---------- psi46expert ----------
Mon Sep 25 13:52:50 2006
Reading Config-Parameters from ../data/4Aold-10//configParameters.dat
Reading TB-Parameters from ../data/4Aold-10//tbParameters.dat
Reading Test-Parameters from ../data/4Aold-10//testParameters.dat
Reading TBM-Parameters from ../data/4Aold-10//tbmParameters.dat
Reading DAC-Parameters from ../data/4Aold-10//dacParameters_C0.dat
Reading Trim configuration from ../data/4Aold-10//trimParameters_C0.dat
FullTestAndCalib
==>sv> Start Pretest 
timestamp: Mon Sep 25 13:52:58 2006
timestamp: Mon Sep 25 13:52:58 2006
Writing TBM-Parameters to ../data/4Aold-10//tbmParameters.dat
Setting data trigger level to -648
Reading Config-Parameters from ../data/4Aold-10//configParameters.dat
Writing Config-Parameters to ../data/4Aold-10//configParameters.dat
Test if the ROC DACs are programmable
ZeroCurrent 1.100000e-03
Vana set to 142 current: 2.420000e-02
TotalCurrent 2.580000e-02
Writing TB-Parameters to ../data/4Aold-10//tbParameters.dat
Adjusting ultrablack levels
Ibias_DAC set to 98 ubLevel: -700
chip 0
CalDel set to 81
VthrComp set to 85
Adjusting VOffsetOp
timestamp: Mon Sep 25 13:53:13 2006
timestamp: Mon Sep 25 13:53:20 2006
Writing DAC-Parameters to ../data/4Aold-10//dacParameters_C0.dat
Calibrate Decoder (AddressLevels test)
timestamp: Mon Sep 25 13:53:20 2006
Address levels
Writing decoder levels to ../data/4Aold-10//addressParameters.dat
==>sv> End Pretest 
Starting FullTest
==>sv> Start FullTest
==>sv> Start Test
timestamp: Mon Sep 25 13:53:21 2006
timestamp: Mon Sep 25 13:53:21 2006
Temperature TestTemperature test
timestamp: Mon Sep 25 13:53:22 2006
SCurve test
timestamp: Mon Sep 25 13:57:33 2006
TBM test
Test failed: TBM 0: no valid analog readout
Test failed: TBM 0: no valid dual analog readout
Test failed: TBM 1: no valid analog readout
Test failed: Does your testboard have 2 ADCs?timestamp: Mon Sep 25 13:57:35 2006
Starting FullTest for chip 0
timestamp: Mon Sep 25 13:57:35 2006
Pixel Alive
Pixel Alive chip 0
Pixel 45 : 20 dead: n = 0
timestamp: Mon Sep 25 13:57:37 2006
Bump bonding
Setting VthrComp to 71
timestamp: Mon Sep 25 13:58:33 2006
TrimBits
timestamp: Mon Sep 25 13:59:08 2006
Temperature test
timestamp: Mon Sep 25 13:59:09 2006
Address decoding
Pixel (45, 20) on ROC0: Decoding error
FullTest done for chip 0
timestamp: Mon Sep 25 13:59:12 2006
Temperature TestTemperature test
FullTest done
==>sv> End Test
==>sv> End FullTest
==>sv> Start PhCalibration 
Starting PhCalibration for chip 0
timestamp: Mon Sep 25 13:59:13 2006
timestamp: Mon Sep 25 13:59:45 2006
==>sv> End PhCalibration 
==>sv> Start Trim 
Starting trim algorithm chip 0
timestamp: Mon Sep 25 13:59:45 2006
Setting Vcal to 50
Pixels with threshold 255: 2
Threshold min 85.0, max 118.0 
VthrComp set to 85
Pixels with Vcal 255: 1
Vcal min 50.0, max 87.0 
Vtrim set to 141
Writing DAC-Parameters to ../data/4Aold-10//dacParameters50_C0.dat
ROC 0, Writing trim configuration to ../data/4Aold-10//trimParameters50_C0.dat
timestamp: Mon Sep 25 14:02:32 2006
==>sv> End Trim 
q