[13:12:16.900] <TB3> INFO: *** Welcome to pxar ***
[13:12:16.900] <TB3> INFO: *** Today: 2016/01/18
[13:12:16.958] <TB3> INFO: *** Version: b2d3
[13:12:16.959] <TB3> INFO: readRocDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//000_PixelAlive_p17//dacParameters35_C15.dat
[13:12:16.959] <TB3> INFO: readTbmDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//000_PixelAlive_p17//tbmParameters_C0b.dat
[13:12:16.959] <TB3> INFO: readMaskFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//000_PixelAlive_p17//defaultMaskFile.dat
[13:12:16.959] <TB3> INFO: readTrimFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//000_PixelAlive_p17//trimParameters35_C15.dat
[13:12:17.029] <TB3> INFO: clk: 4
[13:12:17.029] <TB3> INFO: ctr: 4
[13:12:17.029] <TB3> INFO: sda: 19
[13:12:17.029] <TB3> INFO: tin: 9
[13:12:17.029] <TB3> INFO: level: 15
[13:12:17.029] <TB3> INFO: triggerdelay: 0
[13:12:17.029] <TB3> QUIET: Instanciating API for pxar prod-12
[13:12:17.029] <TB3> INFO: Log level: INFO
[13:12:17.041] <TB3> INFO: Found DTB DTB_WWV6Z5
[13:12:17.052] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[13:12:17.055] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[13:12:17.057] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[13:12:18.603] <TB3> INFO: DUT info:
[13:12:18.603] <TB3> INFO: The DUT currently contains the following objects:
[13:12:18.603] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[13:12:18.603] <TB3> INFO: TBM Core alpha (0): 7 registers set
[13:12:18.603] <TB3> INFO: TBM Core beta (1): 7 registers set
[13:12:18.603] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:12:18.604] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:18.604] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:12:19.006] <TB3> INFO: enter 'restricted' command line mode
[13:12:19.006] <TB3> INFO: enter test to run
[13:12:19.006] <TB3> INFO: test: PixelAlive no parameter change
[13:12:19.006] <TB3> INFO: running: pixelalive
[13:12:19.012] <TB3> INFO: ######################################################################
[13:12:19.012] <TB3> INFO: PixTestAlive::doTest()
[13:12:19.012] <TB3> INFO: ######################################################################
[13:12:19.013] <TB3> INFO: ----------------------------------------------------------------------
[13:12:19.013] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:12:19.013] <TB3> INFO: ----------------------------------------------------------------------
[13:12:19.318] <TB3> INFO: Expecting 41600 events.
[13:12:23.753] <TB3> INFO: 41600 events read in total (3717ms).
[13:12:23.833] <TB3> INFO: Test took 4819ms.
[13:12:23.839] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:12:24.086] <TB3> INFO: PixTestAlive::aliveTest() done
[13:12:24.086] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0
[13:12:24.088] <TB3> INFO: ----------------------------------------------------------------------
[13:12:24.088] <TB3> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:12:24.088] <TB3> INFO: ----------------------------------------------------------------------
[13:12:24.390] <TB3> INFO: Expecting 41600 events.
[13:12:27.572] <TB3> INFO: 41600 events read in total (2466ms).
[13:12:27.572] <TB3> INFO: Test took 3483ms.
[13:12:27.572] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:12:27.572] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[13:12:27.882] <TB3> INFO: PixTestAlive::maskTest() done
[13:12:27.882] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:12:27.883] <TB3> INFO: ----------------------------------------------------------------------
[13:12:27.887] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[13:12:27.887] <TB3> INFO: ----------------------------------------------------------------------
[13:12:28.188] <TB3> INFO: Expecting 41600 events.
[13:12:32.577] <TB3> INFO: 41600 events read in total (3673ms).
[13:12:32.577] <TB3> INFO: Test took 4689ms.
[13:12:32.584] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:12:32.872] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[13:12:32.872] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[13:12:32.872] <TB3> INFO: PixTestAlive::doTest() done, duration: 13 seconds
[13:12:32.903] <TB3> INFO: enter test to run
[13:12:32.903] <TB3> INFO: test: no parameter change
[13:12:33.148] <TB3> QUIET: Connection to board 121 closed.
[13:12:33.227] <TB3> INFO: pXar: this is the end, my friend

[13:17:49.726] <TB3> INFO: *** Welcome to pxar ***
[13:17:49.726] <TB3> INFO: *** Today: 2016/01/18
[13:17:49.786] <TB3> INFO: *** Version: b2d3
[13:17:49.786] <TB3> INFO: readRocDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//dacParameters35_C15.dat
[13:17:49.787] <TB3> INFO: readTbmDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[13:17:49.787] <TB3> INFO: readMaskFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//defaultMaskFile.dat
[13:17:49.787] <TB3> INFO: readTrimFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C15.dat
[13:17:49.883] <TB3> INFO: clk: 4
[13:17:49.883] <TB3> INFO: ctr: 4
[13:17:49.883] <TB3> INFO: sda: 19
[13:17:49.883] <TB3> INFO: tin: 9
[13:17:49.883] <TB3> INFO: level: 15
[13:17:49.883] <TB3> INFO: triggerdelay: 0
[13:17:49.883] <TB3> QUIET: Instanciating API for pxar prod-12
[13:17:49.883] <TB3> INFO: Log level: INFO
[13:17:49.900] <TB3> INFO: Found DTB DTB_WWV6Z5
[13:17:49.912] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[13:17:49.915] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[13:17:49.917] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[13:17:51.481] <TB3> INFO: DUT info:
[13:17:51.481] <TB3> INFO: The DUT currently contains the following objects:
[13:17:51.481] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[13:17:51.481] <TB3> INFO: TBM Core alpha (0): 7 registers set
[13:17:51.481] <TB3> INFO: TBM Core beta (1): 7 registers set
[13:17:51.481] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:17:51.481] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.481] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:17:51.882] <TB3> INFO: enter 'restricted' command line mode
[13:17:51.882] <TB3> INFO: enter test to run
[13:17:51.882] <TB3> INFO: test: delay setting parameters: ->5<-
[13:17:51.882] <TB3> INFO: delay test by 5 seconds...
[13:17:56.882] <TB3> INFO: enter test to run
[13:17:56.882] <TB3> INFO: test: highrate no parameter change
[13:17:56.882] <TB3> INFO: running: highrate
[13:17:56.883] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[13:17:57.024] <TB3> INFO: ----------------------------------------------------------------------
[13:17:57.024] <TB3> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[13:17:57.024] <TB3> INFO: ----------------------------------------------------------------------
[13:17:57.024] <TB3> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[13:17:57.024] <TB3> INFO: edge/corner pixel THR is adjusted
[13:17:57.024] <TB3> INFO: PixTestHighRate::trimHotPixels: step 0...
[13:17:57.983] <TB3> INFO: Collecting data for 1 seconds...
[13:17:58.984] <TB3> INFO: Done with hot pixel readout
[13:18:05.095] <TB3> INFO: PixTest:: pg_setup set to default.
[13:18:05.096] <TB3> INFO: 1 hot pixels found in step 0
[13:18:06.060] <TB3> INFO: Collecting data for 1 seconds...
[13:18:07.062] <TB3> INFO: Done with hot pixel readout
[13:18:13.218] <TB3> INFO: PixTest:: pg_setup set to default.
[13:18:13.219] <TB3> INFO: 1 hot pixels found in step 1
[13:18:14.181] <TB3> INFO: Collecting data for 1 seconds...
[13:18:15.182] <TB3> INFO: Done with hot pixel readout
[13:18:22.003] <TB3> INFO: PixTest:: pg_setup set to default.
[13:18:22.003] <TB3> INFO: 0 hot pixels found in step 2
[13:18:22.011] <TB3> INFO: 0 hot pixels could not be trimmed and have been masked.
[13:18:22.039] <TB3> INFO: PixTest::trimHotPixels() done
[13:18:22.039] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C0.dat
[13:18:22.046] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C1.dat
[13:18:22.052] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C2.dat
[13:18:22.063] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C3.dat
[13:18:22.074] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C4.dat
[13:18:22.086] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C5.dat
[13:18:22.098] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C6.dat
[13:18:22.109] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C7.dat
[13:18:22.118] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C8.dat
[13:18:22.124] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C9.dat
[13:18:22.130] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C10.dat
[13:18:22.137] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C11.dat
[13:18:22.143] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C12.dat
[13:18:22.149] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C13.dat
[13:18:22.156] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C14.dat
[13:18:22.162] <TB3> INFO: write trim parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//trimParameters35_C15.dat
[13:18:22.169] <TB3> INFO: write masked pixels into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//002_RetrimHotPixels_150//defaultMaskFile.dat
[13:18:22.202] <TB3> INFO: enter test to run
[13:18:22.202] <TB3> INFO: test: no parameter change
[13:18:22.352] <TB3> QUIET: Connection to board 121 closed.
[13:18:22.432] <TB3> INFO: pXar: this is the end, my friend

[13:20:17.511] <TB3> INFO: *** Welcome to pxar ***
[13:20:17.511] <TB3> INFO: *** Today: 2016/01/18
[13:20:17.570] <TB3> INFO: *** Version: b2d3
[13:20:17.570] <TB3> INFO: readRocDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//003_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//003_HRData_50//dacParameters35_C15.dat
[13:20:17.571] <TB3> INFO: readTbmDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//003_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//003_HRData_50//tbmParameters_C0b.dat
[13:20:17.571] <TB3> INFO: readMaskFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//003_HRData_50//defaultMaskFile.dat
[13:20:17.571] <TB3> INFO: readTrimFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//003_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//003_HRData_50//trimParameters35_C15.dat
[13:20:17.661] <TB3> INFO: clk: 4
[13:20:17.661] <TB3> INFO: ctr: 4
[13:20:17.661] <TB3> INFO: sda: 19
[13:20:17.661] <TB3> INFO: tin: 9
[13:20:17.661] <TB3> INFO: level: 15
[13:20:17.661] <TB3> INFO: triggerdelay: 0
[13:20:17.661] <TB3> QUIET: Instanciating API for pxar prod-12
[13:20:17.661] <TB3> INFO: Log level: INFO
[13:20:17.674] <TB3> INFO: Found DTB DTB_WWV6Z5
[13:20:17.685] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[13:20:17.688] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[13:20:17.690] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[13:20:19.261] <TB3> INFO: DUT info:
[13:20:19.261] <TB3> INFO: The DUT currently contains the following objects:
[13:20:19.261] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[13:20:19.261] <TB3> INFO: TBM Core alpha (0): 7 registers set
[13:20:19.261] <TB3> INFO: TBM Core beta (1): 7 registers set
[13:20:19.261] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:20:19.261] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.261] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:20:19.666] <TB3> INFO: enter 'restricted' command line mode
[13:20:19.666] <TB3> INFO: enter test to run
[13:20:19.666] <TB3> INFO: test: delay setting parameters: ->5<-
[13:20:19.666] <TB3> INFO: delay test by 5 seconds...
[13:20:24.666] <TB3> INFO: enter test to run
[13:20:24.666] <TB3> INFO: test: Xray no parameter change
[13:20:24.666] <TB3> INFO: running: xray
[13:20:24.667] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//003_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//003_HRData_50//phCalibrationFitErr35_C15.dat
[13:20:24.841] <TB3> INFO: ######################################################################
[13:20:24.841] <TB3> INFO: PixTestXray::doTest()
[13:20:24.841] <TB3> INFO: ######################################################################
[13:20:24.841] <TB3> INFO: ----------------------------------------------------------------------
[13:20:24.841] <TB3> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[13:20:24.841] <TB3> INFO: ----------------------------------------------------------------------
[13:20:25.808] <TB3> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[13:20:32.559] <TB3> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[13:20:58.057] <TB3> INFO: Resuming triggers.
[13:21:04.818] <TB3> INFO: run duration 13 seconds, buffer almost full (81%), pausing triggers.
[13:21:30.294] <TB3> INFO: Resuming triggers.
[13:21:37.052] <TB3> INFO: run duration 20 seconds, buffer almost full (81%), pausing triggers.
[13:22:03.871] <TB3> INFO: Resuming triggers.
[13:22:10.625] <TB3> INFO: run duration 27 seconds, buffer almost full (81%), pausing triggers.
[13:22:37.081] <TB3> INFO: Resuming triggers.
[13:22:43.837] <TB3> INFO: run duration 33 seconds, buffer almost full (81%), pausing triggers.
[13:23:10.576] <TB3> INFO: Resuming triggers.
[13:23:17.337] <TB3> INFO: run duration 40 seconds, buffer almost full (81%), pausing triggers.
[13:23:43.847] <TB3> INFO: Resuming triggers.
[13:23:50.605] <TB3> INFO: run duration 47 seconds, buffer almost full (81%), pausing triggers.
[13:24:17.487] <TB3> INFO: Resuming triggers.
[13:24:24.244] <TB3> INFO: run duration 54 seconds, buffer almost full (81%), pausing triggers.
[13:24:50.317] <TB3> INFO: Resuming triggers.
[13:24:57.072] <TB3> INFO: run duration 60 seconds, buffer almost full (81%), pausing triggers.
[13:25:23.181] <TB3> INFO: Resuming triggers.
[13:25:29.935] <TB3> INFO: run duration 67 seconds, buffer almost full (81%), pausing triggers.
[13:25:56.735] <TB3> INFO: Resuming triggers.
[13:26:03.483] <TB3> INFO: run duration 74 seconds, buffer almost full (81%), pausing triggers.
[13:26:31.419] <TB3> INFO: Resuming triggers.
[13:26:38.165] <TB3> INFO: run duration 80 seconds, buffer almost full (81%), pausing triggers.
[13:27:04.887] <TB3> INFO: Resuming triggers.
[13:27:11.632] <TB3> INFO: run duration 87 seconds, buffer almost full (81%), pausing triggers.
[13:27:38.030] <TB3> INFO: Resuming triggers.
[13:27:44.780] <TB3> INFO: run duration 94 seconds, buffer almost full (81%), pausing triggers.
[13:28:10.778] <TB3> INFO: Resuming triggers.
[13:28:16.303] <TB3> INFO: data taking finished, elapsed time: 100 seconds.
[13:28:38.562] <TB3> INFO: PixTest:: pg_setup set to default.
[13:28:38.563] <TB3> INFO: PixTestXray::doPhRun() done
[13:28:38.563] <TB3> INFO: PixTestXray::doTest() done
[13:28:38.777] <TB3> INFO: enter test to run
[13:28:38.777] <TB3> INFO: test: no parameter change
[13:28:38.985] <TB3> QUIET: Connection to board 121 closed.
[13:28:39.066] <TB3> INFO: pXar: this is the end, my friend

[13:31:01.175] <TB3> INFO: *** Welcome to pxar ***
[13:31:01.175] <TB3> INFO: *** Today: 2016/01/18
[13:31:01.237] <TB3> INFO: *** Version: b2d3
[13:31:01.237] <TB3> INFO: readRocDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//004_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//004_HRData_150//dacParameters35_C15.dat
[13:31:01.238] <TB3> INFO: readTbmDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//004_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//004_HRData_150//tbmParameters_C0b.dat
[13:31:01.238] <TB3> INFO: readMaskFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//004_HRData_150//defaultMaskFile.dat
[13:31:01.238] <TB3> INFO: readTrimFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//004_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//004_HRData_150//trimParameters35_C15.dat
[13:31:01.328] <TB3> INFO: clk: 4
[13:31:01.328] <TB3> INFO: ctr: 4
[13:31:01.328] <TB3> INFO: sda: 19
[13:31:01.328] <TB3> INFO: tin: 9
[13:31:01.328] <TB3> INFO: level: 15
[13:31:01.328] <TB3> INFO: triggerdelay: 0
[13:31:01.328] <TB3> QUIET: Instanciating API for pxar prod-12
[13:31:01.328] <TB3> INFO: Log level: INFO
[13:31:01.341] <TB3> INFO: Found DTB DTB_WWV6Z5
[13:31:01.354] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[13:31:01.357] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[13:31:01.360] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[13:31:02.918] <TB3> INFO: DUT info:
[13:31:02.919] <TB3> INFO: The DUT currently contains the following objects:
[13:31:02.919] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[13:31:02.919] <TB3> INFO: TBM Core alpha (0): 7 registers set
[13:31:02.919] <TB3> INFO: TBM Core beta (1): 7 registers set
[13:31:02.919] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:31:02.919] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:02.919] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:31:03.320] <TB3> INFO: enter 'restricted' command line mode
[13:31:03.320] <TB3> INFO: enter test to run
[13:31:03.320] <TB3> INFO: test: delay setting parameters: ->5<-
[13:31:03.320] <TB3> INFO: delay test by 5 seconds...
[13:31:08.320] <TB3> INFO: enter test to run
[13:31:08.320] <TB3> INFO: test: Xray no parameter change
[13:31:08.320] <TB3> INFO: running: xray
[13:31:08.320] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//004_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//004_HRData_150//phCalibrationFitErr35_C15.dat
[13:31:08.489] <TB3> INFO: ######################################################################
[13:31:08.489] <TB3> INFO: PixTestXray::doTest()
[13:31:08.489] <TB3> INFO: ######################################################################
[13:31:08.489] <TB3> INFO: ----------------------------------------------------------------------
[13:31:08.489] <TB3> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[13:31:08.489] <TB3> INFO: ----------------------------------------------------------------------
[13:31:09.454] <TB3> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[13:31:13.156] <TB3> INFO: run duration 3 seconds, buffer almost full (81%), pausing triggers.
[13:31:40.578] <TB3> INFO: Resuming triggers.
[13:31:44.294] <TB3> INFO: run duration 7 seconds, buffer almost full (81%), pausing triggers.
[13:32:11.453] <TB3> INFO: Resuming triggers.
[13:32:15.170] <TB3> INFO: run duration 11 seconds, buffer almost full (81%), pausing triggers.
[13:32:43.118] <TB3> INFO: Resuming triggers.
[13:32:46.832] <TB3> INFO: run duration 14 seconds, buffer almost full (81%), pausing triggers.
[13:33:14.535] <TB3> INFO: Resuming triggers.
[13:33:18.251] <TB3> INFO: run duration 18 seconds, buffer almost full (81%), pausing triggers.
[13:33:46.029] <TB3> INFO: Resuming triggers.
[13:33:49.743] <TB3> INFO: run duration 22 seconds, buffer almost full (81%), pausing triggers.
[13:34:19.435] <TB3> INFO: Resuming triggers.
[13:34:23.152] <TB3> INFO: run duration 25 seconds, buffer almost full (81%), pausing triggers.
[13:34:51.569] <TB3> INFO: Resuming triggers.
[13:34:55.282] <TB3> INFO: run duration 29 seconds, buffer almost full (81%), pausing triggers.
[13:35:22.623] <TB3> INFO: Resuming triggers.
[13:35:26.340] <TB3> INFO: run duration 33 seconds, buffer almost full (81%), pausing triggers.
[13:35:53.731] <TB3> INFO: Resuming triggers.
[13:35:57.447] <TB3> INFO: run duration 37 seconds, buffer almost full (81%), pausing triggers.
[13:36:25.535] <TB3> INFO: Resuming triggers.
[13:36:29.247] <TB3> INFO: run duration 40 seconds, buffer almost full (81%), pausing triggers.
[13:36:56.770] <TB3> INFO: Resuming triggers.
[13:37:00.486] <TB3> INFO: run duration 44 seconds, buffer almost full (81%), pausing triggers.
[13:37:28.580] <TB3> INFO: Resuming triggers.
[13:37:32.294] <TB3> INFO: run duration 48 seconds, buffer almost full (81%), pausing triggers.
[13:38:00.549] <TB3> INFO: Resuming triggers.
[13:38:04.263] <TB3> INFO: run duration 51 seconds, buffer almost full (81%), pausing triggers.
[13:38:34.322] <TB3> INFO: Resuming triggers.
[13:38:38.031] <TB3> INFO: run duration 55 seconds, buffer almost full (81%), pausing triggers.
[13:39:06.178] <TB3> INFO: Resuming triggers.
[13:39:09.889] <TB3> INFO: run duration 59 seconds, buffer almost full (81%), pausing triggers.
[13:39:36.967] <TB3> INFO: Resuming triggers.
[13:39:40.677] <TB3> INFO: run duration 63 seconds, buffer almost full (81%), pausing triggers.
[13:40:07.285] <TB3> INFO: Resuming triggers.
[13:40:10.998] <TB3> INFO: run duration 66 seconds, buffer almost full (81%), pausing triggers.
[13:40:39.202] <TB3> INFO: Resuming triggers.
[13:40:42.913] <TB3> INFO: run duration 70 seconds, buffer almost full (81%), pausing triggers.
[13:41:10.868] <TB3> INFO: Resuming triggers.
[13:41:14.580] <TB3> INFO: run duration 74 seconds, buffer almost full (81%), pausing triggers.
[13:41:42.932] <TB3> INFO: Resuming triggers.
[13:41:46.641] <TB3> INFO: run duration 77 seconds, buffer almost full (81%), pausing triggers.
[13:42:15.159] <TB3> INFO: Resuming triggers.
[13:42:18.872] <TB3> INFO: run duration 81 seconds, buffer almost full (81%), pausing triggers.
[13:42:47.281] <TB3> INFO: Resuming triggers.
[13:42:50.994] <TB3> INFO: run duration 85 seconds, buffer almost full (81%), pausing triggers.
[13:43:19.354] <TB3> INFO: Resuming triggers.
[13:43:23.063] <TB3> INFO: run duration 89 seconds, buffer almost full (81%), pausing triggers.
[13:43:50.918] <TB3> INFO: Resuming triggers.
[13:43:54.630] <TB3> INFO: run duration 92 seconds, buffer almost full (81%), pausing triggers.
[13:44:22.200] <TB3> INFO: Resuming triggers.
[13:44:25.911] <TB3> INFO: run duration 96 seconds, buffer almost full (81%), pausing triggers.
[13:44:52.808] <TB3> INFO: Resuming triggers.
[13:44:56.355] <TB3> INFO: data taking finished, elapsed time: 100 seconds.
[13:45:22.837] <TB3> INFO: PixTest:: pg_setup set to default.
[13:45:22.838] <TB3> INFO: PixTestXray::doPhRun() done
[13:45:22.838] <TB3> INFO: PixTestXray::doTest() done
[13:45:23.024] <TB3> INFO: enter test to run
[13:45:23.024] <TB3> INFO: test: no parameter change
[13:45:23.222] <TB3> QUIET: Connection to board 121 closed.
[13:45:23.308] <TB3> INFO: pXar: this is the end, my friend

[13:49:31.188] <TB3> INFO: *** Welcome to pxar ***
[13:49:31.188] <TB3> INFO: *** Today: 2016/01/18
[13:49:31.255] <TB3> INFO: *** Version: b2d3
[13:49:31.255] <TB3> INFO: readRocDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//005_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//005_HRSCurves_100//dacParameters35_C15.dat
[13:49:31.255] <TB3> INFO: readTbmDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//005_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//005_HRSCurves_100//tbmParameters_C0b.dat
[13:49:31.256] <TB3> INFO: readMaskFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//005_HRSCurves_100//defaultMaskFile.dat
[13:49:31.256] <TB3> INFO: readTrimFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//005_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//005_HRSCurves_100//trimParameters35_C15.dat
[13:49:31.339] <TB3> INFO: clk: 4
[13:49:31.339] <TB3> INFO: ctr: 4
[13:49:31.339] <TB3> INFO: sda: 19
[13:49:31.339] <TB3> INFO: tin: 9
[13:49:31.339] <TB3> INFO: level: 15
[13:49:31.339] <TB3> INFO: triggerdelay: 0
[13:49:31.339] <TB3> QUIET: Instanciating API for pxar prod-12
[13:49:31.339] <TB3> INFO: Log level: INFO
[13:49:31.352] <TB3> INFO: Found DTB DTB_WWV6Z5
[13:49:31.363] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[13:49:31.366] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[13:49:31.368] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[13:49:32.935] <TB3> INFO: DUT info:
[13:49:32.935] <TB3> INFO: The DUT currently contains the following objects:
[13:49:32.935] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[13:49:32.935] <TB3> INFO: TBM Core alpha (0): 7 registers set
[13:49:32.935] <TB3> INFO: TBM Core beta (1): 7 registers set
[13:49:32.935] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:49:32.935] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:32.935] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:49:33.336] <TB3> INFO: enter 'restricted' command line mode
[13:49:33.336] <TB3> INFO: enter test to run
[13:49:33.336] <TB3> INFO: test: Highrate no parameter change
[13:49:33.336] <TB3> INFO: running: highrate
[13:49:33.337] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//005_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//005_HRSCurves_100//phCalibrationFitErr35_C15.dat
[13:49:33.484] <TB3> INFO: ----------------------------------------------------------------------
[13:49:33.484] <TB3> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[13:49:33.484] <TB3> INFO: ----------------------------------------------------------------------
[13:49:33.490] <TB3> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 15 .. 75 (20/-1) hits flags = 896 (plus default)
[13:49:33.501] <TB3> INFO: dacScan step from 15 .. 34
[13:49:33.501] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[13:49:33.502] <TB3> INFO: run 1 of 1
[13:49:34.122] <TB3> INFO: Expecting 4160000 events.
[13:50:06.623] <TB3> INFO: 475700 events read in total (31972ms).
[13:50:38.559] <TB3> INFO: 953900 events read in total (63908ms).
[13:51:10.886] <TB3> INFO: 1432050 events read in total (96235ms).
[13:51:43.251] <TB3> INFO: 1909950 events read in total (128600ms).
[13:52:15.047] <TB3> INFO: 2388150 events read in total (160396ms).
[13:52:47.556] <TB3> INFO: 2866050 events read in total (192905ms).
[13:53:19.664] <TB3> INFO: 3343600 events read in total (225013ms).
[13:53:52.576] <TB3> INFO: 3821100 events read in total (257925ms).
[13:54:15.453] <TB3> INFO: 4160000 events read in total (280802ms).
[13:54:15.719] <TB3> INFO: Test took 282217ms.
[13:54:18.891] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:54:23.871] <TB3> INFO: dacScan step from 35 .. 54
[13:54:23.871] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[13:54:23.871] <TB3> INFO: run 1 of 1
[13:54:24.467] <TB3> INFO: Expecting 4160000 events.
[13:54:55.657] <TB3> INFO: 390500 events read in total (30662ms).
[13:55:26.381] <TB3> INFO: 781900 events read in total (61386ms).
[13:55:57.396] <TB3> INFO: 1172350 events read in total (92401ms).
[13:56:27.337] <TB3> INFO: 1562250 events read in total (122342ms).
[13:56:57.717] <TB3> INFO: 1950600 events read in total (152722ms).
[13:57:28.353] <TB3> INFO: 2337350 events read in total (183358ms).
[13:57:58.273] <TB3> INFO: 2721150 events read in total (213278ms).
[13:58:27.872] <TB3> INFO: 3101700 events read in total (242877ms).
[13:58:58.415] <TB3> INFO: 3479750 events read in total (273420ms).
[13:59:29.116] <TB3> INFO: 3856250 events read in total (304121ms).
[13:59:53.098] <TB3> INFO: 4160000 events read in total (328103ms).
[13:59:53.283] <TB3> INFO: Test took 329411ms.
[13:59:54.867] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:59:59.872] <TB3> INFO: dacScan step from 55 .. 74
[13:59:59.872] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[13:59:59.872] <TB3> INFO: run 1 of 1
[14:00:00.494] <TB3> INFO: Expecting 4160000 events.
[14:00:31.795] <TB3> INFO: 349700 events read in total (30766ms).
[14:01:01.929] <TB3> INFO: 700050 events read in total (60900ms).
[14:01:31.684] <TB3> INFO: 1050800 events read in total (90655ms).
[14:02:01.290] <TB3> INFO: 1401300 events read in total (120261ms).
[14:02:30.817] <TB3> INFO: 1751600 events read in total (149788ms).
[14:03:00.256] <TB3> INFO: 2102050 events read in total (179227ms).
[14:03:29.676] <TB3> INFO: 2452800 events read in total (208647ms).
[14:03:59.828] <TB3> INFO: 2803450 events read in total (238799ms).
[14:04:29.159] <TB3> INFO: 3153900 events read in total (268130ms).
[14:04:58.342] <TB3> INFO: 3504700 events read in total (297314ms).
[14:05:28.456] <TB3> INFO: 3855300 events read in total (327427ms).
[14:05:54.823] <TB3> INFO: 4160000 events read in total (353794ms).
[14:05:54.989] <TB3> INFO: Test took 355117ms.
[14:05:56.504] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:06:01.559] <TB3> INFO: dacScan step from 75 .. 75
[14:06:01.559] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[14:06:01.560] <TB3> INFO: run 1 of 1
[14:06:02.154] <TB3> INFO: Expecting 208000 events.
[14:06:21.255] <TB3> INFO: 208000 events read in total (18574ms).
[14:06:21.261] <TB3> INFO: Test took 19701ms.
[14:06:21.344] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:06:21.871] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:23.850] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:24.886] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:25.923] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:26.964] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:28.014] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:29.071] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:30.121] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:31.191] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:32.348] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:33.444] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:34.551] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:35.644] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:36.754] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:37.861] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:38.908] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[14:06:40.047] <TB3> INFO: PixTest:: pg_setup set to default.
[14:06:40.049] <TB3> INFO: vcal mean: 37.15 37.86 37.25 40.45 39.93 41.41 41.43 41.16 41.15 42.05 41.97 41.30 40.36 37.37 37.88 38.07
[14:06:40.049] <TB3> INFO: vcal RMS: 1.02 1.06 0.83 1.32 1.13 1.32 1.43 1.47 1.32 1.42 1.44 1.46 1.22 1.13 1.03 0.98
[14:06:40.049] <TB3> INFO: number of X-ray hits detected: 164556 170415 150744 290516 293673 365312 351041 361183 344670 365263 378198 328179 276125 156924 176753 176007
[14:06:40.049] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[14:06:40.049] <TB3> INFO: X-ray hit rate [MHz/cm2]: 48.2 49.9 44.2 85.2 86.1 107.1 102.9 105.9 101.0 107.1 110.9 96.2 80.9 46.0 51.8 51.6
[14:06:40.049] <TB3> INFO: PixTestHighRate::doXNoiseMaps() done
[14:06:40.288] <TB3> INFO: enter test to run
[14:06:40.294] <TB3> INFO: test: no parameter change
[14:06:40.543] <TB3> QUIET: Connection to board 121 closed.
[14:06:40.654] <TB3> INFO: pXar: this is the end, my friend

[14:31:24.938] <TB3> INFO: *** Welcome to pxar ***
[14:31:24.938] <TB3> INFO: *** Today: 2016/01/18
[14:31:24.999] <TB3> INFO: *** Version: b2d3
[14:31:25.000] <TB3> INFO: readRocDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[14:31:25.000] <TB3> INFO: readTbmDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[14:31:25.000] <TB3> INFO: readMaskFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[14:31:25.000] <TB3> INFO: readTrimFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[14:31:25.084] <TB3> INFO: clk: 4
[14:31:25.084] <TB3> INFO: ctr: 4
[14:31:25.084] <TB3> INFO: sda: 19
[14:31:25.084] <TB3> INFO: tin: 9
[14:31:25.084] <TB3> INFO: level: 15
[14:31:25.084] <TB3> INFO: triggerdelay: 0
[14:31:25.084] <TB3> QUIET: Instanciating API for pxar prod-12
[14:31:25.084] <TB3> INFO: Log level: INFO
[14:31:25.097] <TB3> INFO: Found DTB DTB_WWV6Z5
[14:31:25.108] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[14:31:25.112] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[14:31:25.114] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[14:31:26.661] <TB3> INFO: DUT info:
[14:31:26.661] <TB3> INFO: The DUT currently contains the following objects:
[14:31:26.661] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[14:31:26.661] <TB3> INFO: TBM Core alpha (0): 7 registers set
[14:31:26.661] <TB3> INFO: TBM Core beta (1): 7 registers set
[14:31:26.661] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[14:31:26.661] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:26.661] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[14:31:27.062] <TB3> INFO: enter 'restricted' command line mode
[14:31:27.062] <TB3> INFO: enter test to run
[14:31:27.062] <TB3> INFO: test: HighRate no parameter change
[14:31:27.062] <TB3> INFO: running: highrate
[14:31:27.062] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[14:31:27.222] <TB3> INFO: ----------------------------------------------------------------------
[14:31:27.222] <TB3> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[14:31:27.222] <TB3> INFO: ----------------------------------------------------------------------
[14:31:27.359] <TB3> INFO: Expecting 768 events.
[14:31:28.586] <TB3> INFO: 768 events read in total (509ms).
[14:31:28.680] <TB3> INFO: Test took 1453ms.
[14:31:29.295] <TB3> INFO: Expecting 41600 events.
[14:31:32.918] <TB3> INFO: 41600 events read in total (3096ms).
[14:31:32.919] <TB3> INFO: Test took 4235ms.
[14:31:32.988] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:31:33.625] <TB3> INFO: Expecting 41600 events.
[14:31:37.329] <TB3> INFO: 41600 events read in total (3177ms).
[14:31:37.331] <TB3> INFO: Test took 4317ms.
[14:31:37.404] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:31:38.045] <TB3> INFO: Expecting 41600 events.
[14:31:42.009] <TB3> INFO: 41600 events read in total (3437ms).
[14:31:42.012] <TB3> INFO: Test took 4579ms.
[14:31:42.093] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:31:42.742] <TB3> INFO: Expecting 41600 events.
[14:31:46.608] <TB3> INFO: 41600 events read in total (3339ms).
[14:31:46.609] <TB3> INFO: Test took 4489ms.
[14:31:46.680] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:31:47.317] <TB3> INFO: Expecting 41600 events.
[14:31:51.003] <TB3> INFO: 41600 events read in total (3159ms).
[14:31:51.005] <TB3> INFO: Test took 4300ms.
[14:31:51.072] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:31:51.711] <TB3> INFO: Expecting 41600 events.
[14:31:55.562] <TB3> INFO: 41600 events read in total (3324ms).
[14:31:55.564] <TB3> INFO: Test took 4465ms.
[14:31:55.632] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:31:56.290] <TB3> INFO: Expecting 41600 events.
[14:32:00.246] <TB3> INFO: 41600 events read in total (3429ms).
[14:32:00.248] <TB3> INFO: Test took 4585ms.
[14:32:00.324] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:32:00.976] <TB3> INFO: Expecting 41600 events.
[14:32:04.911] <TB3> INFO: 41600 events read in total (3408ms).
[14:32:04.913] <TB3> INFO: Test took 4562ms.
[14:32:04.984] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:32:05.622] <TB3> INFO: Expecting 41600 events.
[14:32:09.451] <TB3> INFO: 41600 events read in total (3302ms).
[14:32:09.452] <TB3> INFO: Test took 4443ms.
[14:32:09.526] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:32:10.183] <TB3> INFO: Expecting 41600 events.
[14:32:14.141] <TB3> INFO: 41600 events read in total (3430ms).
[14:32:14.143] <TB3> INFO: Test took 4585ms.
[14:32:14.222] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:32:14.877] <TB3> INFO: Expecting 41600 events.
[14:32:18.726] <TB3> INFO: 41600 events read in total (3322ms).
[14:32:18.728] <TB3> INFO: Test took 4474ms.
[14:32:18.805] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:32:19.449] <TB3> INFO: Expecting 41600 events.
[14:32:23.408] <TB3> INFO: 41600 events read in total (3432ms).
[14:32:23.410] <TB3> INFO: Test took 4576ms.
[14:32:23.479] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:32:24.123] <TB3> INFO: Expecting 41600 events.
[14:32:27.910] <TB3> INFO: 41600 events read in total (3260ms).
[14:32:27.911] <TB3> INFO: Test took 4401ms.
[14:32:27.981] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:32:28.620] <TB3> INFO: Expecting 41600 events.
[14:32:32.438] <TB3> INFO: 41600 events read in total (3291ms).
[14:32:32.440] <TB3> INFO: Test took 4432ms.
[14:32:32.511] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:32:33.152] <TB3> INFO: Expecting 41600 events.
[14:32:36.984] <TB3> INFO: 41600 events read in total (3305ms).
[14:32:36.985] <TB3> INFO: Test took 4445ms.
[14:32:37.056] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:32:37.695] <TB3> INFO: Expecting 41600 events.
[14:32:41.419] <TB3> INFO: 41600 events read in total (3197ms).
[14:32:41.421] <TB3> INFO: Test took 4338ms.
[14:32:41.501] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:32:42.141] <TB3> INFO: Expecting 41600 events.
[14:32:45.842] <TB3> INFO: 41600 events read in total (3174ms).
[14:32:45.843] <TB3> INFO: Test took 4314ms.
[14:32:45.912] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:32:46.554] <TB3> INFO: Expecting 41600 events.
[14:32:50.382] <TB3> INFO: 41600 events read in total (3301ms).
[14:32:50.384] <TB3> INFO: Test took 4446ms.
[14:32:50.453] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:32:51.090] <TB3> INFO: Expecting 41600 events.
[14:32:54.860] <TB3> INFO: 41600 events read in total (3243ms).
[14:32:54.861] <TB3> INFO: Test took 4383ms.
[14:32:54.926] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:32:55.563] <TB3> INFO: Expecting 41600 events.
[14:32:59.092] <TB3> INFO: 41600 events read in total (3002ms).
[14:32:59.094] <TB3> INFO: Test took 4142ms.
[14:32:59.158] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:32:59.464] <TB3> INFO: enter test to run
[14:32:59.464] <TB3> INFO: test: Pretest no parameter change
[14:32:59.464] <TB3> INFO: running: pretest
[14:32:59.464] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[14:32:59.464] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[14:32:59.464] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[14:32:59.464] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[14:32:59.464] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[14:32:59.464] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[14:32:59.464] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[14:32:59.464] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[14:32:59.464] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[14:32:59.465] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[14:32:59.465] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[14:32:59.465] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[14:32:59.465] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[14:32:59.465] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[14:32:59.465] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[14:32:59.465] <TB3> INFO: write dac parameters into /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[14:32:59.465] <TB3> INFO: enter test to run
[14:32:59.465] <TB3> INFO: test: no parameter change
[14:32:59.665] <TB3> QUIET: Connection to board 121 closed.
[14:32:59.745] <TB3> INFO: pXar: this is the end, my friend

[14:33:35.891] <TB3> INFO: *** Welcome to pxar ***
[14:33:35.891] <TB3> INFO: *** Today: 2016/01/18
[14:33:35.950] <TB3> INFO: *** Version: b2d3
[14:33:35.950] <TB3> INFO: readRocDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//011_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//011_HREfficiency_50//dacParameters35_C15.dat
[14:33:35.951] <TB3> INFO: readTbmDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//011_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//011_HREfficiency_50//tbmParameters_C0b.dat
[14:33:35.951] <TB3> INFO: readMaskFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//011_HREfficiency_50//defaultMaskFile.dat
[14:33:35.951] <TB3> INFO: readTrimFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//011_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//011_HREfficiency_50//trimParameters35_C15.dat
[14:33:36.047] <TB3> INFO: clk: 4
[14:33:36.047] <TB3> INFO: ctr: 4
[14:33:36.047] <TB3> INFO: sda: 19
[14:33:36.047] <TB3> INFO: tin: 9
[14:33:36.047] <TB3> INFO: level: 15
[14:33:36.047] <TB3> INFO: triggerdelay: 0
[14:33:36.047] <TB3> QUIET: Instanciating API for pxar prod-12
[14:33:36.047] <TB3> INFO: Log level: INFO
[14:33:36.060] <TB3> INFO: Found DTB DTB_WWV6Z5
[14:33:36.072] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[14:33:36.075] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[14:33:36.077] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[14:33:37.646] <TB3> INFO: DUT info:
[14:33:37.646] <TB3> INFO: The DUT currently contains the following objects:
[14:33:37.646] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[14:33:37.646] <TB3> INFO: TBM Core alpha (0): 7 registers set
[14:33:37.646] <TB3> INFO: TBM Core beta (1): 7 registers set
[14:33:37.646] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[14:33:37.646] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:37.646] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[14:33:38.047] <TB3> INFO: enter 'restricted' command line mode
[14:33:38.047] <TB3> INFO: enter test to run
[14:33:38.047] <TB3> INFO: test: PixelAlive no parameter change
[14:33:38.047] <TB3> INFO: running: pixelalive
[14:33:38.051] <TB3> INFO: ######################################################################
[14:33:38.051] <TB3> INFO: PixTestAlive::doTest()
[14:33:38.051] <TB3> INFO: ######################################################################
[14:33:38.052] <TB3> INFO: ----------------------------------------------------------------------
[14:33:38.052] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:33:38.052] <TB3> INFO: ----------------------------------------------------------------------
[14:33:38.358] <TB3> INFO: Expecting 208000 events.
[14:33:49.226] <TB3> INFO: 208000 events read in total (10150ms).
[14:33:49.249] <TB3> INFO: Test took 11196ms.
[14:33:49.257] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:33:49.503] <TB3> INFO: PixTestAlive::aliveTest() done
[14:33:49.503] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:33:49.504] <TB3> INFO: ----------------------------------------------------------------------
[14:33:49.504] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:33:49.504] <TB3> INFO: ----------------------------------------------------------------------
[14:33:49.829] <TB3> INFO: Expecting 208000 events.
[14:33:56.901] <TB3> INFO: 208000 events read in total (6356ms).
[14:33:56.901] <TB3> INFO: Test took 7396ms.
[14:33:56.901] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:33:56.902] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[14:33:57.205] <TB3> INFO: PixTestAlive::maskTest() done
[14:33:57.206] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:33:57.207] <TB3> INFO: ----------------------------------------------------------------------
[14:33:57.207] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:33:57.207] <TB3> INFO: ----------------------------------------------------------------------
[14:33:57.510] <TB3> INFO: Expecting 208000 events.
[14:34:08.126] <TB3> INFO: 208000 events read in total (9900ms).
[14:34:08.126] <TB3> INFO: Test took 10918ms.
[14:34:08.135] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:34:08.363] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[14:34:08.363] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:34:08.363] <TB3> INFO: PixTestAlive::doTest() done, duration: 30 seconds
[14:34:08.394] <TB3> INFO: enter test to run
[14:34:08.394] <TB3> INFO: test: delay setting parameters: ->2<-
[14:34:08.394] <TB3> INFO: delay test by 2 seconds...
[14:34:10.394] <TB3> INFO: enter test to run
[14:34:10.394] <TB3> INFO: test: HighRate no parameter change
[14:34:10.394] <TB3> INFO: running: highrate
[14:34:10.395] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//011_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//011_HREfficiency_50//phCalibrationFitErr35_C15.dat
[14:34:10.552] <TB3> INFO: ----------------------------------------------------------------------
[14:34:10.552] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[14:34:10.552] <TB3> INFO: ----------------------------------------------------------------------
[14:34:11.151] <TB3> INFO: Expecting 208000 events.
[14:34:24.748] <TB3> INFO: 208000 events read in total (13070ms).
[14:34:24.753] <TB3> INFO: Test took 14197ms.
[14:34:24.992] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:34:25.265] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:34:25.265] <TB3> INFO: number of red-efficiency pixels: 92 114 94 175 195 287 286 255 245 239 275 239 199 95 108 103
[14:34:25.265] <TB3> INFO: number of X-ray hits detected: 81280 83244 73543 145405 146198 183679 175699 180702 171420 182679 190415 163670 136614 75653 85988 86214
[14:34:25.265] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[14:34:25.265] <TB3> INFO: number of Vcal hits detected: 207906 207883 207905 207820 207798 207696 207703 207735 207731 207751 207712 207749 207793 207903 207891 207894
[14:34:25.265] <TB3> INFO: Vcal hit fiducial efficiency (%): 100.0 99.9 100.0 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 100.0 99.9 100.0
[14:34:25.265] <TB3> INFO: Vcal hit overall efficiency (%): 100.0 99.9 100.0 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 100.0 99.9 99.9
[14:34:25.265] <TB3> INFO: X-ray hit rate [MHz/cm2]: 23.8 24.4 21.6 42.6 42.9 53.8 51.5 53.0 50.2 53.5 55.8 48.0 40.0 22.2 25.2 25.3
[14:34:25.265] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[14:34:25.290] <TB3> INFO: PixTest:: pg_setup set to default.
[14:34:25.298] <TB3> INFO: enter test to run
[14:34:25.298] <TB3> INFO: test: no parameter change
[14:34:25.563] <TB3> QUIET: Connection to board 121 closed.
[14:34:25.642] <TB3> INFO: pXar: this is the end, my friend

[14:35:01.932] <TB3> INFO: *** Welcome to pxar ***
[14:35:01.932] <TB3> INFO: *** Today: 2016/01/18
[14:35:01.992] <TB3> INFO: *** Version: b2d3
[14:35:01.993] <TB3> INFO: readRocDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//012_HREfficiency_75//dacParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//012_HREfficiency_75//dacParameters35_C15.dat
[14:35:01.994] <TB3> INFO: readTbmDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//012_HREfficiency_75//tbmParameters_C0a.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//012_HREfficiency_75//tbmParameters_C0b.dat
[14:35:01.994] <TB3> INFO: readMaskFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//012_HREfficiency_75//defaultMaskFile.dat
[14:35:01.994] <TB3> INFO: readTrimFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//012_HREfficiency_75//trimParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//012_HREfficiency_75//trimParameters35_C15.dat
[14:35:02.088] <TB3> INFO: clk: 4
[14:35:02.088] <TB3> INFO: ctr: 4
[14:35:02.088] <TB3> INFO: sda: 19
[14:35:02.088] <TB3> INFO: tin: 9
[14:35:02.088] <TB3> INFO: level: 15
[14:35:02.088] <TB3> INFO: triggerdelay: 0
[14:35:02.088] <TB3> QUIET: Instanciating API for pxar prod-12
[14:35:02.088] <TB3> INFO: Log level: INFO
[14:35:02.101] <TB3> INFO: Found DTB DTB_WWV6Z5
[14:35:02.112] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[14:35:02.115] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[14:35:02.117] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[14:35:03.662] <TB3> INFO: DUT info:
[14:35:03.662] <TB3> INFO: The DUT currently contains the following objects:
[14:35:03.662] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[14:35:03.662] <TB3> INFO: TBM Core alpha (0): 7 registers set
[14:35:03.662] <TB3> INFO: TBM Core beta (1): 7 registers set
[14:35:03.662] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[14:35:03.662] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:03.662] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[14:35:04.063] <TB3> INFO: enter 'restricted' command line mode
[14:35:04.063] <TB3> INFO: enter test to run
[14:35:04.063] <TB3> INFO: test: PixelAlive no parameter change
[14:35:04.063] <TB3> INFO: running: pixelalive
[14:35:04.067] <TB3> INFO: ######################################################################
[14:35:04.067] <TB3> INFO: PixTestAlive::doTest()
[14:35:04.067] <TB3> INFO: ######################################################################
[14:35:04.069] <TB3> INFO: ----------------------------------------------------------------------
[14:35:04.069] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:35:04.069] <TB3> INFO: ----------------------------------------------------------------------
[14:35:04.374] <TB3> INFO: Expecting 208000 events.
[14:35:15.725] <TB3> INFO: 208000 events read in total (10633ms).
[14:35:15.727] <TB3> INFO: Test took 11657ms.
[14:35:15.734] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:35:15.990] <TB3> INFO: PixTestAlive::aliveTest() done
[14:35:15.990] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:35:15.992] <TB3> INFO: ----------------------------------------------------------------------
[14:35:15.992] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:35:15.992] <TB3> INFO: ----------------------------------------------------------------------
[14:35:16.315] <TB3> INFO: Expecting 208000 events.
[14:35:23.478] <TB3> INFO: 208000 events read in total (6448ms).
[14:35:23.479] <TB3> INFO: Test took 7486ms.
[14:35:23.479] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:35:23.480] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[14:35:23.777] <TB3> INFO: PixTestAlive::maskTest() done
[14:35:23.777] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:35:23.778] <TB3> INFO: ----------------------------------------------------------------------
[14:35:23.778] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:35:23.778] <TB3> INFO: ----------------------------------------------------------------------
[14:35:24.086] <TB3> INFO: Expecting 208000 events.
[14:35:35.141] <TB3> INFO: 208000 events read in total (10340ms).
[14:35:35.142] <TB3> INFO: Test took 11362ms.
[14:35:35.150] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:35:35.382] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[14:35:35.382] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:35:35.382] <TB3> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[14:35:35.413] <TB3> INFO: enter test to run
[14:35:35.413] <TB3> INFO: test: delay setting parameters: ->2<-
[14:35:35.413] <TB3> INFO: delay test by 2 seconds...
[14:35:37.413] <TB3> INFO: enter test to run
[14:35:37.413] <TB3> INFO: test: HighRate no parameter change
[14:35:37.413] <TB3> INFO: running: highrate
[14:35:37.413] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//012_HREfficiency_75//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//012_HREfficiency_75//phCalibrationFitErr35_C15.dat
[14:35:37.546] <TB3> INFO: ----------------------------------------------------------------------
[14:35:37.546] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[14:35:37.546] <TB3> INFO: ----------------------------------------------------------------------
[14:35:38.143] <TB3> INFO: Expecting 208000 events.
[14:35:53.751] <TB3> INFO: 208000 events read in total (15081ms).
[14:35:53.757] <TB3> INFO: Test took 16208ms.
[14:35:54.097] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:35:54.403] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:35:54.403] <TB3> INFO: number of red-efficiency pixels: 157 179 126 305 352 530 470 477 527 530 552 460 325 143 188 158
[14:35:54.403] <TB3> INFO: number of X-ray hits detected: 119320 122836 109260 213056 214593 267898 256455 263675 250897 265501 277993 241578 200775 112408 127579 126687
[14:35:54.403] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[14:35:54.403] <TB3> INFO: number of Vcal hits detected: 207837 207815 207870 207684 207622 207418 207492 207489 207400 207394 207387 207496 207661 207846 207808 207838
[14:35:54.403] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.9 99.8 99.7 99.8 99.8 99.7 99.7 99.7 99.8 99.8 99.9 99.9 99.9
[14:35:54.403] <TB3> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.8 99.8 99.7 99.8 99.8 99.7 99.7 99.7 99.8 99.8 99.9 99.9 99.9
[14:35:54.403] <TB3> INFO: X-ray hit rate [MHz/cm2]: 35.0 36.0 32.0 62.4 62.9 78.5 75.2 77.3 73.5 77.8 81.5 70.8 58.8 32.9 37.4 37.1
[14:35:54.403] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[14:35:54.428] <TB3> INFO: PixTest:: pg_setup set to default.
[14:35:54.437] <TB3> INFO: enter test to run
[14:35:54.437] <TB3> INFO: test: no parameter change
[14:35:54.660] <TB3> QUIET: Connection to board 121 closed.
[14:35:54.740] <TB3> INFO: pXar: this is the end, my friend

[14:36:28.684] <TB3> INFO: *** Welcome to pxar ***
[14:36:28.684] <TB3> INFO: *** Today: 2016/01/18
[14:36:28.750] <TB3> INFO: *** Version: b2d3
[14:36:28.750] <TB3> INFO: readRocDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//013_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//013_HREfficiency_100//dacParameters35_C15.dat
[14:36:28.751] <TB3> INFO: readTbmDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//013_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//013_HREfficiency_100//tbmParameters_C0b.dat
[14:36:28.751] <TB3> INFO: readMaskFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//013_HREfficiency_100//defaultMaskFile.dat
[14:36:28.751] <TB3> INFO: readTrimFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//013_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//013_HREfficiency_100//trimParameters35_C15.dat
[14:36:28.828] <TB3> INFO: clk: 4
[14:36:28.828] <TB3> INFO: ctr: 4
[14:36:28.828] <TB3> INFO: sda: 19
[14:36:28.828] <TB3> INFO: tin: 9
[14:36:28.828] <TB3> INFO: level: 15
[14:36:28.828] <TB3> INFO: triggerdelay: 0
[14:36:28.828] <TB3> QUIET: Instanciating API for pxar prod-12
[14:36:28.828] <TB3> INFO: Log level: INFO
[14:36:28.840] <TB3> INFO: Found DTB DTB_WWV6Z5
[14:36:28.851] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[14:36:28.858] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[14:36:28.861] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[14:36:30.404] <TB3> INFO: DUT info:
[14:36:30.404] <TB3> INFO: The DUT currently contains the following objects:
[14:36:30.404] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[14:36:30.404] <TB3> INFO: TBM Core alpha (0): 7 registers set
[14:36:30.404] <TB3> INFO: TBM Core beta (1): 7 registers set
[14:36:30.404] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[14:36:30.404] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.404] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.404] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.404] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.404] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.404] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.404] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.404] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.404] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.404] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.404] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.404] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.404] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.405] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.405] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.405] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[14:36:30.805] <TB3> INFO: enter 'restricted' command line mode
[14:36:30.805] <TB3> INFO: enter test to run
[14:36:30.805] <TB3> INFO: test: PixelAlive no parameter change
[14:36:30.805] <TB3> INFO: running: pixelalive
[14:36:30.810] <TB3> INFO: ######################################################################
[14:36:30.810] <TB3> INFO: PixTestAlive::doTest()
[14:36:30.810] <TB3> INFO: ######################################################################
[14:36:30.812] <TB3> INFO: ----------------------------------------------------------------------
[14:36:30.812] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:36:30.812] <TB3> INFO: ----------------------------------------------------------------------
[14:36:31.152] <TB3> INFO: Expecting 208000 events.
[14:36:42.290] <TB3> INFO: 208000 events read in total (10420ms).
[14:36:42.301] <TB3> INFO: Test took 11488ms.
[14:36:42.311] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:36:42.567] <TB3> INFO: PixTestAlive::aliveTest() done
[14:36:42.567] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:36:42.569] <TB3> INFO: ----------------------------------------------------------------------
[14:36:42.569] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:36:42.569] <TB3> INFO: ----------------------------------------------------------------------
[14:36:42.875] <TB3> INFO: Expecting 208000 events.
[14:36:50.144] <TB3> INFO: 208000 events read in total (6553ms).
[14:36:50.145] <TB3> INFO: Test took 7575ms.
[14:36:50.145] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:36:50.146] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[14:36:50.452] <TB3> INFO: PixTestAlive::maskTest() done
[14:36:50.452] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:36:50.454] <TB3> INFO: ----------------------------------------------------------------------
[14:36:50.454] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:36:50.454] <TB3> INFO: ----------------------------------------------------------------------
[14:36:50.789] <TB3> INFO: Expecting 208000 events.
[14:37:01.923] <TB3> INFO: 208000 events read in total (10419ms).
[14:37:01.924] <TB3> INFO: Test took 11469ms.
[14:37:01.932] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:37:02.163] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[14:37:02.163] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:37:02.163] <TB3> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[14:37:02.194] <TB3> INFO: enter test to run
[14:37:02.194] <TB3> INFO: test: delay setting parameters: ->2<-
[14:37:02.194] <TB3> INFO: delay test by 2 seconds...
[14:37:04.194] <TB3> INFO: enter test to run
[14:37:04.194] <TB3> INFO: test: HighRate no parameter change
[14:37:04.194] <TB3> INFO: running: highrate
[14:37:04.194] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//013_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//013_HREfficiency_100//phCalibrationFitErr35_C15.dat
[14:37:04.333] <TB3> INFO: ----------------------------------------------------------------------
[14:37:04.333] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[14:37:04.333] <TB3> INFO: ----------------------------------------------------------------------
[14:37:04.931] <TB3> INFO: Expecting 208000 events.
[14:37:22.507] <TB3> INFO: 208000 events read in total (17049ms).
[14:37:22.515] <TB3> INFO: Test took 18178ms.
[14:37:22.979] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:37:23.325] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:37:23.325] <TB3> INFO: number of red-efficiency pixels: 213 330 262 558 629 976 923 966 962 1027 1077 854 561 252 335 278
[14:37:23.325] <TB3> INFO: number of X-ray hits detected: 165551 171084 151959 291705 293700 366083 351505 361148 345212 364492 380143 329927 274997 155798 176612 175064
[14:37:23.325] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[14:37:23.325] <TB3> INFO: number of Vcal hits detected: 207781 207654 207713 207378 207273 206812 206904 206878 206801 206709 206643 206992 207378 207724 207648 207705
[14:37:23.325] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.9 99.8 99.9 99.7 99.7 99.5 99.5 99.5 99.5 99.5 99.4 99.6 99.7 99.9 99.8 99.9
[14:37:23.325] <TB3> INFO: Vcal hit overall efficiency (%): 99.9 99.8 99.9 99.7 99.7 99.4 99.5 99.5 99.4 99.4 99.3 99.5 99.7 99.9 99.8 99.9
[14:37:23.325] <TB3> INFO: X-ray hit rate [MHz/cm2]: 48.5 50.1 44.5 85.5 86.1 107.3 103.0 105.9 101.2 106.8 111.4 96.7 80.6 45.7 51.8 51.3
[14:37:23.325] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[14:37:23.351] <TB3> INFO: PixTest:: pg_setup set to default.
[14:37:23.360] <TB3> INFO: enter test to run
[14:37:23.360] <TB3> INFO: test: no parameter change
[14:37:23.635] <TB3> QUIET: Connection to board 121 closed.
[14:37:23.714] <TB3> INFO: pXar: this is the end, my friend

[14:37:59.859] <TB3> INFO: *** Welcome to pxar ***
[14:37:59.859] <TB3> INFO: *** Today: 2016/01/18
[14:37:59.918] <TB3> INFO: *** Version: b2d3
[14:37:59.918] <TB3> INFO: readRocDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//014_HREfficiency_125//dacParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//014_HREfficiency_125//dacParameters35_C15.dat
[14:37:59.918] <TB3> INFO: readTbmDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//014_HREfficiency_125//tbmParameters_C0a.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//014_HREfficiency_125//tbmParameters_C0b.dat
[14:37:59.919] <TB3> INFO: readMaskFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//014_HREfficiency_125//defaultMaskFile.dat
[14:37:59.919] <TB3> INFO: readTrimFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//014_HREfficiency_125//trimParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//014_HREfficiency_125//trimParameters35_C15.dat
[14:37:59.990] <TB3> INFO: clk: 4
[14:37:59.990] <TB3> INFO: ctr: 4
[14:37:59.990] <TB3> INFO: sda: 19
[14:37:59.990] <TB3> INFO: tin: 9
[14:37:59.990] <TB3> INFO: level: 15
[14:37:59.990] <TB3> INFO: triggerdelay: 0
[14:37:59.990] <TB3> QUIET: Instanciating API for pxar prod-12
[14:37:59.990] <TB3> INFO: Log level: INFO
[14:38:00.003] <TB3> INFO: Found DTB DTB_WWV6Z5
[14:38:00.014] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[14:38:00.017] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[14:38:00.019] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[14:38:01.565] <TB3> INFO: DUT info:
[14:38:01.565] <TB3> INFO: The DUT currently contains the following objects:
[14:38:01.565] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[14:38:01.565] <TB3> INFO: TBM Core alpha (0): 7 registers set
[14:38:01.565] <TB3> INFO: TBM Core beta (1): 7 registers set
[14:38:01.565] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[14:38:01.565] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.565] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.565] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.565] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.565] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.565] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.565] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.565] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.566] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.566] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.566] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.566] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.566] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.566] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.566] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.566] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[14:38:01.966] <TB3> INFO: enter 'restricted' command line mode
[14:38:01.966] <TB3> INFO: enter test to run
[14:38:01.966] <TB3> INFO: test: PixelAlive no parameter change
[14:38:01.966] <TB3> INFO: running: pixelalive
[14:38:01.970] <TB3> INFO: ######################################################################
[14:38:01.970] <TB3> INFO: PixTestAlive::doTest()
[14:38:01.970] <TB3> INFO: ######################################################################
[14:38:01.972] <TB3> INFO: ----------------------------------------------------------------------
[14:38:01.972] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:38:01.972] <TB3> INFO: ----------------------------------------------------------------------
[14:38:02.311] <TB3> INFO: Expecting 208000 events.
[14:38:13.065] <TB3> INFO: 208000 events read in total (10036ms).
[14:38:13.076] <TB3> INFO: Test took 11103ms.
[14:38:13.088] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:38:13.341] <TB3> INFO: PixTestAlive::aliveTest() done
[14:38:13.341] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:38:13.342] <TB3> INFO: ----------------------------------------------------------------------
[14:38:13.342] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:38:13.342] <TB3> INFO: ----------------------------------------------------------------------
[14:38:13.682] <TB3> INFO: Expecting 208000 events.
[14:38:20.859] <TB3> INFO: 208000 events read in total (6461ms).
[14:38:20.859] <TB3> INFO: Test took 7515ms.
[14:38:20.859] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:38:20.860] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[14:38:21.168] <TB3> INFO: PixTestAlive::maskTest() done
[14:38:21.168] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:38:21.169] <TB3> INFO: ----------------------------------------------------------------------
[14:38:21.169] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:38:21.169] <TB3> INFO: ----------------------------------------------------------------------
[14:38:21.474] <TB3> INFO: Expecting 208000 events.
[14:38:32.202] <TB3> INFO: 208000 events read in total (10013ms).
[14:38:32.202] <TB3> INFO: Test took 11031ms.
[14:38:32.210] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:38:32.434] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[14:38:32.434] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:38:32.435] <TB3> INFO: PixTestAlive::doTest() done, duration: 30 seconds
[14:38:32.466] <TB3> INFO: enter test to run
[14:38:32.466] <TB3> INFO: test: delay setting parameters: ->2<-
[14:38:32.466] <TB3> INFO: delay test by 2 seconds...
[14:38:34.466] <TB3> INFO: enter test to run
[14:38:34.466] <TB3> INFO: test: HighRate no parameter change
[14:38:34.466] <TB3> INFO: running: highrate
[14:38:34.467] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//014_HREfficiency_125//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//014_HREfficiency_125//phCalibrationFitErr35_C15.dat
[14:38:34.597] <TB3> INFO: ----------------------------------------------------------------------
[14:38:34.597] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[14:38:34.597] <TB3> INFO: ----------------------------------------------------------------------
[14:38:35.224] <TB3> INFO: Expecting 208000 events.
[14:38:54.714] <TB3> INFO: 208000 events read in total (18963ms).
[14:38:54.723] <TB3> INFO: Test took 20123ms.
[14:38:55.282] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:38:55.657] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:38:55.657] <TB3> INFO: number of red-efficiency pixels: 327 452 344 868 976 1494 1364 1436 1374 1544 1595 1279 840 408 461 365
[14:38:55.657] <TB3> INFO: number of X-ray hits detected: 200731 208386 185699 353824 357072 445243 426352 439457 417012 441920 459109 400287 335151 191108 214676 213250
[14:38:55.657] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[14:38:55.657] <TB3> INFO: number of Vcal hits detected: 207652 207507 207595 206985 206810 205989 206166 206181 206118 205807 205721 206281 206995 207530 207509 207615
[14:38:55.657] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.8 99.8 99.8 99.6 99.5 99.1 99.2 99.2 99.2 99.1 99.0 99.3 99.6 99.8 99.8 99.8
[14:38:55.657] <TB3> INFO: Vcal hit overall efficiency (%): 99.8 99.8 99.8 99.5 99.4 99.0 99.1 99.1 99.1 98.9 98.9 99.2 99.5 99.8 99.8 99.8
[14:38:55.657] <TB3> INFO: X-ray hit rate [MHz/cm2]: 58.8 61.1 54.4 103.7 104.7 130.5 125.0 128.8 122.2 129.5 134.6 117.3 98.2 56.0 62.9 62.5
[14:38:55.657] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[14:38:55.682] <TB3> INFO: PixTest:: pg_setup set to default.
[14:38:55.692] <TB3> INFO: enter test to run
[14:38:55.692] <TB3> INFO: test: no parameter change
[14:38:55.910] <TB3> QUIET: Connection to board 121 closed.
[14:38:55.989] <TB3> INFO: pXar: this is the end, my friend

[14:39:31.856] <TB3> INFO: *** Welcome to pxar ***
[14:39:31.856] <TB3> INFO: *** Today: 2016/01/18
[14:39:31.914] <TB3> INFO: *** Version: b2d3
[14:39:31.914] <TB3> INFO: readRocDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//015_HREfficiency_150//dacParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//015_HREfficiency_150//dacParameters35_C15.dat
[14:39:31.914] <TB3> INFO: readTbmDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//015_HREfficiency_150//tbmParameters_C0a.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//015_HREfficiency_150//tbmParameters_C0b.dat
[14:39:31.914] <TB3> INFO: readMaskFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//015_HREfficiency_150//defaultMaskFile.dat
[14:39:31.915] <TB3> INFO: readTrimFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//015_HREfficiency_150//trimParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//015_HREfficiency_150//trimParameters35_C15.dat
[14:39:32.002] <TB3> INFO: clk: 4
[14:39:32.002] <TB3> INFO: ctr: 4
[14:39:32.002] <TB3> INFO: sda: 19
[14:39:32.002] <TB3> INFO: tin: 9
[14:39:32.002] <TB3> INFO: level: 15
[14:39:32.002] <TB3> INFO: triggerdelay: 0
[14:39:32.002] <TB3> QUIET: Instanciating API for pxar prod-12
[14:39:32.002] <TB3> INFO: Log level: INFO
[14:39:32.016] <TB3> INFO: Found DTB DTB_WWV6Z5
[14:39:32.027] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[14:39:32.030] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[14:39:32.033] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[14:39:33.599] <TB3> INFO: DUT info:
[14:39:33.599] <TB3> INFO: The DUT currently contains the following objects:
[14:39:33.599] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[14:39:33.599] <TB3> INFO: TBM Core alpha (0): 7 registers set
[14:39:33.599] <TB3> INFO: TBM Core beta (1): 7 registers set
[14:39:33.599] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[14:39:33.599] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:33.599] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[14:39:34.000] <TB3> INFO: enter 'restricted' command line mode
[14:39:34.000] <TB3> INFO: enter test to run
[14:39:34.002] <TB3> INFO: test: PixelAlive no parameter change
[14:39:34.002] <TB3> INFO: running: pixelalive
[14:39:34.006] <TB3> INFO: ######################################################################
[14:39:34.006] <TB3> INFO: PixTestAlive::doTest()
[14:39:34.006] <TB3> INFO: ######################################################################
[14:39:34.008] <TB3> INFO: ----------------------------------------------------------------------
[14:39:34.008] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:39:34.008] <TB3> INFO: ----------------------------------------------------------------------
[14:39:34.342] <TB3> INFO: Expecting 208000 events.
[14:39:45.427] <TB3> INFO: 208000 events read in total (10367ms).
[14:39:45.439] <TB3> INFO: Test took 11430ms.
[14:39:45.447] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:39:45.705] <TB3> INFO: PixTestAlive::aliveTest() done
[14:39:45.705] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:39:45.707] <TB3> INFO: ----------------------------------------------------------------------
[14:39:45.707] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:39:45.707] <TB3> INFO: ----------------------------------------------------------------------
[14:39:46.011] <TB3> INFO: Expecting 208000 events.
[14:39:53.326] <TB3> INFO: 208000 events read in total (6595ms).
[14:39:53.327] <TB3> INFO: Test took 7619ms.
[14:39:53.327] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:39:53.327] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[14:39:53.637] <TB3> INFO: PixTestAlive::maskTest() done
[14:39:53.637] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:39:53.639] <TB3> INFO: ----------------------------------------------------------------------
[14:39:53.639] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:39:53.639] <TB3> INFO: ----------------------------------------------------------------------
[14:39:53.984] <TB3> INFO: Expecting 208000 events.
[14:40:05.389] <TB3> INFO: 208000 events read in total (10690ms).
[14:40:05.390] <TB3> INFO: Test took 11749ms.
[14:40:05.398] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:40:05.623] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[14:40:05.623] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:40:05.624] <TB3> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[14:40:05.661] <TB3> INFO: enter test to run
[14:40:05.661] <TB3> INFO: test: delay setting parameters: ->2<-
[14:40:05.661] <TB3> INFO: delay test by 2 seconds...
[14:40:07.661] <TB3> INFO: enter test to run
[14:40:07.661] <TB3> INFO: test: HighRate no parameter change
[14:40:07.661] <TB3> INFO: running: highrate
[14:40:07.661] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//015_HREfficiency_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//015_HREfficiency_150//phCalibrationFitErr35_C15.dat
[14:40:07.833] <TB3> INFO: ----------------------------------------------------------------------
[14:40:07.833] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[14:40:07.833] <TB3> INFO: ----------------------------------------------------------------------
[14:40:08.438] <TB3> INFO: Expecting 208000 events.
[14:40:30.353] <TB3> INFO: 208000 events read in total (21388ms).
[14:40:30.365] <TB3> INFO: Test took 22528ms.
[14:40:31.013] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:40:31.421] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:40:31.421] <TB3> INFO: number of red-efficiency pixels: 460 631 511 1286 1332 2052 1935 1962 1929 2105 2235 1739 1201 590 658 523
[14:40:31.421] <TB3> INFO: number of X-ray hits detected: 239706 249782 222098 419711 424396 526978 507339 521795 495319 525445 544435 476374 397913 229223 258045 255387
[14:40:31.421] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[14:40:31.421] <TB3> INFO: number of Vcal hits detected: 207501 207302 207392 206327 206197 204770 205016 205207 205036 204457 204240 205312 206444 207268 207269 207425
[14:40:31.421] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.8 99.7 99.8 99.3 99.2 98.6 98.7 98.7 98.7 98.5 98.4 98.9 99.3 99.7 99.7 99.7
[14:40:31.421] <TB3> INFO: Vcal hit overall efficiency (%): 99.8 99.7 99.7 99.2 99.1 98.4 98.6 98.7 98.6 98.3 98.2 98.7 99.3 99.6 99.6 99.7
[14:40:31.421] <TB3> INFO: X-ray hit rate [MHz/cm2]: 70.3 73.2 65.1 123.0 124.4 154.5 148.7 152.9 145.2 154.0 159.6 139.6 116.6 67.2 75.6 74.9
[14:40:31.421] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[14:40:31.449] <TB3> INFO: PixTest:: pg_setup set to default.
[14:40:31.464] <TB3> INFO: enter test to run
[14:40:31.464] <TB3> INFO: test: no parameter change
[14:40:31.673] <TB3> QUIET: Connection to board 121 closed.
[14:40:31.753] <TB3> INFO: pXar: this is the end, my friend

[14:41:05.685] <TB3> INFO: *** Welcome to pxar ***
[14:41:05.685] <TB3> INFO: *** Today: 2016/01/18
[14:41:05.743] <TB3> INFO: *** Version: b2d3
[14:41:05.743] <TB3> INFO: readRocDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//016_HREfficiency_200//dacParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//016_HREfficiency_200//dacParameters35_C15.dat
[14:41:05.744] <TB3> INFO: readTbmDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//016_HREfficiency_200//tbmParameters_C0a.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//016_HREfficiency_200//tbmParameters_C0b.dat
[14:41:05.744] <TB3> INFO: readMaskFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//016_HREfficiency_200//defaultMaskFile.dat
[14:41:05.744] <TB3> INFO: readTrimFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//016_HREfficiency_200//trimParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//016_HREfficiency_200//trimParameters35_C15.dat
[14:41:05.833] <TB3> INFO: clk: 4
[14:41:05.833] <TB3> INFO: ctr: 4
[14:41:05.833] <TB3> INFO: sda: 19
[14:41:05.833] <TB3> INFO: tin: 9
[14:41:05.833] <TB3> INFO: level: 15
[14:41:05.833] <TB3> INFO: triggerdelay: 0
[14:41:05.833] <TB3> QUIET: Instanciating API for pxar prod-12
[14:41:05.834] <TB3> INFO: Log level: INFO
[14:41:05.847] <TB3> INFO: Found DTB DTB_WWV6Z5
[14:41:05.858] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[14:41:05.861] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[14:41:05.866] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[14:41:07.436] <TB3> INFO: DUT info:
[14:41:07.436] <TB3> INFO: The DUT currently contains the following objects:
[14:41:07.436] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[14:41:07.437] <TB3> INFO: TBM Core alpha (0): 7 registers set
[14:41:07.437] <TB3> INFO: TBM Core beta (1): 7 registers set
[14:41:07.437] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[14:41:07.437] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.437] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[14:41:07.838] <TB3> INFO: enter 'restricted' command line mode
[14:41:07.838] <TB3> INFO: enter test to run
[14:41:07.838] <TB3> INFO: test: PixelAlive no parameter change
[14:41:07.838] <TB3> INFO: running: pixelalive
[14:41:07.843] <TB3> INFO: ######################################################################
[14:41:07.843] <TB3> INFO: PixTestAlive::doTest()
[14:41:07.843] <TB3> INFO: ######################################################################
[14:41:07.844] <TB3> INFO: ----------------------------------------------------------------------
[14:41:07.844] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:41:07.844] <TB3> INFO: ----------------------------------------------------------------------
[14:41:08.182] <TB3> INFO: Expecting 208000 events.
[14:41:19.076] <TB3> INFO: 208000 events read in total (10176ms).
[14:41:19.094] <TB3> INFO: Test took 11249ms.
[14:41:19.101] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:41:19.345] <TB3> INFO: PixTestAlive::aliveTest() done
[14:41:19.345] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:41:19.346] <TB3> INFO: ----------------------------------------------------------------------
[14:41:19.346] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:41:19.346] <TB3> INFO: ----------------------------------------------------------------------
[14:41:19.653] <TB3> INFO: Expecting 208000 events.
[14:41:26.851] <TB3> INFO: 208000 events read in total (6483ms).
[14:41:26.851] <TB3> INFO: Test took 7504ms.
[14:41:26.851] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:41:26.852] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[14:41:27.154] <TB3> INFO: PixTestAlive::maskTest() done
[14:41:27.154] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:41:27.155] <TB3> INFO: ----------------------------------------------------------------------
[14:41:27.155] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:41:27.155] <TB3> INFO: ----------------------------------------------------------------------
[14:41:27.461] <TB3> INFO: Expecting 208000 events.
[14:41:38.504] <TB3> INFO: 208000 events read in total (10327ms).
[14:41:38.505] <TB3> INFO: Test took 11348ms.
[14:41:38.513] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:41:38.738] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[14:41:38.738] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:41:38.738] <TB3> INFO: PixTestAlive::doTest() done, duration: 30 seconds
[14:41:38.776] <TB3> INFO: enter test to run
[14:41:38.776] <TB3> INFO: test: delay setting parameters: ->2<-
[14:41:38.776] <TB3> INFO: delay test by 2 seconds...
[14:41:40.776] <TB3> INFO: enter test to run
[14:41:40.776] <TB3> INFO: test: HighRate no parameter change
[14:41:40.776] <TB3> INFO: running: highrate
[14:41:40.776] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//016_HREfficiency_200//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//016_HREfficiency_200//phCalibrationFitErr35_C15.dat
[14:41:40.950] <TB3> INFO: ----------------------------------------------------------------------
[14:41:40.950] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[14:41:40.950] <TB3> INFO: ----------------------------------------------------------------------
[14:41:41.575] <TB3> INFO: Expecting 208000 events.
[14:42:08.189] <TB3> INFO: 208000 events read in total (26087ms).
[14:42:08.201] <TB3> INFO: Test took 27247ms.
[14:42:09.089] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:42:09.572] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:42:09.572] <TB3> INFO: number of red-efficiency pixels: 756 1156 878 2243 2403 3238 3065 3318 3140 3270 3384 2927 2147 942 1273 987
[14:42:09.572] <TB3> INFO: number of X-ray hits detected: 327064 341921 303627 568161 574987 708544 686924 706447 668472 706259 733100 643211 538429 314678 350303 345668
[14:42:09.572] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[14:42:09.572] <TB3> INFO: number of Vcal hits detected: 207146 206594 206643 204204 203494 200068 200687 200658 200873 199345 198937 201367 204387 206417 206407 206806
[14:42:09.572] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.6 99.4 99.5 98.4 98.1 96.6 96.9 96.6 96.8 96.3 96.1 97.2 98.5 99.4 99.3 99.5
[14:42:09.572] <TB3> INFO: Vcal hit overall efficiency (%): 99.6 99.3 99.3 98.2 97.8 96.2 96.5 96.5 96.6 95.8 95.6 96.8 98.3 99.2 99.2 99.4
[14:42:09.572] <TB3> INFO: X-ray hit rate [MHz/cm2]: 95.9 100.2 89.0 166.5 168.5 207.7 201.3 207.1 195.9 207.0 214.9 188.5 157.8 92.2 102.7 101.3
[14:42:09.572] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[14:42:09.597] <TB3> INFO: PixTest:: pg_setup set to default.
[14:42:09.609] <TB3> INFO: enter test to run
[14:42:09.609] <TB3> INFO: test: no parameter change
[14:42:09.806] <TB3> QUIET: Connection to board 121 closed.
[14:42:09.887] <TB3> INFO: pXar: this is the end, my friend

[14:42:45.871] <TB3> INFO: *** Welcome to pxar ***
[14:42:45.871] <TB3> INFO: *** Today: 2016/01/18
[14:42:45.931] <TB3> INFO: *** Version: b2d3
[14:42:45.931] <TB3> INFO: readRocDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//017_HREfficiency_250//dacParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//017_HREfficiency_250//dacParameters35_C15.dat
[14:42:45.932] <TB3> INFO: readTbmDacs: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//017_HREfficiency_250//tbmParameters_C0a.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//017_HREfficiency_250//tbmParameters_C0b.dat
[14:42:45.932] <TB3> INFO: readMaskFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//017_HREfficiency_250//defaultMaskFile.dat
[14:42:45.932] <TB3> INFO: readTrimFile: /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//017_HREfficiency_250//trimParameters35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//017_HREfficiency_250//trimParameters35_C15.dat
[14:42:46.014] <TB3> INFO: clk: 4
[14:42:46.014] <TB3> INFO: ctr: 4
[14:42:46.014] <TB3> INFO: sda: 19
[14:42:46.014] <TB3> INFO: tin: 9
[14:42:46.014] <TB3> INFO: level: 15
[14:42:46.015] <TB3> INFO: triggerdelay: 0
[14:42:46.015] <TB3> QUIET: Instanciating API for pxar prod-12
[14:42:46.015] <TB3> INFO: Log level: INFO
[14:42:46.028] <TB3> INFO: Found DTB DTB_WWV6Z5
[14:42:46.039] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[14:42:46.042] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.2
SW version: 4.5
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[14:42:46.044] <TB3> INFO: RPC call hashes of host and DTB match: 398089610
[14:42:47.613] <TB3> INFO: DUT info:
[14:42:47.613] <TB3> INFO: The DUT currently contains the following objects:
[14:42:47.613] <TB3> INFO: 2 TBM Cores tbm09c (2 ON)
[14:42:47.613] <TB3> INFO: TBM Core alpha (0): 7 registers set
[14:42:47.613] <TB3> INFO: TBM Core beta (1): 7 registers set
[14:42:47.613] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[14:42:47.613] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:47.614] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[14:42:48.014] <TB3> INFO: enter 'restricted' command line mode
[14:42:48.014] <TB3> INFO: enter test to run
[14:42:48.014] <TB3> INFO: test: PixelAlive no parameter change
[14:42:48.014] <TB3> INFO: running: pixelalive
[14:42:48.019] <TB3> INFO: ######################################################################
[14:42:48.019] <TB3> INFO: PixTestAlive::doTest()
[14:42:48.019] <TB3> INFO: ######################################################################
[14:42:48.020] <TB3> INFO: ----------------------------------------------------------------------
[14:42:48.021] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:42:48.021] <TB3> INFO: ----------------------------------------------------------------------
[14:42:48.356] <TB3> INFO: Expecting 208000 events.
[14:42:59.685] <TB3> INFO: 208000 events read in total (10611ms).
[14:42:59.704] <TB3> INFO: Test took 11682ms.
[14:42:59.712] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:42:59.957] <TB3> INFO: PixTestAlive::aliveTest() done
[14:42:59.957] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:42:59.959] <TB3> INFO: ----------------------------------------------------------------------
[14:42:59.959] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:42:59.959] <TB3> INFO: ----------------------------------------------------------------------
[14:43:00.284] <TB3> INFO: Expecting 208000 events.
[14:43:07.951] <TB3> INFO: 208000 events read in total (6952ms).
[14:43:07.953] <TB3> INFO: Test took 7993ms.
[14:43:07.953] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:43:07.953] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[14:43:08.253] <TB3> INFO: PixTestAlive::maskTest() done
[14:43:08.253] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:43:08.255] <TB3> INFO: ----------------------------------------------------------------------
[14:43:08.255] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[14:43:08.255] <TB3> INFO: ----------------------------------------------------------------------
[14:43:08.568] <TB3> INFO: Expecting 208000 events.
[14:43:19.574] <TB3> INFO: 208000 events read in total (10290ms).
[14:43:19.574] <TB3> INFO: Test took 11318ms.
[14:43:19.583] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:43:19.804] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[14:43:19.804] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:43:19.804] <TB3> INFO: PixTestAlive::doTest() done, duration: 31 seconds
[14:43:19.835] <TB3> INFO: enter test to run
[14:43:19.835] <TB3> INFO: test: delay setting parameters: ->2<-
[14:43:19.835] <TB3> INFO: delay test by 2 seconds...
[14:43:21.835] <TB3> INFO: enter test to run
[14:43:21.835] <TB3> INFO: test: HighRate no parameter change
[14:43:21.835] <TB3> INFO: running: highrate
[14:43:21.835] <TB3> INFO: readGainPedestalParameters /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//017_HREfficiency_250//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2141_XrayQualification_2016-01-18_14h11m_1453122689//017_HREfficiency_250//phCalibrationFitErr35_C15.dat
[14:43:21.978] <TB3> INFO: ----------------------------------------------------------------------
[14:43:21.978] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[14:43:21.978] <TB3> INFO: ----------------------------------------------------------------------
[14:43:22.575] <TB3> INFO: Expecting 208000 events.




















































[14:43:48.019] <TB3> INFO: 0 events read in total (24917ms).

[14:43:48.739] <TB3> INFO: Expecting 208000 events.



















































[14:44:19.572] <TB3> INFO: 208000 events read in total (30306ms).
[14:44:19.590] <TB3> INFO: Test took 31571ms.
[14:44:20.660] <TB3> INFO: Fetched DAQ statistics. Counters are being reset now.
[14:44:21.202] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[14:44:21.202] <TB3> INFO: number of red-efficiency pixels: 1219 1760 1236 3082 3187 3864 3763 3993 3880 3855 3990 3643 3001 1323 1956 1459
[14:44:21.202] <TB3> INFO: number of X-ray hits detected: 405516 422902 376463 701895 705589 870150 845484 876554 822132 864397 901971 791631 662397 388522 432026 427594
[14:44:21.202] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[14:44:21.202] <TB3> INFO: number of Vcal hits detected: 206467 205529 205449 200904 199687 193135 193952 193536 194712 192079 190761 195764 201282 205118 205106 206036
[14:44:21.202] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.3 98.9 99.0 96.9 96.4 93.5 94.0 93.4 93.9 93.2 92.5 94.7 97.2 98.9 98.7 99.1
[14:44:21.202] <TB3> INFO: Vcal hit overall efficiency (%): 99.3 98.8 98.8 96.6 96.0 92.9 93.2 93.0 93.6 92.3 91.7 94.1 96.8 98.6 98.6 99.1
[14:44:21.202] <TB3> INFO: X-ray hit rate [MHz/cm2]: 118.9 124.0 110.3 205.7 206.8 255.0 247.8 256.9 241.0 253.4 264.4 232.0 194.2 113.9 126.6 125.3
[14:44:21.202] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[14:44:21.228] <TB3> INFO: PixTest:: pg_setup set to default.
[14:44:21.239] <TB3> INFO: enter test to run
[14:44:21.239] <TB3> INFO: test: no parameter change
[14:44:21.487] <TB3> QUIET: Connection to board 121 closed.
[14:44:21.568] <TB3> INFO: pXar: this is the end, my friend