[15:09:11.330] <TB1> INFO: *** Welcome to pxar ***
[15:09:11.330] <TB1> INFO: *** Today: 2015/09/04
[15:09:11.330] <TB1> INFO: readRocDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//000_PixelAlive_p17//dacParameters35_C15.dat
[15:09:11.331] <TB1> INFO: readTbmDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//000_PixelAlive_p17//tbmParameters_C0b.dat
[15:09:11.331] <TB1> INFO: readMaskFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//000_PixelAlive_p17//defaultMaskFile.dat
[15:09:11.331] <TB1> INFO: readTrimFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//000_PixelAlive_p17//trimParameters35_C15.dat
[15:09:11.406] <TB1> INFO: clk: 4
[15:09:11.406] <TB1> INFO: ctr: 4
[15:09:11.406] <TB1> INFO: sda: 19
[15:09:11.406] <TB1> INFO: tin: 9
[15:09:11.406] <TB1> INFO: level: 15
[15:09:11.406] <TB1> INFO: triggerdelay: 0
[15:09:11.407] <TB1> QUIET: Instanciating API for pxar prod-10
[15:09:11.407] <TB1> INFO: Log level: INFO
[15:09:11.420] <TB1> INFO: Found DTB DTB_WWXTQT
[15:09:11.435] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[15:09:11.438] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[15:09:11.440] <TB1> INFO: RPC call hashes of host and DTB match: 397073690
[15:09:12.977] <TB1> INFO: DUT info:
[15:09:12.977] <TB1> INFO: The DUT currently contains the following objects:
[15:09:12.977] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[15:09:12.977] <TB1> INFO: TBM Core alpha (0): 7 registers set
[15:09:12.977] <TB1> INFO: TBM Core beta (1): 7 registers set
[15:09:12.977] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[15:09:12.977] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:12.977] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[15:09:13.378] <TB1> INFO: enter 'restricted' command line mode
[15:09:13.378] <TB1> INFO: enter test to run
[15:09:13.379] <TB1> INFO: test: PixelAlive no parameter change
[15:09:13.379] <TB1> INFO: running: pixelalive
[15:09:13.385] <TB1> INFO: ######################################################################
[15:09:13.385] <TB1> INFO: PixTestAlive::doTest()
[15:09:13.385] <TB1> INFO: ######################################################################
[15:09:13.386] <TB1> INFO: ----------------------------------------------------------------------
[15:09:13.386] <TB1> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[15:09:13.386] <TB1> INFO: ----------------------------------------------------------------------
[15:09:13.696] <TB1> INFO: Expecting 41600 events.
[15:09:18.311] <TB1> INFO: 41600 events read in total (3896ms).
[15:09:18.389] <TB1> INFO: Test took 5001ms.
[15:09:18.399] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[15:09:18.682] <TB1> INFO: PixTestAlive::aliveTest() done
[15:09:18.682] <TB1> INFO: number of dead pixels (per ROC): 0 2 0 1 0 0 0 0 0 0 0 1 0 0 0 0
[15:09:18.684] <TB1> INFO: ----------------------------------------------------------------------
[15:09:18.684] <TB1> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[15:09:18.684] <TB1> INFO: ----------------------------------------------------------------------
[15:09:18.995] <TB1> INFO: Expecting 41600 events.
[15:09:22.182] <TB1> INFO: 41600 events read in total (2471ms).
[15:09:22.183] <TB1> INFO: Test took 3497ms.
[15:09:22.183] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[15:09:22.184] <TB1> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[15:09:22.497] <TB1> INFO: PixTestAlive::maskTest() done
[15:09:22.497] <TB1> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[15:09:22.499] <TB1> INFO: ----------------------------------------------------------------------
[15:09:22.499] <TB1> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[15:09:22.499] <TB1> INFO: ----------------------------------------------------------------------
[15:09:22.801] <TB1> INFO: Expecting 41600 events.
[15:09:27.221] <TB1> INFO: 41600 events read in total (3704ms).
[15:09:27.222] <TB1> INFO: Test took 4722ms.
[15:09:27.228] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[15:09:27.527] <TB1> INFO: PixTestAlive::addressDecodingTest() done
[15:09:27.527] <TB1> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[15:09:27.527] <TB1> INFO: PixTestAlive::doTest() done, duration: 14 seconds
[15:09:27.568] <TB1> INFO: enter test to run
[15:09:27.568] <TB1> INFO: test: no parameter change
[15:09:27.719] <TB1> QUIET: Connection to board 147 closed.
[15:09:27.798] <TB1> INFO: pXar: this is the end, my friend

[15:14:49.843] <TB1> INFO: *** Welcome to pxar ***
[15:14:49.843] <TB1> INFO: *** Today: 2015/09/04
[15:14:49.843] <TB1> INFO: readRocDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//dacParameters35_C15.dat
[15:14:49.844] <TB1> INFO: readTbmDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[15:14:49.844] <TB1> INFO: readMaskFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//defaultMaskFile.dat
[15:14:49.844] <TB1> INFO: readTrimFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C15.dat
[15:14:49.916] <TB1> INFO: clk: 4
[15:14:49.916] <TB1> INFO: ctr: 4
[15:14:49.916] <TB1> INFO: sda: 19
[15:14:49.916] <TB1> INFO: tin: 9
[15:14:49.916] <TB1> INFO: level: 15
[15:14:49.916] <TB1> INFO: triggerdelay: 0
[15:14:49.916] <TB1> QUIET: Instanciating API for pxar prod-10
[15:14:49.916] <TB1> INFO: Log level: INFO
[15:14:49.929] <TB1> INFO: Found DTB DTB_WWXTQT
[15:14:49.944] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[15:14:49.947] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[15:14:49.950] <TB1> INFO: RPC call hashes of host and DTB match: 397073690
[15:14:51.468] <TB1> INFO: DUT info:
[15:14:51.468] <TB1> INFO: The DUT currently contains the following objects:
[15:14:51.468] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[15:14:51.468] <TB1> INFO: TBM Core alpha (0): 7 registers set
[15:14:51.468] <TB1> INFO: TBM Core beta (1): 7 registers set
[15:14:51.468] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[15:14:51.468] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.468] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[15:14:51.869] <TB1> INFO: enter 'restricted' command line mode
[15:14:51.869] <TB1> INFO: enter test to run
[15:14:51.870] <TB1> INFO: test: delay setting parameters: ->5<-
[15:14:51.870] <TB1> INFO: delay test by 5 seconds...
[15:14:56.870] <TB1> INFO: enter test to run
[15:14:56.870] <TB1> INFO: test: highrate no parameter change
[15:14:56.870] <TB1> INFO: running: highrate
[15:14:56.870] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[15:14:57.019] <TB1> INFO: ----------------------------------------------------------------------
[15:14:57.019] <TB1> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[15:14:57.019] <TB1> INFO: ----------------------------------------------------------------------
[15:14:57.019] <TB1> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[15:14:57.019] <TB1> INFO: edge/corner pixel THR is adjusted
[15:14:57.019] <TB1> INFO: PixTestHighRate::trimHotPixels: step 0...
[15:14:57.980] <TB1> INFO: Collecting data for 1 seconds...
[15:14:58.982] <TB1> INFO: Done with hot pixel readout
[15:15:07.336] <TB1> INFO: PixTest:: pg_setup set to default.
[15:15:07.336] <TB1> INFO: 1 hot pixels found in step 0
[15:15:08.303] <TB1> INFO: Collecting data for 1 seconds...
[15:15:09.304] <TB1> INFO: Done with hot pixel readout
[15:15:17.324] <TB1> INFO: PixTest:: pg_setup set to default.
[15:15:17.325] <TB1> INFO: 1 hot pixels found in step 1
[15:15:18.291] <TB1> INFO: Collecting data for 1 seconds...
[15:15:19.293] <TB1> INFO: Done with hot pixel readout
[15:15:27.627] <TB1> INFO: PixTest:: pg_setup set to default.
[15:15:27.628] <TB1> INFO: 1 hot pixels found in step 2
[15:15:28.595] <TB1> INFO: Collecting data for 1 seconds...
[15:15:29.596] <TB1> INFO: Done with hot pixel readout
[15:15:35.713] <TB1> INFO: PixTest:: pg_setup set to default.
[15:15:35.714] <TB1> INFO: 1 hot pixels found in step 3
[15:15:36.682] <TB1> INFO: Collecting data for 1 seconds...
[15:15:37.683] <TB1> INFO: Done with hot pixel readout
[15:15:43.031] <TB1> INFO: PixTest:: pg_setup set to default.
[15:15:43.032] <TB1> INFO: 1 hot pixels found in step 4
[15:15:43.997] <TB1> INFO: Collecting data for 1 seconds...
[15:15:44.998] <TB1> INFO: Done with hot pixel readout
[15:15:50.336] <TB1> INFO: PixTest:: pg_setup set to default.
[15:15:50.336] <TB1> INFO: 0 hot pixels found in step 5
[15:15:50.346] <TB1> INFO: 0 hot pixels could not be trimmed and have been masked.
[15:15:50.373] <TB1> INFO: PixTest::trimHotPixels() done
[15:15:50.373] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C0.dat
[15:15:50.379] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C1.dat
[15:15:50.401] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C2.dat
[15:15:50.407] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C3.dat
[15:15:50.412] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C4.dat
[15:15:50.418] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C5.dat
[15:15:50.424] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C6.dat
[15:15:50.429] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C7.dat
[15:15:50.435] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C8.dat
[15:15:50.441] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C9.dat
[15:15:50.446] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C10.dat
[15:15:50.452] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C11.dat
[15:15:50.458] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C12.dat
[15:15:50.463] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C13.dat
[15:15:50.469] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C14.dat
[15:15:50.474] <TB1> INFO: write trim parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//trimParameters35_C15.dat
[15:15:50.480] <TB1> INFO: write masked pixels into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//002_RetrimHotPixels_150//defaultMaskFile.dat
[15:15:50.512] <TB1> INFO: enter test to run
[15:15:50.512] <TB1> INFO: test: no parameter change
[15:15:50.658] <TB1> QUIET: Connection to board 147 closed.
[15:15:50.738] <TB1> INFO: pXar: this is the end, my friend

[15:16:06.820] <TB1> INFO: *** Welcome to pxar ***
[15:16:06.820] <TB1> INFO: *** Today: 2015/09/04
[15:16:06.820] <TB1> INFO: readRocDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//003_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//003_HRData_50//dacParameters35_C15.dat
[15:16:06.821] <TB1> INFO: readTbmDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//003_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//003_HRData_50//tbmParameters_C0b.dat
[15:16:06.821] <TB1> INFO: readMaskFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//003_HRData_50//defaultMaskFile.dat
[15:16:06.821] <TB1> INFO: readTrimFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//003_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//003_HRData_50//trimParameters35_C15.dat
[15:16:06.894] <TB1> INFO: clk: 4
[15:16:06.894] <TB1> INFO: ctr: 4
[15:16:06.894] <TB1> INFO: sda: 19
[15:16:06.894] <TB1> INFO: tin: 9
[15:16:06.894] <TB1> INFO: level: 15
[15:16:06.894] <TB1> INFO: triggerdelay: 0
[15:16:06.894] <TB1> QUIET: Instanciating API for pxar prod-10
[15:16:06.894] <TB1> INFO: Log level: INFO
[15:16:06.908] <TB1> INFO: Found DTB DTB_WWXTQT
[15:16:06.923] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[15:16:06.926] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[15:16:06.929] <TB1> INFO: RPC call hashes of host and DTB match: 397073690
[15:16:08.459] <TB1> INFO: DUT info:
[15:16:08.459] <TB1> INFO: The DUT currently contains the following objects:
[15:16:08.459] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[15:16:08.459] <TB1> INFO: TBM Core alpha (0): 7 registers set
[15:16:08.459] <TB1> INFO: TBM Core beta (1): 7 registers set
[15:16:08.459] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[15:16:08.459] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.459] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[15:16:08.861] <TB1> INFO: enter 'restricted' command line mode
[15:16:08.861] <TB1> INFO: enter test to run
[15:16:08.861] <TB1> INFO: test: delay setting parameters: ->5<-
[15:16:08.861] <TB1> INFO: delay test by 5 seconds...
[15:16:13.861] <TB1> INFO: enter test to run
[15:16:13.861] <TB1> INFO: test: Xray no parameter change
[15:16:13.861] <TB1> INFO: running: xray
[15:16:13.862] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//003_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//003_HRData_50//phCalibrationFitErr35_C15.dat
[15:16:14.002] <TB1> INFO: ######################################################################
[15:16:14.002] <TB1> INFO: PixTestXray::doTest()
[15:16:14.002] <TB1> INFO: ######################################################################
[15:16:14.002] <TB1> INFO: ----------------------------------------------------------------------
[15:16:14.002] <TB1> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[15:16:14.002] <TB1> INFO: ----------------------------------------------------------------------
[15:16:14.972] <TB1> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[15:16:20.865] <TB1> INFO: run duration 5 seconds, buffer almost full (81%), pausing triggers.
[15:16:48.957] <TB1> INFO: Resuming triggers.
[15:16:54.850] <TB1> INFO: run duration 11 seconds, buffer almost full (81%), pausing triggers.
[15:17:21.894] <TB1> INFO: Resuming triggers.
[15:17:27.790] <TB1> INFO: run duration 17 seconds, buffer almost full (81%), pausing triggers.
[15:17:55.184] <TB1> INFO: Resuming triggers.
[15:18:01.081] <TB1> INFO: run duration 23 seconds, buffer almost full (81%), pausing triggers.
[15:18:27.279] <TB1> INFO: Resuming triggers.
[15:18:33.172] <TB1> INFO: run duration 29 seconds, buffer almost full (81%), pausing triggers.
[15:19:02.846] <TB1> INFO: Resuming triggers.
[15:19:08.743] <TB1> INFO: run duration 35 seconds, buffer almost full (81%), pausing triggers.
[15:19:37.416] <TB1> INFO: Resuming triggers.
[15:19:43.311] <TB1> INFO: run duration 41 seconds, buffer almost full (81%), pausing triggers.
[15:20:12.103] <TB1> INFO: Resuming triggers.
[15:20:17.996] <TB1> INFO: run duration 47 seconds, buffer almost full (81%), pausing triggers.
[15:20:48.264] <TB1> INFO: Resuming triggers.
[15:20:54.155] <TB1> INFO: run duration 52 seconds, buffer almost full (81%), pausing triggers.
[15:21:25.415] <TB1> INFO: Resuming triggers.
[15:21:31.313] <TB1> INFO: run duration 58 seconds, buffer almost full (81%), pausing triggers.
[15:22:01.835] <TB1> INFO: Resuming triggers.
[15:22:07.728] <TB1> INFO: run duration 64 seconds, buffer almost full (81%), pausing triggers.
[15:22:39.092] <TB1> INFO: Resuming triggers.
[15:22:44.985] <TB1> INFO: run duration 70 seconds, buffer almost full (81%), pausing triggers.
[15:23:15.099] <TB1> INFO: Resuming triggers.
[15:23:20.996] <TB1> INFO: run duration 76 seconds, buffer almost full (81%), pausing triggers.
[15:23:49.742] <TB1> INFO: Resuming triggers.
[15:23:55.638] <TB1> INFO: run duration 82 seconds, buffer almost full (81%), pausing triggers.
[15:24:25.438] <TB1> INFO: Resuming triggers.
[15:24:31.334] <TB1> INFO: run duration 88 seconds, buffer almost full (81%), pausing triggers.
[15:25:00.112] <TB1> INFO: Resuming triggers.
[15:25:06.003] <TB1> INFO: run duration 94 seconds, buffer almost full (81%), pausing triggers.
[15:25:24.787] <TB1> INFO: Resuming triggers.
[15:25:30.622] <TB1> INFO: data taking finished, elapsed time: 100 seconds.
[15:25:49.040] <TB1> INFO: PixTest:: pg_setup set to default.
[15:25:49.042] <TB1> INFO: PixTestXray::doPhRun() done
[15:25:49.042] <TB1> INFO: PixTestXray::doTest() done
[15:25:49.216] <TB1> INFO: enter test to run
[15:25:49.216] <TB1> INFO: test: no parameter change
[15:25:49.412] <TB1> QUIET: Connection to board 147 closed.
[15:25:49.492] <TB1> INFO: pXar: this is the end, my friend

[15:26:05.598] <TB1> INFO: *** Welcome to pxar ***
[15:26:05.598] <TB1> INFO: *** Today: 2015/09/04
[15:26:05.598] <TB1> INFO: readRocDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//004_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//004_HRData_150//dacParameters35_C15.dat
[15:26:05.598] <TB1> INFO: readTbmDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//004_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//004_HRData_150//tbmParameters_C0b.dat
[15:26:05.598] <TB1> INFO: readMaskFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//004_HRData_150//defaultMaskFile.dat
[15:26:05.598] <TB1> INFO: readTrimFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//004_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//004_HRData_150//trimParameters35_C15.dat
[15:26:05.667] <TB1> INFO: clk: 4
[15:26:05.667] <TB1> INFO: ctr: 4
[15:26:05.667] <TB1> INFO: sda: 19
[15:26:05.667] <TB1> INFO: tin: 9
[15:26:05.667] <TB1> INFO: level: 15
[15:26:05.667] <TB1> INFO: triggerdelay: 0
[15:26:05.667] <TB1> QUIET: Instanciating API for pxar prod-10
[15:26:05.667] <TB1> INFO: Log level: INFO
[15:26:05.681] <TB1> INFO: Found DTB DTB_WWXTQT
[15:26:05.696] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[15:26:05.700] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[15:26:05.702] <TB1> INFO: RPC call hashes of host and DTB match: 397073690
[15:26:07.249] <TB1> INFO: DUT info:
[15:26:07.249] <TB1> INFO: The DUT currently contains the following objects:
[15:26:07.249] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[15:26:07.249] <TB1> INFO: TBM Core alpha (0): 7 registers set
[15:26:07.249] <TB1> INFO: TBM Core beta (1): 7 registers set
[15:26:07.249] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[15:26:07.249] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.249] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.249] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.249] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.249] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.249] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.250] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.250] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.250] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.250] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.250] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.250] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.250] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.250] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.250] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.250] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[15:26:07.651] <TB1> INFO: enter 'restricted' command line mode
[15:26:07.651] <TB1> INFO: enter test to run
[15:26:07.651] <TB1> INFO: test: delay setting parameters: ->5<-
[15:26:07.651] <TB1> INFO: delay test by 5 seconds...
[15:26:12.651] <TB1> INFO: enter test to run
[15:26:12.651] <TB1> INFO: test: Xray no parameter change
[15:26:12.651] <TB1> INFO: running: xray
[15:26:12.652] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//004_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//004_HRData_150//phCalibrationFitErr35_C15.dat
[15:26:12.813] <TB1> INFO: ######################################################################
[15:26:12.813] <TB1> INFO: PixTestXray::doTest()
[15:26:12.813] <TB1> INFO: ######################################################################
[15:26:12.813] <TB1> INFO: ----------------------------------------------------------------------
[15:26:12.813] <TB1> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[15:26:12.813] <TB1> INFO: ----------------------------------------------------------------------
[15:26:13.784] <TB1> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[15:26:16.856] <TB1> INFO: run duration 3 seconds, buffer almost full (81%), pausing triggers.
[15:26:45.208] <TB1> INFO: Resuming triggers.
[15:26:48.291] <TB1> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[15:27:16.490] <TB1> INFO: Resuming triggers.
[15:27:19.576] <TB1> INFO: run duration 9 seconds, buffer almost full (81%), pausing triggers.
[15:27:47.602] <TB1> INFO: Resuming triggers.
[15:27:50.686] <TB1> INFO: run duration 12 seconds, buffer almost full (81%), pausing triggers.
[15:28:19.935] <TB1> INFO: Resuming triggers.
[15:28:23.020] <TB1> INFO: run duration 15 seconds, buffer almost full (81%), pausing triggers.
[15:28:52.991] <TB1> INFO: Resuming triggers.
[15:28:56.076] <TB1> INFO: run duration 18 seconds, buffer almost full (81%), pausing triggers.
[15:29:25.906] <TB1> INFO: Resuming triggers.
[15:29:28.990] <TB1> INFO: run duration 21 seconds, buffer almost full (81%), pausing triggers.
[15:29:58.036] <TB1> INFO: Resuming triggers.
[15:30:01.118] <TB1> INFO: run duration 24 seconds, buffer almost full (81%), pausing triggers.
[15:30:32.007] <TB1> INFO: Resuming triggers.
[15:30:35.099] <TB1> INFO: run duration 27 seconds, buffer almost full (81%), pausing triggers.
[15:31:06.402] <TB1> INFO: Resuming triggers.
[15:31:09.488] <TB1> INFO: run duration 30 seconds, buffer almost full (81%), pausing triggers.
[15:31:39.531] <TB1> INFO: Resuming triggers.
[15:31:42.611] <TB1> INFO: run duration 33 seconds, buffer almost full (81%), pausing triggers.
[15:32:13.725] <TB1> INFO: Resuming triggers.
[15:32:16.808] <TB1> INFO: run duration 36 seconds, buffer almost full (81%), pausing triggers.
[15:32:49.496] <TB1> INFO: Resuming triggers.
[15:32:52.581] <TB1> INFO: run duration 40 seconds, buffer almost full (81%), pausing triggers.
[15:33:23.192] <TB1> INFO: Resuming triggers.
[15:33:26.276] <TB1> INFO: run duration 43 seconds, buffer almost full (81%), pausing triggers.
[15:33:57.353] <TB1> INFO: Resuming triggers.
[15:34:00.434] <TB1> INFO: run duration 46 seconds, buffer almost full (81%), pausing triggers.
[15:34:32.026] <TB1> INFO: Resuming triggers.
[15:34:35.107] <TB1> INFO: run duration 49 seconds, buffer almost full (81%), pausing triggers.
[15:35:06.635] <TB1> INFO: Resuming triggers.
[15:35:09.714] <TB1> INFO: run duration 52 seconds, buffer almost full (81%), pausing triggers.
[15:35:39.373] <TB1> INFO: Resuming triggers.
[15:35:42.450] <TB1> INFO: run duration 55 seconds, buffer almost full (81%), pausing triggers.
[15:36:12.714] <TB1> INFO: Resuming triggers.
[15:36:15.790] <TB1> INFO: run duration 58 seconds, buffer almost full (81%), pausing triggers.
[15:36:45.220] <TB1> INFO: Resuming triggers.
[15:36:48.299] <TB1> INFO: run duration 61 seconds, buffer almost full (81%), pausing triggers.
[15:37:20.289] <TB1> INFO: Resuming triggers.
[15:37:23.369] <TB1> INFO: run duration 64 seconds, buffer almost full (81%), pausing triggers.
[15:37:54.752] <TB1> INFO: Resuming triggers.
[15:37:57.832] <TB1> INFO: run duration 67 seconds, buffer almost full (81%), pausing triggers.
[15:38:29.647] <TB1> INFO: Resuming triggers.
[15:38:32.724] <TB1> INFO: run duration 70 seconds, buffer almost full (81%), pausing triggers.
[15:39:05.598] <TB1> INFO: Resuming triggers.
[15:39:08.676] <TB1> INFO: run duration 73 seconds, buffer almost full (81%), pausing triggers.
[15:39:41.097] <TB1> INFO: Resuming triggers.
[15:39:44.173] <TB1> INFO: run duration 76 seconds, buffer almost full (81%), pausing triggers.
[15:40:15.095] <TB1> INFO: Resuming triggers.
[15:40:18.170] <TB1> INFO: run duration 80 seconds, buffer almost full (81%), pausing triggers.
[15:40:48.793] <TB1> INFO: Resuming triggers.
[15:40:51.868] <TB1> INFO: run duration 83 seconds, buffer almost full (81%), pausing triggers.
[15:41:23.183] <TB1> INFO: Resuming triggers.
[15:41:26.257] <TB1> INFO: run duration 86 seconds, buffer almost full (81%), pausing triggers.


[15:41:53.365] <TB1> INFO: Resuming triggers.
[15:41:56.437] <TB1> INFO: run duration 89 seconds, buffer almost full (81%), pausing triggers.
[15:42:16.450] <TB1> INFO: Resuming triggers.
[15:42:19.522] <TB1> INFO: run duration 92 seconds, buffer almost full (81%), pausing triggers.
[15:42:39.702] <TB1> INFO: Resuming triggers.
[15:42:42.778] <TB1> INFO: run duration 95 seconds, buffer almost full (81%), pausing triggers.
[15:43:02.848] <TB1> INFO: Resuming triggers.
[15:43:05.918] <TB1> INFO: run duration 98 seconds, buffer almost full (81%), pausing triggers.
[15:43:26.013] <TB1> INFO: Resuming triggers.
[15:43:27.579] <TB1> INFO: data taking finished, elapsed time: 100 seconds.
[15:43:38.303] <TB1> INFO: PixTest:: pg_setup set to default.
[15:43:38.304] <TB1> INFO: PixTestXray::doPhRun() done
[15:43:38.304] <TB1> INFO: PixTestXray::doTest() done
[15:43:38.488] <TB1> INFO: enter test to run
[15:43:38.488] <TB1> INFO: test: no parameter change
[15:43:38.697] <TB1> QUIET: Connection to board 147 closed.
[15:43:38.778] <TB1> INFO: pXar: this is the end, my friend

[15:43:55.375] <TB1> INFO: *** Welcome to pxar ***
[15:43:55.375] <TB1> INFO: *** Today: 2015/09/04
[15:43:55.375] <TB1> INFO: readRocDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//005_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//005_HRSCurves_100//dacParameters35_C15.dat
[15:43:55.376] <TB1> INFO: readTbmDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//005_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//005_HRSCurves_100//tbmParameters_C0b.dat
[15:43:55.376] <TB1> INFO: readMaskFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//005_HRSCurves_100//defaultMaskFile.dat
[15:43:55.376] <TB1> INFO: readTrimFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//005_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//005_HRSCurves_100//trimParameters35_C15.dat
[15:43:55.480] <TB1> INFO: clk: 4
[15:43:55.480] <TB1> INFO: ctr: 4
[15:43:55.480] <TB1> INFO: sda: 19
[15:43:55.480] <TB1> INFO: tin: 9
[15:43:55.480] <TB1> INFO: level: 15
[15:43:55.480] <TB1> INFO: triggerdelay: 0
[15:43:55.480] <TB1> QUIET: Instanciating API for pxar prod-10
[15:43:55.480] <TB1> INFO: Log level: INFO
[15:43:55.495] <TB1> INFO: Found DTB DTB_WWXTQT
[15:43:55.509] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[15:43:55.513] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[15:43:55.515] <TB1> INFO: RPC call hashes of host and DTB match: 397073690
[15:43:57.038] <TB1> INFO: DUT info:
[15:43:57.038] <TB1> INFO: The DUT currently contains the following objects:
[15:43:57.038] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[15:43:57.038] <TB1> INFO: TBM Core alpha (0): 7 registers set
[15:43:57.038] <TB1> INFO: TBM Core beta (1): 7 registers set
[15:43:57.038] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[15:43:57.038] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.038] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[15:43:57.439] <TB1> INFO: enter 'restricted' command line mode
[15:43:57.439] <TB1> INFO: enter test to run
[15:43:57.440] <TB1> INFO: test: Highrate no parameter change
[15:43:57.440] <TB1> INFO: running: highrate
[15:43:57.440] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//005_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//005_HRSCurves_100//phCalibrationFitErr35_C15.dat
[15:43:57.621] <TB1> INFO: ----------------------------------------------------------------------
[15:43:57.621] <TB1> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[15:43:57.621] <TB1> INFO: ----------------------------------------------------------------------
[15:43:57.627] <TB1> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 15 .. 75 (20/-1) hits flags = 384 (plus default)
[15:43:57.639] <TB1> INFO: dacScan step from 15 .. 34
[15:43:57.639] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[15:43:57.639] <TB1> INFO: run 1 of 1
[15:43:58.234] <TB1> INFO: Expecting 4160000 events.
[15:44:30.148] <TB1> INFO: 402200 events read in total (31384ms).
[15:45:01.917] <TB1> INFO: 806200 events read in total (63153ms).
[15:45:33.526] <TB1> INFO: 1210100 events read in total (94762ms).
[15:46:04.930] <TB1> INFO: 1614100 events read in total (126166ms).
[15:46:36.642] <TB1> INFO: 2017700 events read in total (157878ms).
[15:47:07.902] <TB1> INFO: 2421400 events read in total (189138ms).
[15:47:38.228] <TB1> INFO: 2824800 events read in total (219464ms).
[15:48:10.143] <TB1> INFO: 3228300 events read in total (251379ms).
[15:48:41.837] <TB1> INFO: 3631400 events read in total (283080ms).
[15:49:10.183] <TB1> INFO: 4034500 events read in total (311419ms).
[15:49:20.932] <TB1> INFO: 4160000 events read in total (322168ms).
[15:49:21.151] <TB1> INFO: Test took 323512ms.
[15:49:23.182] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[15:49:29.482] <TB1> INFO: dacScan step from 35 .. 54
[15:49:29.482] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[15:49:29.507] <TB1> INFO: run 1 of 1
[15:49:30.201] <TB1> INFO: Expecting 4160000 events.
[15:50:01.378] <TB1> INFO: 349800 events read in total (30632ms).
[15:50:32.517] <TB1> INFO: 700350 events read in total (61771ms).
[15:51:03.408] <TB1> INFO: 1050100 events read in total (92662ms).
[15:51:35.402] <TB1> INFO: 1399300 events read in total (124656ms).
[15:52:07.159] <TB1> INFO: 1747350 events read in total (156413ms).
[15:52:40.104] <TB1> INFO: 2093550 events read in total (189358ms).
[15:53:12.839] <TB1> INFO: 2437950 events read in total (222093ms).
[15:53:45.323] <TB1> INFO: 2779850 events read in total (254577ms).


[15:54:16.771] <TB1> INFO: 3119700 events read in total (286025ms).
[15:54:49.430] <TB1> INFO: 3456950 events read in total (318684ms).
[15:55:19.904] <TB1> INFO: 3793000 events read in total (349158ms).
[15:55:51.648] <TB1> INFO: 4128850 events read in total (380902ms).
[15:55:54.266] <TB1> INFO: 4160000 events read in total (383520ms).
[15:55:54.506] <TB1> INFO: Test took 384911ms.
[15:55:56.548] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[15:56:02.715] <TB1> INFO: dacScan step from 55 .. 74
[15:56:02.715] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[15:56:02.715] <TB1> INFO: run 1 of 1
[15:56:03.310] <TB1> INFO: Expecting 4160000 events.
[15:56:33.630] <TB1> INFO: 307350 events read in total (29792ms).
[15:57:04.033] <TB1> INFO: 615450 events read in total (60195ms).
[15:57:33.720] <TB1> INFO: 923350 events read in total (89882ms).
[15:58:03.737] <TB1> INFO: 1231250 events read in total (119899ms).
[15:58:33.328] <TB1> INFO: 1539250 events read in total (149490ms).
[15:59:02.741] <TB1> INFO: 1847250 events read in total (178903ms).
[15:59:31.311] <TB1> INFO: 2155400 events read in total (207473ms).
[15:59:59.925] <TB1> INFO: 2463100 events read in total (236087ms).
[16:00:29.077] <TB1> INFO: 2771000 events read in total (265239ms).
[16:00:58.177] <TB1> INFO: 3078700 events read in total (294339ms).
[16:01:25.749] <TB1> INFO: 3386450 events read in total (321911ms).
[16:01:48.727] <TB1> INFO: 3694350 events read in total (344889ms).
[16:02:10.804] <TB1> INFO: 4002100 events read in total (366966ms).
[16:02:22.242] <TB1> INFO: 4160000 events read in total (378404ms).
[16:02:22.470] <TB1> INFO: Test took 379755ms.
[16:02:24.363] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:02:29.954] <TB1> INFO: dacScan step from 75 .. 75
[16:02:29.954] <TB1> INFO: dacScan split into 1 runs with ntrig = 50
[16:02:29.954] <TB1> INFO: run 1 of 1
[16:02:30.543] <TB1> INFO: Expecting 208000 events.
[16:02:46.841] <TB1> INFO: 208000 events read in total (15771ms).
[16:02:46.849] <TB1> INFO: Test took 16895ms.
[16:02:46.944] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:02:47.256] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:48.591] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:49.599] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:50.604] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:51.655] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:52.713] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:53.793] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:54.876] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:55.969] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:57.053] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:58.122] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:02:59.219] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:03:00.280] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:03:01.321] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:03:02.325] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:03:03.333] <TB1> INFO: dumping ASCII scurve output file: XSCurveData
[16:03:04.369] <TB1> INFO: PixTest:: pg_setup set to default.
[16:03:04.371] <TB1> INFO: vcal mean: 39.15 40.56 39.46 41.65 42.79 45.13 43.74 44.23 43.20 43.64 44.32 43.40 42.52 40.23 39.43 39.33
[16:03:04.371] <TB1> INFO: vcal RMS: 1.13 1.47 0.97 1.51 1.19 1.46 1.50 1.45 1.45 1.56 1.57 1.70 1.31 1.28 1.06 1.06
[16:03:04.371] <TB1> INFO: number of X-ray hits detected: 227002 265965 224305 339024 412249 514033 435627 485753 461315 468271 479832 396101 377564 228751 238649 215165
[16:03:04.371] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:03:04.371] <TB1> INFO: X-ray hit rate [MHz/cm2]: 66.5 78.0 65.7 99.4 120.8 150.7 127.7 142.4 135.2 137.3 140.6 116.1 110.7 67.0 69.9 63.1
[16:03:04.371] <TB1> INFO: PixTestHighRate::doXNoiseMaps() done
[16:03:04.491] <TB1> INFO: enter test to run
[16:03:04.491] <TB1> INFO: test: no parameter change
[16:03:04.697] <TB1> QUIET: Connection to board 147 closed.
[16:03:04.777] <TB1> INFO: pXar: this is the end, my friend

[16:20:55.706] <TB1> INFO: *** Welcome to pxar ***
[16:20:55.706] <TB1> INFO: *** Today: 2015/09/04
[16:20:55.706] <TB1> INFO: readRocDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[16:20:55.707] <TB1> INFO: readTbmDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[16:20:55.707] <TB1> INFO: readMaskFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[16:20:55.707] <TB1> INFO: readTrimFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[16:20:55.793] <TB1> INFO: clk: 4
[16:20:55.793] <TB1> INFO: ctr: 4
[16:20:55.793] <TB1> INFO: sda: 19
[16:20:55.793] <TB1> INFO: tin: 9
[16:20:55.793] <TB1> INFO: level: 15
[16:20:55.793] <TB1> INFO: triggerdelay: 0
[16:20:55.793] <TB1> QUIET: Instanciating API for pxar prod-10
[16:20:55.793] <TB1> INFO: Log level: INFO
[16:20:55.807] <TB1> INFO: Found DTB DTB_WWXTQT
[16:20:55.822] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[16:20:55.825] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[16:20:55.828] <TB1> INFO: RPC call hashes of host and DTB match: 397073690
[16:20:57.349] <TB1> INFO: DUT info:
[16:20:57.349] <TB1> INFO: The DUT currently contains the following objects:
[16:20:57.349] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[16:20:57.349] <TB1> INFO: TBM Core alpha (0): 7 registers set
[16:20:57.349] <TB1> INFO: TBM Core beta (1): 7 registers set
[16:20:57.349] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:20:57.349] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.349] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:20:57.751] <TB1> INFO: enter 'restricted' command line mode
[16:20:57.751] <TB1> INFO: enter test to run
[16:20:57.751] <TB1> INFO: test: HighRate no parameter change
[16:20:57.751] <TB1> INFO: running: highrate
[16:20:57.751] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[16:20:57.897] <TB1> INFO: ----------------------------------------------------------------------
[16:20:57.897] <TB1> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[16:20:57.897] <TB1> INFO: ----------------------------------------------------------------------
[16:20:58.036] <TB1> INFO: Expecting 768 events.
[16:20:59.266] <TB1> INFO: 768 events read in total (511ms).
[16:20:59.361] <TB1> INFO: Test took 1458ms.
[16:20:59.978] <TB1> INFO: Expecting 41600 events.
[16:21:03.652] <TB1> INFO: 41600 events read in total (3146ms).
[16:21:03.654] <TB1> INFO: Test took 4287ms.
[16:21:03.739] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:21:04.383] <TB1> INFO: Expecting 41600 events.
[16:21:08.225] <TB1> INFO: 41600 events read in total (3315ms).
[16:21:08.228] <TB1> INFO: Test took 4458ms.
[16:21:08.325] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:21:08.972] <TB1> INFO: Expecting 41600 events.
[16:21:12.818] <TB1> INFO: 41600 events read in total (3319ms).
[16:21:12.819] <TB1> INFO: Test took 4460ms.
[16:21:12.909] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:21:13.566] <TB1> INFO: Expecting 41600 events.
[16:21:17.431] <TB1> INFO: 41600 events read in total (3337ms).
[16:21:17.433] <TB1> INFO: Test took 4490ms.
[16:21:17.521] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:21:18.170] <TB1> INFO: Expecting 41600 events.
[16:21:21.963] <TB1> INFO: 41600 events read in total (3266ms).
[16:21:21.965] <TB1> INFO: Test took 4410ms.
[16:21:22.061] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:21:22.716] <TB1> INFO: Expecting 41600 events.
[16:21:26.551] <TB1> INFO: 41600 events read in total (3308ms).
[16:21:26.553] <TB1> INFO: Test took 4455ms.
[16:21:26.649] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:21:27.304] <TB1> INFO: Expecting 41600 events.
[16:21:31.011] <TB1> INFO: 41600 events read in total (3180ms).
[16:21:31.013] <TB1> INFO: Test took 4326ms.
[16:21:31.100] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:21:31.749] <TB1> INFO: Expecting 41600 events.
[16:21:35.673] <TB1> INFO: 41600 events read in total (3397ms).
[16:21:35.675] <TB1> INFO: Test took 4538ms.
[16:21:35.765] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:21:36.414] <TB1> INFO: Expecting 41600 events.
[16:21:40.472] <TB1> INFO: 41600 events read in total (3531ms).
[16:21:40.475] <TB1> INFO: Test took 4674ms.
[16:21:40.570] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:21:41.221] <TB1> INFO: Expecting 41600 events.
[16:21:45.338] <TB1> INFO: 41600 events read in total (3590ms).
[16:21:45.340] <TB1> INFO: Test took 4733ms.
[16:21:45.432] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:21:46.096] <TB1> INFO: Expecting 41600 events.
[16:21:50.217] <TB1> INFO: 41600 events read in total (3594ms).
[16:21:50.219] <TB1> INFO: Test took 4749ms.
[16:21:50.310] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:21:50.968] <TB1> INFO: Expecting 41600 events.
[16:21:54.996] <TB1> INFO: 41600 events read in total (3501ms).
[16:21:54.998] <TB1> INFO: Test took 4652ms.
[16:21:55.090] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:21:55.741] <TB1> INFO: Expecting 41600 events.
[16:22:00.041] <TB1> INFO: 41600 events read in total (3773ms).
[16:22:00.043] <TB1> INFO: Test took 4917ms.
[16:22:00.133] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:22:00.778] <TB1> INFO: Expecting 41600 events.
[16:22:05.220] <TB1> INFO: 41600 events read in total (3915ms).
[16:22:05.222] <TB1> INFO: Test took 5057ms.
[16:22:05.314] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:22:05.961] <TB1> INFO: Expecting 41600 events.
[16:22:10.197] <TB1> INFO: 41600 events read in total (3709ms).
[16:22:10.200] <TB1> INFO: Test took 4852ms.
[16:22:10.293] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:22:10.940] <TB1> INFO: Expecting 41600 events.
[16:22:15.402] <TB1> INFO: 41600 events read in total (3935ms).
[16:22:15.404] <TB1> INFO: Test took 5077ms.
[16:22:15.504] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:22:16.169] <TB1> INFO: Expecting 41600 events.
[16:22:20.687] <TB1> INFO: 41600 events read in total (3990ms).
[16:22:20.689] <TB1> INFO: Test took 5146ms.
[16:22:20.783] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:22:21.435] <TB1> INFO: Expecting 41600 events.
[16:22:24.971] <TB1> INFO: 41600 events read in total (3009ms).
[16:22:24.973] <TB1> INFO: Test took 4151ms.
[16:22:25.077] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:22:25.752] <TB1> INFO: Expecting 41600 events.
[16:22:29.357] <TB1> INFO: 41600 events read in total (3078ms).
[16:22:29.359] <TB1> INFO: Test took 4237ms.
[16:22:29.459] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:22:30.126] <TB1> INFO: Expecting 41600 events.
[16:22:33.570] <TB1> INFO: 41600 events read in total (2917ms).
[16:22:33.572] <TB1> INFO: Test took 4073ms.
[16:22:33.661] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:22:33.984] <TB1> INFO: enter test to run
[16:22:33.984] <TB1> INFO: test: Pretest no parameter change
[16:22:33.984] <TB1> INFO: running: pretest
[16:22:33.984] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[16:22:33.984] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[16:22:33.985] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[16:22:33.985] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[16:22:33.985] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[16:22:33.985] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[16:22:33.985] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[16:22:33.985] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[16:22:33.985] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[16:22:33.985] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[16:22:33.985] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[16:22:33.985] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[16:22:33.985] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[16:22:33.985] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[16:22:33.986] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[16:22:33.986] <TB1> INFO: write dac parameters into /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[16:22:33.986] <TB1> INFO: enter test to run
[16:22:33.986] <TB1> INFO: test: no parameter change
[16:22:34.148] <TB1> QUIET: Connection to board 147 closed.
[16:22:34.228] <TB1> INFO: pXar: this is the end, my friend

[16:23:06.428] <TB1> INFO: *** Welcome to pxar ***
[16:23:06.428] <TB1> INFO: *** Today: 2015/09/04
[16:23:06.428] <TB1> INFO: readRocDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//011_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//011_HREfficiency_50//dacParameters35_C15.dat
[16:23:06.429] <TB1> INFO: readTbmDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//011_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//011_HREfficiency_50//tbmParameters_C0b.dat
[16:23:06.429] <TB1> INFO: readMaskFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//011_HREfficiency_50//defaultMaskFile.dat
[16:23:06.429] <TB1> INFO: readTrimFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//011_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//011_HREfficiency_50//trimParameters35_C15.dat
[16:23:06.502] <TB1> INFO: clk: 4
[16:23:06.502] <TB1> INFO: ctr: 4
[16:23:06.502] <TB1> INFO: sda: 19
[16:23:06.502] <TB1> INFO: tin: 9
[16:23:06.502] <TB1> INFO: level: 15
[16:23:06.502] <TB1> INFO: triggerdelay: 0
[16:23:06.502] <TB1> QUIET: Instanciating API for pxar prod-10
[16:23:06.502] <TB1> INFO: Log level: INFO
[16:23:06.515] <TB1> INFO: Found DTB DTB_WWXTQT
[16:23:06.530] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[16:23:06.533] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[16:23:06.536] <TB1> INFO: RPC call hashes of host and DTB match: 397073690
[16:23:08.069] <TB1> INFO: DUT info:
[16:23:08.069] <TB1> INFO: The DUT currently contains the following objects:
[16:23:08.069] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[16:23:08.069] <TB1> INFO: TBM Core alpha (0): 7 registers set
[16:23:08.069] <TB1> INFO: TBM Core beta (1): 7 registers set
[16:23:08.069] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:23:08.069] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.069] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.069] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.069] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.069] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.069] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.069] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.069] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.069] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.069] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.069] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.069] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.069] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.070] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.070] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.070] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:08.471] <TB1> INFO: enter 'restricted' command line mode
[16:23:08.471] <TB1> INFO: enter test to run
[16:23:08.471] <TB1> INFO: test: HighRate no parameter change
[16:23:08.471] <TB1> INFO: running: highrate
[16:23:08.471] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//011_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//011_HREfficiency_50//phCalibrationFitErr35_C15.dat
[16:23:08.661] <TB1> INFO: ----------------------------------------------------------------------
[16:23:08.661] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:23:08.661] <TB1> INFO: ----------------------------------------------------------------------
[16:23:09.268] <TB1> INFO: Expecting 208000 events.
[16:23:21.865] <TB1> INFO: 208000 events read in total (12067ms).
[16:23:21.873] <TB1> INFO: Test took 13206ms.
[16:23:22.188] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:23:22.517] <TB1> INFO: number of dead pixels (per ROC): 0 1 0 1 0 0 0 0 0 0 0 1 0 0 0 0
[16:23:22.517] <TB1> INFO: number of red-efficiency pixels: 168 209 160 246 385 532 364 478 389 473 463 340 309 189 188 154
[16:23:22.517] <TB1> INFO: number of X-ray hits detected: 113725 132605 110070 171972 209375 263103 222152 247550 235550 238718 247260 202433 192552 113103 118200 106900
[16:23:22.517] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:23:22.517] <TB1> INFO: number of Vcal hits detected: 207827 207734 207827 207694 207598 207413 207605 207490 207578 207486 207494 207597 207676 207805 207805 207840
[16:23:22.517] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.9 99.8 99.8 99.8 99.8 99.8 99.8 99.8 99.8 99.9 99.9 99.9 99.9
[16:23:22.517] <TB1> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.9 99.8 99.7 99.8 99.8 99.8 99.8 99.8 99.8 99.8 99.9 99.9 99.9
[16:23:22.517] <TB1> INFO: X-ray hit rate [MHz/cm2]: 33.3 38.9 32.3 50.4 61.4 77.1 65.1 72.6 69.0 70.0 72.5 59.3 56.4 33.2 34.6 31.3
[16:23:22.517] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[16:23:22.553] <TB1> INFO: PixTest:: pg_setup set to default.
[16:23:22.598] <TB1> INFO: enter test to run
[16:23:22.598] <TB1> INFO: test: no parameter change
[16:23:22.757] <TB1> QUIET: Connection to board 147 closed.
[16:23:22.839] <TB1> INFO: pXar: this is the end, my friend

[16:23:57.861] <TB1> INFO: *** Welcome to pxar ***
[16:23:57.861] <TB1> INFO: *** Today: 2015/09/04
[16:23:57.861] <TB1> INFO: readRocDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//012_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//012_HREfficiency_100//dacParameters35_C15.dat
[16:23:57.861] <TB1> INFO: readTbmDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//012_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//012_HREfficiency_100//tbmParameters_C0b.dat
[16:23:57.861] <TB1> INFO: readMaskFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//012_HREfficiency_100//defaultMaskFile.dat
[16:23:57.861] <TB1> INFO: readTrimFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//012_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//012_HREfficiency_100//trimParameters35_C15.dat
[16:23:57.930] <TB1> INFO: clk: 4
[16:23:57.930] <TB1> INFO: ctr: 4
[16:23:57.930] <TB1> INFO: sda: 19
[16:23:57.930] <TB1> INFO: tin: 9
[16:23:57.930] <TB1> INFO: level: 15
[16:23:57.930] <TB1> INFO: triggerdelay: 0
[16:23:57.930] <TB1> QUIET: Instanciating API for pxar prod-10
[16:23:57.931] <TB1> INFO: Log level: INFO
[16:23:57.943] <TB1> INFO: Found DTB DTB_WWXTQT
[16:23:57.958] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[16:23:57.961] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[16:23:57.964] <TB1> INFO: RPC call hashes of host and DTB match: 397073690
[16:23:59.488] <TB1> INFO: DUT info:
[16:23:59.488] <TB1> INFO: The DUT currently contains the following objects:
[16:23:59.488] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[16:23:59.488] <TB1> INFO: TBM Core alpha (0): 7 registers set
[16:23:59.488] <TB1> INFO: TBM Core beta (1): 7 registers set
[16:23:59.488] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:23:59.488] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.488] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.488] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.488] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.488] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.488] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.488] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.488] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.488] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.488] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.488] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.488] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.489] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.489] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.489] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.489] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:23:59.890] <TB1> INFO: enter 'restricted' command line mode
[16:23:59.890] <TB1> INFO: enter test to run
[16:23:59.890] <TB1> INFO: test: HighRate no parameter change
[16:23:59.890] <TB1> INFO: running: highrate
[16:23:59.890] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//012_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//012_HREfficiency_100//phCalibrationFitErr35_C15.dat
[16:24:00.042] <TB1> INFO: ----------------------------------------------------------------------
[16:24:00.042] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:24:00.042] <TB1> INFO: ----------------------------------------------------------------------
[16:24:00.667] <TB1> INFO: Expecting 208000 events.
[16:24:18.404] <TB1> INFO: 208000 events read in total (17208ms).
[16:24:18.415] <TB1> INFO: Test took 18365ms.
[16:24:19.079] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:24:19.511] <TB1> INFO: number of dead pixels (per ROC): 0 1 0 1 0 0 0 0 0 0 0 1 0 0 0 0
[16:24:19.511] <TB1> INFO: number of red-efficiency pixels: 518 674 563 971 1351 1998 1382 1831 1762 1745 1785 1248 1258 586 565 399
[16:24:19.511] <TB1> INFO: number of X-ray hits detected: 228677 265946 225388 342863 414873 516089 439159 490550 466492 470588 482825 399122 380613 230423 239929 215779
[16:24:19.511] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:24:19.511] <TB1> INFO: number of Vcal hits detected: 207431 207204 207269 206777 206101 204679 206029 205305 205481 205257 205263 206228 206288 207228 207389 207571
[16:24:19.511] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.7 99.7 99.7 99.5 99.2 98.6 99.2 98.8 98.9 98.8 98.9 99.3 99.3 99.7 99.7 99.8
[16:24:19.511] <TB1> INFO: Vcal hit overall efficiency (%): 99.7 99.6 99.6 99.4 99.1 98.4 99.1 98.7 98.8 98.7 98.7 99.1 99.2 99.6 99.7 99.8
[16:24:19.511] <TB1> INFO: X-ray hit rate [MHz/cm2]: 67.0 78.0 66.1 100.5 121.6 151.3 128.7 143.8 136.7 137.9 141.5 117.0 111.6 67.5 70.3 63.2
[16:24:19.511] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[16:24:19.548] <TB1> INFO: PixTest:: pg_setup set to default.
[16:24:19.594] <TB1> INFO: enter test to run
[16:24:19.594] <TB1> INFO: test: no parameter change
[16:24:19.763] <TB1> QUIET: Connection to board 147 closed.
[16:24:19.843] <TB1> INFO: pXar: this is the end, my friend

[16:24:54.475] <TB1> INFO: *** Welcome to pxar ***
[16:24:54.475] <TB1> INFO: *** Today: 2015/09/04
[16:24:54.475] <TB1> INFO: readRocDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//013_HREfficiency_150//dacParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//013_HREfficiency_150//dacParameters35_C15.dat
[16:24:54.477] <TB1> INFO: readTbmDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//013_HREfficiency_150//tbmParameters_C0a.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//013_HREfficiency_150//tbmParameters_C0b.dat
[16:24:54.477] <TB1> INFO: readMaskFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//013_HREfficiency_150//defaultMaskFile.dat
[16:24:54.477] <TB1> INFO: readTrimFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//013_HREfficiency_150//trimParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//013_HREfficiency_150//trimParameters35_C15.dat
[16:24:54.546] <TB1> INFO: clk: 4
[16:24:54.546] <TB1> INFO: ctr: 4
[16:24:54.546] <TB1> INFO: sda: 19
[16:24:54.546] <TB1> INFO: tin: 9
[16:24:54.546] <TB1> INFO: level: 15
[16:24:54.546] <TB1> INFO: triggerdelay: 0
[16:24:54.546] <TB1> QUIET: Instanciating API for pxar prod-10
[16:24:54.546] <TB1> INFO: Log level: INFO
[16:24:54.560] <TB1> INFO: Found DTB DTB_WWXTQT
[16:24:54.574] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[16:24:54.577] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[16:24:54.580] <TB1> INFO: RPC call hashes of host and DTB match: 397073690
[16:24:56.101] <TB1> INFO: DUT info:
[16:24:56.101] <TB1> INFO: The DUT currently contains the following objects:
[16:24:56.101] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[16:24:56.101] <TB1> INFO: TBM Core alpha (0): 7 registers set
[16:24:56.101] <TB1> INFO: TBM Core beta (1): 7 registers set
[16:24:56.101] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:24:56.101] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.101] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:24:56.502] <TB1> INFO: enter 'restricted' command line mode
[16:24:56.502] <TB1> INFO: enter test to run
[16:24:56.502] <TB1> INFO: test: HighRate no parameter change
[16:24:56.502] <TB1> INFO: running: highrate
[16:24:56.503] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//013_HREfficiency_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//013_HREfficiency_150//phCalibrationFitErr35_C15.dat
[16:24:56.649] <TB1> INFO: ----------------------------------------------------------------------
[16:24:56.649] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:24:56.649] <TB1> INFO: ----------------------------------------------------------------------
[16:24:57.252] <TB1> INFO: Expecting 208000 events.
[16:25:21.566] <TB1> INFO: 208000 events read in total (23784ms).
[16:25:21.584] <TB1> INFO: Test took 24929ms.
[16:25:22.505] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:25:23.091] <TB1> INFO: number of dead pixels (per ROC): 0 1 0 1 0 0 0 0 0 0 0 1 0 0 0 0
[16:25:23.091] <TB1> INFO: number of red-efficiency pixels: 1140 1545 964 1955 2603 3464 2712 3310 3195 3060 3148 2438 2446 1099 1285 759
[16:25:23.091] <TB1> INFO: number of X-ray hits detected: 329962 386168 327151 492073 590223 738802 627044 704989 667434 672426 687028 568338 545993 336942 347709 310435
[16:25:23.091] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:25:23.091] <TB1> INFO: number of Vcal hits detected: 206584 205857 206248 204626 202644 198278 201947 200177 200716 200202 200176 203152 203365 206004 206397 207125
[16:25:23.091] <TB1> INFO: Vcal hit fiducial efficiency (%): 99.4 99.1 99.3 98.6 97.7 95.9 97.5 96.6 96.8 96.8 96.7 98.0 98.1 99.2 99.3 99.6
[16:25:23.091] <TB1> INFO: Vcal hit overall efficiency (%): 99.3 99.0 99.2 98.4 97.4 95.3 97.1 96.2 96.5 96.3 96.2 97.7 97.8 99.0 99.2 99.6
[16:25:23.091] <TB1> INFO: X-ray hit rate [MHz/cm2]: 96.7 113.2 95.9 144.2 173.0 216.5 183.8 206.6 195.6 197.1 201.4 166.6 160.0 98.8 101.9 91.0
[16:25:23.091] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[16:25:23.129] <TB1> INFO: PixTest:: pg_setup set to default.
[16:25:23.176] <TB1> INFO: enter test to run
[16:25:23.176] <TB1> INFO: test: no parameter change
[16:25:23.335] <TB1> QUIET: Connection to board 147 closed.
[16:25:23.420] <TB1> INFO: pXar: this is the end, my friend

[16:25:54.700] <TB1> INFO: *** Welcome to pxar ***
[16:25:54.700] <TB1> INFO: *** Today: 2015/09/04
[16:25:54.700] <TB1> INFO: readRocDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//014_HREfficiency_200//dacParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//014_HREfficiency_200//dacParameters35_C15.dat
[16:25:54.701] <TB1> INFO: readTbmDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//014_HREfficiency_200//tbmParameters_C0a.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//014_HREfficiency_200//tbmParameters_C0b.dat
[16:25:54.701] <TB1> INFO: readMaskFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//014_HREfficiency_200//defaultMaskFile.dat
[16:25:54.701] <TB1> INFO: readTrimFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//014_HREfficiency_200//trimParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//014_HREfficiency_200//trimParameters35_C15.dat
[16:25:54.791] <TB1> INFO: clk: 4
[16:25:54.792] <TB1> INFO: ctr: 4
[16:25:54.792] <TB1> INFO: sda: 19
[16:25:54.792] <TB1> INFO: tin: 9
[16:25:54.792] <TB1> INFO: level: 15
[16:25:54.792] <TB1> INFO: triggerdelay: 0
[16:25:54.792] <TB1> QUIET: Instanciating API for pxar prod-10
[16:25:54.792] <TB1> INFO: Log level: INFO
[16:25:54.804] <TB1> INFO: Found DTB DTB_WWXTQT
[16:25:54.819] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[16:25:54.822] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[16:25:54.825] <TB1> INFO: RPC call hashes of host and DTB match: 397073690
[16:25:56.363] <TB1> INFO: DUT info:
[16:25:56.363] <TB1> INFO: The DUT currently contains the following objects:
[16:25:56.363] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[16:25:56.363] <TB1> INFO: TBM Core alpha (0): 7 registers set
[16:25:56.363] <TB1> INFO: TBM Core beta (1): 7 registers set
[16:25:56.363] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:25:56.363] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.364] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:25:56.765] <TB1> INFO: enter 'restricted' command line mode
[16:25:56.765] <TB1> INFO: enter test to run
[16:25:56.766] <TB1> INFO: test: HighRate no parameter change
[16:25:56.766] <TB1> INFO: running: highrate
[16:25:56.766] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//014_HREfficiency_200//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//014_HREfficiency_200//phCalibrationFitErr35_C15.dat
[16:25:56.920] <TB1> INFO: ----------------------------------------------------------------------
[16:25:56.920] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:25:56.920] <TB1> INFO: ----------------------------------------------------------------------
[16:25:57.533] <TB1> INFO: Expecting 208000 events.
[16:26:28.205] <TB1> INFO: 206450 events read in total (30141ms).
[16:26:28.697] <TB1> INFO: 208000 events read in total (30633ms).
[16:26:28.734] <TB1> INFO: Test took 31808ms.
[16:26:29.946] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:26:30.579] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0
[16:26:30.579] <TB1> INFO: number of red-efficiency pixels: 1997 2652 1586 3116 3683 4075 3762 4059 4010 3986 3986 3502 3596 1685 2373 1467
[16:26:30.579] <TB1> INFO: number of X-ray hits detected: 445719 522150 442975 662518 793981 988100 840989 949448 895837 902316 916200 760105 734021 454240 469866 419885
[16:26:30.579] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:26:30.579] <TB1> INFO: number of Vcal hits detected: 204859 203120 203803 199982 195149 185173 193411 188379 190325 189302 189779 196648 196891 203275 204185 206017
[16:26:30.579] <TB1> INFO: Vcal hit fiducial efficiency (%): 98.6 97.8 98.4 96.7 94.5 90.1 93.9 91.4 92.2 92.1 92.2 95.2 95.3 98.2 98.3 99.1
[16:26:30.579] <TB1> INFO: Vcal hit overall efficiency (%): 98.5 97.7 98.0 96.1 93.8 89.0 93.0 90.6 91.5 91.0 91.2 94.5 94.7 97.7 98.2 99.0
[16:26:30.579] <TB1> INFO: X-ray hit rate [MHz/cm2]: 130.6 153.0 129.8 194.2 232.7 289.6 246.5 278.3 262.6 264.5 268.5 222.8 215.1 133.1 137.7 123.1
[16:26:30.579] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[16:26:30.610] <TB1> INFO: PixTest:: pg_setup set to default.
[16:26:30.648] <TB1> INFO: enter test to run
[16:26:30.648] <TB1> INFO: test: no parameter change
[16:26:30.847] <TB1> QUIET: Connection to board 147 closed.
[16:26:30.926] <TB1> INFO: pXar: this is the end, my friend

[16:26:59.079] <TB1> INFO: *** Welcome to pxar ***
[16:26:59.079] <TB1> INFO: *** Today: 2015/09/04
[16:26:59.079] <TB1> INFO: readRocDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//015_HREfficiency_250//dacParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//015_HREfficiency_250//dacParameters35_C15.dat
[16:26:59.080] <TB1> INFO: readTbmDacs: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//015_HREfficiency_250//tbmParameters_C0a.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//015_HREfficiency_250//tbmParameters_C0b.dat
[16:26:59.080] <TB1> INFO: readMaskFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//015_HREfficiency_250//defaultMaskFile.dat
[16:26:59.080] <TB1> INFO: readTrimFile: /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//015_HREfficiency_250//trimParameters35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//015_HREfficiency_250//trimParameters35_C15.dat
[16:26:59.152] <TB1> INFO: clk: 4
[16:26:59.152] <TB1> INFO: ctr: 4
[16:26:59.152] <TB1> INFO: sda: 19
[16:26:59.152] <TB1> INFO: tin: 9
[16:26:59.152] <TB1> INFO: level: 15
[16:26:59.152] <TB1> INFO: triggerdelay: 0
[16:26:59.152] <TB1> QUIET: Instanciating API for pxar prod-10
[16:26:59.152] <TB1> INFO: Log level: INFO
[16:26:59.165] <TB1> INFO: Found DTB DTB_WWXTQT
[16:26:59.180] <TB1> QUIET: Connection to board DTB_WWXTQT opened.
[16:26:59.183] <TB1> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 147
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WWXTQT
MAC address: 40D855118093
Hostname: pixelDTB147
Comment:
------------------------------------------------------
[16:26:59.185] <TB1> INFO: RPC call hashes of host and DTB match: 397073690
[16:27:00.710] <TB1> INFO: DUT info:
[16:27:00.710] <TB1> INFO: The DUT currently contains the following objects:
[16:27:00.710] <TB1> INFO: 2 TBM Cores tbm09c (2 ON)
[16:27:00.710] <TB1> INFO: TBM Core alpha (0): 7 registers set
[16:27:00.710] <TB1> INFO: TBM Core beta (1): 7 registers set
[16:27:00.710] <TB1> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[16:27:00.711] <TB1> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:00.711] <TB1> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[16:27:01.112] <TB1> INFO: enter 'restricted' command line mode
[16:27:01.112] <TB1> INFO: enter test to run
[16:27:01.112] <TB1> INFO: test: HighRate no parameter change
[16:27:01.112] <TB1> INFO: running: highrate
[16:27:01.113] <TB1> INFO: readGainPedestalParameters /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//015_HREfficiency_250//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2092_XrayQualification_2015-09-04_17h08m_1441379300//015_HREfficiency_250//phCalibrationFitErr35_C15.dat
[16:27:01.248] <TB1> INFO: ----------------------------------------------------------------------
[16:27:01.248] <TB1> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[16:27:01.248] <TB1> INFO: ----------------------------------------------------------------------
[16:27:01.858] <TB1> INFO: Expecting 208000 events.
[16:27:34.339] <TB1> INFO: 202900 events read in total (31951ms).
[16:27:35.384] <TB1> INFO: 208000 events read in total (32996ms).
[16:27:35.401] <TB1> INFO: Test took 34148ms.
[16:27:36.666] <TB1> INFO: Fetched DAQ statistics. Counters are being reset now.
[16:27:37.311] <TB1> INFO: number of dead pixels (per ROC): 0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0
[16:27:37.311] <TB1> INFO: number of red-efficiency pixels: 2103 2758 1728 3239 3706 4097 3825 4113 4036 4025 4045 3594 3639 1727 2465 1514
[16:27:37.311] <TB1> INFO: number of X-ray hits detected: 458781 537147 461271 677906 812619 1008847 868511 974618 922521 928539 937537 783390 749765 470302 485686 431599
[16:27:37.311] <TB1> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[16:27:37.311] <TB1> INFO: number of Vcal hits detected: 204570 202713 203616 199612 194267 183841 192360 186671 188893 187869 188397 195666 196327 203001 203842 205878
[16:27:37.311] <TB1> INFO: Vcal hit fiducial efficiency (%): 98.5 97.6 98.3 96.5 94.1 89.5 93.4 90.5 91.5 91.4 91.6 94.8 95.1 98.1 98.1 99.0
[16:27:37.311] <TB1> INFO: Vcal hit overall efficiency (%): 98.4 97.5 97.9 96.0 93.4 88.4 92.5 89.7 90.8 90.3 90.6 94.1 94.4 97.6 98.0 99.0
[16:27:37.311] <TB1> INFO: X-ray hit rate [MHz/cm2]: 134.5 157.4 135.2 198.7 238.2 295.7 254.6 285.7 270.4 272.2 274.8 229.6 219.8 137.8 142.4 126.5
[16:27:37.311] <TB1> INFO: PixTestHighRate::doXPixelAlive() done
[16:27:37.338] <TB1> INFO: PixTest:: pg_setup set to default.
[16:27:37.374] <TB1> INFO: enter test to run
[16:27:37.374] <TB1> INFO: test: no parameter change
[16:27:37.623] <TB1> QUIET: Connection to board 147 closed.
[16:27:37.705] <TB1> INFO: pXar: this is the end, my friend