---------- psi46expert ----------
Wed Sep 20 14:05:05 2006
Reading Config-Parameters from ../data/0Aold-10//configParameters.dat
Reading TB-Parameters from ../data/0Aold-10//tbParameters.dat
Reading Test-Parameters from ../data/0Aold-10//testParameters.dat
Reading TBM-Parameters from ../data/0Aold-10//tbmParameters.dat
Reading DAC-Parameters from ../data/0Aold-10//dacParameters_C0.dat
Reading Trim configuration from ../data/0Aold-10//trimParameters_C0.dat
FullTestAndCalib
==>sv> Start Pretest 
timestamp: Wed Sep 20 14:06:31 2006
timestamp: Wed Sep 20 14:06:31 2006
Writing TBM-Parameters to ../data/0Aold-10//tbmParameters.dat
Setting data trigger level to -655
Reading Config-Parameters from ../data/0Aold-10//configParameters.dat
Writing Config-Parameters to ../data/0Aold-10//configParameters.dat
Test if the ROC DACs are programmable
ZeroCurrent 1.100000e-03
Vana set to 148 current: 2.400000e-02
TotalCurrent 2.530000e-02
Writing TB-Parameters to ../data/0Aold-10//tbParameters.dat
Adjusting ultrablack levels
Ibias_DAC set to 108 ubLevel: -717
chip 0
CalDel set to 100
VthrComp set to 89
Adjusting VOffsetOp
timestamp: Wed Sep 20 14:06:47 2006
timestamp: Wed Sep 20 14:06:55 2006
Writing DAC-Parameters to ../data/0Aold-10//dacParameters_C0.dat
Calibrate Decoder (AddressLevels test)
timestamp: Wed Sep 20 14:06:55 2006
Address levels
Writing decoder levels to ../data/0Aold-10//addressParameters.dat
==>sv> End Pretest 
Starting FullTest
==>sv> Start FullTest
==>sv> Start Test
timestamp: Wed Sep 20 14:06:55 2006
timestamp: Wed Sep 20 14:06:55 2006
Temperature TestTemperature test
timestamp: Wed Sep 20 14:06:57 2006
SCurve test
timestamp: Wed Sep 20 14:11:08 2006
TBM test
Test failed: TBM 0: no valid analog readout
Test failed: TBM 1: no valid analog readout
Test failed: Does your testboard have 2 ADCs?timestamp: Wed Sep 20 14:11:11 2006
Starting FullTest for chip 0
timestamp: Wed Sep 20 14:11:11 2006
Pixel Alive
Pixel Alive chip 0
timestamp: Wed Sep 20 14:11:13 2006
Bump bonding
Setting VthrComp to 69
timestamp: Wed Sep 20 14:12:16 2006
TrimBits
timestamp: Wed Sep 20 14:12:54 2006
Temperature test
timestamp: Wed Sep 20 14:12:55 2006
Address decoding
FullTest done for chip 0
timestamp: Wed Sep 20 14:12:57 2006
Temperature TestTemperature test
FullTest done
==>sv> End Test
==>sv> End FullTest
==>sv> Start PhCalibration 
Starting PhCalibration for chip 0
timestamp: Wed Sep 20 14:12:58 2006
timestamp: Wed Sep 20 14:13:31 2006
==>sv> End PhCalibration 
==>sv> Start Trim 
Starting trim algorithm chip 0
timestamp: Wed Sep 20 14:13:31 2006
Setting Vcal to 50
Pixels with threshold 255: 0
Threshold min 91.0, max 111.0 
VthrComp set to 91
Pixels with Vcal 255: 0
Vcal min 48.0, max 88.0 
Vtrim set to 150
Writing DAC-Parameters to ../data/0Aold-10//dacParameters_C0.dat50.dat
ROC 0, Writing trim configuration to ../data/0Aold-10//trimParameters_C0.dat50.dat
timestamp: Wed Sep 20 14:16:20 2006
==>sv> End Trim 
q