---------- psi46expert ----------
Wed Sep 20 09:18:25 2006
Reading Config-Parameters from defaultDacsOLD/configParameters.dat
Reading TB-Parameters from defaultDacsOLD/tbParameters.dat
Reading Test-Parameters from defaultDacsOLD/testParameters.dat
Reading TBM-Parameters from defaultDacsOLD/tbmParameters.dat
Reading DAC-Parameters from defaultDacsOLD/dacParameters.dat
Reading Trim configuration from defaultDacsOLD/trimParameters.dat
FullTestAndCalib
==>sv> Start Pretest 
timestamp: Wed Sep 20 09:18:31 2006
timestamp: Wed Sep 20 09:18:31 2006
Writing TBM-Parameters to defaultDacsOLD/tbmParameters.dat
Setting data trigger level to -363
Reading Config-Parameters from defaultDacsOLD/configParameters.dat
Writing Config-Parameters to defaultDacsOLD/configParameters.dat
Test if the ROC DACs are programmable
ZeroCurrent 1.300000e-03
Vana set to 127 current: 2.380000e-02
TotalCurrent 2.440000e-02
Writing TB-Parameters to defaultDacsOLD/tbParameters.dat
Adjusting ultrablack levels
Ibias_DAC set to 81 ubLevel: -517
chip 0
CalDel set to 86
VthrComp set to 86
Adjusting VOffsetOp
timestamp: Wed Sep 20 09:18:47 2006
timestamp: Wed Sep 20 09:18:55 2006
Writing DAC-Parameters to defaultDacsOLD/dacParameters.dat
Calibrate Decoder (AddressLevels test)
timestamp: Wed Sep 20 09:18:55 2006
Address levels
Writing decoder levels to defaultDacsOLD/addressParameters.dat
==>sv> End Pretest 
Starting FullTest
==>sv> Start FullTest
==>sv> Start Test
timestamp: Wed Sep 20 09:18:55 2006
timestamp: Wed Sep 20 09:18:55 2006
Temperature TestTemperature test
timestamp: Wed Sep 20 09:18:56 2006
SCurve test
timestamp: Wed Sep 20 09:23:09 2006
TBM test
Test failed: TBM 0: no valid analog readout
Test failed: TBM 1: no valid analog readout
Test failed: Does your testboard have 2 ADCs?timestamp: Wed Sep 20 09:23:10 2006
Starting FullTest for chip 0
timestamp: Wed Sep 20 09:23:10 2006
Pixel Alive
Pixel Alive chip 0
timestamp: Wed Sep 20 09:23:12 2006
Bump bonding
Setting VthrComp to 63
timestamp: Wed Sep 20 09:24:16 2006
TrimBits
timestamp: Wed Sep 20 09:24:51 2006
Temperature test
timestamp: Wed Sep 20 09:24:52 2006
Address decoding
FullTest done for chip 0
timestamp: Wed Sep 20 09:24:55 2006
Temperature TestTemperature test
FullTest done
==>sv> End Test
==>sv> End FullTest
==>sv> Start PhCalibration 
Starting PhCalibration for chip 0
timestamp: Wed Sep 20 09:24:56 2006
timestamp: Wed Sep 20 09:25:28 2006
==>sv> End PhCalibration 
==>sv> Start Trim 
Starting trim algorithm chip 0
timestamp: Wed Sep 20 09:25:28 2006
Setting Vcal to 50
Pixels with threshold 255: 2
Threshold min 95.0, max 120.0 
VthrComp set to 95
Pixels with Vcal 255: 0
Vcal min 50.0, max 84.0 
Vtrim set to 115
Writing DAC-Parameters to defaultDacsOLD/dacParameters.dat50.dat
ROC 0, Writing trim configuration to defaultDacsOLD/trimParameters.dat50.dat
timestamp: Wed Sep 20 09:27:31 2006
==>sv> End Trim 
q