[09:14:09.619] <TB3> INFO: *** Welcome to pxar ***
[09:14:09.619] <TB3> INFO: *** Today: 2016/08/18
[09:14:09.704] <TB3> INFO: *** Version: f5d3-dirty
[09:14:09.704] <TB3> INFO: readRocDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//000_PixelAlive_p17//dacParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//000_PixelAlive_p17//dacParameters35_C15.dat
[09:14:09.706] <TB3> INFO: readTbmDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//000_PixelAlive_p17//tbmParameters_C0a.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//000_PixelAlive_p17//tbmParameters_C0b.dat
[09:14:09.706] <TB3> INFO: readMaskFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//000_PixelAlive_p17//defaultMaskFile.dat
[09:14:09.706] <TB3> INFO: readTrimFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//000_PixelAlive_p17//trimParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//000_PixelAlive_p17//trimParameters35_C15.dat
[09:14:09.781] <TB3> INFO: clk: 4
[09:14:09.781] <TB3> INFO: ctr: 4
[09:14:09.781] <TB3> INFO: sda: 19
[09:14:09.781] <TB3> INFO: tin: 9
[09:14:09.781] <TB3> INFO: level: 15
[09:14:09.781] <TB3> INFO: triggerdelay: 0
[09:14:09.781] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[09:14:09.781] <TB3> INFO: Log level: INFO
[09:14:09.794] <TB3> INFO: Found DTB DTB_WWV6Z5
[09:14:09.806] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[09:14:09.808] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[09:14:09.810] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[09:14:11.356] <TB3> INFO: DUT info:
[09:14:11.356] <TB3> INFO: The DUT currently contains the following objects:
[09:14:11.356] <TB3> INFO: 2 TBM Cores tbm08c (2 ON)
[09:14:11.356] <TB3> INFO: TBM Core alpha (0): 7 registers set
[09:14:11.356] <TB3> INFO: TBM Core beta (1): 7 registers set
[09:14:11.356] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:14:11.356] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.356] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.356] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.356] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.356] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.356] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.356] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.357] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.357] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.357] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.357] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.357] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.357] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.357] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.357] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.357] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:14:11.758] <TB3> INFO: enter 'restricted' command line mode
[09:14:11.758] <TB3> INFO: enter test to run
[09:14:11.758] <TB3> INFO: test: PixelAlive no parameter change
[09:14:11.758] <TB3> INFO: running: pixelalive
[09:14:11.761] <TB3> INFO: ######################################################################
[09:14:11.761] <TB3> INFO: PixTestAlive::doTest()
[09:14:11.762] <TB3> INFO: ######################################################################
[09:14:11.763] <TB3> INFO: ----------------------------------------------------------------------
[09:14:11.763] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:14:11.763] <TB3> INFO: ----------------------------------------------------------------------
[09:14:12.050] <TB3> INFO: Expecting 41600 events.
[09:14:15.405] <TB3> INFO: 41600 events read in total (2797ms).
[09:14:15.516] <TB3> INFO: Test took 3750ms.
[09:14:15.751] <TB3> INFO: PixTestAlive::aliveTest() done
[09:14:15.751] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0
[09:14:15.753] <TB3> INFO: ----------------------------------------------------------------------
[09:14:15.753] <TB3> INFO: PixTestAlive::maskTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:14:15.753] <TB3> INFO: ----------------------------------------------------------------------
[09:14:16.011] <TB3> INFO: Expecting 41600 events.
[09:14:18.590] <TB3> INFO: 41600 events read in total (2023ms).
[09:14:18.591] <TB3> INFO: Test took 2836ms.
[09:14:18.591] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[09:14:18.915] <TB3> INFO: PixTestAlive::maskTest() done
[09:14:18.915] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:14:18.917] <TB3> INFO: ----------------------------------------------------------------------
[09:14:18.917] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 10, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[09:14:18.917] <TB3> INFO: ----------------------------------------------------------------------
[09:14:19.174] <TB3> INFO: Expecting 41600 events.
[09:14:22.516] <TB3> INFO: 41600 events read in total (2786ms).
[09:14:22.517] <TB3> INFO: Test took 3598ms.
[09:14:22.827] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[09:14:22.827] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[09:14:22.827] <TB3> INFO: PixTestAlive::doTest() done, duration: 11 seconds
[09:14:22.857] <TB3> INFO: enter test to run
[09:14:22.857] <TB3> INFO: test: no parameter change
[09:14:23.122] <TB3> QUIET: Connection to board 121 closed.
[09:14:23.202] <TB3> INFO: pXar: this is the end, my friend

[09:19:12.700] <TB3> INFO: *** Welcome to pxar ***
[09:19:12.700] <TB3> INFO: *** Today: 2016/08/18
[09:19:12.762] <TB3> INFO: *** Version: f5d3-dirty
[09:19:12.762] <TB3> INFO: readRocDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//dacParameters35_C15.dat
[09:19:12.763] <TB3> INFO: readTbmDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[09:19:12.763] <TB3> INFO: readMaskFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//defaultMaskFile.dat
[09:19:12.763] <TB3> INFO: readTrimFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C15.dat
[09:19:12.845] <TB3> INFO: clk: 4
[09:19:12.845] <TB3> INFO: ctr: 4
[09:19:12.845] <TB3> INFO: sda: 19
[09:19:12.845] <TB3> INFO: tin: 9
[09:19:12.845] <TB3> INFO: level: 15
[09:19:12.845] <TB3> INFO: triggerdelay: 0
[09:19:12.845] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[09:19:12.845] <TB3> INFO: Log level: INFO
[09:19:12.858] <TB3> INFO: Found DTB DTB_WWV6Z5
[09:19:12.870] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[09:19:12.872] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[09:19:12.874] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[09:19:14.432] <TB3> INFO: DUT info:
[09:19:14.432] <TB3> INFO: The DUT currently contains the following objects:
[09:19:14.432] <TB3> INFO: 2 TBM Cores tbm08c (2 ON)
[09:19:14.432] <TB3> INFO: TBM Core alpha (0): 7 registers set
[09:19:14.432] <TB3> INFO: TBM Core beta (1): 7 registers set
[09:19:14.432] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:19:14.432] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.833] <TB3> INFO: enter 'restricted' command line mode
[09:19:14.833] <TB3> INFO: enter test to run
[09:19:14.833] <TB3> INFO: test: delay setting parameters: ->5<-
[09:19:14.833] <TB3> INFO: delay test by 5 seconds...
[09:19:19.833] <TB3> INFO: enter test to run
[09:19:19.833] <TB3> INFO: test: highrate no parameter change
[09:19:19.833] <TB3> INFO: running: highrate
[09:19:19.834] <TB3> INFO: readGainPedestalParameters /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[09:19:20.001] <TB3> INFO: ----------------------------------------------------------------------
[09:19:20.001] <TB3> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[09:19:20.001] <TB3> INFO: ----------------------------------------------------------------------
[09:19:20.001] <TB3> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[09:19:20.002] <TB3> INFO: edge/corner pixel THR is adjusted
[09:19:20.002] <TB3> INFO: PixTestHighRate::trimHotPixels: step 0...
[09:19:20.721] <TB3> INFO: Collecting data for 1 seconds...
[09:19:21.722] <TB3> INFO: Done with hot pixel readout


















[09:19:26.526] <TB3> INFO: PixTest:: pg_setup set to default.
[09:19:26.526] <TB3> INFO: 3 hot pixels found in step 0
[09:19:27.250] <TB3> INFO: Collecting data for 1 seconds...
[09:19:28.251] <TB3> INFO: Done with hot pixel readout


















[09:19:33.046] <TB3> INFO: PixTest:: pg_setup set to default.
[09:19:33.047] <TB3> INFO: 1 hot pixels found in step 1
[09:19:33.771] <TB3> INFO: Collecting data for 1 seconds...
[09:19:34.772] <TB3> INFO: Done with hot pixel readout


























[09:19:39.671] <TB3> INFO: PixTest:: pg_setup set to default.
[09:19:39.672] <TB3> INFO: 1 hot pixels found in step 2
[09:19:40.396] <TB3> INFO: Collecting data for 1 seconds...
[09:19:41.397] <TB3> INFO: Done with hot pixel readout
[09:19:46.784] <TB3> INFO: PixTest:: pg_setup set to default.
[09:19:46.785] <TB3> INFO: 1 hot pixels found in step 3
[09:19:47.507] <TB3> INFO: Collecting data for 1 seconds...
[09:19:48.509] <TB3> INFO: Done with hot pixel readout


























[09:19:53.828] <TB3> INFO: PixTest:: pg_setup set to default.
[09:19:53.829] <TB3> INFO: 0 hot pixels found in step 4
[09:19:53.837] <TB3> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[09:19:53.865] <TB3> INFO: PixTest::trimHotPixels() done
[09:19:53.865] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C0.dat
[09:19:53.872] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C1.dat
[09:19:53.878] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C2.dat
[09:19:53.885] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C3.dat
[09:19:53.891] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C4.dat
[09:19:53.898] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C5.dat
[09:19:53.904] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C6.dat
[09:19:53.910] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C7.dat
[09:19:53.917] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C8.dat
[09:19:53.923] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C9.dat
[09:19:53.930] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C10.dat
[09:19:53.936] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C11.dat
[09:19:53.942] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C12.dat
[09:19:53.949] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C13.dat
[09:19:53.956] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C14.dat
[09:19:53.962] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C15.dat
[09:19:53.969] <TB3> INFO: write masked pixels into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//defaultMaskFile.dat
[09:19:54.003] <TB3> INFO: enter test to run
[09:19:54.003] <TB3> INFO: test: no parameter change
[09:19:54.228] <TB3> QUIET: Connection to board 121 closed.
[09:19:54.308] <TB3> INFO: pXar: this is the end, my friend

[09:19:12.700] <TB3> INFO: *** Welcome to pxar ***
[09:19:12.700] <TB3> INFO: *** Today: 2016/08/18
[09:19:12.762] <TB3> INFO: *** Version: f5d3-dirty
[09:19:12.762] <TB3> INFO: readRocDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//dacParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//dacParameters35_C15.dat
[09:19:12.763] <TB3> INFO: readTbmDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//tbmParameters_C0a.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//tbmParameters_C0b.dat
[09:19:12.763] <TB3> INFO: readMaskFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//defaultMaskFile.dat
[09:19:12.763] <TB3> INFO: readTrimFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C15.dat
[09:19:12.845] <TB3> INFO: clk: 4
[09:19:12.845] <TB3> INFO: ctr: 4
[09:19:12.845] <TB3> INFO: sda: 19
[09:19:12.845] <TB3> INFO: tin: 9
[09:19:12.845] <TB3> INFO: level: 15
[09:19:12.845] <TB3> INFO: triggerdelay: 0
[09:19:12.845] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[09:19:12.845] <TB3> INFO: Log level: INFO
[09:19:12.858] <TB3> INFO: Found DTB DTB_WWV6Z5
[09:19:12.870] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[09:19:12.872] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[09:19:12.874] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[09:19:14.432] <TB3> INFO: DUT info:
[09:19:14.432] <TB3> INFO: The DUT currently contains the following objects:
[09:19:14.432] <TB3> INFO: 2 TBM Cores tbm08c (2 ON)
[09:19:14.432] <TB3> INFO: TBM Core alpha (0): 7 registers set
[09:19:14.432] <TB3> INFO: TBM Core beta (1): 7 registers set
[09:19:14.432] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:19:14.432] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.432] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:19:14.833] <TB3> INFO: enter 'restricted' command line mode
[09:19:14.833] <TB3> INFO: enter test to run
[09:19:14.833] <TB3> INFO: test: delay setting parameters: ->5<-
[09:19:14.833] <TB3> INFO: delay test by 5 seconds...
[09:19:19.833] <TB3> INFO: enter test to run
[09:19:19.833] <TB3> INFO: test: highrate no parameter change
[09:19:19.833] <TB3> INFO: running: highrate
[09:19:19.834] <TB3> INFO: readGainPedestalParameters /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//phCalibrationFitErr35_C15.dat
[09:19:20.001] <TB3> INFO: ----------------------------------------------------------------------
[09:19:20.001] <TB3> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[09:19:20.001] <TB3> INFO: ----------------------------------------------------------------------
[09:19:20.001] <TB3> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[09:19:20.002] <TB3> INFO: edge/corner pixel THR is adjusted
[09:19:20.002] <TB3> INFO: PixTestHighRate::trimHotPixels: step 0...
[09:19:20.721] <TB3> INFO: Collecting data for 1 seconds...
[09:19:21.722] <TB3> INFO: Done with hot pixel readout


















[09:19:26.526] <TB3> INFO: PixTest:: pg_setup set to default.
[09:19:26.526] <TB3> INFO: 3 hot pixels found in step 0
[09:19:27.250] <TB3> INFO: Collecting data for 1 seconds...
[09:19:28.251] <TB3> INFO: Done with hot pixel readout


















[09:19:33.046] <TB3> INFO: PixTest:: pg_setup set to default.
[09:19:33.047] <TB3> INFO: 1 hot pixels found in step 1
[09:19:33.771] <TB3> INFO: Collecting data for 1 seconds...
[09:19:34.772] <TB3> INFO: Done with hot pixel readout


























[09:19:39.671] <TB3> INFO: PixTest:: pg_setup set to default.
[09:19:39.672] <TB3> INFO: 1 hot pixels found in step 2
[09:19:40.396] <TB3> INFO: Collecting data for 1 seconds...
[09:19:41.397] <TB3> INFO: Done with hot pixel readout
[09:19:46.784] <TB3> INFO: PixTest:: pg_setup set to default.
[09:19:46.785] <TB3> INFO: 1 hot pixels found in step 3
[09:19:47.507] <TB3> INFO: Collecting data for 1 seconds...
[09:19:48.509] <TB3> INFO: Done with hot pixel readout


























[09:19:53.828] <TB3> INFO: PixTest:: pg_setup set to default.
[09:19:53.829] <TB3> INFO: 0 hot pixels found in step 4
[09:19:53.837] <TB3> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[09:19:53.865] <TB3> INFO: PixTest::trimHotPixels() done
[09:19:53.865] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C0.dat
[09:19:53.872] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C1.dat
[09:19:53.878] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C2.dat
[09:19:53.885] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C3.dat
[09:19:53.891] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C4.dat
[09:19:53.898] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C5.dat
[09:19:53.904] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C6.dat
[09:19:53.910] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C7.dat
[09:19:53.917] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C8.dat
[09:19:53.923] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C9.dat
[09:19:53.930] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C10.dat
[09:19:53.936] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C11.dat
[09:19:53.942] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C12.dat
[09:19:53.949] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C13.dat
[09:19:53.956] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C14.dat
[09:19:53.962] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//trimParameters35_C15.dat
[09:19:53.969] <TB3> INFO: write masked pixels into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//002_RetrimHotPixels_150//defaultMaskFile.dat
[09:19:54.003] <TB3> INFO: enter test to run
[09:19:54.003] <TB3> INFO: test: no parameter change
[09:19:54.228] <TB3> QUIET: Connection to board 121 closed.
[09:19:54.308] <TB3> INFO: pXar: this is the end, my friend
[09:21:29.392] <TB3> INFO: *** Welcome to pxar ***
[09:21:29.392] <TB3> INFO: *** Today: 2016/08/18
[09:21:29.461] <TB3> INFO: *** Version: f5d3-dirty
[09:21:29.461] <TB3> INFO: readRocDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//dacParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//dacParameters35_C15.dat
[09:21:29.461] <TB3> INFO: readTbmDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//tbmParameters_C0a.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//tbmParameters_C0b.dat
[09:21:29.462] <TB3> INFO: readMaskFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//defaultMaskFile.dat
[09:21:29.462] <TB3> INFO: readTrimFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C15.dat
[09:21:29.531] <TB3> INFO: clk: 4
[09:21:29.531] <TB3> INFO: ctr: 4
[09:21:29.531] <TB3> INFO: sda: 19
[09:21:29.531] <TB3> INFO: tin: 9
[09:21:29.531] <TB3> INFO: level: 15
[09:21:29.531] <TB3> INFO: triggerdelay: 0
[09:21:29.531] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[09:21:29.531] <TB3> INFO: Log level: INFO
[09:21:29.546] <TB3> INFO: Found DTB DTB_WWV6Z5
[09:21:29.557] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[09:21:29.559] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[09:21:29.561] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[09:21:31.123] <TB3> INFO: DUT info:
[09:21:31.123] <TB3> INFO: The DUT currently contains the following objects:
[09:21:31.123] <TB3> INFO: 2 TBM Cores tbm08c (2 ON)
[09:21:31.123] <TB3> INFO: TBM Core alpha (0): 7 registers set
[09:21:31.123] <TB3> INFO: TBM Core beta (1): 7 registers set
[09:21:31.123] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:21:31.123] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.123] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:21:31.524] <TB3> INFO: enter 'restricted' command line mode
[09:21:31.524] <TB3> INFO: enter test to run
[09:21:31.524] <TB3> INFO: test: delay setting parameters: ->5<-
[09:21:31.524] <TB3> INFO: delay test by 5 seconds...
[09:21:36.524] <TB3> INFO: enter test to run
[09:21:36.524] <TB3> INFO: test: highrate no parameter change
[09:21:36.524] <TB3> INFO: running: highrate
[09:21:36.524] <TB3> INFO: readGainPedestalParameters /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//phCalibrationFitErr35_C15.dat
[09:21:36.653] <TB3> INFO: ----------------------------------------------------------------------
[09:21:36.653] <TB3> INFO: PixTest::trimHotPixels() running for 1 seconds with 100 kHz trigger rate
[09:21:36.653] <TB3> INFO: ----------------------------------------------------------------------
[09:21:36.653] <TB3> INFO: THR = 200, corresponding to ~ 533.333 MHz/cm2
[09:21:36.653] <TB3> INFO: edge/corner pixel THR is adjusted
[09:21:36.653] <TB3> INFO: PixTestHighRate::trimHotPixels: step 0...
[09:21:37.373] <TB3> INFO: Collecting data for 1 seconds...
[09:21:38.375] <TB3> INFO: Done with hot pixel readout
[09:21:40.987] <TB3> INFO: PixTest:: pg_setup set to default.
[09:21:40.988] <TB3> INFO: 0 hot pixels found in step 0
[09:21:40.991] <TB3> INFO: In total 0 additional hot pixels could not be trimmed and have been masked.
[09:21:41.068] <TB3> INFO: PixTest::trimHotPixels() done
[09:21:41.069] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C0.dat
[09:21:41.075] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C1.dat
[09:21:41.081] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C2.dat
[09:21:41.088] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C3.dat
[09:21:41.094] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C4.dat
[09:21:41.100] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C5.dat
[09:21:41.106] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C6.dat
[09:21:41.113] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C7.dat
[09:21:41.119] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C8.dat
[09:21:41.125] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C9.dat
[09:21:41.132] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C10.dat
[09:21:41.138] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C11.dat
[09:21:41.144] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C12.dat
[09:21:41.150] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C13.dat
[09:21:41.157] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C14.dat
[09:21:41.163] <TB3> INFO: write trim parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//trimParameters35_C15.dat
[09:21:41.169] <TB3> INFO: write masked pixels into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//003_RetrimHotPixels_50//defaultMaskFile.dat
[09:21:41.201] <TB3> INFO: enter test to run
[09:21:41.201] <TB3> INFO: test: no parameter change
[09:21:41.407] <TB3> QUIET: Connection to board 121 closed.
[09:21:41.486] <TB3> INFO: pXar: this is the end, my friend

[09:22:34.335] <TB3> INFO: *** Welcome to pxar ***
[09:22:34.336] <TB3> INFO: *** Today: 2016/08/18
[09:22:34.427] <TB3> INFO: *** Version: f5d3-dirty
[09:22:34.427] <TB3> INFO: readRocDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//004_HRData_50//dacParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//004_HRData_50//dacParameters35_C15.dat
[09:22:34.428] <TB3> INFO: readTbmDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//004_HRData_50//tbmParameters_C0a.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//004_HRData_50//tbmParameters_C0b.dat
[09:22:34.428] <TB3> INFO: readMaskFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//004_HRData_50//defaultMaskFile.dat
[09:22:34.428] <TB3> INFO: readTrimFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//004_HRData_50//trimParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//004_HRData_50//trimParameters35_C15.dat
[09:22:34.511] <TB3> INFO: clk: 4
[09:22:34.511] <TB3> INFO: ctr: 4
[09:22:34.511] <TB3> INFO: sda: 19
[09:22:34.511] <TB3> INFO: tin: 9
[09:22:34.511] <TB3> INFO: level: 15
[09:22:34.511] <TB3> INFO: triggerdelay: 0
[09:22:34.511] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[09:22:34.511] <TB3> INFO: Log level: INFO
[09:22:34.524] <TB3> INFO: Found DTB DTB_WWV6Z5
[09:22:34.539] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[09:22:34.541] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[09:22:34.543] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[09:22:36.109] <TB3> INFO: DUT info:
[09:22:36.109] <TB3> INFO: The DUT currently contains the following objects:
[09:22:36.109] <TB3> INFO: 2 TBM Cores tbm08c (2 ON)
[09:22:36.109] <TB3> INFO: TBM Core alpha (0): 7 registers set
[09:22:36.109] <TB3> INFO: TBM Core beta (1): 7 registers set
[09:22:36.109] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:22:36.109] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.109] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:22:36.510] <TB3> INFO: enter 'restricted' command line mode
[09:22:36.510] <TB3> INFO: enter test to run
[09:22:36.510] <TB3> INFO: test: delay setting parameters: ->5<-
[09:22:36.510] <TB3> INFO: delay test by 5 seconds...
[09:22:41.510] <TB3> INFO: enter test to run
[09:22:41.510] <TB3> INFO: test: Xray no parameter change
[09:22:41.510] <TB3> INFO: running: xray
[09:22:41.510] <TB3> INFO: readGainPedestalParameters /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//004_HRData_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//004_HRData_50//phCalibrationFitErr35_C15.dat
[09:22:41.682] <TB3> INFO: ######################################################################
[09:22:41.683] <TB3> INFO: PixTestXray::doTest()
[09:22:41.683] <TB3> INFO: ######################################################################
[09:22:41.683] <TB3> INFO: ----------------------------------------------------------------------
[09:22:41.683] <TB3> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[09:22:41.683] <TB3> INFO: ----------------------------------------------------------------------
[09:22:42.407] <TB3> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[09:22:52.349] <TB3> INFO: run duration 9 seconds, buffer almost full (81%), pausing triggers.
[09:23:21.512] <TB3> INFO: Resuming triggers.
[09:23:31.462] <TB3> INFO: run duration 19 seconds, buffer almost full (81%), pausing triggers.
[09:24:00.389] <TB3> INFO: Resuming triggers.
[09:24:10.334] <TB3> INFO: run duration 29 seconds, buffer almost full (81%), pausing triggers.
[09:24:39.643] <TB3> INFO: Resuming triggers.
[09:24:49.597] <TB3> INFO: run duration 39 seconds, buffer almost full (81%), pausing triggers.
[09:25:18.772] <TB3> INFO: Resuming triggers.
[09:25:28.725] <TB3> INFO: run duration 49 seconds, buffer almost full (81%), pausing triggers.


























[09:25:58.261] <TB3> INFO: Resuming triggers.
[09:26:08.213] <TB3> INFO: run duration 59 seconds, buffer almost full (81%), pausing triggers.


























[09:26:37.704] <TB3> INFO: Resuming triggers.
[09:26:47.650] <TB3> INFO: run duration 69 seconds, buffer almost full (81%), pausing triggers.
[09:27:16.805] <TB3> INFO: Resuming triggers.
[09:27:26.752] <TB3> INFO: run duration 79 seconds, buffer almost full (81%), pausing triggers.


























[09:27:55.798] <TB3> INFO: Resuming triggers.
[09:28:05.751] <TB3> INFO: run duration 89 seconds, buffer almost full (81%), pausing triggers.
[09:28:35.281] <TB3> INFO: Resuming triggers.
[09:28:45.233] <TB3> INFO: run duration 99 seconds, buffer almost full (81%), pausing triggers.
[09:29:13.252] <TB3> INFO: Resuming triggers.
[09:29:13.860] <TB3> INFO: data taking finished, elapsed time: 100 seconds.
[09:29:15.864] <TB3> INFO: PixTest:: pg_setup set to default.
[09:29:15.865] <TB3> INFO: PixTestXray::doPhRun() done
[09:29:15.865] <TB3> INFO: PixTestXray::doTest() done
[09:29:16.040] <TB3> INFO: enter test to run
[09:29:16.040] <TB3> INFO: test: no parameter change
[09:29:16.315] <TB3> QUIET: Connection to board 121 closed.
[09:29:16.678] <TB3> INFO: pXar: this is the end, my friend

[09:30:35.415] <TB3> INFO: *** Welcome to pxar ***
[09:30:35.415] <TB3> INFO: *** Today: 2016/08/18
[09:30:35.482] <TB3> INFO: *** Version: f5d3-dirty
[09:30:35.482] <TB3> INFO: readRocDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//005_HRData_150//dacParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//005_HRData_150//dacParameters35_C15.dat
[09:30:35.483] <TB3> INFO: readTbmDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//005_HRData_150//tbmParameters_C0a.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//005_HRData_150//tbmParameters_C0b.dat
[09:30:35.483] <TB3> INFO: readMaskFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//005_HRData_150//defaultMaskFile.dat
[09:30:35.483] <TB3> INFO: readTrimFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//005_HRData_150//trimParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//005_HRData_150//trimParameters35_C15.dat
[09:30:35.563] <TB3> INFO: clk: 4
[09:30:35.563] <TB3> INFO: ctr: 4
[09:30:35.563] <TB3> INFO: sda: 19
[09:30:35.564] <TB3> INFO: tin: 9
[09:30:35.564] <TB3> INFO: level: 15
[09:30:35.564] <TB3> INFO: triggerdelay: 0
[09:30:35.564] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[09:30:35.564] <TB3> INFO: Log level: INFO
[09:30:35.576] <TB3> INFO: Found DTB DTB_WWV6Z5
[09:30:35.587] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[09:30:35.589] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[09:30:35.591] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[09:30:37.149] <TB3> INFO: DUT info:
[09:30:37.149] <TB3> INFO: The DUT currently contains the following objects:
[09:30:37.149] <TB3> INFO: 2 TBM Cores tbm08c (2 ON)
[09:30:37.149] <TB3> INFO: TBM Core alpha (0): 7 registers set
[09:30:37.149] <TB3> INFO: TBM Core beta (1): 7 registers set
[09:30:37.149] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:30:37.149] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.149] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:30:37.550] <TB3> INFO: enter 'restricted' command line mode
[09:30:37.550] <TB3> INFO: enter test to run
[09:30:37.550] <TB3> INFO: test: delay setting parameters: ->5<-
[09:30:37.550] <TB3> INFO: delay test by 5 seconds...
[09:30:42.550] <TB3> INFO: enter test to run
[09:30:42.550] <TB3> INFO: test: Xray no parameter change
[09:30:42.550] <TB3> INFO: running: xray
[09:30:42.551] <TB3> INFO: readGainPedestalParameters /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//005_HRData_150//phCalibrationFitErr35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//005_HRData_150//phCalibrationFitErr35_C15.dat
[09:30:42.716] <TB3> INFO: ######################################################################
[09:30:42.717] <TB3> INFO: PixTestXray::doTest()
[09:30:42.717] <TB3> INFO: ######################################################################
[09:30:42.717] <TB3> INFO: ----------------------------------------------------------------------
[09:30:42.717] <TB3> INFO: PixTestXray::doPhRun() fParRunSeconds = 100
[09:30:42.717] <TB3> INFO: ----------------------------------------------------------------------
[09:30:43.444] <TB3> INFO: PixTestXray::doPhRun start TriggerLoop with trigger frequency 100 kHz, period 405 and duration 100 seconds, fEventsMax = 10000000
[09:30:48.474] <TB3> INFO: run duration 5 seconds, buffer almost full (81%), pausing triggers.
















































































































































































[09:31:19.538] <TB3> INFO: Resuming triggers.
[09:31:24.574] <TB3> INFO: run duration 10 seconds, buffer almost full (81%), pausing triggers.






































































[09:31:56.497] <TB3> INFO: Resuming triggers.
[09:32:01.534] <TB3> INFO: run duration 15 seconds, buffer almost full (81%), pausing triggers.






























































[09:32:32.278] <TB3> INFO: Resuming triggers.
[09:32:37.314] <TB3> INFO: run duration 20 seconds, buffer almost full (81%), pausing triggers.




























































































































































[09:33:08.240] <TB3> INFO: Resuming triggers.
[09:33:13.276] <TB3> INFO: run duration 25 seconds, buffer almost full (81%), pausing triggers.




















































[09:33:43.823] <TB3> INFO: Resuming triggers.
[09:33:48.858] <TB3> INFO: run duration 30 seconds, buffer almost full (81%), pausing triggers.




















































[09:34:19.296] <TB3> INFO: Resuming triggers.
[09:34:24.334] <TB3> INFO: run duration 35 seconds, buffer almost full (81%), pausing triggers.






































































[09:34:54.796] <TB3> INFO: Resuming triggers.
[09:34:59.834] <TB3> INFO: run duration 40 seconds, buffer almost full (81%), pausing triggers.




















































[09:35:31.663] <TB3> INFO: Resuming triggers.
[09:35:36.701] <TB3> INFO: run duration 45 seconds, buffer almost full (81%), pausing triggers.














































































[09:36:07.359] <TB3> INFO: Resuming triggers.
[09:36:12.396] <TB3> INFO: run duration 50 seconds, buffer almost full (81%), pausing triggers.




















































[09:36:43.005] <TB3> INFO: Resuming triggers.
[09:36:48.038] <TB3> INFO: run duration 55 seconds, buffer almost full (81%), pausing triggers.


































































































































































































































[09:37:18.974] <TB3> INFO: Resuming triggers.
[09:37:24.009] <TB3> INFO: run duration 60 seconds, buffer almost full (81%), pausing triggers.






























































[09:37:55.269] <TB3> INFO: Resuming triggers.
[09:38:00.302] <TB3> INFO: run duration 65 seconds, buffer almost full (81%), pausing triggers.


















































































































[09:38:31.360] <TB3> INFO: Resuming triggers.
[09:38:36.393] <TB3> INFO: run duration 70 seconds, buffer almost full (81%), pausing triggers.


























































































































[09:39:07.451] <TB3> INFO: Resuming triggers.
[09:39:12.487] <TB3> INFO: run duration 75 seconds, buffer almost full (81%), pausing triggers.



































































[09:39:41.515] <TB3> INFO: Resuming triggers.
[09:39:46.554] <TB3> INFO: run duration 80 seconds, buffer almost full (81%), pausing triggers.




































































































[09:40:16.257] <TB3> INFO: Resuming triggers.
[09:40:21.291] <TB3> INFO: run duration 85 seconds, buffer almost full (81%), pausing triggers.




















[09:40:50.269] <TB3> INFO: Resuming triggers.
[09:40:55.302] <TB3> INFO: run duration 90 seconds, buffer almost full (81%), pausing triggers.




















[09:41:24.857] <TB3> INFO: Resuming triggers.
[09:41:29.891] <TB3> INFO: run duration 95 seconds, buffer almost full (81%), pausing triggers.






























[09:41:59.880] <TB3> INFO: Resuming triggers.
[09:42:04.309] <TB3> INFO: data taking finished, elapsed time: 100 seconds.








































[09:42:29.797] <TB3> INFO: PixTest:: pg_setup set to default.
[09:42:29.798] <TB3> INFO: PixTestXray::doPhRun() done
[09:42:29.798] <TB3> INFO: PixTestXray::doTest() done
[09:42:29.994] <TB3> INFO: enter test to run
[09:42:29.994] <TB3> INFO: test: no parameter change
[09:42:30.246] <TB3> QUIET: Connection to board 121 closed.
[09:42:30.330] <TB3> INFO: pXar: this is the end, my friend

[09:45:58.983] <TB3> INFO: *** Welcome to pxar ***
[09:45:58.983] <TB3> INFO: *** Today: 2016/08/18
[09:45:59.048] <TB3> INFO: *** Version: f5d3-dirty
[09:45:59.049] <TB3> INFO: readRocDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//006_HRSCurves_100//dacParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//006_HRSCurves_100//dacParameters35_C15.dat
[09:45:59.049] <TB3> INFO: readTbmDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//006_HRSCurves_100//tbmParameters_C0a.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//006_HRSCurves_100//tbmParameters_C0b.dat
[09:45:59.049] <TB3> INFO: readMaskFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//006_HRSCurves_100//defaultMaskFile.dat
[09:45:59.049] <TB3> INFO: readTrimFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//006_HRSCurves_100//trimParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//006_HRSCurves_100//trimParameters35_C15.dat
[09:45:59.120] <TB3> INFO: clk: 4
[09:45:59.120] <TB3> INFO: ctr: 4
[09:45:59.120] <TB3> INFO: sda: 19
[09:45:59.120] <TB3> INFO: tin: 9
[09:45:59.120] <TB3> INFO: level: 15
[09:45:59.120] <TB3> INFO: triggerdelay: 0
[09:45:59.120] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[09:45:59.120] <TB3> INFO: Log level: INFO
[09:45:59.134] <TB3> INFO: Found DTB DTB_WWV6Z5
[09:45:59.146] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[09:45:59.147] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[09:45:59.149] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[09:46:00.705] <TB3> INFO: DUT info:
[09:46:00.705] <TB3> INFO: The DUT currently contains the following objects:
[09:46:00.705] <TB3> INFO: 2 TBM Cores tbm08c (2 ON)
[09:46:00.705] <TB3> INFO: TBM Core alpha (0): 7 registers set
[09:46:00.705] <TB3> INFO: TBM Core beta (1): 7 registers set
[09:46:00.705] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[09:46:00.705] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.705] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.705] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.705] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.705] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.705] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.705] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.705] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.705] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.705] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.705] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.705] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.705] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.705] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.706] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:00.706] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[09:46:01.106] <TB3> INFO: enter 'restricted' command line mode
[09:46:01.106] <TB3> INFO: enter test to run
[09:46:01.106] <TB3> INFO: test: Highrate no parameter change
[09:46:01.106] <TB3> INFO: running: highrate
[09:46:01.107] <TB3> INFO: readGainPedestalParameters /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//006_HRSCurves_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//006_HRSCurves_100//phCalibrationFitErr35_C15.dat
[09:46:01.271] <TB3> INFO: ----------------------------------------------------------------------
[09:46:01.271] <TB3> INFO: PixTestHighRate::xNoiseMaps() ntrig = 50, vcal = 200
[09:46:01.271] <TB3> INFO: ----------------------------------------------------------------------
[09:46:01.278] <TB3> INFO: ---> dac: vcal name: xNoiseMap ntrig: 50 dacrange: 15 .. 75 (20/-1) hits flags = 896 (plus default)
[09:46:01.361] <TB3> INFO: dacScan step from 15 .. 34
[09:46:01.361] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[09:46:01.361] <TB3> INFO: run 1 of 1
[09:46:01.845] <TB3> INFO: Expecting 4160000 events.
































































































[09:46:37.629] <TB3> INFO: 664550 events read in total (35381ms).


























[09:47:13.434] <TB3> INFO: 1330100 events read in total (71186ms).
[09:47:48.907] <TB3> INFO: 1995450 events read in total (106659ms).




















































[09:48:24.527] <TB3> INFO: 2660750 events read in total (142279ms).
































































































[09:49:00.185] <TB3> INFO: 3324950 events read in total (177937ms).


































































































































[09:49:35.677] <TB3> INFO: 3988600 events read in total (213429ms).
[09:49:45.309] <TB3> INFO: 4160000 events read in total (223061ms).
[09:49:45.448] <TB3> INFO: Test took 224087ms.
[09:49:51.955] <TB3> INFO: dacScan step from 35 .. 54
[09:49:51.955] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[09:49:51.955] <TB3> INFO: run 1 of 1
[09:49:52.460] <TB3> INFO: Expecting 4160000 events.














































































[09:50:26.052] <TB3> INFO: 498850 events read in total (33187ms).
[09:50:58.652] <TB3> INFO: 997550 events read in total (65787ms).
































































































[09:51:31.273] <TB3> INFO: 1495250 events read in total (98408ms).
































































































[09:52:03.863] <TB3> INFO: 1990800 events read in total (130998ms).






































































[09:52:36.545] <TB3> INFO: 2482800 events read in total (163680ms).






































































[09:53:09.340] <TB3> INFO: 2970850 events read in total (196475ms).














































































[09:53:42.096] <TB3> INFO: 3453950 events read in total (229231ms).


























[09:54:14.320] <TB3> INFO: 3934250 events read in total (261455ms).












































[09:54:29.786] <TB3> INFO: 4160000 events read in total (276921ms).
[09:54:29.927] <TB3> INFO: Test took 277971ms.
[09:54:36.086] <TB3> INFO: dacScan step from 55 .. 74
[09:54:36.086] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[09:54:36.086] <TB3> INFO: run 1 of 1
[09:54:36.568] <TB3> INFO: Expecting 4160000 events.












































[09:55:08.034] <TB3> INFO: 442400 events read in total (31065ms).














































































[09:55:39.593] <TB3> INFO: 884950 events read in total (62623ms).


















































































































[09:56:11.212] <TB3> INFO: 1327850 events read in total (94242ms).
































































































[09:56:42.900] <TB3> INFO: 1770900 events read in total (125930ms).







































































[09:57:13.348] <TB3> INFO: 2213650 events read in total (156378ms).




















[09:57:43.048] <TB3> INFO: 2656550 events read in total (186078ms).






























[09:58:12.672] <TB3> INFO: 3099250 events read in total (215702ms).










[09:58:42.179] <TB3> INFO: 3542000 events read in total (245209ms).










[09:59:11.545] <TB3> INFO: 3984800 events read in total (274575ms).
[09:59:23.330] <TB3> INFO: 4160000 events read in total (286360ms).
[09:59:23.573] <TB3> INFO: Test took 287487ms.
[09:59:29.351] <TB3> INFO: dacScan step from 75 .. 75
[09:59:29.351] <TB3> INFO: dacScan split into 1 runs with ntrig = 50
[09:59:29.351] <TB3> INFO: run 1 of 1
[09:59:29.833] <TB3> INFO: Expecting 208000 events.
[09:59:45.002] <TB3> INFO: 208000 events read in total (14768ms).
[09:59:45.009] <TB3> INFO: Test took 15658ms.
[09:59:45.336] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:59:46.452] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:59:47.525] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:59:48.740] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:59:49.858] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:59:50.911] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:59:51.978] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:59:53.044] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:59:54.142] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:59:55.226] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:59:56.320] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:59:57.378] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:59:58.429] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[09:59:59.511] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[10:00:00.606] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[10:00:01.855] <TB3> INFO: dumping ASCII scurve output file: XSCurveData
[10:00:02.945] <TB3> INFO: PixTest:: pg_setup set to default.
[10:00:02.947] <TB3> INFO: vcal mean: 37.55 37.94 37.47 39.68 39.43 40.05 40.83 40.32 40.75 40.60 40.89 40.67 40.11 38.05 38.92 37.92
[10:00:02.947] <TB3> INFO: vcal RMS: 1.11 1.09 0.94 1.32 1.21 1.27 1.32 1.33 1.36 1.35 1.36 1.33 1.14 1.11 1.13 1.09
[10:00:02.947] <TB3> INFO: number of X-ray hits detected: 153286 165020 144150 251184 251693 299428 285535 283599 312598 329022 338398 291295 272265 165602 185739 175229
[10:00:02.947] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:00:02.947] <TB3> INFO: X-ray hit rate [MHz/cm2]: 44.9 48.4 42.3 73.6 73.8 87.8 83.7 83.1 91.6 96.4 99.2 85.4 79.8 48.5 54.4 51.4
[10:00:02.947] <TB3> INFO: PixTestHighRate::doXNoiseMaps() done
[10:00:03.047] <TB3> INFO: enter test to run
[10:00:03.047] <TB3> INFO: test: no parameter change
[10:00:03.301] <TB3> QUIET: Connection to board 121 closed.
[10:00:03.381] <TB3> INFO: pXar: this is the end, my friend

[10:20:25.382] <TB3> INFO: *** Welcome to pxar ***
[10:20:25.382] <TB3> INFO: *** Today: 2016/08/18
[10:20:25.448] <TB3> INFO: *** Version: f5d3-dirty
[10:20:25.448] <TB3> INFO: readRocDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[10:20:25.449] <TB3> INFO: readTbmDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0a.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//tbmParameters_C0b.dat
[10:20:25.449] <TB3> INFO: readMaskFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//defaultMaskFile.dat
[10:20:25.449] <TB3> INFO: readTrimFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//trimParameters35_C15.dat
[10:20:25.537] <TB3> INFO: clk: 4
[10:20:25.537] <TB3> INFO: ctr: 4
[10:20:25.537] <TB3> INFO: sda: 19
[10:20:25.537] <TB3> INFO: tin: 9
[10:20:25.537] <TB3> INFO: level: 15
[10:20:25.537] <TB3> INFO: triggerdelay: 0
[10:20:25.537] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:20:25.537] <TB3> INFO: Log level: INFO
[10:20:25.550] <TB3> INFO: Found DTB DTB_WWV6Z5
[10:20:25.562] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[10:20:25.564] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[10:20:25.566] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[10:20:27.108] <TB3> INFO: DUT info:
[10:20:27.108] <TB3> INFO: The DUT currently contains the following objects:
[10:20:27.108] <TB3> INFO: 2 TBM Cores tbm08c (2 ON)
[10:20:27.108] <TB3> INFO: TBM Core alpha (0): 7 registers set
[10:20:27.108] <TB3> INFO: TBM Core beta (1): 7 registers set
[10:20:27.108] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:20:27.108] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.108] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.108] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.108] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.108] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.108] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.108] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.108] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.108] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.108] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.108] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.108] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.108] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.109] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.109] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.109] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:20:27.510] <TB3> INFO: enter 'restricted' command line mode
[10:20:27.510] <TB3> INFO: enter test to run
[10:20:27.510] <TB3> INFO: test: HighRate no parameter change
[10:20:27.510] <TB3> INFO: running: highrate
[10:20:27.510] <TB3> INFO: readGainPedestalParameters /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//phCalibrationFitErr35_C15.dat
[10:20:27.645] <TB3> INFO: ----------------------------------------------------------------------
[10:20:27.645] <TB3> INFO: PixTestHighRate::calDelScan() ntrig = 10, vcal = 200
[10:20:27.645] <TB3> INFO: ----------------------------------------------------------------------
[10:20:27.740] <TB3> INFO: Expecting 768 events.
[10:20:28.635] <TB3> INFO: 768 events read in total (337ms).
[10:20:28.761] <TB3> INFO: Test took 1111ms.
[10:20:29.272] <TB3> INFO: Expecting 41600 events.
[10:20:31.999] <TB3> INFO: 41600 events read in total (2325ms).
[10:20:32.000] <TB3> INFO: Test took 3233ms.
[10:20:32.577] <TB3> INFO: Expecting 41600 events.
[10:20:35.365] <TB3> INFO: 41600 events read in total (2387ms).
[10:20:35.366] <TB3> INFO: Test took 3299ms.
[10:20:35.921] <TB3> INFO: Expecting 41600 events.
[10:20:38.765] <TB3> INFO: 41600 events read in total (2442ms).
[10:20:38.766] <TB3> INFO: Test took 3338ms.
[10:20:39.340] <TB3> INFO: Expecting 41600 events.
[10:20:42.255] <TB3> INFO: 41600 events read in total (2513ms).
[10:20:42.256] <TB3> INFO: Test took 3423ms.
[10:20:42.829] <TB3> INFO: Expecting 41600 events.
[10:20:45.667] <TB3> INFO: 41600 events read in total (2436ms).
[10:20:45.669] <TB3> INFO: Test took 3344ms.
[10:20:46.241] <TB3> INFO: Expecting 41600 events.
[10:20:49.140] <TB3> INFO: 41600 events read in total (2498ms).
[10:20:49.141] <TB3> INFO: Test took 3406ms.
[10:20:49.715] <TB3> INFO: Expecting 41600 events.
[10:20:52.605] <TB3> INFO: 41600 events read in total (2489ms).
[10:20:52.606] <TB3> INFO: Test took 3402ms.
[10:20:53.169] <TB3> INFO: Expecting 41600 events.
[10:20:56.040] <TB3> INFO: 41600 events read in total (2470ms).
[10:20:56.041] <TB3> INFO: Test took 3368ms.
[10:20:56.590] <TB3> INFO: Expecting 41600 events.
[10:20:59.502] <TB3> INFO: 41600 events read in total (2510ms).
[10:20:59.503] <TB3> INFO: Test took 3399ms.
[10:21:00.075] <TB3> INFO: Expecting 41600 events.
[10:21:02.953] <TB3> INFO: 41600 events read in total (2476ms).
[10:21:02.955] <TB3> INFO: Test took 3386ms.
[10:21:03.527] <TB3> INFO: Expecting 41600 events.
[10:21:06.369] <TB3> INFO: 41600 events read in total (2441ms).
[10:21:06.370] <TB3> INFO: Test took 3354ms.
[10:21:06.912] <TB3> INFO: Expecting 41600 events.
[10:21:09.825] <TB3> INFO: 41600 events read in total (2512ms).
[10:21:09.826] <TB3> INFO: Test took 3396ms.
[10:21:10.382] <TB3> INFO: Expecting 41600 events.
[10:21:13.286] <TB3> INFO: 41600 events read in total (2503ms).
[10:21:13.288] <TB3> INFO: Test took 3400ms.
[10:21:13.856] <TB3> INFO: Expecting 41600 events.
[10:21:16.658] <TB3> INFO: 41600 events read in total (2401ms).
[10:21:16.659] <TB3> INFO: Test took 3300ms.
[10:21:17.203] <TB3> INFO: Expecting 41600 events.
[10:21:20.135] <TB3> INFO: 41600 events read in total (2530ms).
[10:21:20.136] <TB3> INFO: Test took 3419ms.
[10:21:20.673] <TB3> INFO: Expecting 41600 events.
[10:21:23.731] <TB3> INFO: 41600 events read in total (2656ms).
[10:21:23.732] <TB3> INFO: Test took 3538ms.
[10:21:24.311] <TB3> INFO: Expecting 41600 events.
[10:21:27.357] <TB3> INFO: 41600 events read in total (2645ms).
[10:21:27.358] <TB3> INFO: Test took 3550ms.
[10:21:27.923] <TB3> INFO: Expecting 41600 events.
[10:21:30.743] <TB3> INFO: 41600 events read in total (2419ms).
[10:21:30.743] <TB3> INFO: Test took 3319ms.
[10:21:31.290] <TB3> INFO: Expecting 41600 events.
[10:21:34.021] <TB3> INFO: 41600 events read in total (2330ms).
[10:21:34.022] <TB3> INFO: Test took 3221ms.
[10:21:34.569] <TB3> INFO: Expecting 41600 events.
[10:21:37.198] <TB3> INFO: 41600 events read in total (2228ms).
[10:21:37.199] <TB3> INFO: Test took 3121ms.
[10:21:37.540] <TB3> INFO: enter test to run
[10:21:37.540] <TB3> INFO: test: Pretest no parameter change
[10:21:37.540] <TB3> INFO: running: pretest
[10:21:37.541] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C0.dat
[10:21:37.541] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C1.dat
[10:21:37.541] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C2.dat
[10:21:37.541] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C3.dat
[10:21:37.541] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C4.dat
[10:21:37.541] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C5.dat
[10:21:37.541] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C6.dat
[10:21:37.541] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C7.dat
[10:21:37.541] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C8.dat
[10:21:37.542] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C9.dat
[10:21:37.542] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C10.dat
[10:21:37.542] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C11.dat
[10:21:37.542] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C12.dat
[10:21:37.542] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C13.dat
[10:21:37.542] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C14.dat
[10:21:37.542] <TB3> INFO: write dac parameters into /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//011_CalDelScanAndSaveDacs_4mA25kV//dacParameters35_C15.dat
[10:21:37.542] <TB3> INFO: enter test to run
[10:21:37.542] <TB3> INFO: test: no parameter change
[10:21:37.777] <TB3> QUIET: Connection to board 121 closed.
[10:21:37.841] <TB3> INFO: pXar: this is the end, my friend

[10:22:24.920] <TB3> INFO: *** Welcome to pxar ***
[10:22:24.920] <TB3> INFO: *** Today: 2016/08/18
[10:22:24.995] <TB3> INFO: *** Version: f5d3-dirty
[10:22:24.995] <TB3> INFO: readRocDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//012_HREfficiency_50//dacParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//012_HREfficiency_50//dacParameters35_C15.dat
[10:22:24.996] <TB3> INFO: readTbmDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//012_HREfficiency_50//tbmParameters_C0a.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//012_HREfficiency_50//tbmParameters_C0b.dat
[10:22:24.996] <TB3> INFO: readMaskFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//012_HREfficiency_50//defaultMaskFile.dat
[10:22:24.996] <TB3> INFO: readTrimFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//012_HREfficiency_50//trimParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//012_HREfficiency_50//trimParameters35_C15.dat
[10:22:25.068] <TB3> INFO: clk: 4
[10:22:25.068] <TB3> INFO: ctr: 4
[10:22:25.068] <TB3> INFO: sda: 19
[10:22:25.068] <TB3> INFO: tin: 9
[10:22:25.068] <TB3> INFO: level: 15
[10:22:25.068] <TB3> INFO: triggerdelay: 0
[10:22:25.068] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:22:25.068] <TB3> INFO: Log level: INFO
[10:22:25.081] <TB3> INFO: Found DTB DTB_WWV6Z5
[10:22:25.092] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[10:22:25.094] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[10:22:25.096] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[10:22:26.651] <TB3> INFO: DUT info:
[10:22:26.651] <TB3> INFO: The DUT currently contains the following objects:
[10:22:26.651] <TB3> INFO: 2 TBM Cores tbm08c (2 ON)
[10:22:26.651] <TB3> INFO: TBM Core alpha (0): 7 registers set
[10:22:26.651] <TB3> INFO: TBM Core beta (1): 7 registers set
[10:22:26.651] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:22:26.651] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.651] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.651] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.651] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.651] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.651] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.651] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.651] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.651] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.651] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.652] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.652] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.652] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.652] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.652] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:26.652] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:22:27.053] <TB3> INFO: enter 'restricted' command line mode
[10:22:27.053] <TB3> INFO: enter test to run
[10:22:27.053] <TB3> INFO: test: PixelAlive no parameter change
[10:22:27.053] <TB3> INFO: running: pixelalive
[10:22:27.056] <TB3> INFO: ######################################################################
[10:22:27.056] <TB3> INFO: PixTestAlive::doTest()
[10:22:27.056] <TB3> INFO: ######################################################################
[10:22:27.058] <TB3> INFO: ----------------------------------------------------------------------
[10:22:27.058] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:22:27.058] <TB3> INFO: ----------------------------------------------------------------------
[10:22:27.325] <TB3> INFO: Expecting 208000 events.
[10:22:37.131] <TB3> INFO: 208000 events read in total (9248ms).
[10:22:37.179] <TB3> INFO: Test took 10119ms.
[10:22:37.421] <TB3> INFO: PixTestAlive::aliveTest() done
[10:22:37.421] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:22:37.423] <TB3> INFO: ----------------------------------------------------------------------
[10:22:37.423] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:22:37.423] <TB3> INFO: ----------------------------------------------------------------------
[10:22:37.701] <TB3> INFO: Expecting 208000 events.
[10:22:43.794] <TB3> INFO: 208000 events read in total (5537ms).
[10:22:43.794] <TB3> INFO: Test took 6369ms.
[10:22:43.795] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:22:44.116] <TB3> INFO: PixTestAlive::maskTest() done
[10:22:44.116] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:22:44.118] <TB3> INFO: ----------------------------------------------------------------------
[10:22:44.118] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:22:44.118] <TB3> INFO: ----------------------------------------------------------------------
[10:22:44.401] <TB3> INFO: Expecting 208000 events.
[10:22:54.312] <TB3> INFO: 208000 events read in total (9355ms).
[10:22:54.312] <TB3> INFO: Test took 10192ms.
[10:22:54.560] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[10:22:54.560] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:22:54.560] <TB3> INFO: PixTestAlive::doTest() done, duration: 27 seconds
[10:22:54.589] <TB3> INFO: enter test to run
[10:22:54.589] <TB3> INFO: test: delay setting parameters: ->2<-
[10:22:54.589] <TB3> INFO: delay test by 2 seconds...
[10:22:56.589] <TB3> INFO: enter test to run
[10:22:56.589] <TB3> INFO: test: HighRate no parameter change
[10:22:56.589] <TB3> INFO: running: highrate
[10:22:56.591] <TB3> INFO: readGainPedestalParameters /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//012_HREfficiency_50//phCalibrationFitErr35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//012_HREfficiency_50//phCalibrationFitErr35_C15.dat
[10:22:56.797] <TB3> INFO: ----------------------------------------------------------------------
[10:22:56.797] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:22:56.797] <TB3> INFO: ----------------------------------------------------------------------
[10:22:57.290] <TB3> INFO: Expecting 208000 events.
[10:23:09.132] <TB3> INFO: 208000 events read in total (11441ms).
[10:23:09.136] <TB3> INFO: Test took 12334ms.
[10:23:09.568] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:23:09.568] <TB3> INFO: number of red-efficiency pixels: 86 94 92 139 201 259 213 197 262 228 329 257 204 128 131 102
[10:23:09.568] <TB3> INFO: number of X-ray hits detected: 70686 75347 65554 117266 117475 142051 134833 131969 146518 155792 161914 136091 127788 75974 84797 81480
[10:23:09.568] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:23:09.568] <TB3> INFO: number of Vcal hits detected: 207914 207905 207906 207855 207794 207734 207775 207802 207730 207760 207651 207728 207788 207863 207865 207898
[10:23:09.568] <TB3> INFO: Vcal hit fiducial efficiency (%): 100.0 100.0 100.0 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.8 99.9 99.9 99.9 99.9 100.0
[10:23:09.568] <TB3> INFO: Vcal hit overall efficiency (%): 100.0 100.0 100.0 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.8 99.9 99.9 99.9 99.9 100.0
[10:23:09.568] <TB3> INFO: X-ray hit rate [MHz/cm2]: 20.7 22.1 19.2 34.4 34.4 41.6 39.5 38.7 42.9 45.7 47.5 39.9 37.5 22.3 24.9 23.9
[10:23:09.568] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[10:23:09.613] <TB3> INFO: PixTest:: pg_setup set to default.
[10:23:09.621] <TB3> INFO: enter test to run
[10:23:09.621] <TB3> INFO: test: no parameter change
[10:23:09.947] <TB3> QUIET: Connection to board 121 closed.
[10:23:10.594] <TB3> INFO: pXar: this is the end, my friend

[10:24:00.529] <TB3> INFO: *** Welcome to pxar ***
[10:24:00.529] <TB3> INFO: *** Today: 2016/08/18
[10:24:00.595] <TB3> INFO: *** Version: f5d3-dirty
[10:24:00.596] <TB3> INFO: readRocDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//013_HREfficiency_75//dacParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//013_HREfficiency_75//dacParameters35_C15.dat
[10:24:00.596] <TB3> INFO: readTbmDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//013_HREfficiency_75//tbmParameters_C0a.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//013_HREfficiency_75//tbmParameters_C0b.dat
[10:24:00.597] <TB3> INFO: readMaskFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//013_HREfficiency_75//defaultMaskFile.dat
[10:24:00.597] <TB3> INFO: readTrimFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//013_HREfficiency_75//trimParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//013_HREfficiency_75//trimParameters35_C15.dat
[10:24:00.712] <TB3> INFO: clk: 4
[10:24:00.712] <TB3> INFO: ctr: 4
[10:24:00.712] <TB3> INFO: sda: 19
[10:24:00.712] <TB3> INFO: tin: 9
[10:24:00.712] <TB3> INFO: level: 15
[10:24:00.712] <TB3> INFO: triggerdelay: 0
[10:24:00.712] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:24:00.712] <TB3> INFO: Log level: INFO
[10:24:00.726] <TB3> INFO: Found DTB DTB_WWV6Z5
[10:24:00.738] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[10:24:00.740] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[10:24:00.742] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[10:24:02.288] <TB3> INFO: DUT info:
[10:24:02.288] <TB3> INFO: The DUT currently contains the following objects:
[10:24:02.288] <TB3> INFO: 2 TBM Cores tbm08c (2 ON)
[10:24:02.288] <TB3> INFO: TBM Core alpha (0): 7 registers set
[10:24:02.288] <TB3> INFO: TBM Core beta (1): 7 registers set
[10:24:02.288] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:24:02.288] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.288] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.288] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.288] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.288] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.288] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.288] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.288] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.288] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.288] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.288] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.288] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.288] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.289] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.289] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.289] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:24:02.689] <TB3> INFO: enter 'restricted' command line mode
[10:24:02.689] <TB3> INFO: enter test to run
[10:24:02.689] <TB3> INFO: test: PixelAlive no parameter change
[10:24:02.689] <TB3> INFO: running: pixelalive
[10:24:02.696] <TB3> INFO: ######################################################################
[10:24:02.696] <TB3> INFO: PixTestAlive::doTest()
[10:24:02.696] <TB3> INFO: ######################################################################
[10:24:02.698] <TB3> INFO: ----------------------------------------------------------------------
[10:24:02.698] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:24:02.698] <TB3> INFO: ----------------------------------------------------------------------
[10:24:02.994] <TB3> INFO: Expecting 208000 events.
[10:24:12.892] <TB3> INFO: 208000 events read in total (9340ms).
[10:24:12.894] <TB3> INFO: Test took 10193ms.
[10:24:13.145] <TB3> INFO: PixTestAlive::aliveTest() done
[10:24:13.145] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:24:13.146] <TB3> INFO: ----------------------------------------------------------------------
[10:24:13.146] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:24:13.146] <TB3> INFO: ----------------------------------------------------------------------
[10:24:13.414] <TB3> INFO: Expecting 208000 events.
[10:24:19.479] <TB3> INFO: 208000 events read in total (5509ms).
[10:24:19.479] <TB3> INFO: Test took 6331ms.
[10:24:19.480] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:24:19.801] <TB3> INFO: PixTestAlive::maskTest() done
[10:24:19.801] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:24:19.803] <TB3> INFO: ----------------------------------------------------------------------
[10:24:19.803] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:24:19.803] <TB3> INFO: ----------------------------------------------------------------------
[10:24:20.066] <TB3> INFO: Expecting 208000 events.
[10:24:29.950] <TB3> INFO: 208000 events read in total (9328ms).
[10:24:29.950] <TB3> INFO: Test took 10145ms.
[10:24:30.202] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[10:24:30.202] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:24:30.202] <TB3> INFO: PixTestAlive::doTest() done, duration: 27 seconds
[10:24:30.234] <TB3> INFO: enter test to run
[10:24:30.234] <TB3> INFO: test: delay setting parameters: ->2<-
[10:24:30.234] <TB3> INFO: delay test by 2 seconds...
[10:24:32.234] <TB3> INFO: enter test to run
[10:24:32.234] <TB3> INFO: test: HighRate no parameter change
[10:24:32.234] <TB3> INFO: running: highrate
[10:24:32.234] <TB3> INFO: readGainPedestalParameters /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//013_HREfficiency_75//phCalibrationFitErr35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//013_HREfficiency_75//phCalibrationFitErr35_C15.dat
[10:24:32.376] <TB3> INFO: ----------------------------------------------------------------------
[10:24:32.376] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:24:32.376] <TB3> INFO: ----------------------------------------------------------------------
[10:24:32.861] <TB3> INFO: Expecting 208000 events.
[10:24:46.048] <TB3> INFO: 208000 events read in total (12786ms).
[10:24:46.054] <TB3> INFO: Test took 13674ms.
[10:24:46.603] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:24:46.603] <TB3> INFO: number of red-efficiency pixels: 121 164 156 298 344 473 431 312 454 463 655 489 326 229 171 174
[10:24:46.603] <TB3> INFO: number of X-ray hits detected: 103332 111497 97170 170605 171643 206433 195564 193008 213619 224582 233457 198658 184387 111761 124382 119343
[10:24:46.603] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:24:46.603] <TB3> INFO: number of Vcal hits detected: 207875 207832 207838 207687 207614 207491 207530 207677 207513 207501 207277 207474 207659 207760 207824 207822
[10:24:46.603] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.9 99.9 99.9 99.9 99.8 99.8 99.8 99.9 99.8 99.8 99.7 99.8 99.8 99.9 99.9 99.9
[10:24:46.603] <TB3> INFO: Vcal hit overall efficiency (%): 99.9 99.9 99.9 99.8 99.8 99.8 99.8 99.8 99.8 99.8 99.7 99.7 99.8 99.9 99.9 99.9
[10:24:46.603] <TB3> INFO: X-ray hit rate [MHz/cm2]: 30.3 32.7 28.5 50.0 50.3 60.5 57.3 56.6 62.6 65.8 68.4 58.2 54.0 32.8 36.5 35.0
[10:24:46.603] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[10:24:46.647] <TB3> INFO: PixTest:: pg_setup set to default.
[10:24:46.656] <TB3> INFO: enter test to run
[10:24:46.656] <TB3> INFO: test: no parameter change
[10:24:46.958] <TB3> QUIET: Connection to board 121 closed.
[10:24:47.038] <TB3> INFO: pXar: this is the end, my friend

[10:25:36.297] <TB3> INFO: *** Welcome to pxar ***
[10:25:36.297] <TB3> INFO: *** Today: 2016/08/18
[10:25:36.359] <TB3> INFO: *** Version: f5d3-dirty
[10:25:36.359] <TB3> INFO: readRocDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//014_HREfficiency_100//dacParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//014_HREfficiency_100//dacParameters35_C15.dat
[10:25:36.360] <TB3> INFO: readTbmDacs: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//014_HREfficiency_100//tbmParameters_C0a.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//014_HREfficiency_100//tbmParameters_C0b.dat
[10:25:36.360] <TB3> INFO: readMaskFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//014_HREfficiency_100//defaultMaskFile.dat
[10:25:36.360] <TB3> INFO: readTrimFile: /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//014_HREfficiency_100//trimParameters35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//014_HREfficiency_100//trimParameters35_C15.dat
[10:25:36.431] <TB3> INFO: clk: 4
[10:25:36.431] <TB3> INFO: ctr: 4
[10:25:36.431] <TB3> INFO: sda: 19
[10:25:36.431] <TB3> INFO: tin: 9
[10:25:36.431] <TB3> INFO: level: 15
[10:25:36.431] <TB3> INFO: triggerdelay: 0
[10:25:36.431] <TB3> QUIET: Instanciating API for pxar v2.7.5+30~g833b08f
[10:25:36.431] <TB3> INFO: Log level: INFO
[10:25:36.443] <TB3> INFO: Found DTB DTB_WWV6Z5
[10:25:36.455] <TB3> QUIET: Connection to board DTB_WWV6Z5 opened.
[10:25:36.457] <TB3> INFO: DTB startup information
--- DTB info------------------------------------------
Board id: 121
HW version: DTB1.2
FW version: 4.4
SW version: 4.6
Options:
USB id: DTB_WWV6Z5
MAC address: 40D855118079
Hostname: pixelDTB121
Comment:
------------------------------------------------------
[10:25:36.459] <TB3> INFO: RPC call hashes of host and DTB match: 484264910
[10:25:38.017] <TB3> INFO: DUT info:
[10:25:38.017] <TB3> INFO: The DUT currently contains the following objects:
[10:25:38.017] <TB3> INFO: 2 TBM Cores tbm08c (2 ON)
[10:25:38.017] <TB3> INFO: TBM Core alpha (0): 7 registers set
[10:25:38.017] <TB3> INFO: TBM Core beta (1): 7 registers set
[10:25:38.017] <TB3> INFO: 16 ROCs psi46digv21respin (16 ON) with 4160 pixelConfigs
[10:25:38.017] <TB3> INFO: ROC 0: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.017] <TB3> INFO: ROC 1: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.017] <TB3> INFO: ROC 2: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.017] <TB3> INFO: ROC 3: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.017] <TB3> INFO: ROC 4: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.017] <TB3> INFO: ROC 5: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.017] <TB3> INFO: ROC 6: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.018] <TB3> INFO: ROC 7: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.018] <TB3> INFO: ROC 8: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.018] <TB3> INFO: ROC 9: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.018] <TB3> INFO: ROC 10: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.018] <TB3> INFO: ROC 11: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.018] <TB3> INFO: ROC 12: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.018] <TB3> INFO: ROC 13: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.018] <TB3> INFO: ROC 14: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.018] <TB3> INFO: ROC 15: 19 DACs set, Pixels: 0 masked, 0 active.
[10:25:38.418] <TB3> INFO: enter 'restricted' command line mode
[10:25:38.418] <TB3> INFO: enter test to run
[10:25:38.418] <TB3> INFO: test: PixelAlive no parameter change
[10:25:38.418] <TB3> INFO: running: pixelalive
[10:25:38.422] <TB3> INFO: ######################################################################
[10:25:38.422] <TB3> INFO: PixTestAlive::doTest()
[10:25:38.422] <TB3> INFO: ######################################################################
[10:25:38.423] <TB3> INFO: ----------------------------------------------------------------------
[10:25:38.423] <TB3> INFO: PixTestAlive::aliveTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:25:38.423] <TB3> INFO: ----------------------------------------------------------------------
[10:25:38.693] <TB3> INFO: Expecting 208000 events.
[10:25:48.655] <TB3> INFO: 208000 events read in total (9404ms).
[10:25:48.708] <TB3> INFO: Test took 10282ms.
[10:25:48.958] <TB3> INFO: PixTestAlive::aliveTest() done
[10:25:48.958] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:25:48.959] <TB3> INFO: ----------------------------------------------------------------------
[10:25:48.959] <TB3> INFO: PixTestAlive::maskTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:25:48.959] <TB3> INFO: ----------------------------------------------------------------------
[10:25:49.223] <TB3> INFO: Expecting 208000 events.
[10:25:55.462] <TB3> INFO: 208000 events read in total (5682ms).
[10:25:55.463] <TB3> INFO: Test took 6501ms.
[10:25:55.463] <TB3> INFO: mask vs. old pixelAlive PixelAlive_C0_V0 .. PixelAlive_C15_V0
[10:25:55.785] <TB3> INFO: PixTestAlive::maskTest() done
[10:25:55.785] <TB3> INFO: number of mask-defect pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:25:55.786] <TB3> INFO: ----------------------------------------------------------------------
[10:25:55.786] <TB3> INFO: PixTestAlive::addressDecodingTest() ntrig = 50, vcal = 200 (ctrlreg = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
[10:25:55.786] <TB3> INFO: ----------------------------------------------------------------------
[10:25:56.053] <TB3> INFO: Expecting 208000 events.
[10:26:05.735] <TB3> INFO: 208000 events read in total (9126ms).
[10:26:05.736] <TB3> INFO: Test took 9947ms.
[10:26:05.989] <TB3> INFO: PixTestAlive::addressDecodingTest() done
[10:26:05.989] <TB3> INFO: number of address-decoding pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:26:05.989] <TB3> INFO: PixTestAlive::doTest() done, duration: 27 seconds
[10:26:06.018] <TB3> INFO: enter test to run
[10:26:06.018] <TB3> INFO: test: delay setting parameters: ->2<-
[10:26:06.019] <TB3> INFO: delay test by 2 seconds...
[10:26:08.019] <TB3> INFO: enter test to run
[10:26:08.019] <TB3> INFO: test: HighRate no parameter change
[10:26:08.019] <TB3> INFO: running: highrate
[10:26:08.019] <TB3> INFO: readGainPedestalParameters /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//014_HREfficiency_100//phCalibrationFitErr35_C0.dat .. /usr/local/data/M4149_XrayQualification_2016-08-18_11h13m_1471511587//014_HREfficiency_100//phCalibrationFitErr35_C15.dat
[10:26:08.152] <TB3> INFO: ----------------------------------------------------------------------
[10:26:08.152] <TB3> INFO: PixTestHighRate::xPixelAlive() ntrig = 50, vcal = 200
[10:26:08.152] <TB3> INFO: ----------------------------------------------------------------------
[10:26:08.639] <TB3> INFO: Expecting 208000 events.
[10:26:23.603] <TB3> INFO: 208000 events read in total (14563ms).
[10:26:23.611] <TB3> INFO: Test took 15454ms.
[10:26:24.323] <TB3> INFO: number of dead pixels (per ROC): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[10:26:24.323] <TB3> INFO: number of red-efficiency pixels: 241 313 326 514 603 1010 943 668 1036 924 1267 948 651 445 338 322
[10:26:24.323] <TB3> INFO: number of X-ray hits detected: 153337 165249 145086 250630 251568 299704 285591 284082 312607 328555 341008 290908 270866 166008 184685 175008
[10:26:24.323] <TB3> INFO: number of triggers sent (total per ROC): 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000 208000
[10:26:24.323] <TB3> INFO: number of Vcal hits detected: 207746 207673 207629 207432 207279 206757 206861 207259 206753 206886 206388 206864 207260 207487 207645 207665
[10:26:24.323] <TB3> INFO: Vcal hit fiducial efficiency (%): 99.9 99.8 99.9 99.8 99.7 99.5 99.5 99.7 99.5 99.5 99.3 99.5 99.7 99.8 99.8 99.8
[10:26:24.323] <TB3> INFO: Vcal hit overall efficiency (%): 99.9 99.8 99.8 99.7 99.7 99.4 99.5 99.6 99.4 99.5 99.2 99.5 99.6 99.8 99.8 99.8
[10:26:24.323] <TB3> INFO: X-ray hit rate [MHz/cm2]: 44.9 48.4 42.5 73.5 73.7 87.8 83.7 83.3 91.6 96.3 100.0 85.3 79.4 48.7 54.1 51.3
[10:26:24.323] <TB3> INFO: PixTestHighRate::doXPixelAlive() done
[10:26:24.368] <TB3> INFO: PixTest:: pg_setup set to default.
[10:26:24.377] <TB3> INFO: enter test to run
[10:26:24.377] <TB3> INFO: test: no parameter change
[10:26:24.671] <TB3> QUIET: Connection to board 121 closed.
[10:26:24.750] <TB3> INFO: pXar: this is the end, my friend