Test Date: 2015-09-11 16:58
Analysis date: 2016-05-25 21:50
Logfile
commander_PixelAlive.log
[14:58:49.380] <TB0> INFO: *** Welcome to pxar ***
[14:58:49.380] <TB0> INFO: *** Today: 2015/09/11
[14:58:49.380] <TB0> INFO: readRocDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//000_PixelAlive_p17//dacParameters35_C15.dat
[14:58:49.381] <TB0> INFO: readTbmDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//000_PixelAlive_p17//tbmParameters_C0b.dat
[14:58:49.381] <TB0> INFO: readMaskFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//000_PixelAlive_p17//defaultMaskFile.dat
[14:58:49.381] <TB0> INFO: readTrimFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//000_PixelAlive_p17//trimParameters35_C15.dat
[14:58:49.447] <TB0> INFO: clk: 4
[14:58:49.447] <TB0> INFO: ctr: 4
[14:58:49.447] <TB0> INFO: sda: 19
[14:58:49.447] <TB0> INFO: tin: 9
[14:58:49.447] <TB0> INFO: level: 15
[14:58:49.447] <TB0> INFO: triggerdelay: 0
[14:58:49.447] <TB0> QUIET: Instanciating API for pxar prod-10+24~g09f6d2c
[14:58:49.447] <TB0> INFO: Log level: INFO
[14:58:49.461] <TB0> INFO: Found DTB DTB_WS6UZO
[14:58:49.470] <TB0> QUIET: Connection to board DTB_WS6UZO opened.
[14:58:49.473] <TB0> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 83
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WS6UZO
MAC address: 40D855118053
Hostname: pixelDTB083
Comment:
------------------------------------------------------
[14:58:49.475] <TB0> INFO: RPC call hashes of host and DTB match: 398089610
[14:58:50.986] <TB0> INFO: DUT info:
[14:58:50.986] <TB0> INFO: The DUT currently contains the following objects:
[14:58:50.986] <TB0> INFO: 2 TBM Cores tbm09c (2 ON)
[14:58:50.986] <TB0> INFO: TBM Core alpha (0): 7 registers set
[14:58:50.986] <TB0> INFO: TBM Core beta (1): 7 registers set
[14:58:50.986] <TB0> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[14:58:50.986] <TB0> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.986] <TB0> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.986] <TB0> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.986] <TB0> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.987] <TB0> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.987] <TB0> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.987] <TB0> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.987] <TB0> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.987] <TB0> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.987] <TB0> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.987] <TB0> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.987] <TB0> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.987] <TB0> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.987] <TB0> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.987] <TB0> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:50.987] <TB0> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[14:58:51.387] <TB0> INFO: enter 'restricted' command line mode
[14:58:51.387] <TB0> INFO: enter test to run
[14:58:51.387] <TB0> INFO: test: PixelAlive no parameter change
[14:58:51.387] <TB0> INFO: running: pixelalive
[14:58:51.391] <TB0> INFO: ######################################################################
[14:58:51.391] <TB0> INFO: PixTestAlive::doTest()
[14:58:51.391] <TB0> INFO: ######################################################################
[14:58:51.393] <TB0> INFO: ----------------------------------------------------------------------
[14:58:51.393] <TB0> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:58:51.393] <TB0> INFO: ----------------------------------------------------------------------
[14:58:51.695] <TB0> INFO: Expecting 41600 events.
[14:58:55.871] <TB0> INFO: 41600 events read in total (3458ms).
[14:58:55.951] <TB0> INFO: Test took 4557ms.
[14:58:55.957] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:58:56.207] <TB0> INFO: PixTestAlive::aliveTest() done
[14:58:56.207] <TB0> INFO: number of dead pixels (per ROC): 0 0 0 1 1 0 0 1 1 0 0 0 2 2 0 0
[14:58:56.208] <TB0> INFO: ----------------------------------------------------------------------
[14:58:56.209] <TB0> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:58:56.209] <TB0> INFO: ----------------------------------------------------------------------
[14:58:56.510] <TB0> INFO: Expecting 41600 events.
[14:58:59.837] <TB0> INFO: 41600 events read in total (2611ms).
[14:58:59.838] <TB0> INFO: Test took 3628ms.
[14:58:59.838] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:58:59.838] <TB0> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[14:59:00.156] <TB0> INFO: PixTestAlive::maskTest() done
[14:59:00.156] <TB0> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:59:00.158] <TB0> INFO: ----------------------------------------------------------------------
[14:59:00.158] <TB0> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:59:00.158] <TB0> INFO: ----------------------------------------------------------------------
[14:59:00.464] <TB0> INFO: Expecting 41600 events.
[14:59:05.345] <TB0> INFO: 41600 events read in total (4165ms).
[14:59:05.346] <TB0> INFO: Test took 5186ms.
[14:59:05.352] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:59:05.647] <TB0> INFO: PixTestAlive::addressDecodingTest() done
[14:59:05.647] <TB0> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:59:05.647] <TB0> INFO: PixTestAlive::doTest() done, duration: 14 seconds
[14:59:05.683] <TB0> INFO: enter test to run
[14:59:05.683] <TB0> INFO: test: no parameter change
[14:59:05.808] <TB0> QUIET: Connection to board 83 closed.
[14:59:05.887] <TB0> INFO: pXar: this is the end, my friend
commander_RetrimHotPixels.log
[15:04:20.423] <TB0> INFO: *** Welcome to pxar ***
[15:04:20.423] <TB0> INFO: *** Today: 2015/09/11
[15:04:20.423] <TB0> INFO: readRocDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//dacParameters35_C15.dat
[15:04:20.423] <TB0> INFO: readTbmDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[15:04:20.423] <TB0> INFO: readMaskFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//defaultMaskFile.dat
[15:04:20.423] <TB0> INFO: readTrimFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C15.dat
[15:04:20.492] <TB0> INFO: clk: 4
[15:04:20.492] <TB0> INFO: ctr: 4
[15:04:20.492] <TB0> INFO: sda: 19
[15:04:20.492] <TB0> INFO: tin: 9
[15:04:20.492] <TB0> INFO: level: 15
[15:04:20.492] <TB0> INFO: triggerdelay: 0
[15:04:20.492] <TB0> QUIET: Instanciating API for pxar prod-10+24~g09f6d2c
[15:04:20.492] <TB0> INFO: Log level: INFO
[15:04:20.506] <TB0> INFO: Found DTB DTB_WS6UZO
[15:04:20.514] <TB0> QUIET: Connection to board DTB_WS6UZO opened.
[15:04:20.517] <TB0> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 83
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WS6UZO
MAC address: 40D855118053
Hostname: pixelDTB083
Comment:
------------------------------------------------------
[15:04:20.520] <TB0> INFO: RPC call hashes of host and DTB match: 398089610
[15:04:22.030] <TB0> INFO: DUT info:
[15:04:22.030] <TB0> INFO: The DUT currently contains the following objects:
[15:04:22.030] <TB0> INFO: 2 TBM Cores tbm09c (2 ON)
[15:04:22.030] <TB0> INFO: TBM Core alpha (0): 7 registers set
[15:04:22.030] <TB0> INFO: TBM Core beta (1): 7 registers set
[15:04:22.030] <TB0> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[15:04:22.030] <TB0> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.030] <TB0> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[15:04:22.431] <TB0> INFO: enter 'restricted' command line mode
[15:04:22.431] <TB0> INFO: enter test to run
[15:04:22.431] <TB0> INFO: test: delay setting parameters: ->5<-
[15:04:22.431] <TB0> INFO: delay test by 5 seconds...
[15:04:27.431] <TB0> INFO: enter test to run
[15:04:27.431] <TB0> INFO: test: highrate no parameter change
[15:04:27.431] <TB0> INFO: running: highrate
[15:04:27.431] <TB0> INFO: readGainPedestalParameters /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[15:04:27.560] <TB0> INFO: ----------------------------------------------------------------------
[15:04:27.560] <TB0> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[15:04:27.560] <TB0> INFO: ----------------------------------------------------------------------
[15:04:27.560] <TB0> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[15:04:27.560] <TB0> INFO: edge/corner pixel THR is adjusted
[15:04:27.560] <TB0> INFO: PixTestHighRate::trimHotPixels: step 0...
[15:04:28.519] <TB0> INFO: Collecting data for 1 seconds...
[15:04:29.520] <TB0> INFO: Done with hot pixel readout
[15:04:36.676] <TB0> INFO: PixTest:: pg_setup set to default.
[15:04:36.677] <TB0> INFO: 5 hot pixels found in step 0
[15:04:37.643] <TB0> INFO: Collecting data for 1 seconds...
[15:04:38.645] <TB0> INFO: Done with hot pixel readout
[15:04:47.728] <TB0> INFO: PixTest:: pg_setup set to default.
[15:04:47.729] <TB0> INFO: 4 hot pixels found in step 1
[15:04:48.692] <TB0> INFO: Collecting data for 1 seconds...
[15:04:49.694] <TB0> INFO: Done with hot pixel readout
[15:04:58.588] <TB0> INFO: PixTest:: pg_setup set to default.
[15:04:58.589] <TB0> INFO: 3 hot pixels found in step 2
[15:04:59.552] <TB0> INFO: Collecting data for 1 seconds...
[15:05:00.554] <TB0> INFO: Done with hot pixel readout
[15:05:08.877] <TB0> INFO: PixTest:: pg_setup set to default.
[15:05:08.878] <TB0> INFO: 1 hot pixels found in step 3
[15:05:09.840] <TB0> INFO: Collecting data for 1 seconds...
[15:05:10.841] <TB0> INFO: Done with hot pixel readout
[15:05:19.364] <TB0> INFO: PixTest:: pg_setup set to default.
[15:05:19.365] <TB0> INFO: 0 hot pixels found in step 4
[15:05:19.379] <TB0> INFO: 0 hot pixels could not be trimmed and have been masked.
[15:05:19.417] <TB0> INFO: PixTest::trimHotPixels() done
[15:05:19.418] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C0.dat
[15:05:19.427] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C1.dat
[15:05:19.435] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C2.dat
[15:05:19.443] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C3.dat
[15:05:19.450] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C4.dat
[15:05:19.458] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C5.dat
[15:05:19.466] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C6.dat
[15:05:19.474] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C7.dat
[15:05:19.483] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C8.dat
[15:05:19.490] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C9.dat
[15:05:19.496] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C10.dat
[15:05:19.503] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C11.dat
[15:05:19.510] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C12.dat
[15:05:19.516] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C13.dat
[15:05:19.522] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C14.dat
[15:05:19.529] <TB0> INFO: write trim parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//trimParameters35_C15.dat
[15:05:19.535] <TB0> INFO: write masked pixels into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//002_RetrimHotPixels_150//defaultMaskFile.dat
[15:05:19.569] <TB0> INFO: enter test to run
[15:05:19.569] <TB0> INFO: test: no parameter change
[15:05:19.730] <TB0> QUIET: Connection to board 83 closed.
[15:05:19.810] <TB0> INFO: pXar: this is the end, my friend
commander_HRData.log
[15:05:39.357] <TB0> INFO: *** Welcome to pxar ***
[15:05:39.357] <TB0> INFO: *** Today: 2015/09/11
[15:05:39.357] <TB0> INFO: readRocDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//003_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//003_HRData_50//dacParameters35_C15.dat
[15:05:39.357] <TB0> INFO: readTbmDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//003_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//003_HRData_50//tbmParameters_C0b.dat
[15:05:39.357] <TB0> INFO: readMaskFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//003_HRData_50//defaultMaskFile.dat
[15:05:39.357] <TB0> INFO: readTrimFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//003_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//003_HRData_50//trimParameters35_C15.dat
[15:05:39.425] <TB0> INFO: clk: 4
[15:05:39.425] <TB0> INFO: ctr: 4
[15:05:39.425] <TB0> INFO: sda: 19
[15:05:39.425] <TB0> INFO: tin: 9
[15:05:39.425] <TB0> INFO: level: 15
[15:05:39.425] <TB0> INFO: triggerdelay: 0
[15:05:39.425] <TB0> QUIET: Instanciating API for pxar prod-10+24~g09f6d2c
[15:05:39.425] <TB0> INFO: Log level: INFO
[15:05:39.437] <TB0> INFO: Found DTB DTB_WS6UZO
[15:05:39.445] <TB0> QUIET: Connection to board DTB_WS6UZO opened.
[15:05:39.448] <TB0> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 83
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WS6UZO
MAC address: 40D855118053
Hostname: pixelDTB083
Comment:
------------------------------------------------------
[15:05:39.451] <TB0> INFO: RPC call hashes of host and DTB match: 398089610
[15:05:40.961] <TB0> INFO: DUT info:
[15:05:40.961] <TB0> INFO: The DUT currently contains the following objects:
[15:05:40.961] <TB0> INFO: 2 TBM Cores tbm09c (2 ON)
[15:05:40.961] <TB0> INFO: TBM Core alpha (0): 7 registers set
[15:05:40.961] <TB0> INFO: TBM Core beta (1): 7 registers set
[15:05:40.961] <TB0> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[15:05:40.961] <TB0> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.961] <TB0> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.961] <TB0> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.961] <TB0> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.961] <TB0> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.961] <TB0> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.961] <TB0> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.961] <TB0> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.961] <TB0> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.961] <TB0> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.961] <TB0> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.962] <TB0> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.962] <TB0> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.962] <TB0> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.962] <TB0> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:40.962] <TB0> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[15:05:41.362] <TB0> INFO: enter 'restricted' command line mode
[15:05:41.362] <TB0> INFO: enter test to run
[15:05:41.362] <TB0> INFO: test: delay setting parameters: ->5<-
[15:05:41.362] <TB0> INFO: delay test by 5 seconds...
[15:05:46.363] <TB0> INFO: enter test to run
[15:05:46.363] <TB0> INFO: test: Xray no parameter change
[15:05:46.363] <TB0> INFO: running: xray
[15:05:46.363] <TB0> INFO: readGainPedestalParameters /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//003_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//003_HRData_50//phCalibrationFitErr35_C15.dat
[15:05:46.490] <TB0> INFO: ######################################################################
[15:05:46.490] <TB0> INFO: PixTestXray::doTest()
[15:05:46.490] <TB0> INFO: ######################################################################
[15:05:46.490] <TB0> INFO: ----------------------------------------------------------------------
[15:05:46.490] <TB0> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[15:05:46.490] <TB0> INFO: ----------------------------------------------------------------------
[15:05:47.457] <TB0> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[15:05:54.081] <TB0> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[15:06:29.017] <TB0> INFO: Resuming triggers.
[15:06:35.645] <TB0> INFO: run duration 13 seconds, buffer almost full (81%), pausing triggers.
[15:07:10.074] <TB0> INFO: Resuming triggers.
[15:07:16.695] <TB0> INFO: run duration 19 seconds, buffer almost full (81%), pausing triggers.
[15:07:51.534] <TB0> INFO: Resuming triggers.
[15:07:58.155] <TB0> INFO: run duration 26 seconds, buffer almost full (81%), pausing triggers.
[15:08:32.065] <TB0> INFO: Resuming triggers.
[15:08:38.691] <TB0> INFO: run duration 33 seconds, buffer almost full (81%), pausing triggers.
[15:09:12.935] <TB0> INFO: Resuming triggers.
[15:09:19.556] <TB0> INFO: run duration 39 seconds, buffer almost full (81%), pausing triggers.
[15:09:54.251] <TB0> INFO: Resuming triggers.
[15:10:00.871] <TB0> INFO: run duration 46 seconds, buffer almost full (81%), pausing triggers.
[15:10:36.335] <TB0> INFO: Resuming triggers.
[15:10:42.959] <TB0> INFO: run duration 52 seconds, buffer almost full (81%), pausing triggers.
[15:11:17.655] <TB0> INFO: Resuming triggers.
[15:11:24.283] <TB0> INFO: run duration 59 seconds, buffer almost full (81%), pausing triggers.
[15:11:59.010] <TB0> INFO: Resuming triggers.
[15:12:05.630] <TB0> INFO: run duration 66 seconds, buffer almost full (81%), pausing triggers.
[15:12:39.824] <TB0> INFO: Resuming triggers.
[15:12:46.444] <TB0> INFO: run duration 72 seconds, buffer almost full (81%), pausing triggers.
[15:13:19.944] <TB0> INFO: Resuming triggers.
[15:13:26.565] <TB0> INFO: run duration 79 seconds, buffer almost full (81%), pausing triggers.
[15:14:01.559] <TB0> INFO: Resuming triggers.
[15:14:08.181] <TB0> INFO: run duration 86 seconds, buffer almost full (81%), pausing triggers.
[15:14:43.316] <TB0> INFO: Resuming triggers.
[15:14:49.935] <TB0> INFO: run duration 92 seconds, buffer almost full (81%), pausing triggers.
[15:15:24.634] <TB0> INFO: Resuming triggers.
[15:15:31.251] <TB0> INFO: run duration 99 seconds, buffer almost full (81%), pausing triggers.
[15:16:05.788] <TB0> INFO: Resuming triggers.
[15:16:06.553] <TB0> INFO: data taking finished, elapsed time: 100 seconds.
[15:16:11.041] <TB0> INFO: PixTest:: pg_setup set to default.
[15:16:11.043] <TB0> INFO: PixTestXray::doPhRun() done
[15:16:11.043] <TB0> INFO: PixTestXray::doTest() done
[15:16:11.240] <TB0> INFO: enter test to run
[15:16:11.240] <TB0> INFO: test: no parameter change
[15:16:11.432] <TB0> QUIET: Connection to board 83 closed.
[15:16:11.512] <TB0> INFO: pXar: this is the end, my friend
commander_HRData.log
[15:16:48.404] <TB0> INFO: *** Welcome to pxar ***
[15:16:48.404] <TB0> INFO: *** Today: 2015/09/11
[15:16:48.404] <TB0> INFO: readRocDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//004_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//004_HRData_150//dacParameters35_C15.dat
[15:16:48.405] <TB0> INFO: readTbmDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//004_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//004_HRData_150//tbmParameters_C0b.dat
[15:16:48.405] <TB0> INFO: readMaskFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//004_HRData_150//defaultMaskFile.dat
[15:16:48.405] <TB0> INFO: readTrimFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//004_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//004_HRData_150//trimParameters35_C15.dat
[15:16:48.475] <TB0> INFO: clk: 4
[15:16:48.475] <TB0> INFO: ctr: 4
[15:16:48.475] <TB0> INFO: sda: 19
[15:16:48.475] <TB0> INFO: tin: 9
[15:16:48.475] <TB0> INFO: level: 15
[15:16:48.475] <TB0> INFO: triggerdelay: 0
[15:16:48.475] <TB0> QUIET: Instanciating API for pxar prod-10+24~g09f6d2c
[15:16:48.475] <TB0> INFO: Log level: INFO
[15:16:48.507] <TB0> INFO: Found DTB DTB_WS6UZO
[15:16:48.516] <TB0> QUIET: Connection to board DTB_WS6UZO opened.
[15:16:48.519] <TB0> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 83
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WS6UZO
MAC address: 40D855118053
Hostname: pixelDTB083
Comment:
------------------------------------------------------
[15:16:48.521] <TB0> INFO: RPC call hashes of host and DTB match: 398089610
[15:16:50.035] <TB0> INFO: DUT info:
[15:16:50.035] <TB0> INFO: The DUT currently contains the following objects:
[15:16:50.035] <TB0> INFO: 2 TBM Cores tbm09c (2 ON)
[15:16:50.035] <TB0> INFO: TBM Core alpha (0): 7 registers set
[15:16:50.035] <TB0> INFO: TBM Core beta (1): 7 registers set
[15:16:50.035] <TB0> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[15:16:50.035] <TB0> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.035] <TB0> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.035] <TB0> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.035] <TB0> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.035] <TB0> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.035] <TB0> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.035] <TB0> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.035] <TB0> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.035] <TB0> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.035] <TB0> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.035] <TB0> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.035] <TB0> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.035] <TB0> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.036] <TB0> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.036] <TB0> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.036] <TB0> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:50.436] <TB0> INFO: enter 'restricted' command line mode
[15:16:50.436] <TB0> INFO: enter test to run
[15:16:50.436] <TB0> INFO: test: delay setting parameters: ->5<-
[15:16:50.436] <TB0> INFO: delay test by 5 seconds...
[15:16:55.436] <TB0> INFO: enter test to run
[15:16:55.436] <TB0> INFO: test: Xray no parameter change
[15:16:55.436] <TB0> INFO: running: xray
[15:16:55.437] <TB0> INFO: readGainPedestalParameters /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//004_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//004_HRData_150//phCalibrationFitErr35_C15.dat
[15:16:55.568] <TB0> INFO: ######################################################################
[15:16:55.568] <TB0> INFO: PixTestXray::doTest()
[15:16:55.568] <TB0> INFO: ######################################################################
[15:16:55.568] <TB0> INFO: ----------------------------------------------------------------------
[15:16:55.568] <TB0> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[15:16:55.568] <TB0> INFO: ----------------------------------------------------------------------
[15:16:56.535] <TB0> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[15:17:00.160] <TB0> INFO: run duration 3 seconds, buffer almost full (81%), pausing triggers.
[15:17:35.838] <TB0> INFO: Resuming triggers.
[15:17:39.471] <TB0> INFO: run duration 7 seconds, buffer almost full (81%), pausing triggers.
[15:18:12.876] <TB0> INFO: Resuming triggers.
[15:18:16.506] <TB0> INFO: run duration 10 seconds, buffer almost full (81%), pausing triggers.
[15:18:49.824] <TB0> INFO: Resuming triggers.
[15:18:53.456] <TB0> INFO: run duration 14 seconds, buffer almost full (81%), pausing triggers.
[15:19:26.833] <TB0> INFO: Resuming triggers.
[15:19:30.465] <TB0> INFO: run duration 18 seconds, buffer almost full (81%), pausing triggers.
[15:20:04.076] <TB0> INFO: Resuming triggers.
[15:20:07.707] <TB0> INFO: run duration 21 seconds, buffer almost full (81%), pausing triggers.
[15:20:43.906] <TB0> INFO: Resuming triggers.
[15:20:47.539] <TB0> INFO: run duration 25 seconds, buffer almost full (81%), pausing triggers.
[15:20:51.436] <TB0> WARNING: Channel 0 ROC 3: Readback start marker after 13 readouts!

[15:20:51.436] <TB0> WARNING: Channel 0 ROC 3: Readback start marker after 3 readouts!

[15:20:51.455] <TB0> ERROR: <datapipe.cc/Read:L164> Dumping the flawed event +- 3 events:

[15:20:51.455] <TB0> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a0e2 8000 4e38 14c 2a4f 682 2647 4e38 4e39 4e39 25b 2483 40b 224f 6cc 2269 fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff e000 c000

[15:20:51.455] <TB0> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a0dc 80b1 4e38 4e38 4e38 4e3b 2f4f 499 286a 499 2a4f 49c 2a45 4e38 2d4 2080 45d 286a fff 2fff fff 2fff fff 2fff e000 c000

[15:20:51.456] <TB0> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a0dd 80c0 4e38 4e38 4e38 118 2641 158 2444 4e38 fff 2fff fff 2fff fff 2fff fff 2fff e000 c000

[15:20:51.456] <TB0> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a0de 8000 4e38 45c 2626 71a 2a49 4e38 88 2042 4e38 58 2845 2a0 222f 4e38 d 2080 113 2a6d 4a2 2687 80d 2483 e000 c000

[15:20:51.456] <TB0> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a0df 8040 4e3a 618 2247 4e3a 640 2629 4e3a 2e2 204b 4e3a fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff e000 c000

[15:20:51.456] <TB0> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a0e0 80b1 4e38 15a 204d 4e38 158 2044 20b 286d 4e38 654 224d 4e38 220 204e 644 228a fff 2fff e000 c000

[15:20:51.456] <TB0> ERROR: <datapipe.cc/Read:L166> ====== 0 ====== a0e1 80c0 4e38 31d 2840 450 2825 4e38 743 2069 4e38 549 226c 4e38 4ca 244f fff 2fff fff 2fff fff 2fff fff 2fff fff 2fff e000 c000

[15:21:23.843] <TB0> INFO: Resuming triggers.
[15:21:27.473] <TB0> INFO: run duration 29 seconds, buffer almost full (81%), pausing triggers.
[15:22:02.348] <TB0> INFO: Resuming triggers.
[15:22:05.979] <TB0> INFO: run duration 32 seconds, buffer almost full (81%), pausing triggers.
[15:22:41.105] <TB0> INFO: Resuming triggers.
[15:22:44.737] <TB0> INFO: run duration 36 seconds, buffer almost full (81%), pausing triggers.
[15:23:19.981] <TB0> INFO: Resuming triggers.
[15:23:23.612] <TB0> INFO: run duration 39 seconds, buffer almost full (81%), pausing triggers.
[15:23:58.695] <TB0> INFO: Resuming triggers.
[15:24:02.326] <TB0> INFO: run duration 43 seconds, buffer almost full (81%), pausing triggers.
[15:24:37.934] <TB0> INFO: Resuming triggers.
[15:24:41.563] <TB0> INFO: run duration 47 seconds, buffer almost full (81%), pausing triggers.
[15:25:18.434] <TB0> INFO: Resuming triggers.
[15:25:22.063] <TB0> INFO: run duration 50 seconds, buffer almost full (81%), pausing triggers.
[15:25:57.917] <TB0> INFO: Resuming triggers.
[15:26:01.551] <TB0> INFO: run duration 54 seconds, buffer almost full (81%), pausing triggers.
[15:26:36.791] <TB0> INFO: Resuming triggers.
[15:26:40.423] <TB0> INFO: run duration 58 seconds, buffer almost full (81%), pausing triggers.
[15:27:16.514] <TB0> INFO: Resuming triggers.
[15:27:20.143] <TB0> INFO: run duration 61 seconds, buffer almost full (81%), pausing triggers.
[15:27:55.641] <TB0> INFO: Resuming triggers.
[15:27:59.271] <TB0> INFO: run duration 65 seconds, buffer almost full (81%), pausing triggers.
[15:28:34.817] <TB0> INFO: Resuming triggers.
[15:28:38.446] <TB0> INFO: run duration 68 seconds, buffer almost full (81%), pausing triggers.
[15:29:15.560] <TB0> INFO: Resuming triggers.
[15:29:19.189] <TB0> INFO: run duration 72 seconds, buffer almost full (81%), pausing triggers.
[15:29:55.114] <TB0> INFO: Resuming triggers.
[15:29:58.744] <TB0> INFO: run duration 76 seconds, buffer almost full (81%), pausing triggers.
[15:30:34.156] <TB0> INFO: Resuming triggers.
[15:30:37.784] <TB0> INFO: run duration 79 seconds, buffer almost full (81%), pausing triggers.
[15:31:13.731] <TB0> INFO: Resuming triggers.
[15:31:17.362] <TB0> INFO: run duration 83 seconds, buffer almost full (81%), pausing triggers.
[15:31:52.390] <TB0> INFO: Resuming triggers.
[15:31:56.021] <TB0> INFO: run duration 87 seconds, buffer almost full (81%), pausing triggers.
[15:32:30.629] <TB0> INFO: Resuming triggers.
[15:32:34.258] <TB0> INFO: run duration 90 seconds, buffer almost full (81%), pausing triggers.
[15:33:10.382] <TB0> INFO: Resuming triggers.
[15:33:14.009] <TB0> INFO: run duration 94 seconds, buffer almost full (81%), pausing triggers.
[15:33:49.975] <TB0> INFO: Resuming triggers.
[15:33:53.600] <TB0> INFO: run duration 97 seconds, buffer almost full (81%), pausing triggers.
[15:34:28.347] <TB0> INFO: Resuming triggers.
[15:34:30.423] <TB0> INFO: data taking finished, elapsed time: 100 seconds.
[15:34:51.774] <TB0> INFO: PixTest:: pg_setup set to default.
[15:34:51.776] <TB0> INFO: PixTestXray::doPhRun() done
[15:34:51.776] <TB0> INFO: PixTestXray::doTest() done
[15:34:51.959] <TB0> INFO: enter test to run
[15:34:51.959] <TB0> INFO: test: no parameter change
[15:34:52.187] <TB0> QUIET: Connection to board 83 closed.
[15:34:52.269] <TB0> INFO: pXar: this is the end, my friend
commander_HRSCurves.log
[15:36:22.574] <TB0> INFO: *** Welcome to pxar ***
[15:36:22.574] <TB0> INFO: *** Today: 2015/09/11
[15:36:22.574] <TB0> INFO: readRocDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//005_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//005_HRSCurves_100//dacParameters35_C15.dat
[15:36:22.575] <TB0> INFO: readTbmDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//005_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//005_HRSCurves_100//tbmParameters_C0b.dat
[15:36:22.575] <TB0> INFO: readMaskFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//005_HRSCurves_100//defaultMaskFile.dat
[15:36:22.575] <TB0> INFO: readTrimFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//005_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//005_HRSCurves_100//trimParameters35_C15.dat
[15:36:22.651] <TB0> INFO: clk: 4
[15:36:22.651] <TB0> INFO: ctr: 4
[15:36:22.651] <TB0> INFO: sda: 19
[15:36:22.651] <TB0> INFO: tin: 9
[15:36:22.651] <TB0> INFO: level: 15
[15:36:22.651] <TB0> INFO: triggerdelay: 0
[15:36:22.651] <TB0> QUIET: Instanciating API for pxar prod-10+24~g09f6d2c
[15:36:22.651] <TB0> INFO: Log level: INFO
[15:36:22.663] <TB0> INFO: Found DTB DTB_WS6UZO
[15:36:22.672] <TB0> QUIET: Connection to board DTB_WS6UZO opened.
[15:36:22.675] <TB0> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 83
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WS6UZO
MAC address: 40D855118053
Hostname: pixelDTB083
Comment:
------------------------------------------------------
[15:36:22.677] <TB0> INFO: RPC call hashes of host and DTB match: 398089610
[15:36:24.186] <TB0> INFO: DUT info:
[15:36:24.186] <TB0> INFO: The DUT currently contains the following objects:
[15:36:24.186] <TB0> INFO: 2 TBM Cores tbm09c (2 ON)
[15:36:24.186] <TB0> INFO: TBM Core alpha (0): 7 registers set
[15:36:24.186] <TB0> INFO: TBM Core beta (1): 7 registers set
[15:36:24.186] <TB0> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[15:36:24.186] <TB0> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.186] <TB0> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[15:36:24.587] <TB0> INFO: enter 'restricted' command line mode
[15:36:24.587] <TB0> INFO: enter test to run
[15:36:24.587] <TB0> INFO: test: Highrate no parameter change
[15:36:24.587] <TB0> INFO: running: highrate
[15:36:24.587] <TB0> INFO: readGainPedestalParameters /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//005_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//005_HRSCurves_100//phCalibrationFitErr35_C15.dat
[15:36:24.719] <TB0> INFO: ----------------------------------------------------------------------
[15:36:24.719] <TB0> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[15:36:24.719] <TB0> INFO: ----------------------------------------------------------------------
[15:36:24.725] <TB0> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 15 .. 75 (20/-1) hits flags = 896 (plus default)
[15:36:24.735] <TB0> INFO: dacScan step from 15 .. 34
[15:36:24.735] <TB0> INFO: dacScan split into 1 runs with ntrig = 50
[15:36:24.735] <TB0> INFO: run 1 of 1
[15:36:25.328] <TB0> INFO: Expecting 4160000 events.
[15:37:03.662] <TB0> INFO: 453650 events read in total (37804ms).
[15:37:40.818] <TB0> INFO: 908250 events read in total (74960ms).
[15:38:18.413] <TB0> INFO: 1362700 events read in total (112555ms).
[15:38:54.936] <TB0> INFO: 1817350 events read in total (149078ms).
[15:39:30.891] <TB0> INFO: 2271950 events read in total (185033ms).
[15:40:07.159] <TB0> INFO: 2726100 events read in total (221301ms).
[15:40:43.676] <TB0> INFO: 3179850 events read in total (257818ms).
[15:41:20.171] <TB0> INFO: 3633400 events read in total (294313ms).
[15:41:55.434] <TB0> INFO: 4086450 events read in total (329576ms).
[15:42:01.887] <TB0> INFO: 4160000 events read in total (336029ms).
[15:42:02.158] <TB0> INFO: Test took 337422ms.
[15:42:06.011] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[15:42:10.852] <TB0> INFO: dacScan step from 35 .. 54
[15:42:10.852] <TB0> INFO: dacScan split into 1 runs with ntrig = 50
[15:42:10.852] <TB0> INFO: run 1 of 1
[15:42:11.466] <TB0> INFO: Expecting 4160000 events.
[15:42:46.808] <TB0> INFO: 373400 events read in total (34815ms).
[15:43:23.332] <TB0> INFO: 747750 events read in total (71339ms).
[15:43:59.728] <TB0> INFO: 1121250 events read in total (107735ms).
[15:44:36.265] <TB0> INFO: 1493850 events read in total (144272ms).
[15:45:12.604] <TB0> INFO: 1865300 events read in total (180611ms).
[15:45:48.450] <TB0> INFO: 2234950 events read in total (216457ms).
[15:46:23.903] <TB0> INFO: 2602650 events read in total (251910ms).
[15:46:58.348] <TB0> INFO: 2967500 events read in total (286355ms).
[15:47:33.743] <TB0> INFO: 3329650 events read in total (321750ms).
[15:48:07.412] <TB0> INFO: 3690200 events read in total (355419ms).
[15:48:41.282] <TB0> INFO: 4049550 events read in total (389289ms).
[15:48:52.358] <TB0> INFO: 4160000 events read in total (400365ms).
[15:48:52.662] <TB0> INFO: Test took 401810ms.
[15:48:54.285] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[15:48:59.519] <TB0> INFO: dacScan step from 55 .. 74
[15:48:59.519] <TB0> INFO: dacScan split into 1 runs with ntrig = 50
[15:48:59.519] <TB0> INFO: run 1 of 1
[15:49:00.136] <TB0> INFO: Expecting 4160000 events.
[15:49:35.908] <TB0> INFO: 337100 events read in total (35245ms).
[15:50:07.456] <TB0> INFO: 674800 events read in total (66793ms).
[15:50:44.166] <TB0> INFO: 1012300 events read in total (103503ms).
[15:51:20.712] <TB0> INFO: 1349900 events read in total (140049ms).
[15:51:56.316] <TB0> INFO: 1687450 events read in total (175653ms).
[15:52:32.855] <TB0> INFO: 2025000 events read in total (212192ms).
[15:53:09.756] <TB0> INFO: 2362800 events read in total (249093ms).
[15:53:45.806] <TB0> INFO: 2700250 events read in total (285143ms).
[15:54:20.717] <TB0> INFO: 3037550 events read in total (320054ms).
[15:54:53.947] <TB0> INFO: 3375100 events read in total (353284ms).
[15:55:27.302] <TB0> INFO: 3712400 events read in total (386639ms).
[15:56:03.895] <TB0> INFO: 4049450 events read in total (423232ms).
[15:56:13.872] <TB0> INFO: 4160000 events read in total (433209ms).
[15:56:14.054] <TB0> INFO: Test took 434535ms.
[15:56:15.628] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[15:56:20.385] <TB0> INFO: dacScan step from 75 .. 75
[15:56:20.385] <TB0> INFO: dacScan split into 1 runs with ntrig = 50
[15:56:20.385] <TB0> INFO: run 1 of 1
[15:56:20.980] <TB0> INFO: Expecting 208000 events.
[15:56:45.249] <TB0> INFO: 208000 events read in total (23741ms).
[15:56:45.258] <TB0> INFO: Test took 24873ms.
[15:56:45.339] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[15:56:45.581] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:56:46.698] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:56:47.790] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:56:48.870] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:56:49.941] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:56:50.991] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:56:52.055] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:56:53.108] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:56:54.165] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:56:55.248] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:56:56.336] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:56:57.418] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:56:58.473] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:56:59.531] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:57:00.557] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:57:01.592] <TB0> INFO: dumping ASCII scurve output file: XSCurveData
[15:57:02.635] <TB0> INFO: PixTest:: pg_setup set to default.
[15:57:02.637] <TB0> INFO: vcal mean: 37.07 37.54 36.64 40.11 41.10 41.75 41.80 41.19 40.71 40.90 41.12 39.49 38.87 36.79 37.45 37.26
[15:57:02.637] <TB0> INFO: vcal RMS: 1.25 1.33 1.10 1.63 1.61 1.58 1.70 1.75 1.65 1.61 1.56 1.58 1.50 1.36 1.15 1.18
[15:57:02.637] <TB0> INFO: number of X-ray hits detected: 184308 195492 183569 329486 343130 393567 401860 388136 347851 356414 341309 294801 285059 152914 158969 165891
[15:57:02.637] <TB0> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[15:57:02.637] <TB0> INFO: X-ray hit rate [MHz/cm2]: 54.0 57.3 53.8 96.6 100.6 115.4 117.8 113.8 102.0 104.5 100.0 86.4 83.6 44.8 46.6 48.6
[15:57:02.637] <TB0> INFO: PixTestHighRate::doXNoiseMaps() done
[15:57:02.753] <TB0> INFO: enter test to run
[15:57:02.753] <TB0> INFO: test: no parameter change
[15:57:02.979] <TB0> QUIET: Connection to board 83 closed.
[15:57:03.092] <TB0> INFO: pXar: this is the end, my friend
commander_CalDelScanAndSaveDacs.log
[16:17:59.891] <TB0> INFO: *** Welcome to pxar ***
[16:17:59.891] <TB0> INFO: *** Today: 2015/09/11
[16:17:59.891] <TB0> INFO: readRocDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[16:17:59.891] <TB0> INFO: readTbmDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[16:17:59.891] <TB0> INFO: readMaskFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[16:17:59.891] <TB0> INFO: readTrimFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[16:17:59.959] <TB0> INFO: clk: 4
[16:17:59.959] <TB0> INFO: ctr: 4
[16:17:59.959] <TB0> INFO: sda: 19
[16:17:59.959] <TB0> INFO: tin: 9
[16:17:59.959] <TB0> INFO: level: 15
[16:17:59.959] <TB0> INFO: triggerdelay: 0
[16:17:59.959] <TB0> QUIET: Instanciating API for pxar prod-10+24~g09f6d2c
[16:17:59.959] <TB0> INFO: Log level: INFO
[16:17:59.972] <TB0> INFO: Found DTB DTB_WS6UZO
[16:17:59.980] <TB0> QUIET: Connection to board DTB_WS6UZO opened.
[16:17:59.983] <TB0> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 83
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WS6UZO
MAC address: 40D855118053
Hostname: pixelDTB083
Comment:
------------------------------------------------------
[16:17:59.986] <TB0> INFO: RPC call hashes of host and DTB match: 398089610
[16:18:01.498] <TB0> INFO: DUT info:
[16:18:01.498] <TB0> INFO: The DUT currently contains the following objects:
[16:18:01.498] <TB0> INFO: 2 TBM Cores tbm09c (2 ON)
[16:18:01.498] <TB0> INFO: TBM Core alpha (0): 7 registers set
[16:18:01.498] <TB0> INFO: TBM Core beta (1): 7 registers set
[16:18:01.498] <TB0> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:18:01.498] <TB0> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.498] <TB0> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:18:01.899] <TB0> INFO: enter 'restricted' command line mode
[16:18:01.899] <TB0> INFO: enter test to run
[16:18:01.899] <TB0> INFO: test: HighRate no parameter change
[16:18:01.899] <TB0> INFO: running: highrate
[16:18:01.899] <TB0> INFO: readGainPedestalParameters /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[16:18:02.027] <TB0> INFO: ----------------------------------------------------------------------
[16:18:02.027] <TB0> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[16:18:02.027] <TB0> INFO: ----------------------------------------------------------------------
[16:18:02.165] <TB0> INFO: Expecting 768 events.
[16:18:03.393] <TB0> INFO: 768 events read in total (510ms).
[16:18:03.488] <TB0> INFO: Test took 1456ms.
[16:18:04.103] <TB0> INFO: Expecting 41600 events.
[16:18:07.509] <TB0> INFO: 41600 events read in total (2879ms).
[16:18:07.510] <TB0> INFO: Test took 4019ms.
[16:18:07.579] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:18:08.217] <TB0> INFO: Expecting 41600 events.
[16:18:12.317] <TB0> INFO: 41600 events read in total (3573ms).
[16:18:12.319] <TB0> INFO: Test took 4714ms.
[16:18:12.391] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:18:13.040] <TB0> INFO: Expecting 41600 events.
[16:18:17.708] <TB0> INFO: 41600 events read in total (4141ms).
[16:18:17.710] <TB0> INFO: Test took 5282ms.
[16:18:17.782] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:18:18.421] <TB0> INFO: Expecting 41600 events.
[16:18:23.267] <TB0> INFO: 41600 events read in total (4319ms).
[16:18:23.268] <TB0> INFO: Test took 5459ms.
[16:18:23.341] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:18:23.980] <TB0> INFO: Expecting 41600 events.
[16:18:28.545] <TB0> INFO: 41600 events read in total (4037ms).
[16:18:28.546] <TB0> INFO: Test took 5178ms.
[16:18:28.619] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:18:29.258] <TB0> INFO: Expecting 41600 events.
[16:18:33.621] <TB0> INFO: 41600 events read in total (3836ms).
[16:18:33.623] <TB0> INFO: Test took 4977ms.
[16:18:33.697] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:18:34.337] <TB0> INFO: Expecting 41600 events.
[16:18:38.812] <TB0> INFO: 41600 events read in total (3948ms).
[16:18:38.813] <TB0> INFO: Test took 5088ms.
[16:18:38.887] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:18:39.525] <TB0> INFO: Expecting 41600 events.
[16:18:44.084] <TB0> INFO: 41600 events read in total (4031ms).
[16:18:44.086] <TB0> INFO: Test took 5173ms.
[16:18:44.164] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:18:44.804] <TB0> INFO: Expecting 41600 events.
[16:18:49.217] <TB0> INFO: 41600 events read in total (3886ms).
[16:18:49.219] <TB0> INFO: Test took 5027ms.
[16:18:49.294] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:18:49.934] <TB0> INFO: Expecting 41600 events.
[16:18:54.360] <TB0> INFO: 41600 events read in total (3899ms).
[16:18:54.362] <TB0> INFO: Test took 5040ms.
[16:18:54.443] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:18:55.102] <TB0> INFO: Expecting 41600 events.
[16:18:59.398] <TB0> INFO: 41600 events read in total (3769ms).
[16:18:59.400] <TB0> INFO: Test took 4924ms.
[16:18:59.482] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:19:00.125] <TB0> INFO: Expecting 41600 events.
[16:19:04.602] <TB0> INFO: 41600 events read in total (3950ms).
[16:19:04.604] <TB0> INFO: Test took 5091ms.
[16:19:04.681] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:19:05.322] <TB0> INFO: Expecting 41600 events.
[16:19:09.724] <TB0> INFO: 41600 events read in total (3875ms).
[16:19:09.725] <TB0> INFO: Test took 5018ms.
[16:19:09.805] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:19:10.453] <TB0> INFO: Expecting 41600 events.
[16:19:14.754] <TB0> INFO: 41600 events read in total (3774ms).
[16:19:14.755] <TB0> INFO: Test took 4917ms.
[16:19:14.834] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:19:15.488] <TB0> INFO: Expecting 41600 events.
[16:19:20.043] <TB0> INFO: 41600 events read in total (4028ms).
[16:19:20.044] <TB0> INFO: Test took 5177ms.
[16:19:20.116] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:19:20.755] <TB0> INFO: Expecting 41600 events.
[16:19:25.233] <TB0> INFO: 41600 events read in total (3951ms).
[16:19:25.235] <TB0> INFO: Test took 5092ms.
[16:19:25.308] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:19:25.947] <TB0> INFO: Expecting 41600 events.
[16:19:30.055] <TB0> INFO: 41600 events read in total (3580ms).
[16:19:30.057] <TB0> INFO: Test took 4722ms.
[16:19:30.133] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:19:30.773] <TB0> INFO: Expecting 41600 events.
[16:19:35.077] <TB0> INFO: 41600 events read in total (3776ms).
[16:19:35.078] <TB0> INFO: Test took 4916ms.
[16:19:35.150] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:19:35.790] <TB0> INFO: Expecting 41600 events.
[16:19:39.831] <TB0> INFO: 41600 events read in total (3514ms).
[16:19:39.833] <TB0> INFO: Test took 4655ms.
[16:19:39.911] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:19:40.555] <TB0> INFO: Expecting 41600 events.
[16:19:44.744] <TB0> INFO: 41600 events read in total (3662ms).
[16:19:44.746] <TB0> INFO: Test took 4803ms.
[16:19:44.840] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:19:45.163] <TB0> INFO: enter test to run
[16:19:45.164] <TB0> INFO: test: Pretest no parameter change
[16:19:45.164] <TB0> INFO: running: pretest
[16:19:45.165] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[16:19:45.165] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[16:19:45.165] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[16:19:45.165] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[16:19:45.165] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[16:19:45.165] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[16:19:45.165] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[16:19:45.165] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[16:19:45.165] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[16:19:45.165] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[16:19:45.165] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[16:19:45.165] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[16:19:45.166] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[16:19:45.166] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[16:19:45.166] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[16:19:45.166] <TB0> INFO: write dac parameters into /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[16:19:45.166] <TB0> INFO: enter test to run
[16:19:45.166] <TB0> INFO: test: no parameter change
[16:19:45.359] <TB0> QUIET: Connection to board 83 closed.
[16:19:45.439] <TB0> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[16:20:15.984] <TB0> INFO: *** Welcome to pxar ***
[16:20:15.984] <TB0> INFO: *** Today: 2015/09/11
[16:20:15.984] <TB0> INFO: readRocDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//011_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//011_HREfficiency_50//dacParameters35_C15.dat
[16:20:15.985] <TB0> INFO: readTbmDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//011_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//011_HREfficiency_50//tbmParameters_C0b.dat
[16:20:15.985] <TB0> INFO: readMaskFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//011_HREfficiency_50//defaultMaskFile.dat
[16:20:15.985] <TB0> INFO: readTrimFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//011_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//011_HREfficiency_50//trimParameters35_C15.dat
[16:20:16.055] <TB0> INFO: clk: 4
[16:20:16.055] <TB0> INFO: ctr: 4
[16:20:16.055] <TB0> INFO: sda: 19
[16:20:16.055] <TB0> INFO: tin: 9
[16:20:16.055] <TB0> INFO: level: 15
[16:20:16.055] <TB0> INFO: triggerdelay: 0
[16:20:16.055] <TB0> QUIET: Instanciating API for pxar prod-10+24~g09f6d2c
[16:20:16.055] <TB0> INFO: Log level: INFO
[16:20:16.067] <TB0> INFO: Found DTB DTB_WS6UZO
[16:20:16.075] <TB0> QUIET: Connection to board DTB_WS6UZO opened.
[16:20:16.078] <TB0> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 83
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WS6UZO
MAC address: 40D855118053
Hostname: pixelDTB083
Comment:
------------------------------------------------------
[16:20:16.081] <TB0> INFO: RPC call hashes of host and DTB match: 398089610
[16:20:17.593] <TB0> INFO: DUT info:
[16:20:17.593] <TB0> INFO: The DUT currently contains the following objects:
[16:20:17.593] <TB0> INFO: 2 TBM Cores tbm09c (2 ON)
[16:20:17.593] <TB0> INFO: TBM Core alpha (0): 7 registers set
[16:20:17.593] <TB0> INFO: TBM Core beta (1): 7 registers set
[16:20:17.593] <TB0> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:20:17.593] <TB0> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.593] <TB0> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.593] <TB0> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.593] <TB0> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.593] <TB0> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.593] <TB0> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.593] <TB0> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.593] <TB0> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.593] <TB0> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.593] <TB0> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.593] <TB0> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.593] <TB0> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.594] <TB0> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.594] <TB0> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.594] <TB0> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.594] <TB0> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:17.994] <TB0> INFO: enter 'restricted' command line mode
[16:20:17.994] <TB0> INFO: enter test to run
[16:20:17.994] <TB0> INFO: test: HighRate no parameter change
[16:20:17.994] <TB0> INFO: running: highrate
[16:20:17.995] <TB0> INFO: readGainPedestalParameters /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//011_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//011_HREfficiency_50//phCalibrationFitErr35_C15.dat
[16:20:18.126] <TB0> INFO: ----------------------------------------------------------------------
[16:20:18.126] <TB0> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:20:18.126] <TB0> INFO: ----------------------------------------------------------------------
[16:20:18.723] <TB0> INFO: Expecting 208000 events.
[16:20:34.005] <TB0> INFO: 208000 events read in total (14753ms).
[16:20:34.012] <TB0> INFO: Test took 15880ms.
[16:20:34.276] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:20:34.588] <TB0> INFO: number of dead pixels (per ROC): 0 0 0 0 1 0 0 0 1 0 0 0 1 1 0 0
[16:20:34.588] <TB0> INFO: number of red-efficiency pixels: 124 116 116 197 246 279 358 325 267 316 248 207 195 124 102 107
[16:20:34.588] <TB0> INFO: number of X-ray hits detected: 91627 96140 89222 166343 172814 199211 201262 194870 173425 178511 173527 148051 141960 74044 78141 82603
[16:20:34.588] <TB0> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:20:34.588] <TB0> INFO: number of Vcal hits detected: 207871 207883 207882 207798 207694 207712 207614 207651 207671 207662 207726 207788 207751 207823 207896 207892
[16:20:34.588] <TB0> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 100.0 99.9 99.9 99.9 99.8 99.8 99.9 99.9 99.9 99.9 99.9 99.9 100.0 100.0
[16:20:34.588] <TB0> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.9 99.9 99.9 99.8 99.8 99.8 99.8 99.9 99.9 99.9 99.9 100.0 99.9
[16:20:34.588] <TB0> INFO: X-ray hit rate [MHz/cm2]: 26.9 28.2 26.2 48.8 50.7 58.4 59.0 57.1 50.8 52.3 50.9 43.4 41.6 21.7 22.9 24.2
[16:20:34.588] <TB0> INFO: PixTestHighRate::doXPixelAlive() done
[16:20:34.622] <TB0> INFO: PixTest:: pg_setup set to default.
[16:20:34.678] <TB0> INFO: enter test to run
[16:20:34.678] <TB0> INFO: test: no parameter change
[16:20:34.819] <TB0> QUIET: Connection to board 83 closed.
[16:20:34.898] <TB0> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[16:21:09.591] <TB0> INFO: *** Welcome to pxar ***
[16:21:09.591] <TB0> INFO: *** Today: 2015/09/11
[16:21:09.591] <TB0> INFO: readRocDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//012_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//012_HREfficiency_100//dacParameters35_C15.dat
[16:21:09.592] <TB0> INFO: readTbmDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//012_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//012_HREfficiency_100//tbmParameters_C0b.dat
[16:21:09.592] <TB0> INFO: readMaskFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//012_HREfficiency_100//defaultMaskFile.dat
[16:21:09.592] <TB0> INFO: readTrimFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//012_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//012_HREfficiency_100//trimParameters35_C15.dat
[16:21:09.658] <TB0> INFO: clk: 4
[16:21:09.658] <TB0> INFO: ctr: 4
[16:21:09.658] <TB0> INFO: sda: 19
[16:21:09.658] <TB0> INFO: tin: 9
[16:21:09.658] <TB0> INFO: level: 15
[16:21:09.658] <TB0> INFO: triggerdelay: 0
[16:21:09.658] <TB0> QUIET: Instanciating API for pxar prod-10+24~g09f6d2c
[16:21:09.658] <TB0> INFO: Log level: INFO
[16:21:09.672] <TB0> INFO: Found DTB DTB_WS6UZO
[16:21:09.680] <TB0> QUIET: Connection to board DTB_WS6UZO opened.
[16:21:09.683] <TB0> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 83
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WS6UZO
MAC address: 40D855118053
Hostname: pixelDTB083
Comment:
------------------------------------------------------
[16:21:09.686] <TB0> INFO: RPC call hashes of host and DTB match: 398089610
[16:21:11.198] <TB0> INFO: DUT info:
[16:21:11.198] <TB0> INFO: The DUT currently contains the following objects:
[16:21:11.198] <TB0> INFO: 2 TBM Cores tbm09c (2 ON)
[16:21:11.198] <TB0> INFO: TBM Core alpha (0): 7 registers set
[16:21:11.198] <TB0> INFO: TBM Core beta (1): 7 registers set
[16:21:11.198] <TB0> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:21:11.198] <TB0> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.198] <TB0> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:21:11.599] <TB0> INFO: enter 'restricted' command line mode
[16:21:11.599] <TB0> INFO: enter test to run
[16:21:11.599] <TB0> INFO: test: HighRate no parameter change
[16:21:11.599] <TB0> INFO: running: highrate
[16:21:11.599] <TB0> INFO: readGainPedestalParameters /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//012_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//012_HREfficiency_100//phCalibrationFitErr35_C15.dat
[16:21:11.729] <TB0> INFO: ----------------------------------------------------------------------
[16:21:11.729] <TB0> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:21:11.729] <TB0> INFO: ----------------------------------------------------------------------
[16:21:12.326] <TB0> INFO: Expecting 208000 events.
[16:21:32.040] <TB0> INFO: 208000 events read in total (19185ms).
[16:21:32.048] <TB0> INFO: Test took 20313ms.
[16:21:32.584] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:21:33.038] <TB0> INFO: number of dead pixels (per ROC): 0 0 0 0 1 0 0 0 1 0 0 0 0 1 0 0
[16:21:33.038] <TB0> INFO: number of red-efficiency pixels: 300 299 394 823 848 1146 1248 1154 962 1122 945 728 668 312 278 273
[16:21:33.038] <TB0> INFO: number of X-ray hits detected: 184505 195920 182787 330576 343343 392883 402247 388446 347597 354697 342224 296520 285523 153553 160121 166121
[16:21:33.038] <TB0> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:21:33.038] <TB0> INFO: number of Vcal hits detected: 207688 207681 207508 207025 206877 206479 206262 206566 206783 206589 206807 207135 207201 207598 207709 207716
[16:21:33.038] <TB0> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.8 99.6 99.6 99.4 99.3 99.4 99.5 99.4 99.5 99.6 99.7 99.9 99.9 99.9
[16:21:33.038] <TB0> INFO: Vcal hit overall efficiency (%): 99.9 99.8 99.8 99.5 99.5 99.3 99.2 99.3 99.4 99.3 99.4 99.6 99.6 99.8 99.9 99.9
[16:21:33.038] <TB0> INFO: X-ray hit rate [MHz/cm2]: 54.1 57.4 53.6 96.9 100.6 115.2 117.9 113.9 101.9 104.0 100.3 86.9 83.7 45.0 46.9 48.7
[16:21:33.038] <TB0> INFO: PixTestHighRate::doXPixelAlive() done
[16:21:33.073] <TB0> INFO: PixTest:: pg_setup set to default.
[16:21:33.121] <TB0> INFO: enter test to run
[16:21:33.121] <TB0> INFO: test: no parameter change
[16:21:33.288] <TB0> QUIET: Connection to board 83 closed.
[16:21:33.368] <TB0> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[16:22:06.952] <TB0> INFO: *** Welcome to pxar ***
[16:22:06.952] <TB0> INFO: *** Today: 2015/09/11
[16:22:06.952] <TB0> INFO: readRocDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//013_HREfficiency_150//dacParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//013_HREfficiency_150//dacParameters35_C15.dat
[16:22:06.953] <TB0> INFO: readTbmDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//013_HREfficiency_150//tbmParameters_C0a.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//013_HREfficiency_150//tbmParameters_C0b.dat
[16:22:06.953] <TB0> INFO: readMaskFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//013_HREfficiency_150//defaultMaskFile.dat
[16:22:06.953] <TB0> INFO: readTrimFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//013_HREfficiency_150//trimParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//013_HREfficiency_150//trimParameters35_C15.dat
[16:22:07.020] <TB0> INFO: clk: 4
[16:22:07.020] <TB0> INFO: ctr: 4
[16:22:07.020] <TB0> INFO: sda: 19
[16:22:07.020] <TB0> INFO: tin: 9
[16:22:07.020] <TB0> INFO: level: 15
[16:22:07.020] <TB0> INFO: triggerdelay: 0
[16:22:07.020] <TB0> QUIET: Instanciating API for pxar prod-10+24~g09f6d2c
[16:22:07.020] <TB0> INFO: Log level: INFO
[16:22:07.033] <TB0> INFO: Found DTB DTB_WS6UZO
[16:22:07.041] <TB0> QUIET: Connection to board DTB_WS6UZO opened.
[16:22:07.044] <TB0> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 83
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WS6UZO
MAC address: 40D855118053
Hostname: pixelDTB083
Comment:
------------------------------------------------------
[16:22:07.047] <TB0> INFO: RPC call hashes of host and DTB match: 398089610
[16:22:08.558] <TB0> INFO: DUT info:
[16:22:08.558] <TB0> INFO: The DUT currently contains the following objects:
[16:22:08.558] <TB0> INFO: 2 TBM Cores tbm09c (2 ON)
[16:22:08.558] <TB0> INFO: TBM Core alpha (0): 7 registers set
[16:22:08.558] <TB0> INFO: TBM Core beta (1): 7 registers set
[16:22:08.558] <TB0> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:22:08.558] <TB0> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.558] <TB0> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:22:08.959] <TB0> INFO: enter 'restricted' command line mode
[16:22:08.959] <TB0> INFO: enter test to run
[16:22:08.959] <TB0> INFO: test: HighRate no parameter change
[16:22:08.959] <TB0> INFO: running: highrate
[16:22:08.959] <TB0> INFO: readGainPedestalParameters /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//013_HREfficiency_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//013_HREfficiency_150//phCalibrationFitErr35_C15.dat
[16:22:09.089] <TB0> INFO: ----------------------------------------------------------------------
[16:22:09.089] <TB0> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:22:09.089] <TB0> INFO: ----------------------------------------------------------------------
[16:22:09.685] <TB0> INFO: Expecting 208000 events.
[16:22:34.511] <TB0> INFO: 208000 events read in total (24296ms).
[16:22:34.525] <TB0> INFO: Test took 25430ms.
[16:22:35.277] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:22:35.728] <TB0> INFO: number of dead pixels (per ROC): 0 0 0 0 1 0 0 0 0 0 0 0 1 1 0 0
[16:22:35.728] <TB0> INFO: number of red-efficiency pixels: 636 570 773 1723 1818 2241 2405 2386 1973 2095 1922 1433 1390 543 551 549
[16:22:35.728] <TB0> INFO: number of X-ray hits detected: 266756 283122 265382 475858 492945 561596 581440 557986 502093 514054 488675 425749 412899 223411 233299 240690
[16:22:35.728] <TB0> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:22:35.728] <TB0> INFO: number of Vcal hits detected: 207295 207368 206755 205324 204962 203870 202984 203945 204949 204399 204856 205845 206106 207219 207400 207416
[16:22:35.728] <TB0> INFO: Vcal hit fiducial efficiency (%): 99.7 99.7 99.5 98.9 98.7 98.3 97.9 98.3 98.7 98.5 98.6 99.1 99.2 99.7 99.7 99.7
[16:22:35.728] <TB0> INFO: Vcal hit overall efficiency (%): 99.7 99.7 99.4 98.7 98.5 98.0 97.6 98.1 98.5 98.3 98.5 99.0 99.1 99.6 99.7 99.7
[16:22:35.728] <TB0> INFO: X-ray hit rate [MHz/cm2]: 78.2 83.0 77.8 139.5 144.5 164.6 170.4 163.5 147.2 150.7 143.2 124.8 121.0 65.5 68.4 70.5
[16:22:35.728] <TB0> INFO: PixTestHighRate::doXPixelAlive() done
[16:22:35.759] <TB0> INFO: PixTest:: pg_setup set to default.
[16:22:35.795] <TB0> INFO: enter test to run
[16:22:35.795] <TB0> INFO: test: no parameter change
[16:22:36.838] <TB0> QUIET: Connection to board 83 closed.
[16:22:36.920] <TB0> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[16:23:08.469] <TB0> INFO: *** Welcome to pxar ***
[16:23:08.469] <TB0> INFO: *** Today: 2015/09/11
[16:23:08.469] <TB0> INFO: readRocDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//014_HREfficiency_200//dacParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//014_HREfficiency_200//dacParameters35_C15.dat
[16:23:08.470] <TB0> INFO: readTbmDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//014_HREfficiency_200//tbmParameters_C0a.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//014_HREfficiency_200//tbmParameters_C0b.dat
[16:23:08.470] <TB0> INFO: readMaskFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//014_HREfficiency_200//defaultMaskFile.dat
[16:23:08.470] <TB0> INFO: readTrimFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//014_HREfficiency_200//trimParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//014_HREfficiency_200//trimParameters35_C15.dat
[16:23:08.543] <TB0> INFO: clk: 4
[16:23:08.543] <TB0> INFO: ctr: 4
[16:23:08.543] <TB0> INFO: sda: 19
[16:23:08.543] <TB0> INFO: tin: 9
[16:23:08.543] <TB0> INFO: level: 15
[16:23:08.543] <TB0> INFO: triggerdelay: 0
[16:23:08.543] <TB0> QUIET: Instanciating API for pxar prod-10+24~g09f6d2c
[16:23:08.544] <TB0> INFO: Log level: INFO
[16:23:08.556] <TB0> INFO: Found DTB DTB_WS6UZO
[16:23:08.564] <TB0> QUIET: Connection to board DTB_WS6UZO opened.
[16:23:08.567] <TB0> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 83
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WS6UZO
MAC address: 40D855118053
Hostname: pixelDTB083
Comment:
------------------------------------------------------
[16:23:08.570] <TB0> INFO: RPC call hashes of host and DTB match: 398089610
[16:23:10.081] <TB0> INFO: DUT info:
[16:23:10.081] <TB0> INFO: The DUT currently contains the following objects:
[16:23:10.081] <TB0> INFO: 2 TBM Cores tbm09c (2 ON)
[16:23:10.081] <TB0> INFO: TBM Core alpha (0): 7 registers set
[16:23:10.081] <TB0> INFO: TBM Core beta (1): 7 registers set
[16:23:10.081] <TB0> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:23:10.081] <TB0> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.081] <TB0> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.081] <TB0> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.081] <TB0> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.082] <TB0> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.082] <TB0> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.082] <TB0> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.082] <TB0> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.082] <TB0> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.082] <TB0> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.082] <TB0> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.082] <TB0> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.082] <TB0> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.082] <TB0> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.082] <TB0> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.082] <TB0> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:10.482] <TB0> INFO: enter 'restricted' command line mode
[16:23:10.482] <TB0> INFO: enter test to run
[16:23:10.483] <TB0> INFO: test: HighRate no parameter change
[16:23:10.483] <TB0> INFO: running: highrate
[16:23:10.483] <TB0> INFO: readGainPedestalParameters /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//014_HREfficiency_200//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//014_HREfficiency_200//phCalibrationFitErr35_C15.dat
[16:23:10.616] <TB0> INFO: ----------------------------------------------------------------------
[16:23:10.616] <TB0> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:23:10.616] <TB0> INFO: ----------------------------------------------------------------------
[16:23:11.213] <TB0> INFO: Expecting 208000 events.
[16:23:43.489] <TB0> INFO: 208000 events read in total (31747ms).
[16:23:43.506] <TB0> INFO: Test took 32884ms.
[16:23:44.499] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:23:45.094] <TB0> INFO: number of dead pixels (per ROC): 0 0 0 0 1 0 0 0 1 0 0 0 1 1 0 0
[16:23:45.095] <TB0> INFO: number of red-efficiency pixels: 1156 1155 1241 2862 2890 3446 3590 3634 3212 3215 3018 2398 2418 936 1057 920
[16:23:45.095] <TB0> INFO: number of X-ray hits detected: 359942 383917 364794 640537 663596 752305 785367 754355 681089 691479 655715 574687 557711 304953 317666 327995
[16:23:45.095] <TB0> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:23:45.095] <TB0> INFO: number of Vcal hits detected: 206558 206579 205137 201644 200756 197886 195557 197883 200536 199279 200744 203058 203465 206299 206707 206908
[16:23:45.095] <TB0> INFO: Vcal hit fiducial efficiency (%): 99.4 99.4 98.9 97.3 97.0 95.7 94.8 95.6 96.8 96.3 96.9 98.0 98.1 99.3 99.4 99.5
[16:23:45.095] <TB0> INFO: Vcal hit overall efficiency (%): 99.3 99.3 98.6 96.9 96.5 95.1 94.0 95.1 96.4 95.8 96.5 97.6 97.8 99.2 99.4 99.5
[16:23:45.095] <TB0> INFO: X-ray hit rate [MHz/cm2]: 105.5 112.5 106.9 187.7 194.5 220.5 230.2 221.1 199.6 202.7 192.2 168.4 163.5 89.4 93.1 96.1
[16:23:45.095] <TB0> INFO: PixTestHighRate::doXPixelAlive() done
[16:23:45.129] <TB0> INFO: PixTest:: pg_setup set to default.
[16:23:45.166] <TB0> INFO: enter test to run
[16:23:45.166] <TB0> INFO: test: no parameter change
[16:23:45.315] <TB0> QUIET: Connection to board 83 closed.
[16:23:45.394] <TB0> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[16:24:14.489] <TB0> INFO: *** Welcome to pxar ***
[16:24:14.489] <TB0> INFO: *** Today: 2015/09/11
[16:24:14.489] <TB0> INFO: readRocDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//015_HREfficiency_250//dacParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//015_HREfficiency_250//dacParameters35_C15.dat
[16:24:14.489] <TB0> INFO: readTbmDacs: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//015_HREfficiency_250//tbmParameters_C0a.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//015_HREfficiency_250//tbmParameters_C0b.dat
[16:24:14.489] <TB0> INFO: readMaskFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//015_HREfficiency_250//defaultMaskFile.dat
[16:24:14.489] <TB0> INFO: readTrimFile: /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//015_HREfficiency_250//trimParameters35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//015_HREfficiency_250//trimParameters35_C15.dat
[16:24:14.559] <TB0> INFO: clk: 4
[16:24:14.559] <TB0> INFO: ctr: 4
[16:24:14.559] <TB0> INFO: sda: 19
[16:24:14.559] <TB0> INFO: tin: 9
[16:24:14.559] <TB0> INFO: level: 15
[16:24:14.559] <TB0> INFO: triggerdelay: 0
[16:24:14.559] <TB0> QUIET: Instanciating API for pxar prod-10+24~g09f6d2c
[16:24:14.559] <TB0> INFO: Log level: INFO
[16:24:14.573] <TB0> INFO: Found DTB DTB_WS6UZO
[16:24:14.581] <TB0> QUIET: Connection to board DTB_WS6UZO opened.
[16:24:14.585] <TB0> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 83
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WS6UZO
MAC address: 40D855118053
Hostname: pixelDTB083
Comment:
------------------------------------------------------
[16:24:14.587] <TB0> INFO: RPC call hashes of host and DTB match: 398089610
[16:24:16.098] <TB0> INFO: DUT info:
[16:24:16.098] <TB0> INFO: The DUT currently contains the following objects:
[16:24:16.098] <TB0> INFO: 2 TBM Cores tbm09c (2 ON)
[16:24:16.098] <TB0> INFO: TBM Core alpha (0): 7 registers set
[16:24:16.098] <TB0> INFO: TBM Core beta (1): 7 registers set
[16:24:16.098] <TB0> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:24:16.098] <TB0> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.098] <TB0> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:16.499] <TB0> INFO: enter 'restricted' command line mode
[16:24:16.499] <TB0> INFO: enter test to run
[16:24:16.499] <TB0> INFO: test: HighRate no parameter change
[16:24:16.499] <TB0> INFO: running: highrate
[16:24:16.499] <TB0> INFO: readGainPedestalParameters /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//015_HREfficiency_250//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2034_XrayQualification_2015-09-11_16h58m_1441983510//015_HREfficiency_250//phCalibrationFitErr35_C15.dat
[16:24:16.625] <TB0> INFO: ----------------------------------------------------------------------
[16:24:16.625] <TB0> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:24:16.625] <TB0> INFO: ----------------------------------------------------------------------
[16:24:17.220] <TB0> INFO: Expecting 208000 events.
[16:24:49.161] <TB0> INFO: 208000 events read in total (31412ms).
[16:24:49.179] <TB0> INFO: Test took 32549ms.
[16:24:50.188] <TB0> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:24:50.740] <TB0> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 1 0 0 0 1 1 0 0
[16:24:50.740] <TB0> INFO: number of red-efficiency pixels: 1189 1201 1266 3009 3052 3555 3654 3708 3310 3360 3237 2591 2496 1014 1136 1001
[16:24:50.740] <TB0> INFO: number of X-ray hits detected: 371029 395615 377316 658418 682947 768984 808670 780308 705215 713535 675952 591315 573907 317443 330994 336732
[16:24:50.740] <TB0> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:24:50.740] <TB0> INFO: number of Vcal hits detected: 206513 206506 205030 201099 200106 197069 194601 196834 199857 198478 199848 202631 203219 206165 206613 206800
[16:24:50.740] <TB0> INFO: Vcal hit fiducial efficiency (%): 99.4 99.3 98.9 97.1 96.7 95.3 94.4 95.2 96.4 96.0 96.5 97.8 98.0 99.3 99.4 99.5
[16:24:50.740] <TB0> INFO: Vcal hit overall efficiency (%): 99.3 99.3 98.6 96.7 96.2 94.7 93.6 94.6 96.1 95.4 96.1 97.4 97.7 99.1 99.3 99.4
[16:24:50.740] <TB0> INFO: X-ray hit rate [MHz/cm2]: 108.8 116.0 110.6 193.0 200.2 225.4 237.0 228.7 206.7 209.1 198.1 173.3 168.2 93.0 97.0 98.7
[16:24:50.740] <TB0> INFO: PixTestHighRate::doXPixelAlive() done
[16:24:50.771] <TB0> INFO: PixTest:: pg_setup set to default.
[16:24:50.811] <TB0> INFO: enter test to run
[16:24:50.811] <TB0> INFO: test: no parameter change
[16:24:50.976] <TB0> QUIET: Connection to board 83 closed.
[16:24:51.056] <TB0> INFO: pXar: this is the end, my friend
MoReWeb-v1.0.0-5-g82d9ff6 on branch psi46master