[12:29:06.471] <TB2> INFO: *** Welcome to pxar ***
[12:29:06.471] <TB2> INFO: *** Today: 2015/08/28
[12:29:06.471] <TB2> INFO: readRocDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//000_PixelAlive_p17//dacParameters35_C15.dat
[12:29:06.472] <TB2> INFO: readTbmDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//000_PixelAlive_p17//tbmParameters_C0b.dat
[12:29:06.472] <TB2> INFO: readMaskFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//000_PixelAlive_p17//defaultMaskFile.dat
[12:29:06.472] <TB2> INFO: readTrimFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//000_PixelAlive_p17//trimParameters35_C15.dat
[12:29:06.548] <TB2> INFO: clk: 4
[12:29:06.548] <TB2> INFO: ctr: 4
[12:29:06.548] <TB2> INFO: sda: 19
[12:29:06.548] <TB2> INFO: tin: 9
[12:29:06.548] <TB2> INFO: level: 15
[12:29:06.548] <TB2> INFO: triggerdelay: 0
[12:29:06.548] <TB2> QUIET: Instanciating API for pxar v2.5+57~g44d0777
[12:29:06.548] <TB2> INFO: Log level: INFO
[12:29:06.561] <TB2> INFO: Found DTB DTB_WXENWR
[12:29:06.573] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[12:29:06.576] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[12:29:06.579] <TB2> INFO: RPC call hashes of host and DTB match: 397073690
[12:29:08.134] <TB2> INFO: DUT info:
[12:29:08.134] <TB2> INFO: The DUT currently contains the following objects:
[12:29:08.134] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[12:29:08.134] <TB2> INFO: TBM Core alpha (0): 7 registers set
[12:29:08.134] <TB2> INFO: TBM Core beta (1): 7 registers set
[12:29:08.134] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:29:08.134] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.134] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:29:08.536] <TB2> INFO: enter 'restricted' command line mode
[12:29:08.536] <TB2> INFO: enter test to run
[12:29:08.536] <TB2> INFO: test: PixelAlive no parameter change
[12:29:08.536] <TB2> INFO: running: pixelalive
[12:29:08.542] <TB2> INFO: ######################################################################
[12:29:08.542] <TB2> INFO: PixTestAlive::doTest()
[12:29:08.542] <TB2> INFO: ######################################################################
[12:29:08.544] <TB2> INFO: ----------------------------------------------------------------------
[12:29:08.544] <TB2> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:29:08.544] <TB2> INFO: ----------------------------------------------------------------------
[12:29:08.860] <TB2> INFO: Expecting 41600 events.
[12:29:13.276] <TB2> INFO: 41600 events read in total (3695ms).
[12:29:13.357] <TB2> INFO: Test took 4810ms.
[12:29:13.365] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:29:13.654] <TB2> INFO: PixTestAlive::aliveTest() done
[12:29:13.654] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 2 2 1 0 2 0 0 0 0 0 0 0 1
[12:29:13.656] <TB2> INFO: ----------------------------------------------------------------------
[12:29:13.656] <TB2> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:29:13.656] <TB2> INFO: ----------------------------------------------------------------------
[12:29:13.958] <TB2> INFO: Expecting 41600 events.
[12:29:17.038] <TB2> INFO: 41600 events read in total (2363ms).
[12:29:17.039] <TB2> INFO: Test took 3381ms.
[12:29:17.039] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:29:17.039] <TB2> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[12:29:17.368] <TB2> INFO: PixTestAlive::maskTest() done
[12:29:17.368] <TB2> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:29:17.369] <TB2> INFO: ----------------------------------------------------------------------
[12:29:17.369] <TB2> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[12:29:17.369] <TB2> INFO: ----------------------------------------------------------------------
[12:29:17.668] <TB2> INFO: Expecting 41600 events.
[12:29:21.921] <TB2> INFO: 41600 events read in total (3536ms).
[12:29:21.922] <TB2> INFO: Test took 4551ms.
[12:29:21.928] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[12:29:22.236] <TB2> INFO: PixTestAlive::addressDecodingTest() done
[12:29:22.236] <TB2> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[12:29:22.236] <TB2> INFO: PixTestAlive::doTest() done, duration: 13 seconds
[12:29:22.264] <TB2> INFO: enter test to run
[12:29:22.264] <TB2> INFO: test: no parameter change
[12:29:22.927] <TB2> QUIET: Connection to board 162 closed.
[12:29:23.006] <TB2> INFO: pXar: this is the end, my friend
commander_RetrimHotPixels.log
[12:33:54.975] <TB2> INFO: *** Welcome to pxar ***
[12:33:54.975] <TB2> INFO: *** Today: 2015/08/28
[12:33:54.975] <TB2> INFO: readRocDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//dacParameters35_C15.dat
[12:33:54.976] <TB2> INFO: readTbmDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[12:33:54.976] <TB2> INFO: readMaskFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//defaultMaskFile.dat
[12:33:54.976] <TB2> INFO: readTrimFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C15.dat
[12:33:55.050] <TB2> INFO: clk: 4
[12:33:55.050] <TB2> INFO: ctr: 4
[12:33:55.050] <TB2> INFO: sda: 19
[12:33:55.050] <TB2> INFO: tin: 9
[12:33:55.050] <TB2> INFO: level: 15
[12:33:55.050] <TB2> INFO: triggerdelay: 0
[12:33:55.050] <TB2> QUIET: Instanciating API for pxar v2.5+57~g44d0777
[12:33:55.050] <TB2> INFO: Log level: INFO
[12:33:55.064] <TB2> INFO: Found DTB DTB_WXENWR
[12:33:55.076] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[12:33:55.080] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[12:33:55.083] <TB2> INFO: RPC call hashes of host and DTB match: 397073690
[12:33:56.609] <TB2> INFO: DUT info:
[12:33:56.609] <TB2> INFO: The DUT currently contains the following objects:
[12:33:56.609] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[12:33:56.609] <TB2> INFO: TBM Core alpha (0): 7 registers set
[12:33:56.609] <TB2> INFO: TBM Core beta (1): 7 registers set
[12:33:56.609] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:33:56.609] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.609] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.609] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.609] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.609] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.609] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.609] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.609] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.609] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.609] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.609] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.609] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.609] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.609] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.610] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:56.610] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:33:57.011] <TB2> INFO: enter 'restricted' command line mode
[12:33:57.011] <TB2> INFO: enter test to run
[12:33:57.011] <TB2> INFO: test: delay setting parameters: ->5<-
[12:33:57.011] <TB2> INFO: delay test by 5 seconds...
[12:34:02.011] <TB2> INFO: enter test to run
[12:34:02.011] <TB2> INFO: test: highrate no parameter change
[12:34:02.011] <TB2> INFO: running: highrate
[12:34:02.011] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[12:34:02.164] <TB2> INFO: ----------------------------------------------------------------------
[12:34:02.164] <TB2> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[12:34:02.164] <TB2> INFO: ----------------------------------------------------------------------
[12:34:02.164] <TB2> INFO: THR = 150, corresponding to ~ 400 MHz/cm2
[12:34:02.164] <TB2> INFO: edge/corner pixel THR is adjusted
[12:34:02.164] <TB2> INFO: PixTestHighRate::trimHotPixels: step 0...
[12:34:03.145] <TB2> INFO: Collecting data for 1 seconds...
[12:34:04.147] <TB2> INFO: Done with hot pixel readout
[12:34:09.894] <TB2> INFO: PixTest:: pg_setup set to default.
[12:34:09.895] <TB2> INFO: 6 hot pixels found in step 0
[12:34:10.862] <TB2> INFO: Collecting data for 1 seconds...
[12:34:11.863] <TB2> INFO: Done with hot pixel readout
[12:34:17.592] <TB2> INFO: PixTest:: pg_setup set to default.
[12:34:17.593] <TB2> INFO: 4 hot pixels found in step 1
[12:34:18.559] <TB2> INFO: Collecting data for 1 seconds...
[12:34:19.560] <TB2> INFO: Done with hot pixel readout
[12:34:25.417] <TB2> INFO: PixTest:: pg_setup set to default.
[12:34:25.418] <TB2> INFO: 4 hot pixels found in step 2
[12:34:26.388] <TB2> INFO: Collecting data for 1 seconds...
[12:34:27.390] <TB2> INFO: Done with hot pixel readout
[12:34:33.035] <TB2> INFO: PixTest:: pg_setup set to default.
[12:34:33.036] <TB2> INFO: 0 hot pixels found in step 3
[12:34:33.044] <TB2> INFO: 0 hot pixels could not be trimmed and have been masked.
[12:34:33.073] <TB2> INFO: PixTest::trimHotPixels() done
[12:34:33.076] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C0.dat
[12:34:33.083] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C1.dat
[12:34:33.090] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C2.dat
[12:34:33.096] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C3.dat
[12:34:33.102] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C4.dat
[12:34:33.108] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C5.dat
[12:34:33.114] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C6.dat
[12:34:33.121] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C7.dat
[12:34:33.127] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C8.dat
[12:34:33.134] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C9.dat
[12:34:33.140] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C10.dat
[12:34:33.146] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C11.dat
[12:34:33.152] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C12.dat
[12:34:33.158] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C13.dat
[12:34:33.164] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C14.dat
[12:34:33.171] <TB2> INFO: write trim parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//trimParameters35_C15.dat
[12:34:33.178] <TB2> INFO: write masked pixels into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//002_RetrimHotPixels_150//defaultMaskFile.dat
[12:34:33.210] <TB2> INFO: enter test to run
[12:34:33.210] <TB2> INFO: test: no parameter change
[12:34:33.391] <TB2> QUIET: Connection to board 162 closed.
[12:34:33.471] <TB2> INFO: pXar: this is the end, my friend
[12:35:15.925] <TB2> INFO: *** Welcome to pxar ***
[12:35:15.925] <TB2> INFO: *** Today: 2015/08/28
[12:35:15.925] <TB2> INFO: readRocDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//003_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//003_HRData_50//dacParameters35_C15.dat
[12:35:15.926] <TB2> INFO: readTbmDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//003_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//003_HRData_50//tbmParameters_C0b.dat
[12:35:15.926] <TB2> INFO: readMaskFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//003_HRData_50//defaultMaskFile.dat
[12:35:15.926] <TB2> INFO: readTrimFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//003_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//003_HRData_50//trimParameters35_C15.dat
[12:35:15.996] <TB2> INFO: clk: 4
[12:35:15.996] <TB2> INFO: ctr: 4
[12:35:15.996] <TB2> INFO: sda: 19
[12:35:15.996] <TB2> INFO: tin: 9
[12:35:15.996] <TB2> INFO: level: 15
[12:35:15.996] <TB2> INFO: triggerdelay: 0
[12:35:15.996] <TB2> QUIET: Instanciating API for pxar v2.5+57~g44d0777
[12:35:15.996] <TB2> INFO: Log level: INFO
[12:35:16.011] <TB2> INFO: Found DTB DTB_WXENWR
[12:35:16.023] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[12:35:16.026] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[12:35:16.029] <TB2> INFO: RPC call hashes of host and DTB match: 397073690
[12:35:17.565] <TB2> INFO: DUT info:
[12:35:17.565] <TB2> INFO: The DUT currently contains the following objects:
[12:35:17.565] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[12:35:17.565] <TB2> INFO: TBM Core alpha (0): 7 registers set
[12:35:17.565] <TB2> INFO: TBM Core beta (1): 7 registers set
[12:35:17.565] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:35:17.565] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.565] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:35:17.966] <TB2> INFO: enter 'restricted' command line mode
[12:35:17.966] <TB2> INFO: enter test to run
[12:35:17.966] <TB2> INFO: test: delay setting parameters: ->5<-
[12:35:17.966] <TB2> INFO: delay test by 5 seconds...
[12:35:22.967] <TB2> INFO: enter test to run
[12:35:22.967] <TB2> INFO: test: Xray no parameter change
[12:35:22.967] <TB2> INFO: running: xray
[12:35:22.967] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//003_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//003_HRData_50//phCalibrationFitErr35_C15.dat
[12:35:23.111] <TB2> INFO: ######################################################################
[12:35:23.111] <TB2> INFO: PixTestXray::doTest()
[12:35:23.111] <TB2> INFO: ######################################################################
[12:35:23.111] <TB2> INFO: ----------------------------------------------------------------------
[12:35:23.111] <TB2> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[12:35:23.111] <TB2> INFO: ----------------------------------------------------------------------
[12:35:24.084] <TB2> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[12:35:30.012] <TB2> INFO: run duration 5 seconds, buffer almost full (81%), pausing triggers.
[12:35:50.160] <TB2> INFO: Resuming triggers.
[12:35:56.094] <TB2> INFO: run duration 11 seconds, buffer almost full (81%), pausing triggers.
[12:36:15.771] <TB2> INFO: Resuming triggers.
[12:36:21.704] <TB2> INFO: run duration 17 seconds, buffer almost full (81%), pausing triggers.
[12:36:42.942] <TB2> INFO: Resuming triggers.
[12:36:48.878] <TB2> INFO: run duration 23 seconds, buffer almost full (81%), pausing triggers.
[12:37:09.364] <TB2> INFO: Resuming triggers.
[12:37:15.302] <TB2> INFO: run duration 29 seconds, buffer almost full (81%), pausing triggers.
[12:37:36.262] <TB2> INFO: Resuming triggers.
[12:37:42.201] <TB2> INFO: run duration 35 seconds, buffer almost full (81%), pausing triggers.
[12:38:03.295] <TB2> INFO: Resuming triggers.
[12:38:09.231] <TB2> INFO: run duration 41 seconds, buffer almost full (81%), pausing triggers.
[12:38:30.658] <TB2> INFO: Resuming triggers.
[12:38:36.596] <TB2> INFO: run duration 47 seconds, buffer almost full (81%), pausing triggers.
[12:38:57.845] <TB2> INFO: Resuming triggers.
[12:39:03.786] <TB2> INFO: run duration 53 seconds, buffer almost full (81%), pausing triggers.
[12:39:25.197] <TB2> INFO: Resuming triggers.
[12:39:31.137] <TB2> INFO: run duration 59 seconds, buffer almost full (81%), pausing triggers.
[12:39:52.301] <TB2> INFO: Resuming triggers.
[12:39:58.242] <TB2> INFO: run duration 65 seconds, buffer almost full (81%), pausing triggers.
[12:40:19.970] <TB2> INFO: Resuming triggers.
[12:40:25.911] <TB2> INFO: run duration 71 seconds, buffer almost full (81%), pausing triggers.
[12:40:46.759] <TB2> INFO: Resuming triggers.
[12:40:52.699] <TB2> INFO: run duration 77 seconds, buffer almost full (81%), pausing triggers.
[12:41:13.382] <TB2> INFO: Resuming triggers.
[12:41:19.321] <TB2> INFO: run duration 83 seconds, buffer almost full (81%), pausing triggers.
[12:41:40.256] <TB2> INFO: Resuming triggers.
[12:41:46.198] <TB2> INFO: run duration 88 seconds, buffer almost full (81%), pausing triggers.
[12:42:07.200] <TB2> INFO: Resuming triggers.
[12:42:13.138] <TB2> INFO: run duration 94 seconds, buffer almost full (81%), pausing triggers.
[12:42:33.724] <TB2> INFO: Resuming triggers.
[12:42:38.806] <TB2> INFO: data taking finished, elapsed time: 100 seconds.
[12:42:57.065] <TB2> INFO: PixTest:: pg_setup set to default.
[12:42:57.067] <TB2> INFO: PixTestXray::doPhRun() done
[12:42:57.067] <TB2> INFO: PixTestXray::doTest() done
[12:42:57.295] <TB2> INFO: enter test to run
[12:42:57.295] <TB2> INFO: test: no parameter change
[12:42:57.520] <TB2> QUIET: Connection to board 162 closed.
[12:42:57.600] <TB2> INFO: pXar: this is the end, my friend
[12:43:14.672] <TB2> INFO: *** Welcome to pxar ***
[12:43:14.672] <TB2> INFO: *** Today: 2015/08/28
[12:43:14.672] <TB2> INFO: readRocDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//004_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//004_HRData_150//dacParameters35_C15.dat
[12:43:14.673] <TB2> INFO: readTbmDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//004_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//004_HRData_150//tbmParameters_C0b.dat
[12:43:14.673] <TB2> INFO: readMaskFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//004_HRData_150//defaultMaskFile.dat
[12:43:14.673] <TB2> INFO: readTrimFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//004_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//004_HRData_150//trimParameters35_C15.dat
[12:43:14.750] <TB2> INFO: clk: 4
[12:43:14.750] <TB2> INFO: ctr: 4
[12:43:14.750] <TB2> INFO: sda: 19
[12:43:14.750] <TB2> INFO: tin: 9
[12:43:14.750] <TB2> INFO: level: 15
[12:43:14.750] <TB2> INFO: triggerdelay: 0
[12:43:14.750] <TB2> QUIET: Instanciating API for pxar v2.5+57~g44d0777
[12:43:14.750] <TB2> INFO: Log level: INFO
[12:43:14.764] <TB2> INFO: Found DTB DTB_WXENWR
[12:43:14.776] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[12:43:14.779] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[12:43:14.782] <TB2> INFO: RPC call hashes of host and DTB match: 397073690
[12:43:16.347] <TB2> INFO: DUT info:
[12:43:16.347] <TB2> INFO: The DUT currently contains the following objects:
[12:43:16.347] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[12:43:16.347] <TB2> INFO: TBM Core alpha (0): 7 registers set
[12:43:16.347] <TB2> INFO: TBM Core beta (1): 7 registers set
[12:43:16.347] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:43:16.347] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.347] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:43:16.748] <TB2> INFO: enter 'restricted' command line mode
[12:43:16.748] <TB2> INFO: enter test to run
[12:43:16.748] <TB2> INFO: test: delay setting parameters: ->5<-
[12:43:16.748] <TB2> INFO: delay test by 5 seconds...
[12:43:21.749] <TB2> INFO: enter test to run
[12:43:21.749] <TB2> INFO: test: Xray no parameter change
[12:43:21.749] <TB2> INFO: running: xray
[12:43:21.749] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//004_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//004_HRData_150//phCalibrationFitErr35_C15.dat
[12:43:21.891] <TB2> INFO: ######################################################################
[12:43:21.891] <TB2> INFO: PixTestXray::doTest()
[12:43:21.891] <TB2> INFO: ######################################################################
[12:43:21.891] <TB2> INFO: ----------------------------------------------------------------------
[12:43:21.891] <TB2> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[12:43:21.891] <TB2> INFO: ----------------------------------------------------------------------
[12:43:22.864] <TB2> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[12:43:25.943] <TB2> INFO: run duration 3 seconds, buffer almost full (81%), pausing triggers.
[12:43:47.644] <TB2> INFO: Resuming triggers.
[12:43:50.736] <TB2> INFO: run duration 6 seconds, buffer almost full (81%), pausing triggers.
[12:44:11.773] <TB2> INFO: Resuming triggers.
[12:44:14.861] <TB2> INFO: run duration 9 seconds, buffer almost full (81%), pausing triggers.
[12:44:36.807] <TB2> INFO: Resuming triggers.
[12:44:39.897] <TB2> INFO: run duration 12 seconds, buffer almost full (81%), pausing triggers.
[12:45:01.498] <TB2> INFO: Resuming triggers.
[12:45:04.590] <TB2> INFO: run duration 15 seconds, buffer almost full (81%), pausing triggers.
[12:45:27.041] <TB2> INFO: Resuming triggers.
[12:45:30.134] <TB2> INFO: run duration 18 seconds, buffer almost full (81%), pausing triggers.
[12:45:53.171] <TB2> INFO: Resuming triggers.
[12:45:56.259] <TB2> INFO: run duration 21 seconds, buffer almost full (81%), pausing triggers.
[12:46:19.008] <TB2> INFO: Resuming triggers.
[12:46:22.095] <TB2> INFO: run duration 24 seconds, buffer almost full (81%), pausing triggers.
[12:46:45.642] <TB2> INFO: Resuming triggers.
[12:46:48.729] <TB2> INFO: run duration 27 seconds, buffer almost full (81%), pausing triggers.
[12:47:12.419] <TB2> INFO: Resuming triggers.
[12:47:15.507] <TB2> INFO: run duration 30 seconds, buffer almost full (81%), pausing triggers.
[12:47:38.897] <TB2> INFO: Resuming triggers.
[12:47:41.985] <TB2> INFO: run duration 33 seconds, buffer almost full (81%), pausing triggers.
[12:48:04.877] <TB2> INFO: Resuming triggers.
[12:48:07.961] <TB2> INFO: run duration 37 seconds, buffer almost full (81%), pausing triggers.
[12:48:30.502] <TB2> INFO: Resuming triggers.
[12:48:33.585] <TB2> INFO: run duration 40 seconds, buffer almost full (81%), pausing triggers.
[12:48:56.695] <TB2> INFO: Resuming triggers.
[12:48:59.777] <TB2> INFO: run duration 43 seconds, buffer almost full (81%), pausing triggers.
[12:49:22.308] <TB2> INFO: Resuming triggers.
[12:49:25.389] <TB2> INFO: run duration 46 seconds, buffer almost full (81%), pausing triggers.
[12:49:48.320] <TB2> INFO: Resuming triggers.
[12:49:51.401] <TB2> INFO: run duration 49 seconds, buffer almost full (81%), pausing triggers.
[12:50:14.535] <TB2> INFO: Resuming triggers.
[12:50:17.620] <TB2> INFO: run duration 52 seconds, buffer almost full (81%), pausing triggers.
[12:50:39.959] <TB2> INFO: Resuming triggers.
[12:50:43.040] <TB2> INFO: run duration 55 seconds, buffer almost full (81%), pausing triggers.
[12:51:05.323] <TB2> INFO: Resuming triggers.
[12:51:08.402] <TB2> INFO: run duration 58 seconds, buffer almost full (81%), pausing triggers.
[12:51:31.290] <TB2> INFO: Resuming triggers.
[12:51:34.370] <TB2> INFO: run duration 61 seconds, buffer almost full (81%), pausing triggers.
[12:51:57.238] <TB2> INFO: Resuming triggers.
[12:52:00.322] <TB2> INFO: run duration 64 seconds, buffer almost full (81%), pausing triggers.
[12:52:23.285] <TB2> INFO: Resuming triggers.
[12:52:26.365] <TB2> INFO: run duration 67 seconds, buffer almost full (81%), pausing triggers.
[12:52:49.166] <TB2> INFO: Resuming triggers.
[12:52:52.243] <TB2> INFO: run duration 70 seconds, buffer almost full (81%), pausing triggers.
[12:53:14.978] <TB2> INFO: Resuming triggers.
[12:53:18.061] <TB2> INFO: run duration 73 seconds, buffer almost full (81%), pausing triggers.
[12:53:41.296] <TB2> INFO: Resuming triggers.
[12:53:44.377] <TB2> INFO: run duration 77 seconds, buffer almost full (81%), pausing triggers.
[12:54:06.665] <TB2> INFO: Resuming triggers.
[12:54:09.743] <TB2> INFO: run duration 80 seconds, buffer almost full (81%), pausing triggers.
[12:54:31.862] <TB2> INFO: Resuming triggers.
[12:54:34.939] <TB2> INFO: run duration 83 seconds, buffer almost full (81%), pausing triggers.
[12:54:57.199] <TB2> INFO: Resuming triggers.
[12:55:00.278] <TB2> INFO: run duration 86 seconds, buffer almost full (81%), pausing triggers.
[12:55:22.673] <TB2> INFO: Resuming triggers.
[12:55:25.749] <TB2> INFO: run duration 89 seconds, buffer almost full (81%), pausing triggers.
[12:55:47.507] <TB2> INFO: Resuming triggers.
[12:55:50.584] <TB2> INFO: run duration 92 seconds, buffer almost full (81%), pausing triggers.
[12:56:12.635] <TB2> INFO: Resuming triggers.
[12:56:15.713] <TB2> INFO: run duration 95 seconds, buffer almost full (81%), pausing triggers.
[12:56:37.562] <TB2> INFO: Resuming triggers.
[12:56:40.647] <TB2> INFO: run duration 98 seconds, buffer almost full (81%), pausing triggers.
[12:57:02.470] <TB2> INFO: Resuming triggers.
[12:57:03.883] <TB2> INFO: data taking finished, elapsed time: 100 seconds.
[12:57:13.424] <TB2> INFO: PixTest:: pg_setup set to default.
[12:57:13.426] <TB2> INFO: PixTestXray::doPhRun() done
[12:57:13.426] <TB2> INFO: PixTestXray::doTest() done
[12:57:13.613] <TB2> INFO: enter test to run
[12:57:13.613] <TB2> INFO: test: no parameter change
[12:57:13.796] <TB2> QUIET: Connection to board 162 closed.
[12:57:13.880] <TB2> INFO: pXar: this is the end, my friend
[12:57:28.040] <TB2> INFO: *** Welcome to pxar ***
[12:57:28.040] <TB2> INFO: *** Today: 2015/08/28
[12:57:28.040] <TB2> INFO: readRocDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//005_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//005_HRSCurves_100//dacParameters35_C15.dat
[12:57:28.040] <TB2> INFO: readTbmDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//005_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//005_HRSCurves_100//tbmParameters_C0b.dat
[12:57:28.041] <TB2> INFO: readMaskFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//005_HRSCurves_100//defaultMaskFile.dat
[12:57:28.041] <TB2> INFO: readTrimFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//005_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//005_HRSCurves_100//trimParameters35_C15.dat
[12:57:28.113] <TB2> INFO: clk: 4
[12:57:28.113] <TB2> INFO: ctr: 4
[12:57:28.113] <TB2> INFO: sda: 19
[12:57:28.113] <TB2> INFO: tin: 9
[12:57:28.113] <TB2> INFO: level: 15
[12:57:28.113] <TB2> INFO: triggerdelay: 0
[12:57:28.113] <TB2> QUIET: Instanciating API for pxar v2.5+57~g44d0777
[12:57:28.113] <TB2> INFO: Log level: INFO
[12:57:28.127] <TB2> INFO: Found DTB DTB_WXENWR
[12:57:28.139] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[12:57:28.142] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[12:57:28.145] <TB2> INFO: RPC call hashes of host and DTB match: 397073690
[12:57:29.671] <TB2> INFO: DUT info:
[12:57:29.671] <TB2> INFO: The DUT currently contains the following objects:
[12:57:29.671] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[12:57:29.671] <TB2> INFO: TBM Core alpha (0): 7 registers set
[12:57:29.671] <TB2> INFO: TBM Core beta (1): 7 registers set
[12:57:29.671] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[12:57:29.671] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:29.671] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[12:57:30.072] <TB2> INFO: enter 'restricted' command line mode
[12:57:30.072] <TB2> INFO: enter test to run
[12:57:30.073] <TB2> INFO: test: Highrate no parameter change
[12:57:30.073] <TB2> INFO: running: highrate
[12:57:30.073] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//005_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//005_HRSCurves_100//phCalibrationFitErr35_C15.dat
[12:57:30.209] <TB2> INFO: ----------------------------------------------------------------------
[12:57:30.209] <TB2> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[12:57:30.209] <TB2> INFO: ----------------------------------------------------------------------
[12:57:30.216] <TB2> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 0 .. 100 (20/-1) hits flags = 384 (plus default)
[12:57:30.410] <TB2> INFO: dacScan step from 0 .. 19
[12:57:30.410] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[12:57:30.410] <TB2> INFO: run 1 of 1
[12:57:31.012] <TB2> INFO: Expecting 4160000 events.
[12:57:56.864] <TB2> INFO: 402600 events read in total (25321ms).
[12:58:22.689] <TB2> INFO: 806550 events read in total (51146ms).
[12:58:49.021] <TB2> INFO: 1210400 events read in total (77478ms).
[12:59:15.031] <TB2> INFO: 1614150 events read in total (103489ms).
[12:59:41.160] <TB2> INFO: 2017700 events read in total (129617ms).
[13:00:07.728] <TB2> INFO: 2421550 events read in total (156185ms).
[13:00:34.017] <TB2> INFO: 2825100 events read in total (182474ms).
[13:01:00.317] <TB2> INFO: 3228500 events read in total (208774ms).
[13:01:25.813] <TB2> INFO: 3632300 events read in total (234270ms).
[13:01:52.260] <TB2> INFO: 4035800 events read in total (260717ms).
[13:02:00.218] <TB2> INFO: 4160000 events read in total (268675ms).
[13:02:00.379] <TB2> INFO: Test took 269969ms.
[13:02:03.689] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:02:09.926] <TB2> INFO: dacScan step from 20 .. 39
[13:02:09.926] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[13:02:09.926] <TB2> INFO: run 1 of 1
[13:02:10.521] <TB2> INFO: Expecting 4160000 events.
[13:02:36.796] <TB2> INFO: 401100 events read in total (25740ms).
[13:03:02.753] <TB2> INFO: 802400 events read in total (51697ms).
[13:03:28.596] <TB2> INFO: 1203850 events read in total (77540ms).
[13:03:53.977] <TB2> INFO: 1605450 events read in total (102921ms).
[13:04:19.602] <TB2> INFO: 2006450 events read in total (128546ms).
[13:04:45.478] <TB2> INFO: 2407350 events read in total (154422ms).
[13:05:11.315] <TB2> INFO: 2807900 events read in total (180259ms).
[13:05:37.421] <TB2> INFO: 3207450 events read in total (206365ms).
[13:06:03.470] <TB2> INFO: 3606400 events read in total (232414ms).
[13:06:29.423] <TB2> INFO: 4004700 events read in total (258367ms).
[13:06:39.958] <TB2> INFO: 4160000 events read in total (268902ms).
[13:06:40.204] <TB2> INFO: Test took 270278ms.
[13:06:44.078] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:06:49.741] <TB2> INFO: dacScan step from 40 .. 59
[13:06:49.742] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[13:06:49.742] <TB2> INFO: run 1 of 1
[13:06:50.339] <TB2> INFO: Expecting 4160000 events.
[13:07:15.700] <TB2> INFO: 331450 events read in total (24824ms).
[13:07:40.343] <TB2> INFO: 663300 events read in total (49467ms).
[13:08:05.082] <TB2> INFO: 994800 events read in total (74206ms).
[13:08:29.099] <TB2> INFO: 1325650 events read in total (98223ms).
[13:08:53.635] <TB2> INFO: 1655700 events read in total (122759ms).
[13:09:18.099] <TB2> INFO: 1984750 events read in total (147223ms).
[13:09:42.738] <TB2> INFO: 2312600 events read in total (171862ms).
[13:10:06.908] <TB2> INFO: 2638750 events read in total (196032ms).
[13:10:31.509] <TB2> INFO: 2963150 events read in total (220633ms).
[13:10:55.581] <TB2> INFO: 3285650 events read in total (244705ms).
[13:11:19.626] <TB2> INFO: 3606600 events read in total (268750ms).
[13:11:43.658] <TB2> INFO: 3927000 events read in total (292782ms).
[13:12:02.008] <TB2> INFO: 4160000 events read in total (311132ms).
[13:12:02.261] <TB2> INFO: Test took 312519ms.
[13:12:06.177] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:12:11.995] <TB2> INFO: dacScan step from 60 .. 79
[13:12:11.995] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[13:12:11.995] <TB2> INFO: run 1 of 1
[13:12:12.605] <TB2> INFO: Expecting 4160000 events.
[13:12:37.537] <TB2> INFO: 307600 events read in total (24397ms).
[13:13:01.354] <TB2> INFO: 615450 events read in total (48214ms).
[13:13:25.527] <TB2> INFO: 923250 events read in total (72387ms).
[13:13:49.319] <TB2> INFO: 1231050 events read in total (96179ms).
[13:14:13.492] <TB2> INFO: 1538900 events read in total (120352ms).
[13:14:37.703] <TB2> INFO: 1846750 events read in total (144563ms).
[13:15:01.471] <TB2> INFO: 2154450 events read in total (168331ms).
[13:15:25.269] <TB2> INFO: 2462050 events read in total (192129ms).
[13:15:49.823] <TB2> INFO: 2769700 events read in total (216683ms).
[13:16:13.694] <TB2> INFO: 3077050 events read in total (240554ms).
[13:16:37.675] <TB2> INFO: 3384700 events read in total (264535ms).
[13:17:01.901] <TB2> INFO: 3692350 events read in total (288761ms).
[13:17:26.272] <TB2> INFO: 4000100 events read in total (313132ms).
[13:17:39.187] <TB2> INFO: 4160000 events read in total (326047ms).
[13:17:39.389] <TB2> INFO: Test took 327393ms.
[13:17:41.680] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:17:47.457] <TB2> INFO: dacScan step from 80 .. 99
[13:17:47.458] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[13:17:47.458] <TB2> INFO: run 1 of 1
[13:17:48.060] <TB2> INFO: Expecting 4160000 events.
[13:18:12.567] <TB2> INFO: 307050 events read in total (23958ms).
[13:18:36.621] <TB2> INFO: 614750 events read in total (48012ms).
[13:19:00.995] <TB2> INFO: 922200 events read in total (72386ms).
[13:19:25.240] <TB2> INFO: 1229650 events read in total (96631ms).
[13:19:49.676] <TB2> INFO: 1537500 events read in total (121067ms).
[13:20:13.395] <TB2> INFO: 1844950 events read in total (144786ms).
[13:20:37.688] <TB2> INFO: 2152600 events read in total (169079ms).
[13:21:01.542] <TB2> INFO: 2460050 events read in total (192933ms).
[13:21:25.557] <TB2> INFO: 2767500 events read in total (216948ms).
[13:21:49.650] <TB2> INFO: 3075150 events read in total (241041ms).
[13:22:13.258] <TB2> INFO: 3382850 events read in total (264649ms).
[13:22:37.010] <TB2> INFO: 3690400 events read in total (288401ms).
[13:23:01.277] <TB2> INFO: 3997750 events read in total (312668ms).
[13:23:13.910] <TB2> INFO: 4160000 events read in total (325301ms).
[13:23:14.137] <TB2> INFO: Test took 326679ms.
[13:23:17.141] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:23:23.072] <TB2> INFO: dacScan step from 100 .. 100
[13:23:23.072] <TB2> INFO: dacScan split into 1 runs with ntrig = 50
[13:23:23.072] <TB2> INFO: run 1 of 1
[13:23:23.732] <TB2> INFO: Expecting 208000 events.
[13:23:41.879] <TB2> INFO: 208000 events read in total (17619ms).
[13:23:41.887] <TB2> INFO: Test took 18814ms.
[13:23:41.987] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:23:42.278] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:23:43.622] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:23:44.897] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:23:46.172] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:23:47.504] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:23:48.870] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:23:50.288] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:23:51.705] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:23:53.139] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:23:54.575] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:23:56.001] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:23:57.436] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:23:58.831] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:24:00.212] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:24:01.497] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:24:02.770] <TB2> INFO: dumping ASCII scurve output file: XSCurveData
[13:24:04.037] <TB2> INFO: PixTest:: pg_setup set to default.
[13:24:04.039] <TB2> INFO: vcal mean: 39.33 39.95 39.99 42.41 43.28 44.92 44.29 45.51 45.36 44.67 44.36 43.51 43.21 39.91 40.10 39.71
[13:24:04.039] <TB2> INFO: vcal RMS: 1.36 1.26 1.12 1.75 1.58 1.65 1.57 1.86 1.65 1.58 1.61 1.75 1.47 1.45 1.28 1.36
[13:24:04.039] <TB2> INFO: number of X-ray hits detected: 211821 211815 208061 343804 410386 495131 452194 509521 487533 460552 452230 396697 371565 216692 216664 214622
[13:24:04.039] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[13:24:04.039] <TB2> INFO: X-ray hit rate [MHz/cm2]: 62.1 62.1 61.0 100.8 120.3 145.1 132.5 149.3 142.9 135.0 132.6 116.3 108.9 63.5 63.5 62.9
[13:24:04.039] <TB2> INFO: PixTestHighRate::doXNoiseMaps() done
[13:24:04.134] <TB2> INFO: enter test to run
[13:24:04.134] <TB2> INFO: test: no parameter change
[13:24:04.303] <TB2> QUIET: Connection to board 162 closed.
[13:24:04.382] <TB2> INFO: pXar: this is the end, my friend
commander_CalDelScanAndSaveDacs.log
[13:42:12.475] <TB2> INFO: *** Welcome to pxar ***
[13:42:12.475] <TB2> INFO: *** Today: 2015/08/28
[13:42:12.475] <TB2> INFO: readRocDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[13:42:12.477] <TB2> INFO: readTbmDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[13:42:12.477] <TB2> INFO: readMaskFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[13:42:12.477] <TB2> INFO: readTrimFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[13:42:12.548] <TB2> INFO: clk: 4
[13:42:12.548] <TB2> INFO: ctr: 4
[13:42:12.548] <TB2> INFO: sda: 19
[13:42:12.548] <TB2> INFO: tin: 9
[13:42:12.548] <TB2> INFO: level: 15
[13:42:12.548] <TB2> INFO: triggerdelay: 0
[13:42:12.548] <TB2> QUIET: Instanciating API for pxar v2.5+57~g44d0777
[13:42:12.548] <TB2> INFO: Log level: INFO
[13:42:12.561] <TB2> INFO: Found DTB DTB_WXENWR
[13:42:12.573] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[13:42:12.577] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[13:42:12.580] <TB2> INFO: RPC call hashes of host and DTB match: 397073690
[13:42:14.106] <TB2> INFO: DUT info:
[13:42:14.106] <TB2> INFO: The DUT currently contains the following objects:
[13:42:14.106] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[13:42:14.106] <TB2> INFO: TBM Core alpha (0): 7 registers set
[13:42:14.106] <TB2> INFO: TBM Core beta (1): 7 registers set
[13:42:14.106] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:42:14.106] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.106] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:42:14.507] <TB2> INFO: enter 'restricted' command line mode
[13:42:14.507] <TB2> INFO: enter test to run
[13:42:14.507] <TB2> INFO: test: HighRate no parameter change
[13:42:14.507] <TB2> INFO: running: highrate
[13:42:14.508] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[13:42:14.674] <TB2> INFO: ----------------------------------------------------------------------
[13:42:14.675] <TB2> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[13:42:14.675] <TB2> INFO: ----------------------------------------------------------------------
[13:42:14.816] <TB2> INFO: Expecting 768 events.
[13:42:16.049] <TB2> INFO: 768 events read in total (513ms).
[13:42:16.144] <TB2> INFO: Test took 1462ms.
[13:42:16.764] <TB2> INFO: Expecting 41600 events.
[13:42:20.061] <TB2> INFO: 41600 events read in total (2769ms).
[13:42:20.063] <TB2> INFO: Test took 3913ms.
[13:42:20.148] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:42:20.794] <TB2> INFO: Expecting 41600 events.
[13:42:24.297] <TB2> INFO: 41600 events read in total (2974ms).
[13:42:24.300] <TB2> INFO: Test took 4122ms.
[13:42:24.392] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:42:25.044] <TB2> INFO: Expecting 41600 events.
[13:42:28.507] <TB2> INFO: 41600 events read in total (2935ms).
[13:42:28.509] <TB2> INFO: Test took 4079ms.
[13:42:28.663] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:42:29.311] <TB2> INFO: Expecting 41600 events.
[13:42:32.763] <TB2> INFO: 41600 events read in total (2924ms).
[13:42:32.765] <TB2> INFO: Test took 4068ms.
[13:42:32.857] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:42:33.517] <TB2> INFO: Expecting 41600 events.
[13:42:36.959] <TB2> INFO: 41600 events read in total (2914ms).
[13:42:36.961] <TB2> INFO: Test took 4059ms.
[13:42:37.047] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:42:37.695] <TB2> INFO: Expecting 41600 events.
[13:42:41.144] <TB2> INFO: 41600 events read in total (2921ms).
[13:42:41.146] <TB2> INFO: Test took 4066ms.
[13:42:41.242] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:42:41.890] <TB2> INFO: Expecting 41600 events.
[13:42:45.517] <TB2> INFO: 41600 events read in total (3099ms).
[13:42:45.519] <TB2> INFO: Test took 4243ms.
[13:42:45.605] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:42:46.252] <TB2> INFO: Expecting 41600 events.
[13:42:49.774] <TB2> INFO: 41600 events read in total (2993ms).
[13:42:49.776] <TB2> INFO: Test took 4139ms.
[13:42:49.865] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:42:50.550] <TB2> INFO: Expecting 41600 events.
[13:42:54.087] <TB2> INFO: 41600 events read in total (3009ms).
[13:42:54.089] <TB2> INFO: Test took 4173ms.
[13:42:54.175] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:42:54.822] <TB2> INFO: Expecting 41600 events.
[13:42:58.224] <TB2> INFO: 41600 events read in total (2874ms).
[13:42:58.226] <TB2> INFO: Test took 4019ms.
[13:42:58.315] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:42:58.963] <TB2> INFO: Expecting 41600 events.
[13:43:02.458] <TB2> INFO: 41600 events read in total (2967ms).
[13:43:02.460] <TB2> INFO: Test took 4111ms.
[13:43:02.558] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:43:03.208] <TB2> INFO: Expecting 41600 events.
[13:43:06.672] <TB2> INFO: 41600 events read in total (2936ms).
[13:43:06.675] <TB2> INFO: Test took 4082ms.
[13:43:06.764] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:43:07.415] <TB2> INFO: Expecting 41600 events.
[13:43:10.849] <TB2> INFO: 41600 events read in total (2905ms).
[13:43:10.851] <TB2> INFO: Test took 4049ms.
[13:43:10.945] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:43:11.593] <TB2> INFO: Expecting 41600 events.
[13:43:15.076] <TB2> INFO: 41600 events read in total (2955ms).
[13:43:15.078] <TB2> INFO: Test took 4100ms.
[13:43:15.169] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:43:15.817] <TB2> INFO: Expecting 41600 events.
[13:43:19.432] <TB2> INFO: 41600 events read in total (3086ms).
[13:43:19.435] <TB2> INFO: Test took 4232ms.
[13:43:19.543] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:43:20.192] <TB2> INFO: Expecting 41600 events.
[13:43:23.673] <TB2> INFO: 41600 events read in total (2953ms).
[13:43:23.675] <TB2> INFO: Test took 4099ms.
[13:43:23.765] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:43:24.413] <TB2> INFO: Expecting 41600 events.
[13:43:27.936] <TB2> INFO: 41600 events read in total (2994ms).
[13:43:27.938] <TB2> INFO: Test took 4139ms.
[13:43:28.041] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:43:28.690] <TB2> INFO: Expecting 41600 events.
[13:43:32.325] <TB2> INFO: 41600 events read in total (3106ms).
[13:43:32.327] <TB2> INFO: Test took 4253ms.
[13:43:32.417] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:43:33.071] <TB2> INFO: Expecting 41600 events.
[13:43:36.315] <TB2> INFO: 41600 events read in total (2716ms).
[13:43:36.317] <TB2> INFO: Test took 3861ms.
[13:43:36.402] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:43:37.050] <TB2> INFO: Expecting 41600 events.
[13:43:40.194] <TB2> INFO: 41600 events read in total (2617ms).
[13:43:40.196] <TB2> INFO: Test took 3761ms.
[13:43:40.278] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:43:40.596] <TB2> INFO: enter test to run
[13:43:40.596] <TB2> INFO: test: Pretest no parameter change
[13:43:40.596] <TB2> INFO: running: pretest
[13:43:40.596] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[13:43:40.596] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[13:43:40.596] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[13:43:40.597] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[13:43:40.597] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[13:43:40.597] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[13:43:40.597] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[13:43:40.597] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[13:43:40.597] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[13:43:40.597] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[13:43:40.597] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[13:43:40.597] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[13:43:40.597] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[13:43:40.597] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[13:43:40.598] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[13:43:40.598] <TB2> INFO: write dac parameters into /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//010_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[13:43:40.598] <TB2> INFO: enter test to run
[13:43:40.598] <TB2> INFO: test: no parameter change
[13:43:40.791] <TB2> QUIET: Connection to board 162 closed.
[13:43:40.871] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[13:43:56.368] <TB2> INFO: *** Welcome to pxar ***
[13:43:56.368] <TB2> INFO: *** Today: 2015/08/28
[13:43:56.368] <TB2> INFO: readRocDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//011_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//011_HREfficiency_50//dacParameters35_C15.dat
[13:43:56.368] <TB2> INFO: readTbmDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//011_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//011_HREfficiency_50//tbmParameters_C0b.dat
[13:43:56.368] <TB2> INFO: readMaskFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//011_HREfficiency_50//defaultMaskFile.dat
[13:43:56.368] <TB2> INFO: readTrimFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//011_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//011_HREfficiency_50//trimParameters35_C15.dat
[13:43:56.438] <TB2> INFO: clk: 4
[13:43:56.438] <TB2> INFO: ctr: 4
[13:43:56.438] <TB2> INFO: sda: 19
[13:43:56.438] <TB2> INFO: tin: 9
[13:43:56.438] <TB2> INFO: level: 15
[13:43:56.438] <TB2> INFO: triggerdelay: 0
[13:43:56.438] <TB2> QUIET: Instanciating API for pxar v2.5+57~g44d0777
[13:43:56.438] <TB2> INFO: Log level: INFO
[13:43:56.452] <TB2> INFO: Found DTB DTB_WXENWR
[13:43:56.464] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[13:43:56.467] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[13:43:56.470] <TB2> INFO: RPC call hashes of host and DTB match: 397073690
[13:43:58.018] <TB2> INFO: DUT info:
[13:43:58.018] <TB2> INFO: The DUT currently contains the following objects:
[13:43:58.018] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[13:43:58.018] <TB2> INFO: TBM Core alpha (0): 7 registers set
[13:43:58.018] <TB2> INFO: TBM Core beta (1): 7 registers set
[13:43:58.018] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:43:58.018] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.019] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:43:58.420] <TB2> INFO: enter 'restricted' command line mode
[13:43:58.420] <TB2> INFO: enter test to run
[13:43:58.420] <TB2> INFO: test: HighRate no parameter change
[13:43:58.420] <TB2> INFO: running: highrate
[13:43:58.421] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//011_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//011_HREfficiency_50//phCalibrationFitErr35_C15.dat
[13:43:58.604] <TB2> INFO: ----------------------------------------------------------------------
[13:43:58.604] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[13:43:58.604] <TB2> INFO: ----------------------------------------------------------------------
[13:43:59.213] <TB2> INFO: Expecting 208000 events.
[13:44:10.671] <TB2> INFO: 208000 events read in total (10927ms).
[13:44:10.679] <TB2> INFO: Test took 12068ms.
[13:44:10.995] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:44:11.319] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 2 1 0 0 1 0 0 0 0 0 0 0 0
[13:44:11.319] <TB2> INFO: number of red-efficiency pixels: 131 145 141 275 366 506 412 545 443 472 397 345 299 205 129 130
[13:44:11.319] <TB2> INFO: number of X-ray hits detected: 105831 105296 101712 172286 206347 253075 229349 259837 247144 233430 231231 201412 185738 107061 106772 106665
[13:44:11.319] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[13:44:11.319] <TB2> INFO: number of Vcal hits detected: 207866 207851 207852 207609 207564 207446 207537 207355 207510 207498 207563 207631 207690 207777 207863 207868
[13:44:11.319] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.9 99.8 99.8 99.8 99.7 99.8 99.8 99.8 99.8 99.9 99.9 99.9 99.9
[13:44:11.319] <TB2> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.8 99.8 99.7 99.8 99.7 99.8 99.8 99.8 99.8 99.9 99.9 99.9 99.9
[13:44:11.319] <TB2> INFO: X-ray hit rate [MHz/cm2]: 31.0 30.9 29.8 50.5 60.5 74.2 67.2 76.2 72.4 68.4 67.8 59.0 54.4 31.4 31.3 31.3
[13:44:11.319] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[13:44:11.363] <TB2> INFO: PixTest:: pg_setup set to default.
[13:44:11.394] <TB2> INFO: enter test to run
[13:44:11.394] <TB2> INFO: test: no parameter change
[13:44:11.539] <TB2> QUIET: Connection to board 162 closed.
[13:44:11.619] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[13:44:24.936] <TB2> INFO: *** Welcome to pxar ***
[13:44:24.936] <TB2> INFO: *** Today: 2015/08/28
[13:44:24.936] <TB2> INFO: readRocDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//012_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//012_HREfficiency_100//dacParameters35_C15.dat
[13:44:24.937] <TB2> INFO: readTbmDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//012_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//012_HREfficiency_100//tbmParameters_C0b.dat
[13:44:24.938] <TB2> INFO: readMaskFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//012_HREfficiency_100//defaultMaskFile.dat
[13:44:24.938] <TB2> INFO: readTrimFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//012_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//012_HREfficiency_100//trimParameters35_C15.dat
[13:44:25.021] <TB2> INFO: clk: 4
[13:44:25.021] <TB2> INFO: ctr: 4
[13:44:25.021] <TB2> INFO: sda: 19
[13:44:25.021] <TB2> INFO: tin: 9
[13:44:25.021] <TB2> INFO: level: 15
[13:44:25.021] <TB2> INFO: triggerdelay: 0
[13:44:25.021] <TB2> QUIET: Instanciating API for pxar v2.5+57~g44d0777
[13:44:25.021] <TB2> INFO: Log level: INFO
[13:44:25.034] <TB2> INFO: Found DTB DTB_WXENWR
[13:44:25.046] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[13:44:25.050] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[13:44:25.053] <TB2> INFO: RPC call hashes of host and DTB match: 397073690
[13:44:26.594] <TB2> INFO: DUT info:
[13:44:26.594] <TB2> INFO: The DUT currently contains the following objects:
[13:44:26.594] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[13:44:26.594] <TB2> INFO: TBM Core alpha (0): 7 registers set
[13:44:26.594] <TB2> INFO: TBM Core beta (1): 7 registers set
[13:44:26.594] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:44:26.594] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.594] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:44:26.996] <TB2> INFO: enter 'restricted' command line mode
[13:44:26.996] <TB2> INFO: enter test to run
[13:44:26.996] <TB2> INFO: test: HighRate no parameter change
[13:44:26.996] <TB2> INFO: running: highrate
[13:44:26.996] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//012_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//012_HREfficiency_100//phCalibrationFitErr35_C15.dat
[13:44:27.217] <TB2> INFO: ----------------------------------------------------------------------
[13:44:27.217] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[13:44:27.217] <TB2> INFO: ----------------------------------------------------------------------
[13:44:27.868] <TB2> INFO: Expecting 208000 events.
[13:44:43.495] <TB2> INFO: 208000 events read in total (15096ms).
[13:44:43.505] <TB2> INFO: Test took 16281ms.
[13:44:44.105] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:44:44.518] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 2 1 0 0 1 0 0 0 0 0 0 0 0
[13:44:44.518] <TB2> INFO: number of red-efficiency pixels: 487 400 453 1020 1337 1899 1605 2104 1836 1688 1581 1277 1138 714 375 438
[13:44:44.518] <TB2> INFO: number of X-ray hits detected: 214134 214416 208534 347574 410163 495845 452922 514088 491959 462383 452965 400621 371245 219319 216971 214922
[13:44:44.518] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[13:44:44.518] <TB2> INFO: number of Vcal hits detected: 207466 207575 207439 206632 206029 204879 205547 204645 205372 205438 205648 206200 206551 206973 207598 207523
[13:44:44.518] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.8 99.8 99.8 99.5 99.2 98.7 99.0 98.6 98.8 98.9 99.0 99.3 99.4 99.6 99.8 99.8
[13:44:44.518] <TB2> INFO: Vcal hit overall efficiency (%): 99.7 99.8 99.7 99.3 99.1 98.5 98.8 98.4 98.7 98.8 98.9 99.1 99.3 99.5 99.8 99.8
[13:44:44.518] <TB2> INFO: X-ray hit rate [MHz/cm2]: 62.8 62.8 61.1 101.9 120.2 145.3 132.8 150.7 144.2 135.5 132.8 117.4 108.8 64.3 63.6 63.0
[13:44:44.518] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[13:44:44.563] <TB2> INFO: PixTest:: pg_setup set to default.
[13:44:44.596] <TB2> INFO: enter test to run
[13:44:44.596] <TB2> INFO: test: no parameter change
[13:44:44.730] <TB2> QUIET: Connection to board 162 closed.
[13:44:44.811] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[13:44:59.991] <TB2> INFO: *** Welcome to pxar ***
[13:44:59.991] <TB2> INFO: *** Today: 2015/08/28
[13:44:59.991] <TB2> INFO: readRocDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//013_HREfficiency_150//dacParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//013_HREfficiency_150//dacParameters35_C15.dat
[13:44:59.992] <TB2> INFO: readTbmDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//013_HREfficiency_150//tbmParameters_C0a.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//013_HREfficiency_150//tbmParameters_C0b.dat
[13:44:59.992] <TB2> INFO: readMaskFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//013_HREfficiency_150//defaultMaskFile.dat
[13:44:59.992] <TB2> INFO: readTrimFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//013_HREfficiency_150//trimParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//013_HREfficiency_150//trimParameters35_C15.dat
[13:45:00.062] <TB2> INFO: clk: 4
[13:45:00.062] <TB2> INFO: ctr: 4
[13:45:00.062] <TB2> INFO: sda: 19
[13:45:00.062] <TB2> INFO: tin: 9
[13:45:00.062] <TB2> INFO: level: 15
[13:45:00.062] <TB2> INFO: triggerdelay: 0
[13:45:00.062] <TB2> QUIET: Instanciating API for pxar v2.5+57~g44d0777
[13:45:00.062] <TB2> INFO: Log level: INFO
[13:45:00.075] <TB2> INFO: Found DTB DTB_WXENWR
[13:45:00.087] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[13:45:00.091] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[13:45:00.093] <TB2> INFO: RPC call hashes of host and DTB match: 397073690
[13:45:01.621] <TB2> INFO: DUT info:
[13:45:01.622] <TB2> INFO: The DUT currently contains the following objects:
[13:45:01.622] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[13:45:01.622] <TB2> INFO: TBM Core alpha (0): 7 registers set
[13:45:01.622] <TB2> INFO: TBM Core beta (1): 7 registers set
[13:45:01.622] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:45:01.622] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.622] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.622] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.622] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.622] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.622] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.622] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.622] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.622] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.622] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.622] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.622] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.622] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.623] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.623] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:01.623] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:02.024] <TB2> INFO: enter 'restricted' command line mode
[13:45:02.024] <TB2> INFO: enter test to run
[13:45:02.024] <TB2> INFO: test: HighRate no parameter change
[13:45:02.024] <TB2> INFO: running: highrate
[13:45:02.025] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//013_HREfficiency_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//013_HREfficiency_150//phCalibrationFitErr35_C15.dat
[13:45:02.169] <TB2> INFO: ----------------------------------------------------------------------
[13:45:02.169] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[13:45:02.169] <TB2> INFO: ----------------------------------------------------------------------
[13:45:02.776] <TB2> INFO: Expecting 208000 events.
[13:45:22.930] <TB2> INFO: 208000 events read in total (19622ms).
[13:45:22.943] <TB2> INFO: Test took 20767ms.
[13:45:23.784] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:45:24.280] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 2 1 0 0 1 0 0 0 0 0 0 0 0
[13:45:24.280] <TB2> INFO: number of red-efficiency pixels: 1016 828 879 1961 2544 3280 2918 3541 3273 2950 2945 2482 2132 1217 726 859
[13:45:24.280] <TB2> INFO: number of X-ray hits detected: 310645 311538 303409 496011 588937 710422 648560 737250 703332 661561 646643 573542 533477 319352 316085 311000
[13:45:24.280] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[13:45:24.280] <TB2> INFO: number of Vcal hits detected: 206787 207042 206483 204660 202613 198976 200850 198441 200061 200871 201403 203045 204200 205453 207164 206995
[13:45:24.280] <TB2> INFO: Vcal hit fiducial efficiency (%): 99.5 99.6 99.4 98.6 97.8 96.2 97.0 95.9 96.5 97.0 97.2 97.9 98.4 99.0 99.6 99.6
[13:45:24.280] <TB2> INFO: Vcal hit overall efficiency (%): 99.4 99.5 99.3 98.4 97.4 95.7 96.6 95.4 96.2 96.6 96.8 97.6 98.2 98.8 99.6 99.5
[13:45:24.280] <TB2> INFO: X-ray hit rate [MHz/cm2]: 91.1 91.3 88.9 145.4 172.6 208.2 190.1 216.1 206.2 193.9 189.5 168.1 156.4 93.6 92.6 91.2
[13:45:24.280] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[13:45:24.324] <TB2> INFO: PixTest:: pg_setup set to default.
[13:45:24.358] <TB2> INFO: enter test to run
[13:45:24.358] <TB2> INFO: test: no parameter change
[13:45:24.479] <TB2> QUIET: Connection to board 162 closed.
[13:45:24.558] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[13:45:39.347] <TB2> INFO: *** Welcome to pxar ***
[13:45:39.347] <TB2> INFO: *** Today: 2015/08/28
[13:45:39.347] <TB2> INFO: readRocDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//014_HREfficiency_200//dacParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//014_HREfficiency_200//dacParameters35_C15.dat
[13:45:39.348] <TB2> INFO: readTbmDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//014_HREfficiency_200//tbmParameters_C0a.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//014_HREfficiency_200//tbmParameters_C0b.dat
[13:45:39.348] <TB2> INFO: readMaskFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//014_HREfficiency_200//defaultMaskFile.dat
[13:45:39.348] <TB2> INFO: readTrimFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//014_HREfficiency_200//trimParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//014_HREfficiency_200//trimParameters35_C15.dat
[13:45:39.438] <TB2> INFO: clk: 4
[13:45:39.438] <TB2> INFO: ctr: 4
[13:45:39.438] <TB2> INFO: sda: 19
[13:45:39.438] <TB2> INFO: tin: 9
[13:45:39.438] <TB2> INFO: level: 15
[13:45:39.438] <TB2> INFO: triggerdelay: 0
[13:45:39.438] <TB2> QUIET: Instanciating API for pxar v2.5+57~g44d0777
[13:45:39.439] <TB2> INFO: Log level: INFO
[13:45:39.451] <TB2> INFO: Found DTB DTB_WXENWR
[13:45:39.463] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[13:45:39.467] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[13:45:39.470] <TB2> INFO: RPC call hashes of host and DTB match: 397073690
[13:45:41.039] <TB2> INFO: DUT info:
[13:45:41.039] <TB2> INFO: The DUT currently contains the following objects:
[13:45:41.039] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[13:45:41.039] <TB2> INFO: TBM Core alpha (0): 7 registers set
[13:45:41.039] <TB2> INFO: TBM Core beta (1): 7 registers set
[13:45:41.039] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:45:41.039] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.039] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.039] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.039] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.039] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.039] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.040] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.040] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.040] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.040] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.040] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.040] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.040] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.040] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.040] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.040] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:45:41.441] <TB2> INFO: enter 'restricted' command line mode
[13:45:41.441] <TB2> INFO: enter test to run
[13:45:41.441] <TB2> INFO: test: HighRate no parameter change
[13:45:41.441] <TB2> INFO: running: highrate
[13:45:41.442] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//014_HREfficiency_200//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//014_HREfficiency_200//phCalibrationFitErr35_C15.dat
[13:45:41.650] <TB2> INFO: ----------------------------------------------------------------------
[13:45:41.650] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[13:45:41.650] <TB2> INFO: ----------------------------------------------------------------------
[13:45:42.294] <TB2> INFO: Expecting 208000 events.
[13:46:08.598] <TB2> INFO: 206100 events read in total (25772ms).
[13:46:09.127] <TB2> INFO: 208000 events read in total (26301ms).
[13:46:09.148] <TB2> INFO: Test took 27491ms.
[13:46:10.266] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:46:10.853] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 2 1 0 0 1 0 0 0 0 0 0 0 0
[13:46:10.853] <TB2> INFO: number of red-efficiency pixels: 1801 1563 1380 3123 3616 4033 3852 4110 4042 3945 3891 3590 3363 1850 1427 1605
[13:46:10.853] <TB2> INFO: number of X-ray hits detected: 418898 423645 414036 668768 793788 948435 870213 992835 941447 892752 861856 774409 716374 433863 430859 422063
[13:46:10.853] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[13:46:10.853] <TB2> INFO: number of Vcal hits detected: 205350 205859 204580 200078 194873 187162 191179 184798 188653 190587 192365 196059 198716 202370 206129 205705
[13:46:10.853] <TB2> INFO: Vcal hit fiducial efficiency (%): 98.9 99.1 98.7 96.7 94.5 91.1 92.9 89.8 91.4 92.5 93.3 94.9 96.1 97.8 99.2 99.0
[13:46:10.853] <TB2> INFO: Vcal hit overall efficiency (%): 98.7 99.0 98.4 96.2 93.7 90.0 91.9 88.8 90.7 91.6 92.5 94.3 95.5 97.3 99.1 98.9
[13:46:10.853] <TB2> INFO: X-ray hit rate [MHz/cm2]: 122.8 124.2 121.4 196.0 232.7 278.0 255.1 291.0 275.9 261.7 252.6 227.0 210.0 127.2 126.3 123.7
[13:46:10.853] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[13:46:10.898] <TB2> INFO: PixTest:: pg_setup set to default.
[13:46:10.933] <TB2> INFO: enter test to run
[13:46:10.933] <TB2> INFO: test: no parameter change
[13:46:11.078] <TB2> QUIET: Connection to board 162 closed.
[13:46:11.159] <TB2> INFO: pXar: this is the end, my friend
commander_HREfficiency.log
[13:46:25.705] <TB2> INFO: *** Welcome to pxar ***
[13:46:25.705] <TB2> INFO: *** Today: 2015/08/28
[13:46:25.705] <TB2> INFO: readRocDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//015_HREfficiency_250//dacParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//015_HREfficiency_250//dacParameters35_C15.dat
[13:46:25.706] <TB2> INFO: readTbmDacs: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//015_HREfficiency_250//tbmParameters_C0a.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//015_HREfficiency_250//tbmParameters_C0b.dat
[13:46:25.706] <TB2> INFO: readMaskFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//015_HREfficiency_250//defaultMaskFile.dat
[13:46:25.706] <TB2> INFO: readTrimFile: /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//015_HREfficiency_250//trimParameters35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//015_HREfficiency_250//trimParameters35_C15.dat
[13:46:25.780] <TB2> INFO: clk: 4
[13:46:25.780] <TB2> INFO: ctr: 4
[13:46:25.780] <TB2> INFO: sda: 19
[13:46:25.780] <TB2> INFO: tin: 9
[13:46:25.780] <TB2> INFO: level: 15
[13:46:25.780] <TB2> INFO: triggerdelay: 0
[13:46:25.780] <TB2> QUIET: Instanciating API for pxar v2.5+57~g44d0777
[13:46:25.780] <TB2> INFO: Log level: INFO
[13:46:25.793] <TB2> INFO: Found DTB DTB_WXENWR
[13:46:25.805] <TB2> QUIET: Connection to board DTB_WXENWR opened.
[13:46:25.809] <TB2> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 162
HW version: DTB1.2
FW version: 4.2
SW version: 4.4
USB id: DTB_WXENWR
MAC address: 40D8551180A2
Hostname: pixelDTB162
Comment:
------------------------------------------------------
[13:46:25.811] <TB2> INFO: RPC call hashes of host and DTB match: 397073690
[13:46:27.348] <TB2> INFO: DUT info:
[13:46:27.348] <TB2> INFO: The DUT currently contains the following objects:
[13:46:27.348] <TB2> INFO: 2 TBM Cores tbm09c (2 ON)
[13:46:27.349] <TB2> INFO: TBM Core alpha (0): 7 registers set
[13:46:27.349] <TB2> INFO: TBM Core beta (1): 7 registers set
[13:46:27.349] <TB2> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[13:46:27.349] <TB2> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.349] <TB2> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[13:46:27.750] <TB2> INFO: enter 'restricted' command line mode
[13:46:27.750] <TB2> INFO: enter test to run
[13:46:27.750] <TB2> INFO: test: HighRate no parameter change
[13:46:27.750] <TB2> INFO: running: highrate
[13:46:27.751] <TB2> INFO: readGainPedestalParameters /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//015_HREfficiency_250//phCalibrationFitErr35_C0.dat .. /usr/local/data/M2080_XrayQualification_2015-08-28_14h28m_1440764917//015_HREfficiency_250//phCalibrationFitErr35_C15.dat
[13:46:27.887] <TB2> INFO: ----------------------------------------------------------------------
[13:46:27.887] <TB2> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[13:46:27.887] <TB2> INFO: ----------------------------------------------------------------------
[13:46:28.495] <TB2> INFO: Expecting 208000 events.
[13:46:55.489] <TB2> INFO: 202600 events read in total (26463ms).
[13:46:56.470] <TB2> INFO: 208000 events read in total (27444ms).
[13:46:56.486] <TB2> INFO: Test took 28592ms.
[13:46:57.651] <TB2> INFO: Fetched DAQ statistics. Counters are being reset now.
[13:46:58.244] <TB2> INFO: number of dead pixels (per ROC): 0 0 0 2 1 0 0 1 0 0 0 0 0 0 0 0
[13:46:58.244] <TB2> INFO: number of red-efficiency pixels: 1892 1650 1505 3236 3699 4083 3931 4135 4057 3971 3950 3664 3472 1911 1553 1626
[13:46:58.244] <TB2> INFO: number of X-ray hits detected: 429968 438845 430263 688414 813482 969097 891593 1020129 965730 914265 882392 790370 735976 449201 445632 433474
[13:46:58.244] <TB2> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[13:46:58.244] <TB2> INFO: number of Vcal hits detected: 205085 205717 204300 199663 194265 186085 189721 183357 187266 189290 191092 195381 198210 202066 205928 205624
[13:46:58.244] <TB2> INFO: Vcal hit fiducial efficiency (%): 98.8 99.0 98.6 96.5 94.2 90.5 92.1 89.1 90.8 92.0 92.7 94.6 95.9 97.6 99.1 99.0
[13:46:58.244] <TB2> INFO: Vcal hit overall efficiency (%): 98.6 98.9 98.2 96.0 93.4 89.5 91.2 88.2 90.0 91.0 91.9 93.9 95.3 97.1 99.0 98.9
[13:46:58.244] <TB2> INFO: X-ray hit rate [MHz/cm2]: 126.0 128.6 126.1 201.8 238.4 284.0 261.3 299.0 283.1 268.0 258.6 231.7 215.7 131.7 130.6 127.1
[13:46:58.244] <TB2> INFO: PixTestHighRate::doXPixelAlive() done
[13:46:58.288] <TB2> INFO: PixTest:: pg_setup set to default.
[13:46:58.323] <TB2> INFO: enter test to run
[13:46:58.323] <TB2> INFO: test: no parameter change
[13:46:58.477] <TB2> QUIET: Connection to board 162 closed.
[13:46:58.561] <TB2> INFO: pXar: this is the end, my friend