[10:36:21.886] <TB1> INFO: *** Welcome to pxar ***
[10:36:21.886] <TB1> INFO: *** Today: 2016/02/09
[10:36:22.028] <TB1> INFO: *** Version: 9751
[10:36:22.028] <TB1> INFO: readRocDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//000_PixelAlive_p17//dacParameters35_C15.dat
[10:36:22.029] <TB1> INFO: readTbmDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//000_PixelAlive_p17//tbmParameters_C0b.dat
[10:36:22.029] <TB1> INFO: readMaskFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//000_PixelAlive_p17//defaultMaskFile.dat
[10:36:22.029] <TB1> INFO: readTrimFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//000_PixelAlive_p17//trimParameters35_C15.dat
[10:36:22.098] <TB1> INFO: clk: 4
[10:36:22.098] <TB1> INFO: ctr: 4
[10:36:22.098] <TB1> INFO: sda: 19
[10:36:22.098] <TB1> INFO: tin: 9
[10:36:22.098] <TB1> INFO: level: 15
[10:36:22.098] <TB1> INFO: triggerdelay: 0
[10:36:22.098] <TB1> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:36:22.098] <TB1> INFO: Log level: INFO
[10:36:22.111] <TB1> INFO: Found DTB DTB_WWXTQT
[10:36:22.127] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:36:22.129] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:36:22.131] <TB1> INFO: RPC call hashes of host and DTB match: 484264910
[10:36:23.666] <TB1> INFO: DUT info:
[10:36:23.666] <TB1> INFO: The DUT currently contains the following objects:
[10:36:23.666] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:36:23.666] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:36:23.666] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:36:23.666] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:36:23.666] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.666] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.666] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.666] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.666] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.666] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.666] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.666] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.666] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.666] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.666] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.666] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.666] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.666] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.666] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:23.667] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:24.067] <TB1> INFO: enter 'restricted' command line mode
[10:36:24.067] <TB1> INFO: enter test to run
[10:36:24.067] <TB1> INFO: test: PixelAlive no parameter change
[10:36:24.067] <TB1> INFO: running: pixelalive
[10:36:24.071] <TB1> INFO: ######################################################################
[10:36:24.071] <TB1> INFO: PixTestAlive::doTest()
[10:36:24.071] <TB1> INFO: ######################################################################
[10:36:24.072] <TB1> INFO: ----------------------------------------------------------------------
[10:36:24.072] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:36:24.072] <TB1> INFO: ----------------------------------------------------------------------
[10:36:24.343] <TB1> INFO: Expecting 41600 events.
[10:36:28.111] <TB1> INFO: 41600 events read in total (3210ms).
[10:36:28.160] <TB1> INFO: Test took 4087ms.
[10:36:28.382] <TB1> INFO: PixTestAlive::aliveTest() done
[10:36:28.382] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 1 0 0 0 0
[10:36:28.383] <TB1> INFO: ----------------------------------------------------------------------
[10:36:28.383] <TB1> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:36:28.383] <TB1> INFO: ----------------------------------------------------------------------
[10:36:28.640] <TB1> INFO: Expecting 41600 events.
[10:36:31.577] <TB1> INFO: 41600 events read in total (2381ms).
[10:36:31.577] <TB1> INFO: Test took 3193ms.
[10:36:31.578] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:36:31.825] <TB1> INFO: PixTestAlive::maskTest() done
[10:36:31.825] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:36:31.826] <TB1> INFO: ----------------------------------------------------------------------
[10:36:31.826] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:36:31.826] <TB1> INFO: ----------------------------------------------------------------------
[10:36:32.087] <TB1> INFO: Expecting 41600 events.
[10:36:35.883] <TB1> INFO: 41600 events read in total (3239ms).
[10:36:35.884] <TB1> INFO: Test took 4057ms.
[10:36:36.108] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[10:36:36.108] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:36:36.108] <TB1> INFO: PixTestAlive::doTest() done, duration: 12 seconds
[10:36:36.159] <TB1> INFO: enter test to run
[10:36:36.159] <TB1> INFO: test: no parameter change
[10:36:36.355] <TB1> QUIET: Connection to board 147 closed.
[10:36:36.434] <TB1> INFO: pXar: this is the end, my friend

[10:41:46.133] <TB1> INFO: *** Welcome to pxar ***
[10:41:46.133] <TB1> INFO: *** Today: 2016/02/09
[10:41:46.384] <TB1> INFO: *** Version: 9751
[10:41:46.384] <TB1> INFO: readRocDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//dacParameters35_C15.dat
[10:41:46.385] <TB1> INFO: readTbmDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[10:41:46.385] <TB1> INFO: readMaskFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//defaultMaskFile.dat
[10:41:46.385] <TB1> INFO: readTrimFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C15.dat
[10:41:46.455] <TB1> INFO: clk: 4
[10:41:46.455] <TB1> INFO: ctr: 4
[10:41:46.455] <TB1> INFO: sda: 19
[10:41:46.455] <TB1> INFO: tin: 9
[10:41:46.455] <TB1> INFO: level: 15
[10:41:46.455] <TB1> INFO: triggerdelay: 0
[10:41:46.455] <TB1> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:41:46.455] <TB1> INFO: Log level: INFO
[10:41:46.468] <TB1> INFO: Found DTB DTB_WWXTQT
[10:41:46.482] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:41:46.484] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:41:46.486] <TB1> INFO: RPC call hashes of host and DTB match: 484264910
[10:41:48.072] <TB1> INFO: DUT info:
[10:41:48.072] <TB1> INFO: The DUT currently contains the following objects:
[10:41:48.072] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:41:48.072] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:41:48.072] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:41:48.072] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:41:48.072] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.072] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:41:48.473] <TB1> INFO: enter 'restricted' command line mode
[10:41:48.473] <TB1> INFO: enter test to run
[10:41:48.473] <TB1> INFO: test: delay setting parameters: ->5<-
[10:41:48.473] <TB1> INFO: delay test by 5 seconds...
[10:41:53.473] <TB1> INFO: enter test to run
[10:41:53.473] <TB1> INFO: test: highrate no parameter change
[10:41:53.473] <TB1> INFO: running: highrate
[10:41:53.474] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[10:41:53.630] <TB1> INFO: ----------------------------------------------------------------------
[10:41:53.630] <TB1> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[10:41:53.630] <TB1> INFO: ----------------------------------------------------------------------
[10:41:53.630] <TB1> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[10:41:53.630] <TB1> INFO: edge/corner pixel THR is adjusted
[10:41:53.630] <TB1> INFO: PixTestHighRate::trimHotPixels: step 0...
[10:41:54.348] <TB1> INFO: Collecting data for 1 seconds...
[10:41:55.349] <TB1> INFO: Done with hot pixel readout
[10:42:03.087] <TB1> INFO: PixTest:: pg_setup set to default.
[10:42:03.088] <TB1> INFO: 1 hot pixels found in step 0
[10:42:03.811] <TB1> INFO: Collecting data for 1 seconds...
[10:42:04.813] <TB1> INFO: Done with hot pixel readout
[10:42:12.543] <TB1> INFO: PixTest:: pg_setup set to default.
[10:42:12.544] <TB1> INFO: 1 hot pixels found in step 1
[10:42:13.266] <TB1> INFO: Collecting data for 1 seconds...
[10:42:14.267] <TB1> INFO: Done with hot pixel readout
[10:42:22.030] <TB1> INFO: PixTest:: pg_setup set to default.
[10:42:22.031] <TB1> INFO: 1 hot pixels found in step 2
[10:42:22.752] <TB1> INFO: Collecting data for 1 seconds...
[10:42:23.753] <TB1> INFO: Done with hot pixel readout
[10:42:31.392] <TB1> INFO: PixTest:: pg_setup set to default.
[10:42:31.393] <TB1> INFO: 0 hot pixels found in step 3
[10:42:31.403] <TB1> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[10:42:31.433] <TB1> INFO: PixTest::trimHotPixels() done
[10:42:31.433] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C0.dat
[10:42:31.439] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C1.dat
[10:42:31.446] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C2.dat
[10:42:31.453] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C3.dat
[10:42:31.459] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C4.dat
[10:42:31.465] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C5.dat
[10:42:31.472] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C6.dat
[10:42:31.478] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C7.dat
[10:42:31.484] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C8.dat
[10:42:31.490] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C9.dat
[10:42:31.496] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C10.dat
[10:42:31.503] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C11.dat
[10:42:31.509] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C12.dat
[10:42:31.515] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C13.dat
[10:42:31.521] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C14.dat
[10:42:31.527] <TB1> INFO: write trim parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//trimParameters35_C15.dat
[10:42:31.533] <TB1> INFO: write masked pixels into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//002_RetrimHotPixels_150//defaultMaskFile.dat
[10:42:31.564] <TB1> INFO: enter test to run
[10:42:31.564] <TB1> INFO: test: no parameter change
[10:42:31.720] <TB1> QUIET: Connection to board 147 closed.
[10:42:31.800] <TB1> INFO: pXar: this is the end, my friend

[10:43:04.303] <TB1> INFO: *** Welcome to pxar ***
[10:43:04.303] <TB1> INFO: *** Today: 2016/02/09
[10:43:04.509] <TB1> INFO: *** Version: 9751
[10:43:04.509] <TB1> INFO: readRocDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//dacParameters35_C15.dat
[10:43:04.510] <TB1> INFO: readTbmDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//tbmParameters_C0b.dat
[10:43:04.510] <TB1> INFO: readMaskFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//defaultMaskFile.dat
[10:43:04.510] <TB1> INFO: readTrimFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//trimParameters35_C15.dat
[10:43:04.586] <TB1> INFO: clk: 4
[10:43:04.586] <TB1> INFO: ctr: 4
[10:43:04.586] <TB1> INFO: sda: 19
[10:43:04.586] <TB1> INFO: tin: 9
[10:43:04.586] <TB1> INFO: level: 15
[10:43:04.586] <TB1> INFO: triggerdelay: 0
[10:43:04.586] <TB1> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:43:04.586] <TB1> INFO: Log level: INFO
[10:43:04.599] <TB1> INFO: Found DTB DTB_WWXTQT
[10:43:04.615] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:43:04.617] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:43:04.619] <TB1> INFO: RPC call hashes of host and DTB match: 484264910
[10:43:06.188] <TB1> INFO: DUT info:
[10:43:06.188] <TB1> INFO: The DUT currently contains the following objects:
[10:43:06.188] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:43:06.188] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:43:06.188] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:43:06.188] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:43:06.188] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.188] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.189] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.189] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.189] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.189] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.189] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.189] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.189] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.189] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.189] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.189] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.189] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.189] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.189] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.189] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:43:06.590] <TB1> INFO: enter 'restricted' command line mode
[10:43:06.590] <TB1> INFO: enter test to run
[10:43:06.590] <TB1> INFO: test: delay setting parameters: ->5<-
[10:43:06.590] <TB1> INFO: delay test by 5 seconds...
[10:43:11.590] <TB1> INFO: enter test to run
[10:43:11.590] <TB1> INFO: test: Xray no parameter change
[10:43:11.590] <TB1> INFO: running: xray
[10:43:11.591] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//003_HRData_50//phCalibrationFitErr35_C15.dat
[10:43:11.836] <TB1> INFO: ######################################################################
[10:43:11.836] <TB1> INFO: PixTestXray::doTest()
[10:43:11.836] <TB1> INFO: ######################################################################
[10:43:11.836] <TB1> INFO: ----------------------------------------------------------------------
[10:43:11.836] <TB1> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[10:43:11.836] <TB1> INFO: ----------------------------------------------------------------------
[10:43:12.562] <TB1> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[10:43:18.564] <TB1> INFO: run duration 5 seconds, buffer almost full (81%), pausing triggers.
[10:43:47.588] <TB1> INFO: Resuming triggers.
[10:43:53.598] <TB1> INFO: run duration 12 seconds, buffer almost full (81%), pausing triggers.
[10:44:22.691] <TB1> INFO: Resuming triggers.
[10:44:28.698] <TB1> INFO: run duration 18 seconds, buffer almost full (81%), pausing triggers.
[10:44:57.935] <TB1> INFO: Resuming triggers.
[10:45:03.943] <TB1> INFO: run duration 24 seconds, buffer almost full (81%), pausing triggers.
[10:45:32.809] <TB1> INFO: Resuming triggers.
[10:45:38.815] <TB1> INFO: run duration 30 seconds, buffer almost full (81%), pausing triggers.
[10:46:07.370] <TB1> INFO: Resuming triggers.
[10:46:13.379] <TB1> INFO: run duration 36 seconds, buffer almost full (81%), pausing triggers.
[10:46:41.794] <TB1> INFO: Resuming triggers.
[10:46:47.798] <TB1> INFO: run duration 42 seconds, buffer almost full (81%), pausing triggers.
[10:47:17.082] <TB1> INFO: Resuming triggers.
[10:47:23.082] <TB1> INFO: run duration 48 seconds, buffer almost full (81%), pausing triggers.
[10:47:52.363] <TB1> INFO: Resuming triggers.
[10:47:58.361] <TB1> INFO: run duration 53 seconds, buffer almost full (81%), pausing triggers.
[10:48:27.261] <TB1> INFO: Resuming triggers.
[10:48:33.258] <TB1> INFO: run duration 59 seconds, buffer almost full (81%), pausing triggers.
[10:49:02.778] <TB1> INFO: Resuming triggers.
[10:49:08.770] <TB1> INFO: run duration 65 seconds, buffer almost full (81%), pausing triggers.
[10:49:37.717] <TB1> INFO: Resuming triggers.
[10:49:43.710] <TB1> INFO: run duration 71 seconds, buffer almost full (81%), pausing triggers.
[10:50:12.889] <TB1> INFO: Resuming triggers.
[10:50:18.878] <TB1> INFO: run duration 77 seconds, buffer almost full (81%), pausing triggers.
[10:50:49.031] <TB1> INFO: Resuming triggers.
[10:50:55.028] <TB1> INFO: run duration 83 seconds, buffer almost full (81%), pausing triggers.
[10:51:24.053] <TB1> INFO: Resuming triggers.
[10:51:30.046] <TB1> INFO: run duration 89 seconds, buffer almost full (81%), pausing triggers.
[10:51:58.594] <TB1> INFO: Resuming triggers.
[10:52:04.595] <TB1> INFO: run duration 95 seconds, buffer almost full (81%), pausing triggers.
[10:52:33.424] <TB1> INFO: Resuming triggers.
[10:52:37.511] <TB1> INFO: data taking finished, elapsed time: 100 seconds.
[10:52:56.330] <TB1> INFO: PixTest:: pg_setup set to default.
[10:52:56.331] <TB1> INFO: PixTestXray::doPhRun() done
[10:52:56.331] <TB1> INFO: PixTestXray::doTest() done
[10:52:56.504] <TB1> INFO: enter test to run
[10:52:56.504] <TB1> INFO: test: no parameter change
[10:52:56.775] <TB1> QUIET: Connection to board 147 closed.
[10:52:56.855] <TB1> INFO: pXar: this is the end, my friend

[10:53:13.486] <TB1> INFO: *** Welcome to pxar ***
[10:53:13.486] <TB1> INFO: *** Today: 2016/02/09
[10:53:13.550] <TB1> INFO: *** Version: 9751
[10:53:13.550] <TB1> INFO: readRocDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//dacParameters35_C15.dat
[10:53:13.550] <TB1> INFO: readTbmDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//tbmParameters_C0b.dat
[10:53:13.550] <TB1> INFO: readMaskFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//defaultMaskFile.dat
[10:53:13.551] <TB1> INFO: readTrimFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//trimParameters35_C15.dat
[10:53:13.626] <TB1> INFO: clk: 4
[10:53:13.626] <TB1> INFO: ctr: 4
[10:53:13.626] <TB1> INFO: sda: 19
[10:53:13.626] <TB1> INFO: tin: 9
[10:53:13.626] <TB1> INFO: level: 15
[10:53:13.626] <TB1> INFO: triggerdelay: 0
[10:53:13.626] <TB1> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:53:13.626] <TB1> INFO: Log level: INFO
[10:53:13.640] <TB1> INFO: Found DTB DTB_WWXTQT
[10:53:13.656] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[10:53:13.658] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[10:53:13.659] <TB1> INFO: RPC call hashes of host and DTB match: 484264910
[10:53:15.239] <TB1> INFO: DUT info:
[10:53:15.239] <TB1> INFO: The DUT currently contains the following objects:
[10:53:15.239] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[10:53:15.239] <TB1> INFO: TBM Core alpha (0): 7 registers set
[10:53:15.239] <TB1> INFO: TBM Core beta (1): 7 registers set
[10:53:15.239] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:53:15.239] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.239] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:53:15.641] <TB1> INFO: enter 'restricted' command line mode
[10:53:15.641] <TB1> INFO: enter test to run
[10:53:15.641] <TB1> INFO: test: delay setting parameters: ->5<-
[10:53:15.641] <TB1> INFO: delay test by 5 seconds...
[10:53:20.641] <TB1> INFO: enter test to run
[10:53:20.641] <TB1> INFO: test: Xray no parameter change
[10:53:20.641] <TB1> INFO: running: xray
[10:53:20.641] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//004_HRData_150//phCalibrationFitErr35_C15.dat
[10:53:20.786] <TB1> INFO: ######################################################################
[10:53:20.786] <TB1> INFO: PixTestXray::doTest()
[10:53:20.786] <TB1> INFO: ######################################################################
[10:53:20.786] <TB1> INFO: ----------------------------------------------------------------------
[10:53:20.786] <TB1> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[10:53:20.786] <TB1> INFO: ----------------------------------------------------------------------
[10:53:21.509] <TB1> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[10:53:24.668] <TB1> INFO: run duration 3 seconds, buffer almost full (81%), pausing triggers.
[10:53:53.441] <TB1> INFO: Resuming triggers.
[10:53:56.609] <TB1> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[10:54:26.189] <TB1> INFO: Resuming triggers.
[10:54:29.360] <TB1> INFO: run duration 9 seconds, buffer almost full (81%), pausing triggers.
[10:54:59.192] <TB1> INFO: Resuming triggers.
[10:55:02.360] <TB1> INFO: run duration 12 seconds, buffer almost full (81%), pausing triggers.
[10:55:32.420] <TB1> INFO: Resuming triggers.
[10:55:35.588] <TB1> INFO: run duration 15 seconds, buffer almost full (81%), pausing triggers.
[10:56:05.235] <TB1> INFO: Resuming triggers.
[10:56:08.400] <TB1> INFO: run duration 18 seconds, buffer almost full (81%), pausing triggers.
[10:56:37.964] <TB1> INFO: Resuming triggers.
[10:56:41.130] <TB1> INFO: run duration 22 seconds, buffer almost full (81%), pausing triggers.
[10:57:11.105] <TB1> INFO: Resuming triggers.
[10:57:14.266] <TB1> INFO: run duration 25 seconds, buffer almost full (81%), pausing triggers.
[10:57:43.819] <TB1> INFO: Resuming triggers.
[10:57:46.982] <TB1> INFO: run duration 28 seconds, buffer almost full (81%), pausing triggers.
[10:58:16.489] <TB1> INFO: Resuming triggers.
[10:58:19.652] <TB1> INFO: run duration 31 seconds, buffer almost full (81%), pausing triggers.
[10:58:49.503] <TB1> INFO: Resuming triggers.
[10:58:52.666] <TB1> INFO: run duration 34 seconds, buffer almost full (81%), pausing triggers.
[10:59:21.923] <TB1> INFO: Resuming triggers.
[10:59:25.085] <TB1> INFO: run duration 37 seconds, buffer almost full (81%), pausing triggers.
[10:59:53.382] <TB1> INFO: Resuming triggers.
[10:59:56.541] <TB1> INFO: run duration 41 seconds, buffer almost full (81%), pausing triggers.
[11:00:25.235] <TB1> INFO: Resuming triggers.
[11:00:28.397] <TB1> INFO: run duration 44 seconds, buffer almost full (81%), pausing triggers.
[11:00:57.357] <TB1> INFO: Resuming triggers.
[11:01:00.515] <TB1> INFO: run duration 47 seconds, buffer almost full (81%), pausing triggers.
[11:01:29.230] <TB1> INFO: Resuming triggers.
[11:01:32.390] <TB1> INFO: run duration 50 seconds, buffer almost full (81%), pausing triggers.
[11:02:01.424] <TB1> INFO: Resuming triggers.
[11:02:04.584] <TB1> INFO: run duration 53 seconds, buffer almost full (81%), pausing triggers.
[11:02:33.435] <TB1> INFO: Resuming triggers.
[11:02:36.595] <TB1> INFO: run duration 56 seconds, buffer almost full (81%), pausing triggers.
[11:03:05.412] <TB1> INFO: Resuming triggers.
[11:03:08.565] <TB1> INFO: run duration 60 seconds, buffer almost full (81%), pausing triggers.
[11:03:37.410] <TB1> INFO: Resuming triggers.
[11:03:40.566] <TB1> INFO: run duration 63 seconds, buffer almost full (81%), pausing triggers.
[11:04:10.013] <TB1> INFO: Resuming triggers.
[11:04:13.167] <TB1> INFO: run duration 66 seconds, buffer almost full (81%), pausing triggers.
[11:04:42.052] <TB1> INFO: Resuming triggers.
[11:04:45.207] <TB1> INFO: run duration 69 seconds, buffer almost full (81%), pausing triggers.
[11:05:14.279] <TB1> INFO: Resuming triggers.
[11:05:17.434] <TB1> INFO: run duration 72 seconds, buffer almost full (81%), pausing triggers.
[11:05:46.841] <TB1> INFO: Resuming triggers.
[11:05:49.996] <TB1> INFO: run duration 75 seconds, buffer almost full (81%), pausing triggers.
[11:06:19.618] <TB1> INFO: Resuming triggers.
[11:06:22.772] <TB1> INFO: run duration 78 seconds, buffer almost full (81%), pausing triggers.
[11:06:52.347] <TB1> INFO: Resuming triggers.
[11:06:55.499] <TB1> INFO: run duration 82 seconds, buffer almost full (81%), pausing triggers.
[11:07:24.893] <TB1> INFO: Resuming triggers.
[11:07:28.046] <TB1> INFO: run duration 85 seconds, buffer almost full (81%), pausing triggers.
[11:07:55.948] <TB1> INFO: Resuming triggers.
[11:07:59.101] <TB1> INFO: run duration 88 seconds, buffer almost full (81%), pausing triggers.
[11:08:26.265] <TB1> INFO: Resuming triggers.
[11:08:29.413] <TB1> INFO: run duration 91 seconds, buffer almost full (81%), pausing triggers.
[11:08:57.593] <TB1> INFO: Resuming triggers.
[11:09:00.744] <TB1> INFO: run duration 94 seconds, buffer almost full (81%), pausing triggers.
[11:09:29.076] <TB1> INFO: Resuming triggers.
[11:09:32.231] <TB1> INFO: run duration 97 seconds, buffer almost full (81%), pausing triggers.
[11:10:00.835] <TB1> INFO: Resuming triggers.
[11:10:02.991] <TB1> INFO: data taking finished, elapsed time: 100 seconds.
[11:10:21.124] <TB1> INFO: PixTest:: pg_setup set to default.
[11:10:21.126] <TB1> INFO: PixTestXray::doPhRun() done
[11:10:21.126] <TB1> INFO: PixTestXray::doTest() done
[11:10:21.305] <TB1> INFO: enter test to run
[11:10:21.305] <TB1> INFO: test: no parameter change
[11:10:21.480] <TB1> QUIET: Connection to board 147 closed.
[11:10:21.561] <TB1> INFO: pXar: this is the end, my friend

[11:10:36.295] <TB1> INFO: *** Welcome to pxar ***
[11:10:36.295] <TB1> INFO: *** Today: 2016/02/09
[11:10:36.350] <TB1> INFO: *** Version: 9751
[11:10:36.350] <TB1> INFO: readRocDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//dacParameters35_C15.dat
[11:10:36.350] <TB1> INFO: readTbmDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//tbmParameters_C0b.dat
[11:10:36.350] <TB1> INFO: readMaskFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//defaultMaskFile.dat
[11:10:36.350] <TB1> INFO: readTrimFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//trimParameters35_C15.dat
[11:10:36.420] <TB1> INFO: clk: 4
[11:10:36.420] <TB1> INFO: ctr: 4
[11:10:36.420] <TB1> INFO: sda: 19
[11:10:36.420] <TB1> INFO: tin: 9
[11:10:36.420] <TB1> INFO: level: 15
[11:10:36.420] <TB1> INFO: triggerdelay: 0
[11:10:36.420] <TB1> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[11:10:36.420] <TB1> INFO: Log level: INFO
[11:10:36.433] <TB1> INFO: Found DTB DTB_WWXTQT
[11:10:36.448] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:10:36.450] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:10:36.451] <TB1> INFO: RPC call hashes of host and DTB match: 484264910
[11:10:38.001] <TB1> INFO: DUT info:
[11:10:38.001] <TB1> INFO: The DUT currently contains the following objects:
[11:10:38.001] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:10:38.001] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:10:38.001] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:10:38.001] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:10:38.001] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.001] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.002] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.002] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.002] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.002] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.002] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.002] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.002] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.002] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.002] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.002] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.002] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.002] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.002] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.002] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:10:38.402] <TB1> INFO: enter 'restricted' command line mode
[11:10:38.402] <TB1> INFO: enter test to run
[11:10:38.402] <TB1> INFO: test: Highrate no parameter change
[11:10:38.402] <TB1> INFO: running: highrate
[11:10:38.403] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//005_HRSCurves_100//phCalibrationFitErr35_C15.dat
[11:10:38.590] <TB1> INFO: ----------------------------------------------------------------------
[11:10:38.590] <TB1> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[11:10:38.590] <TB1> INFO: ----------------------------------------------------------------------
[11:10:38.595] <TB1> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 15 .. 75 (20/-1) hits flags = 896 (plus default)
[11:10:38.609] <TB1> INFO: dacScan step from 15 .. 34
[11:10:38.610] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[11:10:38.610] <TB1> INFO: run 1 of 1
[11:10:39.148] <TB1> INFO: Expecting 4160000 events.
[11:11:14.195] <TB1> INFO: 412350 events read in total (34643ms).
[11:11:48.300] <TB1> INFO: 825700 events read in total (68748ms).
[11:12:22.339] <TB1> INFO: 1239400 events read in total (102787ms).
[11:12:56.458] <TB1> INFO: 1652700 events read in total (136906ms).
[11:13:30.265] <TB1> INFO: 2066100 events read in total (170713ms).
[11:14:04.480] <TB1> INFO: 2479400 events read in total (204928ms).
[11:14:38.400] <TB1> INFO: 2892200 events read in total (238848ms).
[11:15:12.323] <TB1> INFO: 3305050 events read in total (272771ms).
[11:15:46.270] <TB1> INFO: 3717750 events read in total (306718ms).
[11:16:20.135] <TB1> INFO: 4130350 events read in total (340583ms).
[11:16:23.254] <TB1> INFO: 4160000 events read in total (343702ms).
[11:16:23.465] <TB1> INFO: Test took 344855ms.
[11:16:33.894] <TB1> INFO: dacScan step from 35 .. 54
[11:16:33.894] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[11:16:33.894] <TB1> INFO: run 1 of 1
[11:16:34.386] <TB1> INFO: Expecting 4160000 events.
[11:17:07.033] <TB1> INFO: 353150 events read in total (32230ms).
[11:17:39.562] <TB1> INFO: 706550 events read in total (64759ms).
[11:18:11.825] <TB1> INFO: 1059450 events read in total (97022ms).
[11:18:44.223] <TB1> INFO: 1411050 events read in total (129420ms).
[11:19:17.275] <TB1> INFO: 1761950 events read in total (162472ms).
[11:19:50.257] <TB1> INFO: 2111950 events read in total (195454ms).
[11:20:23.003] <TB1> INFO: 2459750 events read in total (228200ms).
[11:20:55.714] <TB1> INFO: 2805400 events read in total (260911ms).
[11:21:35.277] <TB1> INFO: 3148350 events read in total (300474ms).
[11:22:07.823] <TB1> INFO: 3489250 events read in total (333020ms).
[11:22:39.856] <TB1> INFO: 3829000 events read in total (365053ms).
[11:23:11.241] <TB1> INFO: 4160000 events read in total (396438ms).
[11:23:11.644] <TB1> INFO: Test took 397750ms.
[11:23:21.820] <TB1> INFO: dacScan step from 55 .. 74
[11:23:21.820] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[11:23:21.858] <TB1> INFO: run 1 of 1
[11:23:22.424] <TB1> INFO: Expecting 4160000 events.
[11:23:54.144] <TB1> INFO: 313200 events read in total (31319ms).
[11:24:26.078] <TB1> INFO: 627050 events read in total (63253ms).
[11:24:57.482] <TB1> INFO: 940800 events read in total (94657ms).
[11:25:29.739] <TB1> INFO: 1254450 events read in total (126914ms).
[11:26:01.025] <TB1> INFO: 1568300 events read in total (158200ms).
[11:26:32.580] <TB1> INFO: 1882250 events read in total (189755ms).
[11:27:04.083] <TB1> INFO: 2196150 events read in total (221258ms).
[11:27:35.537] <TB1> INFO: 2510100 events read in total (252712ms).
[11:28:07.559] <TB1> INFO: 2823850 events read in total (284734ms).
[11:28:39.356] <TB1> INFO: 3137500 events read in total (316531ms).
[11:29:12.971] <TB1> INFO: 3451200 events read in total (350146ms).
[11:29:44.939] <TB1> INFO: 3764900 events read in total (382114ms).
[11:30:17.167] <TB1> INFO: 4078350 events read in total (414342ms).
[11:30:25.458] <TB1> INFO: 4160000 events read in total (422633ms).
[11:30:25.756] <TB1> INFO: Test took 423840ms.
[11:30:33.858] <TB1> INFO: dacScan step from 75 .. 75
[11:30:33.858] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[11:30:33.858] <TB1> INFO: run 1 of 1
[11:30:34.374] <TB1> INFO: Expecting 208000 events.
[11:30:55.386] <TB1> INFO: 208000 events read in total (20611ms).
[11:30:55.395] <TB1> INFO: Test took 21537ms.
[11:30:55.785] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:57.021] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:58.027] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:30:59.024] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:31:00.063] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:31:01.105] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:31:02.165] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:31:03.213] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:31:04.278] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:31:05.343] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:31:06.406] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:31:07.481] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:31:08.525] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:31:09.554] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:31:10.569] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:31:11.587] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[11:31:12.602] <TB1> INFO: PixTest:: pg_setup set to default.
[11:31:12.604] <TB1> INFO: vcal mean: 39.72 39.55 39.20 41.83 42.02 43.44 43.03 43.65 43.78 44.39 43.85 42.76 41.85 38.94 39.40 39.80
[11:31:12.604] <TB1> INFO: vcal RMS: 1.18 1.22 1.03 1.45 1.27 1.44 1.48 1.51 1.49 1.56 1.79 1.52 1.31 1.23 1.18 1.12
[11:31:12.604] <TB1> INFO: number of X-ray hits detected: 237174 240738 235742 364041 383306 469352 443443 470529 440622 478228 451797 388170 355878 223860 226725 232700
[11:31:12.604] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:31:12.604] <TB1> INFO: X-ray hit rate [MHz/cm2]: 69.5 70.6 69.1 106.7 112.3 137.6 130.0 137.9 129.1 140.2 132.4 113.8 104.3 65.6 66.5 68.2
[11:31:12.604] <TB1> INFO: PixTestHighRate::doXNoiseMaps() done
[11:31:12.789] <TB1> INFO: enter test to run
[11:31:12.789] <TB1> INFO: test: no parameter change
[11:31:12.996] <TB1> QUIET: Connection to board 147 closed.
[11:31:13.330] <TB1> INFO: pXar: this is the end, my friend

[11:50:35.286] <TB1> INFO: *** Welcome to pxar ***
[11:50:35.286] <TB1> INFO: *** Today: 2016/02/09
[11:50:35.344] <TB1> INFO: *** Version: 9751
[11:50:35.344] <TB1> INFO: readRocDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[11:50:35.345] <TB1> INFO: readTbmDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[11:50:35.345] <TB1> INFO: readMaskFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[11:50:35.345] <TB1> INFO: readTrimFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[11:50:35.417] <TB1> INFO: clk: 4
[11:50:35.417] <TB1> INFO: ctr: 4
[11:50:35.417] <TB1> INFO: sda: 19
[11:50:35.417] <TB1> INFO: tin: 9
[11:50:35.417] <TB1> INFO: level: 15
[11:50:35.417] <TB1> INFO: triggerdelay: 0
[11:50:35.417] <TB1> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[11:50:35.417] <TB1> INFO: Log level: INFO
[11:50:35.430] <TB1> INFO: Found DTB DTB_WWXTQT
[11:50:35.445] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:50:35.447] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:50:35.448] <TB1> INFO: RPC call hashes of host and DTB match: 484264910
[11:50:36.999] <TB1> INFO: DUT info:
[11:50:36.999] <TB1> INFO: The DUT currently contains the following objects:
[11:50:36.999] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:50:36.999] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:50:36.999] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:50:36.999] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:50:36.999] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:36.999] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:36.999] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:36.999] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:36.999] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:36.999] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:36.999] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:36.999] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:36.999] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:36.999] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:36.999] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:36.999] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:36.999] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:37.000] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:37.000] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:37.000] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:50:37.400] <TB1> INFO: enter 'restricted' command line mode
[11:50:37.400] <TB1> INFO: enter test to run
[11:50:37.400] <TB1> INFO: test: HighRate no parameter change
[11:50:37.400] <TB1> INFO: running: highrate
[11:50:37.401] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[11:50:37.537] <TB1> INFO: ----------------------------------------------------------------------
[11:50:37.537] <TB1> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[11:50:37.537] <TB1> INFO: ----------------------------------------------------------------------
[11:50:37.631] <TB1> INFO: Expecting 768 events.
[11:50:38.623] <TB1> INFO: 768 events read in total (434ms).
[11:50:38.687] <TB1> INFO: Test took 1145ms.
[11:50:39.209] <TB1> INFO: Expecting 41600 events.
[11:50:42.978] <TB1> INFO: 41600 events read in total (3367ms).
[11:50:42.979] <TB1> INFO: Test took 4287ms.
[11:50:43.571] <TB1> INFO: Expecting 41600 events.
[11:50:47.370] <TB1> INFO: 41600 events read in total (3397ms).
[11:50:47.372] <TB1> INFO: Test took 4279ms.
[11:50:48.059] <TB1> INFO: Expecting 41600 events.
[11:50:51.960] <TB1> INFO: 41600 events read in total (3499ms).
[11:50:51.961] <TB1> INFO: Test took 4435ms.
[11:50:52.596] <TB1> INFO: Expecting 41600 events.
[11:50:56.482] <TB1> INFO: 41600 events read in total (3485ms).
[11:50:56.484] <TB1> INFO: Test took 4402ms.
[11:50:57.123] <TB1> INFO: Expecting 41600 events.
[11:51:01.038] <TB1> INFO: 41600 events read in total (3513ms).
[11:51:01.039] <TB1> INFO: Test took 4423ms.
[11:51:01.640] <TB1> INFO: Expecting 41600 events.
[11:51:05.572] <TB1> INFO: 41600 events read in total (3530ms).
[11:51:05.574] <TB1> INFO: Test took 4415ms.
[11:51:06.212] <TB1> INFO: Expecting 41600 events.
[11:51:10.124] <TB1> INFO: 41600 events read in total (3511ms).
[11:51:10.126] <TB1> INFO: Test took 4416ms.
[11:51:10.765] <TB1> INFO: Expecting 41600 events.
[11:51:14.787] <TB1> INFO: 41600 events read in total (3621ms).
[11:51:14.789] <TB1> INFO: Test took 4534ms.
[11:51:15.430] <TB1> INFO: Expecting 41600 events.
[11:51:19.343] <TB1> INFO: 41600 events read in total (3512ms).
[11:51:19.346] <TB1> INFO: Test took 4417ms.
[11:51:19.979] <TB1> INFO: Expecting 41600 events.
[11:51:23.890] <TB1> INFO: 41600 events read in total (3509ms).
[11:51:23.891] <TB1> INFO: Test took 4417ms.
[11:51:24.502] <TB1> INFO: Expecting 41600 events.
[11:51:28.438] <TB1> INFO: 41600 events read in total (3534ms).
[11:51:28.440] <TB1> INFO: Test took 4430ms.
[11:51:29.042] <TB1> INFO: Expecting 41600 events.
[11:51:33.000] <TB1> INFO: 41600 events read in total (3557ms).
[11:51:33.002] <TB1> INFO: Test took 4440ms.
[11:51:33.665] <TB1> INFO: Expecting 41600 events.
[11:51:37.576] <TB1> INFO: 41600 events read in total (3510ms).
[11:51:37.577] <TB1> INFO: Test took 4448ms.
[11:51:38.178] <TB1> INFO: Expecting 41600 events.
[11:51:42.101] <TB1> INFO: 41600 events read in total (3521ms).
[11:51:42.102] <TB1> INFO: Test took 4403ms.
[11:51:42.709] <TB1> INFO: Expecting 41600 events.
[11:51:46.642] <TB1> INFO: 41600 events read in total (3531ms).
[11:51:46.644] <TB1> INFO: Test took 4418ms.
[11:51:47.240] <TB1> INFO: Expecting 41600 events.
[11:51:51.235] <TB1> INFO: 41600 events read in total (3593ms).
[11:51:51.237] <TB1> INFO: Test took 4476ms.
[11:51:51.841] <TB1> INFO: Expecting 41600 events.
[11:51:55.778] <TB1> INFO: 41600 events read in total (3535ms).
[11:51:55.780] <TB1> INFO: Test took 4426ms.
[11:51:56.383] <TB1> INFO: Expecting 41600 events.
[11:52:00.221] <TB1> INFO: 41600 events read in total (3436ms).
[11:52:00.223] <TB1> INFO: Test took 4323ms.
[11:52:00.833] <TB1> INFO: Expecting 41600 events.
[11:52:04.812] <TB1> INFO: 41600 events read in total (3577ms).
[11:52:04.814] <TB1> INFO: Test took 4474ms.
[11:52:05.411] <TB1> INFO: Expecting 41600 events.
[11:52:09.115] <TB1> INFO: 41600 events read in total (3302ms).
[11:52:09.116] <TB1> INFO: Test took 4184ms.
[11:52:09.491] <TB1> INFO: enter test to run
[11:52:09.491] <TB1> INFO: test: Pretest no parameter change
[11:52:09.491] <TB1> INFO: running: pretest
[11:52:09.491] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[11:52:09.491] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[11:52:09.491] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[11:52:09.492] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[11:52:09.492] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[11:52:09.492] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[11:52:09.492] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[11:52:09.492] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[11:52:09.492] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[11:52:09.492] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[11:52:09.492] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[11:52:09.492] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[11:52:09.492] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[11:52:09.492] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[11:52:09.493] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[11:52:09.493] <TB1> INFO: write dac parameters into /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[11:52:09.493] <TB1> INFO: enter test to run
[11:52:09.493] <TB1> INFO: test: no parameter change
[11:52:09.667] <TB1> QUIET: Connection to board 147 closed.
[11:52:09.747] <TB1> INFO: pXar: this is the end, my friend

[11:52:41.203] <TB1> INFO: *** Welcome to pxar ***
[11:52:41.203] <TB1> INFO: *** Today: 2016/02/09
[11:52:41.267] <TB1> INFO: *** Version: 9751
[11:52:41.267] <TB1> INFO: readRocDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//dacParameters35_C15.dat
[11:52:41.267] <TB1> INFO: readTbmDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//tbmParameters_C0b.dat
[11:52:41.268] <TB1> INFO: readMaskFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//defaultMaskFile.dat
[11:52:41.268] <TB1> INFO: readTrimFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//trimParameters35_C15.dat
[11:52:41.339] <TB1> INFO: clk: 4
[11:52:41.339] <TB1> INFO: ctr: 4
[11:52:41.339] <TB1> INFO: sda: 19
[11:52:41.339] <TB1> INFO: tin: 9
[11:52:41.339] <TB1> INFO: level: 15
[11:52:41.339] <TB1> INFO: triggerdelay: 0
[11:52:41.339] <TB1> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[11:52:41.339] <TB1> INFO: Log level: INFO
[11:52:41.352] <TB1> INFO: Found DTB DTB_WWXTQT
[11:52:41.365] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:52:41.367] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:52:41.369] <TB1> INFO: RPC call hashes of host and DTB match: 484264910
[11:52:42.901] <TB1> INFO: DUT info:
[11:52:42.901] <TB1> INFO: The DUT currently contains the following objects:
[11:52:42.901] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:52:42.901] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:52:42.901] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:52:42.901] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:52:42.901] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:42.901] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:43.302] <TB1> INFO: enter 'restricted' command line mode
[11:52:43.302] <TB1> INFO: enter test to run
[11:52:43.302] <TB1> INFO: test: PixelAlive no parameter change
[11:52:43.302] <TB1> INFO: running: pixelalive
[11:52:43.307] <TB1> INFO: ######################################################################
[11:52:43.307] <TB1> INFO: PixTestAlive::doTest()
[11:52:43.307] <TB1> INFO: ######################################################################
[11:52:43.308] <TB1> INFO: ----------------------------------------------------------------------
[11:52:43.308] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:52:43.308] <TB1> INFO: ----------------------------------------------------------------------
[11:52:43.571] <TB1> INFO: Expecting 208000 events.
[11:52:54.516] <TB1> INFO: 208000 events read in total (10387ms).
[11:52:54.518] <TB1> INFO: Test took 11208ms.
[11:52:54.741] <TB1> INFO: PixTestAlive::aliveTest() done
[11:52:54.741] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0
[11:52:54.742] <TB1> INFO: ----------------------------------------------------------------------
[11:52:54.742] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:52:54.742] <TB1> INFO: ----------------------------------------------------------------------
[11:52:55.017] <TB1> INFO: Expecting 208000 events.
[11:53:02.442] <TB1> INFO: 208000 events read in total (6867ms).
[11:53:02.443] <TB1> INFO: Test took 7700ms.
[11:53:02.443] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:53:02.686] <TB1> INFO: PixTestAlive::maskTest() done
[11:53:02.686] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:53:02.687] <TB1> INFO: ----------------------------------------------------------------------
[11:53:02.687] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:53:02.687] <TB1> INFO: ----------------------------------------------------------------------
[11:53:02.948] <TB1> INFO: Expecting 208000 events.
[11:53:14.108] <TB1> INFO: 208000 events read in total (10604ms).
[11:53:14.109] <TB1> INFO: Test took 11420ms.
[11:53:14.301] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:53:14.301] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:53:14.302] <TB1> INFO: PixTestAlive::doTest() done, duration: 30 seconds
[11:53:14.337] <TB1> INFO: enter test to run
[11:53:14.337] <TB1> INFO: test: delay setting parameters: ->2<-
[11:53:14.337] <TB1> INFO: delay test by 2 seconds...
[11:53:16.337] <TB1> INFO: enter test to run
[11:53:16.337] <TB1> INFO: test: HighRate no parameter change
[11:53:16.337] <TB1> INFO: running: highrate
[11:53:16.337] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//011_HREfficiency_50//phCalibrationFitErr35_C15.dat
[11:53:16.481] <TB1> INFO: ----------------------------------------------------------------------
[11:53:16.481] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:53:16.481] <TB1> INFO: ----------------------------------------------------------------------
[11:53:16.968] <TB1> INFO: Expecting 208000 events.
[11:53:33.087] <TB1> INFO: 208000 events read in total (15718ms).
[11:53:33.093] <TB1> INFO: Test took 16609ms.
[11:53:33.731] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0
[11:53:33.731] <TB1> INFO: number of red-efficiency pixels: 150 137 154 264 318 458 386 394 345 402 413 301 232 159 133 144
[11:53:33.731] <TB1> INFO: number of X-ray hits detected: 120279 119803 116295 184392 191320 240403 224449 237987 223317 243630 232670 197725 179757 110426 111668 117950
[11:53:33.731] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:53:33.731] <TB1> INFO: number of Vcal hits detected: 207849 207859 207841 207718 207662 207503 207593 207578 207641 207578 207462 207680 207758 207832 207864 207853
[11:53:33.731] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.9 99.9 99.8 99.8 99.8 99.8 99.8 99.8 99.9 99.9 99.9 99.9 99.9
[11:53:33.731] <TB1> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.9 99.8 99.8 99.8 99.8 99.8 99.8 99.7 99.8 99.9 99.9 99.9 99.9
[11:53:33.731] <TB1> INFO: X-ray hit rate [MHz/cm2]: 35.3 35.1 34.1 54.0 56.1 70.5 65.8 69.8 65.5 71.4 68.2 58.0 52.7 32.4 32.7 34.6
[11:53:33.731] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:53:33.754] <TB1> INFO: PixTest:: pg_setup set to default.
[11:53:33.763] <TB1> INFO: enter test to run
[11:53:33.763] <TB1> INFO: test: no parameter change
[11:53:33.975] <TB1> QUIET: Connection to board 147 closed.
[11:53:34.055] <TB1> INFO: pXar: this is the end, my friend

[11:54:07.109] <TB1> INFO: *** Welcome to pxar ***
[11:54:07.109] <TB1> INFO: *** Today: 2016/02/09
[11:54:07.168] <TB1> INFO: *** Version: 9751
[11:54:07.168] <TB1> INFO: readRocDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//dacParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//dacParameters35_C15.dat
[11:54:07.169] <TB1> INFO: readTbmDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//tbmParameters_C0a.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//tbmParameters_C0b.dat
[11:54:07.169] <TB1> INFO: readMaskFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//defaultMaskFile.dat
[11:54:07.169] <TB1> INFO: readTrimFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//trimParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//trimParameters35_C15.dat
[11:54:07.263] <TB1> INFO: clk: 4
[11:54:07.263] <TB1> INFO: ctr: 4
[11:54:07.263] <TB1> INFO: sda: 19
[11:54:07.263] <TB1> INFO: tin: 9
[11:54:07.263] <TB1> INFO: level: 15
[11:54:07.263] <TB1> INFO: triggerdelay: 0
[11:54:07.263] <TB1> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[11:54:07.263] <TB1> INFO: Log level: INFO
[11:54:07.276] <TB1> INFO: Found DTB DTB_WWXTQT
[11:54:07.289] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:54:07.291] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:54:07.293] <TB1> INFO: RPC call hashes of host and DTB match: 484264910
[11:54:08.846] <TB1> INFO: DUT info:
[11:54:08.846] <TB1> INFO: The DUT currently contains the following objects:
[11:54:08.846] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:54:08.846] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:54:08.846] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:54:08.846] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:54:08.846] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:08.846] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:09.246] <TB1> INFO: enter 'restricted' command line mode
[11:54:09.246] <TB1> INFO: enter test to run
[11:54:09.247] <TB1> INFO: test: PixelAlive no parameter change
[11:54:09.247] <TB1> INFO: running: pixelalive
[11:54:09.250] <TB1> INFO: ######################################################################
[11:54:09.250] <TB1> INFO: PixTestAlive::doTest()
[11:54:09.250] <TB1> INFO: ######################################################################
[11:54:09.251] <TB1> INFO: ----------------------------------------------------------------------
[11:54:09.251] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:54:09.251] <TB1> INFO: ----------------------------------------------------------------------
[11:54:09.511] <TB1> INFO: Expecting 208000 events.
[11:54:20.849] <TB1> INFO: 208000 events read in total (10780ms).
[11:54:20.851] <TB1> INFO: Test took 11598ms.
[11:54:21.081] <TB1> INFO: PixTestAlive::aliveTest() done
[11:54:21.082] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0
[11:54:21.083] <TB1> INFO: ----------------------------------------------------------------------
[11:54:21.083] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:54:21.083] <TB1> INFO: ----------------------------------------------------------------------
[11:54:21.374] <TB1> INFO: Expecting 208000 events.
[11:54:28.932] <TB1> INFO: 208000 events read in total (7002ms).
[11:54:28.932] <TB1> INFO: Test took 7847ms.
[11:54:28.933] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:54:29.170] <TB1> INFO: PixTestAlive::maskTest() done
[11:54:29.170] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:54:29.171] <TB1> INFO: ----------------------------------------------------------------------
[11:54:29.171] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:54:29.171] <TB1> INFO: ----------------------------------------------------------------------
[11:54:29.511] <TB1> INFO: Expecting 208000 events.
[11:54:40.531] <TB1> INFO: 208000 events read in total (10464ms).
[11:54:40.532] <TB1> INFO: Test took 11360ms.
[11:54:40.730] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:54:40.730] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:54:40.730] <TB1> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[11:54:40.762] <TB1> INFO: enter test to run
[11:54:40.762] <TB1> INFO: test: delay setting parameters: ->2<-
[11:54:40.762] <TB1> INFO: delay test by 2 seconds...
[11:54:42.762] <TB1> INFO: enter test to run
[11:54:42.762] <TB1> INFO: test: HighRate no parameter change
[11:54:42.762] <TB1> INFO: running: highrate
[11:54:42.762] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//012_HREfficiency_75//phCalibrationFitErr35_C15.dat
[11:54:42.928] <TB1> INFO: ----------------------------------------------------------------------
[11:54:42.928] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:54:42.928] <TB1> INFO: ----------------------------------------------------------------------
[11:54:43.440] <TB1> INFO: Expecting 208000 events.
[11:55:01.721] <TB1> INFO: 208000 events read in total (17879ms).
[11:55:01.728] <TB1> INFO: Test took 18797ms.
[11:55:02.499] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0
[11:55:02.499] <TB1> INFO: number of red-efficiency pixels: 242 251 319 558 653 949 769 947 770 922 864 626 439 302 236 233
[11:55:02.499] <TB1> INFO: number of X-ray hits detected: 174596 174194 171243 268033 280515 347214 325799 346540 325220 353239 334490 285896 262202 161309 165132 170852
[11:55:02.499] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:55:02.499] <TB1> INFO: number of Vcal hits detected: 207751 207743 207646 207399 207243 206884 207096 206916 207118 206925 206905 207305 207527 207663 207756 207759
[11:55:02.499] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.7 99.7 99.5 99.6 99.5 99.6 99.5 99.6 99.7 99.8 99.9 99.9 99.9
[11:55:02.499] <TB1> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.8 99.7 99.6 99.5 99.6 99.5 99.6 99.5 99.5 99.7 99.8 99.8 99.9 99.9
[11:55:02.499] <TB1> INFO: X-ray hit rate [MHz/cm2]: 51.2 51.1 50.2 78.6 82.2 101.8 95.5 101.6 95.3 103.5 98.0 83.8 76.9 47.3 48.4 50.1
[11:55:02.499] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:55:02.527] <TB1> INFO: PixTest:: pg_setup set to default.
[11:55:02.540] <TB1> INFO: enter test to run
[11:55:02.540] <TB1> INFO: test: no parameter change
[11:55:02.826] <TB1> QUIET: Connection to board 147 closed.
[11:55:02.906] <TB1> INFO: pXar: this is the end, my friend

[11:55:38.410] <TB1> INFO: *** Welcome to pxar ***
[11:55:38.410] <TB1> INFO: *** Today: 2016/02/09
[11:55:38.467] <TB1> INFO: *** Version: 9751
[11:55:38.467] <TB1> INFO: readRocDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//dacParameters35_C15.dat
[11:55:38.468] <TB1> INFO: readTbmDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//tbmParameters_C0b.dat
[11:55:38.468] <TB1> INFO: readMaskFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//defaultMaskFile.dat
[11:55:38.468] <TB1> INFO: readTrimFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//trimParameters35_C15.dat
[11:55:38.536] <TB1> INFO: clk: 4
[11:55:38.536] <TB1> INFO: ctr: 4
[11:55:38.536] <TB1> INFO: sda: 19
[11:55:38.536] <TB1> INFO: tin: 9
[11:55:38.536] <TB1> INFO: level: 15
[11:55:38.536] <TB1> INFO: triggerdelay: 0
[11:55:38.536] <TB1> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[11:55:38.536] <TB1> INFO: Log level: INFO
[11:55:38.548] <TB1> INFO: Found DTB DTB_WWXTQT
[11:55:38.561] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:55:38.563] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:55:38.565] <TB1> INFO: RPC call hashes of host and DTB match: 484264910
[11:55:40.119] <TB1> INFO: DUT info:
[11:55:40.119] <TB1> INFO: The DUT currently contains the following objects:
[11:55:40.119] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:55:40.119] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:55:40.119] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:55:40.119] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:55:40.119] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.119] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:40.520] <TB1> INFO: enter 'restricted' command line mode
[11:55:40.520] <TB1> INFO: enter test to run
[11:55:40.520] <TB1> INFO: test: PixelAlive no parameter change
[11:55:40.520] <TB1> INFO: running: pixelalive
[11:55:40.524] <TB1> INFO: ######################################################################
[11:55:40.524] <TB1> INFO: PixTestAlive::doTest()
[11:55:40.524] <TB1> INFO: ######################################################################
[11:55:40.525] <TB1> INFO: ----------------------------------------------------------------------
[11:55:40.525] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:55:40.525] <TB1> INFO: ----------------------------------------------------------------------
[11:55:40.788] <TB1> INFO: Expecting 208000 events.
[11:55:52.110] <TB1> INFO: 208000 events read in total (10764ms).
[11:55:52.112] <TB1> INFO: Test took 11585ms.
[11:55:52.337] <TB1> INFO: PixTestAlive::aliveTest() done
[11:55:52.337] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0
[11:55:52.338] <TB1> INFO: ----------------------------------------------------------------------
[11:55:52.338] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:55:52.338] <TB1> INFO: ----------------------------------------------------------------------
[11:55:52.611] <TB1> INFO: Expecting 208000 events.
[11:56:00.111] <TB1> INFO: 208000 events read in total (6943ms).
[11:56:00.111] <TB1> INFO: Test took 7771ms.
[11:56:00.111] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:56:00.351] <TB1> INFO: PixTestAlive::maskTest() done
[11:56:00.351] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:56:00.352] <TB1> INFO: ----------------------------------------------------------------------
[11:56:00.352] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:56:00.352] <TB1> INFO: ----------------------------------------------------------------------
[11:56:00.639] <TB1> INFO: Expecting 208000 events.
[11:56:11.669] <TB1> INFO: 208000 events read in total (10474ms).
[11:56:11.670] <TB1> INFO: Test took 11317ms.
[11:56:11.871] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:56:11.871] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:56:11.871] <TB1> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[11:56:11.902] <TB1> INFO: enter test to run
[11:56:11.902] <TB1> INFO: test: delay setting parameters: ->2<-
[11:56:11.902] <TB1> INFO: delay test by 2 seconds...
[11:56:13.902] <TB1> INFO: enter test to run
[11:56:13.902] <TB1> INFO: test: HighRate no parameter change
[11:56:13.902] <TB1> INFO: running: highrate
[11:56:13.902] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//013_HREfficiency_100//phCalibrationFitErr35_C15.dat
[11:56:14.043] <TB1> INFO: ----------------------------------------------------------------------
[11:56:14.043] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:56:14.043] <TB1> INFO: ----------------------------------------------------------------------
[11:56:14.527] <TB1> INFO: Expecting 208000 events.
[11:56:35.766] <TB1> INFO: 208000 events read in total (20837ms).
[11:56:35.778] <TB1> INFO: Test took 21732ms.
[11:56:36.871] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0
[11:56:36.871] <TB1> INFO: number of red-efficiency pixels: 405 434 534 990 1275 1703 1439 1760 1476 1688 1602 1170 857 487 406 439
[11:56:36.871] <TB1> INFO: number of X-ray hits detected: 238811 240269 235575 366305 383256 471195 442097 470661 441447 478803 454166 388763 356585 222962 225493 233453
[11:56:36.871] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:56:36.871] <TB1> INFO: number of Vcal hits detected: 207563 207543 207302 206784 206310 205477 205943 205613 206121 205482 205623 206515 206973 207405 207568 207534
[11:56:36.871] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.8 99.8 99.7 99.5 99.3 98.9 99.1 98.9 99.2 98.9 99.0 99.4 99.6 99.8 99.8 99.8
[11:56:36.871] <TB1> INFO: Vcal hit overall efficiency (%): 99.8 99.8 99.7 99.4 99.2 98.8 99.0 98.9 99.1 98.8 98.9 99.3 99.5 99.7 99.8 99.8
[11:56:36.871] <TB1> INFO: X-ray hit rate [MHz/cm2]: 70.0 70.4 69.0 107.4 112.3 138.1 129.6 138.0 129.4 140.3 133.1 113.9 104.5 65.4 66.1 68.4
[11:56:36.871] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:56:36.904] <TB1> INFO: PixTest:: pg_setup set to default.
[11:56:36.917] <TB1> INFO: enter test to run
[11:56:36.917] <TB1> INFO: test: no parameter change
[11:56:37.122] <TB1> QUIET: Connection to board 147 closed.
[11:56:37.202] <TB1> INFO: pXar: this is the end, my friend

[11:57:11.313] <TB1> INFO: *** Welcome to pxar ***
[11:57:11.313] <TB1> INFO: *** Today: 2016/02/09
[11:57:11.371] <TB1> INFO: *** Version: 9751
[11:57:11.371] <TB1> INFO: readRocDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//dacParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//dacParameters35_C15.dat
[11:57:11.372] <TB1> INFO: readTbmDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//tbmParameters_C0a.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//tbmParameters_C0b.dat
[11:57:11.372] <TB1> INFO: readMaskFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//defaultMaskFile.dat
[11:57:11.372] <TB1> INFO: readTrimFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//trimParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//trimParameters35_C15.dat
[11:57:11.442] <TB1> INFO: clk: 4
[11:57:11.442] <TB1> INFO: ctr: 4
[11:57:11.442] <TB1> INFO: sda: 19
[11:57:11.442] <TB1> INFO: tin: 9
[11:57:11.442] <TB1> INFO: level: 15
[11:57:11.442] <TB1> INFO: triggerdelay: 0
[11:57:11.442] <TB1> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[11:57:11.442] <TB1> INFO: Log level: INFO
[11:57:11.454] <TB1> INFO: Found DTB DTB_WWXTQT
[11:57:11.467] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:57:11.469] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:57:11.471] <TB1> INFO: RPC call hashes of host and DTB match: 484264910
[11:57:13.009] <TB1> INFO: DUT info:
[11:57:13.009] <TB1> INFO: The DUT currently contains the following objects:
[11:57:13.009] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:57:13.009] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:57:13.009] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:57:13.009] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:57:13.009] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.009] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.009] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.009] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.009] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.010] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.010] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.010] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.010] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.010] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.010] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.010] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.010] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.010] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.010] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.010] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:13.410] <TB1> INFO: enter 'restricted' command line mode
[11:57:13.410] <TB1> INFO: enter test to run
[11:57:13.411] <TB1> INFO: test: PixelAlive no parameter change
[11:57:13.411] <TB1> INFO: running: pixelalive
[11:57:13.414] <TB1> INFO: ######################################################################
[11:57:13.414] <TB1> INFO: PixTestAlive::doTest()
[11:57:13.414] <TB1> INFO: ######################################################################
[11:57:13.415] <TB1> INFO: ----------------------------------------------------------------------
[11:57:13.415] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:57:13.415] <TB1> INFO: ----------------------------------------------------------------------
[11:57:13.696] <TB1> INFO: Expecting 208000 events.
[11:57:25.016] <TB1> INFO: 208000 events read in total (10762ms).
[11:57:25.018] <TB1> INFO: Test took 11601ms.
[11:57:25.264] <TB1> INFO: PixTestAlive::aliveTest() done
[11:57:25.264] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0
[11:57:25.266] <TB1> INFO: ----------------------------------------------------------------------
[11:57:25.266] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:57:25.266] <TB1> INFO: ----------------------------------------------------------------------
[11:57:25.532] <TB1> INFO: Expecting 208000 events.
[11:57:32.972] <TB1> INFO: 208000 events read in total (6883ms).
[11:57:32.973] <TB1> INFO: Test took 7705ms.
[11:57:32.974] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:57:33.214] <TB1> INFO: PixTestAlive::maskTest() done
[11:57:33.214] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:57:33.216] <TB1> INFO: ----------------------------------------------------------------------
[11:57:33.216] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:57:33.216] <TB1> INFO: ----------------------------------------------------------------------
[11:57:33.502] <TB1> INFO: Expecting 208000 events.
[11:57:44.558] <TB1> INFO: 208000 events read in total (10499ms).
[11:57:44.559] <TB1> INFO: Test took 11342ms.
[11:57:44.756] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:57:44.756] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:57:44.757] <TB1> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[11:57:44.788] <TB1> INFO: enter test to run
[11:57:44.788] <TB1> INFO: test: delay setting parameters: ->2<-
[11:57:44.788] <TB1> INFO: delay test by 2 seconds...
[11:57:46.788] <TB1> INFO: enter test to run
[11:57:46.788] <TB1> INFO: test: HighRate no parameter change
[11:57:46.788] <TB1> INFO: running: highrate
[11:57:46.788] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//014_HREfficiency_125//phCalibrationFitErr35_C15.dat
[11:57:46.956] <TB1> INFO: ----------------------------------------------------------------------
[11:57:46.956] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:57:46.956] <TB1> INFO: ----------------------------------------------------------------------
[11:57:47.458] <TB1> INFO: Expecting 208000 events.
[11:58:11.651] <TB1> INFO: 208000 events read in total (23791ms).
[11:58:11.664] <TB1> INFO: Test took 24705ms.
[11:58:12.833] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0
[11:58:12.833] <TB1> INFO: number of red-efficiency pixels: 572 602 743 1536 1705 2443 2168 2509 2074 2432 2287 1673 1324 713 550 663
[11:58:12.833] <TB1> INFO: number of X-ray hits detected: 289126 293032 287080 442833 465249 568189 536212 569794 533333 575791 545895 469664 430180 272012 274620 281257
[11:58:12.833] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:58:12.833] <TB1> INFO: number of Vcal hits detected: 207374 207344 206900 205878 205404 203511 204263 203836 204810 203664 204091 205452 206278 206984 207392 207257
[11:58:12.833] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.7 99.7 99.6 99.1 98.9 98.1 98.4 98.2 98.6 98.2 98.4 99.0 99.3 99.6 99.7 99.7
[11:58:12.833] <TB1> INFO: Vcal hit overall efficiency (%): 99.7 99.7 99.5 99.0 98.8 97.8 98.2 98.0 98.5 97.9 98.1 98.8 99.2 99.5 99.7 99.6
[11:58:12.833] <TB1> INFO: X-ray hit rate [MHz/cm2]: 84.7 85.9 84.1 129.8 136.4 166.5 157.2 167.0 156.3 168.8 160.0 137.7 126.1 79.7 80.5 82.4
[11:58:12.833] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:58:12.858] <TB1> INFO: PixTest:: pg_setup set to default.
[11:58:12.869] <TB1> INFO: enter test to run
[11:58:12.869] <TB1> INFO: test: no parameter change
[11:58:13.097] <TB1> QUIET: Connection to board 147 closed.
[11:58:13.176] <TB1> INFO: pXar: this is the end, my friend

[11:58:44.987] <TB1> INFO: *** Welcome to pxar ***
[11:58:44.987] <TB1> INFO: *** Today: 2016/02/09
[11:58:45.054] <TB1> INFO: *** Version: 9751
[11:58:45.054] <TB1> INFO: readRocDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//dacParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//dacParameters35_C15.dat
[11:58:45.055] <TB1> INFO: readTbmDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//tbmParameters_C0a.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//tbmParameters_C0b.dat
[11:58:45.055] <TB1> INFO: readMaskFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//defaultMaskFile.dat
[11:58:45.055] <TB1> INFO: readTrimFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//trimParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//trimParameters35_C15.dat
[11:58:45.125] <TB1> INFO: clk: 4
[11:58:45.125] <TB1> INFO: ctr: 4
[11:58:45.125] <TB1> INFO: sda: 19
[11:58:45.125] <TB1> INFO: tin: 9
[11:58:45.125] <TB1> INFO: level: 15
[11:58:45.125] <TB1> INFO: triggerdelay: 0
[11:58:45.125] <TB1> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[11:58:45.125] <TB1> INFO: Log level: INFO
[11:58:45.138] <TB1> INFO: Found DTB DTB_WWXTQT
[11:58:45.153] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[11:58:45.155] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[11:58:45.157] <TB1> INFO: RPC call hashes of host and DTB match: 484264910
[11:58:46.694] <TB1> INFO: DUT info:
[11:58:46.694] <TB1> INFO: The DUT currently contains the following objects:
[11:58:46.694] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[11:58:46.694] <TB1> INFO: TBM Core alpha (0): 7 registers set
[11:58:46.694] <TB1> INFO: TBM Core beta (1): 7 registers set
[11:58:46.694] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:58:46.694] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:46.694] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:47.095] <TB1> INFO: enter 'restricted' command line mode
[11:58:47.095] <TB1> INFO: enter test to run
[11:58:47.095] <TB1> INFO: test: PixelAlive no parameter change
[11:58:47.095] <TB1> INFO: running: pixelalive
[11:58:47.099] <TB1> INFO: ######################################################################
[11:58:47.099] <TB1> INFO: PixTestAlive::doTest()
[11:58:47.099] <TB1> INFO: ######################################################################
[11:58:47.100] <TB1> INFO: ----------------------------------------------------------------------
[11:58:47.100] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:58:47.100] <TB1> INFO: ----------------------------------------------------------------------
[11:58:47.363] <TB1> INFO: Expecting 208000 events.
[11:58:59.058] <TB1> INFO: 208000 events read in total (11137ms).
[11:58:59.060] <TB1> INFO: Test took 11958ms.
[11:58:59.290] <TB1> INFO: PixTestAlive::aliveTest() done
[11:58:59.290] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0
[11:58:59.292] <TB1> INFO: ----------------------------------------------------------------------
[11:58:59.292] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:58:59.292] <TB1> INFO: ----------------------------------------------------------------------
[11:58:59.597] <TB1> INFO: Expecting 208000 events.
[11:59:07.159] <TB1> INFO: 208000 events read in total (7006ms).
[11:59:07.159] <TB1> INFO: Test took 7865ms.
[11:59:07.160] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:59:07.399] <TB1> INFO: PixTestAlive::maskTest() done
[11:59:07.399] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:59:07.400] <TB1> INFO: ----------------------------------------------------------------------
[11:59:07.400] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:59:07.400] <TB1> INFO: ----------------------------------------------------------------------
[11:59:07.688] <TB1> INFO: Expecting 208000 events.
[11:59:18.983] <TB1> INFO: 208000 events read in total (10738ms).
[11:59:18.984] <TB1> INFO: Test took 11582ms.
[11:59:19.188] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[11:59:19.188] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:59:19.188] <TB1> INFO: PixTestAlive::doTest() done, duration: 32 seconds
[11:59:19.227] <TB1> INFO: enter test to run
[11:59:19.227] <TB1> INFO: test: delay setting parameters: ->2<-
[11:59:19.227] <TB1> INFO: delay test by 2 seconds...
[11:59:21.227] <TB1> INFO: enter test to run
[11:59:21.227] <TB1> INFO: test: HighRate no parameter change
[11:59:21.227] <TB1> INFO: running: highrate
[11:59:21.228] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//015_HREfficiency_150//phCalibrationFitErr35_C15.dat
[11:59:21.402] <TB1> INFO: ----------------------------------------------------------------------
[11:59:21.402] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:59:21.402] <TB1> INFO: ----------------------------------------------------------------------
[11:59:21.887] <TB1> INFO: Expecting 208000 events.
[11:59:48.583] <TB1> INFO: 208000 events read in total (26295ms).
[11:59:48.598] <TB1> INFO: Test took 27193ms.
[11:59:49.949] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0
[11:59:49.949] <TB1> INFO: number of red-efficiency pixels: 873 874 1012 2110 2278 3141 2839 3211 2812 3122 2981 2320 1757 937 826 876
[11:59:49.949] <TB1> INFO: number of X-ray hits detected: 343272 350011 342687 524449 549716 672047 635737 675565 629263 686150 643066 557444 508713 323483 327030 334006
[11:59:49.949] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:59:49.949] <TB1> INFO: number of Vcal hits detected: 206986 207001 206215 204550 203835 200634 201885 201149 202670 200595 201556 203920 205353 206414 207045 206969
[11:59:49.949] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.6 99.6 99.3 98.5 98.3 96.9 97.4 97.0 97.7 96.8 97.3 98.3 98.9 99.4 99.6 99.6
[11:59:49.949] <TB1> INFO: Vcal hit overall efficiency (%): 99.5 99.5 99.1 98.3 98.0 96.5 97.1 96.7 97.4 96.4 96.9 98.0 98.7 99.2 99.5 99.5
[11:59:49.949] <TB1> INFO: X-ray hit rate [MHz/cm2]: 100.6 102.6 100.4 153.7 161.1 197.0 186.3 198.0 184.4 201.1 188.5 163.4 149.1 94.8 95.9 97.9
[11:59:49.949] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[11:59:49.979] <TB1> INFO: PixTest:: pg_setup set to default.
[11:59:49.990] <TB1> INFO: enter test to run
[11:59:49.991] <TB1> INFO: test: no parameter change
[11:59:50.215] <TB1> QUIET: Connection to board 147 closed.
[11:59:50.294] <TB1> INFO: pXar: this is the end, my friend

[12:00:19.438] <TB1> INFO: *** Welcome to pxar ***
[12:00:19.438] <TB1> INFO: *** Today: 2016/02/09
[12:00:19.499] <TB1> INFO: *** Version: 9751
[12:00:19.499] <TB1> INFO: readRocDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//dacParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//dacParameters35_C15.dat
[12:00:19.500] <TB1> INFO: readTbmDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//tbmParameters_C0a.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//tbmParameters_C0b.dat
[12:00:19.500] <TB1> INFO: readMaskFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//defaultMaskFile.dat
[12:00:19.500] <TB1> INFO: readTrimFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//trimParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//trimParameters35_C15.dat
[12:00:19.584] <TB1> INFO: clk: 4
[12:00:19.584] <TB1> INFO: ctr: 4
[12:00:19.584] <TB1> INFO: sda: 19
[12:00:19.584] <TB1> INFO: tin: 9
[12:00:19.584] <TB1> INFO: level: 15
[12:00:19.584] <TB1> INFO: triggerdelay: 0
[12:00:19.584] <TB1> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[12:00:19.584] <TB1> INFO: Log level: INFO
[12:00:19.596] <TB1> INFO: Found DTB DTB_WWXTQT
[12:00:19.609] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[12:00:19.610] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[12:00:19.612] <TB1> INFO: RPC call hashes of host and DTB match: 484264910
[12:00:21.180] <TB1> INFO: DUT info:
[12:00:21.180] <TB1> INFO: The DUT currently contains the following objects:
[12:00:21.180] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[12:00:21.180] <TB1> INFO: TBM Core alpha (0): 7 registers set
[12:00:21.180] <TB1> INFO: TBM Core beta (1): 7 registers set
[12:00:21.180] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:00:21.180] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.180] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:21.581] <TB1> INFO: enter 'restricted' command line mode
[12:00:21.581] <TB1> INFO: enter test to run
[12:00:21.581] <TB1> INFO: test: PixelAlive no parameter change
[12:00:21.581] <TB1> INFO: running: pixelalive
[12:00:21.584] <TB1> INFO: ######################################################################
[12:00:21.584] <TB1> INFO: PixTestAlive::doTest()
[12:00:21.584] <TB1> INFO: ######################################################################
[12:00:21.585] <TB1> INFO: ----------------------------------------------------------------------
[12:00:21.585] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:00:21.585] <TB1> INFO: ----------------------------------------------------------------------
[12:00:21.853] <TB1> INFO: Expecting 208000 events.
[12:00:33.247] <TB1> INFO: 208000 events read in total (10836ms).
[12:00:33.248] <TB1> INFO: Test took 11661ms.
[12:00:33.468] <TB1> INFO: PixTestAlive::aliveTest() done
[12:00:33.468] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0
[12:00:33.469] <TB1> INFO: ----------------------------------------------------------------------
[12:00:33.469] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:00:33.469] <TB1> INFO: ----------------------------------------------------------------------
[12:00:33.732] <TB1> INFO: Expecting 208000 events.
[12:00:41.321] <TB1> INFO: 208000 events read in total (7033ms).
[12:00:41.322] <TB1> INFO: Test took 7851ms.
[12:00:41.323] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[12:00:41.566] <TB1> INFO: PixTestAlive::maskTest() done
[12:00:41.566] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:00:41.567] <TB1> INFO: ----------------------------------------------------------------------
[12:00:41.567] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:00:41.567] <TB1> INFO: ----------------------------------------------------------------------
[12:00:41.951] <TB1> INFO: Expecting 208000 events.
[12:00:53.303] <TB1> INFO: 208000 events read in total (10796ms).
[12:00:53.304] <TB1> INFO: Test took 11736ms.
[12:00:53.505] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[12:00:53.505] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:00:53.505] <TB1> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[12:00:53.553] <TB1> INFO: enter test to run
[12:00:53.553] <TB1> INFO: test: delay setting parameters: ->2<-
[12:00:53.553] <TB1> INFO: delay test by 2 seconds...
[12:00:55.553] <TB1> INFO: enter test to run
[12:00:55.553] <TB1> INFO: test: HighRate no parameter change
[12:00:55.553] <TB1> INFO: running: highrate
[12:00:55.553] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//016_HREfficiency_200//phCalibrationFitErr35_C15.dat
[12:00:55.729] <TB1> INFO: ----------------------------------------------------------------------
[12:00:55.729] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[12:00:55.729] <TB1> INFO: ----------------------------------------------------------------------
[12:00:56.244] <TB1> INFO: Expecting 208000 events.
[12:01:30.606] <TB1> INFO: 208000 events read in total (33961ms).
[12:01:30.627] <TB1> INFO: Test took 34895ms.
[12:01:32.407] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0
[12:01:32.407] <TB1> INFO: number of red-efficiency pixels: 1600 1729 1615 3273 3466 3978 3852 4048 3887 3971 3944 3389 3034 1539 1563 1575
[12:01:32.407] <TB1> INFO: number of X-ray hits detected: 460515 473625 466314 702259 738410 898012 854821 908298 841556 911978 856898 741730 682372 437127 441302 447131
[12:01:32.407] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[12:01:32.407] <TB1> INFO: number of Vcal hits detected: 205820 205609 203637 199678 197869 190801 192996 190696 194586 190313 192650 198442 201270 204205 205926 205842
[12:01:32.407] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.0 98.9 98.3 96.4 95.7 92.6 93.6 92.2 94.0 92.3 93.4 96.0 97.1 98.5 99.1 99.1
[12:01:32.407] <TB1> INFO: Vcal hit overall efficiency (%): 99.0 98.9 97.9 96.0 95.1 91.7 92.8 91.7 93.6 91.5 92.6 95.4 96.8 98.2 99.0 99.0
[12:01:32.407] <TB1> INFO: X-ray hit rate [MHz/cm2]: 135.0 138.8 136.7 205.8 216.4 263.2 250.6 266.2 246.7 267.3 251.2 217.4 200.0 128.1 129.3 131.1
[12:01:32.407] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[12:01:32.437] <TB1> INFO: PixTest:: pg_setup set to default.
[12:01:32.449] <TB1> INFO: enter test to run
[12:01:32.449] <TB1> INFO: test: no parameter change
[12:01:32.665] <TB1> QUIET: Connection to board 147 closed.
[12:01:32.745] <TB1> INFO: pXar: this is the end, my friend

[12:02:02.346] <TB1> INFO: *** Welcome to pxar ***
[12:02:02.346] <TB1> INFO: *** Today: 2016/02/09
[12:02:02.411] <TB1> INFO: *** Version: 9751
[12:02:02.411] <TB1> INFO: readRocDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//dacParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//dacParameters35_C15.dat
[12:02:02.412] <TB1> INFO: readTbmDacs: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//tbmParameters_C0a.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//tbmParameters_C0b.dat
[12:02:02.412] <TB1> INFO: readMaskFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//defaultMaskFile.dat
[12:02:02.412] <TB1> INFO: readTrimFile: /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//trimParameters35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//trimParameters35_C15.dat
[12:02:02.490] <TB1> INFO: clk: 4
[12:02:02.490] <TB1> INFO: ctr: 4
[12:02:02.490] <TB1> INFO: sda: 19
[12:02:02.490] <TB1> INFO: tin: 9
[12:02:02.490] <TB1> INFO: level: 15
[12:02:02.490] <TB1> INFO: triggerdelay: 0
[12:02:02.490] <TB1> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[12:02:02.490] <TB1> INFO: Log level: INFO
[12:02:02.503] <TB1> INFO: Found DTB DTB_WWXTQT
[12:02:02.518] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[12:02:02.520] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[12:02:02.522] <TB1> INFO: RPC call hashes of host and DTB match: 484264910
[12:02:04.081] <TB1> INFO: DUT info:
[12:02:04.081] <TB1> INFO: The DUT currently contains the following objects:
[12:02:04.081] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[12:02:04.081] <TB1> INFO: TBM Core alpha (0): 7 registers set
[12:02:04.081] <TB1> INFO: TBM Core beta (1): 7 registers set
[12:02:04.081] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:02:04.081] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.081] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.082] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.082] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.082] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.082] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.082] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.082] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.082] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.082] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.082] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.082] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.082] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.082] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.082] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.082] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:02:04.483] <TB1> INFO: enter 'restricted' command line mode
[12:02:04.483] <TB1> INFO: enter test to run
[12:02:04.483] <TB1> INFO: test: PixelAlive no parameter change
[12:02:04.483] <TB1> INFO: running: pixelalive
[12:02:04.487] <TB1> INFO: ######################################################################
[12:02:04.487] <TB1> INFO: PixTestAlive::doTest()
[12:02:04.487] <TB1> INFO: ######################################################################
[12:02:04.488] <TB1> INFO: ----------------------------------------------------------------------
[12:02:04.488] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:02:04.488] <TB1> INFO: ----------------------------------------------------------------------
[12:02:04.773] <TB1> INFO: Expecting 208000 events.
[12:02:16.418] <TB1> INFO: 208000 events read in total (11087ms).
[12:02:16.420] <TB1> INFO: Test took 11930ms.
[12:02:16.647] <TB1> INFO: PixTestAlive::aliveTest() done
[12:02:16.647] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0
[12:02:16.648] <TB1> INFO: ----------------------------------------------------------------------
[12:02:16.648] <TB1> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:02:16.648] <TB1> INFO: ----------------------------------------------------------------------
[12:02:16.913] <TB1> INFO: Expecting 208000 events.
[12:02:24.314] <TB1> INFO: 208000 events read in total (6845ms).
[12:02:24.315] <TB1> INFO: Test took 7665ms.
[12:02:24.315] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[12:02:24.557] <TB1> INFO: PixTestAlive::maskTest() done
[12:02:24.557] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:02:24.559] <TB1> INFO: ----------------------------------------------------------------------
[12:02:24.559] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:02:24.559] <TB1> INFO: ----------------------------------------------------------------------
[12:02:24.827] <TB1> INFO: Expecting 208000 events.
[12:02:36.049] <TB1> INFO: 208000 events read in total (10666ms).
[12:02:36.050] <TB1> INFO: Test took 11490ms.
[12:02:36.252] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[12:02:36.252] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:02:36.252] <TB1> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[12:02:36.296] <TB1> INFO: enter test to run
[12:02:36.296] <TB1> INFO: test: delay setting parameters: ->2<-
[12:02:36.296] <TB1> INFO: delay test by 2 seconds...
[12:02:38.296] <TB1> INFO: enter test to run
[12:02:38.296] <TB1> INFO: test: HighRate no parameter change
[12:02:38.296] <TB1> INFO: running: highrate
[12:02:38.296] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2152_XrayQualification_2016-02-09_11h35m_1455014124//017_HREfficiency_250//phCalibrationFitErr35_C15.dat
[12:02:38.430] <TB1> INFO: ----------------------------------------------------------------------
[12:02:38.430] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[12:02:38.430] <TB1> INFO: ----------------------------------------------------------------------
[12:02:38.946] <TB1> INFO: Expecting 208000 events.
[12:03:15.949] <TB1> INFO: 184150 events read in total (36601ms).
[12:03:20.820] <TB1> INFO: 208000 events read in total (41472ms).
[12:03:20.839] <TB1> INFO: Test took 42405ms.
[12:03:22.903] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0
[12:03:22.903] <TB1> INFO: number of red-efficiency pixels: 2440 2562 2107 3921 4016 4148 4123 4150 4135 4147 4143 3973 3831 1992 2376 2325
[12:03:22.903] <TB1> INFO: number of X-ray hits detected: 568418 587036 579232 862202 905992 1103288 1055030 1120315 1031675 1118981 1047644 906910 835562 538986 544173 549931
[12:03:22.903] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[12:03:22.903] <TB1> INFO: number of Vcal hits detected: 203837 203564 200521 192316 189478 177382 180655 176479 182913 176035 180441 190315 194963 201038 204156 204192
[12:03:22.903] <TB1> INFO: Vcal hit fiducial efficiency (%): 98.2 98.0 97.0 93.2 92.1 86.5 88.1 85.7 88.8 85.8 87.8 92.4 94.3 97.2 98.3 98.3
[12:03:22.904] <TB1> INFO: Vcal hit overall efficiency (%): 98.0 97.9 96.4 92.5 91.1 85.3 86.9 84.8 87.9 84.6 86.8 91.5 93.7 96.7 98.2 98.2
[12:03:22.904] <TB1> INFO: X-ray hit rate [MHz/cm2]: 166.6 172.1 169.8 252.7 265.6 323.4 309.2 328.4 302.4 328.0 307.1 265.8 244.9 158.0 159.5 161.2
[12:03:22.904] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[12:03:22.933] <TB1> INFO: PixTest:: pg_setup set to default.
[12:03:22.946] <TB1> INFO: enter test to run
[12:03:22.946] <TB1> INFO: test: no parameter change
[12:03:23.273] <TB1> QUIET: Connection to board 147 closed.
[12:03:23.353] <TB1> INFO: pXar: this is the end, my friend