskTest() done
[09:17:56.493] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:17:56.495] <TB2> INFO: ----------------------------------------------------------------------
[09:17:56.495] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:17:56.495] <TB2> INFO: ----------------------------------------------------------------------
[09:17:56.807] <TB2> INFO: Expecting 41600 events.
[09:18:01.223] <TB2> INFO: 41600 events read in total (3699ms).
[09:18:01.223] <TB2> INFO: Test took 4725ms.
[09:18:01.229] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[09:18:01.535] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[09:18:01.535] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:18:01.535] <TB2> INFO: PixTestAlive::doTest() done, duration: 13 seconds
[09:18:01.566] <TB2> INFO: enter test to run
[09:18:01.566] <TB2> INFO: test: no parameter change
[09:18:01.694] <TB2> QUIET: Connection to board 162 closed.
[09:18:01.774] <TB2> INFO: pXar: this is the end, my friend
commander_RetrimHotPixels.log
[09:23:17.862] <TB2> INFO: *** Welcome to pxar ***
[09:23:17.862] <TB2> INFO: *** Today: 2016/01/19
[09:23:17.922] <TB2> INFO: *** Version: b2d3
[09:23:17.922] <TB2> INFO: readRocDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//dacParameters35_C15.dat
[09:23:17.922] <TB2> INFO: readTbmDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[09:23:17.922] <TB2> INFO: readMaskFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//defaultMaskFile.dat
[09:23:17.922] <TB2> INFO: readTrimFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C15.dat
[09:23:18.003] <TB2> INFO: clk: 4
[09:23:18.003] <TB2> INFO: ctr: 4
[09:23:18.003] <TB2> INFO: sda: 19
[09:23:18.003] <TB2> INFO: tin: 9
[09:23:18.003] <TB2> INFO: level: 15
[09:23:18.003] <TB2> INFO: triggerdelay: 0
[09:23:18.003] <TB2> QUIET: Instanciating API for pxar prod-12
[09:23:18.003] <TB2> INFO: Log level: INFO
[09:23:18.017] <TB2> INFO: Found DTB DTB_WXENWR
[09:23:18.025] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[09:23:18.029] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[09:23:18.037] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[09:23:19.595] <TB2> INFO: DUT info:
[09:23:19.595] <TB2> INFO: The DUT currently contains the following objects:
[09:23:19.595] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[09:23:19.595] <TB2> INFO: TBM Core alpha (0): 7 registers set
[09:23:19.595] <TB2> INFO: TBM Core beta (1): 7 registers set
[09:23:19.595] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:23:19.595] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.595] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:23:19.997] <TB2> INFO: enter 'restricted' command line mode
[09:23:19.997] <TB2> INFO: enter test to run
[09:23:19.997] <TB2> INFO: test: delay setting parameters: ->5<-
[09:23:19.997] <TB2> INFO: delay test by 5 seconds...
[09:23:24.997] <TB2> INFO: enter test to run
[09:23:24.997] <TB2> INFO: test: highrate no parameter change
[09:23:24.997] <TB2> INFO: running: highrate
[09:23:24.997] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[09:23:25.208] <TB2> INFO: ----------------------------------------------------------------------
[09:23:25.208] <TB2> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[09:23:25.208] <TB2> INFO: ----------------------------------------------------------------------
[09:23:25.208] <TB2> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[09:23:25.208] <TB2> INFO: edge/corner pixel THR is adjusted
[09:23:25.208] <TB2> INFO: PixTestHighRate::trimHotPixels: step 0...
[09:23:26.171] <TB2> INFO: Collecting data for 1 seconds...
[09:23:27.172] <TB2> INFO: Done with hot pixel readout
[09:23:33.290] <TB2> INFO: PixTest:: pg_setup set to default.
[09:23:33.291] <TB2> INFO: 40 hot pixels found in step 0
[09:23:34.257] <TB2> INFO: Collecting data for 1 seconds...
[09:23:35.259] <TB2> INFO: Done with hot pixel readout
[09:23:41.432] <TB2> INFO: PixTest:: pg_setup set to default.
[09:23:41.433] <TB2> INFO: 32 hot pixels found in step 1
[09:23:42.399] <TB2> INFO: Collecting data for 1 seconds...
[09:23:43.400] <TB2> INFO: Done with hot pixel readout
[09:23:49.463] <TB2> INFO: PixTest:: pg_setup set to default.
[09:23:49.464] <TB2> INFO: 12 hot pixels found in step 2
[09:23:50.430] <TB2> INFO: Collecting data for 1 seconds...
[09:23:51.431] <TB2> INFO: Done with hot pixel readout
[09:23:57.391] <TB2> INFO: PixTest:: pg_setup set to default.
[09:23:57.391] <TB2> INFO: 1 hot pixels found in step 3
[09:23:58.356] <TB2> INFO: Collecting data for 1 seconds...
[09:23:59.357] <TB2> INFO: Done with hot pixel readout
[09:24:05.459] <TB2> INFO: PixTest:: pg_setup set to default.
[09:24:05.460] <TB2> INFO: 0 hot pixels found in step 4
[09:24:05.468] <TB2> INFO: 0 hot pixels could not be trimmed and have been masked.
[09:24:05.496] <TB2> INFO: PixTest::trimHotPixels() done
[09:24:05.496] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C0.dat
[09:24:05.502] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C1.dat
[09:24:05.508] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C2.dat
[09:24:05.514] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C3.dat
[09:24:05.520] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C4.dat
[09:24:05.526] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C5.dat
[09:24:05.532] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C6.dat
[09:24:05.538] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C7.dat
[09:24:05.544] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C8.dat
[09:24:05.550] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C9.dat
[09:24:05.556] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C10.dat
[09:24:05.562] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C11.dat
[09:24:05.568] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C12.dat
[09:24:05.574] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C13.dat
[09:24:05.580] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C14.dat
[09:24:05.586] <TB2> INFO: write trim parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//trimParameters35_C15.dat
[09:24:05.592] <TB2> INFO: write masked pixels into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//002_RetrimHotPixels_150//defaultMaskFile.dat
[09:24:05.623] <TB2> INFO: enter test to run
[09:24:05.623] <TB2> INFO: test: no parameter change
[09:24:05.778] <TB2> QUIET: Connection to board 162 closed.
[09:24:05.859] <TB2> INFO: pXar: this is the end, my friend
commander_HRData.log
[09:24:29.255] <TB2> INFO: *** Welcome to pxar ***
[09:24:29.255] <TB2> INFO: *** Today: 2016/01/19
[09:24:29.316] <TB2> INFO: *** Version: b2d3
[09:24:29.316] <TB2> INFO: readRocDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//003_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//003_HRData_50//dacParameters35_C15.dat
[09:24:29.317] <TB2> INFO: readTbmDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//003_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//003_HRData_50//tbmParameters_C0b.dat
[09:24:29.317] <TB2> INFO: readMaskFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//003_HRData_50//defaultMaskFile.dat
[09:24:29.317] <TB2> INFO: readTrimFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//003_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//003_HRData_50//trimParameters35_C15.dat
[09:24:29.396] <TB2> INFO: clk: 4
[09:24:29.396] <TB2> INFO: ctr: 4
[09:24:29.396] <TB2> INFO: sda: 19
[09:24:29.396] <TB2> INFO: tin: 9
[09:24:29.396] <TB2> INFO: level: 15
[09:24:29.396] <TB2> INFO: triggerdelay: 0
[09:24:29.397] <TB2> QUIET: Instanciating API for pxar prod-12
[09:24:29.397] <TB2> INFO: Log level: INFO
[09:24:29.410] <TB2> INFO: Found DTB DTB_WXENWR
[09:24:29.418] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[09:24:29.422] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[09:24:29.424] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[09:24:30.985] <TB2> INFO: DUT info:
[09:24:30.985] <TB2> INFO: The DUT currently contains the following objects:
[09:24:30.985] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[09:24:30.985] <TB2> INFO: TBM Core alpha (0): 7 registers set
[09:24:30.985] <TB2> INFO: TBM Core beta (1): 7 registers set
[09:24:30.985] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:24:30.985] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:30.986] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:24:31.387] <TB2> INFO: enter 'restricted' command line mode
[09:24:31.387] <TB2> INFO: enter test to run
[09:24:31.387] <TB2> INFO: test: delay setting parameters: ->5<-
[09:24:31.387] <TB2> INFO: delay test by 5 seconds...
[09:24:36.388] <TB2> INFO: enter test to run
[09:24:36.388] <TB2> INFO: test: Xray no parameter change
[09:24:36.388] <TB2> INFO: running: xray
[09:24:36.388] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//003_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//003_HRData_50//phCalibrationFitErr35_C15.dat
[09:24:36.581] <TB2> INFO: ######################################################################
[09:24:36.581] <TB2> INFO: PixTestXray::doTest()
[09:24:36.581] <TB2> INFO: ######################################################################
[09:24:36.581] <TB2> INFO: ----------------------------------------------------------------------
[09:24:36.581] <TB2> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[09:24:36.581] <TB2> INFO: ----------------------------------------------------------------------
[09:24:37.552] <TB2> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[09:24:43.681] <TB2> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[09:25:07.140] <TB2> INFO: Resuming triggers.
[09:25:13.278] <TB2> INFO: run duration 12 seconds, buffer almost full (81%), pausing triggers.
[09:25:37.149] <TB2> INFO: Resuming triggers.
[09:25:43.285] <TB2> INFO: run duration 18 seconds, buffer almost full (81%), pausing triggers.
[09:26:06.512] <TB2> INFO: Resuming triggers.
[09:26:12.648] <TB2> INFO: run duration 24 seconds, buffer almost full (81%), pausing triggers.
[09:26:35.622] <TB2> INFO: Resuming triggers.
[09:26:41.760] <TB2> INFO: run duration 30 seconds, buffer almost full (81%), pausing triggers.
[09:27:05.777] <TB2> INFO: Resuming triggers.
[09:27:11.911] <TB2> INFO: run duration 36 seconds, buffer almost full (81%), pausing triggers.
[09:27:35.863] <TB2> INFO: Resuming triggers.
[09:27:42.000] <TB2> INFO: run duration 42 seconds, buffer almost full (81%), pausing triggers.
[09:28:06.019] <TB2> INFO: Resuming triggers.
[09:28:12.155] <TB2> INFO: run duration 49 seconds, buffer almost full (81%), pausing triggers.
[09:28:35.548] <TB2> INFO: Resuming triggers.
[09:28:41.686] <TB2> INFO: run duration 55 seconds, buffer almost full (81%), pausing triggers.
[09:29:05.500] <TB2> INFO: Resuming triggers.
[09:29:11.638] <TB2> INFO: run duration 61 seconds, buffer almost full (81%), pausing triggers.
[09:29:35.999] <TB2> INFO: Resuming triggers.
[09:29:42.135] <TB2> INFO: run duration 67 seconds, buffer almost full (81%), pausing triggers.
[09:30:06.517] <TB2> INFO: Resuming triggers.
[09:30:12.654] <TB2> INFO: run duration 73 seconds, buffer almost full (81%), pausing triggers.
[09:30:36.352] <TB2> INFO: Resuming triggers.
[09:30:42.488] <TB2> INFO: run duration 79 seconds, buffer almost full (81%), pausing triggers.
[09:31:05.810] <TB2> INFO: Resuming triggers.
[09:31:11.946] <TB2> INFO: run duration 85 seconds, buffer almost full (81%), pausing triggers.
[09:31:35.869] <TB2> INFO: Resuming triggers.
[09:31:42.002] <TB2> INFO: run duration 91 seconds, buffer almost full (81%), pausing triggers.
[09:32:06.042] <TB2> INFO: Resuming triggers.
[09:32:12.178] <TB2> INFO: run duration 98 seconds, buffer almost full (81%), pausing triggers.
[09:32:36.628] <TB2> INFO: Resuming triggers.
[09:32:38.506] <TB2> INFO: data taking finished, elapsed time: 100 seconds.
[09:32:45.883] <TB2> INFO: PixTest:: pg_setup set to default.
[09:32:45.885] <TB2> INFO: PixTestXray::doPhRun() done
[09:32:45.885] <TB2> INFO: PixTestXray::doTest() done
[09:32:46.075] <TB2> INFO: enter test to run
[09:32:46.075] <TB2> INFO: test: no parameter change
[09:32:46.264] <TB2> QUIET: Connection to board 162 closed.
[09:32:46.344] <TB2> INFO: pXar: this is the end, my friend
commander_HRData.log
[09:34:33.350] <TB2> INFO: *** Welcome to pxar ***
[09:34:33.350] <TB2> INFO: *** Today: 2016/01/19
[09:34:33.409] <TB2> INFO: *** Version: b2d3
[09:34:33.409] <TB2> INFO: readRocDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//004_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//004_HRData_150//dacParameters35_C15.dat
[09:34:33.409] <TB2> INFO: readTbmDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//004_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//004_HRData_150//tbmParameters_C0b.dat
[09:34:33.409] <TB2> INFO: readMaskFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//004_HRData_150//defaultMaskFile.dat
[09:34:33.409] <TB2> INFO: readTrimFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//004_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//004_HRData_150//trimParameters35_C15.dat
[09:34:33.480] <TB2> INFO: clk: 4
[09:34:33.480] <TB2> INFO: ctr: 4
[09:34:33.480] <TB2> INFO: sda: 19
[09:34:33.480] <TB2> INFO: tin: 9
[09:34:33.480] <TB2> INFO: level: 15
[09:34:33.480] <TB2> INFO: triggerdelay: 0
[09:34:33.480] <TB2> QUIET: Instanciating API for pxar prod-12
[09:34:33.480] <TB2> INFO: Log level: INFO
[09:34:33.493] <TB2> INFO: Found DTB DTB_WXENWR
[09:34:33.502] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[09:34:33.505] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[09:34:33.507] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[09:34:35.093] <TB2> INFO: DUT info:
[09:34:35.093] <TB2> INFO: The DUT currently contains the following objects:
[09:34:35.093] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[09:34:35.093] <TB2> INFO: TBM Core alpha (0): 7 registers set
[09:34:35.093] <TB2> INFO: TBM Core beta (1): 7 registers set
[09:34:35.093] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:34:35.093] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.093] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:34:35.494] <TB2> INFO: enter 'restricted' command line mode
[09:34:35.494] <TB2> INFO: enter test to run
[09:34:35.494] <TB2> INFO: test: delay setting parameters: ->5<-
[09:34:35.494] <TB2> INFO: delay test by 5 seconds...
[09:34:40.494] <TB2> INFO: enter test to run
[09:34:40.494] <TB2> INFO: test: Xray no parameter change
[09:34:40.494] <TB2> INFO: running: xray
[09:34:40.494] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//004_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//004_HRData_150//phCalibrationFitErr35_C15.dat
[09:34:40.663] <TB2> INFO: ######################################################################
[09:34:40.663] <TB2> INFO: PixTestXray::doTest()
[09:34:40.663] <TB2> INFO: ######################################################################
[09:34:40.663] <TB2> INFO: ----------------------------------------------------------------------
[09:34:40.663] <TB2> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[09:34:40.663] <TB2> INFO: ----------------------------------------------------------------------
[09:34:41.634] <TB2> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[09:34:44.851] <TB2> INFO: run duration 3 seconds, buffer almost full (81%), pausing triggers.
[09:35:09.273] <TB2> INFO: Resuming triggers.
[09:35:12.504] <TB2> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[09:35:37.308] <TB2> INFO: Resuming triggers.
[09:35:40.537] <TB2> INFO: run duration 9 seconds, buffer almost full (81%), pausing triggers.
[09:36:05.623] <TB2> INFO: Resuming triggers.
[09:36:08.850] <TB2> INFO: run duration 12 seconds, buffer almost full (81%), pausing triggers.
[09:36:32.974] <TB2> INFO: Resuming triggers.
[09:36:36.202] <TB2> INFO: run duration 16 seconds, buffer almost full (81%), pausing triggers.
[09:37:00.924] <TB2> INFO: Resuming triggers.
[09:37:04.154] <TB2> INFO: run duration 19 seconds, buffer almost full (81%), pausing triggers.
[09:37:29.688] <TB2> INFO: Resuming triggers.
[09:37:32.917] <TB2> INFO: run duration 22 seconds, buffer almost full (81%), pausing triggers.
[09:37:57.635] <TB2> INFO: Resuming triggers.
[09:38:00.861] <TB2> INFO: run duration 25 seconds, buffer almost full (81%), pausing triggers.
[09:38:25.470] <TB2> INFO: Resuming triggers.
[09:38:28.694] <TB2> INFO: run duration 29 seconds, buffer almost full (81%), pausing triggers.
[09:38:53.885] <TB2> INFO: Resuming triggers.
[09:38:57.109] <TB2> INFO: run duration 32 seconds, buffer almost full (81%), pausing triggers.
[09:39:21.598] <TB2> INFO: Resuming triggers.
[09:39:24.820] <TB2> INFO: run duration 35 seconds, buffer almost full (81%), pausing triggers.
[09:39:50.097] <TB2> INFO: Resuming triggers.
[09:39:53.320] <TB2> INFO: run duration 38 seconds, buffer almost full (81%), pausing triggers.
[09:40:18.303] <TB2> INFO: Resuming triggers.
[09:40:21.521] <TB2> INFO: run duration 41 seconds, buffer almost full (81%), pausing triggers.
[09:40:45.478] <TB2> INFO: Resuming triggers.
[09:40:48.696] <TB2> INFO: run duration 45 seconds, buffer almost full (81%), pausing triggers.
[09:41:14.372] <TB2> INFO: Resuming triggers.
[09:41:17.591] <TB2> INFO: run duration 48 seconds, buffer almost full (81%), pausing triggers.
[09:41:42.195] <TB2> INFO: Resuming triggers.
[09:41:45.413] <TB2> INFO: run duration 51 seconds, buffer almost full (81%), pausing triggers.
[09:42:10.180] <TB2> INFO: Resuming triggers.
[09:42:13.396] <TB2> INFO: run duration 54 seconds, buffer almost full (81%), pausing triggers.
[09:42:37.909] <TB2> INFO: Resuming triggers.
[09:42:41.129] <TB2> INFO: run duration 57 seconds, buffer almost full (81%), pausing triggers.
[09:43:04.967] <TB2> INFO: Resuming triggers.
[09:43:08.184] <TB2> INFO: run duration 61 seconds, buffer almost full (81%), pausing triggers.
[09:43:33.170] <TB2> INFO: Resuming triggers.
[09:43:36.386] <TB2> INFO: run duration 64 seconds, buffer almost full (81%), pausing triggers.
[09:44:00.976] <TB2> INFO: Resuming triggers.
[09:44:04.191] <TB2> INFO: run duration 67 seconds, buffer almost full (81%), pausing triggers.
[09:44:29.305] <TB2> INFO: Resuming triggers.
[09:44:32.519] <TB2> INFO: run duration 70 seconds, buffer almost full (81%), pausing triggers.
[09:44:57.422] <TB2> INFO: Resuming triggers.
[09:45:00.639] <TB2> INFO: run duration 74 seconds, buffer almost full (81%), pausing triggers.
[09:45:25.483] <TB2> INFO: Resuming triggers.
[09:45:28.698] <TB2> INFO: run duration 77 seconds, buffer almost full (81%), pausing triggers.
[09:45:52.686] <TB2> INFO: Resuming triggers.
[09:45:55.903] <TB2> INFO: run duration 80 seconds, buffer almost full (81%), pausing triggers.
[09:46:20.362] <TB2> INFO: Resuming triggers.
[09:46:23.581] <TB2> INFO: run duration 83 seconds, buffer almost full (81%), pausing triggers.
[09:46:46.992] <TB2> INFO: Resuming triggers.
[09:46:50.207] <TB2> INFO: run duration 86 seconds, buffer almost full (81%), pausing triggers.
[09:47:14.266] <TB2> INFO: Resuming triggers.
[09:47:17.481] <TB2> INFO: run duration 90 seconds, buffer almost full (81%), pausing triggers.
[09:47:42.067] <TB2> INFO: Resuming triggers.
[09:47:45.282] <TB2> INFO: run duration 93 seconds, buffer almost full (81%), pausing triggers.
[09:48:09.834] <TB2> INFO: Resuming triggers.
[09:48:13.051] <TB2> INFO: run duration 96 seconds, buffer almost full (81%), pausing triggers.
[09:48:35.530] <TB2> INFO: Resuming triggers.
[09:48:38.745] <TB2> INFO: run duration 99 seconds, buffer almost full (81%), pausing triggers.
[09:48:54.498] <TB2> ERROR: <datapipe.cc/CheckEventValidity:L491> Channel 2 Number of ROCs (5) != Token Chain Length (4)

[09:48:54.498] <TB2> ERROR: <datapipe.cc/Read:L164> Dumping the flawed event +- 3 events:

[09:48:54.498] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a220 80b1 4c19 320 2464 4c19 20a 244a 648 2a45 4c19 20b 2847 28b 242d 50c 2022 60c 2245 4c19 843 224f fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff e000 c000

[09:48:54.498] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a21a 8000 4c18 353 2467 4c18 a1 284f 245 2046 4c2 2042 519 224a 842 2642 4c18 69b 224c 6dc 204f 854 2464 4c18 92 2640 104 2449 688 262d 803 224f e000 c000

[09:48:54.498] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a21b 8040 4c18 4e0 2444 555 2022 4c18 314 2a4d 4c18 212 2446 4c18 d9 2665 21b 2249 495 2a87 fff 2fff e000 c000

[09:48:54.498] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a21c 80b1 4c18 81 2266 862 2a44 4c18 55d 224d 55d 2665 4c18 4c18 60 226a 691 2862 752 206f 754 2647 fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff e000 c000

[09:48:54.498] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a21d 80c0 4c18 353 2048 74a 2623 4c18 744 284f 4c18 201 246b 219 2643 2c2 204a 4c18 4c1b 2040 240 2441 29a 2246 2dd 226e e000 c000

[09:48:54.498] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a21e 8000 4c18 80a 224f 4c18 2c3 2a60 60c 2447 713 284a 755 242e 755 2068 4c18 4c18 54c 242f 619 2245 81d 2845 e000 c000

[09:48:54.498] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a21f 8040 4c1a 8a 2a66 4c1a d 2a6b 20c 2068 2e2 2a4f 514 2223 6da 2064 4c1a 4c1a 40c 2642 e000 c000

[09:49:02.253] <TB2> INFO: Resuming triggers.
[09:49:02.483] <TB2> INFO: data taking finished, elapsed time: 100 seconds.
[09:49:04.581] <TB2> INFO: PixTest:: pg_setup set to default.
[09:49:04.583] <TB2> INFO: PixTestXray::doPhRun() done
[09:49:04.583] <TB2> INFO: PixTestXray::doTest() done
[09:49:04.770] <TB2> INFO: enter test to run
[09:49:04.770] <TB2> INFO: test: no parameter change
[09:49:05.027] <TB2> QUIET: Connection to board 162 closed.
[09:49:05.107] <TB2> INFO: pXar: this is the end, my friend
commander_HRSCurves.log
[09:51:47.293] <TB2> INFO: *** Welcome to pxar ***
[09:51:47.293] <TB2> INFO: *** Today: 2016/01/19
[09:51:47.355] <TB2> INFO: *** Version: b2d3
[09:51:47.355] <TB2> INFO: readRocDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//005_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//005_HRSCurves_100//dacParameters35_C15.dat
[09:51:47.356] <TB2> INFO: readTbmDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//005_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//005_HRSCurves_100//tbmParameters_C0b.dat
[09:51:47.356] <TB2> INFO: readMaskFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//005_HRSCurves_100//defaultMaskFile.dat
[09:51:47.356] <TB2> INFO: readTrimFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//005_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//005_HRSCurves_100//trimParameters35_C15.dat
[09:51:47.430] <TB2> INFO: clk: 4
[09:51:47.430] <TB2> INFO: ctr: 4
[09:51:47.430] <TB2> INFO: sda: 19
[09:51:47.430] <TB2> INFO: tin: 9
[09:51:47.430] <TB2> INFO: level: 15
[09:51:47.430] <TB2> INFO: triggerdelay: 0
[09:51:47.430] <TB2> QUIET: Instanciating API for pxar prod-12
[09:51:47.430] <TB2> INFO: Log level: INFO
[09:51:47.443] <TB2> INFO: Found DTB DTB_WXENWR
[09:51:47.451] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[09:51:47.455] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[09:51:47.457] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[09:51:49.004] <TB2> INFO: DUT info:
[09:51:49.004] <TB2> INFO: The DUT currently contains the following objects:
[09:51:49.004] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[09:51:49.004] <TB2> INFO: TBM Core alpha (0): 7 registers set
[09:51:49.004] <TB2> INFO: TBM Core beta (1): 7 registers set
[09:51:49.004] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:51:49.004] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.004] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.004] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.004] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.004] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.004] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.004] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.004] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.005] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.005] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.005] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.005] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.005] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.005] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.005] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.005] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:51:49.406] <TB2> INFO: enter 'restricted' command line mode
[09:51:49.406] <TB2> INFO: enter test to run
[09:51:49.406] <TB2> INFO: test: Highrate no parameter change
[09:51:49.406] <TB2> INFO: running: highrate
[09:51:49.406] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//005_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//005_HRSCurves_100//phCalibrationFitErr35_C15.dat
[09:51:49.541] <TB2> INFO: ----------------------------------------------------------------------
[09:51:49.542] <TB2> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[09:51:49.542] <TB2> INFO: ----------------------------------------------------------------------
[09:51:49.548] <TB2> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 15 .. 75 (20/-1) hits flags = 896 (plus default)
[09:51:49.559] <TB2> INFO: dacScan step from 15 .. 34
[09:51:49.559] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[09:51:49.559] <TB2> INFO: run 1 of 1
[09:51:50.156] <TB2> INFO: Expecting 4160000 events.
[09:52:18.241] <TB2> INFO: 399600 events read in total (27554ms).
[09:52:45.579] <TB2> INFO: 802500 events read in total (54892ms).
[09:53:12.806] <TB2> INFO: 1205300 events read in total (82119ms).
[09:53:40.316] <TB2> INFO: 1608050 events read in total (109629ms).
[09:54:08.088] <TB2> INFO: 2011050 events read in total (137401ms).
[09:54:35.665] <TB2> INFO: 2413950 events read in total (164978ms).
[09:55:02.982] <TB2> INFO: 2816950 events read in total (192295ms).
[09:55:30.144] <TB2> INFO: 3219700 events read in total (219457ms).
[09:55:57.430] <TB2> INFO: 3622350 events read in total (246743ms).
[09:56:25.491] <TB2> INFO: 4024750 events read in total (274804ms).
[09:56:35.049] <TB2> INFO: 4160000 events read in total (284362ms).
[09:56:35.296] <TB2> INFO: Test took 285737ms.
[09:56:37.855] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[09:56:44.033] <TB2> INFO: dacScan step from 35 .. 54
[09:56:44.033] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[09:56:44.033] <TB2> INFO: run 1 of 1
[09:56:44.652] <TB2> INFO: Expecting 4160000 events.
[09:57:12.486] <TB2> INFO: 351750 events read in total (27306ms).
[09:57:39.133] <TB2> INFO: 705350 events read in total (53953ms).
[09:58:05.321] <TB2> INFO: 1058550 events read in total (80141ms).
[09:58:31.915] <TB2> INFO: 1410950 events read in total (106735ms).
[09:58:58.157] <TB2> INFO: 1762100 events read in total (132977ms).
[09:59:24.827] <TB2> INFO: 2112300 events read in total (159647ms).
[09:59:50.970] <TB2> INFO: 2460550 events read in total (185790ms).
[10:00:17.811] <TB2> INFO: 2806350 events read in total (212631ms).
[10:00:44.102] <TB2> INFO: 3149850 events read in total (238922ms).
[10:01:10.493] <TB2> INFO: 3491300 events read in total (265313ms).
[10:01:36.896] <TB2> INFO: 3831650 events read in total (291716ms).
[10:02:01.952] <TB2> INFO: 4160000 events read in total (316772ms).
[10:02:02.225] <TB2> INFO: Test took 318191ms.
[10:02:05.961] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:02:12.678] <TB2> INFO: dacScan step from 55 .. 74
[10:02:12.678] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[10:02:12.678] <TB2> INFO: run 1 of 1
[10:02:13.297] <TB2> INFO: Expecting 4160000 events.
[10:02:39.538] <TB2> INFO: 307150 events read in total (25713ms).
[10:03:05.319] <TB2> INFO: 615550 events read in total (51494ms).
[10:03:30.726] <TB2> INFO: 923900 events read in total (76901ms).
[10:03:56.409] <TB2> INFO: 1232250 events read in total (102584ms).
[10:04:21.894] <TB2> INFO: 1540600 events read in total (128069ms).
[10:04:47.403] <TB2> INFO: 1848750 events read in total (153578ms).
[10:05:12.703] <TB2> INFO: 2157050 events read in total (178878ms).
[10:05:37.847] <TB2> INFO: 2465200 events read in total (204022ms).
[10:06:03.219] <TB2> INFO: 2773350 events read in total (229394ms).
[10:06:29.045] <TB2> INFO: 3081400 events read in total (255220ms).
[10:06:54.484] <TB2> INFO: 3389600 events read in total (280659ms).
[10:07:20.061] <TB2> INFO: 3697950 events read in total (306236ms).
[10:07:45.306] <TB2> INFO: 4005850 events read in total (331481ms).
[10:07:58.707] <TB2> INFO: 4160000 events read in total (344882ms).
[10:07:59.128] <TB2> INFO: Test took 346450ms.
[10:08:01.349] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:08:07.310] <TB2> INFO: dacScan step from 75 .. 75
[10:08:07.310] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[10:08:07.310] <TB2> INFO: run 1 of 1
[10:08:07.918] <TB2> INFO: Expecting 208000 events.
[10:08:26.052] <TB2> INFO: 208000 events read in total (17607ms).
[10:08:26.060] <TB2> INFO: Test took 18749ms.
[10:08:26.151] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:08:26.433] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:27.555] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:28.581] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:29.607] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:30.673] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:31.753] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:32.884] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:33.950] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:35.057] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:36.167] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:37.269] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:38.365] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:39.432] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:40.498] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:41.525] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:42.553] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[10:08:43.586] <TB2> INFO: PixTest:: pg_setup set to default.
[10:08:43.588] <TB2> INFO: vcal mean: 39.45 39.64 39.14 44.00 43.93 45.82 44.67 45.21 43.96 42.97 42.49 42.11 42.82 40.00 39.33 39.67
[10:08:43.588] <TB2> INFO: vcal RMS: 1.12 1.17 1.03 1.95 1.39 1.38 2.19 1.53 1.39 1.35 1.42 1.65 1.42 1.48 1.13 1.31
[10:08:43.588] <TB2> INFO: number of X-ray hits detected: 211889 210394 202422 405659 402013 487858 497016 466319 428081 374018 388462 346389 370270 209991 210400 218605
[10:08:43.588] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:08:43.588] <TB2> INFO: X-ray hit rate [MHz/cm2]: 62.1 61.7 59.3 118.9 117.8 143.0 145.7 136.7 125.5 109.6 113.9 101.5 108.5 61.5 61.7 64.1
[10:08:43.588] <TB2> INFO: PixTestHighRate::doXNoiseMaps() done
[10:08:43.709] <TB2> INFO: enter test to run
[10:08:43.709] <TB2> INFO: test: no parameter change
[10:08:43.939] <TB2> QUIET: Connection to board 162 closed.
[10:08:44.034] <TB2> INFO: pXar: this is the end, my friend
commander_CalDelScanAndSaveDacs.log
[10:30:23.677] <TB2> INFO: *** Welcome to pxar ***
[10:30:23.677] <TB2> INFO: *** Today: 2016/01/19
[10:30:23.735] <TB2> INFO: *** Version: b2d3
[10:30:23.735] <TB2> INFO: readRocDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[10:30:23.736] <TB2> INFO: readTbmDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[10:30:23.736] <TB2> INFO: readMaskFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[10:30:23.736] <TB2> INFO: readTrimFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[10:30:23.815] <TB2> INFO: clk: 4
[10:30:23.815] <TB2> INFO: ctr: 4
[10:30:23.815] <TB2> INFO: sda: 19
[10:30:23.815] <TB2> INFO: tin: 9
[10:30:23.815] <TB2> INFO: level: 15
[10:30:23.815] <TB2> INFO: triggerdelay: 0
[10:30:23.815] <TB2> QUIET: Instanciating API for pxar prod-12
[10:30:23.815] <TB2> INFO: Log level: INFO
[10:30:23.829] <TB2> INFO: Found DTB DTB_WXENWR
[10:30:23.838] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:30:23.841] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:30:23.844] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[10:30:25.422] <TB2> INFO: DUT info:
[10:30:25.422] <TB2> INFO: The DUT currently contains the following objects:
[10:30:25.422] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:30:25.422] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:30:25.422] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:30:25.422] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:30:25.422] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.422] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:30:25.823] <TB2> INFO: enter 'restricted' command line mode
[10:30:25.823] <TB2> INFO: enter test to run
[10:30:25.823] <TB2> INFO: test: HighRate no parameter change
[10:30:25.824] <TB2> INFO: running: highrate
[10:30:25.824] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[10:30:25.959] <TB2> INFO: ----------------------------------------------------------------------
[10:30:25.959] <TB2> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[10:30:25.959] <TB2> INFO: ----------------------------------------------------------------------
[10:30:26.098] <TB2> INFO: Expecting 768 events.
[10:30:27.330] <TB2> INFO: 768 events read in total (512ms).
[10:30:27.425] <TB2> INFO: Test took 1460ms.
[10:30:28.054] <TB2> INFO: Expecting 41600 events.
[10:30:31.658] <TB2> INFO: 41600 events read in total (3076ms).
[10:30:31.660] <TB2> INFO: Test took 4230ms.
[10:30:31.744] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:30:32.396] <TB2> INFO: Expecting 41600 events.
[10:30:36.137] <TB2> INFO: 41600 events read in total (3213ms).
[10:30:36.140] <TB2> INFO: Test took 4365ms.
[10:30:36.235] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:30:36.902] <TB2> INFO: Expecting 41600 events.
[10:30:40.615] <TB2> INFO: 41600 events read in total (3185ms).
[10:30:40.617] <TB2> INFO: Test took 4343ms.
[10:30:40.711] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:30:41.373] <TB2> INFO: Expecting 41600 events.
[10:30:44.987] <TB2> INFO: 41600 events read in total (3086ms).
[10:30:44.989] <TB2> INFO: Test took 4240ms.
[10:30:45.073] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:30:45.718] <TB2> INFO: Expecting 41600 events.
[10:30:49.357] <TB2> INFO: 41600 events read in total (3112ms).
[10:30:49.360] <TB2> INFO: Test took 4255ms.
[10:30:49.443] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:30:50.087] <TB2> INFO: Expecting 41600 events.
[10:30:53.842] <TB2> INFO: 41600 events read in total (3227ms).
[10:30:53.844] <TB2> INFO: Test took 4370ms.
[10:30:53.931] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:30:54.578] <TB2> INFO: Expecting 41600 events.
[10:30:58.281] <TB2> INFO: 41600 events read in total (3176ms).
[10:30:58.283] <TB2> INFO: Test took 4318ms.
[10:30:58.369] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:30:59.013] <TB2> INFO: Expecting 41600 events.
[10:31:02.717] <TB2> INFO: 41600 events read in total (3176ms).
[10:31:02.720] <TB2> INFO: Test took 4320ms.
[10:31:02.816] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:31:03.476] <TB2> INFO: Expecting 41600 events.
[10:31:07.200] <TB2> INFO: 41600 events read in total (3196ms).
[10:31:07.202] <TB2> INFO: Test took 4351ms.
[10:31:07.289] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:31:07.935] <TB2> INFO: Expecting 41600 events.
[10:31:11.570] <TB2> INFO: 41600 events read in total (3107ms).
[10:31:11.572] <TB2> INFO: Test took 4251ms.
[10:31:11.656] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:31:12.301] <TB2> INFO: Expecting 41600 events.
[10:31:16.082] <TB2> INFO: 41600 events read in total (3253ms).
[10:31:16.084] <TB2> INFO: Test took 4397ms.
[10:31:16.170] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:31:16.817] <TB2> INFO: Expecting 41600 events.
[10:31:20.562] <TB2> INFO: 41600 events read in total (3218ms).
[10:31:20.564] <TB2> INFO: Test took 4361ms.
[10:31:20.660] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:31:21.311] <TB2> INFO: Expecting 41600 events.
[10:31:25.028] <TB2> INFO: 41600 events read in total (3189ms).
[10:31:25.031] <TB2> INFO: Test took 4333ms.
[10:31:25.124] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:31:25.787] <TB2> INFO: Expecting 41600 events.
[10:31:29.580] <TB2> INFO: 41600 events read in total (3265ms).
[10:31:29.582] <TB2> INFO: Test took 4416ms.
[10:31:29.669] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:31:30.314] <TB2> INFO: Expecting 41600 events.
[10:31:33.996] <TB2> INFO: 41600 events read in total (3154ms).
[10:31:33.997] <TB2> INFO: Test took 4296ms.
[10:31:34.081] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:31:34.737] <TB2> INFO: Expecting 41600 events.
[10:31:38.436] <TB2> INFO: 41600 events read in total (3172ms).
[10:31:38.438] <TB2> INFO: Test took 4323ms.
[10:31:38.523] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:31:39.172] <TB2> INFO: Expecting 41600 events.
[10:31:42.823] <TB2> INFO: 41600 events read in total (3123ms).
[10:31:42.825] <TB2> INFO: Test took 4267ms.
[10:31:42.909] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:31:43.572] <TB2> INFO: Expecting 41600 events.
[10:31:47.237] <TB2> INFO: 41600 events read in total (3137ms).
[10:31:47.239] <TB2> INFO: Test took 4296ms.
[10:31:47.323] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:31:47.967] <TB2> INFO: Expecting 41600 events.
[10:31:51.653] <TB2> INFO: 41600 events read in total (3158ms).
[10:31:51.655] <TB2> INFO: Test took 4300ms.
[10:31:51.740] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:31:52.386] <TB2> INFO: Expecting 41600 events.
[10:31:55.918] <TB2> INFO: 41600 events read in total (3004ms).
[10:31:55.920] <TB2> INFO: Test took 4148ms.
[10:31:56.024] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:31:56.381] <TB2> INFO: enter test to run
[10:31:56.381] <TB2> INFO: test: Pretest no parameter change
[10:31:56.381] <TB2> INFO: running: pretest
[10:31:56.381] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[10:31:56.381] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[10:31:56.381] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[10:31:56.381] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[10:31:56.381] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[10:31:56.382] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[10:31:56.382] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[10:31:56.382] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[10:31:56.382] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[10:31:56.382] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[10:31:56.382] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[10:31:56.382] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[10:31:56.382] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[10:31:56.382] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[10:31:56.382] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[10:31:56.383] <TB2> INFO: write dac parameters into /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[10:31:56.383] <TB2> INFO: enter test to run
[10:31:56.383] <TB2> INFO: test: no parameter change
[10:31:56.562] <TB2> QUIET: Connection to board 162 closed.
[10:31:56.642] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[10:32:30.385] <TB2> INFO: *** Welcome to pxar ***
[10:32:30.385] <TB2> INFO: *** Today: 2016/01/19
[10:32:30.444] <TB2> INFO: *** Version: b2d3
[10:32:30.444] <TB2> INFO: readRocDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//011_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//011_HREfficiency_50//dacParameters35_C15.dat
[10:32:30.445] <TB2> INFO: readTbmDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//011_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//011_HREfficiency_50//tbmParameters_C0b.dat
[10:32:30.446] <TB2> INFO: readMaskFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//011_HREfficiency_50//defaultMaskFile.dat
[10:32:30.446] <TB2> INFO: readTrimFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//011_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//011_HREfficiency_50//trimParameters35_C15.dat
[10:32:30.530] <TB2> INFO: clk: 4
[10:32:30.530] <TB2> INFO: ctr: 4
[10:32:30.530] <TB2> INFO: sda: 19
[10:32:30.530] <TB2> INFO: tin: 9
[10:32:30.530] <TB2> INFO: level: 15
[10:32:30.530] <TB2> INFO: triggerdelay: 0
[10:32:30.530] <TB2> QUIET: Instanciating API for pxar prod-12
[10:32:30.530] <TB2> INFO: Log level: INFO
[10:32:30.542] <TB2> INFO: Found DTB DTB_WXENWR
[10:32:30.551] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:32:30.554] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:32:30.557] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[10:32:32.131] <TB2> INFO: DUT info:
[10:32:32.131] <TB2> INFO: The DUT currently contains the following objects:
[10:32:32.131] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:32:32.131] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:32:32.131] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:32:32.131] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:32:32.131] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.131] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:32.532] <TB2> INFO: enter 'restricted' command line mode
[10:32:32.532] <TB2> INFO: enter test to run
[10:32:32.532] <TB2> INFO: test: PixelAlive no parameter change
[10:32:32.532] <TB2> INFO: running: pixelalive
[10:32:32.537] <TB2> INFO: ######################################################################
[10:32:32.537] <TB2> INFO: PixTestAlive::doTest()
[10:32:32.537] <TB2> INFO: ######################################################################
[10:32:32.538] <TB2> INFO: ----------------------------------------------------------------------
[10:32:32.538] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:32:32.538] <TB2> INFO: ----------------------------------------------------------------------
[10:32:32.855] <TB2> INFO: Expecting 208000 events.
[10:32:43.027] <TB2> INFO: 208000 events read in total (9453ms).
[10:32:43.050] <TB2> INFO: Test took 10509ms.
[10:32:43.057] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:32:43.324] <TB2> INFO: PixTestAlive::aliveTest() done
[10:32:43.324] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 3 0 0 4 0 0 0 0 1 0 0 0 1
[10:32:43.325] <TB2> INFO: ----------------------------------------------------------------------
[10:32:43.325] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:32:43.325] <TB2> INFO: ----------------------------------------------------------------------
[10:32:43.631] <TB2> INFO: Expecting 208000 events.
[10:32:50.464] <TB2> INFO: 208000 events read in total (6117ms).
[10:32:50.464] <TB2> INFO: Test took 7136ms.
[10:32:50.464] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:32:50.465] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:32:50.790] <TB2> INFO: PixTestAlive::maskTest() done
[10:32:50.790] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:32:50.791] <TB2> INFO: ----------------------------------------------------------------------
[10:32:50.791] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:32:50.791] <TB2> INFO: ----------------------------------------------------------------------
[10:32:51.099] <TB2> INFO: Expecting 208000 events.
[10:33:01.228] <TB2> INFO: 208000 events read in total (9412ms).
[10:33:01.229] <TB2> INFO: Test took 10436ms.
[10:33:01.239] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:33:01.481] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[10:33:01.481] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:33:01.481] <TB2> INFO: PixTestAlive::doTest() done, duration: 28 seconds
[10:33:01.521] <TB2> INFO: enter test to run
[10:33:01.521] <TB2> INFO: test: delay setting parameters: ->2<-
[10:33:01.521] <TB2> INFO: delay test by 2 seconds...
[10:33:03.521] <TB2> INFO: enter test to run
[10:33:03.521] <TB2> INFO: test: HighRate no parameter change
[10:33:03.521] <TB2> INFO: running: highrate
[10:33:03.521] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//011_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//011_HREfficiency_50//phCalibrationFitErr35_C15.dat
[10:33:03.681] <TB2> INFO: ----------------------------------------------------------------------
[10:33:03.681] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:33:03.681] <TB2> INFO: ----------------------------------------------------------------------
[10:33:04.288] <TB2> INFO: Expecting 208000 events.
[10:33:17.746] <TB2> INFO: 208000 events read in total (12930ms).
[10:33:17.751] <TB2> INFO: Test took 14065ms.
[10:33:18.048] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:33:18.343] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 2 0 0 4 0 0 0 0 1 0 0 0 1
[10:33:18.343] <TB2> INFO: number of red-efficiency pixels: 134 163 159 928 380 486 1544 444 371 305 269 277 318 168 157 145
[10:33:18.343] <TB2> INFO: number of X-ray hits detected: 104832 104204 98363 204446 201181 245194 249985 233874 212999 184509 193463 170226 183688 101880 102168 108235
[10:33:18.343] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:33:18.343] <TB2> INFO: number of Vcal hits detected: 207860 207832 207836 206815 207587 207476 205966 207518 207606 207684 207716 207662 207663 207825 207838 207802
[10:33:18.343] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.5 99.8 99.8 99.2 99.8 99.8 99.9 99.9 99.9 99.9 99.9 99.9 99.9
[10:33:18.343] <TB2> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.4 99.8 99.7 99.0 99.8 99.8 99.8 99.9 99.8 99.8 99.9 99.9 99.9
[10:33:18.343] <TB2> INFO: X-ray hit rate [MHz/cm2]: 30.7 30.5 28.8 59.9 59.0 71.9 73.3 68.6 62.4 54.1 56.7 49.9 53.8 29.9 29.9 31.7
[10:33:18.343] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[10:33:18.388] <TB2> INFO: PixTest:: pg_setup set to default.
[10:33:18.398] <TB2> INFO: enter test to run
[10:33:18.398] <TB2> INFO: test: no parameter change
[10:33:18.671] <TB2> QUIET: Connection to board 162 closed.
[10:33:18.751] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[10:33:55.049] <TB2> INFO: *** Welcome to pxar ***
[10:33:55.049] <TB2> INFO: *** Today: 2016/01/19
[10:33:55.110] <TB2> INFO: *** Version: b2d3
[10:33:55.110] <TB2> INFO: readRocDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//012_HREfficiency_75//dacParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//012_HREfficiency_75//dacParameters35_C15.dat
[10:33:55.111] <TB2> INFO: readTbmDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//012_HREfficiency_75//tbmParameters_C0a.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//012_HREfficiency_75//tbmParameters_C0b.dat
[10:33:55.111] <TB2> INFO: readMaskFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//012_HREfficiency_75//defaultMaskFile.dat
[10:33:55.111] <TB2> INFO: readTrimFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//012_HREfficiency_75//trimParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//012_HREfficiency_75//trimParameters35_C15.dat
[10:33:55.180] <TB2> INFO: clk: 4
[10:33:55.180] <TB2> INFO: ctr: 4
[10:33:55.180] <TB2> INFO: sda: 19
[10:33:55.180] <TB2> INFO: tin: 9
[10:33:55.180] <TB2> INFO: level: 15
[10:33:55.180] <TB2> INFO: triggerdelay: 0
[10:33:55.180] <TB2> QUIET: Instanciating API for pxar prod-12
[10:33:55.180] <TB2> INFO: Log level: INFO
[10:33:55.192] <TB2> INFO: Found DTB DTB_WXENWR
[10:33:55.203] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:33:55.206] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:33:55.209] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[10:33:56.754] <TB2> INFO: DUT info:
[10:33:56.754] <TB2> INFO: The DUT currently contains the following objects:
[10:33:56.754] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:33:56.754] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:33:56.754] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:33:56.754] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:33:56.754] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.754] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.754] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.754] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.754] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.754] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.754] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.755] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.755] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.755] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.755] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.755] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.755] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.755] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.755] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:56.755] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:33:57.156] <TB2> INFO: enter 'restricted' command line mode
[10:33:57.156] <TB2> INFO: enter test to run
[10:33:57.156] <TB2> INFO: test: PixelAlive no parameter change
[10:33:57.156] <TB2> INFO: running: pixelalive
[10:33:57.161] <TB2> INFO: ######################################################################
[10:33:57.161] <TB2> INFO: PixTestAlive::doTest()
[10:33:57.161] <TB2> INFO: ######################################################################
[10:33:57.163] <TB2> INFO: ----------------------------------------------------------------------
[10:33:57.163] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:33:57.163] <TB2> INFO: ----------------------------------------------------------------------
[10:33:57.470] <TB2> INFO: Expecting 208000 events.
[10:34:07.742] <TB2> INFO: 208000 events read in total (9553ms).
[10:34:07.758] <TB2> INFO: Test took 10593ms.
[10:34:07.765] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:34:08.031] <TB2> INFO: PixTestAlive::aliveTest() done
[10:34:08.031] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 3 0 0 3 0 0 0 0 1 0 0 0 1
[10:34:08.033] <TB2> INFO: ----------------------------------------------------------------------
[10:34:08.033] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:34:08.033] <TB2> INFO: ----------------------------------------------------------------------
[10:34:08.364] <TB2> INFO: Expecting 208000 events.
[10:34:15.090] <TB2> INFO: 208000 events read in total (6010ms).
[10:34:15.090] <TB2> INFO: Test took 7055ms.
[10:34:15.090] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:34:15.091] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:34:15.417] <TB2> INFO: PixTestAlive::maskTest() done
[10:34:15.417] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:34:15.419] <TB2> INFO: ----------------------------------------------------------------------
[10:34:15.419] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:34:15.419] <TB2> INFO: ----------------------------------------------------------------------
[10:34:15.726] <TB2> INFO: Expecting 208000 events.
[10:34:25.989] <TB2> INFO: 208000 events read in total (9547ms).
[10:34:25.989] <TB2> INFO: Test took 10568ms.
[10:34:25.996] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:34:26.245] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[10:34:26.245] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:34:26.245] <TB2> INFO: PixTestAlive::doTest() done, duration: 29 seconds
[10:34:26.274] <TB2> INFO: enter test to run
[10:34:26.274] <TB2> INFO: test: delay setting parameters: ->2<-
[10:34:26.274] <TB2> INFO: delay test by 2 seconds...
[10:34:28.274] <TB2> INFO: enter test to run
[10:34:28.274] <TB2> INFO: test: HighRate no parameter change
[10:34:28.274] <TB2> INFO: running: highrate
[10:34:28.274] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//012_HREfficiency_75//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//012_HREfficiency_75//phCalibrationFitErr35_C15.dat
[10:34:28.444] <TB2> INFO: ----------------------------------------------------------------------
[10:34:28.445] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:34:28.445] <TB2> INFO: ----------------------------------------------------------------------
[10:34:29.077] <TB2> INFO: Expecting 208000 events.
[10:34:44.427] <TB2> INFO: 208000 events read in total (14822ms).
[10:34:44.434] <TB2> INFO: Test took 15985ms.
[10:34:44.864] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:34:45.206] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 3 0 0 4 0 0 0 0 1 0 0 0 1
[10:34:45.206] <TB2> INFO: number of red-efficiency pixels: 259 253 277 904 733 1048 1430 916 729 700 546 516 575 265 270 263
[10:34:45.207] <TB2> INFO: number of X-ray hits detected: 153395 152876 145961 296849 293983 356593 363047 342055 312948 271798 283033 250811 268576 150823 152382 158708
[10:34:45.207] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:34:45.207] <TB2> INFO: number of Vcal hits detected: 207739 207740 207692 206788 207149 206726 205871 206923 207148 207205 207382 207389 207357 207712 207718 207673
[10:34:45.207] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.5 99.6 99.4 99.2 99.5 99.6 99.7 99.7 99.8 99.7 99.9 99.9 99.9
[10:34:45.207] <TB2> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.4 99.6 99.4 99.0 99.5 99.6 99.6 99.7 99.7 99.7 99.9 99.9 99.8
[10:34:45.207] <TB2> INFO: X-ray hit rate [MHz/cm2]: 45.0 44.8 42.8 87.0 86.2 104.5 106.4 100.3 91.7 79.7 83.0 73.5 78.7 44.2 44.7 46.5
[10:34:45.207] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[10:34:45.253] <TB2> INFO: PixTest:: pg_setup set to default.
[10:34:45.264] <TB2> INFO: enter test to run
[10:34:45.264] <TB2> INFO: test: no parameter change
[10:34:45.468] <TB2> QUIET: Connection to board 162 closed.
[10:34:45.547] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[10:35:21.913] <TB2> INFO: *** Welcome to pxar ***
[10:35:21.913] <TB2> INFO: *** Today: 2016/01/19
[10:35:21.986] <TB2> INFO: *** Version: b2d3
[10:35:21.986] <TB2> INFO: readRocDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//013_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//013_HREfficiency_100//dacParameters35_C15.dat
[10:35:21.987] <TB2> INFO: readTbmDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//013_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//013_HREfficiency_100//tbmParameters_C0b.dat
[10:35:21.987] <TB2> INFO: readMaskFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//013_HREfficiency_100//defaultMaskFile.dat
[10:35:21.987] <TB2> INFO: readTrimFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//013_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//013_HREfficiency_100//trimParameters35_C15.dat
[10:35:22.070] <TB2> INFO: clk: 4
[10:35:22.070] <TB2> INFO: ctr: 4
[10:35:22.070] <TB2> INFO: sda: 19
[10:35:22.070] <TB2> INFO: tin: 9
[10:35:22.070] <TB2> INFO: level: 15
[10:35:22.070] <TB2> INFO: triggerdelay: 0
[10:35:22.070] <TB2> QUIET: Instanciating API for pxar prod-12
[10:35:22.070] <TB2> INFO: Log level: INFO
[10:35:22.083] <TB2> INFO: Found DTB DTB_WXENWR
[10:35:22.092] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:35:22.095] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:35:22.098] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[10:35:23.641] <TB2> INFO: DUT info:
[10:35:23.641] <TB2> INFO: The DUT currently contains the following objects:
[10:35:23.641] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:35:23.641] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:35:23.641] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:35:23.641] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:35:23.641] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.641] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.641] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.641] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.642] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.642] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.642] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.642] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.642] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.642] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.642] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.642] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.642] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.642] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.642] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:23.642] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:24.042] <TB2> INFO: enter 'restricted' command line mode
[10:35:24.042] <TB2> INFO: enter test to run
[10:35:24.042] <TB2> INFO: test: PixelAlive no parameter change
[10:35:24.042] <TB2> INFO: running: pixelalive
[10:35:24.047] <TB2> INFO: ######################################################################
[10:35:24.047] <TB2> INFO: PixTestAlive::doTest()
[10:35:24.047] <TB2> INFO: ######################################################################
[10:35:24.048] <TB2> INFO: ----------------------------------------------------------------------
[10:35:24.048] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:35:24.048] <TB2> INFO: ----------------------------------------------------------------------
[10:35:24.356] <TB2> INFO: Expecting 208000 events.
[10:35:34.679] <TB2> INFO: 208000 events read in total (9603ms).
[10:35:34.692] <TB2> INFO: Test took 10641ms.
[10:35:34.701] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:35:34.969] <TB2> INFO: PixTestAlive::aliveTest() done
[10:35:34.969] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 3 0 0 4 0 0 0 0 1 0 0 0 1
[10:35:34.970] <TB2> INFO: ----------------------------------------------------------------------
[10:35:34.970] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:35:34.971] <TB2> INFO: ----------------------------------------------------------------------
[10:35:35.278] <TB2> INFO: Expecting 208000 events.
[10:35:42.070] <TB2> INFO: 208000 events read in total (6076ms).
[10:35:42.072] <TB2> INFO: Test took 7099ms.
[10:35:42.072] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:35:42.072] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:35:42.395] <TB2> INFO: PixTestAlive::maskTest() done
[10:35:42.395] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:35:42.398] <TB2> INFO: ----------------------------------------------------------------------
[10:35:42.398] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:35:42.398] <TB2> INFO: ----------------------------------------------------------------------
[10:35:42.722] <TB2> INFO: Expecting 208000 events.
[10:35:52.979] <TB2> INFO: 208000 events read in total (9541ms).
[10:35:52.980] <TB2> INFO: Test took 10580ms.
[10:35:52.989] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:35:53.238] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[10:35:53.238] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:35:53.238] <TB2> INFO: PixTestAlive::doTest() done, duration: 29 seconds
[10:35:53.270] <TB2> INFO: enter test to run
[10:35:53.270] <TB2> INFO: test: delay setting parameters: ->2<-
[10:35:53.270] <TB2> INFO: delay test by 2 seconds...
[10:35:55.270] <TB2> INFO: enter test to run
[10:35:55.270] <TB2> INFO: test: HighRate no parameter change
[10:35:55.270] <TB2> INFO: running: highrate
[10:35:55.270] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//013_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//013_HREfficiency_100//phCalibrationFitErr35_C15.dat
[10:35:55.405] <TB2> INFO: ----------------------------------------------------------------------
[10:35:55.405] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:35:55.405] <TB2> INFO: ----------------------------------------------------------------------
[10:35:56.006] <TB2> INFO: Expecting 208000 events.
[10:36:13.949] <TB2> INFO: 208000 events read in total (17416ms).
[10:36:13.963] <TB2> INFO: Test took 18553ms.
[10:36:14.575] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:36:14.959] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 3 0 0 4 0 0 0 0 1 0 0 0 1
[10:36:14.959] <TB2> INFO: number of red-efficiency pixels: 416 497 457 1434 1345 1837 2070 1699 1400 1233 1156 993 1091 542 499 398
[10:36:14.959] <TB2> INFO: number of X-ray hits detected: 210586 212092 201767 405721 402877 485581 496842 467519 428435 372997 388101 345139 368297 210277 210857 219247
[10:36:14.959] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:36:14.959] <TB2> INFO: number of Vcal hits detected: 207556 207469 207436 205940 206150 205197 204185 205650 206140 206374 206532 206705 206640 207326 207471 207525
[10:36:14.959] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.8 99.8 99.8 99.2 99.2 98.8 98.5 98.9 99.2 99.3 99.4 99.5 99.4 99.7 99.8 99.8
[10:36:14.959] <TB2> INFO: Vcal hit overall efficiency (%): 99.8 99.7 99.7 99.0 99.1 98.7 98.2 98.9 99.1 99.2 99.3 99.4 99.3 99.7 99.7 99.8
[10:36:14.959] <TB2> INFO: X-ray hit rate [MHz/cm2]: 61.7 62.2 59.1 118.9 118.1 142.3 145.6 137.0 125.6 109.3 113.8 101.2 108.0 61.6 61.8 64.3
[10:36:14.959] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[10:36:15.004] <TB2> INFO: PixTest:: pg_setup set to default.
[10:36:15.015] <TB2> INFO: enter test to run
[10:36:15.015] <TB2> INFO: test: no parameter change
[10:36:15.253] <TB2> QUIET: Connection to board 162 closed.
[10:36:15.333] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[10:36:52.365] <TB2> INFO: *** Welcome to pxar ***
[10:36:52.365] <TB2> INFO: *** Today: 2016/01/19
[10:36:52.423] <TB2> INFO: *** Version: b2d3
[10:36:52.423] <TB2> INFO: readRocDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//014_HREfficiency_125//dacParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//014_HREfficiency_125//dacParameters35_C15.dat
[10:36:52.424] <TB2> INFO: readTbmDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//014_HREfficiency_125//tbmParameters_C0a.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//014_HREfficiency_125//tbmParameters_C0b.dat
[10:36:52.424] <TB2> INFO: readMaskFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//014_HREfficiency_125//defaultMaskFile.dat
[10:36:52.424] <TB2> INFO: readTrimFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//014_HREfficiency_125//trimParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//014_HREfficiency_125//trimParameters35_C15.dat
[10:36:52.508] <TB2> INFO: clk: 4
[10:36:52.508] <TB2> INFO: ctr: 4
[10:36:52.508] <TB2> INFO: sda: 19
[10:36:52.508] <TB2> INFO: tin: 9
[10:36:52.508] <TB2> INFO: level: 15
[10:36:52.508] <TB2> INFO: triggerdelay: 0
[10:36:52.508] <TB2> QUIET: Instanciating API for pxar prod-12
[10:36:52.508] <TB2> INFO: Log level: INFO
[10:36:52.522] <TB2> INFO: Found DTB DTB_WXENWR
[10:36:52.531] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:36:52.534] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:36:52.537] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[10:36:54.108] <TB2> INFO: DUT info:
[10:36:54.108] <TB2> INFO: The DUT currently contains the following objects:
[10:36:54.108] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:36:54.108] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:36:54.108] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:36:54.108] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:36:54.108] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.108] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:54.509] <TB2> INFO: enter 'restricted' command line mode
[10:36:54.509] <TB2> INFO: enter test to run
[10:36:54.509] <TB2> INFO: test: PixelAlive no parameter change
[10:36:54.509] <TB2> INFO: running: pixelalive
[10:36:54.514] <TB2> INFO: ######################################################################
[10:36:54.514] <TB2> INFO: PixTestAlive::doTest()
[10:36:54.514] <TB2> INFO: ######################################################################
[10:36:54.516] <TB2> INFO: ----------------------------------------------------------------------
[10:36:54.516] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:36:54.516] <TB2> INFO: ----------------------------------------------------------------------
[10:36:54.865] <TB2> INFO: Expecting 208000 events.
[10:37:05.318] <TB2> INFO: 208000 events read in total (9734ms).
[10:37:05.333] <TB2> INFO: Test took 10815ms.
[10:37:05.340] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:37:05.606] <TB2> INFO: PixTestAlive::aliveTest() done
[10:37:05.606] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 3 0 0 3 0 0 0 0 1 0 0 0 1
[10:37:05.608] <TB2> INFO: ----------------------------------------------------------------------
[10:37:05.608] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:37:05.608] <TB2> INFO: ----------------------------------------------------------------------
[10:37:05.913] <TB2> INFO: Expecting 208000 events.
[10:37:12.656] <TB2> INFO: 208000 events read in total (6026ms).
[10:37:12.656] <TB2> INFO: Test took 7046ms.
[10:37:12.658] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:37:12.658] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:37:12.982] <TB2> INFO: PixTestAlive::maskTest() done
[10:37:12.982] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:37:12.984] <TB2> INFO: ----------------------------------------------------------------------
[10:37:12.984] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:37:12.984] <TB2> INFO: ----------------------------------------------------------------------
[10:37:13.290] <TB2> INFO: Expecting 208000 events.
[10:37:23.498] <TB2> INFO: 208000 events read in total (9492ms).
[10:37:23.498] <TB2> INFO: Test took 10511ms.
[10:37:23.507] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:37:23.751] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[10:37:23.751] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:37:23.751] <TB2> INFO: PixTestAlive::doTest() done, duration: 29 seconds
[10:37:23.794] <TB2> INFO: enter test to run
[10:37:23.794] <TB2> INFO: test: delay setting parameters: ->2<-
[10:37:23.794] <TB2> INFO: delay test by 2 seconds...
[10:37:25.794] <TB2> INFO: enter test to run
[10:37:25.794] <TB2> INFO: test: HighRate no parameter change
[10:37:25.794] <TB2> INFO: running: highrate
[10:37:25.795] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//014_HREfficiency_125//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//014_HREfficiency_125//phCalibrationFitErr35_C15.dat
[10:37:25.969] <TB2> INFO: ----------------------------------------------------------------------
[10:37:25.969] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:37:25.969] <TB2> INFO: ----------------------------------------------------------------------
[10:37:26.590] <TB2> INFO: Expecting 208000 events.
[10:37:46.080] <TB2> INFO: 208000 events read in total (18962ms).
[10:37:46.093] <TB2> INFO: Test took 20120ms.
[10:37:46.824] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:37:47.303] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 3 0 0 4 0 0 0 0 1 0 0 0 1
[10:37:47.303] <TB2> INFO: number of red-efficiency pixels: 559 753 626 1990 1874 2612 2723 2446 1969 1815 1745 1409 1664 699 713 619
[10:37:47.303] <TB2> INFO: number of X-ray hits detected: 256741 259079 248536 492617 486981 588067 602703 565566 517511 452871 473528 416568 449718 256211 256909 266518
[10:37:47.303] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:37:47.303] <TB2> INFO: number of Vcal hits detected: 207376 207149 207078 204709 204891 203109 201762 203862 205040 205132 205432 205991 205681 206964 207212 207281
[10:37:47.303] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.7 99.6 99.6 98.6 98.7 97.9 97.5 98.1 98.7 98.8 98.9 99.2 99.0 99.6 99.6 99.7
[10:37:47.303] <TB2> INFO: Vcal hit overall efficiency (%): 99.7 99.6 99.6 98.4 98.5 97.6 97.0 98.0 98.6 98.6 98.8 99.0 98.9 99.5 99.6 99.7
[10:37:47.303] <TB2> INFO: X-ray hit rate [MHz/cm2]: 75.3 75.9 72.8 144.4 142.7 172.4 176.7 165.8 151.7 132.7 138.8 122.1 131.8 75.1 75.3 78.1
[10:37:47.303] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[10:37:47.347] <TB2> INFO: PixTest:: pg_setup set to default.
[10:37:47.359] <TB2> INFO: enter test to run
[10:37:47.359] <TB2> INFO: test: no parameter change
[10:37:47.616] <TB2> QUIET: Connection to board 162 closed.
[10:37:47.695] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[10:38:21.573] <TB2> INFO: *** Welcome to pxar ***
[10:38:21.573] <TB2> INFO: *** Today: 2016/01/19
[10:38:21.633] <TB2> INFO: *** Version: b2d3
[10:38:21.633] <TB2> INFO: readRocDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//015_HREfficiency_150//dacParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//015_HREfficiency_150//dacParameters35_C15.dat
[10:38:21.634] <TB2> INFO: readTbmDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//015_HREfficiency_150//tbmParameters_C0a.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//015_HREfficiency_150//tbmParameters_C0b.dat
[10:38:21.634] <TB2> INFO: readMaskFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//015_HREfficiency_150//defaultMaskFile.dat
[10:38:21.634] <TB2> INFO: readTrimFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//015_HREfficiency_150//trimParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//015_HREfficiency_150//trimParameters35_C15.dat
[10:38:21.711] <TB2> INFO: clk: 4
[10:38:21.711] <TB2> INFO: ctr: 4
[10:38:21.711] <TB2> INFO: sda: 19
[10:38:21.711] <TB2> INFO: tin: 9
[10:38:21.711] <TB2> INFO: level: 15
[10:38:21.711] <TB2> INFO: triggerdelay: 0
[10:38:21.711] <TB2> QUIET: Instanciating API for pxar prod-12
[10:38:21.711] <TB2> INFO: Log level: INFO
[10:38:21.724] <TB2> INFO: Found DTB DTB_WXENWR
[10:38:21.732] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:38:21.735] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:38:21.738] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[10:38:23.287] <TB2> INFO: DUT info:
[10:38:23.288] <TB2> INFO: The DUT currently contains the following objects:
[10:38:23.288] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:38:23.288] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:38:23.288] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:38:23.288] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:38:23.288] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.288] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:38:23.689] <TB2> INFO: enter 'restricted' command line mode
[10:38:23.689] <TB2> INFO: enter test to run
[10:38:23.689] <TB2> INFO: test: PixelAlive no parameter change
[10:38:23.689] <TB2> INFO: running: pixelalive
[10:38:23.693] <TB2> INFO: ######################################################################
[10:38:23.693] <TB2> INFO: PixTestAlive::doTest()
[10:38:23.693] <TB2> INFO: ######################################################################
[10:38:23.695] <TB2> INFO: ----------------------------------------------------------------------
[10:38:23.695] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:38:23.695] <TB2> INFO: ----------------------------------------------------------------------
[10:38:24.021] <TB2> INFO: Expecting 208000 events.
[10:38:34.592] <TB2> INFO: 208000 events read in total (9852ms).
[10:38:34.614] <TB2> INFO: Test took 10917ms.
[10:38:34.621] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:38:34.887] <TB2> INFO: PixTestAlive::aliveTest() done
[10:38:34.887] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 3 0 0 3 0 0 0 0 1 0 0 0 1
[10:38:34.889] <TB2> INFO: ----------------------------------------------------------------------
[10:38:34.889] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:38:34.889] <TB2> INFO: ----------------------------------------------------------------------
[10:38:35.199] <TB2> INFO: Expecting 208000 events.
[10:38:42.019] <TB2> INFO: 208000 events read in total (6104ms).
[10:38:42.019] <TB2> INFO: Test took 7128ms.
[10:38:42.019] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:38:42.020] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:38:42.346] <TB2> INFO: PixTestAlive::maskTest() done
[10:38:42.346] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:38:42.348] <TB2> INFO: ----------------------------------------------------------------------
[10:38:42.348] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:38:42.348] <TB2> INFO: ----------------------------------------------------------------------
[10:38:42.669] <TB2> INFO: Expecting 208000 events.
[10:38:52.937] <TB2> INFO: 208000 events read in total (9552ms).
[10:38:52.937] <TB2> INFO: Test took 10587ms.
[10:38:52.944] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:38:53.195] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[10:38:53.195] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:38:53.195] <TB2> INFO: PixTestAlive::doTest() done, duration: 29 seconds
[10:38:53.225] <TB2> INFO: enter test to run
[10:38:53.225] <TB2> INFO: test: delay setting parameters: ->2<-
[10:38:53.225] <TB2> INFO: delay test by 2 seconds...
[10:38:55.225] <TB2> INFO: enter test to run
[10:38:55.225] <TB2> INFO: test: HighRate no parameter change
[10:38:55.225] <TB2> INFO: running: highrate
[10:38:55.225] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//015_HREfficiency_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//015_HREfficiency_150//phCalibrationFitErr35_C15.dat
[10:38:55.396] <TB2> INFO: ----------------------------------------------------------------------
[10:38:55.396] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:38:55.396] <TB2> INFO: ----------------------------------------------------------------------
[10:38:56.016] <TB2> INFO: Expecting 208000 events.
[10:39:19.197] <TB2> INFO: 208000 events read in total (22653ms).
[10:39:19.213] <TB2> INFO: Test took 23813ms.
[10:39:20.195] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:39:20.660] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 3 0 0 4 0 0 0 0 1 0 0 0 1
[10:39:20.660] <TB2> INFO: number of red-efficiency pixels: 830 1012 893 2698 2495 3260 3372 3130 2680 2405 2334 1942 2183 939 1004 857
[10:39:20.660] <TB2> INFO: number of X-ray hits detected: 304784 308654 297497 588151 580086 697772 714428 672587 614135 539121 560085 497206 534532 306529 307432 317599
[10:39:20.660] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:39:20.660] <TB2> INFO: number of Vcal hits detected: 207039 206810 206509 202390 202889 199903 197649 201261 202982 203420 203903 204734 204262 206338 206828 206953
[10:39:20.660] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.6 99.5 99.4 97.7 97.9 96.5 95.8 97.0 97.8 98.1 98.3 98.7 98.4 99.3 99.5 99.6
[10:39:20.660] <TB2> INFO: Vcal hit overall efficiency (%): 99.5 99.4 99.3 97.3 97.5 96.1 95.0 96.8 97.6 97.8 98.0 98.4 98.2 99.2 99.4 99.5
[10:39:20.660] <TB2> INFO: X-ray hit rate [MHz/cm2]: 89.3 90.5 87.2 172.4 170.0 204.5 209.4 197.1 180.0 158.0 164.2 145.7 156.7 89.8 90.1 93.1
[10:39:20.660] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[10:39:20.704] <TB2> INFO: PixTest:: pg_setup set to default.
[10:39:20.717] <TB2> INFO: enter test to run
[10:39:20.717] <TB2> INFO: test: no parameter change
[10:39:20.945] <TB2> QUIET: Connection to board 162 closed.
[10:39:21.025] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[10:39:54.759] <TB2> INFO: *** Welcome to pxar ***
[10:39:54.759] <TB2> INFO: *** Today: 2016/01/19
[10:39:54.819] <TB2> INFO: *** Version: b2d3
[10:39:54.819] <TB2> INFO: readRocDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//016_HREfficiency_200//dacParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//016_HREfficiency_200//dacParameters35_C15.dat
[10:39:54.819] <TB2> INFO: readTbmDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//016_HREfficiency_200//tbmParameters_C0a.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//016_HREfficiency_200//tbmParameters_C0b.dat
[10:39:54.820] <TB2> INFO: readMaskFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//016_HREfficiency_200//defaultMaskFile.dat
[10:39:54.820] <TB2> INFO: readTrimFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//016_HREfficiency_200//trimParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//016_HREfficiency_200//trimParameters35_C15.dat
[10:39:54.895] <TB2> INFO: clk: 4
[10:39:54.895] <TB2> INFO: ctr: 4
[10:39:54.895] <TB2> INFO: sda: 19
[10:39:54.895] <TB2> INFO: tin: 9
[10:39:54.895] <TB2> INFO: level: 15
[10:39:54.895] <TB2> INFO: triggerdelay: 0
[10:39:54.895] <TB2> QUIET: Instanciating API for pxar prod-12
[10:39:54.895] <TB2> INFO: Log level: INFO
[10:39:54.907] <TB2> INFO: Found DTB DTB_WXENWR
[10:39:54.916] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:39:54.919] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:39:54.921] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[10:39:56.489] <TB2> INFO: DUT info:
[10:39:56.489] <TB2> INFO: The DUT currently contains the following objects:
[10:39:56.489] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:39:56.489] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:39:56.489] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:39:56.489] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:39:56.489] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.489] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:39:56.890] <TB2> INFO: enter 'restricted' command line mode
[10:39:56.890] <TB2> INFO: enter test to run
[10:39:56.890] <TB2> INFO: test: PixelAlive no parameter change
[10:39:56.890] <TB2> INFO: running: pixelalive
[10:39:56.896] <TB2> INFO: ######################################################################
[10:39:56.896] <TB2> INFO: PixTestAlive::doTest()
[10:39:56.896] <TB2> INFO: ######################################################################
[10:39:56.897] <TB2> INFO: ----------------------------------------------------------------------
[10:39:56.897] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:39:56.897] <TB2> INFO: ----------------------------------------------------------------------
[10:39:57.248] <TB2> INFO: Expecting 208000 events.
[10:40:07.970] <TB2> INFO: 208000 events read in total (10002ms).
[10:40:07.981] <TB2> INFO: Test took 11082ms.
[10:40:07.990] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:40:08.265] <TB2> INFO: PixTestAlive::aliveTest() done
[10:40:08.265] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 2 0 0 4 0 0 0 0 1 0 0 0 1
[10:40:08.267] <TB2> INFO: ----------------------------------------------------------------------
[10:40:08.267] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:40:08.267] <TB2> INFO: ----------------------------------------------------------------------
[10:40:08.576] <TB2> INFO: Expecting 208000 events.
[10:40:15.504] <TB2> INFO: 208000 events read in total (6211ms).
[10:40:15.506] <TB2> INFO: Test took 7236ms.
[10:40:15.506] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:40:15.506] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:40:15.829] <TB2> INFO: PixTestAlive::maskTest() done
[10:40:15.829] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:40:15.830] <TB2> INFO: ----------------------------------------------------------------------
[10:40:15.830] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:40:15.830] <TB2> INFO: ----------------------------------------------------------------------
[10:40:16.143] <TB2> INFO: Expecting 208000 events.
[10:40:26.288] <TB2> INFO: 208000 events read in total (9429ms).
[10:40:26.289] <TB2> INFO: Test took 10457ms.
[10:40:26.298] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:40:26.543] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[10:40:26.543] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:40:26.543] <TB2> INFO: PixTestAlive::doTest() done, duration: 29 seconds
[10:40:26.577] <TB2> INFO: enter test to run
[10:40:26.577] <TB2> INFO: test: delay setting parameters: ->2<-
[10:40:26.577] <TB2> INFO: delay test by 2 seconds...
[10:40:28.577] <TB2> INFO: enter test to run
[10:40:28.578] <TB2> INFO: test: HighRate no parameter change
[10:40:28.578] <TB2> INFO: running: highrate
[10:40:28.578] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//016_HREfficiency_200//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//016_HREfficiency_200//phCalibrationFitErr35_C15.dat
[10:40:28.716] <TB2> INFO: ----------------------------------------------------------------------
[10:40:28.716] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:40:28.716] <TB2> INFO: ----------------------------------------------------------------------
[10:40:29.325] <TB2> INFO: Expecting 208000 events.
[10:40:57.166] <TB2> INFO: 205650 events read in total (27313ms).
[10:40:57.828] <TB2> INFO: 208000 events read in total (27975ms).
[10:40:57.842] <TB2> INFO: Test took 29121ms.
[10:40:58.936] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:40:59.513] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 1 0 0 3 0 0 0 0 1 0 0 0 1
[10:40:59.513] <TB2> INFO: number of red-efficiency pixels: 1404 1819 1360 3720 3546 4028 4038 4024 3798 3496 3577 3087 3413 1399 1896 1532
[10:40:59.513] <TB2> INFO: number of X-ray hits detected: 413587 420573 404921 793684 783665 940096 969673 903926 827623 725105 758190 670155 723648 419612 419533 429794
[10:40:59.513] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:40:59.513] <TB2> INFO: number of Vcal hits detected: 206159 205379 204663 195010 195681 188372 184654 191085 195389 197203 197481 200210 198820 204242 205288 205827
[10:40:59.513] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.2 98.8 98.7 94.4 94.7 91.4 90.0 92.4 94.4 95.4 95.5 96.7 96.0 98.5 98.8 99.1
[10:40:59.513] <TB2> INFO: Vcal hit overall efficiency (%): 99.1 98.7 98.4 93.8 94.1 90.6 88.8 91.9 93.9 94.8 94.9 96.3 95.6 98.2 98.7 99.0
[10:40:59.513] <TB2> INFO: X-ray hit rate [MHz/cm2]: 121.2 123.3 118.7 232.6 229.7 275.5 284.2 264.9 242.6 212.5 222.2 196.4 212.1 123.0 123.0 126.0
[10:40:59.513] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[10:40:59.557] <TB2> INFO: PixTest:: pg_setup set to default.
[10:40:59.575] <TB2> INFO: enter test to run
[10:40:59.575] <TB2> INFO: test: no parameter change
[10:40:59.831] <TB2> QUIET: Connection to board 162 closed.
[10:40:59.916] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[10:41:30.698] <TB2> INFO: *** Welcome to pxar ***
[10:41:30.698] <TB2> INFO: *** Today: 2016/01/19
[10:41:30.760] <TB2> INFO: *** Version: b2d3
[10:41:30.760] <TB2> INFO: readRocDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//017_HREfficiency_250//dacParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//017_HREfficiency_250//dacParameters35_C15.dat
[10:41:30.761] <TB2> INFO: readTbmDacs: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//017_HREfficiency_250//tbmParameters_C0a.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//017_HREfficiency_250//tbmParameters_C0b.dat
[10:41:30.761] <TB2> INFO: readMaskFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//017_HREfficiency_250//defaultMaskFile.dat
[10:41:30.761] <TB2> INFO: readTrimFile: /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//017_HREfficiency_250//trimParameters35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//017_HREfficiency_250//trimParameters35_C15.dat
[10:41:30.848] <TB2> INFO: clk: 4
[10:41:30.848] <TB2> INFO: ctr: 4
[10:41:30.848] <TB2> INFO: sda: 19
[10:41:30.848] <TB2> INFO: tin: 9
[10:41:30.848] <TB2> INFO: level: 15
[10:41:30.848] <TB2> INFO: triggerdelay: 0
[10:41:30.848] <TB2> QUIET: Instanciating API for pxar prod-12
[10:41:30.848] <TB2> INFO: Log level: INFO
[10:41:30.862] <TB2> INFO: Found DTB DTB_WXENWR
[10:41:30.870] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:41:30.873] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:41:30.876] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[10:41:32.453] <TB2> INFO: DUT info:
[10:41:32.453] <TB2> INFO: The DUT currently contains the following objects:
[10:41:32.453] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:41:32.453] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:41:32.453] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:41:32.453] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:41:32.453] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.453] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:32.854] <TB2> INFO: enter 'restricted' command line mode
[10:41:32.854] <TB2> INFO: enter test to run
[10:41:32.854] <TB2> INFO: test: PixelAlive no parameter change
[10:41:32.854] <TB2> INFO: running: pixelalive
[10:41:32.859] <TB2> INFO: ######################################################################
[10:41:32.859] <TB2> INFO: PixTestAlive::doTest()
[10:41:32.859] <TB2> INFO: ######################################################################
[10:41:32.861] <TB2> INFO: ----------------------------------------------------------------------
[10:41:32.861] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:41:32.861] <TB2> INFO: ----------------------------------------------------------------------
[10:41:33.175] <TB2> INFO: Expecting 208000 events.
[10:41:43.180] <TB2> INFO: 208000 events read in total (9286ms).
[10:41:43.182] <TB2> INFO: Test took 10319ms.
[10:41:43.192] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:41:43.463] <TB2> INFO: PixTestAlive::aliveTest() done
[10:41:43.463] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 2 0 0 3 0 0 0 0 1 0 0 0 1
[10:41:43.465] <TB2> INFO: ----------------------------------------------------------------------
[10:41:43.465] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:41:43.465] <TB2> INFO: ----------------------------------------------------------------------
[10:41:43.793] <TB2> INFO: Expecting 208000 events.
[10:41:50.635] <TB2> INFO: 208000 events read in total (6125ms).
[10:41:50.636] <TB2> INFO: Test took 7169ms.
[10:41:50.636] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:41:50.637] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:41:50.960] <TB2> INFO: PixTestAlive::maskTest() done
[10:41:50.960] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:41:50.962] <TB2> INFO: ----------------------------------------------------------------------
[10:41:50.962] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:41:50.962] <TB2> INFO: ----------------------------------------------------------------------
[10:41:51.270] <TB2> INFO: Expecting 208000 events.
[10:42:01.264] <TB2> INFO: 208000 events read in total (9277ms).
[10:42:01.264] <TB2> INFO: Test took 10300ms.
[10:42:01.274] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:42:01.517] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[10:42:01.517] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:42:01.517] <TB2> INFO: PixTestAlive::doTest() done, duration: 28 seconds
[10:42:01.546] <TB2> INFO: enter test to run
[10:42:01.546] <TB2> INFO: test: delay setting parameters: ->2<-
[10:42:01.546] <TB2> INFO: delay test by 2 seconds...
[10:42:03.546] <TB2> INFO: enter test to run
[10:42:03.546] <TB2> INFO: test: HighRate no parameter change
[10:42:03.546] <TB2> INFO: running: highrate
[10:42:03.547] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//017_HREfficiency_250//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2137_XrayQualification_2016-01-19_10h15m_1453194949//017_HREfficiency_250//phCalibrationFitErr35_C15.dat
[10:42:03.699] <TB2> INFO: ----------------------------------------------------------------------
[10:42:03.699] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:42:03.699] <TB2> INFO: ----------------------------------------------------------------------
[10:42:04.300] <TB2> INFO: Expecting 208000 events.
[10:42:20.814] <TB2> WARNING: Channel 1 ROC 2: Readback start marker after 12 readouts!

[10:42:20.814] <TB2> ERROR: <datapipe.cc/Read:L164> Dumping the flawed event +- 3 events:

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a13b 8040 4c38 c0 284d 2c0 2a81 41b 2469 708 2045 4c38 1d 2883 5 264e 12 224c 61c 2481 614 24a6 65d 2481 645 2a4e 4c38 282 286c 31d 28a1 4d9 2269 614 2485 65b 2464 4c38 11b 2462 10c 2a64 505 2080 715 2a4d 804 2a46 811 2a2f e002 c000

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a135 80c0 4c38 25d 246c 4d0 222d 4d0 2622 614 2487 610 244a 6da 2261 4c38 40c 222c 4dc 2860 614 246f 4c39 203 228c 28c 2a8a 4d2 2067 614 248a 611 204f 4c38 14 204e 12 246b 5 2480 3 286a 15 264b 20 2a65 42 226d 51 2280 285 2a4c 304 224f 34d 2065 520 2665 68a 2449 845 264d e002 c000

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a136 8000 4c38 41 2446 403 208a 4cc 240e 614 246d 608 2662 810 224a 4c38 91 2082 83 266d 10a 2041 109 206e 31d 2880 614 2485 611 2266 4c39 213 204b 549 2665 614 248f 641 284f 4c39 448 2044 448 224f 49c 208d 553 2468 614 2488 60b 2844 6c3 2a65 e002 c000

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a137 8040 4c38 43 2620 20c 2a2e 245 2067 30c 2a81 340 2642 458 2043 614 248c 4c38 d1 2861 552 2662 614 24af 613 2a6e 618 2662 6c4 224a 6ca 2a66 6d5 2282 6e0 264f 4c38 84 2049 85 2262 90 2248 a1 2666 119 2846 140 246a 15a 266f 4c39 48b 2685 51d 2664 614 24a8 609 2264 60d 2625 69c 202f e002 c000

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a138 80b1 4c39 24b 2684 614 244f 652 2a4f 6c2 204b 4c39 4c3b 206a 1c 206e 18 284a 15 2a4b 62 2a6d 6c8 2868 755 2442 762 2a4f 4c38 21 246d 19 2885 19 2482 18 286f 15 248d 14 204a 11 248e 0 2682 8 2682 11 2669 20 26a4 21 2287 113 2669 209 2a68 20c 2a4f 48c 2a64 4c38 240 282a 550 206e 559 2268 561 268e 614 24a4 60a 284a 694 2865 694 2a40 850 286c e002 c000

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a139 80c0 4c39 24b 2a88 295 246d 28c 2a62 311 2869 340 284f 614 246f 4c39 a 2462 4 284f 1 2065 13 224f 13 264b 90 2062 108 2a65 109 2249 251 22a8 2ca 244a 2c1 2462 2c4 264c 4c4 2a64 614 2484 64c 286f 4c39 4c38 c5 2266 cd 2665 29b 2285 622 286c 614 248f 60b 2465 810 224c 811 2a2c e002 c000

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a13a 8000 4c38 55d 2020 614 24a2 69b 2a41 4c38 8c 206e 121 2662 144 2687 620 2462 614 2483 61a 2242 759 2484 815 2a46 4c38 20c 2466 211 2a6a 2c2 268a 2e2 22a4 4a0 2680 614 24aa 6cd 244f 6c8 264e 4c39 289 266d 343 2041 522 2685 614 2481 e002 c000

[10:42:20.816] <TB2> WARNING: Channel 1 ROC 2: Readback start marker after 4 readouts!

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L164> Dumping the flawed event +- 3 events:

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a13f 8040 4c3a 14 2864 8 2445 c4 2646 2d4 2660 614 24a9 602 204a 6c1 2860 4c3a d5 2067 48c 244f 54b 2887 544 2a66 614 24a2 4c39 8c 2864 819 206c 805 2864 801 206c 804 224f 4c39 60 264c 160 2089 152 20a5 349 284f 344 264f 400 28a1 505 2288 614 24e3 69a 2085 68a 244f 6dc 280e e002 c000

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a139 80c0 4c39 24b 2a88 295 246d 28c 2a62 311 2869 340 284f 614 246f 4c39 a 2462 4 284f 1 2065 13 224f 13 264b 90 2062 108 2a65 109 2249 251 22a8 2ca 244a 2c1 2462 2c4 264c 4c4 2a64 614 2484 64c 286f 4c39 4c38 c5 2266 cd 2665 29b 2285 622 286c 614 248f 60b 2465 810 224c 811 2a2c e002 c000

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a13a 8000 4c38 55d 2020 614 24a2 69b 2a41 4c38 8c 206e 121 2662 144 2687 620 2462 614 2483 61a 2242 759 2484 815 2a46 4c38 20c 2466 211 2a6a 2c2 268a 2e2 22a4 4a0 2680 614 24aa 6cd 244f 6c8 264e 4c39 289 266d 343 2041 522 2685 614 2481 e002 c000

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a13b 8040 4c38 c0 284d 2c0 2a81 41b 2469 708 2045 4c38 1d 2883 5 264e 12 224c 61c 2481 614 24a6 65d 2481 645 2a4e 4c38 282 286c 31d 28a1 4d9 2269 614 2485 65b 2464 4c38 11b 2462 10c 2a64 505 2080 715 2a4d 804 2a46 811 2a2f e002 c000

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a13c 80b1 4c39 485 2644 504 2660 614 2485 6d9 2842 70b 226c 4c39 1c 2426 141 286e 298 2a80 41b 288a 415 2288 4dc 2064 4db 2862 55a 2a4e 614 2468 4c3a 1d 2462 1c 2466 14 206e c 2469 9 246a d 266e c1 206f 35a 286b 359 286f 54d 2464 54d 204c 54b 246a 541 2869 614 24ae 60d 2685 4c38 2d2 2269 2d4 2a48 308 224e 4c5 244e 614 248c 60d 2268 619 2a88 61c 224c 80c 242d e002 c000

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a13d 80c0 4c38 122 2282 2d9 206f 404 284b 500 2461 614 24a0 4c38 44 222a 155 2085 203 2087 215 266f 25d 288d 253 28a5 614 248b 600 2466 4c38 50 2843 40 2662 60 2282 350 286d 4cc 2a61 4cd 224f 553 2464 544 2a45 614 24a8 6e2 2662 4c3a 282 2083 614 24a1 e002 c000

[10:42:20.816] <TB2> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a13e 8000 4c38 614 2485 608 284a 713 2867 4c38 248 2a62 353 2664 4d8 2245 54a 2a6e 614 24ae 611 226f 644 2042 645 2a6c 689 2440 6d5 2040 703 2661 4c39 50 266d 9b 2461 81 224f 24a 2061 30c 2484 615 2861 614 24c3 4c38 202 244d 483 248a 614 24aa 60d 206c 60d 226d 6c1 2460 6c3 2640 6c4 2663 804 280a e002 c000

[10:42:33.870] <TB2> INFO: 177300 events read in total (29042ms).
[10:42:39.100] <TB2> INFO: 208000 events read in total (34272ms).
[10:42:39.121] <TB2> INFO: Test took 35418ms.
[10:42:40.620] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:42:41.275] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 1
[10:42:41.275] <TB2> INFO: number of red-efficiency pixels: 2120 2549 1832 4074 3999 4150 4153 4149 4095 3953 4035 3752 3961 1878 2690 2277
[10:42:41.275] <TB2> INFO: number of X-ray hits detected: 508730 515672 499195 980250 966650 1157909 1195995 1109549 1017535 885858 932100 826157 889666 517061 517505 531506
[10:42:41.275] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:42:41.275] <TB2> INFO: number of Vcal hits detected: 204545 203410 202059 183950 185723 172952 167559 177032 184621 188943 188868 193520 190335 201165 203214 204117
[10:42:41.275] <TB2> INFO: Vcal hit fiducial efficiency (%): 98.5 97.9 97.7 89.4 90.3 84.4 82.1 85.9 89.5 91.8 91.7 93.8 92.4 97.2 97.8 98.3
[10:42:41.275] <TB2> INFO: Vcal hit overall efficiency (%): 98.3 97.8 97.1 88.4 89.3 83.2 80.6 85.1 88.8 90.8 90.8 93.0 91.5 96.7 97.7 98.1
[10:42:41.275] <TB2> INFO: X-ray hit rate [MHz/cm2]: 149.1 151.1 146.3 287.3 283.3 339.4 350.6 325.2 298.2 259.7 273.2 242.2 260.8 151.6 151.7 155.8
[10:42:41.275] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[10:42:41.320] <TB2> INFO: PixTest:: pg_setup set to default.
[10:42:41.332] <TB2> INFO: enter test to run
[10:42:41.332] <TB2> INFO: test: no parameter change
[10:42:41.554] <TB2> QUIET: Connection to board 162 closed.
[10:42:41.634] <TB2> INFO: pXar: this is the end, my friend
MoReWeb-v1.0.0-5-g82d9ff6 on branch psi46master