[10:29:29.778] <TB2> INFO: *** Welcome to pxar ***
[10:29:29.779] <TB2> INFO: *** Today: 2016/02/08
[10:29:29.842] <TB2> INFO: *** Version: 9751
[10:29:29.842] <TB2> INFO: readRocDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//000_PixelAlive_p17//dacParameters35_C15.dat
[10:29:29.843] <TB2> INFO: readTbmDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//000_PixelAlive_p17//tbmParameters_C0b.dat
[10:29:29.844] <TB2> INFO: readMaskFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//000_PixelAlive_p17//defaultMaskFile.dat
[10:29:29.844] <TB2> INFO: readTrimFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//000_PixelAlive_p17//trimParameters35_C15.dat
[10:29:29.916] <TB2> INFO: clk: 4
[10:29:29.916] <TB2> INFO: ctr: 4
[10:29:29.916] <TB2> INFO: sda: 19
[10:29:29.916] <TB2> INFO: tin: 9
[10:29:29.916] <TB2> INFO: level: 15
[10:29:29.916] <TB2> INFO: triggerdelay: 0
[10:29:29.916] <TB2> QUIET: Instanciating API for pxar prod-12
[10:29:29.916] <TB2> INFO: Log level: INFO
[10:29:29.928] <TB2> INFO: Found DTB DTB_WXENWR
[10:29:29.939] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:29:29.942] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:29:29.945] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[10:29:31.489] <TB2> INFO: DUT info:
[10:29:31.489] <TB2> INFO: The DUT currently contains the following objects:
[10:29:31.489] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:29:31.489] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:29:31.489] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:29:31.489] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:29:31.489] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.489] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:29:31.890] <TB2> INFO: enter 'restricted' command line mode
[10:29:31.891] <TB2> INFO: enter test to run
[10:29:31.891] <TB2> INFO: test: PixelAlive no parameter change
[10:29:31.891] <TB2> INFO: running: pixelalive
[10:29:31.900] <TB2> INFO: ######################################################################
[10:29:31.900] <TB2> INFO: PixTestAlive::doTest()
[10:29:31.900] <TB2> INFO: ######################################################################
[10:29:31.902] <TB2> INFO: ----------------------------------------------------------------------
[10:29:31.902] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:29:31.902] <TB2> INFO: ----------------------------------------------------------------------
[10:29:32.217] <TB2> INFO: Expecting 41600 events.
[10:29:36.561] <TB2> INFO: 41600 events read in total (3624ms).
[10:29:36.642] <TB2> INFO: Test took 4736ms.
[10:29:36.648] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:29:36.912] <TB2> INFO: PixTestAlive::aliveTest() done
[10:29:36.912] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 1 0 0 0 0 0 1 1 1 0 2 0 0
[10:29:36.914] <TB2> INFO: ----------------------------------------------------------------------
[10:29:36.914] <TB2> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:29:36.914] <TB2> INFO: ----------------------------------------------------------------------
[10:29:37.216] <TB2> INFO: Expecting 41600 events.
[10:29:40.337] <TB2> INFO: 41600 events read in total (2405ms).
[10:29:40.338] <TB2> INFO: Test took 3422ms.
[10:29:40.338] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:29:40.338] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:29:40.665] <TB2> INFO: PixTestAlive::maskTest() done
[10:29:40.665] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:29:40.668] <TB2> INFO: ----------------------------------------------------------------------
[10:29:40.668] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:29:40.668] <TB2> INFO: ----------------------------------------------------------------------
[10:29:40.996] <TB2> INFO: Expecting 41600 events.
[10:29:45.265] <TB2> INFO: 41600 events read in total (3553ms).
[10:29:45.265] <TB2> INFO: Test took 4595ms.
[10:29:45.271] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[10:29:45.579] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[10:29:45.579] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:29:45.579] <TB2> INFO: PixTestAlive::doTest() done, duration: 13 seconds
[10:29:45.608] <TB2> INFO: enter test to run
[10:29:45.608] <TB2> INFO: test: no parameter change
[10:29:45.782] <TB2> QUIET: Connection to board 162 closed.
[10:29:45.862] <TB2> INFO: pXar: this is the end, my friend

[10:35:08.350] <TB2> INFO: *** Welcome to pxar ***
[10:35:08.350] <TB2> INFO: *** Today: 2016/02/08
[10:35:08.417] <TB2> INFO: *** Version: 9751
[10:35:08.417] <TB2> INFO: readRocDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//dacParameters35_C15.dat
[10:35:08.418] <TB2> INFO: readTbmDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[10:35:08.418] <TB2> INFO: readMaskFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//defaultMaskFile.dat
[10:35:08.418] <TB2> INFO: readTrimFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C15.dat
[10:35:08.497] <TB2> INFO: clk: 4
[10:35:08.497] <TB2> INFO: ctr: 4
[10:35:08.497] <TB2> INFO: sda: 19
[10:35:08.497] <TB2> INFO: tin: 9
[10:35:08.497] <TB2> INFO: level: 15
[10:35:08.497] <TB2> INFO: triggerdelay: 0
[10:35:08.497] <TB2> QUIET: Instanciating API for pxar prod-12
[10:35:08.497] <TB2> INFO: Log level: INFO
[10:35:08.510] <TB2> INFO: Found DTB DTB_WXENWR
[10:35:08.521] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:35:08.525] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:35:08.528] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[10:35:10.071] <TB2> INFO: DUT info:
[10:35:10.071] <TB2> INFO: The DUT currently contains the following objects:
[10:35:10.071] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:35:10.071] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:35:10.071] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:35:10.072] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:35:10.072] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.072] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:35:10.472] <TB2> INFO: enter 'restricted' command line mode
[10:35:10.473] <TB2> INFO: enter test to run
[10:35:10.473] <TB2> INFO: test: delay setting parameters: ->5<-
[10:35:10.473] <TB2> INFO: delay test by 5 seconds...
[10:35:15.473] <TB2> INFO: enter test to run
[10:35:15.473] <TB2> INFO: test: highrate no parameter change
[10:35:15.473] <TB2> INFO: running: highrate
[10:35:15.473] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[10:35:15.643] <TB2> INFO: ----------------------------------------------------------------------
[10:35:15.643] <TB2> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[10:35:15.643] <TB2> INFO: ----------------------------------------------------------------------
[10:35:15.643] <TB2> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[10:35:15.643] <TB2> INFO: edge/corner pixel THR is adjusted
[10:35:15.643] <TB2> INFO: PixTestHighRate::trimHotPixels: step 0...
[10:35:16.608] <TB2> INFO: Collecting data for 1 seconds...
[10:35:17.609] <TB2> INFO: Done with hot pixel readout
[10:35:23.654] <TB2> INFO: PixTest:: pg_setup set to default.
[10:35:23.655] <TB2> INFO: 4 hot pixels found in step 0
[10:35:24.630] <TB2> INFO: Collecting data for 1 seconds...
[10:35:25.631] <TB2> INFO: Done with hot pixel readout
[10:35:31.554] <TB2> INFO: PixTest:: pg_setup set to default.
[10:35:31.555] <TB2> INFO: 4 hot pixels found in step 1
[10:35:32.520] <TB2> INFO: Collecting data for 1 seconds...
[10:35:33.521] <TB2> INFO: Done with hot pixel readout
[10:35:40.235] <TB2> INFO: PixTest:: pg_setup set to default.
[10:35:40.236] <TB2> INFO: 1 hot pixels found in step 2
[10:35:41.202] <TB2> INFO: Collecting data for 1 seconds...
[10:35:42.204] <TB2> INFO: Done with hot pixel readout
[10:35:48.715] <TB2> INFO: PixTest:: pg_setup set to default.
[10:35:48.717] <TB2> INFO: 1 hot pixels found in step 3
[10:35:49.685] <TB2> INFO: Collecting data for 1 seconds...
[10:35:50.687] <TB2> INFO: Done with hot pixel readout
[10:35:56.456] <TB2> INFO: PixTest:: pg_setup set to default.
[10:35:56.457] <TB2> INFO: 0 hot pixels found in step 4
[10:35:56.465] <TB2> INFO: 0 hot pixels could not be trimmed and have been masked.
[10:35:56.493] <TB2> INFO: PixTest::trimHotPixels() done
[10:35:56.493] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C0.dat
[10:35:56.499] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C1.dat
[10:35:56.506] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C2.dat
[10:35:56.512] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C3.dat
[10:35:56.519] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C4.dat
[10:35:56.525] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C5.dat
[10:35:56.532] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C6.dat
[10:35:56.538] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C7.dat
[10:35:56.545] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C8.dat
[10:35:56.551] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C9.dat
[10:35:56.558] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C10.dat
[10:35:56.564] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C11.dat
[10:35:56.570] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C12.dat
[10:35:56.577] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C13.dat
[10:35:56.583] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C14.dat
[10:35:56.590] <TB2> INFO: write trim parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//trimParameters35_C15.dat
[10:35:56.596] <TB2> INFO: write masked pixels into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//002_RetrimHotPixels_150//defaultMaskFile.dat
[10:35:56.628] <TB2> INFO: enter test to run
[10:35:56.628] <TB2> INFO: test: no parameter change
[10:35:56.811] <TB2> QUIET: Connection to board 162 closed.
[10:35:56.891] <TB2> INFO: pXar: this is the end, my friend

[10:36:23.533] <TB2> INFO: *** Welcome to pxar ***
[10:36:23.533] <TB2> INFO: *** Today: 2016/02/08
[10:36:23.597] <TB2> INFO: *** Version: 9751
[10:36:23.597] <TB2> INFO: readRocDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//dacParameters35_C15.dat
[10:36:23.598] <TB2> INFO: readTbmDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//tbmParameters_C0b.dat
[10:36:23.599] <TB2> INFO: readMaskFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//defaultMaskFile.dat
[10:36:23.599] <TB2> INFO: readTrimFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//trimParameters35_C15.dat
[10:36:23.686] <TB2> INFO: clk: 4
[10:36:23.686] <TB2> INFO: ctr: 4
[10:36:23.686] <TB2> INFO: sda: 19
[10:36:23.686] <TB2> INFO: tin: 9
[10:36:23.686] <TB2> INFO: level: 15
[10:36:23.686] <TB2> INFO: triggerdelay: 0
[10:36:23.686] <TB2> QUIET: Instanciating API for pxar prod-12
[10:36:23.686] <TB2> INFO: Log level: INFO
[10:36:23.699] <TB2> INFO: Found DTB DTB_WXENWR
[10:36:23.711] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:36:23.714] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:36:23.716] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[10:36:25.276] <TB2> INFO: DUT info:
[10:36:25.277] <TB2> INFO: The DUT currently contains the following objects:
[10:36:25.277] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:36:25.277] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:36:25.277] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:36:25.277] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:36:25.277] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.277] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:36:25.678] <TB2> INFO: enter 'restricted' command line mode
[10:36:25.678] <TB2> INFO: enter test to run
[10:36:25.678] <TB2> INFO: test: delay setting parameters: ->5<-
[10:36:25.678] <TB2> INFO: delay test by 5 seconds...
[10:36:30.678] <TB2> INFO: enter test to run
[10:36:30.678] <TB2> INFO: test: Xray no parameter change
[10:36:30.678] <TB2> INFO: running: xray
[10:36:30.678] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//003_HRData_50//phCalibrationFitErr35_C15.dat
[10:36:30.811] <TB2> INFO: ######################################################################
[10:36:30.811] <TB2> INFO: PixTestXray::doTest()
[10:36:30.811] <TB2> INFO: ######################################################################
[10:36:30.811] <TB2> INFO: ----------------------------------------------------------------------
[10:36:30.811] <TB2> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[10:36:30.811] <TB2> INFO: ----------------------------------------------------------------------
[10:36:31.781] <TB2> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[10:36:38.139] <TB2> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[10:37:02.336] <TB2> INFO: Resuming triggers.
[10:37:08.709] <TB2> INFO: run duration 12 seconds, buffer almost full (81%), pausing triggers.
[10:37:32.944] <TB2> INFO: Resuming triggers.
[10:37:39.312] <TB2> INFO: run duration 19 seconds, buffer almost full (81%), pausing triggers.
[10:38:03.096] <TB2> INFO: Resuming triggers.
[10:38:09.464] <TB2> INFO: run duration 25 seconds, buffer almost full (81%), pausing triggers.
[10:38:32.775] <TB2> INFO: Resuming triggers.
[10:38:39.141] <TB2> INFO: run duration 31 seconds, buffer almost full (81%), pausing triggers.
[10:39:02.352] <TB2> INFO: Resuming triggers.
[10:39:08.720] <TB2> INFO: run duration 38 seconds, buffer almost full (81%), pausing triggers.
[10:39:33.322] <TB2> INFO: Resuming triggers.
[10:39:39.687] <TB2> INFO: run duration 44 seconds, buffer almost full (81%), pausing triggers.
[10:40:04.478] <TB2> INFO: Resuming triggers.
[10:40:10.839] <TB2> INFO: run duration 50 seconds, buffer almost full (81%), pausing triggers.
[10:40:34.785] <TB2> INFO: Resuming triggers.
[10:40:41.148] <TB2> INFO: run duration 57 seconds, buffer almost full (81%), pausing triggers.
[10:41:05.199] <TB2> INFO: Resuming triggers.
[10:41:11.564] <TB2> INFO: run duration 63 seconds, buffer almost full (81%), pausing triggers.
[10:41:35.057] <TB2> INFO: Resuming triggers.
[10:41:41.416] <TB2> INFO: run duration 69 seconds, buffer almost full (81%), pausing triggers.
[10:42:05.739] <TB2> INFO: Resuming triggers.
[10:42:12.102] <TB2> INFO: run duration 76 seconds, buffer almost full (81%), pausing triggers.
[10:42:35.758] <TB2> INFO: Resuming triggers.
[10:42:42.117] <TB2> INFO: run duration 82 seconds, buffer almost full (81%), pausing triggers.
[10:43:05.499] <TB2> INFO: Resuming triggers.
[10:43:11.861] <TB2> INFO: run duration 89 seconds, buffer almost full (81%), pausing triggers.
[10:43:36.102] <TB2> INFO: Resuming triggers.
[10:43:42.462] <TB2> INFO: run duration 95 seconds, buffer almost full (81%), pausing triggers.
[10:44:05.955] <TB2> INFO: Resuming triggers.
[10:44:10.553] <TB2> INFO: data taking finished, elapsed time: 100 seconds.
[10:44:28.298] <TB2> INFO: PixTest:: pg_setup set to default.
[10:44:28.300] <TB2> INFO: PixTestXray::doPhRun() done
[10:44:28.300] <TB2> INFO: PixTestXray::doTest() done
[10:44:28.481] <TB2> INFO: enter test to run
[10:44:28.482] <TB2> INFO: test: no parameter change
[10:44:28.684] <TB2> QUIET: Connection to board 162 closed.
[10:44:28.765] <TB2> INFO: pXar: this is the end, my friend

[10:46:43.259] <TB2> INFO: *** Welcome to pxar ***
[10:46:43.259] <TB2> INFO: *** Today: 2016/02/08
[10:46:43.324] <TB2> INFO: *** Version: 9751
[10:46:43.324] <TB2> INFO: readRocDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//dacParameters35_C15.dat
[10:46:43.325] <TB2> INFO: readTbmDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//tbmParameters_C0b.dat
[10:46:43.325] <TB2> INFO: readMaskFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//defaultMaskFile.dat
[10:46:43.325] <TB2> INFO: readTrimFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//trimParameters35_C15.dat
[10:46:43.403] <TB2> INFO: clk: 4
[10:46:43.403] <TB2> INFO: ctr: 4
[10:46:43.403] <TB2> INFO: sda: 19
[10:46:43.403] <TB2> INFO: tin: 9
[10:46:43.403] <TB2> INFO: level: 15
[10:46:43.403] <TB2> INFO: triggerdelay: 0
[10:46:43.403] <TB2> QUIET: Instanciating API for pxar prod-12
[10:46:43.404] <TB2> INFO: Log level: INFO
[10:46:43.416] <TB2> INFO: Found DTB DTB_WXENWR
[10:46:43.428] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[10:46:43.434] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[10:46:43.437] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[10:46:44.996] <TB2> INFO: DUT info:
[10:46:44.996] <TB2> INFO: The DUT currently contains the following objects:
[10:46:44.996] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[10:46:44.996] <TB2> INFO: TBM Core alpha (0): 7 registers set
[10:46:44.996] <TB2> INFO: TBM Core beta (1): 7 registers set
[10:46:44.997] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:46:44.997] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:44.997] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:46:45.398] <TB2> INFO: enter 'restricted' command line mode
[10:46:45.398] <TB2> INFO: enter test to run
[10:46:45.398] <TB2> INFO: test: delay setting parameters: ->5<-
[10:46:45.398] <TB2> INFO: delay test by 5 seconds...
[10:46:50.398] <TB2> INFO: enter test to run
[10:46:50.398] <TB2> INFO: test: Xray no parameter change
[10:46:50.398] <TB2> INFO: running: xray
[10:46:50.398] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//004_HRData_150//phCalibrationFitErr35_C15.dat
[10:46:50.560] <TB2> INFO: ######################################################################
[10:46:50.560] <TB2> INFO: PixTestXray::doTest()
[10:46:50.560] <TB2> INFO: ######################################################################
[10:46:50.560] <TB2> INFO: ----------------------------------------------------------------------
[10:46:50.560] <TB2> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[10:46:50.560] <TB2> INFO: ----------------------------------------------------------------------
[10:46:51.530] <TB2> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[10:46:54.928] <TB2> INFO: run duration 3 seconds, buffer almost full (81%), pausing triggers.
[10:47:19.084] <TB2> INFO: Resuming triggers.
[10:47:22.491] <TB2> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[10:47:48.055] <TB2> INFO: Resuming triggers.
[10:47:51.462] <TB2> INFO: run duration 10 seconds, buffer almost full (81%), pausing triggers.
[10:48:16.965] <TB2> INFO: Resuming triggers.
[10:48:20.373] <TB2> INFO: run duration 13 seconds, buffer almost full (81%), pausing triggers.
[10:48:45.429] <TB2> INFO: Resuming triggers.
[10:48:48.838] <TB2> INFO: run duration 17 seconds, buffer almost full (81%), pausing triggers.
[10:49:13.493] <TB2> INFO: Resuming triggers.
[10:49:16.900] <TB2> INFO: run duration 20 seconds, buffer almost full (81%), pausing triggers.
[10:49:41.727] <TB2> INFO: Resuming triggers.
[10:49:45.131] <TB2> INFO: run duration 23 seconds, buffer almost full (81%), pausing triggers.
[10:50:10.614] <TB2> INFO: Resuming triggers.
[10:50:14.016] <TB2> INFO: run duration 27 seconds, buffer almost full (81%), pausing triggers.
[10:50:38.235] <TB2> INFO: Resuming triggers.
[10:50:41.637] <TB2> INFO: run duration 30 seconds, buffer almost full (81%), pausing triggers.
[10:51:07.136] <TB2> INFO: Resuming triggers.
[10:51:10.541] <TB2> INFO: run duration 34 seconds, buffer almost full (81%), pausing triggers.
[10:51:35.842] <TB2> INFO: Resuming triggers.
[10:51:39.248] <TB2> INFO: run duration 37 seconds, buffer almost full (81%), pausing triggers.
[10:52:04.098] <TB2> INFO: Resuming triggers.
[10:52:07.499] <TB2> INFO: run duration 40 seconds, buffer almost full (81%), pausing triggers.
[10:52:31.750] <TB2> INFO: Resuming triggers.
[10:52:35.147] <TB2> INFO: run duration 44 seconds, buffer almost full (81%), pausing triggers.
[10:52:59.660] <TB2> INFO: Resuming triggers.
[10:53:03.057] <TB2> INFO: run duration 47 seconds, buffer almost full (81%), pausing triggers.
[10:53:28.205] <TB2> INFO: Resuming triggers.
[10:53:31.603] <TB2> INFO: run duration 51 seconds, buffer almost full (81%), pausing triggers.
[10:53:57.933] <TB2> INFO: Resuming triggers.
[10:54:01.330] <TB2> INFO: run duration 54 seconds, buffer almost full (81%), pausing triggers.
[10:54:27.526] <TB2> INFO: Resuming triggers.
[10:54:30.920] <TB2> INFO: run duration 57 seconds, buffer almost full (81%), pausing triggers.
[10:54:55.108] <TB2> INFO: Resuming triggers.
[10:54:58.506] <TB2> INFO: run duration 61 seconds, buffer almost full (81%), pausing triggers.
[10:55:23.166] <TB2> INFO: Resuming triggers.
[10:55:26.565] <TB2> INFO: run duration 64 seconds, buffer almost full (81%), pausing triggers.
[10:55:51.472] <TB2> INFO: Resuming triggers.
[10:55:54.871] <TB2> INFO: run duration 67 seconds, buffer almost full (81%), pausing triggers.
[10:56:20.089] <TB2> INFO: Resuming triggers.
[10:56:23.484] <TB2> INFO: run duration 71 seconds, buffer almost full (81%), pausing triggers.
[10:56:47.977] <TB2> INFO: Resuming triggers.
[10:56:51.372] <TB2> INFO: run duration 74 seconds, buffer almost full (81%), pausing triggers.
[10:57:15.464] <TB2> INFO: Resuming triggers.
[10:57:18.859] <TB2> INFO: run duration 78 seconds, buffer almost full (81%), pausing triggers.
[10:57:43.861] <TB2> INFO: Resuming triggers.
[10:57:47.253] <TB2> INFO: run duration 81 seconds, buffer almost full (81%), pausing triggers.
[10:58:13.952] <TB2> INFO: Resuming triggers.
[10:58:17.344] <TB2> INFO: run duration 84 seconds, buffer almost full (81%), pausing triggers.
[10:58:42.004] <TB2> INFO: Resuming triggers.
[10:58:45.398] <TB2> INFO: run duration 88 seconds, buffer almost full (81%), pausing triggers.
[10:59:09.547] <TB2> INFO: Resuming triggers.
[10:59:12.941] <TB2> INFO: run duration 91 seconds, buffer almost full (81%), pausing triggers.
[10:59:37.454] <TB2> INFO: Resuming triggers.
[10:59:40.846] <TB2> INFO: run duration 95 seconds, buffer almost full (81%), pausing triggers.
[11:00:06.931] <TB2> INFO: Resuming triggers.
[11:00:10.325] <TB2> INFO: run duration 98 seconds, buffer almost full (81%), pausing triggers.
[11:00:33.896] <TB2> INFO: Resuming triggers.
[11:00:35.375] <TB2> INFO: data taking finished, elapsed time: 100 seconds.
[11:00:45.893] <TB2> INFO: PixTest:: pg_setup set to default.
[11:00:45.895] <TB2> INFO: PixTestXray::doPhRun() done
[11:00:45.895] <TB2> INFO: PixTestXray::doTest() done
[11:00:46.080] <TB2> INFO: enter test to run
[11:00:46.080] <TB2> INFO: test: no parameter change
[11:00:46.275] <TB2> QUIET: Connection to board 162 closed.
[11:00:46.354] <TB2> INFO: pXar: this is the end, my friend

[11:04:44.143] <TB2> INFO: *** Welcome to pxar ***
[11:04:44.143] <TB2> INFO: *** Today: 2016/02/08
[11:04:44.207] <TB2> INFO: *** Version: 9751
[11:04:44.208] <TB2> INFO: readRocDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//dacParameters35_C15.dat
[11:04:44.208] <TB2> INFO: readTbmDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//tbmParameters_C0b.dat
[11:04:44.208] <TB2> INFO: readMaskFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//defaultMaskFile.dat
[11:04:44.208] <TB2> INFO: readTrimFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//trimParameters35_C15.dat
[11:04:44.278] <TB2> INFO: clk: 4
[11:04:44.278] <TB2> INFO: ctr: 4
[11:04:44.278] <TB2> INFO: sda: 19
[11:04:44.278] <TB2> INFO: tin: 9
[11:04:44.278] <TB2> INFO: level: 15
[11:04:44.278] <TB2> INFO: triggerdelay: 0
[11:04:44.278] <TB2> QUIET: Instanciating API for pxar prod-12
[11:04:44.278] <TB2> INFO: Log level: INFO
[11:04:44.291] <TB2> INFO: Found DTB DTB_WXENWR
[11:04:44.302] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[11:04:44.306] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[11:04:44.308] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[11:04:45.880] <TB2> INFO: DUT info:
[11:04:45.880] <TB2> INFO: The DUT currently contains the following objects:
[11:04:45.880] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[11:04:45.880] <TB2> INFO: TBM Core alpha (0): 7 registers set
[11:04:45.880] <TB2> INFO: TBM Core beta (1): 7 registers set
[11:04:45.880] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:04:45.880] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:45.880] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:04:46.281] <TB2> INFO: enter 'restricted' command line mode
[11:04:46.281] <TB2> INFO: enter test to run
[11:04:46.281] <TB2> INFO: test: Highrate no parameter change
[11:04:46.281] <TB2> INFO: running: highrate
[11:04:46.281] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//005_HRSCurves_100//phCalibrationFitErr35_C15.dat
[11:04:46.460] <TB2> INFO: ----------------------------------------------------------------------
[11:04:46.460] <TB2> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[11:04:46.460] <TB2> INFO: ----------------------------------------------------------------------
[11:04:46.467] <TB2> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 15 .. 75 (20/-1) hits flags = 896 (plus default)
[11:04:46.479] <TB2> INFO: dacScan step from 15 .. 34
[11:04:46.479] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[11:04:46.479] <TB2> INFO: run 1 of 1
[11:04:47.113] <TB2> INFO: Expecting 4160000 events.
[11:05:15.833] <TB2> INFO: 439650 events read in total (28189ms).
[11:05:44.683] <TB2> INFO: 881950 events read in total (57039ms).
[11:06:13.563] <TB2> INFO: 1324100 events read in total (85919ms).
[11:06:42.069] <TB2> INFO: 1766250 events read in total (114425ms).
[11:07:10.344] <TB2> INFO: 2208650 events read in total (142700ms).
[11:07:39.260] <TB2> INFO: 2650900 events read in total (171616ms).
[11:08:07.867] <TB2> INFO: 3093250 events read in total (200223ms).
[11:08:36.449] <TB2> INFO: 3535200 events read in total (228805ms).
[11:09:04.918] <TB2> INFO: 3976900 events read in total (257274ms).
[11:09:16.838] <TB2> INFO: 4160000 events read in total (269194ms).
[11:09:17.110] <TB2> INFO: Test took 270631ms.
[11:09:22.445] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:09:28.461] <TB2> INFO: dacScan step from 35 .. 54
[11:09:28.461] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[11:09:28.461] <TB2> INFO: run 1 of 1
[11:09:29.061] <TB2> INFO: Expecting 4160000 events.
[11:09:56.469] <TB2> INFO: 371400 events read in total (26881ms).
[11:10:24.151] <TB2> INFO: 743150 events read in total (54563ms).
[11:10:51.454] <TB2> INFO: 1114100 events read in total (81866ms).
[11:11:18.335] <TB2> INFO: 1484150 events read in total (108747ms).
[11:11:45.672] <TB2> INFO: 1853450 events read in total (136084ms).
[11:12:12.484] <TB2> INFO: 2220600 events read in total (162896ms).
[11:12:39.296] <TB2> INFO: 2585400 events read in total (189708ms).
[11:13:06.378] <TB2> INFO: 2947500 events read in total (216790ms).
[11:13:33.156] <TB2> INFO: 3307100 events read in total (243568ms).
[11:14:00.448] <TB2> INFO: 3664700 events read in total (270860ms).
[11:14:27.052] <TB2> INFO: 4021250 events read in total (297464ms).
[11:14:37.544] <TB2> INFO: 4160000 events read in total (307956ms).
[11:14:37.789] <TB2> INFO: Test took 309328ms.
[11:14:40.497] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:14:46.519] <TB2> INFO: dacScan step from 55 .. 74
[11:14:46.519] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[11:14:46.519] <TB2> INFO: run 1 of 1
[11:14:47.116] <TB2> INFO: Expecting 4160000 events.
[11:15:14.686] <TB2> INFO: 329350 events read in total (27042ms).
[11:15:40.864] <TB2> INFO: 659750 events read in total (53220ms).
[11:16:06.855] <TB2> INFO: 989850 events read in total (79211ms).
[11:16:32.841] <TB2> INFO: 1320450 events read in total (105197ms).
[11:16:59.525] <TB2> INFO: 1650850 events read in total (131881ms).
[11:17:25.894] <TB2> INFO: 1981200 events read in total (158250ms).
[11:17:52.061] <TB2> INFO: 2312000 events read in total (184417ms).
[11:18:18.222] <TB2> INFO: 2642450 events read in total (210578ms).
[11:18:44.754] <TB2> INFO: 2972800 events read in total (237110ms).
[11:19:10.796] <TB2> INFO: 3303100 events read in total (263152ms).
[11:19:37.112] <TB2> INFO: 3633750 events read in total (289468ms).
[11:20:03.761] <TB2> INFO: 3964050 events read in total (316117ms).
[11:20:19.336] <TB2> INFO: 4160000 events read in total (331692ms).
[11:20:19.551] <TB2> INFO: Test took 333032ms.
[11:20:21.957] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:20:27.404] <TB2> INFO: dacScan step from 75 .. 75
[11:20:27.404] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[11:20:27.404] <TB2> INFO: run 1 of 1
[11:20:28.001] <TB2> INFO: Expecting 208000 events.
[11:20:45.753] <TB2> INFO: 208000 events read in total (17225ms).
[11:20:45.761] <TB2> INFO: Test took 18357ms.
[11:20:45.848] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:20:46.119] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:20:47.290] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:20:48.356] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:20:49.435] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:20:50.590] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:20:51.804] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:20:52.943] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:20:54.032] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:20:55.114] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:20:56.188] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:20:57.269] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:20:58.432] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:20:59.541] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:21:00.639] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:21:01.697] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:21:02.745] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[11:21:03.791] <TB2> INFO: PixTest:: pg_setup set to default.
[11:21:03.792] <TB2> INFO: vcal mean: 38.53 39.62 38.50 41.31 42.09 43.00 42.60 42.87 41.78 42.85 42.94 42.66 41.17 38.76 39.79 38.58
[11:21:03.792] <TB2> INFO: vcal RMS: 1.24 1.27 0.94 1.45 1.21 1.39 1.44 1.47 1.36 1.52 1.58 1.61 1.34 1.37 1.18 1.04
[11:21:03.792] <TB2> INFO: number of X-ray hits detected: 211911 222926 187025 331636 349324 422558 385402 414504 377918 412643 429076 372223 319408 197302 234538 210150
[11:21:03.792] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:21:03.792] <TB2> INFO: X-ray hit rate [MHz/cm2]: 62.1 65.3 54.8 97.2 102.4 123.9 113.0 121.5 110.8 120.9 125.8 109.1 93.6 57.8 68.7 61.6
[11:21:03.792] <TB2> INFO: PixTestHighRate::doXNoiseMaps() done
[11:21:03.909] <TB2> INFO: enter test to run
[11:21:03.909] <TB2> INFO: test: no parameter change
[11:21:04.098] <TB2> QUIET: Connection to board 162 closed.
[11:21:04.180] <TB2> INFO: pXar: this is the end, my friend

[11:52:25.468] <TB2> INFO: *** Welcome to pxar ***
[11:52:25.468] <TB2> INFO: *** Today: 2016/02/08
[11:52:25.534] <TB2> INFO: *** Version: 9751
[11:52:25.534] <TB2> INFO: readRocDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[11:52:25.535] <TB2> INFO: readTbmDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[11:52:25.535] <TB2> INFO: readMaskFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[11:52:25.535] <TB2> INFO: readTrimFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[11:52:25.624] <TB2> INFO: clk: 4
[11:52:25.624] <TB2> INFO: ctr: 4
[11:52:25.624] <TB2> INFO: sda: 19
[11:52:25.624] <TB2> INFO: tin: 9
[11:52:25.624] <TB2> INFO: level: 15
[11:52:25.624] <TB2> INFO: triggerdelay: 0
[11:52:25.624] <TB2> QUIET: Instanciating API for pxar prod-12
[11:52:25.624] <TB2> INFO: Log level: INFO
[11:52:25.636] <TB2> INFO: Found DTB DTB_WXENWR
[11:52:25.647] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[11:52:25.651] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[11:52:25.653] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[11:52:27.230] <TB2> INFO: DUT info:
[11:52:27.230] <TB2> INFO: The DUT currently contains the following objects:
[11:52:27.230] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[11:52:27.230] <TB2> INFO: TBM Core alpha (0): 7 registers set
[11:52:27.230] <TB2> INFO: TBM Core beta (1): 7 registers set
[11:52:27.230] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:52:27.230] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.230] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:52:27.631] <TB2> INFO: enter 'restricted' command line mode
[11:52:27.631] <TB2> INFO: enter test to run
[11:52:27.631] <TB2> INFO: test: HighRate no parameter change
[11:52:27.631] <TB2> INFO: running: highrate
[11:52:27.631] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[11:52:27.800] <TB2> INFO: ----------------------------------------------------------------------
[11:52:27.800] <TB2> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[11:52:27.800] <TB2> INFO: ----------------------------------------------------------------------
[11:52:27.940] <TB2> INFO: Expecting 768 events.
[11:52:29.170] <TB2> INFO: 768 events read in total (511ms).
[11:52:29.265] <TB2> INFO: Test took 1459ms.
[11:52:29.903] <TB2> INFO: Expecting 41600 events.
[11:52:33.538] <TB2> INFO: 41600 events read in total (3108ms).
[11:52:33.540] <TB2> INFO: Test took 4270ms.
[11:52:33.618] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:52:34.263] <TB2> INFO: Expecting 41600 events.
[11:52:37.812] <TB2> INFO: 41600 events read in total (3021ms).
[11:52:37.814] <TB2> INFO: Test took 4165ms.
[11:52:37.905] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:52:38.563] <TB2> INFO: Expecting 41600 events.
[11:52:42.237] <TB2> INFO: 41600 events read in total (3146ms).
[11:52:42.239] <TB2> INFO: Test took 4299ms.
[11:52:42.331] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:52:42.994] <TB2> INFO: Expecting 41600 events.
[11:52:46.638] <TB2> INFO: 41600 events read in total (3116ms).
[11:52:46.640] <TB2> INFO: Test took 4271ms.
[11:52:46.729] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:52:47.383] <TB2> INFO: Expecting 41600 events.
[11:52:50.974] <TB2> INFO: 41600 events read in total (3064ms).
[11:52:50.976] <TB2> INFO: Test took 4209ms.
[11:52:51.063] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:52:51.706] <TB2> INFO: Expecting 41600 events.
[11:52:55.345] <TB2> INFO: 41600 events read in total (3112ms).
[11:52:55.347] <TB2> INFO: Test took 4253ms.
[11:52:55.429] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:52:56.078] <TB2> INFO: Expecting 41600 events.
[11:52:59.756] <TB2> INFO: 41600 events read in total (3150ms).
[11:52:59.759] <TB2> INFO: Test took 4299ms.
[11:52:59.838] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:00.481] <TB2> INFO: Expecting 41600 events.
[11:53:04.099] <TB2> INFO: 41600 events read in total (3090ms).
[11:53:04.101] <TB2> INFO: Test took 4233ms.
[11:53:04.182] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:04.826] <TB2> INFO: Expecting 41600 events.
[11:53:08.487] <TB2> INFO: 41600 events read in total (3133ms).
[11:53:08.489] <TB2> INFO: Test took 4276ms.
[11:53:08.577] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:09.227] <TB2> INFO: Expecting 41600 events.
[11:53:12.903] <TB2> INFO: 41600 events read in total (3148ms).
[11:53:12.906] <TB2> INFO: Test took 4293ms.
[11:53:12.996] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:13.660] <TB2> INFO: Expecting 41600 events.
[11:53:17.330] <TB2> INFO: 41600 events read in total (3142ms).
[11:53:17.332] <TB2> INFO: Test took 4299ms.
[11:53:17.413] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:18.057] <TB2> INFO: Expecting 41600 events.
[11:53:21.701] <TB2> INFO: 41600 events read in total (3116ms).
[11:53:21.703] <TB2> INFO: Test took 4258ms.
[11:53:21.791] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:22.442] <TB2> INFO: Expecting 41600 events.
[11:53:26.116] <TB2> INFO: 41600 events read in total (3146ms).
[11:53:26.118] <TB2> INFO: Test took 4289ms.
[11:53:26.196] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:26.839] <TB2> INFO: Expecting 41600 events.
[11:53:30.446] <TB2> INFO: 41600 events read in total (3079ms).
[11:53:30.448] <TB2> INFO: Test took 4221ms.
[11:53:30.527] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:31.176] <TB2> INFO: Expecting 41600 events.
[11:53:34.906] <TB2> INFO: 41600 events read in total (3202ms).
[11:53:34.909] <TB2> INFO: Test took 4352ms.
[11:53:34.999] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:35.662] <TB2> INFO: Expecting 41600 events.
[11:53:39.333] <TB2> INFO: 41600 events read in total (3143ms).
[11:53:39.335] <TB2> INFO: Test took 4298ms.
[11:53:39.415] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:40.059] <TB2> INFO: Expecting 41600 events.
[11:53:43.702] <TB2> INFO: 41600 events read in total (3115ms).
[11:53:43.704] <TB2> INFO: Test took 4258ms.
[11:53:43.787] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:44.431] <TB2> INFO: Expecting 41600 events.
[11:53:48.125] <TB2> INFO: 41600 events read in total (3166ms).
[11:53:48.127] <TB2> INFO: Test took 4309ms.
[11:53:48.216] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:48.866] <TB2> INFO: Expecting 41600 events.
[11:53:52.536] <TB2> INFO: 41600 events read in total (3142ms).
[11:53:52.538] <TB2> INFO: Test took 4285ms.
[11:53:52.616] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:53.260] <TB2> INFO: Expecting 41600 events.
[11:53:56.792] <TB2> INFO: 41600 events read in total (3004ms).
[11:53:56.794] <TB2> INFO: Test took 4147ms.
[11:53:56.875] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:53:57.239] <TB2> INFO: enter test to run
[11:53:57.239] <TB2> INFO: test: Pretest no parameter change
[11:53:57.239] <TB2> INFO: running: pretest
[11:53:57.240] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[11:53:57.240] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[11:53:57.240] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[11:53:57.240] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[11:53:57.240] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[11:53:57.240] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[11:53:57.241] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[11:53:57.241] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[11:53:57.241] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[11:53:57.241] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[11:53:57.241] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[11:53:57.241] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[11:53:57.241] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[11:53:57.242] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[11:53:57.242] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[11:53:57.242] <TB2> INFO: write dac parameters into /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[11:53:57.242] <TB2> INFO: enter test to run
[11:53:57.242] <TB2> INFO: test: no parameter change
[11:53:57.412] <TB2> QUIET: Connection to board 162 closed.
[11:53:57.491] <TB2> INFO: pXar: this is the end, my friend

[11:54:33.402] <TB2> INFO: *** Welcome to pxar ***
[11:54:33.402] <TB2> INFO: *** Today: 2016/02/08
[11:54:33.467] <TB2> INFO: *** Version: 9751
[11:54:33.467] <TB2> INFO: readRocDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//dacParameters35_C15.dat
[11:54:33.468] <TB2> INFO: readTbmDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//tbmParameters_C0b.dat
[11:54:33.468] <TB2> INFO: readMaskFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//defaultMaskFile.dat
[11:54:33.468] <TB2> INFO: readTrimFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//trimParameters35_C15.dat
[11:54:33.540] <TB2> INFO: clk: 4
[11:54:33.540] <TB2> INFO: ctr: 4
[11:54:33.540] <TB2> INFO: sda: 19
[11:54:33.540] <TB2> INFO: tin: 9
[11:54:33.540] <TB2> INFO: level: 15
[11:54:33.540] <TB2> INFO: triggerdelay: 0
[11:54:33.540] <TB2> QUIET: Instanciating API for pxar prod-12
[11:54:33.540] <TB2> INFO: Log level: INFO
[11:54:33.553] <TB2> INFO: Found DTB DTB_WXENWR
[11:54:33.564] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[11:54:33.568] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[11:54:33.570] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[11:54:35.117] <TB2> INFO: DUT info:
[11:54:35.117] <TB2> INFO: The DUT currently contains the following objects:
[11:54:35.117] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[11:54:35.118] <TB2> INFO: TBM Core alpha (0): 7 registers set
[11:54:35.118] <TB2> INFO: TBM Core beta (1): 7 registers set
[11:54:35.118] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:54:35.118] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.118] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:54:35.519] <TB2> INFO: enter 'restricted' command line mode
[11:54:35.519] <TB2> INFO: enter test to run
[11:54:35.519] <TB2> INFO: test: PixelAlive no parameter change
[11:54:35.519] <TB2> INFO: running: pixelalive
[11:54:35.523] <TB2> INFO: ######################################################################
[11:54:35.523] <TB2> INFO: PixTestAlive::doTest()
[11:54:35.523] <TB2> INFO: ######################################################################
[11:54:35.525] <TB2> INFO: ----------------------------------------------------------------------
[11:54:35.525] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:54:35.525] <TB2> INFO: ----------------------------------------------------------------------
[11:54:35.867] <TB2> INFO: Expecting 208000 events.
[11:54:46.136] <TB2> INFO: 208000 events read in total (9550ms).
[11:54:46.157] <TB2> INFO: Test took 10630ms.
[11:54:46.166] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:54:46.432] <TB2> INFO: PixTestAlive::aliveTest() done
[11:54:46.432] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
[11:54:46.433] <TB2> INFO: ----------------------------------------------------------------------
[11:54:46.433] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:54:46.433] <TB2> INFO: ----------------------------------------------------------------------
[11:54:46.750] <TB2> INFO: Expecting 208000 events.
[11:54:53.444] <TB2> INFO: 208000 events read in total (5977ms).
[11:54:53.445] <TB2> INFO: Test took 7009ms.
[11:54:53.445] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:54:53.446] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:54:53.770] <TB2> INFO: PixTestAlive::maskTest() done
[11:54:53.770] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:54:53.771] <TB2> INFO: ----------------------------------------------------------------------
[11:54:53.771] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:54:53.771] <TB2> INFO: ----------------------------------------------------------------------
[11:54:54.077] <TB2> INFO: Expecting 208000 events.
[11:55:04.221] <TB2> INFO: 208000 events read in total (9428ms).
[11:55:04.221] <TB2> INFO: Test took 10447ms.
[11:55:04.230] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:55:04.473] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[11:55:04.473] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:55:04.473] <TB2> INFO: PixTestAlive::doTest() done, duration: 28 seconds
[11:55:04.502] <TB2> INFO: enter test to run
[11:55:04.502] <TB2> INFO: test: delay setting parameters: ->2<-
[11:55:04.502] <TB2> INFO: delay test by 2 seconds...
[11:55:06.502] <TB2> INFO: enter test to run
[11:55:06.502] <TB2> INFO: test: HighRate no parameter change
[11:55:06.502] <TB2> INFO: running: highrate
[11:55:06.503] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//011_HREfficiency_50//phCalibrationFitErr35_C15.dat
[11:55:06.681] <TB2> INFO: ----------------------------------------------------------------------
[11:55:06.681] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:55:06.681] <TB2> INFO: ----------------------------------------------------------------------
[11:55:07.306] <TB2> INFO: Expecting 208000 events.
[11:55:20.895] <TB2> INFO: 208000 events read in total (13061ms).
[11:55:20.901] <TB2> INFO: Test took 14215ms.
[11:55:21.185] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:55:21.472] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
[11:55:21.472] <TB2> INFO: number of red-efficiency pixels: 124 121 141 225 245 360 278 359 248 359 377 287 212 131 154 130
[11:55:21.472] <TB2> INFO: number of X-ray hits detected: 105260 109747 90382 166836 174803 213383 192372 207280 188051 207135 218092 185782 158176 95898 115816 104084
[11:55:21.472] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:55:21.472] <TB2> INFO: number of Vcal hits detected: 207872 207878 207847 207766 207739 207618 207708 207622 207742 207615 207526 207701 207780 207813 207843 207868
[11:55:21.472] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.9 99.9 99.8 99.9 99.8 99.9 99.8 99.8 99.9 99.9 99.9 99.9 99.9
[11:55:21.472] <TB2> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.9 99.9 99.8 99.9 99.8 99.9 99.8 99.8 99.9 99.9 99.9 99.9 99.9
[11:55:21.473] <TB2> INFO: X-ray hit rate [MHz/cm2]: 30.9 32.2 26.5 48.9 51.2 62.5 56.4 60.8 55.1 60.7 63.9 54.5 46.4 28.1 33.9 30.5
[11:55:21.473] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[11:55:21.517] <TB2> INFO: PixTest:: pg_setup set to default.
[11:55:21.529] <TB2> INFO: enter test to run
[11:55:21.529] <TB2> INFO: test: no parameter change
[11:55:21.753] <TB2> QUIET: Connection to board 162 closed.
[11:55:21.833] <TB2> INFO: pXar: this is the end, my friend

[11:55:58.175] <TB2> INFO: *** Welcome to pxar ***
[11:55:58.175] <TB2> INFO: *** Today: 2016/02/08
[11:55:58.247] <TB2> INFO: *** Version: 9751
[11:55:58.247] <TB2> INFO: readRocDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//dacParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//dacParameters35_C15.dat
[11:55:58.248] <TB2> INFO: readTbmDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//tbmParameters_C0a.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//tbmParameters_C0b.dat
[11:55:58.248] <TB2> INFO: readMaskFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//defaultMaskFile.dat
[11:55:58.248] <TB2> INFO: readTrimFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//trimParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//trimParameters35_C15.dat
[11:55:58.339] <TB2> INFO: clk: 4
[11:55:58.339] <TB2> INFO: ctr: 4
[11:55:58.339] <TB2> INFO: sda: 19
[11:55:58.339] <TB2> INFO: tin: 9
[11:55:58.339] <TB2> INFO: level: 15
[11:55:58.339] <TB2> INFO: triggerdelay: 0
[11:55:58.339] <TB2> QUIET: Instanciating API for pxar prod-12
[11:55:58.339] <TB2> INFO: Log level: INFO
[11:55:58.352] <TB2> INFO: Found DTB DTB_WXENWR
[11:55:58.364] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[11:55:58.367] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[11:55:58.370] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[11:55:59.931] <TB2> INFO: DUT info:
[11:55:59.931] <TB2> INFO: The DUT currently contains the following objects:
[11:55:59.931] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[11:55:59.931] <TB2> INFO: TBM Core alpha (0): 7 registers set
[11:55:59.931] <TB2> INFO: TBM Core beta (1): 7 registers set
[11:55:59.931] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:55:59.931] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.931] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.931] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.931] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.931] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.931] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.931] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.931] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.931] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.931] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.931] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.931] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.931] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.931] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.931] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:55:59.932] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:56:00.332] <TB2> INFO: enter 'restricted' command line mode
[11:56:00.332] <TB2> INFO: enter test to run
[11:56:00.332] <TB2> INFO: test: PixelAlive no parameter change
[11:56:00.332] <TB2> INFO: running: pixelalive
[11:56:00.337] <TB2> INFO: ######################################################################
[11:56:00.337] <TB2> INFO: PixTestAlive::doTest()
[11:56:00.337] <TB2> INFO: ######################################################################
[11:56:00.338] <TB2> INFO: ----------------------------------------------------------------------
[11:56:00.338] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:56:00.338] <TB2> INFO: ----------------------------------------------------------------------
[11:56:00.659] <TB2> INFO: Expecting 208000 events.
[11:56:11.003] <TB2> INFO: 208000 events read in total (9625ms).
[11:56:11.010] <TB2> INFO: Test took 10670ms.
[11:56:11.021] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:56:11.293] <TB2> INFO: PixTestAlive::aliveTest() done
[11:56:11.293] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
[11:56:11.295] <TB2> INFO: ----------------------------------------------------------------------
[11:56:11.295] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:56:11.295] <TB2> INFO: ----------------------------------------------------------------------
[11:56:11.601] <TB2> INFO: Expecting 208000 events.
[11:56:18.312] <TB2> INFO: 208000 events read in total (5995ms).
[11:56:18.313] <TB2> INFO: Test took 7016ms.
[11:56:18.313] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:56:18.313] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:56:18.635] <TB2> INFO: PixTestAlive::maskTest() done
[11:56:18.635] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:56:18.637] <TB2> INFO: ----------------------------------------------------------------------
[11:56:18.637] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:56:18.637] <TB2> INFO: ----------------------------------------------------------------------
[11:56:18.946] <TB2> INFO: Expecting 208000 events.
[11:56:29.185] <TB2> INFO: 208000 events read in total (9522ms).
[11:56:29.186] <TB2> INFO: Test took 10547ms.
[11:56:29.196] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:56:29.442] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[11:56:29.442] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:56:29.443] <TB2> INFO: PixTestAlive::doTest() done, duration: 29 seconds
[11:56:29.480] <TB2> INFO: enter test to run
[11:56:29.480] <TB2> INFO: test: delay setting parameters: ->2<-
[11:56:29.480] <TB2> INFO: delay test by 2 seconds...
[11:56:31.480] <TB2> INFO: enter test to run
[11:56:31.480] <TB2> INFO: test: HighRate no parameter change
[11:56:31.480] <TB2> INFO: running: highrate
[11:56:31.480] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//012_HREfficiency_75//phCalibrationFitErr35_C15.dat
[11:56:31.646] <TB2> INFO: ----------------------------------------------------------------------
[11:56:31.646] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:56:31.646] <TB2> INFO: ----------------------------------------------------------------------
[11:56:32.272] <TB2> INFO: Expecting 208000 events.
[11:56:47.082] <TB2> INFO: 208000 events read in total (14282ms).
[11:56:47.089] <TB2> INFO: Test took 15438ms.
[11:56:47.500] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:56:47.827] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
[11:56:47.827] <TB2> INFO: number of red-efficiency pixels: 217 223 259 477 492 744 607 701 560 719 760 539 476 257 280 227
[11:56:47.827] <TB2> INFO: number of X-ray hits detected: 154919 161244 135194 243310 256410 312211 281219 303214 276130 302147 317171 272314 233543 142029 169515 152660
[11:56:47.827] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:56:47.827] <TB2> INFO: number of Vcal hits detected: 207772 207773 207716 207486 207460 207124 207320 207199 207387 207150 207022 207400 207488 207666 207708 207768
[11:56:47.827] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.8 99.8 99.6 99.7 99.7 99.7 99.6 99.6 99.8 99.8 99.9 99.9 99.9
[11:56:47.827] <TB2> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.8 99.7 99.6 99.7 99.6 99.7 99.6 99.5 99.7 99.8 99.8 99.9 99.9
[11:56:47.827] <TB2> INFO: X-ray hit rate [MHz/cm2]: 45.4 47.3 39.6 71.3 75.2 91.5 82.4 88.9 80.9 88.6 93.0 79.8 68.5 41.6 49.7 44.7
[11:56:47.827] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[11:56:47.872] <TB2> INFO: PixTest:: pg_setup set to default.
[11:56:47.884] <TB2> INFO: enter test to run
[11:56:47.884] <TB2> INFO: test: no parameter change
[11:56:48.138] <TB2> QUIET: Connection to board 162 closed.
[11:56:48.218] <TB2> INFO: pXar: this is the end, my friend

[11:57:23.832] <TB2> INFO: *** Welcome to pxar ***
[11:57:23.832] <TB2> INFO: *** Today: 2016/02/08
[11:57:23.900] <TB2> INFO: *** Version: 9751
[11:57:23.900] <TB2> INFO: readRocDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//dacParameters35_C15.dat
[11:57:23.900] <TB2> INFO: readTbmDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//tbmParameters_C0b.dat
[11:57:23.900] <TB2> INFO: readMaskFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//defaultMaskFile.dat
[11:57:23.900] <TB2> INFO: readTrimFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//trimParameters35_C15.dat
[11:57:23.993] <TB2> INFO: clk: 4
[11:57:23.993] <TB2> INFO: ctr: 4
[11:57:23.993] <TB2> INFO: sda: 19
[11:57:23.993] <TB2> INFO: tin: 9
[11:57:23.993] <TB2> INFO: level: 15
[11:57:23.993] <TB2> INFO: triggerdelay: 0
[11:57:23.993] <TB2> QUIET: Instanciating API for pxar prod-12
[11:57:23.993] <TB2> INFO: Log level: INFO
[11:57:24.005] <TB2> INFO: Found DTB DTB_WXENWR
[11:57:24.017] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[11:57:24.020] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[11:57:24.023] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[11:57:25.567] <TB2> INFO: DUT info:
[11:57:25.567] <TB2> INFO: The DUT currently contains the following objects:
[11:57:25.567] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[11:57:25.567] <TB2> INFO: TBM Core alpha (0): 7 registers set
[11:57:25.567] <TB2> INFO: TBM Core beta (1): 7 registers set
[11:57:25.567] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:57:25.567] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.567] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:57:25.968] <TB2> INFO: enter 'restricted' command line mode
[11:57:25.968] <TB2> INFO: enter test to run
[11:57:25.968] <TB2> INFO: test: PixelAlive no parameter change
[11:57:25.968] <TB2> INFO: running: pixelalive
[11:57:25.972] <TB2> INFO: ######################################################################
[11:57:25.972] <TB2> INFO: PixTestAlive::doTest()
[11:57:25.972] <TB2> INFO: ######################################################################
[11:57:25.974] <TB2> INFO: ----------------------------------------------------------------------
[11:57:25.974] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:57:25.974] <TB2> INFO: ----------------------------------------------------------------------
[11:57:26.281] <TB2> INFO: Expecting 208000 events.
[11:57:36.687] <TB2> INFO: 208000 events read in total (9687ms).
[11:57:36.710] <TB2> INFO: Test took 10733ms.
[11:57:36.720] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:57:36.989] <TB2> INFO: PixTestAlive::aliveTest() done
[11:57:36.989] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
[11:57:36.991] <TB2> INFO: ----------------------------------------------------------------------
[11:57:36.991] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:57:36.991] <TB2> INFO: ----------------------------------------------------------------------
[11:57:37.299] <TB2> INFO: Expecting 208000 events.
[11:57:44.200] <TB2> INFO: 208000 events read in total (6185ms).
[11:57:44.200] <TB2> INFO: Test took 7207ms.
[11:57:44.200] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:57:44.200] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:57:44.526] <TB2> INFO: PixTestAlive::maskTest() done
[11:57:44.527] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:57:44.529] <TB2> INFO: ----------------------------------------------------------------------
[11:57:44.529] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:57:44.529] <TB2> INFO: ----------------------------------------------------------------------
[11:57:44.835] <TB2> INFO: Expecting 208000 events.
[11:57:54.921] <TB2> INFO: 208000 events read in total (9370ms).
[11:57:54.921] <TB2> INFO: Test took 10390ms.
[11:57:54.928] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:57:55.169] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[11:57:55.169] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:57:55.169] <TB2> INFO: PixTestAlive::doTest() done, duration: 29 seconds
[11:57:55.198] <TB2> INFO: enter test to run
[11:57:55.198] <TB2> INFO: test: delay setting parameters: ->2<-
[11:57:55.198] <TB2> INFO: delay test by 2 seconds...
[11:57:57.198] <TB2> INFO: enter test to run
[11:57:57.198] <TB2> INFO: test: HighRate no parameter change
[11:57:57.198] <TB2> INFO: running: highrate
[11:57:57.198] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//013_HREfficiency_100//phCalibrationFitErr35_C15.dat
[11:57:57.341] <TB2> INFO: ----------------------------------------------------------------------
[11:57:57.341] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:57:57.341] <TB2> INFO: ----------------------------------------------------------------------
[11:57:57.956] <TB2> INFO: Expecting 208000 events.
[11:58:15.628] <TB2> INFO: 208000 events read in total (17144ms).
[11:58:15.638] <TB2> INFO: Test took 18292ms.
[11:58:16.176] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:58:16.545] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
[11:58:16.545] <TB2> INFO: number of red-efficiency pixels: 331 382 455 847 918 1414 1137 1399 1087 1332 1439 1058 823 452 580 367
[11:58:16.545] <TB2> INFO: number of X-ray hits detected: 212292 223392 187865 334082 350610 422655 384061 414305 380250 413970 433763 372415 320760 197354 234460 210292
[11:58:16.545] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:58:16.545] <TB2> INFO: number of Vcal hits detected: 207645 207600 207395 206993 206857 205972 206447 206156 206674 206127 205932 206601 207033 207392 207364 207609
[11:58:16.545] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.8 99.8 99.8 99.6 99.5 99.2 99.4 99.2 99.4 99.2 99.1 99.4 99.6 99.8 99.7 99.8
[11:58:16.545] <TB2> INFO: Vcal hit overall efficiency (%): 99.8 99.8 99.7 99.5 99.5 99.0 99.3 99.1 99.4 99.1 99.0 99.3 99.5 99.7 99.7 99.8
[11:58:16.545] <TB2> INFO: X-ray hit rate [MHz/cm2]: 62.2 65.5 55.1 97.9 102.8 123.9 112.6 121.4 111.5 121.3 127.1 109.2 94.0 57.8 68.7 61.6
[11:58:16.545] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[11:58:16.590] <TB2> INFO: PixTest:: pg_setup set to default.
[11:58:16.600] <TB2> INFO: enter test to run
[11:58:16.600] <TB2> INFO: test: no parameter change
[11:58:16.857] <TB2> QUIET: Connection to board 162 closed.
[11:58:16.937] <TB2> INFO: pXar: this is the end, my friend

[11:58:51.302] <TB2> INFO: *** Welcome to pxar ***
[11:58:51.302] <TB2> INFO: *** Today: 2016/02/08
[11:58:51.368] <TB2> INFO: *** Version: 9751
[11:58:51.368] <TB2> INFO: readRocDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//dacParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//dacParameters35_C15.dat
[11:58:51.369] <TB2> INFO: readTbmDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//tbmParameters_C0a.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//tbmParameters_C0b.dat
[11:58:51.369] <TB2> INFO: readMaskFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//defaultMaskFile.dat
[11:58:51.369] <TB2> INFO: readTrimFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//trimParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//trimParameters35_C15.dat
[11:58:51.454] <TB2> INFO: clk: 4
[11:58:51.454] <TB2> INFO: ctr: 4
[11:58:51.454] <TB2> INFO: sda: 19
[11:58:51.454] <TB2> INFO: tin: 9
[11:58:51.454] <TB2> INFO: level: 15
[11:58:51.454] <TB2> INFO: triggerdelay: 0
[11:58:51.454] <TB2> QUIET: Instanciating API for pxar prod-12
[11:58:51.454] <TB2> INFO: Log level: INFO
[11:58:51.466] <TB2> INFO: Found DTB DTB_WXENWR
[11:58:51.478] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[11:58:51.481] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[11:58:51.484] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[11:58:53.037] <TB2> INFO: DUT info:
[11:58:53.037] <TB2> INFO: The DUT currently contains the following objects:
[11:58:53.037] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[11:58:53.037] <TB2> INFO: TBM Core alpha (0): 7 registers set
[11:58:53.037] <TB2> INFO: TBM Core beta (1): 7 registers set
[11:58:53.037] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[11:58:53.037] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.037] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.037] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.037] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.038] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.038] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.038] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.038] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.038] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.038] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.038] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.038] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.038] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.038] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.038] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.038] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[11:58:53.439] <TB2> INFO: enter 'restricted' command line mode
[11:58:53.439] <TB2> INFO: enter test to run
[11:58:53.439] <TB2> INFO: test: PixelAlive no parameter change
[11:58:53.439] <TB2> INFO: running: pixelalive
[11:58:53.444] <TB2> INFO: ######################################################################
[11:58:53.444] <TB2> INFO: PixTestAlive::doTest()
[11:58:53.444] <TB2> INFO: ######################################################################
[11:58:53.445] <TB2> INFO: ----------------------------------------------------------------------
[11:58:53.445] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:58:53.446] <TB2> INFO: ----------------------------------------------------------------------
[11:58:53.782] <TB2> INFO: Expecting 208000 events.
[11:59:03.943] <TB2> INFO: 208000 events read in total (9442ms).
[11:59:03.951] <TB2> INFO: Test took 10503ms.
[11:59:03.959] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:59:04.230] <TB2> INFO: PixTestAlive::aliveTest() done
[11:59:04.230] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
[11:59:04.232] <TB2> INFO: ----------------------------------------------------------------------
[11:59:04.232] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:59:04.232] <TB2> INFO: ----------------------------------------------------------------------
[11:59:04.564] <TB2> INFO: Expecting 208000 events.
[11:59:11.263] <TB2> INFO: 208000 events read in total (5982ms).
[11:59:11.264] <TB2> INFO: Test took 7030ms.
[11:59:11.264] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:59:11.264] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[11:59:11.588] <TB2> INFO: PixTestAlive::maskTest() done
[11:59:11.588] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:59:11.590] <TB2> INFO: ----------------------------------------------------------------------
[11:59:11.590] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[11:59:11.590] <TB2> INFO: ----------------------------------------------------------------------
[11:59:11.899] <TB2> INFO: Expecting 208000 events.
[11:59:22.079] <TB2> INFO: 208000 events read in total (9464ms).
[11:59:22.079] <TB2> INFO: Test took 10487ms.
[11:59:22.086] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:59:22.335] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[11:59:22.335] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[11:59:22.335] <TB2> INFO: PixTestAlive::doTest() done, duration: 28 seconds
[11:59:22.366] <TB2> INFO: enter test to run
[11:59:22.366] <TB2> INFO: test: delay setting parameters: ->2<-
[11:59:22.366] <TB2> INFO: delay test by 2 seconds...
[11:59:24.366] <TB2> INFO: enter test to run
[11:59:24.366] <TB2> INFO: test: HighRate no parameter change
[11:59:24.367] <TB2> INFO: running: highrate
[11:59:24.367] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//014_HREfficiency_125//phCalibrationFitErr35_C15.dat
[11:59:24.548] <TB2> INFO: ----------------------------------------------------------------------
[11:59:24.548] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[11:59:24.548] <TB2> INFO: ----------------------------------------------------------------------
[11:59:25.149] <TB2> INFO: Expecting 208000 events.
[11:59:44.070] <TB2> INFO: 208000 events read in total (18393ms).
[11:59:44.082] <TB2> INFO: Test took 19529ms.
[11:59:44.758] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[11:59:45.174] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
[11:59:45.174] <TB2> INFO: number of red-efficiency pixels: 497 545 626 1216 1296 1981 1648 2005 1591 1954 1979 1589 1141 650 888 502
[11:59:45.174] <TB2> INFO: number of X-ray hits detected: 258636 272770 228891 404052 425512 512142 467989 504874 461602 500344 524559 452515 389900 241236 286636 255468
[11:59:45.174] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[11:59:45.174] <TB2> INFO: number of Vcal hits detected: 207455 207406 207041 206344 206154 204762 205471 204912 205762 204680 204514 205552 206509 207004 206982 207429
[11:59:45.174] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.8 99.7 99.6 99.3 99.2 98.7 99.0 98.7 99.0 98.6 98.6 99.0 99.4 99.6 99.5 99.8
[11:59:45.174] <TB2> INFO: Vcal hit overall efficiency (%): 99.7 99.7 99.5 99.2 99.1 98.4 98.8 98.5 98.9 98.4 98.3 98.8 99.3 99.5 99.5 99.7
[11:59:45.174] <TB2> INFO: X-ray hit rate [MHz/cm2]: 75.8 80.0 67.1 118.4 124.7 150.1 137.2 148.0 135.3 146.7 153.8 132.6 114.3 70.7 84.0 74.9
[11:59:45.174] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[11:59:45.220] <TB2> INFO: PixTest:: pg_setup set to default.
[11:59:45.231] <TB2> INFO: enter test to run
[11:59:45.231] <TB2> INFO: test: no parameter change
[11:59:45.442] <TB2> QUIET: Connection to board 162 closed.
[11:59:45.522] <TB2> INFO: pXar: this is the end, my friend

[12:00:23.932] <TB2> INFO: *** Welcome to pxar ***
[12:00:23.932] <TB2> INFO: *** Today: 2016/02/08
[12:00:23.998] <TB2> INFO: *** Version: 9751
[12:00:23.998] <TB2> INFO: readRocDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//dacParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//dacParameters35_C15.dat
[12:00:23.999] <TB2> INFO: readTbmDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//tbmParameters_C0a.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//tbmParameters_C0b.dat
[12:00:23.999] <TB2> INFO: readMaskFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//defaultMaskFile.dat
[12:00:23.999] <TB2> INFO: readTrimFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//trimParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//trimParameters35_C15.dat
[12:00:24.072] <TB2> INFO: clk: 4
[12:00:24.072] <TB2> INFO: ctr: 4
[12:00:24.072] <TB2> INFO: sda: 19
[12:00:24.072] <TB2> INFO: tin: 9
[12:00:24.072] <TB2> INFO: level: 15
[12:00:24.072] <TB2> INFO: triggerdelay: 0
[12:00:24.072] <TB2> QUIET: Instanciating API for pxar prod-12
[12:00:24.072] <TB2> INFO: Log level: INFO
[12:00:24.086] <TB2> INFO: Found DTB DTB_WXENWR
[12:00:24.097] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[12:00:24.100] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[12:00:24.103] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[12:00:25.653] <TB2> INFO: DUT info:
[12:00:25.653] <TB2> INFO: The DUT currently contains the following objects:
[12:00:25.653] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[12:00:25.653] <TB2> INFO: TBM Core alpha (0): 7 registers set
[12:00:25.653] <TB2> INFO: TBM Core beta (1): 7 registers set
[12:00:25.653] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:00:25.653] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:25.653] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:00:26.054] <TB2> INFO: enter 'restricted' command line mode
[12:00:26.054] <TB2> INFO: enter test to run
[12:00:26.055] <TB2> INFO: test: PixelAlive no parameter change
[12:00:26.055] <TB2> INFO: running: pixelalive
[12:00:26.059] <TB2> INFO: ######################################################################
[12:00:26.059] <TB2> INFO: PixTestAlive::doTest()
[12:00:26.059] <TB2> INFO: ######################################################################
[12:00:26.061] <TB2> INFO: ----------------------------------------------------------------------
[12:00:26.061] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:00:26.061] <TB2> INFO: ----------------------------------------------------------------------
[12:00:26.410] <TB2> INFO: Expecting 208000 events.
[12:00:36.857] <TB2> INFO: 208000 events read in total (9728ms).
[12:00:36.868] <TB2> INFO: Test took 10805ms.
[12:00:36.875] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:00:37.146] <TB2> INFO: PixTestAlive::aliveTest() done
[12:00:37.146] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
[12:00:37.148] <TB2> INFO: ----------------------------------------------------------------------
[12:00:37.148] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:00:37.148] <TB2> INFO: ----------------------------------------------------------------------
[12:00:37.486] <TB2> INFO: Expecting 208000 events.
[12:00:44.352] <TB2> INFO: 208000 events read in total (6150ms).
[12:00:44.352] <TB2> INFO: Test took 7202ms.
[12:00:44.352] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:00:44.353] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[12:00:44.678] <TB2> INFO: PixTestAlive::maskTest() done
[12:00:44.678] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:00:44.680] <TB2> INFO: ----------------------------------------------------------------------
[12:00:44.680] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:00:44.680] <TB2> INFO: ----------------------------------------------------------------------
[12:00:44.986] <TB2> INFO: Expecting 208000 events.
[12:00:55.157] <TB2> INFO: 208000 events read in total (9455ms).
[12:00:55.158] <TB2> INFO: Test took 10475ms.
[12:00:55.166] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:00:55.412] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[12:00:55.412] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:00:55.412] <TB2> INFO: PixTestAlive::doTest() done, duration: 29 seconds
[12:00:55.442] <TB2> INFO: enter test to run
[12:00:55.442] <TB2> INFO: test: delay setting parameters: ->2<-
[12:00:55.442] <TB2> INFO: delay test by 2 seconds...
[12:00:57.442] <TB2> INFO: enter test to run
[12:00:57.442] <TB2> INFO: test: HighRate no parameter change
[12:00:57.442] <TB2> INFO: running: highrate
[12:00:57.442] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//015_HREfficiency_150//phCalibrationFitErr35_C15.dat
[12:00:57.616] <TB2> INFO: ----------------------------------------------------------------------
[12:00:57.616] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[12:00:57.616] <TB2> INFO: ----------------------------------------------------------------------
[12:00:58.229] <TB2> INFO: Expecting 208000 events.
[12:01:19.639] <TB2> INFO: 208000 events read in total (20882ms).
[12:01:19.653] <TB2> INFO: Test took 22033ms.
[12:01:20.426] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:01:20.876] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
[12:01:20.876] <TB2> INFO: number of red-efficiency pixels: 769 760 813 1711 1798 2606 2225 2709 2303 2643 2642 2189 1652 910 1195 747
[12:01:20.876] <TB2> INFO: number of X-ray hits detected: 308155 325709 274551 479149 505162 607827 554751 598583 548691 593052 618478 536306 462252 286740 340692 305060
[12:01:20.876] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[12:01:20.876] <TB2> INFO: number of Vcal hits detected: 207130 207126 206571 205280 205040 202514 203696 202811 204152 202379 202303 203966 205447 206467 206532 207133
[12:01:20.876] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.6 99.6 99.4 98.9 98.8 97.7 98.3 97.8 98.3 97.7 97.6 98.3 99.0 99.4 99.3 99.6
[12:01:20.876] <TB2> INFO: Vcal hit overall efficiency (%): 99.6 99.6 99.3 98.7 98.6 97.4 97.9 97.5 98.2 97.3 97.3 98.1 98.8 99.3 99.3 99.6
[12:01:20.876] <TB2> INFO: X-ray hit rate [MHz/cm2]: 90.3 95.5 80.5 140.4 148.1 178.2 162.6 175.4 160.8 173.8 181.3 157.2 135.5 84.0 99.9 89.4
[12:01:20.876] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[12:01:20.921] <TB2> INFO: PixTest:: pg_setup set to default.
[12:01:20.938] <TB2> INFO: enter test to run
[12:01:20.938] <TB2> INFO: test: no parameter change
[12:01:21.172] <TB2> QUIET: Connection to board 162 closed.
[12:01:21.252] <TB2> INFO: pXar: this is the end, my friend

[12:01:57.352] <TB2> INFO: *** Welcome to pxar ***
[12:01:57.352] <TB2> INFO: *** Today: 2016/02/08
[12:01:57.418] <TB2> INFO: *** Version: 9751
[12:01:57.418] <TB2> INFO: readRocDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//dacParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//dacParameters35_C15.dat
[12:01:57.418] <TB2> INFO: readTbmDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//tbmParameters_C0a.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//tbmParameters_C0b.dat
[12:01:57.419] <TB2> INFO: readMaskFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//defaultMaskFile.dat
[12:01:57.419] <TB2> INFO: readTrimFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//trimParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//trimParameters35_C15.dat
[12:01:57.499] <TB2> INFO: clk: 4
[12:01:57.499] <TB2> INFO: ctr: 4
[12:01:57.499] <TB2> INFO: sda: 19
[12:01:57.499] <TB2> INFO: tin: 9
[12:01:57.499] <TB2> INFO: level: 15
[12:01:57.499] <TB2> INFO: triggerdelay: 0
[12:01:57.499] <TB2> QUIET: Instanciating API for pxar prod-12
[12:01:57.499] <TB2> INFO: Log level: INFO
[12:01:57.513] <TB2> INFO: Found DTB DTB_WXENWR
[12:01:57.524] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[12:01:57.527] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[12:01:57.530] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[12:01:59.088] <TB2> INFO: DUT info:
[12:01:59.089] <TB2> INFO: The DUT currently contains the following objects:
[12:01:59.089] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[12:01:59.089] <TB2> INFO: TBM Core alpha (0): 7 registers set
[12:01:59.089] <TB2> INFO: TBM Core beta (1): 7 registers set
[12:01:59.089] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:01:59.089] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.089] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:01:59.490] <TB2> INFO: enter 'restricted' command line mode
[12:01:59.490] <TB2> INFO: enter test to run
[12:01:59.490] <TB2> INFO: test: PixelAlive no parameter change
[12:01:59.490] <TB2> INFO: running: pixelalive
[12:01:59.495] <TB2> INFO: ######################################################################
[12:01:59.495] <TB2> INFO: PixTestAlive::doTest()
[12:01:59.495] <TB2> INFO: ######################################################################
[12:01:59.497] <TB2> INFO: ----------------------------------------------------------------------
[12:01:59.497] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:01:59.497] <TB2> INFO: ----------------------------------------------------------------------
[12:01:59.803] <TB2> INFO: Expecting 208000 events.
[12:02:10.322] <TB2> INFO: 208000 events read in total (9799ms).
[12:02:10.341] <TB2> INFO: Test took 10842ms.
[12:02:10.348] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:02:10.614] <TB2> INFO: PixTestAlive::aliveTest() done
[12:02:10.614] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
[12:02:10.616] <TB2> INFO: ----------------------------------------------------------------------
[12:02:10.616] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:02:10.616] <TB2> INFO: ----------------------------------------------------------------------
[12:02:10.922] <TB2> INFO: Expecting 208000 events.
[12:02:17.695] <TB2> INFO: 208000 events read in total (6056ms).
[12:02:17.695] <TB2> INFO: Test took 7077ms.
[12:02:17.695] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:02:17.695] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[12:02:18.021] <TB2> INFO: PixTestAlive::maskTest() done
[12:02:18.021] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:02:18.023] <TB2> INFO: ----------------------------------------------------------------------
[12:02:18.023] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:02:18.023] <TB2> INFO: ----------------------------------------------------------------------
[12:02:18.334] <TB2> INFO: Expecting 208000 events.
[12:02:28.508] <TB2> INFO: 208000 events read in total (9458ms).
[12:02:28.508] <TB2> INFO: Test took 10483ms.
[12:02:28.515] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:02:28.761] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[12:02:28.761] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:02:28.761] <TB2> INFO: PixTestAlive::doTest() done, duration: 29 seconds
[12:02:28.793] <TB2> INFO: enter test to run
[12:02:28.793] <TB2> INFO: test: delay setting parameters: ->2<-
[12:02:28.793] <TB2> INFO: delay test by 2 seconds...
[12:02:30.793] <TB2> INFO: enter test to run
[12:02:30.793] <TB2> INFO: test: HighRate no parameter change
[12:02:30.793] <TB2> INFO: running: highrate
[12:02:30.793] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//016_HREfficiency_200//phCalibrationFitErr35_C15.dat
[12:02:30.949] <TB2> INFO: ----------------------------------------------------------------------
[12:02:30.949] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[12:02:30.949] <TB2> INFO: ----------------------------------------------------------------------
[12:02:31.569] <TB2> INFO: Expecting 208000 events.
[12:02:57.988] <TB2> INFO: 208000 events read in total (25891ms).
[12:02:58.004] <TB2> INFO: Test took 27051ms.
[12:02:59.085] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:02:59.629] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
[12:02:59.629] <TB2> INFO: number of red-efficiency pixels: 1388 1393 1348 2798 2988 3704 3350 3788 3517 3684 3721 3299 2797 1389 2205 1381
[12:02:59.629] <TB2> INFO: number of X-ray hits detected: 417916 443340 373922 647105 681377 818474 753107 803339 740129 799467 829761 723511 625309 391457 463789 413261
[12:02:59.629] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[12:02:59.630] <TB2> INFO: number of Vcal hits detected: 206109 206117 204656 201523 200646 194847 197479 195748 198363 194895 194045 198340 201861 204649 204579 206087
[12:02:59.630] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.2 99.2 98.7 97.3 96.9 94.5 95.7 94.7 95.8 94.5 94.1 96.0 97.5 98.7 98.5 99.2
[12:02:59.630] <TB2> INFO: Vcal hit overall efficiency (%): 99.1 99.1 98.4 96.9 96.5 93.7 94.9 94.1 95.4 93.7 93.3 95.4 97.0 98.4 98.4 99.1
[12:02:59.630] <TB2> INFO: X-ray hit rate [MHz/cm2]: 122.5 129.9 109.6 189.7 199.7 239.9 220.7 235.5 216.9 234.3 243.2 212.1 183.3 114.7 135.9 121.1
[12:02:59.630] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[12:02:59.676] <TB2> INFO: PixTest:: pg_setup set to default.
[12:02:59.688] <TB2> INFO: enter test to run
[12:02:59.688] <TB2> INFO: test: no parameter change
[12:03:00.016] <TB2> QUIET: Connection to board 162 closed.
[12:03:00.103] <TB2> INFO: pXar: this is the end, my friend

[12:03:33.981] <TB2> INFO: *** Welcome to pxar ***
[12:03:33.981] <TB2> INFO: *** Today: 2016/02/08
[12:03:34.044] <TB2> INFO: *** Version: 9751
[12:03:34.044] <TB2> INFO: readRocDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//dacParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//dacParameters35_C15.dat
[12:03:34.045] <TB2> INFO: readTbmDacs: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//tbmParameters_C0a.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//tbmParameters_C0b.dat
[12:03:34.045] <TB2> INFO: readMaskFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//defaultMaskFile.dat
[12:03:34.045] <TB2> INFO: readTrimFile: /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//trimParameters35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//trimParameters35_C15.dat
[12:03:34.118] <TB2> INFO: clk: 4
[12:03:34.118] <TB2> INFO: ctr: 4
[12:03:34.118] <TB2> INFO: sda: 19
[12:03:34.118] <TB2> INFO: tin: 9
[12:03:34.118] <TB2> INFO: level: 15
[12:03:34.118] <TB2> INFO: triggerdelay: 0
[12:03:34.118] <TB2> QUIET: Instanciating API for pxar prod-12
[12:03:34.118] <TB2> INFO: Log level: INFO
[12:03:34.132] <TB2> INFO: Found DTB DTB_WXENWR
[12:03:34.143] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[12:03:34.146] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[12:03:34.149] <TB2> INFO: RPC call hashes of host and DTB match: 398089610
[12:03:35.693] <TB2> INFO: DUT info:
[12:03:35.693] <TB2> INFO: The DUT currently contains the following objects:
[12:03:35.693] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[12:03:35.693] <TB2> INFO: TBM Core alpha (0): 7 registers set
[12:03:35.693] <TB2> INFO: TBM Core beta (1): 7 registers set
[12:03:35.693] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:03:35.693] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:35.693] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:03:36.095] <TB2> INFO: enter 'restricted' command line mode
[12:03:36.095] <TB2> INFO: enter test to run
[12:03:36.095] <TB2> INFO: test: PixelAlive no parameter change
[12:03:36.095] <TB2> INFO: running: pixelalive
[12:03:36.100] <TB2> INFO: ######################################################################
[12:03:36.100] <TB2> INFO: PixTestAlive::doTest()
[12:03:36.100] <TB2> INFO: ######################################################################
[12:03:36.102] <TB2> INFO: ----------------------------------------------------------------------
[12:03:36.102] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:03:36.102] <TB2> INFO: ----------------------------------------------------------------------
[12:03:36.421] <TB2> INFO: Expecting 208000 events.
[12:03:46.688] <TB2> INFO: 208000 events read in total (9548ms).
[12:03:46.707] <TB2> INFO: Test took 10603ms.
[12:03:46.713] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:03:46.981] <TB2> INFO: PixTestAlive::aliveTest() done
[12:03:46.981] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
[12:03:46.983] <TB2> INFO: ----------------------------------------------------------------------
[12:03:46.983] <TB2> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:03:46.983] <TB2> INFO: ----------------------------------------------------------------------
[12:03:47.309] <TB2> INFO: Expecting 208000 events.
[12:03:54.146] <TB2> INFO: 208000 events read in total (6121ms).
[12:03:54.147] <TB2> INFO: Test took 7162ms.
[12:03:54.147] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:03:54.148] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[12:03:54.471] <TB2> INFO: PixTestAlive::maskTest() done
[12:03:54.471] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:03:54.473] <TB2> INFO: ----------------------------------------------------------------------
[12:03:54.473] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:03:54.473] <TB2> INFO: ----------------------------------------------------------------------
[12:03:54.783] <TB2> INFO: Expecting 208000 events.
[12:04:04.914] <TB2> INFO: 208000 events read in total (9414ms).
[12:04:04.915] <TB2> INFO: Test took 10440ms.
[12:04:04.921] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:04:05.172] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[12:04:05.172] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:04:05.172] <TB2> INFO: PixTestAlive::doTest() done, duration: 29 seconds
[12:04:05.203] <TB2> INFO: enter test to run
[12:04:05.203] <TB2> INFO: test: delay setting parameters: ->2<-
[12:04:05.203] <TB2> INFO: delay test by 2 seconds...
[12:04:07.203] <TB2> INFO: enter test to run
[12:04:07.203] <TB2> INFO: test: HighRate no parameter change
[12:04:07.203] <TB2> INFO: running: highrate
[12:04:07.203] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2148_XrayQualification_2016-02-08_11h28m_1454927331//017_HREfficiency_250//phCalibrationFitErr35_C15.dat
[12:04:07.348] <TB2> INFO: ----------------------------------------------------------------------
[12:04:07.348] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[12:04:07.348] <TB2> INFO: ----------------------------------------------------------------------
[12:04:07.968] <TB2> INFO: Expecting 208000 events.
[12:04:38.797] <TB2> INFO: 197150 events read in total (30301ms).
[12:04:40.809] <TB2> INFO: 208000 events read in total (32313ms).
[12:04:40.829] <TB2> INFO: Test took 33477ms.
[12:04:42.152] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:04:42.766] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
[12:04:42.766] <TB2> INFO: number of red-efficiency pixels: 2108 2178 1757 3569 3686 4058 3911 4102 3979 4047 4086 3884 3608 1822 3052 2138
[12:04:42.766] <TB2> INFO: number of X-ray hits detected: 517105 548431 459602 796070 839335 1002567 921257 985851 910354 978741 1016283 892893 773733 485586 571885 513020
[12:04:42.766] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[12:04:42.766] <TB2> INFO: number of Vcal hits detected: 204448 204498 202167 195913 194302 184052 188725 185450 190205 184492 182717 190288 196470 201943 201569 204358
[12:04:42.766] <TB2> INFO: Vcal hit fiducial efficiency (%): 98.5 98.4 97.8 94.9 94.2 89.7 91.9 90.1 92.1 89.9 89.0 92.5 95.2 97.7 97.1 98.5
[12:04:42.766] <TB2> INFO: Vcal hit overall efficiency (%): 98.3 98.3 97.2 94.2 93.4 88.5 90.7 89.2 91.4 88.7 87.8 91.5 94.5 97.1 96.9 98.2
[12:04:42.766] <TB2> INFO: X-ray hit rate [MHz/cm2]: 151.6 160.7 134.7 233.3 246.0 293.9 270.0 289.0 266.8 286.9 297.9 261.7 226.8 142.3 167.6 150.4
[12:04:42.766] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[12:04:42.812] <TB2> INFO: PixTest:: pg_setup set to default.
[12:04:42.824] <TB2> INFO: enter test to run
[12:04:42.824] <TB2> INFO: test: no parameter change
[12:04:43.097] <TB2> QUIET: Connection to board 162 closed.
[12:04:43.180] <TB2> INFO: pXar: this is the end, my friend