Test Date: 2016-10-05 12:02
Analysis date: 2016-10-05 13:37
Logfile
commander_PixelAlive.log
[10:02:58.824] <TB1> INFO: *** Welcome to pxar ***
[10:02:58.824] <TB1> INFO: *** Today: 2016/10/05
[10:02:59.162] <TB1> INFO: *** Version: f5d3-dirty
[10:02:59.162] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//000_PixelAlive_p17//dacParameters35_C15.dat
[10:02:59.163] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//000_PixelAlive_p17//tbmParameters_C0b.dat
[10:02:59.163] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//000_PixelAlive_p17//defaultMaskFile.dat
[10:02:59.163] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//000_PixelAlive_p17//trimParameters35_C15.dat
[10:02:59.236] <TB1> INFO: clk: 4
[10:02:59.236] <TB1> INFO: ctr: 4
[10:02:59.236] <TB1> INFO: sda: 19
[10:02:59.236] <TB1> INFO: tin: 9
[10:02:59.236] <TB1> INFO: level: 15
[10:02:59.236] <TB1> INFO: triggerdelay: 0
[10:02:59.236] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[10:02:59.236] <TB1> INFO: Log level: INFO
[10:02:59.249] <TB1> INFO: Found DTB DTB_WWXTQT
[10:02:59.259] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:02:59.261] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:02:59.263] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[10:03:00.803] <TB1> INFO: DUT info:
[10:03:00.804] <TB1> INFO: The DUT currently contains the following objects:
[10:03:00.804] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:03:00.804] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:03:00.804] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:03:00.804] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:03:00.804] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:00.804] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:03:01.205] <TB1> INFO: enter 'restricted' command line mode
[10:03:01.205] <TB1> INFO: enter test to run
[10:03:01.205] <TB1> INFO: test: PixelAlive no parameter change
[10:03:01.205] <TB1> INFO: running: pixelalive
[10:03:01.211] <TB1> INFO: ######################################################################
[10:03:01.211] <TB1> INFO: PixTestAlive::doTest()
[10:03:01.211] <TB1> INFO: ######################################################################
[10:03:01.213] <TB1> INFO: ----------------------------------------------------------------------
[10:03:01.213] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:03:01.213] <TB1> INFO: ----------------------------------------------------------------------
[10:03:01.487] <TB1> INFO: Expecting 41600 events.
[10:03:04.747] <TB1> INFO: 41600 events read in total (2702ms).
[10:03:04.787] <TB1> INFO: Test took 3572ms.
[10:03:05.018] <TB1> INFO: PixTestAlive::aliveTest() done
[10:03:05.018] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[10:03:05.019] <TB1> INFO: ----------------------------------------------------------------------
[10:03:05.019] <TB1> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:03:05.019] <TB1> INFO: ----------------------------------------------------------------------
[10:03:05.285] <TB1> INFO: Expecting 41600 events.
[10:03:07.941] <TB1> INFO: 41600 events read in total (2099ms).
[10:03:07.942] <TB1> INFO: Test took 2922ms.
[10:03:07.942] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:03:08.182] <TB1> INFO: PixTestAlive::maskTest() done
[10:03:08.182] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:03:08.183] <TB1> INFO: ----------------------------------------------------------------------
[10:03:08.183] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:03:08.183] <TB1> INFO: ----------------------------------------------------------------------
[10:03:08.438] <TB1> INFO: Expecting 41600 events.
[10:03:11.723] <TB1> INFO: 41600 events read in total (2729ms).
[10:03:11.725] <TB1> INFO: Test took 3540ms.
[10:03:11.950] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[10:03:11.950] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:03:11.950] <TB1> INFO: PixTestAlive::doTest() done, duration: 10 seconds
[10:03:11.982] <TB1> INFO: enter test to run
[10:03:11.982] <TB1> INFO: test: no parameter change
[10:03:12.185] <TB1> QUIET: Connection to board 147 closed.
[10:03:12.264] <TB1> INFO: pXar: this is the end, my friend
commander_RetrimHotPixels.log
[10:08:36.895] <TB1> INFO: *** Welcome to pxar ***
[10:08:36.895] <TB1> INFO: *** Today: 2016/10/05
[10:08:36.961] <TB1> INFO: *** Version: f5d3-dirty
[10:08:36.961] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//dacParameters35_C15.dat
[10:08:36.962] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[10:08:36.962] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//defaultMaskFile.dat
[10:08:36.962] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C15.dat
[10:08:37.033] <TB1> INFO: clk: 4
[10:08:37.033] <TB1> INFO: ctr: 4
[10:08:37.033] <TB1> INFO: sda: 19
[10:08:37.033] <TB1> INFO: tin: 9
[10:08:37.033] <TB1> INFO: level: 15
[10:08:37.033] <TB1> INFO: triggerdelay: 0
[10:08:37.033] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[10:08:37.033] <TB1> INFO: Log level: INFO
[10:08:37.046] <TB1> INFO: Found DTB DTB_WWXTQT
[10:08:37.056] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:08:37.058] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:08:37.060] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[10:08:38.599] <TB1> INFO: DUT info:
[10:08:38.599] <TB1> INFO: The DUT currently contains the following objects:
[10:08:38.599] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:08:38.599] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:08:38.599] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:08:38.599] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:08:38.599] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:39.000] <TB1> INFO: enter 'restricted' command line mode
[10:08:39.000] <TB1> INFO: enter test to run
[10:08:39.000] <TB1> INFO: test: delay setting parameters: ->5<-
[10:08:39.000] <TB1> INFO: delay test by 5 seconds...
[10:08:44.000] <TB1> INFO: enter test to run
[10:08:44.000] <TB1> INFO: test: highrate no parameter change
[10:08:44.000] <TB1> INFO: running: highrate
[10:08:44.001] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[10:08:44.133] <TB1> INFO: ----------------------------------------------------------------------
[10:08:44.133] <TB1> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[10:08:44.133] <TB1> INFO: ----------------------------------------------------------------------
[10:08:44.133] <TB1> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[10:08:44.133] <TB1> INFO: edge/corner pixel THR is adjusted
[10:08:44.133] <TB1> INFO: PixTestHighRate::trimHotPixels: step 0...
[10:08:44.849] <TB1> INFO: Collecting data for 1 seconds...
[10:08:45.851] <TB1> INFO: Done with hot pixel readout
[10:08:50.600] <TB1> INFO: PixTest:: pg_setup set to default.
[10:08:50.601] <TB1> INFO: 0 hot pixels found in step 0
[10:08:50.623] <TB1> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[10:08:50.650] <TB1> INFO: PixTest::trimHotPixels() done
[10:08:50.650] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C0.dat
[10:08:50.660] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C1.dat
[10:08:50.666] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C2.dat
[10:08:50.672] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C3.dat
[10:08:50.679] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C4.dat
[10:08:50.685] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C5.dat
[10:08:50.692] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C6.dat
[10:08:50.698] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C7.dat
[10:08:50.705] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C8.dat
[10:08:50.711] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C9.dat
[10:08:50.718] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C10.dat
[10:08:50.724] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C11.dat
[10:08:50.731] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C12.dat
[10:08:50.737] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C13.dat
[10:08:50.744] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C14.dat
[10:08:50.750] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C15.dat
[10:08:50.757] <TB1> INFO: write masked pixels into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//defaultMaskFile.dat
[10:08:50.788] <TB1> INFO: enter test to run
[10:08:50.788] <TB1> INFO: test: no parameter change
[10:08:51.023] <TB1> QUIET: Connection to board 147 closed.
[10:08:51.103] <TB1> INFO: pXar: this is the end, my friend
commander_RetrimHotPixels.log
[10:08:36.895] <TB1> INFO: *** Welcome to pxar ***
[10:08:36.895] <TB1> INFO: *** Today: 2016/10/05
[10:08:36.961] <TB1> INFO: *** Version: f5d3-dirty
[10:08:36.961] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//dacParameters35_C15.dat
[10:08:36.962] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[10:08:36.962] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//defaultMaskFile.dat
[10:08:36.962] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C15.dat
[10:08:37.033] <TB1> INFO: clk: 4
[10:08:37.033] <TB1> INFO: ctr: 4
[10:08:37.033] <TB1> INFO: sda: 19
[10:08:37.033] <TB1> INFO: tin: 9
[10:08:37.033] <TB1> INFO: level: 15
[10:08:37.033] <TB1> INFO: triggerdelay: 0
[10:08:37.033] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[10:08:37.033] <TB1> INFO: Log level: INFO
[10:08:37.046] <TB1> INFO: Found DTB DTB_WWXTQT
[10:08:37.056] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:08:37.058] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:08:37.060] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[10:08:38.599] <TB1> INFO: DUT info:
[10:08:38.599] <TB1> INFO: The DUT currently contains the following objects:
[10:08:38.599] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:08:38.599] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:08:38.599] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:08:38.599] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:08:38.599] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:38.599] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:08:39.000] <TB1> INFO: enter 'restricted' command line mode
[10:08:39.000] <TB1> INFO: enter test to run
[10:08:39.000] <TB1> INFO: test: delay setting parameters: ->5<-
[10:08:39.000] <TB1> INFO: delay test by 5 seconds...
[10:08:44.000] <TB1> INFO: enter test to run
[10:08:44.000] <TB1> INFO: test: highrate no parameter change
[10:08:44.000] <TB1> INFO: running: highrate
[10:08:44.001] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[10:08:44.133] <TB1> INFO: ----------------------------------------------------------------------
[10:08:44.133] <TB1> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[10:08:44.133] <TB1> INFO: ----------------------------------------------------------------------
[10:08:44.133] <TB1> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[10:08:44.133] <TB1> INFO: edge/corner pixel THR is adjusted
[10:08:44.133] <TB1> INFO: PixTestHighRate::trimHotPixels: step 0...
[10:08:44.849] <TB1> INFO: Collecting data for 1 seconds...
[10:08:45.851] <TB1> INFO: Done with hot pixel readout
[10:08:50.600] <TB1> INFO: PixTest:: pg_setup set to default.
[10:08:50.601] <TB1> INFO: 0 hot pixels found in step 0
[10:08:50.623] <TB1> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[10:08:50.650] <TB1> INFO: PixTest::trimHotPixels() done
[10:08:50.650] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C0.dat
[10:08:50.660] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C1.dat
[10:08:50.666] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C2.dat
[10:08:50.672] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C3.dat
[10:08:50.679] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C4.dat
[10:08:50.685] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C5.dat
[10:08:50.692] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C6.dat
[10:08:50.698] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C7.dat
[10:08:50.705] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C8.dat
[10:08:50.711] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C9.dat
[10:08:50.718] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C10.dat
[10:08:50.724] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C11.dat
[10:08:50.731] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C12.dat
[10:08:50.737] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C13.dat
[10:08:50.744] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C14.dat
[10:08:50.750] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//trimParameters35_C15.dat
[10:08:50.757] <TB1> INFO: write masked pixels into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//002_RetrimHotPixels_150//defaultMaskFile.dat
[10:08:50.788] <TB1> INFO: enter test to run
[10:08:50.788] <TB1> INFO: test: no parameter change
[10:08:51.023] <TB1> QUIET: Connection to board 147 closed.
[10:08:51.103] <TB1> INFO: pXar: this is the end, my friend
[10:09:41.874] <TB1> INFO: *** Welcome to pxar ***
[10:09:41.874] <TB1> INFO: *** Today: 2016/10/05
[10:09:41.945] <TB1> INFO: *** Version: f5d3-dirty
[10:09:41.945] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//dacParameters35_C15.dat
[10:09:41.945] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//tbmParameters_C0b.dat
[10:09:41.945] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//defaultMaskFile.dat
[10:09:41.945] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C15.dat
[10:09:42.017] <TB1> INFO: clk: 4
[10:09:42.017] <TB1> INFO: ctr: 4
[10:09:42.017] <TB1> INFO: sda: 19
[10:09:42.017] <TB1> INFO: tin: 9
[10:09:42.017] <TB1> INFO: level: 15
[10:09:42.017] <TB1> INFO: triggerdelay: 0
[10:09:42.017] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[10:09:42.017] <TB1> INFO: Log level: INFO
[10:09:42.031] <TB1> INFO: Found DTB DTB_WWXTQT
[10:09:42.041] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:09:42.043] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:09:42.045] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[10:09:43.577] <TB1> INFO: DUT info:
[10:09:43.578] <TB1> INFO: The DUT currently contains the following objects:
[10:09:43.578] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:09:43.578] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:09:43.578] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:09:43.578] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:09:43.578] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.578] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:09:43.979] <TB1> INFO: enter 'restricted' command line mode
[10:09:43.979] <TB1> INFO: enter test to run
[10:09:43.979] <TB1> INFO: test: delay setting parameters: ->5<-
[10:09:43.979] <TB1> INFO: delay test by 5 seconds...
[10:09:48.979] <TB1> INFO: enter test to run
[10:09:48.979] <TB1> INFO: test: highrate no parameter change
[10:09:48.979] <TB1> INFO: running: highrate
[10:09:48.979] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//phCalibrationFitErr35_C15.dat
[10:09:49.113] <TB1> INFO: ----------------------------------------------------------------------
[10:09:49.113] <TB1> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[10:09:49.113] <TB1> INFO: ----------------------------------------------------------------------
[10:09:49.113] <TB1> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[10:09:49.113] <TB1> INFO: edge/corner pixel THR is adjusted
[10:09:49.113] <TB1> INFO: PixTestHighRate::trimHotPixels: step 0...
[10:09:49.829] <TB1> INFO: Collecting data for 1 seconds...
[10:09:50.830] <TB1> INFO: Done with hot pixel readout
[10:09:53.951] <TB1> INFO: PixTest:: pg_setup set to default.
[10:09:53.952] <TB1> INFO: 0 hot pixels found in step 0
[10:09:53.959] <TB1> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[10:09:53.995] <TB1> INFO: PixTest::trimHotPixels() done
[10:09:53.996] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C0.dat
[10:09:54.002] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C1.dat
[10:09:54.009] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C2.dat
[10:09:54.022] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C3.dat
[10:09:54.029] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C4.dat
[10:09:54.035] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C5.dat
[10:09:54.041] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C6.dat
[10:09:54.047] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C7.dat
[10:09:54.054] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C8.dat
[10:09:54.060] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C9.dat
[10:09:54.066] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C10.dat
[10:09:54.072] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C11.dat
[10:09:54.078] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C12.dat
[10:09:54.084] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C13.dat
[10:09:54.091] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C14.dat
[10:09:54.097] <TB1> INFO: write trim parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//trimParameters35_C15.dat
[10:09:54.103] <TB1> INFO: write masked pixels into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//003_RetrimHotPixels_50//defaultMaskFile.dat
[10:09:54.134] <TB1> INFO: enter test to run
[10:09:54.134] <TB1> INFO: test: no parameter change
[10:09:54.379] <TB1> QUIET: Connection to board 147 closed.
[10:09:54.458] <TB1> INFO: pXar: this is the end, my friend
commander_HRData.log
[10:10:46.599] <TB1> INFO: *** Welcome to pxar ***
[10:10:46.599] <TB1> INFO: *** Today: 2016/10/05
[10:10:46.668] <TB1> INFO: *** Version: f5d3-dirty
[10:10:46.668] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//004_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//004_HRData_50//dacParameters35_C15.dat
[10:10:46.669] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//004_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//004_HRData_50//tbmParameters_C0b.dat
[10:10:46.669] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//004_HRData_50//defaultMaskFile.dat
[10:10:46.669] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//004_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//004_HRData_50//trimParameters35_C15.dat
[10:10:46.748] <TB1> INFO: clk: 4
[10:10:46.748] <TB1> INFO: ctr: 4
[10:10:46.748] <TB1> INFO: sda: 19
[10:10:46.748] <TB1> INFO: tin: 9
[10:10:46.748] <TB1> INFO: level: 15
[10:10:46.748] <TB1> INFO: triggerdelay: 0
[10:10:46.748] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[10:10:46.748] <TB1> INFO: Log level: INFO
[10:10:46.762] <TB1> INFO: Found DTB DTB_WWXTQT
[10:10:46.772] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:10:46.774] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:10:46.776] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[10:10:48.324] <TB1> INFO: DUT info:
[10:10:48.324] <TB1> INFO: The DUT currently contains the following objects:
[10:10:48.324] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:10:48.324] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:10:48.324] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:10:48.325] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:10:48.325] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.325] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:10:48.726] <TB1> INFO: enter 'restricted' command line mode
[10:10:48.726] <TB1> INFO: enter test to run
[10:10:48.726] <TB1> INFO: test: delay setting parameters: ->5<-
[10:10:48.726] <TB1> INFO: delay test by 5 seconds...
[10:10:53.726] <TB1> INFO: enter test to run
[10:10:53.726] <TB1> INFO: test: Xray no parameter change
[10:10:53.726] <TB1> INFO: running: xray
[10:10:53.727] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//004_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//004_HRData_50//phCalibrationFitErr35_C15.dat
[10:10:53.864] <TB1> INFO: ######################################################################
[10:10:53.864] <TB1> INFO: PixTestXray::doTest()
[10:10:53.864] <TB1> INFO: ######################################################################
[10:10:53.864] <TB1> INFO: ----------------------------------------------------------------------
[10:10:53.864] <TB1> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[10:10:53.864] <TB1> INFO: ----------------------------------------------------------------------
[10:10:54.587] <TB1> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[10:11:01.942] <TB1> INFO: run duration 7 seconds, buffer almost full (81%), pausing triggers.
[10:11:26.915] <TB1> INFO: Resuming triggers.
[10:11:34.282] <TB1> INFO: run duration 14 seconds, buffer almost full (81%), pausing triggers.
[10:11:59.506] <TB1> INFO: Resuming triggers.
[10:12:06.867] <TB1> INFO: run duration 22 seconds, buffer almost full (81%), pausing triggers.
[10:12:32.789] <TB1> INFO: Resuming triggers.
[10:12:40.151] <TB1> INFO: run duration 29 seconds, buffer almost full (81%), pausing triggers.
[10:13:05.640] <TB1> INFO: Resuming triggers.
[10:13:13.000] <TB1> INFO: run duration 36 seconds, buffer almost full (81%), pausing triggers.
[10:13:39.005] <TB1> INFO: Resuming triggers.
[10:13:46.361] <TB1> INFO: run duration 44 seconds, buffer almost full (81%), pausing triggers.
[10:14:12.832] <TB1> INFO: Resuming triggers.
[10:14:20.195] <TB1> INFO: run duration 51 seconds, buffer almost full (81%), pausing triggers.
[10:14:46.613] <TB1> INFO: Resuming triggers.
[10:14:53.965] <TB1> INFO: run duration 58 seconds, buffer almost full (81%), pausing triggers.
[10:15:20.473] <TB1> INFO: Resuming triggers.
[10:15:27.828] <TB1> INFO: run duration 66 seconds, buffer almost full (81%), pausing triggers.
[10:15:53.372] <TB1> INFO: Resuming triggers.
[10:16:00.724] <TB1> INFO: run duration 73 seconds, buffer almost full (81%), pausing triggers.
[10:16:26.555] <TB1> INFO: Resuming triggers.
[10:16:33.908] <TB1> INFO: run duration 80 seconds, buffer almost full (81%), pausing triggers.
[10:16:59.710] <TB1> INFO: Resuming triggers.
[10:17:07.063] <TB1> INFO: run duration 88 seconds, buffer almost full (81%), pausing triggers.
[10:17:32.621] <TB1> INFO: Resuming triggers.
[10:17:39.970] <TB1> INFO: run duration 95 seconds, buffer almost full (81%), pausing triggers.
[10:18:03.879] <TB1> INFO: Resuming triggers.
[10:18:08.338] <TB1> INFO: data taking finished, elapsed time: 100 seconds.
[10:18:23.583] <TB1> INFO: PixTest:: pg_setup set to default.
[10:18:23.584] <TB1> INFO: PixTestXray::doPhRun() done
[10:18:23.584] <TB1> INFO: PixTestXray::doTest() done
[10:18:23.760] <TB1> INFO: enter test to run
[10:18:23.760] <TB1> INFO: test: no parameter change
[10:18:24.013] <TB1> QUIET: Connection to board 147 closed.
[10:18:24.169] <TB1> INFO: pXar: this is the end, my friend
commander_HRData.log
[10:18:57.795] <TB1> INFO: *** Welcome to pxar ***
[10:18:57.796] <TB1> INFO: *** Today: 2016/10/05
[10:18:57.861] <TB1> INFO: *** Version: f5d3-dirty
[10:18:57.861] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//005_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//005_HRData_150//dacParameters35_C15.dat
[10:18:57.862] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//005_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//005_HRData_150//tbmParameters_C0b.dat
[10:18:57.862] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//005_HRData_150//defaultMaskFile.dat
[10:18:57.862] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//005_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//005_HRData_150//trimParameters35_C15.dat
[10:18:57.935] <TB1> INFO: clk: 4
[10:18:57.935] <TB1> INFO: ctr: 4
[10:18:57.935] <TB1> INFO: sda: 19
[10:18:57.935] <TB1> INFO: tin: 9
[10:18:57.935] <TB1> INFO: level: 15
[10:18:57.935] <TB1> INFO: triggerdelay: 0
[10:18:57.935] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[10:18:57.935] <TB1> INFO: Log level: INFO
[10:18:57.948] <TB1> INFO: Found DTB DTB_WWXTQT
[10:18:57.958] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:18:57.960] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:18:57.962] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[10:18:59.518] <TB1> INFO: DUT info:
[10:18:59.518] <TB1> INFO: The DUT currently contains the following objects:
[10:18:59.518] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:18:59.519] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:18:59.519] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:18:59.519] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:18:59.519] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.519] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:18:59.921] <TB1> INFO: enter 'restricted' command line mode
[10:18:59.921] <TB1> INFO: enter test to run
[10:18:59.921] <TB1> INFO: test: delay setting parameters: ->5<-
[10:18:59.921] <TB1> INFO: delay test by 5 seconds...
[10:19:04.921] <TB1> INFO: enter test to run
[10:19:04.921] <TB1> INFO: test: Xray no parameter change
[10:19:04.921] <TB1> INFO: running: xray
[10:19:04.921] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//005_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//005_HRData_150//phCalibrationFitErr35_C15.dat
[10:19:05.053] <TB1> INFO: ######################################################################
[10:19:05.053] <TB1> INFO: PixTestXray::doTest()
[10:19:05.053] <TB1> INFO: ######################################################################
[10:19:05.053] <TB1> INFO: ----------------------------------------------------------------------
[10:19:05.053] <TB1> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[10:19:05.053] <TB1> INFO: ----------------------------------------------------------------------
[10:19:05.776] <TB1> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[10:19:09.795] <TB1> INFO: run duration 4 seconds, buffer almost full (81%), pausing triggers.
[10:19:34.627] <TB1> INFO: Resuming triggers.
[10:19:38.660] <TB1> INFO: run duration 8 seconds, buffer almost full (81%), pausing triggers.
[10:20:04.540] <TB1> INFO: Resuming triggers.
[10:20:08.572] <TB1> INFO: run duration 12 seconds, buffer almost full (81%), pausing triggers.
[10:20:34.981] <TB1> INFO: Resuming triggers.
[10:20:39.011] <TB1> INFO: run duration 16 seconds, buffer almost full (81%), pausing triggers.
[10:21:06.516] <TB1> INFO: Resuming triggers.
[10:21:10.565] <TB1> INFO: run duration 20 seconds, buffer almost full (81%), pausing triggers.
[10:21:37.494] <TB1> INFO: Resuming triggers.
[10:21:41.525] <TB1> INFO: run duration 24 seconds, buffer almost full (81%), pausing triggers.
[10:22:08.068] <TB1> INFO: Resuming triggers.
[10:22:12.098] <TB1> INFO: run duration 28 seconds, buffer almost full (81%), pausing triggers.
[10:22:40.171] <TB1> INFO: Resuming triggers.
[10:22:44.198] <TB1> INFO: run duration 32 seconds, buffer almost full (81%), pausing triggers.
[10:23:11.546] <TB1> INFO: Resuming triggers.
[10:23:15.575] <TB1> INFO: run duration 36 seconds, buffer almost full (81%), pausing triggers.
[10:23:42.747] <TB1> INFO: Resuming triggers.
[10:23:46.775] <TB1> INFO: run duration 40 seconds, buffer almost full (81%), pausing triggers.
[10:24:14.846] <TB1> INFO: Resuming triggers.
[10:24:18.874] <TB1> INFO: run duration 44 seconds, buffer almost full (81%), pausing triggers.
[10:24:46.740] <TB1> INFO: Resuming triggers.
[10:24:50.770] <TB1> INFO: run duration 48 seconds, buffer almost full (81%), pausing triggers.
[10:25:17.628] <TB1> INFO: Resuming triggers.
[10:25:21.657] <TB1> INFO: run duration 52 seconds, buffer almost full (81%), pausing triggers.
[10:25:48.675] <TB1> INFO: Resuming triggers.
[10:25:52.702] <TB1> INFO: run duration 56 seconds, buffer almost full (81%), pausing triggers.
[10:26:19.684] <TB1> INFO: Resuming triggers.
[10:26:23.712] <TB1> INFO: run duration 60 seconds, buffer almost full (81%), pausing triggers.
[10:26:51.202] <TB1> INFO: Resuming triggers.
[10:26:55.229] <TB1> INFO: run duration 64 seconds, buffer almost full (81%), pausing triggers.
[10:27:07.136] <TB1> ERROR: <datapipe.cc/CheckEventValidity:L523> Channel 2 Number of ROCs (5) != Token Chain Length (4)

[10:27:07.136] <TB1> ERROR: <datapipe.cc/Read:L170> Dumping the flawed event +- 3 events:

[10:27:07.136] <TB1> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a23d 80c1 4070 31c 222e 81d 244a 4060 504 2a4f 4070 88 2a4a 502 266d 4061 e000 c000

[10:27:07.136] <TB1> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a237 8041 4060 d0 2042 2c8 2262 558 2461 548 2648 854 2647 4070 619 2685 40e0 242 2465 60a 2440 804 2661 4060 121 2a48 512 224a 6dd 284c 862 2065 e000 c000

[10:27:07.136] <TB1> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a238 80b1 4070 11 244a 75b 2666 848 2225 4060 55d 2a40 6c4 2a67 4070 11 2665 c1 2065 4060 249 2a4d 40c 284d e000 c000

[10:27:07.136] <TB1> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a239 80c1 4060 850 2629 4060 a2 2269 643 2682 40e0 311 284d 301 2040 6d1 2849 751 222a 862 284e 4060 762 266f e000 c000

[10:27:07.136] <TB1> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a23a 8001 4060 4060 158 282f 295 2860 420 224e 4d8 202f 750 202f 80d 2849 4060 140 2642 344 2a4d 34c 2268 44b 244d 40f0 40f3 de0 2388 de0 2020 960 2284 e000 c000

[10:27:07.136] <TB1> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a23b 8041 4060 498 2661 65d 2262 70a 2860 85c 202e 4060 22 2468 4060 4060 19 284f e000 c000

[10:27:07.136] <TB1> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a23c 80b1 4070 44 202c 158 2647 348 204c 741 2260 40e0 114 2a48 719 2861 40e0 11d 204b 10a 204a 104 2649 25b 2a6a 2d3 264f 40a 2a68 640 2443 4060 1c 2462 489 2047 4da 286b e000 c000

[10:27:23.382] <TB1> INFO: Resuming triggers.
[10:27:27.408] <TB1> INFO: run duration 68 seconds, buffer almost full (81%), pausing triggers.
[10:27:56.093] <TB1> INFO: Resuming triggers.
[10:28:00.118] <TB1> INFO: run duration 72 seconds, buffer almost full (81%), pausing triggers.
[10:28:26.493] <TB1> INFO: Resuming triggers.
[10:28:30.515] <TB1> INFO: run duration 76 seconds, buffer almost full (81%), pausing triggers.
[10:28:56.846] <TB1> INFO: Resuming triggers.
[10:29:00.868] <TB1> INFO: run duration 80 seconds, buffer almost full (81%), pausing triggers.
[10:29:27.966] <TB1> INFO: Resuming triggers.
[10:29:31.986] <TB1> INFO: run duration 84 seconds, buffer almost full (81%), pausing triggers.
[10:29:58.434] <TB1> INFO: Resuming triggers.
[10:30:02.459] <TB1> INFO: run duration 88 seconds, buffer almost full (81%), pausing triggers.
[10:30:26.337] <TB1> INFO: Resuming triggers.
[10:30:30.360] <TB1> INFO: run duration 92 seconds, buffer almost full (81%), pausing triggers.
[10:30:54.922] <TB1> INFO: Resuming triggers.
[10:30:58.941] <TB1> INFO: run duration 96 seconds, buffer almost full (81%), pausing triggers.
[10:31:23.856] <TB1> INFO: Resuming triggers.
[10:31:27.291] <TB1> INFO: data taking finished, elapsed time: 100 seconds.
[10:31:48.885] <TB1> INFO: PixTest:: pg_setup set to default.
[10:31:48.886] <TB1> INFO: PixTestXray::doPhRun() done
[10:31:48.886] <TB1> INFO: PixTestXray::doTest() done
[10:31:49.072] <TB1> INFO: enter test to run
[10:31:49.072] <TB1> INFO: test: no parameter change
[10:31:49.308] <TB1> QUIET: Connection to board 147 closed.
[10:31:49.388] <TB1> INFO: pXar: this is the end, my friend
commander_HRSCurves.log
[10:32:23.110] <TB1> INFO: *** Welcome to pxar ***
[10:32:23.110] <TB1> INFO: *** Today: 2016/10/05
[10:32:23.181] <TB1> INFO: *** Version: f5d3-dirty
[10:32:23.181] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//006_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//006_HRSCurves_100//dacParameters35_C15.dat
[10:32:23.182] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//006_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//006_HRSCurves_100//tbmParameters_C0b.dat
[10:32:23.182] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//006_HRSCurves_100//defaultMaskFile.dat
[10:32:23.182] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//006_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//006_HRSCurves_100//trimParameters35_C15.dat
[10:32:23.254] <TB1> INFO: clk: 4
[10:32:23.254] <TB1> INFO: ctr: 4
[10:32:23.254] <TB1> INFO: sda: 19
[10:32:23.254] <TB1> INFO: tin: 9
[10:32:23.254] <TB1> INFO: level: 15
[10:32:23.254] <TB1> INFO: triggerdelay: 0
[10:32:23.254] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[10:32:23.254] <TB1> INFO: Log level: INFO
[10:32:23.269] <TB1> INFO: Found DTB DTB_WWXTQT
[10:32:23.279] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:32:23.281] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:32:23.282] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[10:32:24.818] <TB1> INFO: DUT info:
[10:32:24.818] <TB1> INFO: The DUT currently contains the following objects:
[10:32:24.818] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:32:24.818] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:32:24.818] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:32:24.818] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:32:24.818] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.818] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.819] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.819] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.819] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.819] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.819] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.819] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.819] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.819] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.819] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.819] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.819] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.819] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.819] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:24.819] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:32:25.220] <TB1> INFO: enter 'restricted' command line mode
[10:32:25.220] <TB1> INFO: enter test to run
[10:32:25.220] <TB1> INFO: test: Highrate no parameter change
[10:32:25.220] <TB1> INFO: running: highrate
[10:32:25.220] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//006_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//006_HRSCurves_100//phCalibrationFitErr35_C15.dat
[10:32:25.371] <TB1> INFO: ----------------------------------------------------------------------
[10:32:25.371] <TB1> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[10:32:25.371] <TB1> INFO: ----------------------------------------------------------------------
[10:32:25.378] <TB1> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 15 .. 75 (20/-1) hits flags = 896 (plus default)
[10:32:25.392] <TB1> INFO: dacScan step from 15 .. 34
[10:32:25.392] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[10:32:25.392] <TB1> INFO: run 1 of 1
[10:32:25.908] <TB1> INFO: Expecting 4160000 events.
[10:32:52.592] <TB1> INFO: 456500 events read in total (26280ms).
[10:33:19.226] <TB1> INFO: 915600 events read in total (52914ms).
[10:33:45.619] <TB1> INFO: 1375150 events read in total (79307ms).
[10:34:11.974] <TB1> INFO: 1834450 events read in total (105662ms).
[10:34:38.776] <TB1> INFO: 2293400 events read in total (132464ms).
[10:35:05.214] <TB1> INFO: 2752950 events read in total (158902ms).
[10:35:32.044] <TB1> INFO: 3212500 events read in total (185732ms).
[10:35:58.418] <TB1> INFO: 3671550 events read in total (212106ms).
[10:36:24.835] <TB1> INFO: 4130600 events read in total (238523ms).
[10:36:26.709] <TB1> INFO: 4160000 events read in total (240397ms).
[10:36:26.941] <TB1> INFO: Test took 241548ms.
[10:36:34.659] <TB1> INFO: dacScan step from 35 .. 54
[10:36:34.659] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[10:36:34.659] <TB1> INFO: run 1 of 1
[10:36:35.142] <TB1> INFO: Expecting 4160000 events.
[10:37:01.030] <TB1> INFO: 387700 events read in total (25487ms).
[10:37:26.738] <TB1> INFO: 776250 events read in total (51195ms).
[10:37:52.181] <TB1> INFO: 1164000 events read in total (76638ms).
[10:38:17.139] <TB1> INFO: 1550600 events read in total (101596ms).
[10:38:42.609] <TB1> INFO: 1935800 events read in total (127066ms).
[10:39:08.491] <TB1> INFO: 2318650 events read in total (152948ms).
[10:39:33.438] <TB1> INFO: 2698800 events read in total (177895ms).
[10:39:58.189] <TB1> INFO: 3075350 events read in total (202646ms).
[10:40:23.600] <TB1> INFO: 3448750 events read in total (228057ms).
[10:40:49.033] <TB1> INFO: 3820500 events read in total (253490ms).
[10:41:12.293] <TB1> INFO: 4160000 events read in total (276750ms).
[10:41:12.484] <TB1> INFO: Test took 277825ms.
[10:41:20.163] <TB1> INFO: dacScan step from 55 .. 74
[10:41:20.163] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[10:41:20.163] <TB1> INFO: run 1 of 1
[10:41:20.675] <TB1> INFO: Expecting 4160000 events.
[10:41:45.284] <TB1> INFO: 339000 events read in total (24208ms).
[10:42:09.351] <TB1> INFO: 678700 events read in total (48275ms).
[10:42:33.871] <TB1> INFO: 1018500 events read in total (72795ms).
[10:42:58.019] <TB1> INFO: 1358100 events read in total (96943ms).
[10:43:22.252] <TB1> INFO: 1697750 events read in total (121176ms).
[10:43:46.502] <TB1> INFO: 2037450 events read in total (145426ms).
[10:44:10.795] <TB1> INFO: 2376900 events read in total (169719ms).
[10:44:35.247] <TB1> INFO: 2716250 events read in total (194171ms).
[10:44:59.618] <TB1> INFO: 3055650 events read in total (218542ms).
[10:45:23.002] <TB1> INFO: 3395100 events read in total (241926ms).
[10:45:46.231] <TB1> INFO: 3734400 events read in total (265155ms).
[10:46:09.080] <TB1> INFO: 4073350 events read in total (288004ms).
[10:46:15.640] <TB1> INFO: 4160000 events read in total (294564ms).
[10:46:15.808] <TB1> INFO: Test took 295645ms.
[10:46:23.894] <TB1> INFO: dacScan step from 75 .. 75
[10:46:23.894] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[10:46:23.894] <TB1> INFO: run 1 of 1
[10:46:24.376] <TB1> INFO: Expecting 208000 events.
[10:46:39.890] <TB1> INFO: 208000 events read in total (15112ms).
[10:46:39.898] <TB1> INFO: Test took 16003ms.
[10:46:40.262] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:41.700] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:42.721] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:43.745] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:44.799] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:45.857] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:46.926] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:47.994] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:49.065] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:50.131] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:51.287] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:52.586] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:53.758] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:54.798] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:55.837] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:57.172] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[10:46:58.207] <TB1> INFO: PixTest:: pg_setup set to default.
[10:46:58.208] <TB1> INFO: vcal mean: 38.61 39.13 38.91 42.60 41.60 42.31 43.03 43.02 42.60 42.93 41.78 42.26 40.86 39.19 39.09 39.02
[10:46:58.208] <TB1> INFO: vcal RMS: 1.07 1.11 0.97 1.46 1.21 1.39 1.39 1.44 1.46 1.45 1.43 1.54 1.23 1.75 1.05 1.11
[10:46:58.208] <TB1> INFO: number of X-ray hits detected: 207731 221687 220800 372565 339144 417706 419171 411759 418656 405356 373035 371391 317486 210410 217682 208149
[10:46:58.208] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:46:58.208] <TB1> INFO: X-ray hit rate [MHz/cm2]: 60.9 65.0 64.7 109.2 99.4 122.4 122.9 120.7 122.7 118.8 109.3 108.9 93.1 61.7 63.8 61.0
[10:46:58.208] <TB1> INFO: PixTestHighRate::doXNoiseMaps() done
[10:46:58.304] <TB1> INFO: enter test to run
[10:46:58.304] <TB1> INFO: test: no parameter change
[10:46:58.559] <TB1> QUIET: Connection to board 147 closed.
[10:46:58.639] <TB1> INFO: pXar: this is the end, my friend
commander_CalDelScanAndSaveDacs.log
[11:06:04.825] <TB1> INFO: *** Welcome to pxar ***
[11:06:04.825] <TB1> INFO: *** Today: 2016/10/05
[11:06:04.894] <TB1> INFO: *** Version: f5d3-dirty
[11:06:04.894] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[11:06:04.895] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[11:06:04.896] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[11:06:04.896] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[11:06:04.981] <TB1> INFO: clk: 4
[11:06:04.981] <TB1> INFO: ctr: 4
[11:06:04.981] <TB1> INFO: sda: 19
[11:06:04.981] <TB1> INFO: tin: 9
[11:06:04.981] <TB1> INFO: level: 15
[11:06:04.981] <TB1> INFO: triggerdelay: 0
[11:06:04.981] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[11:06:04.981] <TB1> INFO: Log level: INFO
[11:06:04.993] <TB1> INFO: Found DTB DTB_WWXTQT
[11:06:05.003] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:06:05.005] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:06:05.007] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[11:06:06.544] <TB1> INFO: DUT info:
[11:06:06.544] <TB1> INFO: The DUT currently contains the following objects:
[11:06:06.544] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:06:06.544] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:06:06.544] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:06:06.544] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:06:06.544] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.544] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.544] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.544] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.544] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.544] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.544] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.544] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.544] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.544] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.544] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.544] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.544] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.544] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.545] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.545] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:06:06.945] <TB1> INFO: enter 'restricted' command line mode
[11:06:06.945] <TB1> INFO: enter test to run
[11:06:06.945] <TB1> INFO: test: HighRate no parameter change
[11:06:06.945] <TB1> INFO: running: highrate
[11:06:06.946] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[11:06:07.163] <TB1> INFO: ----------------------------------------------------------------------
[11:06:07.163] <TB1> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[11:06:07.163] <TB1> INFO: ----------------------------------------------------------------------
[11:06:07.258] <TB1> INFO: Expecting 768 events.
[11:06:08.246] <TB1> INFO: 768 events read in total (430ms).
[11:06:08.309] <TB1> INFO: Test took 1140ms.
[11:06:08.791] <TB1> INFO: Expecting 41600 events.
[11:06:11.991] <TB1> INFO: 41600 events read in total (2798ms).
[11:06:11.993] <TB1> INFO: Test took 3680ms.
[11:06:12.618] <TB1> INFO: Expecting 41600 events.
[11:06:15.744] <TB1> INFO: 41600 events read in total (2724ms).
[11:06:15.747] <TB1> INFO: Test took 3632ms.
[11:06:16.334] <TB1> INFO: Expecting 41600 events.
[11:06:19.241] <TB1> INFO: 41600 events read in total (2505ms).
[11:06:19.243] <TB1> INFO: Test took 3388ms.
[11:06:19.833] <TB1> INFO: Expecting 41600 events.
[11:06:22.754] <TB1> INFO: 41600 events read in total (2521ms).
[11:06:22.757] <TB1> INFO: Test took 3404ms.
[11:06:23.384] <TB1> INFO: Expecting 41600 events.
[11:06:26.323] <TB1> INFO: 41600 events read in total (2537ms).
[11:06:26.325] <TB1> INFO: Test took 3444ms.
[11:06:26.915] <TB1> INFO: Expecting 41600 events.
[11:06:29.961] <TB1> INFO: 41600 events read in total (2645ms).
[11:06:29.963] <TB1> INFO: Test took 3528ms.
[11:06:30.559] <TB1> INFO: Expecting 41600 events.
[11:06:33.652] <TB1> INFO: 41600 events read in total (2691ms).
[11:06:33.654] <TB1> INFO: Test took 3579ms.
[11:06:34.276] <TB1> INFO: Expecting 41600 events.
[11:06:37.261] <TB1> INFO: 41600 events read in total (2583ms).
[11:06:37.263] <TB1> INFO: Test took 3488ms.
[11:06:37.860] <TB1> INFO: Expecting 41600 events.
[11:06:40.837] <TB1> INFO: 41600 events read in total (2575ms).
[11:06:40.840] <TB1> INFO: Test took 3464ms.
[11:06:41.438] <TB1> INFO: Expecting 41600 events.
[11:06:44.459] <TB1> INFO: 41600 events read in total (2620ms).
[11:06:44.461] <TB1> INFO: Test took 3508ms.
[11:06:45.074] <TB1> INFO: Expecting 41600 events.
[11:06:48.022] <TB1> INFO: 41600 events read in total (2547ms).
[11:06:48.024] <TB1> INFO: Test took 3449ms.
[11:06:48.615] <TB1> INFO: Expecting 41600 events.
[11:06:51.675] <TB1> INFO: 41600 events read in total (2658ms).
[11:06:51.677] <TB1> INFO: Test took 3541ms.
[11:06:52.275] <TB1> INFO: Expecting 41600 events.
[11:06:55.311] <TB1> INFO: 41600 events read in total (2634ms).
[11:06:55.313] <TB1> INFO: Test took 3523ms.
[11:06:55.913] <TB1> INFO: Expecting 41600 events.
[11:06:58.938] <TB1> INFO: 41600 events read in total (2623ms).
[11:06:58.941] <TB1> INFO: Test took 3513ms.
[11:06:59.535] <TB1> INFO: Expecting 41600 events.
[11:07:02.581] <TB1> INFO: 41600 events read in total (2645ms).
[11:07:02.583] <TB1> INFO: Test took 3529ms.
[11:07:03.213] <TB1> INFO: Expecting 41600 events.
[11:07:06.164] <TB1> INFO: 41600 events read in total (2550ms).
[11:07:06.166] <TB1> INFO: Test took 3459ms.
[11:07:06.762] <TB1> INFO: Expecting 41600 events.
[11:07:09.794] <TB1> INFO: 41600 events read in total (2630ms).
[11:07:09.796] <TB1> INFO: Test took 3517ms.
[11:07:10.434] <TB1> INFO: Expecting 41600 events.
[11:07:13.459] <TB1> INFO: 41600 events read in total (2624ms).
[11:07:13.461] <TB1> INFO: Test took 3536ms.
[11:07:14.058] <TB1> INFO: Expecting 41600 events.
[11:07:17.060] <TB1> INFO: 41600 events read in total (2601ms).
[11:07:17.063] <TB1> INFO: Test took 3486ms.
[11:07:17.702] <TB1> INFO: Expecting 41600 events.
[11:07:20.559] <TB1> INFO: 41600 events read in total (2455ms).
[11:07:20.561] <TB1> INFO: Test took 3362ms.
[11:07:20.921] <TB1> INFO: enter test to run
[11:07:20.921] <TB1> INFO: test: Pretest no parameter change
[11:07:20.921] <TB1> INFO: running: pretest
[11:07:20.921] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[11:07:20.921] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[11:07:20.921] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[11:07:20.921] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[11:07:20.921] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[11:07:20.921] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[11:07:20.921] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[11:07:20.922] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[11:07:20.922] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[11:07:20.922] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[11:07:20.922] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[11:07:20.922] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[11:07:20.922] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[11:07:20.922] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[11:07:20.922] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[11:07:20.922] <TB1> INFO: write dac parameters into /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[11:07:20.922] <TB1> INFO: enter test to run
[11:07:20.922] <TB1> INFO: test: no parameter change
[11:07:21.144] <TB1> QUIET: Connection to board 147 closed.
[11:07:21.224] <TB1> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[11:08:05.827] <TB1> INFO: *** Welcome to pxar ***
[11:08:05.827] <TB1> INFO: *** Today: 2016/10/05
[11:08:05.894] <TB1> INFO: *** Version: f5d3-dirty
[11:08:05.894] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//012_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//012_HREfficiency_50//dacParameters35_C15.dat
[11:08:05.895] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//012_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//012_HREfficiency_50//tbmParameters_C0b.dat
[11:08:05.895] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//012_HREfficiency_50//defaultMaskFile.dat
[11:08:05.895] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//012_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//012_HREfficiency_50//trimParameters35_C15.dat
[11:08:05.973] <TB1> INFO: clk: 4
[11:08:05.973] <TB1> INFO: ctr: 4
[11:08:05.973] <TB1> INFO: sda: 19
[11:08:05.973] <TB1> INFO: tin: 9
[11:08:05.973] <TB1> INFO: level: 15
[11:08:05.973] <TB1> INFO: triggerdelay: 0
[11:08:05.973] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[11:08:05.973] <TB1> INFO: Log level: INFO
[11:08:05.986] <TB1> INFO: Found DTB DTB_WWXTQT
[11:08:05.996] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:08:05.998] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:08:05.999] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[11:08:07.542] <TB1> INFO: DUT info:
[11:08:07.542] <TB1> INFO: The DUT currently contains the following objects:
[11:08:07.542] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:08:07.542] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:08:07.542] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:08:07.542] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:08:07.542] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.542] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:08:07.942] <TB1> INFO: enter 'restricted' command line mode
[11:08:07.943] <TB1> INFO: enter test to run
[11:08:07.943] <TB1> INFO: test: PixelAlive no parameter change
[11:08:07.943] <TB1> INFO: running: pixelalive
[11:08:07.946] <TB1> INFO: ######################################################################
[11:08:07.946] <TB1> INFO: PixTestAlive::doTest()
[11:08:07.946] <TB1> INFO: ######################################################################
[11:08:07.947] <TB1> INFO: ----------------------------------------------------------------------
[11:08:07.947] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:08:07.947] <TB1> INFO: ----------------------------------------------------------------------
[11:08:08.205] <TB1> INFO: Expecting 208000 events.
[11:08:17.404] <TB1> INFO: 208000 events read in total (8640ms).
[11:08:17.406] <TB1> INFO: Test took 9457ms.
[11:08:17.647] <TB1> INFO: PixTestAlive::aliveTest() done
[11:08:17.647] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[11:08:17.649] <TB1> INFO: ----------------------------------------------------------------------
[11:08:17.649] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:08:17.649] <TB1> INFO: ----------------------------------------------------------------------
[11:08:17.935] <TB1> INFO: Expecting 208000 events.
[11:08:24.469] <TB1> INFO: 208000 events read in total (5978ms).
[11:08:24.472] <TB1> INFO: Test took 6821ms.
[11:08:24.472] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:08:24.675] <TB1> INFO: PixTestAlive::maskTest() done
[11:08:24.675] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:08:24.677] <TB1> INFO: ----------------------------------------------------------------------
[11:08:24.677] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:08:24.677] <TB1> INFO: ----------------------------------------------------------------------
[11:08:24.939] <TB1> INFO: Expecting 208000 events.
[11:08:34.481] <TB1> INFO: 208000 events read in total (8986ms).
[11:08:34.482] <TB1> INFO: Test took 9804ms.
[11:08:34.684] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:08:34.684] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:08:34.684] <TB1> INFO: PixTestAlive::doTest() done, duration: 26 seconds
[11:08:34.720] <TB1> INFO: enter test to run
[11:08:34.720] <TB1> INFO: test: delay setting parameters: ->2<-
[11:08:34.720] <TB1> INFO: delay test by 2 seconds...
[11:08:36.720] <TB1> INFO: enter test to run
[11:08:36.720] <TB1> INFO: test: HighRate no parameter change
[11:08:36.720] <TB1> INFO: running: highrate
[11:08:36.720] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//012_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//012_HREfficiency_50//phCalibrationFitErr35_C15.dat
[11:08:36.859] <TB1> INFO: ----------------------------------------------------------------------
[11:08:36.859] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:08:36.859] <TB1> INFO: ----------------------------------------------------------------------
[11:08:37.348] <TB1> INFO: Expecting 208000 events.
[11:08:49.263] <TB1> INFO: 208000 events read in total (11514ms).
[11:08:49.269] <TB1> INFO: Test took 12407ms.
[11:08:49.839] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[11:08:49.839] <TB1> INFO: number of red-efficiency pixels: 144 165 172 349 243 405 386 329 383 364 249 316 205 161 123 130
[11:08:49.839] <TB1> INFO: number of X-ray hits detected: 101990 107751 107914 187302 167294 210071 210335 206378 208413 202498 185298 185633 157377 102450 106056 103088
[11:08:49.839] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:08:49.839] <TB1> INFO: number of Vcal hits detected: 207851 207831 207811 207632 207751 207563 207598 207652 207596 207618 207737 207663 207789 207638 207871 207863
[11:08:49.839] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.8 99.9 99.8 99.8 99.8 99.8 99.8 99.9 99.9 99.9 99.9 99.9 99.9
[11:08:49.839] <TB1> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.8 99.9 99.8 99.8 99.8 99.8 99.8 99.9 99.8 99.9 99.8 99.9 99.9
[11:08:49.839] <TB1> INFO: X-ray hit rate [MHz/cm2]: 29.9 31.6 31.6 54.9 49.0 61.6 61.7 60.5 61.1 59.4 54.3 54.4 46.1 30.0 31.1 30.2
[11:08:49.839] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:08:49.869] <TB1> INFO: PixTest:: pg_setup set to default.
[11:08:49.878] <TB1> INFO: enter test to run
[11:08:49.878] <TB1> INFO: test: no parameter change
[11:08:50.146] <TB1> QUIET: Connection to board 147 closed.
[11:08:50.225] <TB1> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[11:09:35.240] <TB1> INFO: *** Welcome to pxar ***
[11:09:35.240] <TB1> INFO: *** Today: 2016/10/05
[11:09:35.306] <TB1> INFO: *** Version: f5d3-dirty
[11:09:35.306] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//013_HREfficiency_75//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//013_HREfficiency_75//dacParameters35_C15.dat
[11:09:35.307] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//013_HREfficiency_75//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//013_HREfficiency_75//tbmParameters_C0b.dat
[11:09:35.307] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//013_HREfficiency_75//defaultMaskFile.dat
[11:09:35.307] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//013_HREfficiency_75//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//013_HREfficiency_75//trimParameters35_C15.dat
[11:09:35.406] <TB1> INFO: clk: 4
[11:09:35.406] <TB1> INFO: ctr: 4
[11:09:35.406] <TB1> INFO: sda: 19
[11:09:35.406] <TB1> INFO: tin: 9
[11:09:35.406] <TB1> INFO: level: 15
[11:09:35.406] <TB1> INFO: triggerdelay: 0
[11:09:35.406] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[11:09:35.406] <TB1> INFO: Log level: INFO
[11:09:35.419] <TB1> INFO: Found DTB DTB_WWXTQT
[11:09:35.429] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:09:35.431] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:09:35.433] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[11:09:37.009] <TB1> INFO: DUT info:
[11:09:37.009] <TB1> INFO: The DUT currently contains the following objects:
[11:09:37.009] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:09:37.009] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:09:37.009] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:09:37.009] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:09:37.009] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.009] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.009] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.010] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.010] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.010] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.010] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.010] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.010] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.010] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.010] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.010] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.010] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.010] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.010] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.010] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:09:37.410] <TB1> INFO: enter 'restricted' command line mode
[11:09:37.410] <TB1> INFO: enter test to run
[11:09:37.410] <TB1> INFO: test: PixelAlive no parameter change
[11:09:37.410] <TB1> INFO: running: pixelalive
[11:09:37.415] <TB1> INFO: ######################################################################
[11:09:37.415] <TB1> INFO: PixTestAlive::doTest()
[11:09:37.416] <TB1> INFO: ######################################################################
[11:09:37.417] <TB1> INFO: ----------------------------------------------------------------------
[11:09:37.417] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:09:37.417] <TB1> INFO: ----------------------------------------------------------------------
[11:09:37.688] <TB1> INFO: Expecting 208000 events.
[11:09:47.002] <TB1> INFO: 208000 events read in total (8755ms).
[11:09:47.004] <TB1> INFO: Test took 9585ms.
[11:09:47.230] <TB1> INFO: PixTestAlive::aliveTest() done
[11:09:47.230] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[11:09:47.232] <TB1> INFO: ----------------------------------------------------------------------
[11:09:47.232] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:09:47.232] <TB1> INFO: ----------------------------------------------------------------------
[11:09:47.509] <TB1> INFO: Expecting 208000 events.
[11:09:53.917] <TB1> INFO: 208000 events read in total (5852ms).
[11:09:53.918] <TB1> INFO: Test took 6685ms.
[11:09:53.918] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:09:54.128] <TB1> INFO: PixTestAlive::maskTest() done
[11:09:54.128] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:09:54.129] <TB1> INFO: ----------------------------------------------------------------------
[11:09:54.129] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:09:54.129] <TB1> INFO: ----------------------------------------------------------------------
[11:09:54.392] <TB1> INFO: Expecting 208000 events.
[11:10:03.847] <TB1> INFO: 208000 events read in total (8899ms).
[11:10:03.847] <TB1> INFO: Test took 9717ms.
[11:10:04.047] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:10:04.047] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:10:04.047] <TB1> INFO: PixTestAlive::doTest() done, duration: 26 seconds
[11:10:04.079] <TB1> INFO: enter test to run
[11:10:04.079] <TB1> INFO: test: delay setting parameters: ->2<-
[11:10:04.079] <TB1> INFO: delay test by 2 seconds...
[11:10:06.080] <TB1> INFO: enter test to run
[11:10:06.080] <TB1> INFO: test: HighRate no parameter change
[11:10:06.080] <TB1> INFO: running: highrate
[11:10:06.080] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//013_HREfficiency_75//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//013_HREfficiency_75//phCalibrationFitErr35_C15.dat
[11:10:06.248] <TB1> INFO: ----------------------------------------------------------------------
[11:10:06.248] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:10:06.248] <TB1> INFO: ----------------------------------------------------------------------
[11:10:06.767] <TB1> INFO: Expecting 208000 events.
[11:10:20.286] <TB1> INFO: 208000 events read in total (13117ms).
[11:10:20.294] <TB1> INFO: Test took 14043ms.
[11:10:21.011] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[11:10:21.012] <TB1> INFO: number of red-efficiency pixels: 224 290 385 689 452 805 755 731 701 710 569 588 439 347 239 273
[11:10:21.013] <TB1> INFO: number of X-ray hits detected: 151391 161282 160017 272796 245997 303538 307120 301346 303919 295836 272115 271562 231202 151398 157589 150482
[11:10:21.013] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:10:21.013] <TB1> INFO: number of Vcal hits detected: 207769 207693 207553 207213 207495 207047 207110 207178 207198 207179 207356 207329 207518 207410 207755 207718
[11:10:21.013] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.8 99.7 99.8 99.6 99.6 99.6 99.6 99.7 99.7 99.7 99.8 99.8 99.9 99.9
[11:10:21.013] <TB1> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.8 99.6 99.8 99.5 99.6 99.6 99.6 99.6 99.7 99.7 99.8 99.7 99.9 99.9
[11:10:21.013] <TB1> INFO: X-ray hit rate [MHz/cm2]: 44.4 47.3 46.9 80.0 72.1 89.0 90.0 88.3 89.1 86.7 79.8 79.6 67.8 44.4 46.2 44.1
[11:10:21.013] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:10:21.036] <TB1> INFO: PixTest:: pg_setup set to default.
[11:10:21.046] <TB1> INFO: enter test to run
[11:10:21.046] <TB1> INFO: test: no parameter change
[11:10:21.336] <TB1> QUIET: Connection to board 147 closed.
[11:10:21.415] <TB1> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[11:11:04.441] <TB1> INFO: *** Welcome to pxar ***
[11:11:04.441] <TB1> INFO: *** Today: 2016/10/05
[11:11:04.509] <TB1> INFO: *** Version: f5d3-dirty
[11:11:04.509] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//014_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//014_HREfficiency_100//dacParameters35_C15.dat
[11:11:04.509] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//014_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//014_HREfficiency_100//tbmParameters_C0b.dat
[11:11:04.509] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//014_HREfficiency_100//defaultMaskFile.dat
[11:11:04.510] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//014_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//014_HREfficiency_100//trimParameters35_C15.dat
[11:11:04.589] <TB1> INFO: clk: 4
[11:11:04.589] <TB1> INFO: ctr: 4
[11:11:04.589] <TB1> INFO: sda: 19
[11:11:04.589] <TB1> INFO: tin: 9
[11:11:04.589] <TB1> INFO: level: 15
[11:11:04.589] <TB1> INFO: triggerdelay: 0
[11:11:04.590] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[11:11:04.590] <TB1> INFO: Log level: INFO
[11:11:04.602] <TB1> INFO: Found DTB DTB_WWXTQT
[11:11:04.612] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:11:04.614] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:11:04.615] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[11:11:06.153] <TB1> INFO: DUT info:
[11:11:06.154] <TB1> INFO: The DUT currently contains the following objects:
[11:11:06.154] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:11:06.154] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:11:06.154] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:11:06.154] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:11:06.154] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.154] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:11:06.554] <TB1> INFO: enter 'restricted' command line mode
[11:11:06.554] <TB1> INFO: enter test to run
[11:11:06.554] <TB1> INFO: test: PixelAlive no parameter change
[11:11:06.554] <TB1> INFO: running: pixelalive
[11:11:06.558] <TB1> INFO: ######################################################################
[11:11:06.558] <TB1> INFO: PixTestAlive::doTest()
[11:11:06.558] <TB1> INFO: ######################################################################
[11:11:06.559] <TB1> INFO: ----------------------------------------------------------------------
[11:11:06.559] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:11:06.559] <TB1> INFO: ----------------------------------------------------------------------
[11:11:06.819] <TB1> INFO: Expecting 208000 events.
[11:11:16.247] <TB1> INFO: 208000 events read in total (8869ms).
[11:11:16.249] <TB1> INFO: Test took 9689ms.
[11:11:16.476] <TB1> INFO: PixTestAlive::aliveTest() done
[11:11:16.476] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[11:11:16.477] <TB1> INFO: ----------------------------------------------------------------------
[11:11:16.477] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:11:16.477] <TB1> INFO: ----------------------------------------------------------------------
[11:11:16.762] <TB1> INFO: Expecting 208000 events.
[11:11:23.280] <TB1> INFO: 208000 events read in total (5961ms).
[11:11:23.282] <TB1> INFO: Test took 6803ms.
[11:11:23.282] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:11:23.486] <TB1> INFO: PixTestAlive::maskTest() done
[11:11:23.486] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:11:23.487] <TB1> INFO: ----------------------------------------------------------------------
[11:11:23.488] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:11:23.488] <TB1> INFO: ----------------------------------------------------------------------
[11:11:23.760] <TB1> INFO: Expecting 208000 events.
[11:11:32.999] <TB1> INFO: 208000 events read in total (8683ms).
[11:11:32.999] <TB1> INFO: Test took 9510ms.
[11:11:33.199] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:11:33.199] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:11:33.199] <TB1> INFO: PixTestAlive::doTest() done, duration: 26 seconds
[11:11:33.235] <TB1> INFO: enter test to run
[11:11:33.235] <TB1> INFO: test: delay setting parameters: ->2<-
[11:11:33.235] <TB1> INFO: delay test by 2 seconds...
[11:11:35.235] <TB1> INFO: enter test to run
[11:11:35.235] <TB1> INFO: test: HighRate no parameter change
[11:11:35.235] <TB1> INFO: running: highrate
[11:11:35.236] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//014_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//014_HREfficiency_100//phCalibrationFitErr35_C15.dat
[11:11:35.404] <TB1> INFO: ----------------------------------------------------------------------
[11:11:35.404] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:11:35.404] <TB1> INFO: ----------------------------------------------------------------------
[11:11:35.929] <TB1> INFO: Expecting 208000 events.
[11:11:51.268] <TB1> INFO: 208000 events read in total (14938ms).
[11:11:51.278] <TB1> INFO: Test took 15871ms.
[11:11:52.199] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[11:11:52.200] <TB1> INFO: number of red-efficiency pixels: 389 531 635 1374 947 1546 1443 1360 1455 1302 1107 1137 774 579 363 485
[11:11:52.200] <TB1> INFO: number of X-ray hits detected: 208216 222624 221394 371689 337610 417081 420667 412130 417216 404513 373983 371969 318848 210847 218513 208753
[11:11:52.200] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:11:52.200] <TB1> INFO: number of Vcal hits detected: 207587 207420 207071 206153 206829 205742 205921 206210 206032 206273 206575 206487 207099 207027 207603 207455
[11:11:52.200] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.8 99.7 99.6 99.2 99.5 99.1 99.1 99.2 99.2 99.3 99.4 99.4 99.6 99.7 99.8 99.8
[11:11:52.200] <TB1> INFO: Vcal hit overall efficiency (%): 99.8 99.7 99.6 99.1 99.4 98.9 99.0 99.1 99.1 99.2 99.3 99.3 99.6 99.5 99.8 99.7
[11:11:52.200] <TB1> INFO: X-ray hit rate [MHz/cm2]: 61.0 65.3 64.9 108.9 99.0 122.2 123.3 120.8 122.3 118.6 109.6 109.0 93.5 61.8 64.0 61.2
[11:11:52.200] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:11:52.229] <TB1> INFO: PixTest:: pg_setup set to default.
[11:11:52.240] <TB1> INFO: enter test to run
[11:11:52.240] <TB1> INFO: test: no parameter change
[11:11:52.526] <TB1> QUIET: Connection to board 147 closed.
[11:11:52.606] <TB1> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[11:12:39.998] <TB1> INFO: *** Welcome to pxar ***
[11:12:39.998] <TB1> INFO: *** Today: 2016/10/05
[11:12:40.066] <TB1> INFO: *** Version: f5d3-dirty
[11:12:40.066] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//015_HREfficiency_125//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//015_HREfficiency_125//dacParameters35_C15.dat
[11:12:40.067] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//015_HREfficiency_125//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//015_HREfficiency_125//tbmParameters_C0b.dat
[11:12:40.067] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//015_HREfficiency_125//defaultMaskFile.dat
[11:12:40.067] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//015_HREfficiency_125//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//015_HREfficiency_125//trimParameters35_C15.dat
[11:12:40.140] <TB1> INFO: clk: 4
[11:12:40.140] <TB1> INFO: ctr: 4
[11:12:40.140] <TB1> INFO: sda: 19
[11:12:40.140] <TB1> INFO: tin: 9
[11:12:40.140] <TB1> INFO: level: 15
[11:12:40.140] <TB1> INFO: triggerdelay: 0
[11:12:40.141] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[11:12:40.141] <TB1> INFO: Log level: INFO
[11:12:40.153] <TB1> INFO: Found DTB DTB_WWXTQT
[11:12:40.163] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:12:40.165] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:12:40.167] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[11:12:41.698] <TB1> INFO: DUT info:
[11:12:41.698] <TB1> INFO: The DUT currently contains the following objects:
[11:12:41.698] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:12:41.698] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:12:41.698] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:12:41.698] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:12:41.698] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:41.698] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:12:42.099] <TB1> INFO: enter 'restricted' command line mode
[11:12:42.099] <TB1> INFO: enter test to run
[11:12:42.099] <TB1> INFO: test: PixelAlive no parameter change
[11:12:42.099] <TB1> INFO: running: pixelalive
[11:12:42.103] <TB1> INFO: ######################################################################
[11:12:42.103] <TB1> INFO: PixTestAlive::doTest()
[11:12:42.103] <TB1> INFO: ######################################################################
[11:12:42.104] <TB1> INFO: ----------------------------------------------------------------------
[11:12:42.104] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:12:42.104] <TB1> INFO: ----------------------------------------------------------------------
[11:12:42.380] <TB1> INFO: Expecting 208000 events.
[11:12:51.884] <TB1> INFO: 208000 events read in total (8946ms).
[11:12:51.886] <TB1> INFO: Test took 9780ms.
[11:12:52.116] <TB1> INFO: PixTestAlive::aliveTest() done
[11:12:52.116] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[11:12:52.117] <TB1> INFO: ----------------------------------------------------------------------
[11:12:52.117] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:12:52.117] <TB1> INFO: ----------------------------------------------------------------------
[11:12:52.397] <TB1> INFO: Expecting 208000 events.
[11:12:58.820] <TB1> INFO: 208000 events read in total (5867ms).
[11:12:58.821] <TB1> INFO: Test took 6703ms.
[11:12:58.821] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:12:59.021] <TB1> INFO: PixTestAlive::maskTest() done
[11:12:59.021] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:12:59.022] <TB1> INFO: ----------------------------------------------------------------------
[11:12:59.022] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:12:59.022] <TB1> INFO: ----------------------------------------------------------------------
[11:12:59.291] <TB1> INFO: Expecting 208000 events.
[11:13:08.711] <TB1> INFO: 208000 events read in total (8864ms).
[11:13:08.712] <TB1> INFO: Test took 9689ms.
[11:13:08.903] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:13:08.903] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:13:08.904] <TB1> INFO: PixTestAlive::doTest() done, duration: 26 seconds
[11:13:08.940] <TB1> INFO: enter test to run
[11:13:08.940] <TB1> INFO: test: delay setting parameters: ->2<-
[11:13:08.940] <TB1> INFO: delay test by 2 seconds...
[11:13:10.940] <TB1> INFO: enter test to run
[11:13:10.940] <TB1> INFO: test: HighRate no parameter change
[11:13:10.940] <TB1> INFO: running: highrate
[11:13:10.940] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//015_HREfficiency_125//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//015_HREfficiency_125//phCalibrationFitErr35_C15.dat
[11:13:11.111] <TB1> INFO: ----------------------------------------------------------------------
[11:13:11.111] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:13:11.111] <TB1> INFO: ----------------------------------------------------------------------
[11:13:11.607] <TB1> INFO: Expecting 208000 events.
[11:13:15.226] <TB1> ERROR: <datapipe.cc/CheckEventValidity:L523> Channel 3 Number of ROCs (5) != Token Chain Length (4)

[11:13:15.226] <TB1> ERROR: <datapipe.cc/Read:L170> Dumping the flawed event +- 3 events:

[11:13:15.226] <TB1> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a319 80c0 4071 5c 288c 289 2a47 4061 5c 2880 161 2468 29c 2049 284 2249 842 2642 4061 5c 2889 74c 244c 40e1 5c 2881 4d5 2066 61c 2449 e002 c000

[11:13:15.226] <TB1> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a313 8040 4070 5d 2088 6c2 266f 4061 5d 2084 4a 224a 4060 5d 20ac 44b 2444 4071 5d 208f 45a 2a49 e002 c000

[11:13:15.226] <TB1> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a314 80b0 4070 5d 208f d2 2444 64b 2448 4070 5d 20a4 2c1 2a65 4060 5d 208d 321 284f 41a 2a4f 509 2444 6c3 2a6a 6c4 2249 85b 264f 4060 5d 2089 40d 242f 699 2246 853 2241 e002 c000

[11:13:15.226] <TB1> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a315 80c0 4070 5d 20a4 55 2a49 4060 4070 5d 208f 609 2861 4070 5d 2085 84a 2241 e002 c000

[11:13:15.226] <TB1> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a316 8000 4070 8 202a 5 284d d 2666 5d 208f 24d 204f 34d 224f 4070 5d 208a 315 244d 761 264f 4070 5d 20a2 dd 2468 361 2881 4060 4061 ef8 2006 e002 c000

[11:13:15.226] <TB1> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a317 8040 4070 5d 2085 c4 2624 c4 2a2a 808 244e 4070 5d 208d d2 2862 842 2645 4060 5d 208f 40e0 5d 20a3 e002 c000

[11:13:15.226] <TB1> ERROR: <datapipe.cc/Read:L172> ====== 0 ====== a318 80b0 4071 5d 208f 442 2444 442 2061 4071 1b 284b 5d 20a1 254 204f 4071 5d 208f 655 2a44 740 2427 4061 5d 208d 762 226b e002 c000

[11:13:28.630] <TB1> INFO: 208000 events read in total (16622ms).
[11:13:28.641] <TB1> INFO: Test took 17527ms.
[11:13:29.697] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[11:13:29.697] <TB1> INFO: number of red-efficiency pixels: 596 852 931 1954 1374 2155 1992 1968 2094 1834 1560 1731 1158 807 576 699
[11:13:29.697] <TB1> INFO: number of X-ray hits detected: 253875 269634 269258 452687 410636 504670 510157 501361 505898 491361 452074 453354 387344 257294 264955 252888
[11:13:29.697] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:13:29.697] <TB1> INFO: number of Vcal hits detected: 207346 207012 206435 204866 206082 204278 204475 204964 204638 205007 205652 205332 206527 206549 207369 207194
[11:13:29.697] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.7 99.6 99.4 98.7 99.2 98.5 98.5 98.7 98.6 98.7 99.0 98.9 99.4 99.5 99.7 99.7
[11:13:29.697] <TB1> INFO: Vcal hit overall efficiency (%): 99.7 99.5 99.2 98.5 99.1 98.2 98.3 98.5 98.4 98.6 98.9 98.7 99.3 99.3 99.7 99.6
[11:13:29.697] <TB1> INFO: X-ray hit rate [MHz/cm2]: 74.4 79.0 78.9 132.7 120.4 147.9 149.5 147.0 148.3 144.0 132.5 132.9 113.5 75.4 77.7 74.1
[11:13:29.697] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:13:29.727] <TB1> INFO: PixTest:: pg_setup set to default.
[11:13:29.738] <TB1> INFO: enter test to run
[11:13:29.738] <TB1> INFO: test: no parameter change
[11:13:30.073] <TB1> QUIET: Connection to board 147 closed.
[11:13:30.153] <TB1> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[11:14:15.434] <TB1> INFO: *** Welcome to pxar ***
[11:14:15.434] <TB1> INFO: *** Today: 2016/10/05
[11:14:15.506] <TB1> INFO: *** Version: f5d3-dirty
[11:14:15.506] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//016_HREfficiency_150//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//016_HREfficiency_150//dacParameters35_C15.dat
[11:14:15.507] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//016_HREfficiency_150//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//016_HREfficiency_150//tbmParameters_C0b.dat
[11:14:15.507] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//016_HREfficiency_150//defaultMaskFile.dat
[11:14:15.507] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//016_HREfficiency_150//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//016_HREfficiency_150//trimParameters35_C15.dat
[11:14:15.579] <TB1> INFO: clk: 4
[11:14:15.579] <TB1> INFO: ctr: 4
[11:14:15.579] <TB1> INFO: sda: 19
[11:14:15.579] <TB1> INFO: tin: 9
[11:14:15.579] <TB1> INFO: level: 15
[11:14:15.579] <TB1> INFO: triggerdelay: 0
[11:14:15.579] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[11:14:15.579] <TB1> INFO: Log level: INFO
[11:14:15.592] <TB1> INFO: Found DTB DTB_WWXTQT
[11:14:15.602] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:14:15.604] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:14:15.606] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[11:14:17.148] <TB1> INFO: DUT info:
[11:14:17.148] <TB1> INFO: The DUT currently contains the following objects:
[11:14:17.148] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:14:17.148] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:14:17.148] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:14:17.148] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:14:17.148] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.148] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:14:17.549] <TB1> INFO: enter 'restricted' command line mode
[11:14:17.549] <TB1> INFO: enter test to run
[11:14:17.549] <TB1> INFO: test: PixelAlive no parameter change
[11:14:17.549] <TB1> INFO: running: pixelalive
[11:14:17.555] <TB1> INFO: ######################################################################
[11:14:17.555] <TB1> INFO: PixTestAlive::doTest()
[11:14:17.555] <TB1> INFO: ######################################################################
[11:14:17.556] <TB1> INFO: ----------------------------------------------------------------------
[11:14:17.556] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:14:17.556] <TB1> INFO: ----------------------------------------------------------------------
[11:14:17.819] <TB1> INFO: Expecting 208000 events.
[11:14:26.973] <TB1> INFO: 208000 events read in total (8596ms).
[11:14:26.974] <TB1> INFO: Test took 9416ms.
[11:14:27.207] <TB1> INFO: PixTestAlive::aliveTest() done
[11:14:27.207] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[11:14:27.209] <TB1> INFO: ----------------------------------------------------------------------
[11:14:27.209] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:14:27.209] <TB1> INFO: ----------------------------------------------------------------------
[11:14:27.483] <TB1> INFO: Expecting 208000 events.
[11:14:33.921] <TB1> INFO: 208000 events read in total (5882ms).
[11:14:33.922] <TB1> INFO: Test took 6711ms.
[11:14:33.922] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:14:34.127] <TB1> INFO: PixTestAlive::maskTest() done
[11:14:34.127] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:14:34.128] <TB1> INFO: ----------------------------------------------------------------------
[11:14:34.128] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:14:34.128] <TB1> INFO: ----------------------------------------------------------------------
[11:14:34.395] <TB1> INFO: Expecting 208000 events.
[11:14:43.653] <TB1> INFO: 208000 events read in total (8702ms).
[11:14:43.654] <TB1> INFO: Test took 9524ms.
[11:14:43.855] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:14:43.855] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:14:43.855] <TB1> INFO: PixTestAlive::doTest() done, duration: 26 seconds
[11:14:43.887] <TB1> INFO: enter test to run
[11:14:43.887] <TB1> INFO: test: delay setting parameters: ->2<-
[11:14:43.887] <TB1> INFO: delay test by 2 seconds...
[11:14:45.887] <TB1> INFO: enter test to run
[11:14:45.887] <TB1> INFO: test: HighRate no parameter change
[11:14:45.887] <TB1> INFO: running: highrate
[11:14:45.888] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//016_HREfficiency_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//016_HREfficiency_150//phCalibrationFitErr35_C15.dat
[11:14:46.026] <TB1> INFO: ----------------------------------------------------------------------
[11:14:46.026] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:14:46.026] <TB1> INFO: ----------------------------------------------------------------------
[11:14:46.510] <TB1> INFO: Expecting 208000 events.
[11:15:05.424] <TB1> INFO: 208000 events read in total (18513ms).
[11:15:05.435] <TB1> INFO: Test took 19406ms.
[11:15:06.665] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[11:15:06.665] <TB1> INFO: number of red-efficiency pixels: 822 1181 1190 2606 1916 2849 2666 2689 2749 2499 2200 2215 1672 1071 828 986
[11:15:06.665] <TB1> INFO: number of X-ray hits detected: 301859 323532 324509 538026 488870 598526 607082 596199 603742 583934 538190 539101 459412 307336 317388 302709
[11:15:06.665] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:15:06.665] <TB1> INFO: number of Vcal hits detected: 207054 206546 205564 202874 204887 201694 202104 202930 202415 202926 204114 203761 205602 205790 207061 206802
[11:15:06.665] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.6 99.4 99.1 97.8 98.7 97.4 97.6 97.8 97.6 97.9 98.4 98.3 99.0 99.2 99.6 99.5
[11:15:06.665] <TB1> INFO: Vcal hit overall efficiency (%): 99.5 99.3 98.8 97.5 98.5 97.0 97.2 97.6 97.3 97.6 98.1 98.0 98.8 98.9 99.5 99.4
[11:15:06.665] <TB1> INFO: X-ray hit rate [MHz/cm2]: 88.5 94.8 95.1 157.7 143.3 175.4 177.9 174.8 177.0 171.2 157.7 158.0 134.7 90.1 93.0 88.7
[11:15:06.665] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:15:06.695] <TB1> INFO: PixTest:: pg_setup set to default.
[11:15:06.707] <TB1> INFO: enter test to run
[11:15:06.707] <TB1> INFO: test: no parameter change
[11:15:07.031] <TB1> QUIET: Connection to board 147 closed.
[11:15:07.110] <TB1> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[11:15:52.426] <TB1> INFO: *** Welcome to pxar ***
[11:15:52.426] <TB1> INFO: *** Today: 2016/10/05
[11:15:52.495] <TB1> INFO: *** Version: f5d3-dirty
[11:15:52.495] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//017_HREfficiency_200//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//017_HREfficiency_200//dacParameters35_C15.dat
[11:15:52.496] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//017_HREfficiency_200//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//017_HREfficiency_200//tbmParameters_C0b.dat
[11:15:52.496] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//017_HREfficiency_200//defaultMaskFile.dat
[11:15:52.496] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//017_HREfficiency_200//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//017_HREfficiency_200//trimParameters35_C15.dat
[11:15:52.572] <TB1> INFO: clk: 4
[11:15:52.572] <TB1> INFO: ctr: 4
[11:15:52.572] <TB1> INFO: sda: 19
[11:15:52.572] <TB1> INFO: tin: 9
[11:15:52.572] <TB1> INFO: level: 15
[11:15:52.572] <TB1> INFO: triggerdelay: 0
[11:15:52.572] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[11:15:52.572] <TB1> INFO: Log level: INFO
[11:15:52.586] <TB1> INFO: Found DTB DTB_WWXTQT
[11:15:52.595] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:15:52.597] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:15:52.599] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[11:15:54.132] <TB1> INFO: DUT info:
[11:15:54.132] <TB1> INFO: The DUT currently contains the following objects:
[11:15:54.132] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:15:54.132] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:15:54.132] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:15:54.132] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:15:54.132] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.132] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.132] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.132] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.133] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.133] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.133] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.133] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.133] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.133] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.133] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.133] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.133] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.133] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.133] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.133] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:15:54.534] <TB1> INFO: enter 'restricted' command line mode
[11:15:54.534] <TB1> INFO: enter test to run
[11:15:54.534] <TB1> INFO: test: PixelAlive no parameter change
[11:15:54.534] <TB1> INFO: running: pixelalive
[11:15:54.541] <TB1> INFO: ######################################################################
[11:15:54.541] <TB1> INFO: PixTestAlive::doTest()
[11:15:54.541] <TB1> INFO: ######################################################################
[11:15:54.542] <TB1> INFO: ----------------------------------------------------------------------
[11:15:54.542] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:15:54.542] <TB1> INFO: ----------------------------------------------------------------------
[11:15:54.833] <TB1> INFO: Expecting 208000 events.
[11:16:04.347] <TB1> INFO: 208000 events read in total (8956ms).
[11:16:04.349] <TB1> INFO: Test took 9805ms.
[11:16:04.574] <TB1> INFO: PixTestAlive::aliveTest() done
[11:16:04.574] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[11:16:04.575] <TB1> INFO: ----------------------------------------------------------------------
[11:16:04.575] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:16:04.575] <TB1> INFO: ----------------------------------------------------------------------
[11:16:04.836] <TB1> INFO: Expecting 208000 events.
[11:16:11.395] <TB1> INFO: 208000 events read in total (6003ms).
[11:16:11.397] <TB1> INFO: Test took 6821ms.
[11:16:11.398] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:16:11.605] <TB1> INFO: PixTestAlive::maskTest() done
[11:16:11.605] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:16:11.606] <TB1> INFO: ----------------------------------------------------------------------
[11:16:11.606] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:16:11.606] <TB1> INFO: ----------------------------------------------------------------------
[11:16:11.864] <TB1> INFO: Expecting 208000 events.
[11:16:21.376] <TB1> INFO: 208000 events read in total (8956ms).
[11:16:21.376] <TB1> INFO: Test took 9769ms.
[11:16:21.579] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:16:21.579] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:16:21.580] <TB1> INFO: PixTestAlive::doTest() done, duration: 27 seconds
[11:16:21.628] <TB1> INFO: enter test to run
[11:16:21.628] <TB1> INFO: test: delay setting parameters: ->2<-
[11:16:21.628] <TB1> INFO: delay test by 2 seconds...
[11:16:23.629] <TB1> INFO: enter test to run
[11:16:23.629] <TB1> INFO: test: HighRate no parameter change
[11:16:23.629] <TB1> INFO: running: highrate
[11:16:23.629] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//017_HREfficiency_200//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//017_HREfficiency_200//phCalibrationFitErr35_C15.dat
[11:16:23.778] <TB1> INFO: ----------------------------------------------------------------------
[11:16:23.778] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:16:23.778] <TB1> INFO: ----------------------------------------------------------------------
[11:16:24.309] <TB1> INFO: Expecting 208000 events.
[11:16:48.103] <TB1> INFO: 208000 events read in total (23393ms).
[11:16:48.125] <TB1> INFO: Test took 24344ms.
[11:16:49.731] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[11:16:49.731] <TB1> INFO: number of red-efficiency pixels: 1498 2175 1871 3653 3033 3830 3714 3776 3832 3585 3410 3426 2880 1635 1482 1846
[11:16:49.731] <TB1> INFO: number of X-ray hits detected: 411694 439166 440685 724580 662340 804655 820303 800537 814136 790081 729227 731601 623273 420676 434574 412015
[11:16:49.731] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:16:49.731] <TB1> INFO: number of Vcal hits detected: 205955 204620 202381 195941 200388 193151 193707 195398 194121 195732 198291 197364 201930 203174 205982 205190
[11:16:49.731] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.1 98.5 97.8 94.9 96.8 93.7 94.0 94.6 94.0 94.8 95.9 95.6 97.4 98.2 99.1 98.8
[11:16:49.731] <TB1> INFO: Vcal hit overall efficiency (%): 99.0 98.4 97.3 94.2 96.3 92.9 93.1 93.9 93.3 94.1 95.3 94.9 97.1 97.7 99.0 98.6
[11:16:49.731] <TB1> INFO: X-ray hit rate [MHz/cm2]: 120.7 128.7 129.2 212.4 194.1 235.9 240.4 234.6 238.6 231.6 213.7 214.4 182.7 123.3 127.4 120.8
[11:16:49.731] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:16:49.761] <TB1> INFO: PixTest:: pg_setup set to default.
[11:16:49.773] <TB1> INFO: enter test to run
[11:16:49.773] <TB1> INFO: test: no parameter change
[11:16:50.044] <TB1> QUIET: Connection to board 147 closed.
[11:16:50.124] <TB1> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[11:17:36.082] <TB1> INFO: *** Welcome to pxar ***
[11:17:36.082] <TB1> INFO: *** Today: 2016/10/05
[11:17:36.148] <TB1> INFO: *** Version: f5d3-dirty
[11:17:36.148] <TB1> INFO: readRocDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//018_HREfficiency_250//dacParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//018_HREfficiency_250//dacParameters35_C15.dat
[11:17:36.149] <TB1> INFO: readTbmDacs: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//018_HREfficiency_250//tbmParameters_C0a.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//018_HREfficiency_250//tbmParameters_C0b.dat
[11:17:36.149] <TB1> INFO: readMaskFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//018_HREfficiency_250//defaultMaskFile.dat
[11:17:36.149] <TB1> INFO: readTrimFile: /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//018_HREfficiency_250//trimParameters35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//018_HREfficiency_250//trimParameters35_C15.dat
[11:17:36.225] <TB1> INFO: clk: 4
[11:17:36.225] <TB1> INFO: ctr: 4
[11:17:36.225] <TB1> INFO: sda: 19
[11:17:36.225] <TB1> INFO: tin: 9
[11:17:36.225] <TB1> INFO: level: 15
[11:17:36.225] <TB1> INFO: triggerdelay: 0
[11:17:36.225] <TB1> QUIET: Instanciating API for pxar v2.7.6+55~gafdbfd9
[11:17:36.225] <TB1> INFO: Log level: INFO
[11:17:36.239] <TB1> INFO: Found DTB DTB_WWXTQT
[11:17:36.248] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:17:36.250] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.6
SW version: 4.7
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:17:36.252] <TB1> INFO: RPC call hashes of host and DTB match: 486171790
[11:17:37.787] <TB1> INFO: DUT info:
[11:17:37.787] <TB1> INFO: The DUT currently contains the following objects:
[11:17:37.788] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:17:37.788] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:17:37.788] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:17:37.788] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:17:37.788] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:37.788] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:17:38.188] <TB1> INFO: enter 'restricted' command line mode
[11:17:38.188] <TB1> INFO: enter test to run
[11:17:38.189] <TB1> INFO: test: PixelAlive no parameter change
[11:17:38.189] <TB1> INFO: running: pixelalive
[11:17:38.192] <TB1> INFO: ######################################################################
[11:17:38.192] <TB1> INFO: PixTestAlive::doTest()
[11:17:38.192] <TB1> INFO: ######################################################################
[11:17:38.193] <TB1> INFO: ----------------------------------------------------------------------
[11:17:38.193] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:17:38.193] <TB1> INFO: ----------------------------------------------------------------------
[11:17:38.454] <TB1> INFO: Expecting 208000 events.
[11:17:47.546] <TB1> INFO: 208000 events read in total (8534ms).
[11:17:47.548] <TB1> INFO: Test took 9354ms.
[11:17:47.772] <TB1> INFO: PixTestAlive::aliveTest() done
[11:17:47.772] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[11:17:47.773] <TB1> INFO: ----------------------------------------------------------------------
[11:17:47.773] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:17:47.773] <TB1> INFO: ----------------------------------------------------------------------
[11:17:48.061] <TB1> INFO: Expecting 208000 events.
[11:17:54.468] <TB1> INFO: 208000 events read in total (5850ms).
[11:17:54.522] <TB1> INFO: Test took 6747ms.
[11:17:54.523] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:17:54.705] <TB1> INFO: PixTestAlive::maskTest() done
[11:17:54.705] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:17:54.706] <TB1> INFO: ----------------------------------------------------------------------
[11:17:54.706] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:17:54.706] <TB1> INFO: ----------------------------------------------------------------------
[11:17:54.972] <TB1> INFO: Expecting 208000 events.
[11:18:04.256] <TB1> INFO: 208000 events read in total (8728ms).
[11:18:04.259] <TB1> INFO: Test took 9551ms.
[11:18:04.457] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:18:04.457] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:18:04.457] <TB1> INFO: PixTestAlive::doTest() done, duration: 26 seconds
[11:18:04.488] <TB1> INFO: enter test to run
[11:18:04.488] <TB1> INFO: test: delay setting parameters: ->2<-
[11:18:04.488] <TB1> INFO: delay test by 2 seconds...
[11:18:06.488] <TB1> INFO: enter test to run
[11:18:06.489] <TB1> INFO: test: HighRate no parameter change
[11:18:06.489] <TB1> INFO: running: highrate
[11:18:06.489] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//018_HREfficiency_250//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2349_XrayQualification_2016-10-05_12h02m_1475661724//018_HREfficiency_250//phCalibrationFitErr35_C15.dat
[11:18:06.645] <TB1> INFO: ----------------------------------------------------------------------
[11:18:06.645] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:18:06.645] <TB1> INFO: ----------------------------------------------------------------------
[11:18:07.133] <TB1> INFO: Expecting 208000 events.
[11:18:35.864] <TB1> INFO: 199850 events read in total (28329ms).
[11:18:37.241] <TB1> INFO: 208000 events read in total (29706ms).
[11:18:37.259] <TB1> INFO: Test took 30611ms.
[11:18:39.296] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0
[11:18:39.296] <TB1> INFO: number of red-efficiency pixels: 2235 3031 2398 4032 3787 4110 4085 4106 4111 4069 3981 3949 3574 2054 2366 2653
[11:18:39.296] <TB1> INFO: number of X-ray hits detected: 508368 544222 545093 893877 819863 996518 1014858 992722 1006284 973726 900147 903264 770214 521367 536177 511455
[11:18:39.296] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:18:39.296] <TB1> INFO: number of Vcal hits detected: 204253 201699 197922 186439 193662 181530 181946 184311 182477 185420 189804 188392 196401 199507 204092 202907
[11:18:39.296] <TB1> INFO: Vcal hit fiducial efficiency (%): 98.4 97.2 95.9 90.7 93.9 88.5 88.8 89.6 88.7 90.3 92.2 91.6 95.0 96.7 98.3 97.8
[11:18:39.296] <TB1> INFO: Vcal hit overall efficiency (%): 98.2 97.0 95.2 89.6 93.1 87.3 87.5 88.6 87.7 89.1 91.3 90.6 94.4 95.9 98.1 97.6
[11:18:39.296] <TB1> INFO: X-ray hit rate [MHz/cm2]: 149.0 159.5 159.8 262.0 240.3 292.1 297.5 291.0 294.9 285.4 263.8 264.8 225.8 152.8 157.2 149.9
[11:18:39.296] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:18:39.326] <TB1> INFO: PixTest:: pg_setup set to default.
[11:18:39.341] <TB1> INFO: enter test to run
[11:18:39.341] <TB1> INFO: test: no parameter change
[11:18:39.656] <TB1> QUIET: Connection to board 147 closed.
[11:18:39.737] <TB1> INFO: pXar: this is the end, my friend
MoReWeb-v1.0.4-4-g297680c on branch psi46master